OER Development and Promotion. Outcomes of an International Research Project on the OpenCourseWare Model

In this paper, we describe the successful results of an international research project focused on the use of Web technology in the educational context. The article explains how this international project, funded by public organizations and developed over the last two academic years, focuses on the area of open educational resources (OER) and particularly the educational content of the OpenCourseWare (OCW) model. This initiative has been developed by a research group composed of researchers from three countries. The project was enabled by the Universidad Politécnica de Madrid OCW Office�s leadership of the Consortium of Latin American Universities and the distance education know-how of the Universidad Técnica Particular de Loja (UTPL, Ecuador). We give a full account of the project, methodology, main outcomes and validation. The project results have further consolidated the group, and increased the maturity of group members and networking with other groups in the area. The group is now participating in other research projects that continue the lines developed here

Temperature Sensor Placement Including Routing Overhead and Sampling Inaccuracies

Dynamic thermal management techniques require a collection of on-chip thermal sensors that imply a significant area and power overhead. Finding the optimum number of temperature monitors and their location on the chip surface to optimize accuracy is an NP-hard problem. In this work we improve the modeling of the problem by including area, power and networking constraints along with the consideration of three inaccuracy terms: spatial errors, sampling rate errors and monitor-inherent errors. The problem is solved by the simulated annealing algorithm. We apply the algorithm to a test case employing three different types of monitors to highlight the importance of the different metrics. Finally we present a case study of the Alpha 21364 processor under two different constraint scenarios.

Secure optical networks based on quantum key distribution and weakly trusted repeaters

Abstract—In this paper we explore how recent technologies can improve the security of optical networks. In particular, we study how to use quantum key distribution(QKD) in common optical network infrastructures and propose a method to overcome its distance limitations. QKD is the first technology offering information theoretic secretkey distribution that relies only on the fundamental principles of quantum physics. Point-to-point QKDdevices have reached a mature industrial state; however, these devices are severely limited in distance, since signals at the quantum level (e.g., single photons) are highly affected by the losses in the communication channel and intermediate devices. To overcome this limitation, intermediate nodes (i.e., repeaters) are used. Both quantum-regime and trusted, classical repeaters have been proposed in the QKD literature, but only the latter can be implemented in practice. As a novelty, we propose here a new QKD network model based on the use of not fully trusted intermediate nodes, referred to as weakly trusted repeaters. This approach forces the attacker to simultaneously break several paths to get access to the exchanged key, thus improving significantly the security of the network. We formalize the model using network codes and provide real scenarios that allow users to exchange secure keys over metropolitan optical networks using only passive components. Moreover, the theoretical framework allows one to extend these scenarios not only to accommodate more complex trust constraints, but also to consider robustness and resiliency constraints on the network.

A multidisciplinary reference framework to support innovative design, implementation and assessment of chronic care models

Hoy en día, por primera vez en la historia, la mayor parte de la población podrá vivir hasta los sesenta años y más (United Nations, 2015). Sin embargo, todavía existe poca evidencia que demuestre que las personas mayores, estén viviendo con mejor salud que sus padres, a la misma edad, ya que la mayoría de los problemas de salud en edades avanzadas están asociados a las enfermedades crónicas (WHO, 2015). Los sistemas sanitarios de los países desarrollados funcionan adecuadamente cuando se trata del cuidado de enfermedades agudas, pero no son lo suficientemente eficaces en la gestión de las enfermedades crónicas. Durante la última década, se han realizado esfuerzos para mejorar esta gestión, por medio de la utilización de estrategias de prevención y de reenfoque de la provisión de los servicios de atención para la salud (Kane et al. 2005). Según una revisión sistemática de modelos de cuidado de salud, comisionada por el sistema nacional de salud Británico, pocos modelos han conceptualizado cuáles son los componentes que hay que utilizar para proporcionar un cuidado crónico efectivo, y estos componentes no han sido suficientemente estructurados y articulados. Por lo tanto, no hay suficiente evidencia sobre el impacto real de cualquier modelo existente en la actualidad (Ham, 2006). Las innovaciones podrían ayudar a conseguir mejores diagnósticos, tratamientos y gestión de pacientes crónicos, así como a dar soporte a los profesionales y a los pacientes en el cuidado. Sin embargo, la forma en las que estas innovaciones se proporcionan no es lo suficientemente eficiente, efectiva y amigable para el usuario. Para mejorar esto, hace falta crear equipos de trabajo y estrategias multidisciplinares. En conclusión, hacen falta actividades que permitan conseguir que las innovaciones sean utilizadas en los sistemas de salud que quieren mejorar la gestión del cuidado crónico, para que sea posible: 1) traducir la “atención sanitaria basada en la evidencia” en “conocimiento factible”; 2) hacer frente a la complejidad de la atención sanitaria a través de una investigación multidisciplinaria; 3) identificar una aproximación sistemática para que se establezcan intervenciones innovadoras en el cuidado de salud. El marco de referencia desarrollado en este trabajo de investigación es un intento de aportar estas mejoras. Las siguientes hipótesis han sido propuestas: Hipótesis 1: es posible definir un proceso de traducción que convierta un modelo de cuidado crónico en una descripción estructurada de objetivos, requisitos e indicadores clave de rendimiento. Hipótesis 2: el proceso de traducción, si se ejecuta a través de elementos basados en la evidencia, multidisciplinares y de orientación económica, puede convertir un modelo de cuidado crónico en un marco descriptivo, que define el ciclo de vida de soluciones innovadoras para el cuidado de enfermedades crónicas. Hipótesis 3: es posible definir un método para evaluar procesos, resultados y capacidad de desarrollar habilidades, y asistir equipos multidisciplinares en la creación de soluciones innovadoras para el cuidado crónico. Hipótesis 4: es posible dar soporte al desarrollo de soluciones innovadoras para el cuidado crónico a través de un marco de referencia y conseguir efectos positivos, medidos en indicadores clave de rendimiento. Para verificar las hipótesis, se ha definido una aproximación metodológica compuesta de cuatro Fases, cada una asociada a una hipótesis. Antes de esto, se ha llevado a cabo una “Fase 0”, donde se han analizado los antecedentes sobre el problema (i.e. adopción sistemática de la innovación en el cuidado crónico) desde una perspectiva multi-dominio y multi-disciplinar. Durante la fase 1, se ha desarrollado un Proceso de Traducción del Conocimiento, elaborado a partir del JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare (Pearson, 2005), y sobre el cual se han definido cuatro Bloques de Innovación. Estos bloques consisten en una descripción de elementos innovadores, definidos en la fase 0, que han sido añadidos a los cuatros elementos que componen el modelo JBI. El trabajo llevado a cabo en esta fase ha servido también para definir los materiales que el proceso de traducción tiene que ejecutar. La traducción que se ha llevado a cabo en la fase 2, y que traduce la mejor evidencia disponible de cuidado crónico en acción: resultado de este proceso de traducción es la parte descriptiva del marco de referencia, que consiste en una descripción de un modelo de cuidado crónico (se ha elegido el Chronic Care Model, Wagner, 1996) en términos de objetivos, especificaciones e indicadores clave de rendimiento y organizada en tres ciclos de innovación (diseño, implementación y evaluación). Este resultado ha permitido verificar la segunda hipótesis. Durante la fase 3, para demostrar la tercera hipótesis, se ha desarrollado un método-mixto de evaluación de equipos multidisciplinares que trabajan en innovaciones para el cuidado crónico. Este método se ha creado a partir del método mixto usado para la evaluación de equipo multidisciplinares translacionales (Wooden, 2013). El método creado añade una dimensión procedural al marco. El resultado de esta fase consiste, por lo tanto, en una primera versión del marco de referencia, lista para ser experimentada. En la fase 4, se ha validado el marco a través de un caso de estudio multinivel y con técnicas de observación-participante como método de recolección de datos. Como caso de estudio se han elegido las actividades de investigación que el grupo de investigación LifeStech ha desarrollado desde el 2008 para mejorar la gestión de la diabetes, actividades realizadas en un contexto internacional. Los resultados demuestran que el marco ha permitido mejorar las actividades de trabajo en distintos niveles: 1) la calidad y cantidad de las publicaciones; 2) se han conseguido dos contratos de investigación sobre diabetes: el primero es un proyecto de investigación aplicada, el segundo es un proyecto financiado para acelerar las innovaciones en el mercado; 3) a través de los indicadores claves de rendimiento propuestos en el marco, una prueba de concepto de un prototipo desarrollado en un proyecto de investigación ha sido transformada en una evaluación temprana de una intervención eHealth para el manejo de la diabetes, que ha sido recientemente incluida en Repositorio de prácticas innovadoras del Partenariado de Innovación Europeo en Envejecimiento saludable y activo. La verificación de las 4 hipótesis ha permitido demonstrar la hipótesis principal de este trabajo de investigación: es posible contribuir a crear un puente entre la atención sanitaria y la innovación y, por lo tanto, mejorar la manera en que el cuidado crónico sea procurado en los sistemas sanitarios. ABSTRACT Nowadays, for the first time in history, most people can expect to live into their sixties and beyond (United Nations, 2015). However, little evidence suggests that older people are experiencing better health than their parents, and most of the health problems of older age are linked to Chronic Diseases (WHO, 2015). The established health care systems in developed countries are well suited to the treatment of acute diseases but are mostly inadequate for dealing with CDs. Healthcare systems are challenging the burden of chronic diseases by putting more emphasis on the prevention of disease and by looking for new ways to reorient the provision of care (Kane et al., 2005). According to an evidence-based review commissioned by the British NHS Institute, few models have conceptualized effective components of care for CDs and these components have been not structured and articulated. “Consequently, there is limited evidence about the real impact of any of the existing models” (Ham, 2006). Innovations could support to achieve better diagnosis, treatment and management for patients across the continuum of care, by supporting health professionals and empowering patients to take responsibility. However, the way they are delivered is not sufficiently efficient, effective and consumer friendly. The improvement of innovation delivery, involves the creation of multidisciplinary research teams and taskforces, rather than just working teams. There are several actions to improve the adoption of innovations from healthcare systems that are tackling the epidemics of CDs: 1) Translate Evidence-Based Healthcare (EBH) into actionable knowledge; 2) Face the complexity of healthcare through multidisciplinary research; 3) Identify a systematic approach to support effective implementation of healthcare interventions through innovation. The framework proposed in this research work is an attempt to provide these improvements. The following hypotheses have been drafted: Hypothesis 1: it is possible to define a translation process to convert a model of chronic care into a structured description of goals, requirements and key performance indicators. Hypothesis 2: a translation process, if executed through evidence-based, multidisciplinary, holistic and business-oriented elements, can convert a model of chronic care in a descriptive framework, which defines the whole development cycle of innovative solutions for chronic disease management. Hypothesis 3: it is possible to design a method to evaluate processes, outcomes and skill acquisition capacities, and assist multidisciplinary research teams in the creation of innovative solutions for chronic disease management. Hypothesis 4: it is possible to assist the development of innovative solutions for chronic disease management through a reference framework and produce positive effects, measured through key performance indicators. In order to verify the hypotheses, a methodological approach, composed of four Phases that correspond to each one of the stated hypothesis, was defined. Prior to this, a “Phase 0”, consisting in a multi-domain and multi-disciplinary background analysis of the problem (i.e.: systematic adoption of innovation to chronic care), was carried out. During phase 1, in order to verify the first hypothesis, a Knowledge Translation Process (KTP) was developed, starting from the JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare was used (Pearson, 2005) and adding Four Innovation Blocks. These blocks represent an enriched description, added to the JBI model, to accelerate the transformation of evidence-healthcare through innovation; the innovation blocks are built on top of the conclusions drawn after Phase 0. The background analysis gave also indication on the materials and methods to be used for the execution of the KTP, carried out during phase 2, that translates the actual best available evidence for chronic care into action: this resulted in a descriptive Framework, which is a description of a model of chronic care (the Chronic Care Model was chosen, Wagner, 1996) in terms of goals, specified requirements and Key Performance Indicators, and articulated in the three development cycles of innovation (i.e. design, implementation and evaluation). Thanks to this result the second hypothesis was verified. During phase 3, in order to verify the third hypothesis, a mixed-method to evaluate multidisciplinary teams working on innovations for chronic care, was created, based on a mixed-method used for the evaluation of Multidisciplinary Translational Teams (Wooden, 2013). This method adds a procedural dimension to the descriptive component of the Framework, The result of this phase consisted in a draft version of the framework, ready to be tested in a real scenario. During phase 4, a single and multilevel case study, with participant-observation data collection, was carried out, in order to have a complete but at the same time multi-sectorial evaluation of the framework. The activities that the LifeStech research group carried out since 2008 to improve the management of diabetes have been selected as case study. The results achieved showed that the framework allowed to improve the research activities in different directions: the quality and quantity of the research publications that LifeStech has issued, have increased substantially; 2 project grants to improve the management of diabetes, have been assigned: the first is a grant funding applied research while the second is about accelerating innovations into the market; by using the assessment KPIs of the framework, the proof of concept validation of a prototype developed in a research project was transformed into an early stage assessment of innovative eHealth intervention for Diabetes Management, which has been recently included in the repository of innovative practice of the European Innovation Partnership on Active and Health Ageing initiative. The verification of the 4 hypotheses lead to verify the main hypothesis of this research work: it is possible to contribute to bridge the gap between healthcare and innovation and, in turn, improve the way chronic care is delivered by healthcare systems.

Development of a Dashboard for Sentiment Analysis of Football in Twitter based on Web Components and D3.js

This thesis is the result of a project whose objective has been to develop and deploy a dashboard for sentiment analysis of football in Twitter based on web components and D3.js. To do so, a visualisation server has been developed in order to present the data obtained from Twitter and analysed with Senpy. This visualisation server has been developed with Polymer web components and D3.js. Data mining has been done with a pipeline between Twitter, Senpy and ElasticSearch. Luigi have been used in this process because helps building complex pipelines of batch jobs, so it has analysed all tweets and stored them in ElasticSearch. To continue, D3.js has been used to create interactive widgets that make data easily accessible, this widgets will allow the user to interact with them and �filter the most interesting data for him. Polymer web components have been used to make this dashboard according to Google's material design and be able to show dynamic data in widgets. As a result, this project will allow an extensive analysis of the social network, pointing out the influence of players and teams and the emotions and sentiments that emerge in a lapse of time.

VLC-based light-weight portable user interface for in-house applications.

Advances in solid-state lighting have overcome common limitations on optical wireless such as power needs due to light dispersion. It's been recently proposed the modification of lamp's drivers to take advantages of its switching behaviour to include data links maintaining the illumination control they provide. In this paper, a remote access application using visible light communications is presented that provides wireless access to a remote computer using a touchscreen as user interface

Wireless Sensor Network based on OCDMA for closed environments

An infrared optical wireless system is presented, consisting on autonomous remote nodes communicating with a central node. The network is designed for telecommand/telemetry purposes, comprising a large number of nodes at a low data rate. Simultaneous access is granted by using CDMA techniques, and an appropriate selection of the code family can also keep power consumption to a minimum

Semantic middleware development for the Internet of Things

After the extraordinary spread of the World Wide Web during the last fifteen years, engineers and developers are pushing now the Internet to its next border. A new conception in computer science and networks communication has been burgeoning during roughly the last decade: a world where most of the computers of the future will be extremely downsized, to the point that they will look like dust at its most advanced prototypes. In this vision, every single element of our “real” world has an intelligent tag that carries all their relevant data, effectively mapping the “real” world into a “virtual” one, where all the electronically augmented objects are present, can interact among them and influence with their behaviour that of the other objects, or even the behaviour of a final human user. This is the vision of the Internet of the Future, which also draws ideas of several novel tendencies in computer science and networking, as pervasive computing and the Internet of Things. As it has happened before, materializing a new paradigm that changes the way entities interrelate in this new environment has proved to be a goal full of challenges in the way. Right now the situation is exciting, with a plethora of new developments, proposals and models sprouting every time, often in an uncoordinated, decentralised manner away from any standardization, resembling somehow the status quo of the first developments of advanced computer networking, back in the 60s and the 70s. Usually, a system designed after the Internet of the Future will consist of one or several final user devices attached to these final users, a network –often a Wireless Sensor Network- charged with the task of collecting data for the final user devices, and sometimes a base station sending the data for its further processing to less hardware-constrained computers. When implementing a system designed with the Internet of the Future as a pattern, issues, and more specifically, limitations, that must be faced are numerous: lack of standards for platforms and protocols, processing bottlenecks, low battery lifetime, etc. One of the main objectives of this project is presenting a functional model of how a system based on the paradigms linked to the Internet of the Future works, overcoming some of the difficulties that can be expected and showing a model for a middleware architecture specifically designed for a pervasive, ubiquitous system. This Final Degree Dissertation is divided into several parts. Beginning with an Introduction to the main topics and concepts of this new model, a State of the Art is offered so as to provide a technological background. After that, an example of a semantic and service-oriented middleware is shown; later, a system built by means of this semantic and service-oriented middleware, and other components, is developed, justifying its placement in a particular scenario, describing it and analysing the data obtained from it. Finally, the conclusions inferred from this system and future works that would be good to be tackled are mentioned as well. RESUMEN Tras el extraordinario desarrollo de la Web durante los últimos quince años, ingenieros y desarrolladores empujan Internet hacia su siguiente frontera. Una nueva concepción en la computación y la comunicación a través de las redes ha estado floreciendo durante la última década; un mundo donde la mayoría de los ordenadores del futuro serán extremadamente reducidas de tamaño, hasta el punto que parecerán polvo en sus más avanzado prototipos. En esta visión, cada uno de los elementos de nuestro mundo “real” tiene una etiqueta inteligente que porta sus datos relevantes, mapeando de manera efectiva el mundo “real” en uno “virtual”, donde todos los objetos electrónicamente aumentados están presentes, pueden interactuar entre ellos e influenciar con su comportamiento el de los otros, o incluso el comportamiento del usuario final humano. Ésta es la visión del Internet del Futuro, que también toma ideas de varias tendencias nuevas en las ciencias de la computación y las redes de ordenadores, como la computación omnipresente y el Internet de las Cosas. Como ha sucedido antes, materializar un nuevo paradigma que cambia la manera en que las entidades se interrelacionan en este nuevo entorno ha demostrado ser una meta llena de retos en el camino. Ahora mismo la situación es emocionante, con una plétora de nuevos desarrollos, propuestas y modelos brotando todo el rato, a menudo de una manera descoordinada y descentralizada lejos de cualquier estandarización, recordando de alguna manera el estado de cosas de los primeros desarrollos de redes de ordenadores avanzadas, allá por los años 60 y 70. Normalmente, un sistema diseñado con el Internet del futuro como modelo consistirá en uno o varios dispositivos para usuario final sujetos a estos usuarios finales, una red –a menudo, una red de sensores inalámbricos- encargada de recolectar datos para los dispositivos de usuario final, y a veces una estación base enviando los datos para su consiguiente procesado en ordenadores menos limitados en hardware. Al implementar un sistema diseñado con el Internet del futuro como patrón, los problemas, y más específicamente, las limitaciones que deben enfrentarse son numerosas: falta de estándares para plataformas y protocolos, cuellos de botella en el procesado, bajo tiempo de vida de las baterías, etc. Uno de los principales objetivos de este Proyecto Fin de Carrera es presentar un modelo funcional de cómo trabaja un sistema basado en los paradigmas relacionados al Internet del futuro, superando algunas de las dificultades que pueden esperarse y mostrando un modelo de una arquitectura middleware específicamente diseñado para un sistema omnipresente y ubicuo. Este Proyecto Fin de Carrera está dividido en varias partes. Empezando por una introducción a los principales temas y conceptos de este modelo, un estado del arte es ofrecido para proveer un trasfondo tecnológico. Después de eso, se muestra un ejemplo de middleware semántico orientado a servicios; después, se desarrolla un sistema construido por medio de este middleware semántico orientado a servicios, justificando su localización en un escenario particular, describiéndolo y analizando los datos obtenidos de él. Finalmente, las conclusiones extraídas de este sistema y las futuras tareas que sería bueno tratar también son mencionadas.

Implementing distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. The user primitives available are presented and their implementation described. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. Finally, the CIAO WWW interface is also briefly described. The unctionalities of the system are illustrated through examples, using the implemented primitives.

Distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. It presents the user primitives available and describes their implementation. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. The functionalities of the system are illustrated through examples, using the implemented primitives. The implementation of most of the primitives is also described in detail.

Influencia de la información termográfica infrarroja en el protocolo de prevención de lesiones de un equipo de fútbol profesional español

El fútbol es un deporte en cuya práctica existe una alta incidencia de lesión. Además, en el ámbito profesional las lesiones suponen un duro proceso de recuperación para el futbolista, una reducción del rendimiento deportivo para éste y para el equipo, y unos grandes costes económicos para el club. Dentro de esta problemática, la bibliografía consultada concluye que en las pretemporadas se produce una mayor incidencia de lesión por sobrecarga, es decir, sin contacto; un tipo de lesiones que está a nuestro alcance poder prevenir. Por ello, consideramos importante el conocer y desarrollar métodos, herramientas y principios para obtener programas preventivos efectivos, que reduzcan las elevadas cifras de incidencia de lesión mostradas por la literatura. El presente estudio observa y registra las lesiones, a través del cuestionario F-MARC, de un equipo profesional de fútbol de la Liga Española durante las pretemporadas 2008 (n=24) y 2009 (n=24). Además, durante la pretemporada 2009 se aplicó la termografía infrarroja para adquirir información sobre la asimilación de la carga de entrenamiento por parte de los jugadores, y dicha información se utilizarón para mejorar las tomas de decisiones de protocolos post-ejercicio específicos en prevención de lesiones, los cuales fueron los mismos que se utilizaron previamente en la pretemporada 2008. El estudio tiene un diseño con características pre-post sin grupo de control. Es un estudio longitudinal donde, tras un registro inicial de lesiones en la pretemporada 2008, los sujetos fueron expuestos a la variable independiente, utilización de la termografía infrarroja, en el protocolo de prevención de lesiones durante la pretemporada 2009. Los resultados de este trabajo muestran una reducción significativa de hasta el 60% en la frecuencia de lesión durante la pretemporada 2009, y un descenso de la incidencia de lesión total que pasa de 8,3 lesiones por cada 1000 horas de exposición en 2008 a 3,4 en 2009. Con ello, la probabilidad de lesión se redujo considerablemente pasando de un 85% de los jugadores lesionados en 2008 a un 26% en 2009; además, las lesiones de carácter muscular descendieron en 2009 un 70% con respecto al 2008, y los días de baja que causaron todas las lesiones pasó a reducirse un 91,8% en la pretemporada 2009. Por otro lado, el perfil térmico de los jugadores en función de su lateralidad y dominancia, guarda una gran similitud en sus temperaturas, tanto medias como máximas, con temperaturas más elevadas en la zona corporal lumbar y poplítea, y con temperaturas más bajas en tobillos y rodillas. Todas las zonas corporales estudiadas, exceptuando el tobillo (p<0,05), no presentan diferencias significativas entre ambos hemicuerpos, estableciendo un promedio de diferencia entre ambos lados de 0,06±0,16 ºC. Teniendo en cuenta estos resultados, consideramos el límite superior de normalidad de asimetría térmica bilateral en 0,3ºC para todas las zonas corporales estudiadas del miembro inferior exceptuando los tobillos. El parámetro ambiental que más relación tiene con la temperatura registrada por la cámara termográfica es la temperatura de la sala con un coeficiente de correlación cercano a r=1,00, seguido de la presión atmosférica con un coeficiente de correlación cercano r=0,50, y, por último, la humedad que no guarda ningún tipo de relación con la temperatura registrada en cada zona corporal en el rango de valores considerados en el estudio. Por otro lado, los resultados del ANOVA de un factor nos indican que existen diferencias de medias entre los tres grupos formados de temperatura ambiente de sala (1º=18º-21ºC, 2º=22º-24ºC y 3º=25º-31ºC). Además, los resultados de la prueba HSD de Tukey nos indican que existen diferencias entre cada uno de los grupos en todas las zonas corporales estudiadas exceptuando los tobillos. Por último, se propone la ecuación; TC-estándar = TC-real – [0,184 * (TS – 21ºC)] para predecir la influencia de la temperatura ambiente sobre la temperatura registrada por la cámara termográfica. Para concluir, tras los resultados obtenidos, podemos afirmar que la aplicación de un protocolo post-ejercicio de prevención de lesiones basado en la información adquirida a través de valoraciones con termografía infrarroja reduce la incidencia de lesión en el grupo de futbolistas profesionales estudiado. Tenemos que ser conscientes que nos encontramos ante un estudio de campo, donde existen muchos factores que han podido influenciar en los resultados y que son difíciles de controlar. Por lo tanto, debemos ser cautos y concluir que la información adquirida de las evaluaciones termográficas ha sido uno de los aspectos que ayudó a la reducción significativa de la incidencia de lesión en la pretemporada 2009 en el equipo de fútbol profesional español de este estudio, pero que seguramente hayan podido existir otros factores que también hayan favorecido este hecho. ABSTRACT Soccer is a sport with a high incidence of injury. Moreover, in professional soccer injuries lead to a tough recovery process for the players, a reduction athletic performance for them and for their teams, and large economic costs for the club. In this issue, the literature concludes that in the preseason a greater incidence of overuse injury occurs (ie, without contact), and this is a type of injury that we can prevent. Therefore, we consider that it is important to know and develop methods, tools and principles to obtain effective preventive programs that reduce the high injury incidence figures shown in the literature. This study observed and recorded injuries, through the questionnaire F-MARC, from a professional soccer team in the Spanish league during the preseason 2008 (n = 24) and 2009 (n = 24). Moreover, during the 2009 preseason infrared thermography was applied to acquire information about the assimilation of the training load by the players, and this information was used to improve the decision making in the specific post-exercise injury prevention protocols, which were the same used in the previous season 2008. The study had a pre-post design without control group. Is a longitudinal study where, after an initial registration of injuries in the 2008 preseason, subjects were exposed to the independent variable, using infrared thermography, included in the protocol for injury prevention during the 2009 preseason. The results of this study show a significant reduction of up to 60% in the frequency of injury during the 2009 preseason, and a decrease in total injury incidence passing from 8.3 injuries per 1000 hours of exposure in 2008 to 3.4 in 2008. With this, the likelihood of injury decreased significantly from 85% of the players injuried in 2008 to 26% in 2009, also muscle injuries in 2009 fell 70% compared to 2008, and sick leave days that caused by all the injuries happened were reduced a 91.8% in the 2009 preseason. On the other hand, the thermal profile of the players according to their laterality and dominance, is quiet similar in their temperatures, both average and maximum values, with an estimated average of the highest temperatures in the lower back and popliteal areas in the back areas, and lower temperatures in the ankles and knees. All body areas studied, except for the ankle (p <0.05), had no significant differences between both sides of the body, establishing an average difference between both sides of 0.06 ± 0.16 °C. Given these results, we consider the upper limit of normal bilateral thermal asymmetry 0.3 °C for all body areas studied in the lower limb except for ankles. The environmental parameter higher related with temperature recorded by the camera is the temperature of the room with a correlation coefficient close to r = 1.00, followed by atmospheric pressure with a correlation coefficient near r = 0.50, and finally, the humidity that, in the range of values considered in the study, it is not related with temperature in each body area. On the other hand, the results of one-way ANOVA indicate that there are differences between the three temperature of the room groups (1 ° = 18-21 °C, 2 º = 22-24 ºC and 3 º = 25-31 ºC). Moreover, the results of the Tukey HSD test indicate that there are differences between each of the groups for all body areas studied except the ankles. Finally, we propose the equation TC-standard = TC-real – [0,184 * (TS – 21ºC)] to predict the influence of temperature on the temperature recorded by the thermographic camera. In conclusion, we can say from our results that the implementation of a post-exercise injury prevention protocol based on information from assessments with infrared thermography reduces the incidence of injury in professional soccer players. We must be aware that we are facing a field study, where there are many factors that could influence the results and they are difficult to control. Therefore, we must be cautious and conclude that the information acquired from the thermographic evaluation has been one of the aspects that helped to significantly reduce the incidence of injury in the preseason 2009 in the Spanish professional football team, but probably they could exist other factors with a positive effect on the reduction of the injury rates.

Simulation of impulse response for indoor visible light communications using 3D CAD models

n this article, a tool for simulating the channel impulse response for indoor visible light communications using 3D computer-aided design (CAD) models is presented. The simulation tool is based on a previous Monte Carlo ray-tracing algorithm for indoor infrared channel estimation, but including wavelength response evaluation. The 3D scene, or the simulation environment, can be defined using any CAD software in which the user specifies, in addition to the setting geometry, the reflection characteristics of the surface materials as well as the structures of the emitters and receivers involved in the simulation. Also, in an effort to improve the computational efficiency, two optimizations are proposed. The first one consists of dividing the setting into cubic regions of equal size, which offers a calculation improvement of approximately 50% compared to not dividing the 3D scene into sub-regions. The second one involves the parallelization of the simulation algorithm, which provides a computational speed-up proportional to the number of processors used.

PUE attack detection in CWSNs using anomaly detection techniques

Cognitive wireless sensor network (CWSN) is a new paradigm, integrating cognitive features in traditional wireless sensor networks (WSNs) to mitigate important problems such as spectrum occupancy. Security in cognitive wireless sensor networks is an important problem since these kinds of networks manage critical applications and data. The specific constraints of WSN make the problem even more critical, and effective solutions have not yet been implemented. Primary user emulation (PUE) attack is the most studied specific attack deriving from new cognitive features. This work discusses a new approach, based on anomaly behavior detection and collaboration, to detect the primary user emulation attack in CWSN scenarios. Two non-parametric algorithms, suitable for low-resource networks like CWSNs, have been used in this work: the cumulative sum and data clustering algorithms. The comparison is based on some characteristics such as detection delay, learning time, scalability, resources, and scenario dependency. The algorithms have been tested using a cognitive simulator that provides important results in this area. Both algorithms have shown to be valid in order to detect PUE attacks, reaching a detection rate of 99% and less than 1% of false positives using collaboration.

Managing team learning in a Spanish commercial bank

Purpose – The purpose of this paper is to analyze how team management affects team-learning activities. Design/methodology/approach – The authors empirically study 68 teams as they operate in the natural business context of a major Spanish bank. Quantitative research utilizing multiple regression analyses is used to test hypotheses. Findings – The leadership behaviour (consideration, initiation of structure) displayed by the team leader plays a key role in facilitating team learning. Team leader behaviour characterised by consideration and in particular by initiation of structure are both positively related to team-learning activities. Cross-training of team members also contributes to team-learning behaviour. Research limitations/implications – A specific setting may limit the generalizability of findings. Further research may accordingly investigate to what extent these results can be generalized to other settings or other aspects of team learning. Practical implications – The leadership style adopted by the team leader, as well as cross-training of members, affect team-learning activities. These results link leadership theory to collective learning in teams and organizations, and suggest ways leaders can contribute to improved learning. Originality/value – The study provides new insight into how management of teams facilitates team-learning activities. While consideration is somewhat related to team learning, initiation of structure as well as cross-training appear as key variables.

Metodología y criterios para evaluar la influencia de la domótica y su preinstalación en los edificios en función de los condicionantes constructivos y de la envolvente interior

La introducción de la automatización de servicios en los edificios de vivienda comenzó a implementarse a finales del siglo XX. Desde entonces, los edificios que incluyen instalaciones completas de automatización suelen conocerse como edificios domotizados o edificios inteligentes e implican la introducción en la arquitectura de tecnologías que hasta la fecha eran ajenas a ésta. El diseño de estos nuevos edificios de viviendas implica cada vez más el trabajo de equipos multidisciplinares y exige por parte del arquitecto la adquisición de nuevos conocimientos y herramientas proyectuales que aseguren la viabilidad constructiva de dichos servicios de automatización doméstica. La presente tesis tiene como objetivo determinar la influencia de la automatización de servicios domésticos en la fase de proyecto constructivo de los edificios para finalmente ofrecer al arquitecto herramientas, criterios y una metodología que le ayude a proyectar estos edificios satisfactoriamente. Esta influencia se evalúa y determina en función de los condicionantes constructivos, que se definen como aquellas consideraciones que el proyectista puede tener en cuenta en la fase de diseño o de concepción de un edificio. La metodología utilizada en esta investigación incluye el análisis conceptual y de contenidos de documentos normativos, técnicos, y de investigación así como un estudio de mercado de las aplicaciones más habituales en domótica. Finalmente la investigación se centra en la envolvente interior del edificio para determinar la influencia de los servicios de domotización no convencionales en el proyecto arquitectónico. Al margen de las aportaciones teóricas de esta investigación, las cuales se han propuesto para afianzar el marco teórico de la disciplina, los resultados obtenidos constatan que dicha influencia en la fase de proyecto existe y que es posible detectar qué condicionantes constructivos se derivan de la normativa de aplicación en este tipo de proyectos, de las nuevas tecnologías implicadas en las instalaciones de automatización y de los esfuerzos de estandarización de las asociaciones de empresas en el campo de la domótica. ABSTRACT The automation of services in residential buildings (also called home automation) began to be implemented in the late twentieth century. Since then, those buildings with full automation services are often known as intelligent buildings or smart buildings, and they imply the introduction into the architecture of technologies that where foreign to the field until then. The design of these new residential buildings increasingly involves the need of multidisciplinary teams and requires the architect to acquire new knowledge and project tools in order to ensure the constructability of such home automation services. This thesis pretends to determine the impact and influence of the introduction of home automation services in the design stage of residential buildings in order to, finally, provide the architect with the tools, criteria and methodology to help him design such projects successfully. This impact is evaluated and determined by the constructive constraints or factors implied, which are defined as those considerations that the designer may take into account in the conception and design stage of the project. The methodology used in this research includes conceptual and content analysis applied to normative and technical documents, regulatory standards and research papers, as well as a market survey of the most common applications and services in home automation. Finally, the investigation focuses on the inner partitions of the building to determine the influence of unconventional domotics services in the architectural design. Besides the theoretical contributions of this research, which have been proposed to strengthen the theoretical framework of the discipline, the achieved results find that such influence in the design stage exists and that it is possible to detect which constructive constraints are derived from the application of building regulations, from the new technologies involved in home automation facilities or from the standardization efforts of the joint ventures in the field of home automation.