Sistema de guía para personas invidentes a través de bluetooth

El planteamiento inicial era proveer al individuo invidente de un sistema autónomo capaz de guiarle según sus preferencias. El resultado obtenido al finalizar este proyecto ha sido un dispositivo autónomo configurable por el usuario mediante una aplicación sw , desarrollada en la plataforma móvil Android capaz de comunicarse con el dispositivo autónomo(móvil personal). La idea de utilizar como plataforma de desarrollo sw Android, se basó fundamentalmente en que es código open source, es gratuito y está presente en el 70 por ciento de los móviles de Europa. La idea inicial era que ambos hubieran sido integrados en un mismo dispositivo, pero una vez comenzado el proyecto y habiendo evaluado los hábitos actuales, decidimos adaptar la idea general del proyecto, a nuestros días. Para ello hicimos uso del dispositivo móvil más usado hoy en día, como es nuestros teléfonos móviles, o más bien los llamado Smartphone, con los cuales podemos desde su aplicación originaria que es llamar, hasta realizar multitud de operaciones al mismo tiempo como puede ser comunicación por internet, posicionamiento via GPS, intercambio de ficheros por bluetooth… tantas como podamos programar. Sobre este último atributo, intercambio de información a través de bluetooth, es la interfaz que vamos a aprovechar para la realización de nuestro proyecto. Hoy en día el 90% de los Smartphone tiene entre sus características de conectividad la posibilidad de intercambiar información vía bluetooth. Una vez se tiene resuelto el interfaz entre el medio y el usuario se debe solucionar la forma de transformar la información para que los dispositivos móviles recojan la información y sepan discernir entre la información importante y la que no lo es. Para ello hemos desarrollado una tarjeta configurable, con un módulo bluetooth comercial para enviar la información. El resultado final de esta tarjeta proporciona una manera fácil de configurar diferentes mensajes que serán utilizados según la situación. ABSTRACT The initial approach consisted of a system that shows the way for blind people to get somewhere or something or provide to them important information, an autonomous system able to guide to their preference. After several analyses the project accomplish is a standalone device configurable by the user via an application sw, developed in Android mobile platform capable of communicating with the standalone device (personal cell phone). The decision of using the sw development platform of Android was due to the open source code concept and the great extent of presence on 70 percent of European mobiles. The first idea was that the sw and the device were integrated into a single device, but once the project had been started and having assessed the current habits, it has changed to be adapted to the present technology to get a better usability on the present-day. To achieve the project goals the most used mobile device today was used, our mobile phones, or rather called Smartphone, which you could use to phone your mother or perform many operations simultaneously such as communication online, positioning via GPS, bluetooth file trading program, etc. On this last attribute, information sharing via bluetooth, is the interface that it has been taken to complete the project. Today 90% of the Smartphone include in its connectivity features the ability to exchange information via bluetooth. Once that it was solved the interface between the environment and the final user, the next step incorporates the transformation of the information that the mobile devices collect from the environment to discern between the information the user configure to be notified or not. The hardware device that makes it possible is a configurable card with a bluetooth module that is able to send the information. The final result of this card provides an easy way to configure different messages, that we could use depending of the situation.

Latin American Agricultural Trade: The Role of the WTO in Sustainable Virtual Water Flows, European Association of Agricultural Economists

International agricultural trade has been growing significantly during the last decade. Many countries rely on imports to ensure adequate food supplies to the people. A few are becoming food baskets of the world. This process raises issues about the food security in depending countries and potentially unsustainable land and water use in exporting countries. In this paper, we analyse the impacts of amplified farm trade on natural resources, especially water. Farm exports and imports of five Latin America countries (Brazil, Argentina, Mexico, Peru and Chile) are examined carefully. A preliminary analysis indicates that virtual water imports can save valuable water resources in water-short countries, such as Mexico and Chile. Major exporting countries, including Brazil and Argentina, have become big exporters due to abundant natural resource endowments. The opportunity costs of agricultural production in those countries are identified as being low, because of the predominant green water use. It is concluded that virtual water trade can be a powerful tool to alleviate water stress in semi-arid countries. However, for exporting nations a sustainable water use can only be guaranteed if environmental production costs are fully reflected in the commodity prices. There is no basis for erecting environmental trade tariffs on exporters though. Setting up legal foundations for them in full compliance with WTOs processes would be a daunting task.

Localization and activity detection Based on the fusion of environment And inertial sensors = Localización y detección de actividad Basadas en integración de sensores y dispositivos inerciales

Los sensores inerciales (acelerómetros y giróscopos) se han ido introduciendo poco a poco en dispositivos que usamos en nuestra vida diaria gracias a su minituarización. Hoy en día todos los smartphones contienen como mínimo un acelerómetro y un magnetómetro, siendo complementados en losmás modernos por giróscopos y barómetros. Esto, unido a la proliferación de los smartphones ha hecho viable el diseño de sistemas basados en las medidas de sensores que el usuario lleva colocados en alguna parte del cuerpo (que en un futuro estarán contenidos en tejidos inteligentes) o los integrados en su móvil. El papel de estos sensores se ha convertido en fundamental para el desarrollo de aplicaciones contextuales y de inteligencia ambiental. Algunos ejemplos son el control de los ejercicios de rehabilitación o la oferta de información referente al sitio turístico que se está visitando. El trabajo de esta tesis contribuye a explorar las posibilidades que ofrecen los sensores inerciales para el apoyo a la detección de actividad y la mejora de la precisión de servicios de localización para peatones. En lo referente al reconocimiento de la actividad que desarrolla un usuario, se ha explorado el uso de los sensores integrados en los dispositivos móviles de última generación (luz y proximidad, acelerómetro, giróscopo y magnetómetro). Las actividades objetivo son conocidas como ‘atómicas’ (andar a distintas velocidades, estar de pie, correr, estar sentado), esto es, actividades que constituyen unidades de actividades más complejas como pueden ser lavar los platos o ir al trabajo. De este modo, se usan algoritmos de clasificación sencillos que puedan ser integrados en un móvil como el Naïve Bayes, Tablas y Árboles de Decisión. Además, se pretende igualmente detectar la posición en la que el usuario lleva el móvil, no sólo con el objetivo de utilizar esa información para elegir un clasificador entrenado sólo con datos recogidos en la posición correspondiente (estrategia que mejora los resultados de estimación de la actividad), sino también para la generación de un evento que puede producir la ejecución de una acción. Finalmente, el trabajo incluye un análisis de las prestaciones de la clasificación variando el tipo de parámetros y el número de sensores usados y teniendo en cuenta no sólo la precisión de la clasificación sino también la carga computacional. Por otra parte, se ha propuesto un algoritmo basado en la cuenta de pasos utilizando informaiii ción proveniente de un acelerómetro colocado en el pie del usuario. El objetivo final es detectar la actividad que el usuario está haciendo junto con la estimación aproximada de la distancia recorrida. El algoritmo de cuenta pasos se basa en la detección de máximos y mínimos usando ventanas temporales y umbrales sin requerir información específica del usuario. El ámbito de seguimiento de peatones en interiores es interesante por la falta de un estándar de localización en este tipo de entornos. Se ha diseñado un filtro extendido de Kalman centralizado y ligeramente acoplado para fusionar la información medida por un acelerómetro colocado en el pie del usuario con medidas de posición. Se han aplicado también diferentes técnicas de corrección de errores como las de velocidad cero que se basan en la detección de los instantes en los que el pie está apoyado en el suelo. Los resultados han sido obtenidos en entornos interiores usando las posiciones estimadas por un sistema de triangulación basado en la medida de la potencia recibida (RSS) y GPS en exteriores. Finalmente, se han implementado algunas aplicaciones que prueban la utilidad del trabajo desarrollado. En primer lugar se ha considerado una aplicación de monitorización de actividad que proporciona al usuario información sobre el nivel de actividad que realiza durante un período de tiempo. El objetivo final es favorecer el cambio de comportamientos sedentarios, consiguiendo hábitos saludables. Se han desarrollado dos versiones de esta aplicación. En el primer caso se ha integrado el algoritmo de cuenta pasos en una plataforma OSGi móvil adquiriendo los datos de un acelerómetro Bluetooth colocado en el pie. En el segundo caso se ha creado la misma aplicación utilizando las implementaciones de los clasificadores en un dispositivo Android. Por otro lado, se ha planteado el diseño de una aplicación para la creación automática de un diario de viaje a partir de la detección de eventos importantes. Esta aplicación toma como entrada la información procedente de la estimación de actividad y de localización además de información almacenada en bases de datos abiertas (fotos, información sobre sitios) e información sobre sensores reales y virtuales (agenda, cámara, etc.) del móvil. Abstract Inertial sensors (accelerometers and gyroscopes) have been gradually embedded in the devices that people use in their daily lives thanks to their miniaturization. Nowadays all smartphones have at least one embedded magnetometer and accelerometer, containing the most upto- date ones gyroscopes and barometers. This issue, together with the fact that the penetration of smartphones is growing steadily, has made possible the design of systems that rely on the information gathered by wearable sensors (in the future contained in smart textiles) or inertial sensors embedded in a smartphone. The role of these sensors has become key to the development of context-aware and ambient intelligent applications. Some examples are the performance of rehabilitation exercises, the provision of information related to the place that the user is visiting or the interaction with objects by gesture recognition. The work of this thesis contributes to explore to which extent this kind of sensors can be useful to support activity recognition and pedestrian tracking, which have been proven to be essential for these applications. Regarding the recognition of the activity that a user performs, the use of sensors embedded in a smartphone (proximity and light sensors, gyroscopes, magnetometers and accelerometers) has been explored. The activities that are detected belong to the group of the ones known as ‘atomic’ activities (e.g. walking at different paces, running, standing), that is, activities or movements that are part of more complex activities such as doing the dishes or commuting. Simple, wellknown classifiers that can run embedded in a smartphone have been tested, such as Naïve Bayes, Decision Tables and Trees. In addition to this, another aim is to estimate the on-body position in which the user is carrying the mobile phone. The objective is not only to choose a classifier that has been trained with the corresponding data in order to enhance the classification but also to start actions. Finally, the performance of the different classifiers is analysed, taking into consideration different features and number of sensors. The computational and memory load of the classifiers is also measured. On the other hand, an algorithm based on step counting has been proposed. The acceleration information is provided by an accelerometer placed on the foot. The aim is to detect the activity that the user is performing together with the estimation of the distance covered. The step counting strategy is based on detecting minima and its corresponding maxima. Although the counting strategy is not innovative (it includes time windows and amplitude thresholds to prevent under or overestimation) no user-specific information is required. The field of pedestrian tracking is crucial due to the lack of a localization standard for this kind of environments. A loosely-coupled centralized Extended Kalman Filter has been proposed to perform the fusion of inertial and position measurements. Zero velocity updates have been applied whenever the foot is detected to be placed on the ground. The results have been obtained in indoor environments using a triangulation algorithm based on RSS measurements and GPS outdoors. Finally, some applications have been designed to test the usefulness of the work. The first one is called the ‘Activity Monitor’ whose aim is to prevent sedentary behaviours and to modify habits to achieve desired objectives of activity level. Two different versions of the application have been implemented. The first one uses the activity estimation based on the step counting algorithm, which has been integrated in an OSGi mobile framework acquiring the data from a Bluetooth accelerometer placed on the foot of the individual. The second one uses activity classifiers embedded in an Android smartphone. On the other hand, the design of a ‘Travel Logbook’ has been planned. The input of this application is the information provided by the activity and localization modules, external databases (e.g. pictures, points of interest, weather) and mobile embedded and virtual sensors (agenda, camera, etc.). The aim is to detect important events in the journey and gather the information necessary to store it as a journal page.

Integration of Virtual Map Rooms as a support tool in historical and social research

At the present time almost all map libraries on the Internet are image collections generated by the digitization of early maps. This type of graphics files provides researchers with the possibility of accessing and visualizing historical cartographic information keeping in mind that this information has a degree of quality that depends upon elements such as the accuracy of the digitization process and proprietary constraints (e.g. visualization, resolution downloading options, copyright, use constraints). In most cases, access to these map libraries is useful only as a first approach and it is not possible to use those maps for scientific work due to the sparse tools available to measure, match, analyze and/or combine those resources with different kinds of cartography. This paper presents a method to enrich virtual map rooms and provide historians and other professional with a tool that let them to make the most of libraries in the digital era.

Virtual Excursions: a new way to explore science in class

The educational platform Virtual Science Hub (ViSH) has been developed as part of the GLOBAL excursion European project. ViSH (http://vishub.org/) is a portal where teachers and scientist interact to create virtual excursions to science infrastructures. The main motivation behind the project was to connect teachers - and in consequence their students - to scientific institutions and their wide amount of infrastructures and resources they are working with. Thus the idea of a hub was born that would allow the two worlds of scientists and teachers to connect and to innovate science teaching. The core of the ViSH?s concept design is based on virtual excursions, which allow for a number of pedagogical models to be applied. According to our internal definition a virtual excursion is a tour through some digital context by teachers and pupils on a given topic that is attractive and has an educational purpose. Inquiry-based learning, project-based and problem-based learning are the most prominent approaches that a virtual excursion may serve. The domain specific resources and scientific infrastructures currently available on the ViSH are focusing on life sciences, nano-technology, biotechnology, grid and volunteer computing. The virtual excursion approach allows an easy combination of these resources into interdisciplinary teaching scenarios. In addition, social networking features support the users in collaborating and communicating in relation to these excursions and thus create a community of interest for innovative science teaching. The design and development phases were performed following a participatory design approach. An important aspect in this process was to create design partnerships amongst all actors involved, researchers, developers, infrastructure providers, teachers, social scientists, and pedagogical experts early in the project. A joint sense of ownership was created and important changes during the conceptual phase were implemented in the ViSH due to early user feedback. Technology-wise the ViSH is based on the latest web technologies in order to make it cross-platform compatible so that it works on several operative systems such as Windows, Mac or Linux and multi-device accessible, such as desktop, tablet and mobile devices. The platform has been developed in HTML5, the latest standard for web development, assuring that it can run on any modern browser. In addition to social networking features a core element on the ViSH is the virtual excursions editor. It is a web tool that allows teachers and scientists to create rich mash-ups of learning resources provided by the e-Infrastructures (i.e. remote laboratories and live webcams). These rich mash-ups can be presented in either slides or flashcards format. Taking advantage of the web architecture supported, additional powerful components have been integrated like a recommendation engine to provide personalized suggestions about educational content or interesting users and a videoconference tool to enhance real-time collaboration like MashMeTV (http://www.mashme.tv/).

Implementation techniques for evolvable HW systems: virtual vs. dynamic reconfiguration

Adaptive hardware requires some reconfiguration capabilities. FPGAs with native dynamic partial reconfiguration (DPR) support pose a dilemma for system designers: whether to use native DPR or to build a virtual reconfigurable circuit (VRC) on top of the FPGA which allows selecting alternative functions by a multiplexing scheme. This solution allows much faster reconfiguration, but with higher resource overhead. This paper discusses the advantages of both implementations for a 2D image processing matrix. Results show how higher operating frequency is obtained for the matrix using DPR. However, this is compensated in the VRC during evolution due to the comparatively negligible reconfiguration time. Regarding area, the DPR implementation consumes slightly more resources due to the reconfiguration engine, but adds further more capabilities to the system.

Sintetizador analógico en Arduino

Este proyecto consiste en el diseño y construcción de un sintetizador basado en el chip 6581 Sound Interface Device (SID). Este chip era el encargado de la generación de sonido en el Commodore 64, ordenador personal comercializado en 1982, y fue el primer sintetizador complejo construido para ordenador. El chip en cuestión es un sintetizador de tres voces, cada una de ellas capaz de generar cuatro diferentes formas de onda. Cada voz tiene control independiente de varios parámetros, permitiendo una relativamente amplia variedad de sonidos y efectos, muy útil para su uso en videojuegos. Además está dotado de un filtro programable para conseguir distintos timbres mediante síntesis sustractiva. El sintetizador se ha construido sobre Arduino, una plataforma de electrónica abierta concebida para la creación de prototipos, consistente en una placa de circuito impreso con un microcontrolador, programable desde un PC para que realice múltiples funciones (desde encender LEDs hasta controlar servomecanismos en robótica, procesado y transmisión de datos, etc.). El sintetizador es controlable vía MIDI, por ejemplo, desde un teclado de piano. A través de MIDI recibe información tal como qué notas debe tocar, o los valores de los parámetros del SID que modifican las propiedades del sonido. Además, toda esa información también la puede recibir de un PC mediante una conexión USB. Se han construido dos versiones del sintetizador: una versión “hardware”, que utiliza el SID para la generación de sonido, y otra “software”, que reemplaza el SID por un emulador, es decir, un programa que se comporta (en la medida de lo posible) de la misma manera que el SID. El emulador se ha implementado en un microcontrolador Atmega 168 de Atmel, el mismo que utiliza Arduino. ABSTRACT. This project consists on design and construction of a synthesizer which is based on chip 6581 Sound Interface Device (SID). This chip was used for sound generation on the Commodore 64, a home computer presented in 1982, and it was the first complex synthesizer built for computers. The chip is a three-voice synthesizer, each voice capable of generating four different waveforms. Each voice has independent control of several parameters, allowing a relatively wide variety of sounds and effects, very useful for its use on videogames. It also includes a programmable filter, allowing more timbre control via subtractive synthesis. The synthesizer has been built on Arduino, an open-source electronics prototyping platform that consists on a printed circuit board with a microcontroller, which is programmable with a computer to do several functions (lighting LEDs, controlling servomechanisms on robotics, data processing or transmission, etc.). The synthesizer is controlled via MIDI, in example, from a piano-type keyboard. It receives from MIDI information such as the notes that should be played or SID’s parameter values that modify the sound. It also can receive that information from a PC via USB connection. Two versions of the synthesizer have been built: a hardware one that uses the SID chip for sound generation, and a software one that replaces SID by an emulator, it is, a program that behaves (as far as possible) in the same way the SID would. The emulator is implemented on an Atmel’s Atmega 168 microcontroller, the same one that is used on Arduino.

RECLAMO: virtual and collaborative honeynets based on trust management and autonomous systems applied to intrusion management

Security intrusions in large systems is a problem due to its lack of scalability with the current IDS-based approaches. This paper describes the RECLAMO project, where an architecture for an Automated Intrusion Response System (AIRS) is being proposed. This system will infer the most appropriate response for a given attack, taking into account the attack type, context information, and the trust and reputation of the reporting IDSs. RECLAMO is proposing a novel approach: diverting the attack to a specific honeynet that has been dynamically built based on the attack information. Among all components forming the RECLAMO's architecture, this paper is mainly focused on defining a trust and reputation management model, essential to recognize if IDSs are exposing an honest behavior in order to accept their alerts as true. Experimental results confirm that our model helps to encourage or discourage the launch of the automatic reaction process.

Development and implementation of a virtual laboratory for training process improvement in the mechanics of continuous media

The project arises from the need to develop improved teaching methodologies in field of the mechanics of continuous media. The objective is to offer the student a learning process to acquire the necessary theoretical knowledge, cognitive skills and the responsibility and autonomy to professional development in this area. Traditionally the teaching of the concepts of these subjects was performed through lectures and laboratory practice. During these lessons the students attitude was usually passive, and therefore their effectiveness was poor. The proposed methodology has already been successfully employed in universities like University Bochum, Germany, University the South Australia and aims to improve the effectiveness of knowledge acquisition through use by the student of a virtual laboratory. This laboratory allows to adapt the curricula and learning techniques to the European Higher Education and improve current learning processes in the University School of Public Works Engineers -EUITOP- of the Technical University of Madrid -UPM-, due there are not laboratories in this specialization. The virtual space is created using a software platform built on OpenSim, manages 3D virtual worlds, and, language LSL -Linden Scripting Language-, which imprints specific powers to objects. The student or user can access this virtual world through their avatar -your character in the virtual world- and can perform practices within the space created for the purpose, at any time, just with computer with internet access and viewfinder. The virtual laboratory has three partitions. The virtual meeting rooms, where the avatar can interact with peers, solve problems and exchange existing documentation in the virtual library. The interactive game room, where the avatar is has to resolve a number of issues in time. And the video room where students can watch instructional videos and receive group lessons. Each audiovisual interactive element is accompanied by explanations framing it within the area of knowledge and enables students to begin to acquire a vocabulary and practice of the profession for which they are being formed. Plane elasticity concepts are introduced from the tension and compression testing of test pieces of steel and concrete. The behavior of reticulated and articulated structures is reinforced by some interactive games and concepts of tension, compression, local and global buckling will by tests to break articulated structures. Pure bending concepts, simple and composite torsion will be studied by observing a flexible specimen. Earthquake resistant design of buildings will be checked by a laboratory test video.

Diseño de un sistema para el manejo a distancia de aeronaves construidas con arduino

El principal objetivo del proyecto es intentar reducir los costes de algunas de las operaciones de vigilancia llevadas a cabo por agencias o instituciones de seguridad. El proyecto consiste en diseñar y desarrollar un sistema informático que permita el manejo a distancia de un cuadricóptero a través de un ordenador, utilizando el teclado y visualizando las imágenes recibidas del módulo de la videocámara. Cada cuadricóptero estará compuesto de diferentes módulos y cada módulo tiene una funcionalidad característica. Se desarrollará un sistema de gestión de aeronaves para poder añadir nuevas unidades de cuadricópteros, así como un sistema de gestión de usuarios para administrar los usuarios en el sistema. Adicionalmente, se construirá un prototipo de cuadricóptero y se implementará su unidad controladora para poder realizar las pruebas del sistema desarrollado con ello. ---ABSTRACT---The aim of this project is to attempt to reduce the costs of some surveillance services offered by security agencies or institutions. The project consists in designing and developing a computer system to remotely control a drone or quad-copter through a computer, manipulating the drone through the keyboard and watching the images captured from the camera module. Each drone is built with one or more modules, and each module has its own functionality. Both new drones and new users can be added to the computer system through the drone management system and the user management system, respectively. Both of management systems are going to be developed. The project also includes the making of a quad-copter prototype and a controller unit implementation.

Lecciones prácticas de desarrollo de aplicaciones móviles en Android

Los avances que se han producido en los últimos años en cuanto a potencia y capacidades de los teléfonos móviles que usamos de manera cotidiana, traen de la mano un auge en la demanda de aplicaciones de todo ámbito: desde aplicaciones generales de consumo, pasando por juegos, hasta aplicaciones que ofrecen soluciones internas a empresas. Existen diferentes sistemas operativos para teléfonos móviles como se explicará más adelante en el capítulo introductorio. En dicho capítulo se da la justificación de por qué en el presente Proyecto Fin de Carrera se centra en el estudio del sistema operativo Android. Primeramente se dará una visión global del estado del arte en cuanto al mundo de aplicaciones móviles se refiere. Se explicarán los pros y contras de cada sistema operativo, detallando el lenguaje de programación utilizado en cada uno de ellos y sus principales características. Después, en el capítulo tres se estudiará con más profundidad el sistema operativo Android, desde su historia y orígenes, hasta los componentes básicos para la creación de una aplicación, pasando por la arquitectura interna del sistema o su máquina virtual. Con esto se pretende que el lector tenga un contexto que le permita comprender los siguientes capítulos, que es donde está el núcleo de este Proyecto Fin de Carrera. El cuarto capítulo trata de una serie de prácticas incrementales, que cubren una gran parte de las posibilidades que ofrece el sistema operativo Android para el desarrollo de aplicaciones. Se ha pretendido que la dificultad vaya de menos a más y que las prácticas se vayan apoyando en las anteriores, para tener al final una única solución que englobe todas las lecciones. El último capítulo quiere englobar el uso de todas las lecciones aprendidas en las lecciones anteriores para crear una aplicación que bien podría ser una aplicación real para un cliente. Se trata de una aplicación que muestra en tiempo real información sobre las cámaras de tráfico de la ciudad de Madrid. ABSTRACT. The improvements that have occurred in recent years in terms of power and capabilities of mobile phones that we use on a daily basis, bring an increment in demand for all kind of applications, from general consumer applications, games or even internal applications that offer solutions to companies. There are different operating systems for mobile phones as will be explained later in the introductory chapter. In that chapter the answer for why this Thesis focuses on the study of the Android operating system is given as well. First an overview of the state of the art about the world of mobile applications will be referred. The pros and cons of each operating system will be explained, detailing the programming language used in each of them and their main characteristics. Then in chapter three will be discussed in more depth the Android operating system, from its history and beginnings to the main components for the creation of an application, to the internal architecture of the system or virtual machine. The goal of chapter three is to give the readers a context that allows them to understand the following chapters, where the core of this Thesis is. The fourth chapter contains a series of incremental practices covering a large part of the potential of the Android operating system for application development. Those practices grow in difficulty and are supported by the previous in order to have at the end a single solution that fits all lessons. The last chapter wants to embrace the use of all the lessons learned in previous lessons to create an application that could well be an actual application for a client. It is an application that displays real-time information off traffic cameras of the city of Madrid.

Control de módulo 3G mediante aplicación Android

Este proyecto describe la metodología a seguir para conectar la plataforma Arduino a dispositivos Android y establecer una conexión que permita controlar dicha plataforma. Sobre Arduino se acoplará un módulo 3G que permitirá hacer uso de funcionalidades propias de los teléfonos móviles. El objetivo final del proyecto era el control del módulo 3G mediante comandos AT enviados desde un dispositivo Android (tableta) conectado a través de USB. Para ello, se ha desarrollado una aplicación de demostración que permite el uso de algunas de las funcionalidades de comunicación del módulo 3G. Para alcanzar el objetivo propuesto se ha investigado sobre temas tales como: internet de las cosas, las tecnologías de comunicaciones móviles, el sistema operativo Android y el desarrollo de aplicaciones móviles, la plataforma Arduino, el funcionamiento del módulo 3G y sobre la comunicación serie que permitirá comunicarse entre Android y módulo 3G. El proyecto proporciona una guía de iniciación con explicaciones de los diferentes dispositivos, tecnologías y pasos a seguir para la integración de las diferentes plataformas que se han usado en el proyecto: Arduino, Módulo de comunicaciones 3G, y Android. ABSTRACT. This project describes the methodology to connect the Arduino platform to Android devices and establish a connection to allow the platform control. A 3G module will be engaged on Arduino allowing the usage of mobile phones functionalities. The main objective of the project was the control of 3G module through AT commands sent from an Android device (tablet) connected via USB. For that, a demonstration application was developed to permit the use of some communication features of 3G module. To achieve the target, an investigation has been carried out about issues such as: internet of things, mobile communications technologies, the Android operating system and mobile applications development, the Arduino platform, the 3G module operation and serial communication that allows the communication between Android and the 3G module. The project provides a starter guide with explanations of the different devices, technologies and steps for the integration of the different platforms that have been used in the project: Arduino, 3G communications module and Android.

Desarrollo del teclado virtual “Mokey” basado en gestos para personas con movilidad reducida: capa de sistema

La Realidad Aumentada forma parte de múltiples proyectos de investigación desde hace varios años. La unión de la información del mundo real y la información digital ofrece un sinfín de posibilidades. Las más conocidas van orientadas a los juegos pero, gracias a ello, también se pueden implementar Interfaces Naturales. En otras palabras, conseguir que el usuario maneje un dispositivo electrónico con sus propias acciones: movimiento corporal, expresiones faciales, etc. El presente proyecto muestra el desarrollo de la capa de sistema de una Interfaz Natural, Mokey, que permite la simulación de un teclado mediante movimientos corporales del usuario. Con esto, se consigue que cualquier aplicación de un ordenador que requiera el uso de un teclado, pueda ser usada con movimientos corporales, aunque en el momento de su creación no fuese diseñada para ello. La capa de usuario de Mokey es tratada en el proyecto realizado por Carlos Lázaro Basanta. El principal objetivo de Mokey es facilitar el acceso de una tecnología tan presente en la vida de las personas como es el ordenador a los sectores de la población que tienen alguna discapacidad motora o movilidad reducida. Ya que vivimos en una sociedad tan informatizada, es esencial que, si se quiere hablar de inclusión social, se permita el acceso de la actual tecnología a esta parte de la población y no crear nuevas herramientas exclusivas para ellos, que generarían una situación de discriminación, aunque esta no sea intencionada. Debido a esto, es esencial que el diseño de Mokey sea simple e intuitivo, y al mismo tiempo que esté dotado de la suficiente versatilidad, para que el mayor número de personas discapacitadas puedan encontrar una configuración óptima para ellos. En el presente documento, tras exponer las motivaciones de este proyecto, se va a hacer un análisis detallado del estado del arte, tanto de la tecnología directamente implicada, como de otros proyectos similares. Se va prestar especial atención a la cámara Microsoft Kinect, ya que es el hardware que permite a Mokey detectar la captación de movimiento. Tras esto, se va a proceder a una explicación detallada de la Interfaz Natural desarrollada. Se va a prestar especial atención a todos aquellos algoritmos que han sido implementados para la detección del movimiento, así como para la simulación del teclado. Finalmente, se va realizar un análisis exhaustivo del funcionamiento de Mokey con otras aplicaciones. Se va a someter a una batería de pruebas muy amplia que permita determinar su rendimiento en las situaciones más comunes. Del mismo modo, se someterá a otra batería de pruebas destinada a definir su compatibilidad con los diferentes tipos de programas existentes en el mercado. Para una mayor precisión a la hora de analizar los datos, se va a proceder a comparar Mokey con otra herramienta similar, FAAST, pudiendo observar de esta forma las ventajas que tiene una aplicación especialmente pensada para gente discapacitada sobre otra que no tenía este fin. ABSTRACT. During the last few years, Augmented Reality has been an important part of several research projects, as the combination of the real world and the digital information offers a whole new set of possibilities. Among them, one of the most well-known possibilities are related to games by implementing Natural Interfaces, which main objective is to enable the user to handle an electronic device with their own actions, such as corporal movements, facial expressions… The present project shows the development of Mokey, a Natural Interface that simulates a keyboard by user’s corporal movements. Hence, any application that requires the use of a keyboard can be handled with this Natural Interface, even if the application was not designed in that way at the beginning. The main objective of Mokey is to simplify the use of the computer for those people that are handicapped or have some kind of reduced mobility. As our society has been almost completely digitalized, this kind of interfaces are essential to avoid social exclusion and discrimination, even when it is not intentional. Thus, some of the most important requirements of Mokey are its simplicity to use, as well as its versatility. In that way, the number of people that can find an optimal configuration for their particular condition will grow exponentially. After stating the motivations of this project, the present document will provide a detailed state of the art of both the technologies applied and other similar projects, highlighting the Microsoft Kinect camera, as this hardware allows Mokey to detect movements. After that, the document will describe the Natural Interface that has been developed, paying special attention to the algorithms that have been implemented to detect movements and synchronize the keyboard. Finally, the document will provide an exhaustive analysis of Mokey’s functioning with other applications by checking its behavior with a wide set of tests, so as to determine its performance in the most common situations. Likewise, the interface will be checked against another set of tests that will define its compatibility with different softwares that already exist on the market. In order to have better accuracy while analyzing the data, Mokey’s interface will be compared with a similar tool, FAAST, so as to highlight the advantages of designing an application that is specially thought for disabled people.