Communication: Transition State Theory for dissipative systems without a dividing surface

Transition state theory is a central cornerstone in reaction dynamics. Its key step is the identification of a dividing surface that is crossed only once by all reactive trajectories. This assumption is often badly violated, especially when the reactive system is coupled to an environment. The calculations made in this way then overestimate the reaction rate and the results depend critically on the choice of the dividing surface. In this Communication, we study the phase space of a stochastically driven system close to an energetic barrier in order to identify the geometric structure unambiguously determining the reactive trajectories, which is then incorporated in a simple rate formula for reactions in condensed phase that is both independent of the dividing surface and exact.

Cooperative Task Execution between Modular Robots Based on Tight-Loose Cooperation Strategies

The complexity in the execution of cooperative tasks is high due to the fact that a robot team requires movement coordination at the beginning of the mission and continuous coordination during the execution of the task. A variety of techniques have been proposed to give a solution to this problem assuming standard mobile robots. This work focuses on presenting the execution of a cooperative task by a modular robot team. The complexity of the task execution increases due to the fact that each robot is composed of modules which have to be coordinated in a proper way to successfully work. A combined tight and loose cooperation strategy is presented and a bar-pushing example is used as a cooperative task to show the performance of this type of system.

DAEDALUS at ImageCLEF 2011 Plant Identification Task: Using SIFT Keypoints for Object Detection

This paper describes the participation of DAEDALUS at ImageCLEF 2011 Plant Identification task. The task is evaluated as a supervised classification problem over 71 tree species from the French Mediterranean area used as class labels, based on visual content from scan, scan-like and natural photo images. Our approach to this task is to build a classifier based on the detection of keypoints from the images extracted using Lowe’s Scale Invariant Feature Transform (SIFT) algorithm. Although our overall classification score is very low as compared to other participant groups, the main conclusion that can be drawn is that SIFT keypoints seem to work significantly better for photos than for the other image types, so our approach may be a feasible strategy for the classification of this kind of visual content.

UPM system for the translation task

This paper describes the UPM system for translation task at the EMNLP 2011 workshop on statistical machine translation (http://www.statmt.org/wmt11/), and it has been used for both directions: Spanish-English and English-Spanish. This system is based on Moses with two new modules for pre and post processing the sentences. The main contribution is the method proposed (based on the similarity with the source language test set) for selecting the sentences for training the models and adjusting the weights. With system, we have obtained a 23.2 BLEU for Spanish-English and 21.7 BLEU for EnglishSpanish

Task granularity analysis in logic programs

While logic programming languages offer a great deal of scope for parallelism, there is usually some overhead associated with the execution of goals in parallel because of the work involved in task creation and scheduling. In practice, therefore, the "granularity" of a goal, i.e. an estimate of the work available under it, should be taken into account when deciding whether or not to execute a goal concurrently as a sepárate task. This paper describes a method for estimating the granularity of a goal at compile time. The runtime overhead associated with our approach is usually quite small, and the performance improvements resulting from the incorporation of grainsize control can be quite good. This is shown by means of experimental results.

Dysfunctional and compensatory duality in mild cognitive impairment during a continuous recognition memory task

One of the current issues of debate in the study of mild cognitive impairment (MCI) is deviations of oscillatory brain responses from normal brain states and its dynamics. This work aims to characterize the differences of power in brain oscillations during the execution of a recognition memory task in MCI subjects in comparison with elderly controls. Magnetoencephalographic (MEG) signals were recorded during a continuous recognition memory task performance. Oscillatory brain activity during the recognition phase of the task was analyzed by wavelet transform in the source space by means of minimum norm algorithm. Both groups obtained a 77% hit ratio. In comparison with healthy controls, MCI subjects showed increased theta (p < 0.001), lower beta reduction (p < 0.001) and decreased alpha and gamma power (p < 0.002 and p < 0.001 respectively) in frontal, temporal and parietal areas during early and late latencies. Our results point towards a dual pattern of activity (increase and decrease) which is indicative of MCI and specific to certain time windows, frequency bands and brain regions. These results could represent two neurophysiological sides of MCI. Characterizing these opposing processes may contribute to the understanding of the disorder.

Handmade Task Tracking Applied to Cognitive Rehabilitation

This article presents research focused on tracking manual tasks that are applied in cognitive rehabilitation so as to analyze the movements of patients who suffer from Apraxia and Action Disorganization Syndrome (AADS). This kind of patients find executing Activities of Daily Living (ADL) too difficult due to the loss of memory and capacity to carry out sequential tasks or the impossibility of associating different objects with their functions. This contribution is developed from the work of Universidad Politécnica de Madrid and Technical University of Munich in collaboration with The University of Birmingham. The KinectTM for Windows© device is used for this purpose. The data collected is compared to an ultrasonic motion capture system. The results indicate a moderate to strong correlation between signals. They also verify that KinectTM is very suitable and inexpensive. Moreover, it turns out to be a motion-capture system quite easy to implement for kinematics analysis in ADL.

Accelerating FPGA-based evolution of wavelet transform filters by optimized task scheduling

Adaptive embedded systems are required in various applications. This work addresses these needs in the area of adaptive image compression in FPGA devices. A simplified version of an evolution strategy is utilized to optimize wavelet filters of a Discrete Wavelet Transform algorithm. We propose an adaptive image compression system in FPGA where optimized memory architecture, parallel processing and optimized task scheduling allow reducing the time of evolution. The proposed solution has been extensively evaluated in terms of the quality of compression as well as the processing time. The proposed architecture reduces the time of evolution by 44% compared to our previous reports while maintaining the quality of compression unchanged with respect to existing implementations. The system is able to find an optimized set of wavelet filters in less than 2 min whenever the input type of data changes.

Distributed bees algorithm for task allocation in swarm of robots

In this paper, we propose the distributed bees algorithm (DBA) for task allocation in a swarm of robots. In the proposed scenario, task allocation consists in assigning the robots to the found targets in a 2-D arena. The expected distribution is obtained from the targets' qualities that are represented as scalar values. Decision-making mechanism is distributed and robots autonomously choose their assignments taking into account targets' qualities and distances. We tested the scalability of the proposed DBA algorithm in terms of number of robots and number of targets. For that, the experiments were performed in the simulator for various sets of parameters, including number of robots, number of targets, and targets' utilities. Control parameters inherent to DBA were tuned to test how they affect the final robot distribution. The simulation results show that by increasing the robot swarm size, the distribution error decreased.

UPM Activities on the STLs processing (Task 6.2) and the generation of DPA cross section library up to 150 MeV (Task 4.1)

Generation of a complete damage energy and dpa cross section library up to 150 MeVbased on JEFF- 3.1.1 and suitable approximations (UPM) Postprocessing of photonuclear libraries (by CCFE) and thermal scattering  tables (by UPM) at the backend of the calculational system (CCFE/UPM)

Response threshold models and stochastic learning automata for self-coordination of heterogeneous multi-task distribution in multi-robot systems.

This paper focuses on the general problem of coordinating multiple robots. More specifically, it addresses the self-selection of heterogeneous specialized tasks by autonomous robots. In this paper we focus on a specifically distributed or decentralized approach as we are particularly interested in a decentralized solution where the robots themselves autonomously and in an individual manner, are responsible for selecting a particular task so that all the existing tasks are optimally distributed and executed. In this regard, we have established an experimental scenario to solve the corresponding multi-task distribution problem and we propose a solution using two different approaches by applying Response Threshold Models as well as Learning Automata-based probabilistic algorithms. We have evaluated the robustness of the algorithms, perturbing the number of pending loads to simulate the robot’s error in estimating the real number of pending tasks and also the dynamic generation of loads through time. The paper ends with a critical discussion of experimental results.

Temporal task allocation in periodic environments. An approach based on synchronization

In this paper, we study a robot swarm that has to perform task allocation in an environment that features periodic properties. In this environment, tasks appear in different areas following periodic temporal patterns. The swarm has to reallocate its workforce periodically, performing a temporal task allocation that must be synchronized with the environment to be effective. We tackle temporal task allocation using methods and concepts that we borrow from the signal processing literature. In particular, we propose a distributed temporal task allocation algorithm that synchronizes robots of the swarm with the environment and with each other. In this algorithm, robots use only local information and a simple visual communication protocol based on light blinking. Our results show that a robot swarm that uses the proposed temporal task allocation algorithm performs considerably more tasks than a swarm that uses a greedy algorithm.

Gestión de ideas innovadoras

El trabajo de fin de grado que se va a definir detalladamente en esta memoria, trata de poner de manifiesto muchos de los conocimientos que he adquirido a lo largo de la carrera, aplicándolos en un proyecto real. Se ha desarrollado una plataforma capaz de albergar ideas, escritas por personas de todo el mundo que buscan compartirlas con los demás, para que estas sean comentadas, valoradas y entre todos poder mejorarlas. Estas ideas pueden ser de cualquier ámbito, por tanto, se da la posibilidad de clasificarlas en las categorías que mejor encajen con la idea. La aplicación ofrece una API RESTful muy descriptiva, en la que se ha identificado y estructurado cada recurso, para que a través de los “verbos http” se puedan gestionar todos los elementos de una forma fácil y sencilla, independientemente del cliente que la utilice. La arquitectura está montada siguiendo el patrón de diseño modelo vista-controlador, utilizando las últimas tecnologías del mercado como Spring, Liferay, SmartGWT y MongoDB (entre muchas otras) con el objetivo de crear una aplicación segura, escalable y modulada, por lo que se ha tenido que integrar todos estos frameworks. Los datos de la aplicación se hacen persistentes en dos tipos de bases de datos, una relacional (MySQL) y otra no relacional (MongoDB), aprovechando al máximo las características que ofrecen cada una de ellas. El cliente propuesto es accesible mediante un navegador web, se basa en el portal de Liferay. Se han desarrollado varios “Portlets o Widgets”, que componen la estructura de contenido que ve el usuario final. A través de ellos se puede acceder al contenido de la aplicación, ideas, comentarios y demás contenidos sociales, de una forma agradable para el usuario, ya que estos “Portlets” se comunican entre sí y hacen peticiones asíncronas a la API RESTful sin necesidad de recargar toda la estructura de la página. Además, los usuarios pueden registrarse en el sistema para aportar más contenidos u obtener roles que les dan permisos para realizar acciones de administración. Se ha seguido una metodología “Scrum” para la realización del proyecto, con el objetivo de dividir el proyecto en tareas pequeñas y desarrollarlas de una forma ágil. Herramientas como “Jenkins” me han ayudado a una integración continua y asegurando mediante la ejecución de los test de prueba, que todos los componentes funcionan. La calidad ha sido un aspecto principal en el proyecto, se han seguido metodologías software y patrones de diseño para garantizar un diseño de calidad, reutilizable, óptimo y modulado. El uso de la herramienta “Sonar” ha ayudado a este cometido. Además, se ha implementado un sistema de pruebas muy completo de todos los componentes de la aplicación. En definitiva, se ha diseñado una aplicación innovadora de código abierto, que establece unas bases muy definidas para que si algún día se pone en producción, sirva a las personas para compartir pensamientos o ideas ayudando a mejorar el mundo en el que vivimos. ---ABSTRACT---The Final Degree Project, described in detail in this report, attempts to cover a lot of the knowledge I have acquired during my studies, applying it to a real project. The objective of the project has been to develop a platform capable of hosting ideas from people all over the world, where users can share their ideas, comment on and rate the ideas of others and together help improving them. Since these ideas can be of any kind, it is possible to classify them into suitable categories. The application offers a very descriptive API RESTful, where each resource has been identified and organized in a way that makes it possible to easily manage all the elements using the HTTP verbs, regardless of the client using it. The architecture has been built following the design pattern model-view-controller, using the latest market technologies such as Spring, Liferay, Smart GWT and MongoDB (among others) with the purpose of creating a safe, scalable and adjustable application. The data of the application are persistent in two different kinds of databases, one relational (MySQL) and the other non-relational (MongoDB), taking advantage of all the different features each one of them provides. The suggested client is accessible through a web browser and it is based in Liferay. Various “Portlets" or "Widgets” make up the final content of the page. Thanks to these Portlets, the user can access the application content (ideas, comments and categories) in a pleasant way as the Portlets communicate with each other making asynchronous requests to the API RESTful without the necessity to refresh the whole page. Furthermore, users can log on to the system to contribute with more contents or to obtain administrator privileges. The Project has been developed following a “Scrum” methodology, with the main objective being that of dividing the Project into smaller tasks making it possible to develop each task in a more agile and ultimately faster way. Tools like “Jenkins” have been used to guarantee a continuous integration and to ensure that all the components work correctly thanks to the execution of test runs. Quality has been one of the main aspects in this project, why design patterns and software methodologies have been used to guarantee a high quality, reusable, modular and optimized design. The “Sonar” technology has helped in the achievement of this goal. Furthermore, a comprehensive proofing system of all the application's components has been implemented. In conclusion, this Project has consisted in developing an innovative, free source application that establishes a clearly defined basis so that, if it someday will be put in production, it will allow people to share thoughts and ideas, and by doing so, help them to improve the World we live in.

Task-based telemanipulation for maintenance in large scientific facilities

This thesis presents a task-oriented approach to telemanipulation for maintenance in large scientific facilities, with specific focus on the particle accelerator facilities at European Organization for Nuclear Research (CERN) in Geneva, Switzerland and GSI Helmholtz Centre for Heavy Ion Research (GSI) in Darmstadt, Germany. It examines how telemanipulation can be used in these facilities and reviews how this differs from the representation of telemanipulation tasks within the literature. It provides methods to assess and compare telemanipulation procedures as well a test suite to compare telemanipulators themselves from a dexterity perspective. It presents a formalisation of telemanipulation procedures into a hierarchical model which can be then used as a basis to aid maintenance engineers in assessing tasks for telemanipulation, and as the basis for future research. The model introduces a new concept of Elemental Actions as the building block of telemanipulation movements and incorporates the dependent factors for procedures at a higher level of abstraction. In order to gain insight into realistic tasks performed by telemanipulation systems within both industrial and research environments a survey of teleoperation experts is presented. Analysis of the responses is performed from which it is concluded that there is a need within the robotics community for physical benchmarking tests which are geared towards evaluating the dexterity of telemanipulators for comparison of their dexterous abilities. A three stage test suite is presented which is designed to allow maintenance engineers to assess different telemanipulators for their dexterity. This incorporates general characteristics of the system, a method to compare kinematic reachability of multiple telemanipulators and physical test setups to assess dexterity from a both a qualitative perspective and measurably by using performance metrics. Finally, experimental results are provided for the application of the proposed test suite onto two telemanipulation systems, one from a research setting and the other within CERN. It describes the procedure performed and discusses comparisons between the two systems, as well as providing input from the expert operator of the CERN system.

Thermal Scattering Libraries Processing (F4E, Task 6.2)

Presentación del trabajo realizado en el marco del proyecto F4E, sobre el procesamiento de librerías de dispersión térmica de neutrones en formato ACE para su uso con el código MCNP. Se presentan tanto los métodos y procedimientos empleados, como los resultados y diferencias entre las distintas fuentes de datos.