Effect of the Wake of the Transducer Supports on the Ultrasonic Anemometer Measurements

The wake produced by the structural supports of the ultrasonic anemometers (UAs)causes distortions in the velocity field in the vicinity of the sonic path. These distortions are measured by the UA, inducing errors in the determination of the mean velocity, turbulence intensity, spectrum, etc.; basic parameters to determine the effect of wind on structures. Additionally, these distortions can lead to indefinition in the calibration function of the sensors (Cuerva et al., 2004). Several wind tunnel tests have been dedicated to obtaining experimental data, from which have been developed fit models to describe and to correct these distortions (Kaimal, 1978 and Wyngaard, 1985). This work explores the effect of a vortex wake generated by the supports of an UA, on the measurement of wind speed done by this instrument. To do this, the Von Karman¿s vortex street potential model is combined with the mathematical model of the measuring process carried out by UAs developed by Franchini et al. (2007). The obtained results are the correction functions of the measured wind velocity, which depends on the geometry of the sonic anemometer and aerodynamic conditions. These results have been validated with the ones obtained in a wind tunnel test done on a single path UA, especially developed for research. The supports of this UA have been modified in order to reproduce the conditions of the theoretical model. Good agreements between experimental and theoretical results have been found.

Integrated phased array transducer for on-board structural health monitoring

Permanently bonded onto a structure, an integrated Phased Array (PhA II) transducer that can provide reliable electromechanical connection with corresponding sophisticated miniaturized ?all in one? SHM electronic device installed directly above it, without need for any interface cabling, during all aerospace structure lifecycle phases and for a huge variety of real harsh service environments of structures to be monitored is presented. This integrated PhA II transducer [1], as a key component of the PAMELA SHM? (Phased Array Monitoring for Enhanced Life Assessment) system, has two principal tasks at the same time, reliably transceive elastic waves in real aerospace service environments and serves as a reliable sole carrier or support for associated integrated on-board SHM electronic device attached above. The PhA II transducer successfully accomplished both required task throughout extensive test campaigns which included low to high temperature tests, temperature cycling, mechanical loading, combined thermo- mechanical loading and vibration resistance, etc. both with and without SHM device attached above due to RTCA DO-160F.

Simulation, construction and characterization of a piezoelectric transducer using rexolite as acoustic matching

This article describes the simulation and characterization of an ultrasonic transducer using a new material called Rexolite to be used as a matching element. This transducer was simulated using a commercial piezoelectric ceramic PIC255 at 8 MHz. Rexolite, the new material, presents an excellent acoustic matching, specially in terms of the acoustic impedance of water. Finite elements simulations were used in this work. Rexolite was considered as a suitable material in the construction of the transducer due to its malleability and acoustic properties, to validate the simulations a prototype transducer was constructed. Experimental measurements were used to determine the resonance frequency of the prototype transducer. Simulated and experimental results were very similar showing that Rexolite may be an excellent matching, particularly for medical applications.

Compact duplexing for a 680-GHz radar using a waveguide orthomode transducer

A compact 680-GHz waveguide orthomode transducer (OMT) and circular horn combination has been designed, tested, and characterized in a radar transceiver's duplexer. The duplexing capability is implemented by a hybrid waveguide quasi optical solution, combining a linear polarization OMT and an external grating polarizer. Isolation between the OMT's orthogonal ports' flanges was measured with a vector network analyzer to exceed 33 dB over a >10% bandwidth between 630 and 710 GHz. Calibrated Y-factor measurements using a mixer attached to the OMT ports reveal losses through the transmit and receive paths that sum to an average of 4.7 dB of two-way loss over 660-690 GHz. This is consistent with radar sensitivity measurements comparing the new OMT/horn with a quasi-optical wire grid beam splitter. Moreover, the radar performance assessment validates the OMT as a suitable compact substitute of the wire grid for the JPL's short-range 680-GHz imaging radar.

Automatic Categorization for Improving Spanish into Spanish Sign Language Machine Translation

This paper describes a preprocessing module for improving the performance of a Spanish into Spanish Sign Language (Lengua de Signos Espanola: LSE) translation system when dealing with sparse training data. This preprocessing module replaces Spanish words with associated tags. The list with Spanish words (vocabulary) and associated tags used by this module is computed automatically considering those signs that show the highest probability of being the translation of every Spanish word. This automatic tag extraction has been compared to a manual strategy achieving almost the same improvement. In this analysis, several alternatives for dealing with non-relevant words have been studied. Non-relevant words are Spanish words not assigned to any sign. The preprocessing module has been incorporated into two well-known statistical translation architectures: a phrase-based system and a Statistical Finite State Transducer (SFST). This system has been developed for a specific application domain: the renewal of Identity Documents and Driver's License. In order to evaluate the system a parallel corpus made up of 4080 Spanish sentences and their LSE translation has been used. The evaluation results revealed a significant performance improvement when including this preprocessing module. In the phrase-based system, the proposed module has given rise to an increase in BLEU (Bilingual Evaluation Understudy) from 73.8% to 81.0% and an increase in the human evaluation score from 0.64 to 0.83. In the case of SFST, BLEU increased from 70.6% to 78.4% and the human evaluation score from 0.65 to 0.82.

Amorphous piezoresistive and piezoelectric sensors for robotics applications

Ultrasonic transducers have often been used in the development of sensory systems for robotics applications. In most cases, these sensory systems are based on the determination of times of flight for signals from every transducer. In this work we have used piezoresistive and piezoelectric materials to measure the instant and position collision in metallic structures by using the difference of the times of propagation of an acoustic wave when it is produced over a ferromagnetic (iron, steel or another material) based structure. An immediate application of the proposed method is the detection and location of impacts over the metallic links of an industrial robot or the collision position in a metallic structure for an automated inspection

Source Language Categorization for improving a Speech into Sign Language Translation System

This paper describes a categorization module for improving the performance of a Spanish into Spanish Sign Language (LSE) translation system. This categorization module replaces Spanish words with associated tags. When implementing this module, several alternatives for dealing with non-relevant words have been studied. Non-relevant words are Spanish words not relevant in the translation process. The categorization module has been incorporated into a phrase-based system and a Statistical Finite State Transducer (SFST). The evaluation results reveal that the BLEU has increased from 69.11% to 78.79% for the phrase-based system and from 69.84% to 75.59% for the SFST.

Airborne ultrasonic vortex generation using flexible ferroelectrets

Cellular ferroelectrets exhibit interesting electromechanical- acoustical characteristics. Their recent appearance and remarkable properties open up new possibilities for the design and development of ultrasonic transducers. In particular, the feasibility of fabricating ultrasonic vortex generators using ferroelectret films is demonstrated in this work. To this end, a transducer prototype was built by gluing the material onto a tangential-helical surface (outer diameter: 40 mm, pitch: 3.45 mm). Experimental results agree well with the theoretical estimation of the pressure and phase of the acoustic field in the near field and far field, which corroborates the potential of ferroelectrets to customize special acoustic fields. Furthermore, the proposed fabrication procedure is inexpensive and represents a new alternative for exploring and analyzing the special characteristics of acoustical helical wavefronts

Amplificador de señal analógico basado en conceptos biomiméticos. Desarrollo de modelos computacionales y validación experimental

La presente tesis doctoral estudia las características de un transductor acústico bioinspirado en la estructura del maxilar inferior de un Zifio de Couvier (Ziphius cavirostris). El mecanismo de funcionamiento del sensor se basa en las características de un sistema acoplado formado por los distintos componentes acústicos identificados en el maxilar. Para analizar las características del sensor se propone un modelo simplificado 2D que consta de una cavidad cerrada con forma de bocina acoplada a una lengüeta. Una parte de la lengüeta se encuentra dentro de la cavidad y otra en el exterior. Dicha lengüeta detecta los cambios de presión acústica y las vibraciones generadas por el sonido y las transmite con ondas de flexión al interior de la cavidad. La excitación prolongada sobre la placa puede provocar la activación de los modos propios del sistema acoplado. Dichos modos se caracterizan porque presentan un máximo de presión en el cono de la bocina la cual a su vez actúa como un amplificador acústico. Mediante el Método de los elementos Finitos se analizan las características acústicas del sensor y se construye un prototipo experimental para validar los resultados evaluados en el modelo numérico. Se propone una metodología numérica que permite desarrollar y validar un elemento tetraédrico para caracterizar el comportamiento isotrópico de los medios porosos. La metodología permite construir elementos de línea y bidimensionales. A partir de esta metodología se desarrolla un elemento plano ortotrópico. Se realiza un modelo de la cavidad en el que una de las paredes de la bocina está constituida por material poroso y se une la parte exterior de la lengüeta a dicho material para que constituya una viga sobre un apoyo elástico. Se calcula la respuesta modal y se discuten los efectos del material poroso en la eficiencia del transductor y las posibles mejoras a introducir en el mismo. SUMMARY This Thesis studies the characteristics of an acoustic transducer bioinspired by the structure of the lower maxilla of an odontoceto. In this case a Cuvier’s beaked whale (Ziphius cavirostris). The transducer working mechanism is based in a coupled system, with components identified in the maxilla. To analyze the transducer a simplified 2D model composed by a horn shaped closed cavity is modeled. The cavity is coupled with a flat belt. The belt has one part inside the cavity and the other part outside of it. The belt traverses the cavity wall and it is in charge to pick the vibrations from outside and introduce it inside the cavity. The transmission is obtained through the belt bending. A sustained external load with the right frequency contents will allow the system to reach a stationary pressure intensity distribution inside the cavity. Frequencies with modal shapes that show an important intensity increase at the horn tip are of special interest because of the signal amplification. A finite element model is constructed to study the transducer coupled modes and a prototype is constructed to validate the numerical results. A numerical methodology to construct and validate a tetrahedral finite element for isotropic porous materials is presented. The methodology allows constructing linear and 2D elements. It is extended to model orthotropic porous materials behavior. At the end, one of the horn walls is made of an orthotropic material and the external belt is glued to it in order to configure a belt over an elastic foundation. Modal response is evaluated and the porous material effects in the transducer efficiency and further improvements are discussed.

Open multi-technology building energy management system

Energy Efficiency is one of the goals of the Smart Building initiatives. This paper presents an Open Energy Management System which consists of an ontology-based multi-technology platform and a wireless transducer network using 6LoWPAN communication technology. The system allows the integration of several building automation protocols and eases the development of different kind of services to make use of them. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

BatNet: a 6LoWPAN-based sensors and actuators network

Improving energy efficiency in buildings is one of the goals of the Smart City initiatives and a challenge for the European Union. This paper presents a 6LoWPAN wireless transducer network (BatNet) as part of an open energy management system. This network has been designed to operate in buildings, to collect environmental information (temperature, humidity, illumination and presence) and electrical consumption in real time (voltage, current and power factor). The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

Bat-MP: An Ontology-Based Energy Management Platform

This paper presents an Ontology-Based multi-technology platform as part of an open energy management system which also comprises a wireless transducer network for control and monitoring. The platform allows the integration of several building automation protocols, eases the development and implementation of different kinds of services and allows sharing of the data of a building. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

Optimization of AlN thin layers on diamond substrates for high frequency SAW resonators

AlN/diamond heterostructures are very promising for high frequency surface acoustic wave (SAW) resonators. In their design, the thickness of the piezoelectric film is one of the key parameters. On the other hand, the film material quality and, hence, the device performance, also depend on that thickness. In this work, polished microcrystalline diamond substrates have been used to deposit AlN films by reactive sputtering, from 150 nm up to 3 μm thick. A high degree of the c-axis orientation has been obtained in all cases. SAW one port resonators at high frequency have been fabricated on these films with a proper combination of the film thickness and transducer size.

Resonancias de los paradigmas científicos en las arquitecturas de la Escuela de Madrid

Los años cincuenta y sesenta son los años de la incorporación definitiva de la arquitectura española al panorama internacional. Entre los arquitectos que protagonizan ese salto sin retorno, se encuentra el grupo de aquellos que unos años más tarde serán denominados por Juan Daniel Fullaondo como Escuela de Madrid. Carlos Flores, en su libro Arquitectura Española Contemporánea 1880-1950, se refiere a esos arquitectos como aquellos que se aplicaban a la difícil tarea de restablecer en España un tipo de arquitectura que conectaba con las teorías, soluciones y lenguajes establecidos por Europa durante las primeras décadas del siglo XX. Sigfried Giedion plantea en Espacio, Tiempo y Arquitectura el origen de una nueva tradición, surgida a partir de la revolución óptica de principios de siglo. Con tradición se refiere a una nueva cultura, que abarca la interrelación de las diferentes actividades del hombre: la similitud de los métodos que se usan en la arquitectura, la construcción, la pintura, el urbanismo o la ciencia. Esa novedad, fundamentada en su independencia y desvinculación con el periodo anterior, se inscribe dentro del esquema evolutivo que Thomas Kuhn plantea en su texto La Estructura de la Revoluciones Científicas, conforme a periodos no acumulativos. Kuhn habla del surgimiento de anomalías en cada periodo, origen de las crisis de pensamiento cuya explicación precisará un necesario cambio paradigmático. En la ciencia, en el campo de la óptica Thomas Young demuestra a principios del siglo XIX la naturaleza ondulatoria de la luz con su experimento de doble rendija; en el electromagnetismo se produce el salto conceptual que supone la postulación de la existencia del campo eléctrico por parte de Michael Faraday, y en termodinámica la consideración apuntada por Planck de que la radiación de la energía de produce de forma discreta, a través de cuantos. En las artes plásticas, paralelamente, Gleizes y Metzinger, en su recopilación de logros cubistas recogida en Sobre el Cubismo, hablan de la evolución sufrida durante el siglo XIX por la pintura: desde el idealismo de principios de siglo, para pasando por el realismo y la representación impresionista de la realidad, concluir prescindiendo de la perspectiva clásica. También la matemática, una vez desarrolladas por Gauss o Lobachevsky y Bolyai geometrías coherentes que incumplen el quinto postulado de Euclides, terminará dando validez a través de Riemann a los espacios ambiente en los que habitan dichas geometrías, desvinculando la relación directa entre espacio geométrico –el espacio ambiente al que da lugar un tipo de geometría- y el espacio físico. Capi Corrales refleja en su libro Contando el Espacio, cómo hasta la teoría de la relatividad y el cubismo, las geometrías no euclídeas no se hicieron notorias también fuera del campo de las matemáticas. El origen de la nueva tradición con la que Giedion se refiere a la nueva cultura de la modernidad coincide con los saltos paradigmáticos que suponen la teoría de la relatividad en las ciencias y el cubismo en las artes plásticas. Ambas se prolongan durante las primeras décadas hasta la teoría cuántica y la abstracción absoluta, barreras que los dos principales precursores de la relatividad y el cubismo, Einstein y Picasso, nunca llegan a franquear. En ese sentido Giedion habla también, además del origen, de su desarrollo, e incorpora las aportaciones periféricas en la arquitectura de Brasil, Japón o Finlandia, incluyendo por tanto la revisión orgánica propugnada por Zevi como parte de esa nueva tradición, quedando abierta a la incorporación tardía de nuevas aportaciones al desarrollo de esa cultura de la modernidad. Eliminado el concepto de la estética trascendental de Kant del tiempo como una referencia absoluta, y asumido el valor constante de la velocidad de la luz, para la teoría de la relatividad no existe una simultaneidad auténtica. Queda así fijada la velocidad de la luz como uno de los límites del universo, y la equivalencia entre masa y energía. En el cubismo la simultaneidad espacial viene motivada por la eliminación del punto de vista preferente, cuyo resultado es la multiplicidad descriptiva de la realidad, que se visualiza en la descomposición en planos, tanto del objeto como del espacio, y la consecuente continuidad entre fondo y figura que en arquitectura se refleja en la continuidad entre edificio y territorio. Sin la consideración de un punto de vista absoluto, no existe una forma auténtica. El cubismo, y su posterior desarrollo por las vanguardias plásticas, hacen uso de la geometría como mecanismo de recomposición de la figura y el espacio, adoptando mecanismos de penetración, superposición y transparencia. Gyorgy Kepes indica en El Lenguaje de la Visión que la descomposición cubista del objeto implica la sucesiva autonomía de los planos, hasta convertirse en elementos constituyentes. Algo que refleja las axonometrías arquitectónicas de Van Doesburg y que culmina con los espacios propuestos por Mies van der Rohe en sus primeros proyectos europeos. Estos mecanismos, encuentran eco en los primeros planteamientos de Javier Carvajal: en la ampliación del Panteón de españoles del cementerio de Campo Verano, un recinto virtual reconstruido mentalmente a partir del uso de tres únicos planos; o en el Pabellón de Nueva York, que organiza su planta baja desde el recorrido, introduciendo el parámetro temporal como una dimensión más. Al uso diferenciado del plano como elemento constituyente, Carvajal incorpora su plegado y su disposición conformando envolventes como mecanismo de cualificación espacial y formal, potenciando la prolongación entre arquitectura y territorio. Una continuidad que quedará culminada en las dos viviendas unifamiliares construidas en Somosaguas. La descomposición volumétrica conduce a unos niveles de abstracción que hace precisa la incorporación de elementos de la memoria -fuentes, patios, celosías…- a modo de red de señales, como las que Picasso y Braque introducen en sus cuadros para permitir su interpretación. Braque insiste en el interés por el espacio que rodea a los objetos. Una búsqueda de la tactilidad del espacio contraria a la perspectiva que aleja el objeto del observador, y que en los jardines de las viviendas de Somosaguas parece emanar de su propia materialidad. Un espacio táctil alejado del espacio geométrico y que Braque identifica con el espacio representativo en el que Poincaré, en La Ciencia y la Hipótesis, ubica nuestras sensaciones. Desdibujar los límites del objeto prolonga el espacio indefinidamente. Con el paso en el arte griego del mito al logos, se abre paso a la matemática como herramienta de comprensión de la naturaleza hasta el siglo XIX. Leon Lederman, en Simetría y la Belleza del Universo, apunta a que una de las mayores contribuciones de la teoría de Einstein es hacer cambiar el modo de pensar la naturaleza, orientándolo hacia la búsqueda de los principios de simetría que subyacen bajo las leyes físicas. Considerando que la simetría es la invariancia de un objeto o un sistema frente a una transformación y que las leyes físicas son las mismas en cualquier punto del espacio, el espacio de nuestro universo posee una simetría traslacional continua. En la ocupación del espacio de las primeras propuestas de Corrales y Molezún aparecen estructuras subyacentes que responden a enlosetados: paralelogramos sometidos a transformaciones continuas, que la naturaleza identifica tridimensionalmente con los grupos cristalográficos. Las plantas del museo de Arte Contemporáneo de la Castellana, la residencia de Miraflores, el pabellón de Bruselas o la torre Peugeot pertenecen a este grupo. La arquitectura como proceso de ocupación continua del territorio y de su trasposición al plano de cubierta, se materializa en líneas estructurales coincidentes con la estructura matemática de sus simetrías de traslación cuya posibilidad de prolongación infinita queda potenciada por el uso de la envolvente transparente. Junto a esta transparencia literal, inherente al material, Colin Rowe y Robert Slutzky nos alertan sobre otra transparencia inherente a la estructura: la transparencia fenomenal, ilustrada por los cuadros de Juan Gris, y cuya intuición aparece reflejada en la casa Huarte en Puerta de Hierro de Madrid. Corrales y Molezún insisten en una lectura de su volumetría alejada de la frontalidad, en la que los contornos de sus cubiertas inclinadas y las visuales tangenciales sugeridas por la organización de sus recorridos introducen una estructura diagonal que se superpone al entendimiento ortogonal de su planta, dibujando una intrincada red de líneas quebradas que permiten al espacio fluctuar entre las secuencia volumétrica propuesta. Los datos relativos al contenido energético de la luz y el concepto de átomo parten de la consideración de la emisión de energía en cuantos realizada por Planck, y concluyen con una circunstancia paradójica: la doble naturaleza de la luz -demostrada por la explicación de Einstein del efecto fotoeléctrico- y la doble naturaleza de la materia -asumida por Bohr y demostrada por el efecto Compton-. Schrödinger y Heisenberg formularán finalmente la ecuación universal del movimiento que rige en las ondas de materia, y cuya representación matemática es lo que se conoce como función de onda. El objeto es así identificado con su función de onda. Su ondulatoriedad expresará la probabilidad de encontrarse en un lugar determinado. Gyorgy Kepes subraya la necesidad de simplificar el lenguaje para pasar de la objetividad que aún permanece en la pintura cubista a la abstracción total del espacio. Y es así como los artistas plásticos reducen los objetos a simples formas geométricas, haciendo aflorar a la vez, las fuerzas plásticas que los tensionan o equilibran, en un proceso que acaba por eliminar cualquier atisbo de materia. Robert Rosenblum en La Pintura Moderna y la Tradición del Romanticismo Nórdico habla de cómo ese rechazo de la materia en favor de un vacío casi impalpable, campos luminosos de color denso que difunden un sereno resplandor y parecen engendrar las energías elementales de la luz natural, está directamente vinculado a la relación con la naturaleza que establece el romanticismo nórdico. La expresión de la energía de la naturaleza concentrada en un vacío que ya había sido motivo de reflexión para Michael Faraday en su postulación del concepto de campo eléctrico. Sáenz de Oíza incide en la expresión de la condición material de la energía en su propuesta junto a José Luis Romany para la capilla en el Camino de Santiago. La evocación de diferentes fuerzas electromagnéticas, las únicas junto a las gravitatorias susceptibles de ser experimentadas por el hombre, aparecerán visualizadas también en el carácter emergente de algunas de sus obras: el Santuario de Aránzazu o Torres Blancas; pero también en la naturaleza fluyente de sus contornos, la dispersión perimetral de los espacios -el umbral como centro del universoo la configuración del límite como respuesta a las tensiones germinales de la naturaleza. Miguel Fisac, a la vuelta de su viaje a los países nórdicos, aborda una simplificación lingüística orientada hacia la adecuación funcional de los espacios. En el Instituto de Daimiel, el Instituto de formación del profesorado o los complejos para los Padres Dominicos en Valladolid o Alcobendas, organiza progresivamente la arquitectura en diferentes volúmenes funcionales, incidiendo de un modo paralelo en la manifestación de los vínculos que se establecen entre dichos volúmenes como una visualización de las fuerzas que los tensionan y equilibran. En ellos la prolongación de la realidad física más allá de los límites de la envolvente ya es algo más que una simple intuición. Un proceso en el que el tratamiento de la luz como un material de construcción más, tendrá un especial protagonismo. En la iglesia de la Coronación, la iluminación del muro curvo escenifica la condición ondulatoria de la luz, manifestándose como si de un patrón de interferencia se tratara. Frente a la disolución de lo material, el espacio se manifiesta aquí como un medio denso, alejado de la tradicional noción de vacío. Una doble naturaleza, onda y partícula, que será intuido también por Fisac en la materia a través de su uso comprometido del hormigón como único material de construcción. Richard Feynmann nos alerta de la ocupación del espacio por multitud de fuerzas electromagnéticas que, al igual que la luz, precisan de receptores específicos para captar su presencia. Sus célebres diagramas suponen además la visualización definitiva de los procesos subatómicos. Al igual que la abstracción absoluta en las artes plásticas, esas representaciones diagramáticas no son asimilables a imágenes obtenidas de nuestra experiencia. Una intuición plasmada en el uso del diagrama, que irán adquiriendo progresivamente los dibujos de Alejandro de la Sota. La sección del gimnasio Maravillas recoge los trazos de sus principales elementos constructivos: estructura, cerramientos, compartimentaciones…, pero también, y con la misma intensidad, los de las fuerzas que generan su espacio, considerando así su condición de elementos constituyentes. El vacío, nos deja claro Sota, es el lugar donde habitan dichas tensiones. La posterior simplificación de las formas acompañadas de la obsesión por su aligeramiento, la casi desaparición de la envolvente, incide en aquella idea con la que Paul Klee define la actividad del artista en su Teoría del Arte Moderno, y en la que se transmite el distanciamiento hacia lo aparente: No se trata de reproducir lo visible, se trata de volver visible. Así, en Bankunión y Aviaco, como en tantos otros proyectos, frente al objetivo de la forma, Sota plantea el límite como la acotación de un ámbito de actuación. Su propia representación aséptica y diagramática transmite la renuncia a una especificidad espacial. Gilles Deleuze expresa ese posicionamiento en Pintura, el Concepto de Diagrama: el diagrama como la posibilidad de cuadros infinitos, o la posibilidad infinita de cuadros. Aparece así una concepción probabilística del espacio en la que frente a la renuncia por la forma, la tendencia al aligeramiento, y lo difuso de su definición – ideas claras, definición borrosa, en palabras de Llinás referidas al modo de operar de Sota-, la insistente atención a algunos elementos como escaleras, protecciones o miradores parece trasmitir la idea de que la arquitectura queda condensada en aquellos acontecimientos que delatan su condición dinámica, transitoria. Primando la relación frente al objeto, el vínculo frente a lo tangible. English summary. The fifties and sixties were the years of the final incorporation of Spanish architecture to the international scene. Among the architects who star that no return leap, is the group of those who a few years later will be named by Juan Daniel Fullaondo as Escuela de Madrid. Carlos Flores, in his book Arquitectura Española Contemporánea 1880-1950, refers to those architects as those that applied to the difficult task of restoring in Spain an architecture that connected with theories, solutions and established languages in Europe during the first decades of the twentieth century. Sigfried Giedion proposes in Space, Time and Architecture, the origin of a new tradition, arising from the optical revolution at the beginning of the century. With tradition he refers to a new culture, covering the interplay of different human activities: the similarity of the methods used in architecture, building, painting, urban planning or science. This new feature, based on its independence and detachment from the previous period, is part of the evolutionary scheme that Thomas Kuhn proposes in his text The Structure of Scientific Revolutions, according to non-accumulative periods. Kuhn talks about the emergence of anomalies in each period, origin of thought crisis whose explanation will require a paradigm shift needed. In science, in the field of optical Thomas Young demonstrates at the early nineteenth century the wave nature of light with its double-slit experiment , in electromagnetism the postulation of the existence of the electric field by Michael Faraday involves a conceptual leap, and in thermodynamic, the consideration pointed by Planck about quantum energy radiation. In the arts, in a parallel process, Gleizes and Metzinger , in his collection of cubism achievements on their book Du Cubisme, speak of evolution occurring during the nineteenth century by the painting: from the idealism of beginning of the century, going for realism and impressionist representation of reality, and finishing regardless of the classical perspective . Mathematics also, once developed by Gauss and Lobachevsky and Bolyai consistent geometries that violate Euclid's fifth postulate , will end validating Riemann’s ambient spaces in which these geometries inhabit, decoupling the direct relationship between geometric space -the space environment that results in a type of geometry- , and physical space. Capi Corrales reflectes in his book Contando el Espacio, that non-Euclidean geometries were not noticeable outside the field of mathematics until the theory of relativity and cubism. The origin of the new tradition that Giedion relates to the new culture of modernity coincides with paradigmatic leaps pointed by the theory of relativity in science and Cubism in the visual arts. Both are extended during the first decades until quantum theory and absolute abstraction, barriers that the two main precursors of relativity and cubism, Einstein and Picasso never overcome. In that sense Giedion speaks about the origin, but also the development, and incorporates peripheral inputs from Brazil, Japan and Finland architecture, thus including organic revision advocated by Zevi as part of this new tradition, being open to the late addition of new contributions to the development of that culture of modernity. Removed the concept of Kant's transcendental aesthetics, of time as an absolute reference, and assumed the constant value of the speed of light, theory of relativity says there is no authentic concurrency. It is thus fixed the speed of light as one of the limits of the universe, and the equivalence of mass and energy. In cubism, spatial simultaneity results from the elimination of preferential points of view, resulting in the multiplicity descriptive of reality, which is displayed in decomposition levels, both the object and the space, and the resulting continuity between figure and background that architecture is reflected in the continuity between building and land. Without the consideration of an absolute point of view, there isn’t an authentic shape. Cubism, and its subsequent development by the vanguard arts, make use of geometry as a means of rebuilding the figure and space, taking penetration mechanisms, overlapping and transparency. Gyorgy Kepes suggest in Languaje of Vision, that cubist decomposition of the object involves successive planes autonomy, to become constituent elements. Something that reflects the Van Doesburg’s architectural axonometrics and culminates with the spaces proposed by Mies van der Rohe in his first European projects. These mechanisms are reflected in the first approaches by Javier Carvajal: the extension of Spanish Pantheon in Campo Verano Cemetery, virtual enclosure mentally reconstructed from 24 the use of only three planes, or in the Spanish Pavilion of New York, which organizes its ground floor from the tour, introducing the time parameter as an additional dimension. Carvajal adds to the differential use of the plane as a constituent, Carvajal incorporates its folding and forming enclosures available as a mechanism for spatial and formal qualification, promoting the extension between architecture and territory. A continuity that will be completed in the two houses built in Somosaguas. Volumetric decomposition, as the fragmentation achieved in the last cubist experiences, needs the incorporation of elements of memory - fountains, patios, shutters...- as a network of signals, such as those introduced by Picasso and Braque in their paintings to allow their interpretation. Braque insists in his interest in the space surrounding the objects. A search of the tactility of space contrary to the perspective, which moves the observer away from the object, and that in the gardens of Somosaguas seems to emanate from its own materiality. A tactile space away from the geometric space and Braque identified with the representative space in which Poincaré in La Science et l´hypothèse, located our feelings. To blur those boundaries of the object extends the space indefinitely. With the passage in Greek art from myth to logos, it opens up to mathematics as a tool for understanding the nature until the nineteenth century. Leon Lederman, in Symmetry and beautiful Universe, suggests that one of the greatest contributions of Einstein's theory is to change the mindset of nature, namely the search for symmetry principles that underlie physical laws. Considering that symmetry is the invariance of an object or system from a transformation and that physical laws are the same at any point in space, the space of our universe has a continuous translational symmetry. In the space occupation of the first proposals by Corrales and Molezún underlying structures appear that match enlosetados: parallelograms under continuous transformations, which nature identifies tridimensionally with the crystallographic groups. Plants in the Contemporary Art Museum in La Castellana, the residence in Miraflores, the Brussels pavilion or the Peugeot tower belong to this group. The architecture as a process of continuous occupation of the territory and of its transposition to the deck, embodied in structural lines coincide with the mathematical structure of the translational symmetry and infinite extension whose possibility is enhanced by the use of the transparent cover. Alongside this literal transparency inherent to the material, Colin Rowe and Robert Slutzky alert us another transparency inherent in the structure: phenomenal transparency, illustrated by the Juan Gris’ works, and whose intuition is reflected in the Huarte’s house in Puerta de Hierro in Madrid. Corrales and Molezún insist on a reading of its volume away from the frontal, in which the outline of their inclined roofs and tangential visual suggested by the organization of his circulations introduce a diagonal structure which overlaps the orthogonal understanding of its plant, drawing an intricate web of broken lines that allow the space fluctuate between the volumetric sequence proposal. Information concerning to the energy mean of light and the concept of atom start from the consideration by Plank about the energy emission, and conclude with a paradoxical situation: the dual nature of light - demonstrated by the explanation of Einstein's photoelectric effect-, and the dual nature of matter -assumed by Bohr and demonstrated by the Compton effect-. Finally, Schrödinger and Heisenberg will formulate the universal movement equation governing in undulatory matter, whose mathematical representation is what is known as a wave function. The object is thus identified with its wave function. Its undulatory expression speaks about the probability of being found in a certain place. Gyorgy Kepes emphasizess the need to simplify the language to move from the objectivity that still remains in the cubist painting to the total abstraction of the space. And this is how artists reduced the objects to simple geometric shapes, making emerge at a time, the plastic forces that tense or balance them, in a process that eventually eliminate any trace of matter. Robert Rosenblum in Modern Painting and the Northern Romantic Tradition. Friedrich to Rothko talks about how this rejection of matter in an almost impalpable vacuum: dense color light fields that broadcast a serene glow and seem to generate the elemental energies of natural light is directly linked to the relationship with nature that sets the northern romanticism. An expression of the power of nature concentrated in a vacuum which had been reason for thought by Michael Faraday in his application of the concept of electric field. Saenz de Oíza touches upon the material expression of the energy in its proposal with Jose Luis Romany to the chapel on the Camino de Santiago. The presence of electromagnetic forces, the only ones with the gravitational one capable of being experienced by the man will also visualize in the emerging nature of some of his works: the sanctuary of Aránzazu or Torres Blancas, but also in the flowing nature of its contours, and the inclusion of interest in the realization of space fluctuating boundary: the threshold as the center of the universe. Miguel Fisac, back from his trip to the Northern Countries, starts on a linguistic simplification oriented to the functional adequacy of spaces. In the Daimiel Institute, in the Institute to Teacher Formation or in the complex to the Dominican Fathers in Valladolid or Alcobendas, progressively organized into different functional volumes architecture, focusing in a parallel way in the manifestation of the links established between these volumes as a visualization of the forces that tense and balance them. The prolongation of the physical reality beyond the limits of the envelope is already something more than a simple intuition. A process in which the treatment of light as a construction material, have a special role. In the Coronation church, curved wall lighting dramatizes the undulatory condition of the light, manifesting as if an interference pattern is involved. Versus the dissolution of the material, the space is expressed here as a dense atmosphere, away from the traditional notion of the vacuum. A dual nature, wave and particle, which is also sensed by Fisac in his committed use of concrete as a unique construction material. Richard Feynman alerts us to the occupation of space by many electromagnetic forces, which like the light, require specific receptors to capture their presence. His famous diagrams also involve the final visualization of atomic processes. As absolute abstraction in the visual arts, these representations are not assimilated to images obtained from our experience. A diagrammatic nature, abstracted from figuration, which will obtein the pictures of Alejandro de la Sota. The section of Maravillas gym collects traces of its main building blocks: structure, enclosures... but also, and with the same intensity, of the forces that generate their space as constituent elements. Sota makes it clear: the vacuum is where inhabit these tensions. The subsequent simplification of forms, accompanied by the obsession with his lightening, the near disappearance of the envelope, touches upon that idea which Paul Klee defines the activity of the artist in his Modern Art Theory, the spacing out to the apparent: it is not to reproduce the visible, it is to turn visible. Thus, in Bankunión and Aviaco, as in many other projects, against the shape, raises the limit as the dimension of a scope. His own aseptic and diagrammatic representation transmits waiver to a spatial specificity that Gilles Deleuze clearly expressed in Painting. The Concept Diagram: The diagram as the possibility of infinite pictures, or infinite possibility of the picture. Thus appears the probabilistic concept of space in which, opposite to the diffuse of its definition -clear ideas, diffuse definition, as Llinas said- the insistent attention to some elements like stairs, guards or lookouts seems to concentrate the architecture in its dynamic condition, transitional. The relationship opposite the object, the link opposite the tangible.

Efecto del Cross-talk en la respuesta de un Transductor Ultrasónico tipo PZT

El presente trabajo de tesis investiga el efecto del fenómeno conocido como “Cross-talk” generado por el modo lateral de vibración, en la respuesta de un transductor ultrasónico formado por un arreglo de elementos piezoeléctricos tipo PZT (Zircanato Titanato de Plomo), la investigación se lleva a cabo desde el punto de vista de la naturaleza física de este efecto, así como de los parámetros asociados al mismo, así como un análisis del efecto del “Cross-talk” en la respuesta del transductor, formado por arreglos de elementos piezoeléctricos. Diversas investigaciones han abordado el fenómeno del “Cross-talk” y de sus efectos en la respuesta de los transductores, estos se han enfocado principalmente al modo espesor (thickness) de vibración. Sin embargo no ha habido un estudio a fondo para el estudio de este fenómeno en el modo lateral de vibración tema de interés de este trabajo de tesis. Este trabajo incluye simulaciones del fenómeno del “Cross-talk” mediante el método de los elementos finitos (MEF), así como la construcción de un transductor tipo matricial (arrray) de 2x3 elementos, en el que fueron realizadas las mediciones físicas del fenómeno. El trabajo abarca un estudio comparativo entre las simulaciones y las mediciones realizadas en el transductor, considerando que las cerámicas del transductor están montadas sobre diferentes materiales (backing) en donde la propagación de la energía emitida por las cerámicas piezoeléctricas provoca un mayor o menor grado de “Cross-talk” dependiendo de la velocidad en que se propaga dicha energía. Esta investigación también llevó a cabo el estudio del efecto del “Cross-talk” en el patrón de radiación que emite el arreglo de elementos piezoeléctricos, siendo este patrón de radiación un factor importante en la respuesta del transductor, motivo por el cual se realizó un análisis de cómo se ve afectado este patrón bajo la influencia del fenómeno del “Cross-talk”. Como ya se mencionó debido a la falta de un estudio a profundidad del fenómeno del “Cross-talk” en el modo lateral, la contribución del presente trabajo es importante ya que se enfoca al modo lateral de vibración de los elementos piezoeléctricos del arreglo. En particular se desarrollo una ecuación que permite cuantificar el fenómeno del “Cross-talk” y visualizar sus efectos en el arreglo. Derivando de este estudio se concluye que el fenómeno del “Cross-talk” generado por el modo lateral de vibración tiene un efecto significativo en la respuesta de los diferentes transductores matriciales considerados. ABSTRACT This thesis investigates the effect of the phenomenon known as crosstalk from the point of view of its physical nature and the elements that lead to the formation of this phenomenon to an analysis of how it may affect the performance of the ultrasonic transducer. This phenomenon occurs primarily in matrix arrays and this phenomenon is magnified by certain factors causing serious problems in the performance of a transducer. Researchers have addressed the phenomenon of crosstalk and their effects on the response of these transducers. They have mainly focused in the thickness vibration mode, and there has been no comprehensive study of this phenomenon in the lateral vibration mode, issue of interest of this thesis. This work includes simulations of the crosstalk phenomenon using the finite element method (FEM), and the construction of a matrix type transducer (array) of 2x3 elements, in which physical measurements were made. The work includes a comparative study between simulations and measurements in the transducer, whereas the ceramic transducer are mounted on different materials (backing) where the spread of the energy emitted by the piezoelectric ceramic causes a greater or lesser degree of crosstalk depending on the speed at which this energy spreads. This research also carried out the study of the effect of the crosstalk in the radiation pattern emitted by the piezoelectric array. The radiation pattern is an important factor in the response of the transducer that is why we conducted an analysis of how this pattern is affected under the influence of the crosstalk phenomenon. As mentioned before because of the lack of an in-depth study of the crosstalk phenomenon in the lateral vibration mode, the contribution of this work is important because it focuses in this vibration mode of the piezoelectric elements in the array. In particular, an equation was developed to quantify the crosstalk phenomenon and to see its effects in the array. Deriving from this study it is possible to conclude that the crosstalk phenomenon generated by the lateral vibration mode has a significant effect on the response of the different matrix transducers considered in this work.