Small-scale variation of vegetation in a mixed forest understorey is partly controlled by the effect of overstory composition on litter accumulation

We investigated how richness and composition of vascular plant species in the understory of a mixed hardwood forest stand varied with respect to the abundance and composition of the overstory. The stand is in central Spain and represents the southernmost range of distribution of several tree and herbaceous species in Europe. Understory species were identified in 46 quadrats (0.25 m2) where variables litter depth and light availability were measured. In addition, we estimated tree density, basal area, and percent basal area by tree species within 6-m-radius areas around each plot. Species richness and composition were studied using path analysis and scale-dependent geostatistical methods, respectively. We found that the relative abundance of certain trees species in the overstory was more important than total overstory abundance in explaining understory species richness. Richness decreased as soil litter depth increased, and soil litter increased as the relative proportion of Fagus sylvatica in the overstory increased, which accounted for a negative, indirect effect of Fagus sylvatica on richness. Regarding understory species composition, we found that some species distributed preferentially below certain tree species. For example, Melica uniflora was most frequent below Fagus sylvatica and Quercus petraea while the increasing proportion of Q. pyrenaica in the overstory favored the presence of Cruciata glabra, Arenaria montana, Prunus avium, Conopodium bourgaei, Holcus mollis, Stellaria media and Galium aparine in the understory. Overall, these results emphasize the importance of individual tree species in controlling the assemblage and richness of understory species in mixed stands. We conclude that soil litter accumulation is one way through which overstory composition shapes the understory community.

The relevance of seed size in modulating leaf physiology and early plant performance in two tree species

he size of seeds and the microsite of seed dispersal may affect the early establishment of seedlings through different physiological processes. Here, we examined the effects of seed size and light availability on seedling growth and survival, and whether such effects were mediated by water use efficiency. Acorns of Quercus petraea and the more drought-tolerant Quercus pyrenaica were sowed within and around a tree canopy gap in a sub-Mediterranean forest stand. We monitored seedling emergence and measured predawn leaf water potential (Ψpd), leaf nitrogen per unit area (Na), leaf mass per area, leaf carbon isotope composition (δ13C) and plant growth at the end of the first summer. Survival was measured on the next year. Path analysis revealed a consistent pattern in both species of higher δ13C as Ψpd decreased and higher δ13C as seedlings emerged later in the season, indicating an increase in 13C as the growing season is shorter and drier. There was a direct positive effect of seed size on δ13C in Q. petraea that was absent in Q. pyrenaica. Leaf δ13C had no effect on growth but the probability of surviving until the second year was higher for those seedlings of Q. pyrenaica that had lower δ13C on the first year. In conclusion, leaf δ13C is affected by seed size, seedling emergence time and the availability of light and water, however, leaf δ13C is irrelevant for first year growth, which is directly dependent on the amount of seed reserves.

Diseño de un modelo de sistema inteligente como soporte de decisión para la gestión empresarial en las Pymes

La tesis contiene un modelo dirigido a servir de soporte a la toma de decisiones para la mejora de la gestión empresarial en las pymes. Para la construcción del modelo, se dividió la gestión empresarial en doce (12) subsistemas de gestión, a saber: Gestión Estratégica, Mercadeo, Gestión Productiva, Recursos Humanos, Gestión Financiera, Logística, Mantenimiento, Gestión de la Calidad, Seguridad y Salud Laboral, Gestión de la Información y la Comunicación, Innovación y Gestión Ambiental. El enfoque teórico utilizado es que en cada uno de estos subsistemas está contenido el ciclo formado por los procesos Planificar/Hacer/Verificar/Actuar (PHVA); la hipótesis de partida es que existe una correlación positiva significativa entre los procesos o variables exógenas Planificar, Hacer, Verificar, Actuar y el proceso o variable endógena Gestión. Cualquier mejora que se introduzca en los procesos del ciclo tendrá un efecto positivo en la gestión y por ende, en los resultados de la organización. Para la determinación de los factores o ítems que conforman cada uno de los procesos del ciclo PHVA, se llevó a cabo una revisión del estado del arte para cada subsistema de gestión; posteriormente, los ítems seleccionados (335 en total) fueron validados por un equipo de expertos en el tema. Para recopilar los datos necesarios que soportan estadísticamente al modelo, se llevó a cabo un estudio empírico, mediante la aplicación de cuestionarios y entrevistas no estructuradas al personal perteneciente a un grupo de ciento veinticinco (125) pymes del sector industrial, en el Estado Bolívar, Venezuela. El estudio empírico, de tipo transversal, abarcó un período de tres años, en el cual se entrevistaron a 4.500 individuos; la información obtenida se utilizó además, para caracterizar la gestión de las pymes industriales. El análisis de datos comprendió el análisis descriptivo de los mismos, estimación de fiabilidad, análisis factorial exploratorio y confirmatorio, análisis de coeficientes de correlación y de regresión, a través del software SPSS v.20. Para examinar las relaciones causales entre los procesos P/H/V/A y cada uno de los subsistemas de gestión, se utilizó la técnica del análisis de senderos (path analysis), con el uso de AMOS v.20. Los resultados del análisis estadístico señalan que los procesos de ejecución y planificación (y por ende las variables que contienen) tienen el mayor impacto significativo sobre la gestión, respecto a los procesos de verificación y mejora continua, en el sector industrial estudiado. El prototipo de modelo de sistema inteligente diseñado cuenta con una base de conocimientos, construida a partir de la experiencia de los expertos y la revisión del estado del arte; una base de hechos representada por los resultados de la evaluación aplicada a cada empresa, y un motor de inferencia, el cual identifica las áreas de mejora y propone las soluciones para resolver los problemas de mayor impacto. El aporte de esta investigación puede ser valorado de dos maneras: desde el punto de vista empresarial, en el sentido de proveer a las pymes de una herramienta para evaluar y mejorar su gestión, y académico, al proporcionar una guía para comprender mejor la interrelación de las variables envueltas en los diversos procesos de gestión de una empresa.

Modelo de gestión de la responsabilidad social para las empresas del sector petrolero venezolano

El presente trabajo tiene como objetivo diseñar un modelo de gestión de responsabilidad social sustentado en estándares internacionales para las empresas del sector petrolero venezolano. Esta investigación no se suscribe a un modelo epistémico en particular, como forma parcializada de ver la realidad. Por el contrario, se realizó un abordaje holístico de la investigación, entendiendo el evento de estudio, la gestión de la responsabilidad social, como un evento integrado por distintas visiones de la relación empresa – sociedad. La holística se refiere a una tendencia que permite entender la realidad desde el punto de vista de las múltiples interacciones que la caracterizan. Corresponde a una actitud integradora como también a una teoría explicativa que se orienta hacia una comprensión contextual de los procesos, de los protagonistas y de los eventos. Desde la concepción holística se determinó que la investigación es de tipo proyectiva. Este tipo de investigación propone soluciones a una situación determinada a partir de un proceso de indagación. Implica describir, comparar, explicar y proponer alternativas de cambios, lo que da lugar a los estadios de investigación. En cuanto al diseño de la investigación, aplicando el ciclo holístico, se tiene un diseño que es univariable, transeccional contemporáneo y de fuente mixta. Univariable, porque se enfoca en la gestión de responsabilidad social. Transeccional contemporáneo, porque el evento se estudia en la actualidad y se realiza una sola medición de los datos. De fuente mixta, porque en los estadios descriptivo y explicativo se aplica un diseño de campo, al recolectar los datos directamente en las empresas objeto de estudio, mientras que para los estadios analítico y comparativo se aplica un diseño documental. Las técnicas de recolección de la información estuvieron constituidas por fuentes primarias provenientes de la observación directa, la revisión documental y la aplicación de un cuestionario estructurado tipo escala Likert. El análisis de los datos comprendió el análisis estadístico descriptivo, la estimación de la fiabilidad y el análisis de coeficientes de correlación y análisis de ruta, a través del software estadístico SPSS v.19.0 y AMOS v.20. En los estadios descriptivo y explicativo se estudió la gestión de la responsabilidad social en las empresas del sector petrolero. Los resultados indicaron que las empresas del sector petrolero actúan bajo los lineamientos trazados en el Plan de Desarrollo Nacional y de acuerdo con las políticas, directrices, planes y estrategias para el sector de los hidrocarburos, dictadas por el Ministerio de Energía y Petróleo. También incluyen el compromiso social y la política ambiental en su filosofía de gestión. Tienen en su estructura organizacional una gerencia de desarrollo social que gestiona la responsabilidad social. Las actividades de inversión social se presentan poco estructuradas y en ocasiones se improvisan ya que atienden a los lineamientos políticos del Estado y no a una política interna de sostenibilidad del negocio petrolero. En cuanto a la integralidad de la gestión las empresas no consideran la responsabilidad social en todas las áreas, por lo que deben ampliar su concepción de una gestión responsable, redefiniendo estructuras, estrategias y procesos, con una orientación hacia una gestión sustentable. En cuanto a los estadios analítico y comparativo aplicados al estudio de las guías y estándares internacionales de responsabilidad social, se determinó que en términos de la integralidad de la gestión las iniciativas que destacan son: en cuanto a los principios, las directrices para empresas multinacionales según la OCDE y el Libro Verde de la Unión Europea. En relación con las guías de implementación y control, el Global Reporting Initiative y la norma ISO 26000. Y en cuanto a los sistemas de gestión el Sistema de Gestión Ética y Responsable (SGE 21) y el Sistema de Gestión de Responsabilidad Social IQNET SR10. Finalmente se diseñó una estructura para la gestión integral de responsabilidad social basada en los estándares internacionales y en el concepto de desarrollo sostenible. Por tanto abarca el desarrollo social, el equilibrio ecológico y el crecimiento económico, lo que permite un desarrollo sinérgico. La originalidad del enfoque consistió en la comprensión de la investigación desde una concepción holística, que permitió la integración de las teorías que tratan el tema de la responsabilidad social a través de un abordaje estructurado. ABSTRACT The present research aims to design a model of social responsibility management underpinned by international standards for companies in the Venezuelan oil sector. This research is not framed in a particular epistemic model as a biased way of looking at reality. Instead, a holistic approach to the research was conducted, understanding the event under study, the management of social responsibility as an event composed of different views of the relationship between corporation and society. The term holistic refers to a trend in understanding the reality from the point of view of the multiple interactions that characterize it. It corresponds to an integrative as well as an explanatory theory that is oriented towards a contextual understanding of the processes, of the participants and of the events. From the holistic conception it was determined that this research is of a projective type. The research proposes solutions to a given situation from a process of inquiry. It implies describing, comparing, explaining and proposing alternative changes, which results in the different research stages. Regarding the research design, applying the holistic cycle, an univariate, contemporary cross-sectional and mixed source design is obtained. It is univariate, because it focuses on the management of social responsibility. It is contemporary cross-sectional, because the event is studied in the present time and a single measurement of data is performed. It relies on mixed source, because in the descriptive and explanatory stages a field design is applied when collecting data directly from the companies under study, while for the analytical and comparative stages applies a documentary design is applied. The data collection techniques were constituted by primary sources from direct observation, document review and the implementation of a structured Likert scale questionnaire. The data analysis comprised descriptive statistical analysis, reliability estimates and analysis of correlation and the path analysis through the SPSS v.19.0 and AMOS V.20 statistical software. In the descriptive and explanatory stages social responsibility management in the oil sector companies was studied. The results indicated that the oil companies operate under the guidelines outlined in the National Development Plan and in accordance with the policies, guidelines, plans and strategies for the hydrocarbons sector, issued by the Ministry of Energy and Petroleum. They also include the social commitment and the environmental policy in their management philosophy. They have in their organizational structure a social development management which deals with social responsibility. Corporate social investment is presented poorly structured and is sometimes improvised since they follow the policy guidelines of the state and not the internal sustainability policy of the oil business. As for the integrity of management companies they do not consider social responsibility in all areas, so they need to expand their conception of responsible management, redefining structures, strategies and processes, with a focus on sustainable management. As for the analytical and comparative stages applied to the study of international guidelines and standards of social responsibility, it was determined that, in terms of the comprehensiveness of management, the initiatives that stand out are the following: With respect to principles, the guidelines for multinational enterprises as indicated by OECD and the Green Paper of the European Union. Regarding the implementation and control guides, the Global Reporting Initiative and the ISO 26000 standard are relevant. And as for management systems the Ethics and Responsible Management System (SGE 21) and the IQNet SR10 Social responsibility management system have to be considered. Finally a framework for the comprehensive management of social responsibility based on international standards and the concept of sustainable development was designed. Hence, social development, ecological balance and economic growth are included allowing therefore a synergistic development. The originality of this approach is the understanding of research in a holistic way, which allows the integration of theories that address the issue of social responsibility through a structured approximation.

Modelo multidimensional de los factores que afectan la interacción entre marketing y ventas en el lanzamiento de nuevos productos en Latino América

Esta tesis se centra en la identificación y análisis de los factores que pueden favorecer o actuar como barreras del éxito de la implementación de la innovación y las relaciones entre sí, desde el enfoque de la interface marketing-ventas. El trabajo empírico se enmarca en el vacío de investigación existente en el campo del proceso de lanzamiento de nuevos productos en los mercados donde operan subsidiarias de empresas multinacionales de consumo masivo (FMCG). Las empresas FMCG son altamente dependientes de la innovación como proceso clave determinante del crecimiento competitivo de mediano y largo plazo. En un contexto de acortamiento del ciclo de vida de los productos, como resultado del desarrollo tecnológico y científico que impactan en el comportamiento de los consumidores, las empresas invierten un mayor nivel de recursos en el desarrollo de nuevos productos, reingeniería y programas de innovación (Mundra, Gulati y Gupta, 2013). Sin embargo, a pesar del aumento en la inversión, las tasas de éxito de la innovación reportadas son inferiores al 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Aumentar las tasas de éxito de los proyectos de innovación es reconocida en la literatura como un elemento clave para la supervivencia y competitividad de las empresas, para ser superiores a su competencia y desarrollar nuevos modelos de negocios. A pesar de la existencia de estudios que intentan comprender el proceso de lanzamiento de nuevos productos, no se ha identificado un claro prototipo de gestión de la innovación (Gupta et al, 2007). Profundizando en los factores de éxito, los autores Keupp, Palmié y Gassman (2012) reconocen que la innovación exitosa no depende solamente de la estrategia de selección de los proyectos de innovación, sino también la forma en que los mismos son implementados (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). Al analizar la implementación de los proyectos de lanzamiento de nuevos productos al mercado, en empresas FMCG, dicho proceso es responsabilidad principalmente de las funciones de marketing y ventas a través de la comunicación con los consumidores y los clientes respectivamente (Ernst, Hoyer y Rubsaamen, 2010). Es decir que el éxito en la implementación de la innovación requiere la gestión efectiva de la relación inter-funcional entre marketing y ventas (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). A pesar de la importancia de la integración entre marketing y ventas en la conceptualización e implementación de la innovación, este tema no ha sido estudiado en profundidad (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). En las empresas multinacionales, está demostrado que el desempeño de las subsidiarias determinan el éxito competitivo de la empresa a nivel global. El desafío de dichas subsidiarias es conjugar el desarrollo global de innovación y comunicación con las características locales de comportamiento del consumidor y el mercado. Por lo tanto, esta investigación empírica responde a la pregunta académica y de gestión acerca de cómo mejorar las tasas de éxito de lanzamiento de nuevos productos al mercado en subsidiarias de empresas de consumo masivo, desde la perspectiva de la relación entre marketing y ventas. En particular analiza cómo afectan la formalización de los procesos y los mecanismos de comunicación a la confianza interpersonal y a la efectividad de la interface marketing-ventas y dichos factores a su vez sobre la planificación integrada de la implementación de la innovación. La determinación de los factores o ítems que conforman cada uno de los constructos del proceso de ejecución de la innovación, se llevó a cabo a partir de una revisión exhaustiva del estado del arte de la literatura sobre las interfaces funcionales y el proceso de innovación. Posteriormente, los ítems seleccionados (más de 50 en total) fueron validados por referentes de marketing y ventas de Argentina y Uruguay a través de entrevistas en profundidad. A partir de los factores identificados se construyeron dos modelos teóricos: • (1) relativo a la influencia de las dimensiones de confianza interpersonal sobre la efectividad de las uniones inter-funcionales y como los mecanismos organizacionales, tales como la frecuencia y la calidad de la comunicación entre las áreas, afectan la confianza y la relación entre ellas; • (2) relativo a la dimensión planificación integrada de la implementación de la innovación, ya que durante el lanzamiento de nuevos productos al mercado, marketing y ventas utilizan procesos formales que facilitan la comunicación frecuente y efectiva, desarrollando confianza inter-personal que no solamente afecta la efectividad de su relación sino también el desarrollo de planes integrados entre ambas áreas. El estudio fue llevado a cabo en una empresa multinacional de consumo masivo que integra la lista Global 500 (Fortune, 2015), presente en todo el mundo con más de 25 marcas participantes en más de 15 categorías, implementando 150 proyectos de innovación en el último año. El grupo de subsidiarias en estudio fue reconocido a nivel mundial por su desempeño en crecimiento competitivo y su alta contribución al crecimiento total. El modelo analizado en esta tesis fue expandido al resto de América Latina, tratándose entonces de un caso ejemplar que representa una práctica de excelencia en la implementación de la innovación en subsidiarias de una empresa multinacional. La recolección de los datos fue llevado a cabo a través de un cuestionario estructurado y confidencial, enviado a la base de datos de todo el universo de directores y gerentes de marketing y ventas. El nivel de respuesta fue muy elevado (70%), logrando 152 casos válidos. El análisis de datos comprendió el análisis descriptivo de los mismos, estimación de fiabilidad y análisis factorial exploratorio a través del software SPSS v.20. El análisis factorial confirmatorio y el análisis de senderos para examinar las relaciones entre los factores se estudiaron mediante el software R (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finalmente se llevaron a cabo entrevistas en profundidad a gerentes de marketing y ventas de cada uno de los seis países con el fin de profundizar en los constructos y sus relaciones. Los resultados de los modelos demuestran que la frecuencia de comunicación impacta positivamente en la calidad de la misma, que a su vez afecta directamente la relación entre marketing y ventas. Adicionalmente, la calidad de la comunicación impacta sobre la confianza cognitiva, que a su vez se relaciona no solamente con la confianza afectiva sino también con la relación entre ambas áreas. Esto significa que para mejorar la implementación de la innovación, los gerentes deberían orientarse a reforzar la relación entre marketing y ventas facilitando la construcción de confianza interpersonal primero cognitiva y luego afectiva, incrementando la frecuencia de la comunicación que alimenta la calidad de la comunicación entre ambas áreas. A través del segundo modelo se demuestra que durante el lanzamiento de nuevos productos al mercado, marketing y ventas necesitan emplear procesos formales que faciliten la comunicación frecuente y efectiva. De esta forma se contrarresta el efecto negativo de la formalización sobre la planificación integrada entre ambas áreas. Adicionalmente, los gerentes de ambos departamentos deberían promover la construcción de confianza interpersonal, no solamente para mejorar la efectividad de la relación, sino también para desarrollar planes integrados de implementación de nuevos productos. Finalmente, se valida que la frecuencia de la comunicación, la confianza afectiva y la relación marketing-ventas, se relacionan positivamente con la planificación integrada en la implementación de la innovación. El estudio contribuye a la comprensión de los factores que las empresas pueden emplear para mejorar la relación inter-funcional entre marketing y ventas y la implementación de la innovación en empresas de consumo masivo. El aporte de esta investigación puede ser valorado de dos maneras, los aportes a la gestión y a la academia. Desde el punto de vista empresarial, provee a los líderes al frente de empresas de consumo masivo, del conocimiento sobre los factores que afectan la implementación de la innovación y en definitiva el éxito del negocio a mediano y largo plazo. Desde el punto de vista académico aporta al conocimiento del proceso de implementación de la innovación y en la efectividad de la interface marketing y ventas en un caso de buenas prácticas en el mercado de consumo masivo. A su vez incorpora por primera vez un estudio empírico en geografías emergentes capaces de recuperar el camino de crecimiento posterior a una profunda crisis económica a través de la exitosa implementación de la innovación en sus mercados. ABSTRACT This thesis is focused on the identification, analysis and relationship study of factors which may benefit or hinder the successful deployment of innovation, from a marketing-sales interface perspective. Considering the non-existent investigation dedicated to the study of new products launches into markets in which Fast Moving Consumer Goods (FMCG) companies’ subsidiaries operate, it is that this investigation has been carried out. FMCG companies rely on innovation as their key process for a competitive growth on a medium and long term basis. Nowadays, the life-cycle of products is getting shorter as a result of new technological and scientific development, having impact on consumer behavior, and therefore companies are forced to dedicating more resources to the development of new products, reengineering and innovation programs (Mundra, Gulati and Gupta, 2013). However, in spite of the investment increase, the innovation success rates have been reported to be lower than 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Increasing success rates on innovation processes has been considered as a key element on the survival and competitiveness of companies, outperforming competitors and developing new business models. Despite new studies which try to comprehend the process of new products launch, a prototype of innovation management has not yet been identified (Gupta et al, 2007). Emphasizing on success factors, authors Keupp, Palmié and Gassman (2012) recognize that successful innovation does not solely depend on innovation processes’ selection strategy, but it is also based on the way in which these are implemented (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). While analyzing the implementation of projects for new products releases on massive consumption companies, the two departments in charge of taking this forward are marketing and sales, by focusing on communication strategies with consumers and clients respectively (Ernst, Hoyer y Rubsaamen, 2010). This means that having success on innovation implementation requires an effective management of inter-functional relationship among marketing and sales (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). In spite of the importance on the integration between marketing and sales on the conceptualization and implementation of innovation, this subject has not been studied in depth (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). In multinational companies, previous research has confirmed that the performance of their subsidiaries determine the competitive success of the company on a global scale. The challenge of said subsidiaries is to conjugate the global innovation development and communication with the local consumer and market behavior. Therefore, this empirical study aims to respond to the academic and management question of how to improve the success rates of new product launches into MNE subsidiary’ markets, from a marketing-sales relationship perspective. Particularly, this investigation analyses how the formalization of products and communication mechanisms affect interpersonal trust and marketing-sales interface effectiveness and also on how these factors affect the overall planning of the implementation of innovation. The determination of which factors build the hypothesis of the innovation execution process was taken forward through an extensive research on the extant literature on functional interfaces and innovation processes. More than 50 items were selected which were in turn validated by marketing and sales referents on Uruguay and Argentina through in depth interviews. Based on the identified factors, two theoretical models were proposed: (1) Relative to the influence that interpersonal trust dimensions have on inter functional linkages effectiveness and how organizational mechanisms such as frequency and quality of communication between departments affect trust and their relationship. (2) Relative to the integrated planning and innovation implementation dimensions. Marketing and sales department use formal process thus allowing inter-personal trust, which affects positively their relationship and also enables the development of integrated planning between them. The study was performed within a massive consumption company which is part of the “Global 500” (Fortune, 2015), with subsidiaries all over the world and more than 25 participant brands in 15 categories, having implemented over 150 innovation projects in the year under study. The analyzed subsidiary group has been awarded worldwide for their performance in competitive growth and their high contribution to the total growth. The model being analyzed in this thesis was implemented throughout Latin America, representing a remarkable case of innovation implementation excellence for subsidiaries of multinational companies. Data recollection was carried out through a structured and confidential questionnaire, sent to the universe of marketing-sales directors and managers’ database available with a high level of responsiveness of 70%, resulting in 152 valid cases. Data exploration involved a descriptive analysis, followed by a reliability estimation and an exploratory factorial analysis carried out through SPSS v.20. Confirmatory factorial analysis and path analysis (to examine relations between the different study factors) were studied using “R” software (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finally, in depth interviews were carried out to several marketing and sales managers in each of the six countries so as to further confirm the hypothesis and their relations. The models results prove that communication frequency has a positive impact on the quality of the same, which in turn has direct effects on the marketing-sales relations. Additionally, communication quality has an impact on the cognitive trust, which also relates not only to affective trust, but also to the relation between both areas. This means that in order to improve the implementation of innovation, managers should strive to enforce marketing-sales relations, facilitating the interpersonal trust construction (firstly cognitive, followed by affective trust), increasing the communication frequency, and therefore nurturing the communication quality among both areas. Through the second model, the results confirm the importance of creating effective relationships between sales and marketing to facilitate planning integrated new product implementations. While formalized new product development processes provide opportunities for sales and marketing to communicate, this does not directly influence the planning of integrated new product implementations. By using these formal opportunities to communicate to create information quality, it is possible to improve sales and marketing’s ability to integrate information during the planning process. Further, communication quality creates inter-personal trust in the other party’s competences (cognitive-based trust), leading to affect-based trust. Affect-based inter-personal trust, not only to improve the overall effectiveness of the sales and marketing relationship, but also helps in planning integrated new product implementations. This study contributes to the understanding of factors which enterprises can use to improve the inter-functional relations between marketing and sales, and the implementation of innovation in FMCG companies. The contribution of this investigation can be measured in two ways: enrichment of management and contribution to the academic area. From a business perspective, it provides massive consumption businesses leaders with knowledge on which factors affect innovation implementation, which results on mid and long-term success for the company. From an academic point of view, it provides knowledge on a prototype of successful innovation implementation management based on the marketing-sales interface effectiveness through a case study in the FMCG consumption market. Last but not least, it incorporates for the first time an empiric study on emerging geographies capable of recovery post a deep economic crisis through successful innovation implementation on their markets.

Climate change technology transfer to developing countries: evidence analysis and policy recommendations

Developing countries are experiencing unprecedented levels of economic growth. As a result, they will be responsible for most of the future growth in energy demand and greenhouse gas (GHG) emissions. Curbing GHG emissions in developing countries has become one of the cornerstones of a future international agreement under the United Nations Framework Convention for Climate Change (UNFCCC). However, setting caps for developing countries’ GHG emissions has encountered strong resistance in the current round of negotiations. Continued economic growth that allows poverty eradication is still the main priority for most developing countries, and caps are perceived as a constraint to future growth prospects. The development, transfer and use of low-carbon technologies have more positive connotations, and are seen as the potential path towards low-carbon development. So far, the success of the UNFCCC process in improving the levels of technology transfer (TT) to developing countries has been limited. This thesis analyses the causes for such limited success and seeks to improve on the understanding about what constitutes TT in the field of climate change, establish the factors that enable them in developing countries and determine which policies could be implemented to reinforce these factors. Despite the wide recognition of the importance of technology and knowledge transfer to developing countries in the climate change mitigation policy agenda, this issue has not received sufficient attention in academic research. Current definitions of climate change TT barely take into account the perspective of actors involved in actual climate change TT activities, while respective measurements do not bear in mind the diversity of channels through which these happen and the outputs and effects that they convey. Furthermore, the enabling factors for TT in non-BRIC (Brazil, Russia, India, China) developing countries have been seldom investigated, and policy recommendations to improve the level and quality of TTs to developing countries have not been adapted to the specific needs of highly heterogeneous countries, commonly denominated as “developing countries”. This thesis contributes to enriching the climate change TT debate from the perspective of a smaller emerging economy (Chile) and by undertaking a quantitative analysis of enabling factors for TT in a large sample of developing countries. Two methodological approaches are used to study climate change TT: comparative case study analysis and quantitative analysis. Comparative case studies analyse TT processes in ten cases based in Chile, all of which share the same economic, technological and policy frameworks, thus enabling us to draw conclusions on the enabling factors and obstacles operating in TT processes. The quantitative analysis uses three methodologies – principal component analysis, multiple regression analysis and cluster analysis – to assess the performance of developing countries in a number of enabling factors and the relationship between these factors and indicators of TT, as well as to create groups of developing countries with similar performances. The findings of this thesis are structured to provide responses to four main research questions: What constitutes technology transfer and how does it happen? Is it possible to measure technology transfer, and what are the main challenges in doing so? Which factors enable climate change technology transfer to developing countries? And how do different developing countries perform in these enabling factors, and how can differentiated policy priorities be defined accordingly? vi Resumen Los paises en desarrollo estan experimentando niveles de crecimiento economico sin precedentes. Como consecuencia, se espera que sean responsables de la mayor parte del futuro crecimiento global en demanda energetica y emisiones de Gases de Efecto de Invernadero (GEI). Reducir las emisiones de GEI en los paises en desarrollo es por tanto uno de los pilares de un futuro acuerdo internacional en el marco de la Convencion Marco de las Naciones Unidas para el Cambio Climatico (UNFCCC). La posibilidad de compromisos vinculantes de reduccion de emisiones de GEI ha sido rechazada por los paises en desarrollo, que perciben estos limites como frenos a su desarrollo economico y a su prioridad principal de erradicacion de la pobreza. El desarrollo, transferencia y uso de tecnologias bajas en carbono tiene connotaciones mas positivas y se percibe como la via hacia un crecimiento bajo en carbono. Hasta el momento, la UNFCCC ha tenido un exito limitado en la promocion de transferencias de tecnologia (TT) a paises en desarrollo. Esta tesis analiza las causas de este resultado y busca mejorar la comprension sobre que constituye transferencia de tecnologia en el area de cambio climatico, cuales son los factores que la facilitan en paises en desarrollo y que politicas podrian implementarse para reforzar dichos factores. A pesar del extendido reconocimiento sobre la importancia de la transferencia de tecnologia a paises en desarrollo en la agenda politica de cambio climatico, esta cuestion no ha sido suficientemente atendida por la investigacion existente. Las definiciones actuales de transferencia de tecnologia relacionada con la mitigacion del cambio climatico no tienen en cuenta la diversidad de canales por las que se manifiestan o los efectos que consiguen. Los factores facilitadores de TT en paises en desarrollo no BRIC (Brasil, Rusia, India y China) apenas han sido investigados, y las recomendaciones politicas para aumentar el nivel y la calidad de la TT no se han adaptado a las necesidades especificas de paises muy heterogeneos aglutinados bajo el denominado grupo de "paises en desarrollo". Esta tesis contribuye a enriquecer el debate sobre la TT de cambio climatico con la perspectiva de una economia emergente de pequeno tamano (Chile) y el analisis cuantitativo de factores que facilitan la TT en una amplia muestra de paises en desarrollo. Se utilizan dos metodologias para el estudio de la TT a paises en desarrollo: analisis comparativo de casos de estudio y analisis cuantitativo basado en metodos multivariantes. Los casos de estudio analizan procesos de TT en diez casos basados en Chile, para derivar conclusiones sobre los factores que facilitan u obstaculizan el proceso de transferencia. El analisis cuantitativo multivariante utiliza tres metodologias: regresion multiple, analisis de componentes principales y analisis cluster. Con dichas metodologias se busca analizar el posicionamiento de diversos paises en cuanto a factores que facilitan la TT; las relaciones entre dichos factores e indicadores de transferencia tecnologica; y crear grupos de paises con caracteristicas similares que podrian beneficiarse de politicas similares para la promocion de la transferencia de tecnologia. Los resultados de la tesis se estructuran en torno a cuatro preguntas de investigacion: .Que es la transferencia de tecnologia y como ocurre?; .Es posible medir la transferencia de tecnologias de bajo carbono?; .Que factores facilitan la transferencia de tecnologias de bajo carbono a paises en desarrollo? y .Como se puede agrupar a los paises en desarrollo en funcion de sus necesidades politicas para la promocion de la transferencia de tecnologias de bajo carbono?

How can video analysis help laparoscopic surgeons?

Automatic analysis of minimally invasive surgical (MIS) video has the potential to drive new solutions that alleviate existing needs for safer surgeries: reproducible training programs, objective and transparent assessment systems and navigation tools to assist surgeons and improve patient safety. As an unobtrusive, always available source of information in the operating room (OR), this research proposes the use of surgical video for extracting useful information during surgical operations. Methodology proposed includes tools' tracking algorithm and 3D reconstruction of the surgical field. The motivation for these solutions is the augmentation of the laparoscopic view in order to provide orientation aids, optimal surgical path visualization, or preoperative virtual models overlay

Novel Inductor‐less Conversion Strategy Based on Multiphase Transformer‐Coupled Converters: Analysis, Design and Applications

There are many the requirements that modern power converters should fulfill. Most of the applications where these converters are used, demand smaller converters with high efficiency, improved power density and a fast dynamic response. For instance, loads like microprocessors demand aggressive current steps with very high slew rates (100A/mus and higher); besides, during these load steps, the supply voltage of the microprocessor should be kept within tight limits in order to ensure its correct performance. The accomplishment of these requirements is not an easy task; complex solutions like advanced topologies - such as multiphase converters- as well as advanced control strategies are often needed. Besides, it is also necessary to operate the converter at high switching frequencies and to use capacitors with high capacitance and low ESR. Improving the dynamic response of power converters does not rely only on the control strategy but also the power topology should be suited to enable a fast dynamic response. Moreover, in later years, a fast dynamic response does not only mean accomplishing fast load steps but output voltage steps are gaining importance as well. At least, two applications that require fast voltage changes can be named: Low power microprocessors. In these devices, the voltage supply is changed according to the workload and the operating frequency of the microprocessor is changed at the same time. An important reduction in voltage dependent losses can be achieved with such changes. This technique is known as Dynamic Voltage Scaling (DVS). Another application where important energy savings can be achieved by means of changing the supply voltage are Radio Frequency Power Amplifiers. For example, RF architectures based on ‘Envelope Tracking’ and ‘Envelope Elimination and Restoration’ techniques can take advantage of voltage supply modulation and accomplish important energy savings in the power amplifier. However, in order to achieve these efficiency improvements, a power converter with high efficiency and high enough bandwidth (hundreds of kHz or even tens of MHz) is necessary in order to ensure an adequate supply voltage. The main objective of this Thesis is to improve the dynamic response of DC-DC converters from the point of view of the power topology. And the term dynamic response refers both to the load steps and the voltage steps; it is also interesting to modulate the output voltage of the converter with a specific bandwidth. In order to accomplish this, the question of what is it that limits the dynamic response of power converters should be answered. Analyzing this question leads to the conclusion that the dynamic response is limited by the power topology and specifically, by the filter inductance of the converter which is found in series between the input and the output of the converter. The series inductance is the one that determines the gain of the converter and provides the regulation capability. Although the energy stored in the filter inductance enables the regulation and the capability of filtering the output voltage, it imposes a limitation which is the concern of this Thesis. The series inductance stores energy and prevents the current from changing in a fast way, limiting the slew rate of the current through this inductor. Different solutions are proposed in the literature in order to reduce the limit imposed by the filter inductor. Many publications proposing new topologies and improvements to known topologies can be found in the literature. Also, complex control strategies are proposed with the objective of improving the dynamic response in power converters. In the proposed topologies, the energy stored in the series inductor is reduced; examples of these topologies are Multiphase converters, Buck converter operating at very high frequency or adding a low impedance path in parallel with the series inductance. Control techniques proposed in the literature, focus on adjusting the output voltage as fast as allowed by the power stage; examples of these control techniques are: hysteresis control, V 2 control, and minimum time control. In some of the proposed topologies, a reduction in the value of the series inductance is achieved and with this, the energy stored in this magnetic element is reduced; less stored energy means a faster dynamic response. However, in some cases (as in the high frequency Buck converter), the dynamic response is improved at the cost of worsening the efficiency. In this Thesis, a drastic solution is proposed: to completely eliminate the series inductance of the converter. This is a more radical solution when compared to those proposed in the literature. If the series inductance is eliminated, the regulation capability of the converter is limited which can make it difficult to use the topology in one-converter solutions; however, this topology is suitable for power architectures where the energy conversion is done by more than one converter. When the series inductor is eliminated from the converter, the current slew rate is no longer limited and it can be said that the dynamic response of the converter is independent from the switching frequency. This is the main advantage of eliminating the series inductor. The main objective, is to propose an energy conversion strategy that is done without series inductance. Without series inductance, no energy is stored between the input and the output of the converter and the dynamic response would be instantaneous if all the devices were ideal. If the energy transfer from the input to the output of the converter is done instantaneously when a load step occurs, conceptually it would not be necessary to store energy at the output of the converter (no output capacitor COUT would be needed) and if the input source is ideal, the input capacitor CIN would not be necessary. This last feature (no CIN with ideal VIN) is common to all power converters. However, when the concept is actually implemented, parasitic inductances such as leakage inductance of the transformer and the parasitic inductance of the PCB, cannot be avoided because they are inherent to the implementation of the converter. These parasitic elements do not affect significantly to the proposed concept. In this Thesis, it is proposed to operate the converter without series inductance in order to improve the dynamic response of the converter; however, on the other side, the continuous regulation capability of the converter is lost. It is said continuous because, as it will be explained throughout the Thesis, it is indeed possible to achieve discrete regulation; a converter without filter inductance and without energy stored in the magnetic element, is capable to achieve a limited number of output voltages. The changes between these output voltage levels are achieved in a fast way. The proposed energy conversion strategy is implemented by means of a multiphase converter where the coupling of the phases is done by discrete two-winding transformers instead of coupledinductors since transformers are, ideally, no energy storing elements. This idea is the main contribution of this Thesis. The feasibility of this energy conversion strategy is first analyzed and then verified by simulation and by the implementation of experimental prototypes. Once the strategy is proved valid, different options to implement the magnetic structure are analyzed. Three different discrete transformer arrangements are studied and implemented. A converter based on this energy conversion strategy would be designed with a different approach than the one used to design classic converters since an additional design degree of freedom is available. The switching frequency can be chosen according to the design specifications without penalizing the dynamic response or the efficiency. Low operating frequencies can be chosen in order to favor the efficiency; on the other hand, high operating frequencies (MHz) can be chosen in order to favor the size of the converter. For this reason, a particular design procedure is proposed for the ‘inductorless’ conversion strategy. Finally, applications where the features of the proposed conversion strategy (high efficiency with fast dynamic response) are advantageus, are proposed. For example, in two-stage power architectures where a high efficiency converter is needed as the first stage and there is a second stage that provides the fine regulation. Another example are RF power amplifiers where the voltage is modulated following an envelope reference in order to save power; in this application, a high efficiency converter, capable of achieving fast voltage steps is required. The main contributions of this Thesis are the following: The proposal of a conversion strategy that is done, ideally, without storing energy in the magnetic element. The validation and the implementation of the proposed energy conversion strategy. The study of different magnetic structures based on discrete transformers for the implementation of the proposed energy conversion strategy. To elaborate and validate a design procedure. To identify and validate applications for the proposed energy conversion strategy. It is important to remark that this work is done in collaboration with Intel. The particular features of the proposed conversion strategy enable the possibility of solving the problems related to microprocessor powering in a different way. For example, the high efficiency achieved with the proposed conversion strategy enables it as a good candidate to be used for power conditioning, as a first stage in a two-stage power architecture for powering microprocessors.

Assembling models of embryo development: Image analysis and the construction of digital atlases

Digital atlases of animal development provide a quantitative description of morphogenesis, opening the path toward processes modeling. Prototypic atlases offer a data integration framework where to gather information from cohorts of individuals with phenotypic variability. Relevant information for further theoretical reconstruction includes measurements in time and space for cell behaviors and gene expression. The latter as well as data integration in a prototypic model, rely on image processing strategies. Developing the tools to integrate and analyze biological multidimensional data are highly relevant for assessing chemical toxicity or performing drugs preclinical testing. This article surveys some of the most prominent efforts to assemble these prototypes, categorizes them according to salient criteria and discusses the key questions in the field and the future challenges toward the reconstruction of multiscale dynamics in model organisms.

EVA: Laparoscopic instrument tracking based on endoscopic video analysis for psychomotor skills assessment

INTRODUCTION: The EVA (Endoscopic Video Analysis) tracking system a new tracking system for extracting motions of laparoscopic instruments based on non-obtrusive video tracking was developed. The feasibility of using EVA in laparoscopic settings has been tested in a box trainer setup. METHODS: EVA makes use of an algorithm that employs information of the laparoscopic instrument's shaft edges in the image, the instrument's insertion point, and the camera's optical centre to track the 3D position of the instrument tip. A validation study of EVA comprised a comparison of the measurements achieved with EVA and the TrEndo tracking system. To this end, 42 participants (16 novices, 22 residents, and 4 experts) were asked to perform a peg transfer task in a box trainer. Ten motion-based metrics were used to assess their performance. RESULTS: Construct validation of the EVA has been obtained for seven motion-based metrics. Concurrent validation revealed that there is a strong correlation between the results obtained by EVA and the TrEndo for metrics such as path length (p=0,97), average speed (p=0,94) or economy of volume (p=0,85), proving the viability of EVA. CONCLUSIONS: EVA has been successfully used in the training setup showing potential of endoscopic video analysis to assess laparoscopic psychomotor skills. The results encourage further implementation of video tracking in training setups and in image guided surgery.

Experimental and numerical analysis of reinforced concrete elements subjected to blast loading

El hormigón es uno de los materiales de construcción más empleados en la actualidad debido a sus buenas prestaciones mecánicas, moldeabilidad y economía de obtención, entre otras ventajas. Es bien sabido que tiene una buena resistencia a compresión y una baja resistencia a tracción, por lo que se arma con barras de acero para formar el hormigón armado, material que se ha convertido por méritos propios en la solución constructiva más importante de nuestra época. A pesar de ser un material profusamente utilizado, hay aspectos del comportamiento del hormigón que todavía no son completamente conocidos, como es el caso de su respuesta ante los efectos de una explosión. Este es un campo de especial relevancia, debido a que los eventos, tanto intencionados como accidentales, en los que una estructura se ve sometida a una explosión son, por desgracia, relativamente frecuentes. La solicitación de una estructura ante una explosión se produce por el impacto sobre la misma de la onda de presión generada en la detonación. La aplicación de esta carga sobre la estructura es muy rápida y de muy corta duración. Este tipo de acciones se denominan cargas impulsivas, y pueden ser hasta cuatro órdenes de magnitud más rápidas que las cargas dinámicas impuestas por un terremoto. En consecuencia, no es de extrañar que sus efectos sobre las estructuras y sus materiales sean muy distintos que las que producen las cargas habitualmente consideradas en ingeniería. En la presente tesis doctoral se profundiza en el conocimiento del comportamiento material del hormigón sometido a explosiones. Para ello, es crucial contar con resultados experimentales de estructuras de hormigón sometidas a explosiones. Este tipo de resultados es difícil de encontrar en la literatura científica, ya que estos ensayos han sido tradicionalmente llevados a cabo en el ámbito militar y los resultados obtenidos no son de dominio público. Por otra parte, en las campañas experimentales con explosiones llevadas a cabo por instituciones civiles el elevado coste de acceso a explosivos y a campos de prueba adecuados no permite la realización de ensayos con un elevado número de muestras. Por este motivo, la dispersión experimental no es habitualmente controlada. Sin embargo, en elementos de hormigón armado sometidos a explosiones, la dispersión experimental es muy acusada, en primer lugar, por la propia heterogeneidad del hormigón, y en segundo, por la dificultad inherente a la realización de ensayos con explosiones, por motivos tales como dificultades en las condiciones de contorno, variabilidad del explosivo, o incluso cambios en las condiciones atmosféricas. Para paliar estos inconvenientes, en esta tesis doctoral se ha diseñado un novedoso dispositivo que permite ensayar hasta cuatro losas de hormigón bajo la misma detonación, lo que además de proporcionar un número de muestras estadísticamente representativo, supone un importante ahorro de costes. Con este dispositivo se han ensayado 28 losas de hormigón, tanto armadas como en masa, de dos dosificaciones distintas. Pero además de contar con datos experimentales, también es importante disponer de herramientas de cálculo para el análisis y diseño de estructuras sometidas a explosiones. Aunque existen diversos métodos analíticos, hoy por hoy las técnicas de simulación numérica suponen la alternativa más avanzada y versátil para el cálculo de elementos estructurales sometidos a cargas impulsivas. Sin embargo, para obtener resultados fiables es crucial contar con modelos constitutivos de material que tengan en cuenta los parámetros que gobiernan el comportamiento para el caso de carga en estudio. En este sentido, cabe destacar que la mayoría de los modelos constitutivos desarrollados para el hormigón a altas velocidades de deformación proceden del ámbito balístico, donde dominan las grandes tensiones de compresión en el entorno local de la zona afectada por el impacto. En el caso de los elementos de hormigón sometidos a explosiones, las tensiones de compresión son mucho más moderadas, siendo las tensiones de tracción generalmente las causantes de la rotura del material. En esta tesis doctoral se analiza la validez de algunos de los modelos disponibles, confirmando que los parámetros que gobiernan el fallo de las losas de hormigón armado ante explosiones son la resistencia a tracción y su ablandamiento tras rotura. En base a los resultados anteriores se ha desarrollado un modelo constitutivo para el hormigón ante altas velocidades de deformación, que sólo tiene en cuenta la rotura por tracción. Este modelo parte del de fisura cohesiva embebida con discontinuidad fuerte, desarrollado por Planas y Sancho, que ha demostrado su capacidad en la predicción de la rotura a tracción de elementos de hormigón en masa. El modelo ha sido modificado para su implementación en el programa comercial de integración explícita LS-DYNA, utilizando elementos finitos hexaédricos e incorporando la dependencia de la velocidad de deformación para permitir su utilización en el ámbito dinámico. El modelo es estrictamente local y no requiere de remallado ni conocer previamente la trayectoria de la fisura. Este modelo constitutivo ha sido utilizado para simular dos campañas experimentales, probando la hipótesis de que el fallo de elementos de hormigón ante explosiones está gobernado por el comportamiento a tracción, siendo de especial relevancia el ablandamiento del hormigón. Concrete is nowadays one of the most widely used building materials because of its good mechanical properties, moldability and production economy, among other advantages. As it is known, it has high compressive and low tensile strengths and for this reason it is reinforced with steel bars to form reinforced concrete, a material that has become the most important constructive solution of our time. Despite being such a widely used material, there are some aspects of concrete performance that are not yet fully understood, as it is the case of its response to the effects of an explosion. This is a topic of particular relevance because the events, both intentional and accidental, in which a structure is subjected to an explosion are, unfortunately, relatively common. The loading of a structure due to an explosive event occurs due to the impact of the pressure shock wave generated in the detonation. The application of this load on the structure is very fast and of very short duration. Such actions are called impulsive loads, and can be up to four orders of magnitude faster than the dynamic loads imposed by an earthquake. Consequently, it is not surprising that their effects on structures and materials are very different than those that cause the loads usually considered in engineering. This thesis broadens the knowledge about the material behavior of concrete subjected to explosions. To that end, it is crucial to have experimental results of concrete structures subjected to explosions. These types of results are difficult to find in the scientific literature, as these tests have traditionally been carried out by armies of different countries and the results obtained are classified. Moreover, in experimental campaigns with explosives conducted by civil institutions the high cost of accessing explosives and the lack of proper test fields does not allow for the testing of a large number of samples. For this reason, the experimental scatter is usually not controlled. However, in reinforced concrete elements subjected to explosions the experimental dispersion is very pronounced. First, due to the heterogeneity of concrete, and secondly, because of the difficulty inherent to testing with explosions, for reasons such as difficulties in the boundary conditions, variability of the explosive, or even atmospheric changes. To overcome these drawbacks, in this thesis we have designed a novel device that allows for testing up to four concrete slabs under the same detonation, which apart from providing a statistically representative number of samples, represents a significant saving in costs. A number of 28 slabs were tested using this device. The slabs were both reinforced and plain concrete, and two different concrete mixes were used. Besides having experimental data, it is also important to have computational tools for the analysis and design of structures subjected to explosions. Despite the existence of several analytical methods, numerical simulation techniques nowadays represent the most advanced and versatile alternative for the assessment of structural elements subjected to impulsive loading. However, to obtain reliable results it is crucial to have material constitutive models that take into account the parameters that govern the behavior for the load case under study. In this regard it is noteworthy that most of the developed constitutive models for concrete at high strain rates arise from the ballistic field, dominated by large compressive stresses in the local environment of the area affected by the impact. In the case of concrete elements subjected to an explosion, the compressive stresses are much more moderate, while tensile stresses usually cause material failure. This thesis discusses the validity of some of the available models, confirming that the parameters governing the failure of reinforced concrete slabs subjected to blast are the tensile strength and softening behaviour after failure. Based on these results we have developed a constitutive model for concrete at high strain rates, which only takes into account the ultimate tensile strength. This model is based on the embedded Cohesive Crack Model with Strong Discontinuity Approach developed by Planas and Sancho, which has proved its ability in predicting the tensile fracture of plain concrete elements. The model has been modified for its implementation in the commercial explicit integration program LS-DYNA, using hexahedral finite elements and incorporating the dependence of the strain rate, to allow for its use in dynamic domain. The model is strictly local and does not require remeshing nor prior knowledge of the crack path. This constitutive model has been used to simulate two experimental campaigns, confirming the hypothesis that the failure of concrete elements subjected to explosions is governed by their tensile response, being of particular relevance the softening behavior of concrete.

Analysis of the operator action and the single failure criteria in a SGTR sequence using best estimate assumptions with TRACE 5.0

Steam Generator Tube Rupture (SGTR) sequences in Pressurized Water Reactors are known to be one of the most demanding transients for the operating crew. SGTR are a special kind of transient as they could lead to radiological releases without core damage or containment failure, as they can constitute a direct path from the reactor coolant system to the environment. The first methodology used to perform the Deterministic Safety Analysis (DSA) of a SGTR did not credit the operator action for the first 30 min of the transient, assuming that the operating crew was able to stop the primary to secondary leakage within that period of time. However, the different real SGTR accident cases happened in the USA and over the world demonstrated that the operators usually take more than 30 min to stop the leakage in actual sequences. Some methodologies were raised to overcome that fact, considering operator actions from the beginning of the transient, as it is done in Probabilistic Safety Analysis. This paper presents the results of comparing different assumptions regarding the single failure criteria and the operator action taken from the most common methodologies included in the different Deterministic Safety Analysis. One single failure criteria that has not been analysed previously in the literature is proposed and analysed in this paper too. The comparison is done with a PWR Westinghouse three loop model in TRACE code (Almaraz NPP) with best estimate assumptions but including deterministic hypothesis such as single failure criteria or loss of offsite power. The behaviour of the reactor is quite diverse depending on the different assumptions made regarding the operator actions. On the other hand, although there are high conservatisms included in the hypothesis, as the single failure criteria, all the results are quite far from the regulatory limits. In addition, some improvements to the Emergency Operating Procedures to minimize the offsite release from the damaged SG in case of a SGTR are outlined taking into account the offsite dose sensitivity results.

Controlled time of arrival feasibility analysis

Previous research studies and operational trials have shown that using the airborne Required Time of Arrival (RTA) function, an aircraft can individually achieve an assigned time to a metering or merge point accurately. This study goes a step further and investigates the application of RTA to a real sequence of arriving aircraft into Melbourne Australia. Assuming that the actual arrival times were Controlled Time of Arrivals (CTAs) assigned to each aircraft, the study examines if the airborne RTA solution would work. Three scenarios were compared: a baseline scenario being the actual flown trajectories in a two hour time-span into Melbourne, a scenario in which the sequential landing slot times of the baseline scenario were assigned as CTAs and a third scenario in which the landing slots could be freely redistributed to the inbound traffic as CTAs. The research found that pressure on the terminal area would sometimes require aircraft to lose more time than possible through the RTA capability. Using linear holding as an additional measure to absorb extensive delays, up to 500NM (5%) of total track reduction and 1300kg (3%) of total fuel consumption could be saved in the scenario with landing slots freely distributed as CTAs, compared to the baseline scenario. Assigning CTAs in an arrival sequence requires the ground system to have an accurate trajectory predictor to propose additional delay measures (path stretching, linear holding) if necessary. Reducing the achievable time window of the aircraft to add control margin to the RTA function, had a negative impact and increased the amount of intervention other than speed control required to solve the sequence. It was concluded that the RTA capability is not a complete solution but merely a tool to assist in managing the increasing complexity of air traffic.

A Spectral Analysis of LDA Turbulent Flow Measurements in a Ship Air Wake

Helicopters are one of the most important tactical elements in maritime operations. The necessity for an improvement in the conditions in which the landing and take-off operations are carried out leads to the study of the flow that separates from the ship?s superstructure over the flight deck. To investigate this flow a series of wind tunnel experiments have been performed by testing a sub-scale model of a generic frigate. Measurements of the flow?s velocity have been taken by means of Laser Doppler Anemometry (LDA) in five points that simulate the last path of the landing trajectory. The data obtained in these experiments is manipulated in a frequency analysis where the corresponding spectra are calculated. Onboard measurements from an actual full scale frigate are analyzed and compared with the wind tunnel results. Conclusions obtained consist of a series of illustrative values of turbulent energy frequency ranges which can be valuable for any study in this field. The comparison shows a clear similarity between both experiments, reasserting the wind tunnel measurements and its reliability.

Deep level analysis of homoepitaxial ZnO doped with N

High intrinsic carrier concentration (n-type) • Efforts to reduce this effect: • Homoepitaxy1 • Non-polar orientations • Similar samples exhibit residual doping as low as ~1014 cm-3 (2) The path to p-type doping • Many dopants proposed • N is a promising candidate • Simple NO is a deep level • Complex levels have shallower energies • N-related levels observed near the VB by many groups • Energies between 130 meV and 160 meV from VBM