Woolliness assessment in peaches. Comparison between human and instrumental procedures and results

Woolliness, a negative attribute of sensory texture, is characterised by the lack of juiciness without variation of the tissue water content an incapacity of ripening although there is external ripe appearance. In this study, peaches cv Springcrest (early and soft flesh peaches) and Miraflores (late and hard flesh peaches) corresponding to three different maturity stages at harvest, stored 0, 1, 2, 3 and 4 weeks at 1 and 5°C have been tested by instrumental and sensory means. A Instrumental classification of woolliness has been compared to the sensory assessment. For Springcrest peaches the sensory results match with those found for the instrumental procedure. In this case , Woolliness appears after 2 weeks of storage at 5°C, changing abruptly from crispy to woolly. Miraflores peaches did not develop woolliness during storage. After comparing with sensory results, it is shown that a common instrumental scale may be appropriate to classify for woolliness all peach varieties.

Combination of optical and on-destructivemechanicaltechniques for the measurement of maturity in peach

Increasing consumer dissatisfaction related with lack of ripeness in peach has been repeatedly reported since 1990 to the present day. There is thus, a great interest in improving the assessment of peach maturity, currently based on Magness Taylor firmness (destructive, highly variable, and time consuming) and colour (not reliable for highly coloured varieties). The present research studies as an alternative several non-destructive (ND) measurements, based on multispectral imaging, visible spectra, and low mass impact response. Their relationship with maturity, as well as the potential of their combination was studied. As a result, two rather independent (R2 = 0.3) groups of non-destructive measurements, chlorophyll related optical indexes and low mass impact (LMI) measurements, were identified. Optical measurements showed the best behaviour for assessing maturity at harvest, while LMI measurements reflected handling incidences, showing a promising potential to be used to control transport and postharvest handling.

Determination of the uptake and translocation of nitrogen applied at different growth stages of a melon crop (Cucumis melo L.) using 15N isotope.

In order to establish a rational nitrogen (N) fertilisation and reduce groundwater contamination, a clearer understanding of the N distribution through the growing season and its dynamics inside the plant is crucial. In two successive years, a melon crop (Cucumis melo L. cv. Sancho) was grown under field conditions to determine the uptake of N fertiliser, applied by means of fertigation at different stages of plant growth, and to follow the translocation of N in the plant using 15N-labelled N. In 2006, two experiments were carried out. In the first experiment, labelled 15N fertiliser was supplied at the female-bloom stage and in the second, at the end of fruit ripening. Labelled 15N fertiliser was made from 15NH415NO3 (10 at.% 15N) and 9.6 kg N ha−1 were applied in each experiment over 6 days (1.6 kg N ha−1 d−1). In 2007, the 15N treatment consisted of applying 20.4 kg N ha−1 as 15NH415NO3 (10 at.% 15N) in the middle of fruit growth, over 6 days (3.4 kg N ha−1 d−1). In addition, 93 and 95 kg N ha−1 were supplied daily by fertigation as ammonium nitrate in 2006 and 2007, respectively. The results obtained in 2006 suggest that the uptake of N derived from labelled fertiliser by the above-ground parts of the plants was not affected by the time of fertiliser application. At the female-flowering and fruit-ripening stages, the N content derived from 15N-labelled fertiliser was close to 0.435 g m−2 (about 45% of the N applied), while in the middle of fruit growth it was 1.45 g m−2 (71% of the N applied). The N application time affected the amount of N derived from labelled fertiliser that was translocated to the fruits. When the N was supplied later, the N translocation was lower, ranging between 54% at female flowering and 32% at the end of fruit ripening. Approximately 85% of the N translocated came from the leaf when the N was applied at female flowering or in the middle of fruit growth. This value decreased to 72% when the 15N application was at the end of fruit ripening. The ammonium nitrate became available to the plant between 2 and 2.5 weeks after its application. Although the leaf N uptake varied during the crop cycle, the N absorption rate in the whole plant was linear, suggesting that the melon crop could be fertilised with constant daily N amounts until 2–3 weeks before the last harvest.

Changes in the Papez Circuit in early stages of Alzheimer's Disease

Alzheimer's disease (AD) is the most common cause of demenMa. Neuronal and synapMc losses occur iniMally and predominantly in the medial temporal lobe structures including hippocampus, amygdala and thalamus, structures that belong to the Papez circuit. The integrity of the connecMons amongst them is essenMal for episodic memory, which is specifically impaired in AD. For this reason we have invesMgated the degeneraMon paRern of subcorMcal structures and its relaMon to early stages of AD, i.e. Mild CogniMve Impairment (MCI), both in the amnesic and mulMdomain types using structural magneMc resonance imaging (using a 3T GE scanner) and VBM‐DARTEL.

Bruise Development and Fruit Response of Pear (cv.'Blanquilla') under Impact Conditions

Pear fruits cv. 'Blanquilla', at various ripening stages, were studied under impact conditions. A 50-6-g spherical steel indentator, with a radius of curvature of 0-94 cm, was dropped on to the fruit from three heights: 4, 6 and 10 cm (0-0199, 0-0299 and 0-0499 J). The variables measured were analyzed. All variables were observed to be related to the impact energy except impact duration, which was related to the fruit firmness. Bruising correlated with impact energy when considering different heights, but not with any specific variable when studying the impact phenomenon at individual heights; however, there was a clear correlation between impact bruising and firmness. Three bruise shapes were observed, corresponding to preclimacteric, climacteric and postclimacteric fruits; a theory for this response is offered. According to the results, the impact response in postclimacteric pear fruits (with firmness values of less than 25 N, and a maturity index above 55) may be explained by the role played by the skin rather than by the pulp.

Arquitectura moderna en Chile a través de la obra de TAU arquitectos, 1954 – 1971

En la década del sesenta en Chile existió una de las oficinas más importantes en el panorama arquitectónico nacional de todo el siglo XX. Sin embargo, su obra no ha llegado a ser lo suficientemente conocida debido a diferentes razones históricas, políticas y gremiales. Esta oficina desarrolló su labor en un período político de consolidación democrática, pero de graves dificultades económicas debido a problemas estructurales, por lo cual, el Estado debió intervenir para llevar adelante los planes de progreso y desarrollo del país. El objetivo del presente trabajo es poner en valor la obra de esta oficina, denominada TAU arquitectos, compuesta por profesionales que desde su juventud presentaron un gran compromiso con la realidad social y un enorme fervor por la arquitectura. Se trata del primer estudio sistemático de la trayectoria de este equipo de profesionales, titulados en la Facultad de Arquitectura de la Universidad de Chile, en los años cincuenta. El análisis sigue un desarrollo de lo general a lo particular, donde en primer término se esboza el ambiente histórico en que se originó la oficina, para luego estudiar aquellos aspectos que influyeron en su etapa formativa, finalizando con el análisis de sus obras en detalle. El estudio de éstas se realiza en orden cronológico, distinguiendo etapas de consolidación y madurez durante el transcurso de su labor disciplinar. La tesis pone de manifiesto que la producción arquitectónica de esta oficina, fue el reflejo de la utilización de una metodología de trabajo que integraba aspectos de la nueva arquitectura con las técnicas locales, por lo cual presenta ciertas condiciones regionalistas y resalta las características y cualidades propias del lugar. Paralelamente, evidencia que la obra de este equipo respondía al sistema productivo del país, atendiendo a las posibilidades constructivas y al saber profesional de esa época. Al mismo tiempo, la tesis intenta develar las raíces y fundamentos que están implícitas en el diseño de la forma arquitectónica, estudiando las condiciones de la lógica estructural y su resistencia antisísmica, resaltando aspectos como la articulación del espacio colectivo, el sutil manejo del programa, la relación con el lugar y la interesante expresión de los materiales. ABSTRACT In Chile, during the decade of the 60´s, there existed one of the most important offices in the national architectural scene of the 20th century. However, their work is not sufficiently known due to different historical, political and trade reasons. This Office developed their work during a political period of democratic consolidation, with serious economic difficulties due to structural problems; therefore, the State had to intervene to take forward the plans for the country’s progress and development. The objective of the essay is to value the work of this Office, called TAU arquitectos, who since their youth showed a great commitment to the social reality and a huge fervor for architecture. This is the first systematic study of the trajectory of this team of professionals, whom graduated in the 1950´s in the University of Chile in the Faculty of Architecture. The analysis follows a general development to the specific details, where at first, the historic atmosphere of the office is defined and then to study the aspects that influenced the formative stage of the architects and to finalize, with a detailed analysis of their work. The study of these is performed in a chronological order, distinguishing the stages of consolidation and maturity, during the course of their disciplined commitment. The thesis shows that the architectural production of TAU was the reflection of the use of a methodology that incorporated aspects of the new architecture with local techniques, which presents certain regional conditions and therefore highlights the characteristics and qualities of the place. In Parallel, proving that the work of this team, responded to the production system of the country, according to the constructive possibilities and the professional knowledge of that time. At the same time, the thesis tries to unveil the roots and fundamentals that are implicit in the design of the architectural form, studying the conditions of a structural logic and its seismic resistance; highlighting aspects such as articulation of the collective space, the subtle handling of the program, the relationship with the place and the interesting expression of materials.

Storabelity of melon for different ripeness stages at harvest. Selection of instrumental procedures for quality assessment.

The consumption of melon (Cucumis melo L.) has been, until several years ago, regional, seasonal and without commercial interest. Recent commercial changes and world wide transportation have changed this situation. Melons from 3 different ripeness stages at harvest and 7 cold storage periods have been analysed by destructive and non destructive tests. Chemical, physical, mechanical (non destructive impact, compression, skin puncture and Magness- Taylor) and sensory tests were carried out in order to select the best test to assess quality and to determine the optimal ripeness stage at harvest. Analysis of variance and Principal Component Analysis were performed to study the data. The mechanical properties based on non-destructive Impact and Compression can be used to monitor cold storage evolution. They can also be used at harvest to segregate the highest ripeness stage (41 days after anthesis DAA) in relation to less ripe stages (34 and 28 DAA).Only 34 and 41 DAA reach a sensory evaluation above 50 in a scale from 0-100.

Importance of canopy porosity into vineyard and the relationship with the grape maturity. Digital estimation method

In warm and dry climates, the use of porous systems should be required in order to allow a better leaf distribution inside the plant, causing more space in the clusters area and enhancing determined physiological processes so in the leaf (photosynthesis, v entilation, transpiration) as in berry (growth and maturation). Plant geometry indexes, yield and must composition have been studied in three different systems: sprawl with 12 shoots/m (S1); sprawl system with 18 shoots/m (S2) and vertical positioned syste m or VSP with 12 shoots/m (VSP1). Total leaf area increases as the crop load does, whoever surface area depends on to two factors: crop load and the training system (VSP vs. sprawl), which can provide differences in leaf exposure efficiencies. The main objective of this study was to validate digital photography measurements used to compare porosity differences among treatments and, as they affect plant microclimate and, therefore, yield and berry quality. Also, all previous studied indexes (LAI, SA, SFEr) tended to overestimate the relationship between exposed leaf surface and porosity of each treatment, but the use of digital method proved to be an effective tool in order to assess canopy porosity. Results showed that not positioned and free systems (sprawl) scored between 25- 50% more porosity in the clusters area than the fixed vertical system (VSP), which resulted in a better plant microclimate for test conditions, mainly by improving the exposure of internal clusters and internal canopy ventilation. On the other hand, higher crop load treatment (S2) showed a real increase in yield (16%) without any relevant change into must composition, even improving total anthocyanin content into berry during ripening

Importance of canopy porosity into vineyard and the relationship with the grape maturity. Digital estimation method

In warm and dry climates, the use of porous systems should be required in order to allow a better leaf distribution inside the plant, causing more space in the clusters area and enhancing determined physiological processes so in the leaf (photosynthesis, ventilation, transpiration) as in berry (growth and maturation). Plant geometry indexes, yield and must composition have been studied in three different systems: sprawl with 12 shoots/m (S1); sprawl system with 18 shoots/m (S2) and vertical positioned system or VSP with 12 shoots/m (VSP1). Total leaf area increases as the crop load does, whoever surface area depends on to two factors: crop load and the training system (VSP vs . sprawl), which can provide differences in leaf exposure efficiencies. The main objective of this study was to validate digital photography measurements used to compare porosity differences among treatments and, as they affect plant microclimate and, therefore, yield and berry quality. Also, all previous studied indexes (LAI, SA, SFEr) tended to overestimate the relationship between exposed leaf surface and porosity of each treatment, but the use of digital method proved to be an effective tool in order to assess canopy porosity. Results showed that not positioned and free systems (sprawl) scored between 25 - 50% more porosity in the clusters area than the fixed vertical system (VSP), which resulted in a better plant microclimate for test conditions, mainly by improving the exposure of internal clusters and internal canopy ventilation. On the other hand, higher crop load treatment (S2) showed a real increase in yield (16%) without any relevant change into must composition, even improving total anthocyanin content into berry during ripening

Iron distribution through the developmental stages of Medicago truncatula nodules.

Paramount to symbiotic nitrogen fixation (SNF) is the synthesis of a number of metalloenzymes that use iron as a critical component of their catalytical core. Since this process is carried out by endosymbiotic rhizobia living in legume root nodules, the mechanisms involved in iron delivery to the rhizobia-containing cells are critical for SNF. In order to gain insight into iron transport to the nodule, we have used synchrotron-based X-ray fluorescence to determine the spatio-temporal distribution of this metal in nodules of the legume Medicago truncatula with hitherto unattained sensitivity and resolution. The data support a model in which iron is released from the vasculature into the apoplast of the infection/differentiation zone of the nodule (zone II). The infected cell subsequently takes up this apoplastic iron and delivers it to the symbiosome and the secretory system to synthesize ferroproteins. Upon senescence, iron is relocated to the vasculature to be reused by the shoot. These observations highlight the important role of yet to be discovered metal transporters in iron compartmentalization in the nodule and in the recovery of an essential and scarce nutrient for flowering and seed production.

Effects of irrigation and time of application on the yield and quality of cv. Cabernet sauvignon in a warm climate

Mediterranean climate is characterized by hot summer, high evapotranspiration rates, and scarce precipitations (400 mm per year) during grapevine cycle. These extremely dry conditions affect vineyard productivity and sustainability. Supplementary irrigation is a needed practice in order to maintain yield and quality. Almost all Spanish grape growing regions are characterized by these within this context, especially in the center region, where this study was performed. The main objective of this work was to study the influence of irrigation on yield and quality. For this aim, we applied different levels of irrigation (mm of water applied) during different stages of growth and berry maturity. Four experimental treatments were applied considering the amount of water and the moment of the application: T1: Water irrigation (420 mm) applied from bloom to maturity. T2: Corresponded to the traditional irrigation scheduling, from preveraison to maturity (154 mm). T3: Water irrigation from bloom to preveraison, and water deficit from veraison to maturity (312 mm). T4: Irrigation applied from preveraison to maturity (230 mm) Experimental vineyard, cv. Cabernet Sauvignon, was located in a commercial vineyard (Bodegas Licinia S.L.) in the hot region of Morata de Tajuña (Madrid). The trial was performed during 2010 and 2011 seasons. Our results showed that yield increased from 2010 to 2011 in the treatments with a higher amount of water appli ed, T1 and T3 (24 and 10 % of yield increase respectively). This was mainly due to an increase in bud fertility (nº of bunches per shoot). Furthermore, sugar content was higher in T3 (27.3 ºBrix), followed by T2 (27 ºBrix). By contrast, T4 (irrigation from veraison) presented the lowest solid soluble concentration and the highest acidity. These results suggest that grapevine has an intrinsic capacity to adapt to its environment. However, this adaptation capacity should be evaluated considering the sensibility of quality parameters during the maturity period (acidity, pH, aroma, color...) and its impact on yield. Here, we demonstrated that a higher amount of water irrigation applied was no linked to a negative effect on quality.

Multiple removal of spent rocket upper stages with an ion beam shepherd

Among the many advantages of the recently proposed ion beam shepherd (IBS) debris removal technique is the capability to deal with multiple targets in a single mission. A preliminary analysis is here conducted in order to estimate the cost in terms of spacecraft mass and total mission time to remove multiple large-size upper stages of the Zenit family. Zenit-2 upper stages are clustered at 71 degrees inclination around 850 km altitude in low Earth orbit. It is found that a removal of two targets per year is feasible with a modest size spacecraft. The most favorable combinations of targets are outlined.

Estudio de los efectos en el viñedo de la modificación del déficit hídrico continuo en los periodos anterior y posterior al envero (cv. Cabernet Sauvignon; Vitis vinifera L.)

En regiones semiáridas, con veranos cálidos, evapotranspiraciones elevadas, humedades relativas bajas, además de precipitaciones intermitentes y escasas (400 mm al año) que reducen la recarga del perfil en invierno, se puede ver afectada la productividad y sostenibilidad de los viñedos. Por eso en estas zonas puede ser necesario utilizar el riego suplementario para mantener la calidad y aumentar la productividad. En este marco de circunstancias es en el que se desarrolla la mayoría de la viticultura española, y en concreto en la zona centro donde se realizó el estudio. Con este trabajo se pretende estudiar la influencia del agua del riego, con distintas dosis y aplicada en diferentes fases de crecimiento y maduración de la baya, en la producción y calidad de la uva. Se estudió la influencia del déficit moderado continuo aplicado antes y después de envero, en el aprovechamiento de los recursos ambientales y en la respuesta del cv. Cabernet Sauvignon. El ensayo se desarrolló en 2010 y 2011 en la finca “La Alcoholera”, perteneciente a bodegas LICINIA S.L., ubicada en la localidad de Chinchón, Comunidad de Madrid, España. Durante 2010 y 2011 se realizaron estudios en cepas del cv. Cabernet Sauvignon (clon 15), injertadas sobre 41B y plantadas en 2005. Con poda corta en Cordón Royat unilateral de 80 cm de altura, y cuya vegetación alcanzó una altura de 97 cm. Las cepas del ensayo fueron conducidas verticalmente en espaldera (VSP), con 10 yemas por metro lineal. Las plantas dentro de la fila fueron separadas 1 m y la distancia de la calle fue de 3 m. La orientación de las filas norte – sur. Se plantearon cuatro tratamientos experimentales con diferentes dosis y momento de aplicación del riego. - T: Testigo. Déficit ligero, con un aporte continuado de agua desde floración (420 mm). - DMc: Déficit moderado continuo. Manejo del riego convencional, empezando en pre-envero (154 mm) - DM1: Déficit moderado a partir de pre-envero. Aporte de riego continuado desde floración reduciéndose la dosis de riego en pre-envero (312 mm). - DM2: Déficit moderado hasta pre-envero. Se empezó a regar a partir de preenvero (230 mm). Se observó que bajo condiciones de estrés hídrico leve, el crecimiento se reduce disminuyendo la migración de fotoasimilados hacia los órganos vegetativos. Generando menor área foliar en las plantas sometidas a déficit hídrico moderado entre floración y cuajado. Disminuyendo su consumo. En maduración la humedad del suelo dependió principalmente del riego aplicado y del consumo de la planta; dicho consumo dependió a la vez del desarrollo foliar del canopy y de la necesidad hídrica de la vid. El aumento del déficit hídrico disminuyó el contenido de agua en el suelo, lo que provocó diferencias en el estado hídrico y en el intercambio gaseoso de las hojas. En condiciones de déficit moderado, la fotosíntesis se encontró altamente correlacionada con el potencial hídrico foliar medido a mediodía solar. Además en condiciones de déficit moderado continuo la disponibilidad hídrica, la demanda atmosférica y el nivel de hidratación de las hojas, interaccionaron de forma compleja en la regulación estomática de las hojas, condicionando el intercambio gaseoso y la eficiencia en el uso del agua. Al aumentar el volumen de agua aplicado el peso de madera de poda por metro de fila fue superior. Las diferencias encontradas en el rendimiento fueron debidas a las diferencias en el peso de baya. El cual estuvo condicionado por la estrategia de riego, ya que, el déficit hídrico moderado antes de envero fue más crítico para el rendimiento que el déficit impuesto durante la madurez. Por otro lado, la biomasa dependió de la actividad fisiológica de la planta, la cual fue altamente dependiente de la disponibilidad hídrica. Déficit hídrico moderado aplicado de cuajado a envero, generó bayas más pequeñas y aumentó la relación hollejo:pulpa. El déficit moderado aplicado después de envero favoreció la acumulación de IPT y antocianos extraíbles, mejorando la calidad de la uva, pero disminuyó la acidez de la baya. El riego aplicado de envero a vendimia desaceleró la concentración de azúcares en bayas que fueron sometidas a déficit antes de pre-envero. ABSTRACT Mediterranean climate is characterized by hot summers, high evapotranspiration rates, and scarce precipitations (400 mm per year) during grapevine cycle. These extremely dry conditions affect vineyard productivity and sustainability. Supplementary irrigation is needed practice in order to maintain yield and quality. Almost all Spanish grape growing regions are characterized by these conditions, especially in the center region, where this trial was performed. The main objective of this work is to study the influence of water irrigation on yield and quality. For this aim, different levels of irrigation (mm of water applied) were applied during different stages of growth and berry maturity of Caberent Sauvignon grapevines. The work was conducted from 2010 to 2011 and located in Licinia (40º 12´ N, 3º 28´ W), Madrid, Spain. The cultivar utilized was Cabernet Sauvignon, clone 15 grafted onto rootstock 41B, planted in 2005. The vineyard was oriented north-south, with spacing on 3 meters between rows and 1 meter between plants. Vines were spurpruned to 10 buds per meter and trained in unilateral cordon with a height of 80 cm. Shoots were positioned vertically (VSP). Considering the amount of water and the moment of the application, four experimental treatments were applied: - T: Control sample. Slight deficit (420 mm) applied from bloom to maturity. - DMc: Continuous moderate deficit. Traditional irrigation: application of 154 mm of water from pre-veraison to maturity. - DM1: Deficit moderate from pre-veraison. Irrigation of 312 mm of water from bloom to pre-veraison. - DM2: Deficit moderate to pre-veraison. Irrigation of 230 mm of water from preveraison to maturity Under moderated water stress conditions it was seen than leaf growth decreases due to the reduction of migration of photo-assimilates to vegetative organs. Vines with moderate water deficit between flowering and ripening develop less leaf area and decrease its water consumption. During maturation of berries, soil moisture depends on irrigation and plant consumption. This consumption further depends on vegetation development and on the vine needs for water. By increasing water deficit, the water content in the soil decreases. This causes differences in leaf water status and in the gases exchange. Under moderate deficit conditions, photosynthesis was found highly correlated with midday leaf water potential. Further, atmospheric demand and the level of leaves hydration interact in complex ways in the stomatal regulation, which affects leaf gas exchange and the efficiency of water use. The amount of water applied is directly proportional to pruning weight. Changes in berry weight cause differences in yield ratios. The differences in berry weights are conditioned by the irrigation strategy, the moderate water deficit before veraison influences more than the deficit applied from veraison. Biomass generated for the plant depends on its physiological activity, which is highly related to the water availability. Moderate water deficit applied from fruit set to ripening generates smaller berries, increasing the pulp/skin ratio. Moderate deficit applied after veraison promotes the accumulation of extractables anthocyans and TPI. Despite this treatment improves color parameters of the grapes, it decreases its total acidity. Irrigation applied from veraison to harvest slows down sugar accumulation in berries compared to those under deficit before veraison conditions.

Effect of cage type on the behaviour pattern of rabbit does at different physiological stages

Interest in commercially farmed rabbit welfare has increased in recent years. As a result, new alternative housing systems have been developed, although they require evaluation in order to demonstrate their potential for improving welfare. The aim of this trial was to study the behavioural traits of rabbit does housed in 2 different types of cage (TC): conventional vs. alternative with an elevated platform, at different physiological stages (PS); lactation and gestation. Behavioural observations were carried out on 12 rabbit commercial does using continuous 24 h video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (on av. 57.7%). However, due to the use of platforms (on av. 23.0% of time), lactating does spent 36.6% less time on foot mats (P<0.001) and gestating does spent 27.0% less time on wire mesh (P<0.001) in alternative cages than in conventional cages. Alternative cages allowed for standing posture, but this behaviour was only observed in gestating does (on av. 4.6 times a day). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Doe behaviour was influenced by the time of day, with less activity during the midday hours. During dark hours, rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, regardless of their physiological stage, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kits trying to suckle. Use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. The absence of stereotypies in rabbit does of this trial, suggested that animal welfare was not compromised by the type of housing (conventional or alternative cages).

Extralimital Senegalese species during Marine Isotope Stages 5.5 and 11 in the Canary Islands (29° N): Sea surface temperature estimates

The presence of Harpa doris Röding, 1798 in marine deposits of the last interglacial period, ~130-120 ka (marine isotope stage or MIS 5.5) in the Canary Islands (Gran Canaria, Lanzarote and Fuerteventura) enabled us to compare this occurrence with its present habitat in the Gulf of Guinea and the Cape Verde Islands, well to the south. This comparison leads to the conclusion that sea surface temperatures (SSTs) in the waters around the Canary Islands during the last interglacial period were at least 3.3 °C higher than today. H. doris is found in association with the large gastropod Persististrombus latus (Gmelin, 1791) as well as the coral Siderastrea radians (Pallas, 1766). The presence of these extralimital southern,warm-water species in the Canary Islands during the last interglacial period also implies a northward expansion of plankton-feeding larvae in seawater with a high chlorophyll-a content. Such conditionswould require a shortening of the southern arm of the cool Canary Current that dominates the waters around the Canary Islands at present. Marine deposits dating to ~400 ka (MIS 11) are also found on the Canary Islands. In these deposits, the presence of Saccostrea cucullata (Born, 1778) allows a comparison with its present habitat in the Gulf of Guinea. In this analysis, we conclude that SSTs in waters around the Canary Islands during this major interglacial period were at least 4.2 °C higher than today. Middle Pleistocene fossils of S. cucullata have also been found in the western Mediterranean Sea and Morocco, as well as the Cape Verde Islands. If these deposits also date to MIS 11, SST warming could have been a regional phenomenon, including much of the eastern Atlantic Ocean and Mediterranean Sea.