Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

An extended approach for service innovation study: an empirical research

Initially, service sector was defined as complementary to manufacturing sector. This situation has changed in recent times; services growth has resulted in a dominance of employment and economic activity in most developed nations and is becoming a key process for the competitiveness of their industrial sectors. New services related to commodities have become a strategy to differentiate their value proposition (Robinson et al., 2002). The service sector's importance is evident when evaluating its share in the gross domestic product. According to the World Bank (2011), in 2009, 74.8% of GDP in the euro area and 77.5% in United States were attributed to services. Globalization and use of information and communication technology has accelerated dissemination of knowledge and increasing customer expectations about services available worldwide. Innovation becomes essential to ensure that service organizations respond with appropriate products and services for each market segment. Customized and placed on time-tomarket new services require a more developed innovation process. Service innovation and new service development process are cited as one of the priorities for academic research in the following years (Karniouchina et al., 2005) This paper has the following objectives: -To present a model for the analysis of innovation process through the service value network, -To verify its applicability through an empirical research, and -To identify the path and mode of innovation for a group of studied organizations and to compare it with previous studies.

The determinants of the quality of Sales-Marketing Interface in a Multinational Customer Brand Focused Company: The Latin American Branches

Customer evolution and changes in consumers, determine the fact that the quality of the interface between marketing and sales may represent a true competitive advantage for the firm. Building on multidimensional theoretical and empirical models developed in Europe and on social network analysis, the organizational interface between the marketing and sales departments of a multinational high-growth company with operations in Argentina, Uruguay and Paraguay is studied. Both, attitudinal and social network measures of information exchange are used to make operational the nature and quality of the interface and its impact on performance. Results show the existence of a positive relationship of formalization, joint planning, teamwork, trust and information transfer on interface quality, as well as a positive relationship between interface quality and business performance. We conclude that efficient design and organizational management of the exchange network are essential for the successful performance of consumer goods companies that seek to develop distinctive capabilities to adapt to markets that experience vertiginous changes

A segment-swapping approach for executing trapped computations

We consider the problem of supporting goal-level, independent andparallelism (IAP) in the presence of non-determinism. IAP is exploited when two or more goals which will not interfere at run time are scheduled for simultaneous execution. Backtracking over non-deterministic parallel goals runs into the wellknown trapped goal and garbage slot problems. The proposed solutions for these problems generally require complex low-level machinery which makes systems difficult to maintain and extend, and in some cases can even affect sequential execution performance. In this paper we propose a novel solution to the problem of trapped nondeterministic goals and garbage slots which is based on a single stack reordering operation and offers several advantages over previous proposals. While the implementation of this operation itself is not simple, in return it does not impose constraints on the scheduler. As a result, the scheduler and the rest of the run-time machinery can safely ignore the trapped goal and garbage slot problems and their implementation is greatly simplified. Also, standard sequential execution remains unaffected. In addition to describing the solution we report on an implementation and provide performance results. We also suggest other possible applications of the proposed approach beyond parallel execution.

Some insights for a relationship marketing model integrating SERVQUAL and customer loyalty in dental clinics

The demand of new services, the emergence of new business models, insufficient innovation, underestimation of customer loyalty and reluctance to adopt new management are evidence of the deficiencies and the lack of research about the relations between patients and dental clinics. In this article we propose the structure of a model of Relationship Marketing (RM) in the dental clinic that integrates information from SERVQUAL, Customer Loyalty (CL) and activities of RM and combines the vision of dentist and patient. The first pilot study on dentists showed that: they recognize the value of maintaining better patients however they don't perform RM actions to retain them. They have databases of patients but not sophisticated enough as compared to RM tools. They perceive that the patients value "Assurance" and "Empathy" (two dimensions of service quality). Finally, they indicate that a loyal patient not necessarily pays more by the service. The proposed model will be validated using Fuzzy Logic simulation and the ultimate goal of this research line is contributing a new definition of CL.

Developmental Expression of Kv Potassium Channels at the Axon Initial Segment of Cultured Hippocampal Neurons

Axonal outgrowth and the formation of the axon initial segment (AIS) are early events in the acquisition of neuronal polarity. The AIS is characterized by a high concentration of voltage-dependent sodium and potassium channels. However, the specific ion channel subunits present and their precise localization in this axonal subdomain vary both during development and among the types of neurons, probably determining their firing characteristics in response to stimulation. Here, we characterize the developmental expression of different subfamilies of voltage-gated potassium channels in the AISs of cultured mouse hippocampal neurons, including subunits Kv1.2, Kv2.2 and Kv7.2. In contrast to the early appearance of voltage-gated sodium channels and the Kv7.2 subunit at the AIS, Kv1.2 and Kv2.2 subunits were tethered at the AIS only after 10 days in vitro. Interestingly, we observed different patterns of Kv1.2 and Kv2.2 subunit expression, with each confined to distinct neuronal populations. The accumulation of Kv1.2 and Kv2.2 subunits at the AIS was dependent on ankyrin G tethering, it was not affected by disruption of the actin cytoskeleton and it was resistant to detergent extraction, as described previously for other AIS proteins. This distribution of potassium channels in the AIS further emphasizes the heterogeneity of this structure in different neuronal populations, as proposed previously, and suggests corresponding differences in action potential regulation.

Colocalization of α-actinin and Synaptopodin in the Pyramidal Cell Axon Initial Segment

The cisternal organelle that resides in the axon initial segment (AIS) of neocortical and hippocampal pyramidal cells is thought to be involved in regulating the Ca(2+) available to maintain AIS scaffolding proteins, thereby preserving normal AIS structure and function. Through immunocytochemistry and correlative light and electron microscopy, we show here that the actin-binding protein ?-actinin is present in the typical cistenal organelle of rodent pyramidal neurons as well as in a large structure in the AIS of a subpopulation of layer V pyramidal cells that we have called the "giant saccular organelle." Indeed, this localization of ?-actinin in the AIS is dependent on the integrity of the actin cytoskeleton. Moreover, in the cisternal organelle of cultured hippocampal neurons, ?-actinin colocalizes extensively with synaptopodin, a protein that interacts with both actin and ?-actinin, and they appear concomitantly during the development of these neurons. Together, these results indicate that ?-actinin and the actin cytoskeleton are important components of the cisternal organelle that are probably required to stabilize the AIS.

Customer training, oriented toward the customer in the spanish affiliate

On that date , the Spanish affiliate offered for the 1st. time to its customers courses oriented toward the user, not the product, within the area of programming, in the subarea of application programming

Customer loyalty plan at Residencia Gómez-Pardo, Universidad Politécnica de Madrid

Accommodation is a first need and one of the most important decisions that university students have to decide taking into account their limited budget. The satisfaction grade of these students is the relevant aspect for the administrators and managers of the university residences, because it allows assuring the viability and sustainability of this kind of accommodation. In a situation of decline in rate of retention of students into the residence, coupled with an environment of economic crisis. Hence, of disposable income reduction, it seems essential to get to know what factors affect the motivation to remain into the university residence more than others when it comes to the final choice. The offer?s increase of different kind of accommodation is another variable to be considered when taking the decision related to the management of this kind of accommodation. Thus, there is the need to know which are the key factors and to obtain information about these variables in order to go deep into the relevance grade with the aim to pursue the strategic objectives, that will allow to improve the relationship with the customer and to respond to his accommodation? needs. This article researches the motivation elements that lead the students to remain in a university residence or to abandon it in exchange or a different accommodation, as per example shared flats or individual apartments. This research work intends to be useful for the university residence?s managers in order to increase its incomes, to raise the satisfaction degree among its residents and to obtain better end results in the management of these properties. The fieldwork conducted in the Residencia Universitaria Gómez Pardo (RUGP), Universidad Politécnica de Madrid (UPM), for four semesters, which means students from 27 different grades (undergraduates) and 81 surveys finished, shows the following conclusions. Not only the relation with the residence?s personnel but also the quality and quantity of the feeding and the availability and quality of the internet service, constitute key factors when it comes to make the decision of remaining or of abandoning the residence when the semester comes to its end.

Customer Relationship Management-PeopleSoft CRM

1 RESUMEN 1.1 Resumen (español) El intercambio y comercio tanto de bienes como servicios se remonta a tiempos inmemoriales dentro de la historia de la humanidad. Desde sus inicios tempranos con el intercambio o trueque de productos en el Neolítico hasta nuestra época híper globalizada, en la que existen clientes potenciales en el otro extremo del mundo, podemos decir que se ha recorrido un largo camino. Con el paso del tiempo y la evolución de la sociedad y la tecnología, así como la evolución empresarial, se ha visto necesario la implementación de estrategias para lograr la fidelización y satisfacción de los clientes. De esta forma entendimos que ya no valía simplemente con vender un producto a un cliente, si no que si queríamos establecer una relación continúa con el mismo, debíamos lograr su satisfacción y por tanto su fidelización. Como forma de extender la relación más allá de una simple venta, las empresas modernas empezaron a implementar diversas estrategias. De esta forma aparecieron los primeros centros de atención al cliente, las primeras aplicaciones hechas a medida para dar soporte a los clientes y por fin los sistemas CRM tal y como los concebimos hoy día. El presente proyecto fin de carrera da una explicación de dichos sistemas indicando cuáles son sus objetos fundamentales y cómo implementan la estrategia CRM y profundiza en uno de los sistemas CRM más utilizados: PeopleSoft CRM, dando una explicación detallada de dicho sistemas así como de los conceptos y lenguaje de programación de dicho sistema CRM. 1.2 SUMMARY (ENGLISH) The exchange and trade of goods as well and services goes back to ancient times in the history of mankind. Since its early beginning with the bartering of products in the Neolithic to our globalized hyper era, in which there are potential customers on the other side of the world, we can say that it has come a long way. After a certain length of time, the society and technology evolution, and also the enterprise development, has been necessary to implement strategies to achieve customer loyalty and satisfaction. We understood in this way that it no longer simply worth to sell a product to a customer, otherwise if we wanted to establish a relationship continues with the same, we should ensure their satisfaction and thus their loyalty. As a way to extend the relationship beyond a simple sale, modern enterprises began to implement several strategies. Therefore appeared the first customer service centers, the first applications tailored to support customers and finally the CRM systems as we know it today. This final project gives an explanation of such systems by indicating what the core objects are and how to implement the CRM strategy, deeping into one of the most widely used CRM systems: PeopleSoft CRM, and also giving a detailed explanation of this system and its programming language.

Implantación de un sistema de depósito, devolución y retorno en el mercado retail español

“Quien contamina, paga“, con esta premisa surgió la idea de este Trabajo Fin de Máster, en adelante TFM, cuyo objetivo era identificar medidas alternativas reales para una optimización del proceso actual de gestión de residuos sólidos urbanos ante una sociedad cada vez más superpoblada y con mayores ratios de consumo. Cada español genera anualmente un volumen de 485 Kg de residuos, de los cuales únicamente el 33 % son reciclados y pueden volver a un flujo normal de uso, especialmente preocupante durante los últimos años es el auge de los productos envasados, tanto de bebidas como de alimentos , cuya utilización se ha duplicado en la última década. La motivación de este trabajo Fin de Máster ha sido la de poner de manifiesto que la sostenibilidad con el medioambiente puede ir de la mano de la rentabilidad y del progreso. Durante este TFM se ha estudiado y analizado la viabilidad económica de implantación de un nuevo modelo de depósito, devolución y retorno en el mercado retail español y como con la adopción de este nuevo sistema se pueden lograr beneficios tanto para el propio minorista, como para el medio ambiente con ratios de reciclado superiores al 98%. La preocupación por el medio ambiente empieza a ser una constante entre los consumidores españoles y dicha preocupación comienza a ser influenciadora en las decisiones de compra (productos eco, sostenibilidad…). Nuestra propuesta consiste en dotar a los principales distribuidores del sector retail español de un sistema de depósito, devolución y retorno para envases de bebidas capaz de generar diferenciación, innovación y rentabilidad frente a la competencia. Dicho sistema consiste en pagar un depósito por cada envase de bebida que se adquiera y su correspondiente devolución en la siguiente compra, una vez que se devuelva vacío al establecimiento. Para ello se ha analizado el sector de la distribución en España, especialmente la distribución de bebidas. Se trata de un sector muy competitivo, que presenta varios formatos en función del tamaño del establecimiento (Hipermercados, Supermercados, tiendas tradicionales). Las principales empresas distribuidoras (Carrefour, Mercadona, Alcampo, Eroski, DIA) se encuentran en procesos de cambios estratégicos para lograr atraer a más consumidores hacia sus tiendas, por lo que nuestra propuesta podrá añadir valor a la hora de influenciar en la decisión del lugar de compra. En nuestro caso, nos dirigiremos principalmente a las grandes empresas distribuidoras, Hipermercados de más de 2.500 m2 ,que cuentan con más de 500 puntos de venta y distribución donde existe la posibilidad real de implantar un SDDR. Además se ha realizado un estudio de mercado sobre la influencia de dicho sistema en el consumidor final, donde se ha detectado dos segmentos principales cuya decisión de compra se vería muy influenciada por la implantación de un SDDR, un segmento Sénior, entre 45-54 años, preocupados por el medio ambiente y con poder adquisitivo suficiente como para que el pago del depósito no sea bloqueante, y un segmento Junior, entre 18-24 años, también muy concienciado el medio ambiente, de capacidad económica menor pero qué influye en la decisión de compra de sus progenitores. Para llevar a cabo este plan de negocio será necesario una inversión inicial de 57.000 €, con unas expectativas de recuperación de dicha inversión en el primer año y una TIR del 56%, presentando un VAN de 127.961 € para los 7 años de vida del proyecto. Para dar a conocer a los clientes del Hipermercado los beneficios de utilizar un sistema SDDR, se realizarán campañas de marketing a través de diferentes canales, promociones de apertura, acciones de marketing exteriores y planes de fidelización. La organización e implantación en el Hipermercado será muy sencilla con roles claramente diferenciados, únicamente involucraría a unos 9 recursos definidos y en aproximadamente 3 meses desde el inicio del proyecto ya se podría ofertar dicho servicio a los clientes del Hipermercado. Además se han analizado los principales riesgos a los que se enfrentaría el negocio, ponderándose en una matriz impacto-probabilidad. Se han establecido medidas correctoras en el caso que dicho riesgo aflore. Habrá que tener especialmente precaución con la pérdida de ventas durante el arranque del negocio en el caso que esto ocurra, por lo que se deberá controlar el gasto, fomentar la captación de clientes y mantener un fondo de maniobra lo suficientemente elevado como para absorber dicho riesgo.---ABSTRACT---“Polluters pay”, with this premise this TFM aimed at identifying real alternative measures for optimization of the current process of solid waste management in a crowded society and with greater consumption ratios. Spaniards generates an annual volume of 485 kg of waste; only 33 % are recycled and can return to a normal flow. Specially concern is the increased of packaged product in recent years, mainly drink and food, their use has been duplicated in the last decade. The motivation for this Thesis was to highlight that sustainability, profitability and progress can go together. During this TFM has been studied and analyzed the economic feasibility of implementing a new model of deposit , refund and return in the Spanish retail market and as with the adoption of this new system can achieve benefits for the retailer itself therefore to the environment with ratios above 98% recycled. Concern for the environment is becoming a constant among Spanish consumers , and this concern is becoming influencer in purchasing decisions ( eco, sustainability ... ) . Our proposal is to provide the main distributors of the Spanish retail sector a system of deposit, refund and return for beverage containers capable of generating differentiation, innovation and profitability over the competition. This system is to pay a deposit for each beverage container they purchase and their corresponding return in the next purchase, once they return empty to the establishment. For this we have analyzed the distribution sector in Spain, especially the distribution of beverages. This is a highly competitive industry, which features various formats depending on the size of establishments (hypermarkets, supermarkets, traditional shops). The main distribution companies (Carrefour, Mercadona, Alcampo, Eroski, DIA) are in the process of strategic changes in order to attract more consumers to their stores, so that our approach can add value in influencing the decision of place shopping. In our case, we will go mainly to large distributors, Hypermarkets of over 2,500 m2, which have more than 500 outlets and distribution where there is a real possibility of implementing a SDDR. It has also conducted a market study on the influence of that system on the final consumer, which has detected two main segments whose purchasing decisions would be greatly influenced by the introduction of a SDDR, a Senior segment, 45-54 years concerned about the environment and purchasing power enough that the deposit is not blocking, and a Junior Segment, aged 18-24, also concern with environment, lower economic capacity but what influences the decision purchase of their parents). To carry out this business plan will require an initial investment of 57,000 €, with expectations of recovery of such investment in the first year and an IRR of 56%, with an NPV of € 127,961 for the 7 years of the project . To publicize hypermarket customers the benefits of using a SDDR system, marketing campaigns conducted through different channels, opening promotions, marketing activities and external loyalty schemes. The organization and implementation in the Hypermarket is easy with distinct roles, involve only about 9 resourced and in about 3 months from the start of the project and could offer this service to customers in the hypermarket. We have also analyzed the main risks and established corrective measures to surface that risk . We should take caution with lost sales during startup of the business, such as control spending, customer retention and maintaining enough working capital.

El perfil de los consumidores de productos de comercio justo. Análisis de las variables que influyen en su intención de compra

El consumo mundial, impulsor del desarrollo y crecimiento económico de los pueblos, no ha sido igual para todas las naciones, ya que sus efectos han sido diferentes para los ciudadanos de los países del Norte y los del Sur, principalmente por dos razones: una, porque han originado complejos y diferentes estilos de vida y aspiraciones, lo que ha originado grandes diferencias entre los individuos de unos y otros países, y, dos, por su falta de valores sociales y éticos. Ante esta situación, la sociedad en su conjunto debe tomar conciencia de este hecho, y a través de un consumo responsable y de un mayor conocimiento de las relaciones comerciales entre los pueblos, debe optar por consumir productos elaborados bajo criterios de justicia y equidad. Para ayudar a alcanzar estos objetivos de equidad, solidaridad, justicia y ética, nació el Comercio Justo, que, en el caso de España, llegó con veinte años de retraso en la década de los ochenta. Aunque a día de hoy sus ventas crecen a un buen ritmo, siguen siendo inferiores al resto de los países europeos, por cuatro razones: (1) el desconocimiento que la mayoría de los potenciales consumidores tienen de este movimiento social; (2) la dificultad de acceder a los productos que comercializan; (3) el poco impulso que se ofrece desde las Administraciones Públicas; y, (4) porque hay pocas investigaciones en las que se haya analizado el Comercio Justo desde la perspectiva de la demanda, lo que ha implicado que no haya un conocimiento profundo sobre los consumidores de este tipo de productos y sobre sus motivaciones de compra. En base a todo lo expuesto, el presente trabajo se concibe como un estudio exploratorio, que tiene como objetivo principal analizar el perfil de los consumidores y no consumidores de productos de Comercio Justo, sus motivaciones de compra y no compra, así como las variables que influyen en la intención de compra futura, tanto en el segmento de consumidores actuales, como en el segmento de no consumidores de este tipo de productos. Para la realización de este trabajo, se ha utilizado, por una parte, una metodología cualitativa, que ha permitido acceder a la información sobre las opiniones y actitudes que intervienen en los procesos de decisión de compra; y, por otra, una metodología cuantitativa, a través de una encuesta online dirigida a 6.500 individuos, que ha permitido tener información, a través de sendos análisis descriptivos univariante y bivariante, de los individuos encuestados sobre el objeto del estudio. Para validar los modelos y contrastar las hipótesis planteadas, se ha utilizado el análisis de fiabilidad y validación de las escalas de medición seleccionadas (Alpha de Cronbach); el análisis factorial exploratorio, para comprobar la dimensionalidad y validez convergente de las escalas de medida; el análisis factorial confirmatorio, para validar la idoneidad de los modelos de medida propuestos; la regresión logística, para comprobar la validez del modelo general de la probabilidad de la compra o no compra de productos de Comercio Justo; y la regresión lineal múltiple, para comprobar la validez de los modelos específicos de intención de compra futura en los segmentos de compradores y de no compradores. Para realizar todos estos análisis, se han utilizado las herramientas informáticas SPSS v21 y AMOS. Las principales conclusiones del trabajo son: (1) que se deben establecer unos criterios claros que definan quién es quién en el movimiento de Comercio Justo, sus fines, sus objetivos, los productos que comercializan, así como su funcionamiento y desarrollo en España; (2) que, a pesar de las grandes ventajas y posibilidades del Comercio Justo, hay una falta de demanda de estos productos por parte de los consumidores responsables, debido principalmente a la falta de información-comunicación sobre el propio movimiento, y, muy especialmente, a la falta de información sobre los productos, los canales de comercialización, las políticas de precios, las políticas de comunicación, etc., y a la necesidad de que estos productos estén accesibles en los lugares donde los consumidores hacen su compra habitual; y (3) que el Comercio Justo español debe afrontar una serie de desafíos, como son la coordinación entre las diferentes organizaciones que participan en su desarrollo; la sensibilización de los consumidores; la creación de una imagen de marca que defina de una manera clara y sencilla qué es el Comercio Justo; la orientación al cliente y no al producto; y extender la red de comercialización de productos de Comercio Justo a los canales donde los consumidores hacen su compra habitualmente. ABSTRACT Global consumption, the driver of economic growth and development of nations, is not the same for all countries, since its effects have been different on people coming from the North or the South. This is due mainly to two reasons: firstly, because they have developed complex and different lifestyles and aspirations, which have led to significant differences between individuals of one country and another and secondly, because they lack social and ethical values. Given this situation, society as a whole should be aware of this fact, and through responsible consumption and a greater knowledge of trade relations between countries, should opt for consuming products produced with criteria of justice and equity. Fair Trade began as a way to help reach these goals of equity, solidarity, justice and ethics. In the case of Spain it did not start until 20 years later, in the eighties. Although today sales of Fair Trade products are growing at a good rate, they are still below that of other European countries, for four reasons: (1) unawareness of this social movement; (2) the difficult access to these products; (3) insufficient government support; (4) the limited research carried out to analyse Fair Trade from the perspective of demand, resulting in a lack of knowledge about this type of consumer and their purchasing motivations. Based on the above, the present study is designed as an exploratory investigation, aimed at analyzing the profile of consumers and non-consumers of Fair Trade, their motivations for buying and not buying, as well as the variables which influence future purchase intention in both the current consumer segment, and the non-user segment of such products. To carry out this study we have used, on the one hand, a qualitative methodology, to obtain information about the views and attitudes involved in the purchase decision process; and on the other, a quantitative methodology, through an online survey of 6,500 individuals, which provided information through two separate univariate and bivariate descriptive analysis, of the individuals interviewed about the object of this study. To validate the models and contrast hypotheses, we have used the reliability analysis and validation of the selected measurement scales (Cronbach's Alpha); exploratory factor analysis to verify the dimensionality and convergent validity of the measurement scales; confirmatory factor analysis to validate the adequacy of the models of measurement proposed; logistic regression, to verify the validity of the general model of the probability of buying or not buying Fair Trade products; and multiple linear regression to test the validity of specific models in future purchase intention in the segments of buyers and non-buyers. To carry out these analyses, we used SPSS v21 software tools and AMOS. The principal conclusions of the investigation are: (1) the need to establish clear criteria which define who is who in the Fair Trade movement, its goals, objectives, the products they sell, as well as its operation and development in Spain; (2) that despite the great advantages and possibilities of Fair Trade, there is a lack of demand for these products by responsible consumers, mainly due to the lack of information-communication about the movement itself, and especially on the range of products, sales channels, pricing policies, communication policies, etc., and the need for these products to be available in places where consumers make their usual purchase; and (3) that Spanish Fair Trade must address a number of challenges such as: coordination between the different organizations involved in trade development; consumer awareness; creation of a brand image that defines in a clear and simple way what Fair Trade is; focus on the customer rather than the product; and expansion of the network of Fair Trade sales outlets to include the channels where consumers usually make their purchases.