Metro de Madrid rolling stock models and comparative studies relating to comfort

This paper presents the work carried out by Metro de Madrid and the Railway Technology Research Centre (Polytechnic University of Madrid), aimed at setting up rolling stock simulation models with a high level of detail. To do this, the features of the SIMPACK simulation tool used to create models have been briefly outlined, explaining the main features of models in two of the series modelled: 7000 and 8000. Finally, the results obtained from comparing comfort in the 7000 and 8000 series are presented.

A comparative study on unconstrained hand biometrics

Biometrics applied to mobile devices are of great interest for security applications. Daily scenarios can benefit of a combination of both the most secure systems and most simple and extended devices. This document presents a hand biometric system oriented to mobile devices, proposing a non-intrusive, contact-less acquisition process where final users should take a picture of their hand in free-space with a mobile device without removals of rings, bracelets or watches. The main contribution of this paper is threefold: firstly, a feature extraction method is proposed, providing invariant hand measurements to previous changes; second contribution consists of providing a template creation based on hand geometric distances, requiring information from only one individual, without considering data from the rest of individuals within the database; finally, a proposal for template matching is proposed, minimizing the intra-class similarity and maximizing the inter-class likeliness. The proposed method is evaluated using three publicly available contact-less, platform-free databases. In addition, the results obtained with these databases will be compared to the results provided by two competitive pattern recognition techniques, namely Support Vector Machines (SVM) and k-Nearest Neighbour, often employed within the literature. Therefore, this approach provides an appropriate solution to adapt hand biometrics to mobile devices, with an accurate results and a non-intrusive acquisition procedure which increases the overall acceptance from the final user.

Comparative assessment of global irradiation from a satellite estimate model (CM SAF) and on-ground measurements (SIAR): a Spanish case study

An analysis and comparison of daily and yearly solar irradiation from the satellite CM SAF database and a set of 301 stations from the Spanish SIAR network is performed using data of 2010 and 2011. This analysis is completed with the comparison of the estimations of effective irradiation incident on three different tilted planes (fixed, two axis tracking, north-south hori- zontal axis) using irradiation from these two data sources. Finally, a new map of yearly values of irradiation both on the horizontal plane and on inclined planes is produced mixing both sources with geostatistical techniques (kriging with external drift, KED) The Mean Absolute Difference (MAD) between CM SAF and SIAR is approximately 4% for the irradiation on the horizontal plane and is comprised between 5% and 6% for the irradiation incident on the inclined planes. The MAD between KED and SIAR, and KED and CM SAF is approximately 3% for the irradiation on the horizontal plane and is comprised between 3% and 4% for the irradiation incident on the inclined planes. The methods have been implemented using free software, available as supplementary ma- terial, and the data sources are freely available without restrictions.

The DLMT hardware implementation. A comparative study with the DCT and the DWT

In the last recent years, with the popularity of image compression techniques, many architectures have been proposed. Those have been generally based on the Forward and Inverse Discrete Cosine Transform (FDCT, IDCT). Alternatively, compression schemes based on discrete "wavelets" transform (DWT), used, both, in JPEG2000 coding standard and in H264-SVC (Scalable Video Coding) standard, do not need to divide the image into non-overlapping blocks or macroblocks. This paper discusses the DLMT (Discrete Lopez-Moreno Transform) hardware implementation. It proposes a new scheme intermediate between the DCT and the DWT, comparing results of the most relevant proposed architectures for benchmarking. The DLMT can also be applied over a whole image, but this does not involve increasing computational complexity. FPGA implementation results show that the proposed DLMT has significant performance benefits and improvements comparing with the DCT and the DWT and consequently it is very suitable for implementation on WSN (Wireless Sensor Network) applications.

Tool wear monitoring using neuro-fuzzy techniques: a comparative study in a turning process

Tool wear detection is a key issue for tool condition monitoring. The maximization of useful tool life is frequently related with the optimization of machining processes. This paper presents two model-based approaches for tool wear monitoring on the basis of neuro-fuzzy techniques. The use of a neuro-fuzzy hybridization to design a tool wear monitoring system is aiming at exploiting the synergy of neural networks and fuzzy logic, by combining human reasoning with learning and connectionist structure. The turning process that is a well-known machining process is selected for this case study. A four-input (i.e., time, cutting forces, vibrations and acoustic emissions signals) single-output (tool wear rate) model is designed and implemented on the basis of three neuro-fuzzy approaches (inductive, transductive and evolving neuro-fuzzy systems). The tool wear model is then used for monitoring the turning process. The comparative study demonstrates that the transductive neuro-fuzzy model provides better error-based performance indices for detecting tool wear than the inductive neuro-fuzzy model and than the evolving neuro-fuzzy model.

Low-speed longitudinal controllers for mass-produced cars: A comparative study

Four longitudinal control techniques are compared: a classical Proportional-Integral (PI) control; an advanced technique-called the i-PI-that adds an intelligent component to the PI; a fuzzy controller based on human experience; and an adaptive-network-based fuzzy inference system. The controllers were designed to tackle one of the challenging topics as yet unsolved by the automotive sector: managing autonomously a gasoline-propelled vehicle at very low speeds. The dynamics involved are highly nonlinear and constitute an excellent test-bed for newly designed controllers. A Citroën C3 Pluriel car was modified to permit autonomous action on the accelerator and the brake pedals-i.e., longitudinal control. The controllers were tested in two stages. First, the vehicle was modeled to check the controllers' feasibility. Second, the controllers were then implemented in the Citroën, and their behavior under the same conditions on an identical real circuit was compared.

Comparative assessment of global irradiation from a satellite estimate model (CM SAF) and on-ground measurements (SIAR): a Spanish case study

An analysis and comparison of daily and yearly solar irradiation from the satellite CM SAF database and a set of 301 stations from the Spanish SIAR network is performed using data of 2010 and 2011. This analysis is completed with the comparison of the estimations of effective irradiation incident on three different tilted planes (fixed, two axis tracking, north-south hori- zontal axis) using irradiation from these two data sources. Finally, a new map of yearly values of irradiation both on the horizontal plane and on inclined planes is produced mixing both sources with geostatistical techniques (kriging with external drift, KED) The Mean Absolute Difference (MAD) between CM SAF and SIAR is approximately 4% for the irradiation on the horizontal plane and is comprised between 5% and 6% for the irradiation incident on the inclined planes. The MAD between KED and SIAR, and KED and CM SAF is approximately 3% for the irradiation on the horizontal plane and is comprised between 3% and 4% for the irradiation incident on the inclined planes. The methods have been implemented using free software, available as supplementary ma- terial, and the data sources are freely available without restrictions.

Propuesta de un marco conceptual para el análisis comparativo de las redes de distribución de dos supermercados online = Proposal of a conceptual framework for the comparative analysis of the distribution networks of two online supermarkets

In this article the network configuration for fulfillment and distribution of online orders of two British retailers is analyzed and compared. For this purpose, it is proposed a conceptual framework that consists of the key following aspects: network configuration, transportation management and location of demand. As a result is not obvious to determine the ideal centralization degree in each case. Finally, it is suggested the future development of an analytic tool that helps to choose the most appropriate model.

Comparative theoretical analysis between parallel and perpendicular geometries for 2D particle patterning in photovoltaic ferroelectric substrates

This paper describes the dielectrophoretic potential created by the evanescent electric field acting on a particle near a photovoltaic crystal surface depending on the crystal cut. This electric field is obtained from the steady state solution of the Kukhtarev equations for the photovoltaic effect, where the diffusion term has been disregarded. First, the space charge field generated by a small, square, light spot where d _ l (being d a side of the square and l the crystal thickness) is studied. The surface charge density generated in both geometries is calculated and compared as their relation determines the different properties of the dielectrophoretic potential for both cuts. The shape of the dielectrophoretic potential is obtained and compared for several distances to the sample. Afterwards other light patterns are studied by the superposition of square spots, and the resulting trapping profiles are analysed. Finally the surface charge densities and trapping profiles for different d/l relations are studied.

Arquitectura industrial tabacalera en la España peninsular: secaderos y fábricas

La Arquitectura industrial del tabaco en España está representada por dos tipos de construcciones, que corresponden a las dos fases en las que se divide el proceso de producción del tabaco: los secaderos (arquitectura bioclimática donde se realiza el secado), y las fábricas (centros donde se elabora el tabaco procedente de los secaderos). Las fábricas se repartieron por todo el territorio español, ocupando preferiblemente los lugares costeros, aunque existen casos en los que su localización obedecía a razones políticas. Estos edificios, en su mayoría, incluidos en los centros históricos de las ciudades, han cambiando de uso, y las antiguas fábricas de tabaco se han transformado en su mayoría, en centros de cultura, o centros sociales y representativos. La tesis surge del análisis de las características constructivas de la arquitectura industrial del tabaco: de los secaderos y de las fábricas, por tratarse de una tipología con suficiente entidad y un ejemplo de arquitectura bioclimática de producción en el caso de los secaderos, y por conseguir haberse adaptado a otros usos en el caso de las fábricas. La arquitectura de producción emplea un lenguaje acorde con los avances de la industrialización, anticipando materiales y estructuras, y condensando en una tipología específica las complejas relaciones establecidas entre producto, hombres y espacio. Estos edificios tuvieron una extensa implantación en el territorio, y se caracterizan por una serie de valores tecnológicos, arquitectónicos, sociológicos y paisajísticos, que hacen de ellos un documento de primera magnitud para conocer: la evolución e implantación de las técnicas constructivas (materiales y estructuras), los procesos de innovación tipológica y la estructura económica y procedimientos técnicos utilizados. El territorio en el que se insertan constituye su contexto territorial, por lo que no sería adecuado considerar estos edificios como elementos aislados, sin analizar la relación con el entorno en el que se generaron. Por este motivo, se analizan las condiciones higrotérmicas ambientales de los secaderos para compararlas con las de confort humano y establecer relaciones y parámetros compatibles. Los ejemplos analizados de secaderos son todos de fábrica. El uso del ladrillo como módulo principal para la elaboración de un edificio, supone la consideración de un “grado cero” de todo el aparato constructivo y compositivo de la arquitectura. Dejar el ladrillo visto, supone hacer explícitos todos los procesos acumulativos. Este elemento mínimo, permite unas posibilidades enormemente abiertas, pero no absolutamente aleatorias, que definen su propia lógica combinatoria. La exigencia de sinceridad, característica de la arquitectura industrial, en la exposición de los materiales, exhibiéndolos en su propia naturaleza y en el modo real de ser utilizados, se hace patente en este tipo de construcción. Se realiza un estudio de permeabilidad en las fachadas de los secaderos, para determinar el grado de ventilación y su relación con la orientación, el patrón de celosía empleado y el volumen total. Este sistema de acondicionamiento climático específico, puede servir de recurso a otras construcciones, por lo que se podría trasladar el sistema constructivo y formal de los secaderos a otros usos, desde una doble vertiente: Arquitectura para la adaptación climática al entorno. Arquitectura como generadora de condiciones climáticas específicas, en el interior. La utilidad de los secaderos es fundamentalmente: proporcionar sombra, ventilación y un espacio cubierto, pero permeable en sus fachadas. La arquitectura industrial debe ser reconocida dentro del conjunto patrimonial, debido a sus características propias que permiten su diferenciación del resto de la arquitectura. Conocer la estructura productiva permite analizar correctamente estas construcciones, ya que el programa inicial es básico para entender la organización del espacio interior. Las fábricas no se situaron cerca de las zonas de producción del tabaco, excepto en dos casos: Cádiz y Palazuelo, en los que existen secaderos y campos de cultivo de hoja de tabaco en las áreas cercanas. La principal causa de esta separación es que el proceso de obtención de tabaco es un proceso dividido en dos fases principales: proceso primario y proceso secundario. En el proceso primario la hoja de tabaco se seca en los secaderos, en los que es determinante el clima, pero únicamente en el caso del secado del tabaco al aire. En el proceso secundario sin embargo, el tabaco llega previamente tratado a las fábricas, por lo que no influye el clima en esta parte del proceso. Esta razón determina que en las áreas climáticas donde se centra el estudio, haya zonas en las que existen fábrica y secaderos y otras en las que únicamente existe fábrica, o sólo secaderos. La localización de las fábricas atendía a razones de muy diferente índole, las más importantes fueron: geográficas, estratégicas, y políticas. En la mayoría de las fábricas la elección de la ciudad de emplazamiento estaba ligada a la recepción de la materia prima, que principalmente se hacía por vía marítima, o acuática (el caso de Sevilla), y por vía terrestre, utilizando como medio de transporte el ferrocarril. Sólo dos casos, de las antiguas fábricas, corresponden a razones políticas, son las dos únicas que no están en la costa: Madrid y Logroño. La de Madrid se construyó por centralidad política, y porque geográficamente ocupaba el punto central de todas las comunicaciones terrestres por carretera y ferrocarril. Muchas de las fábricas se situaron cercanas a las estaciones de ferrocarril. La de Logroño atendió, sin embargo, a razones políticas. Para finalizar, se realiza un estudio comparativo de las fábricas de Sevilla, Madrid y San Sebastián. Las razones que justifican esta elección son: - La de Sevilla fue históricamente la primera fábrica y la más importante. - La de Madrid fue la más importante a nivel administrativo, la sede de Tabacalera se instaló en la capital, y después de la de Sevilla, fue la que sirvió de modelo al resto de las fábricas. - La de San Sebastián era la más grande del Norte. Los análisis que se han realizado son de: volumen y superficies de patios, superficies de cubierta, permeabilidad o huecos en fachadas, orientación y soleamiento de patios, distribución espacial interior y organización, y evolución de usos. Podemos observar que en la mayoría de estas fábricas ha habido una transformación en el uso, pasando de ser edificios industriales a edificios culturales. Estas construcciones se pueden considerar como infraestructuras adaptables, por ser útiles, sostenibles y funcionales. ABSTRACT The Spanish industrial architecture of tobacco is represented by two construction types that correspond to the two phases of tobacco production: the drying sheds (bioclimatic constructions where the drying process takes place) and factories (centres where tobacco is processed after the drying process). The factories were distributed throughout the Spanish territory, preferably occupying coastal locations, although some of them were located elsewhere following political reasons. Most of the buildings inside city centres have suffered changes in their use, becoming cultural, social or representative centres. This thesis attempts the analysis of the constructive systems employed in tobacco industrial architecture, from drying sheds to factories. The drying sheds are an example of bioclimatic industrial architecture. The factories are a typology that have successfully adapted to new uses. Industrial architecture uses a language that follows the advances in industrialization, anticipating new materials and structures, and merging the complex relationships established among products, human beings, space and locations. These buildings were promoted extensively in the country. They are characterized by technological architectural sociological and landscaping innovations. They are considered as important examples of the evolution and the implementation of construction techniques (building materials and structures). They are also considered as examples of innovation in the building typology, in their economic structure and in the technologies that they have applied. The settings in which the drying sheds are placed have an important influence in them. They cannot be considered as isolated elements. Instead, there is a close relationship between drying sheds and the surroundings in which they are located. Drying sheds’ hygrotermal and environmental conditions are analyzed in this thesis to compare them with the values of human comfort and find suitable relationships and parameters. All the drying sheds that have been analyzed are constructed with brick. This implies a consideration of “zero degree” for both the construction and the composition of the architectural process. The detailing - entails making all the accumulative processes explicit as the brick walls are left exposed. This minimal component allows a wide range of options that are never random but based on the logic of the way in which it is combined. The “sincerity” in the exposition of material, displaying them in their very nature and showing how they are really used, is a basic characteristic of industrial architecture, and it is even more expressive in these types of buildings. The walls of the drying sheds undergo a permeability assessment in order to determine the degree of ventilation and orientation, the lattice pattern used and the overall volume. This specific conditioning system can serve as a resource for other buildings, and consequently, it could be transferred to other uses within a two-pronged approach: -Climatically adapted architecture that takes into account the surroundings. -Architecture as a generator of specific climatic conditions indoors. Drying sheds’ main purposes / aims deal with how to provide shade, ventilation and a covered space as well as permeability. The industrial architecture must be recognized as historical valuable buildings due to its intrinsic and distinctive characteristics. Knowing the productive structure, allow us to make a proper analysis of these buildings, since the basic aim, is to understand the spatial organization indoors. Factories did not come close to the tobacco production, with the exception of Cádiz and Palazuelo, where there are sheds and tobacco croplands nearby. The main reason for this separation is that the process of obtaining tobacco has two processes: the primary process and the secondary process. In the primary process tobacco leaves are left to dry. In the secondary process, previously manufactured tobacco allocated in the factories where the weather conditions are not important. This fact determines that in the climate areas where this study tales place there are some cases in which we can find both factories and drying sheds, and others where there are either factories or drying sheds only. The location of these factories met various demands, being the most outstanding the ones related to geographic, strategic and political reasons. In most factories the choice of its location was often linked to the incoming of raw goods, mainly delivered through waterways –it is the case of Seville,) and by land, using railways. The location of the factories was linked to political reasons in only two cases Madrid and Logroño, which are the only ones that are not placed near the coast. The one in Madrid was built due to its political centrality and because geographically speaking, it was the reference landmark of means of land and rail transports. Many factories, in fact, were settled nearby rail stations. For the factory in Logroño, only political reasons were taken into consideration. I should like to close by undertaking a comparative study of factories in Seville, Madrid and San Sebastian. There are a number of reasons to substantiate this choice: -The factory in Seville was historically speaking the first that was built and the most important one. -The factory in Madrid was the most important one administratively. This factory was the headquarters as well as being, after Seville, the one which provided a model for other factories. -The factory in San Sebastian is the biggest in the North of Spain. The analysis carried out are related to the volume of the buildings and the surface areas of the courtyards, the surface of the roofs, the permeability of the walls and the openings of the façade, the orientation and the sun exposure, the indoor spatial distribution and organization and evolution of the uses (formerly and currently) I observe that in most of these factories there has been a change in the use of the buildings, from industrial cultural purposes. These buildings can be considered as adaptable infrastructures based on a combination of architectural practicability, sustainability and functionality.

Metodología docente para la implantación de la materia tecnología industrial II en centros docentes de tamaño medio

La Ley Orgánica 8/2013 para la mejora de la calidad educativa, facilita al alumno de bachillerato una amplia posibilidad de configuración de los estudios en función de sus intereses. Sin embargo, la oferta educativa real resulta mucho más restringida. En el presente documento, se aborda el caso de la materia, del bloque de materias específicas, Tecnología Industrial II, la cual no está siendo impartida en la mayoría de los centros docentes como consecuencia del número insuficiente de alumnos que la solicitan. Tras un análisis inicial del currículo de la materia, se desarrolla un estudio que profundiza en las relaciones existentes con el resto de asignaturas de Educación Secundaria y Bachillerato. Las vínculos más significativos que se han localizado responden, por una parte, al solapamiento de contenidos que inevitablemente surge con otras materias y; por otra, a la ubicación de los fundamentos necesarios para abordar los contenidos de Tecnología Industrial II. El objeto último del análisis consiste en plantear una metodología docente que permita la integración real de esta materia en los centros de dimensión media. Para ello, y a la vista de los resultados obtenidos, se articulan diferentes estrategias de actuación que, a la vez que enriquecen el acto pedagógico, permiten optimizar los recursos humanos y materiales necesarios para abordar la enseñanza de Tecnología Industrial II. ABSTRACT The Law 8/2013 for the improvement of the educational quality facilitates to the pupil a wide possibility to configurate his studies in depend of his interest. Nevertheless, the real offer turns out to be restricted. The present document studies the subject Industrial Technologies II; who is not been teached in most educational center, as they are not enough pupils interested in it. After an initial analysis of the subject there have been developed a studiy that look for the existing relations with the contents of other subjects in the same cycle. The more important relations will be clasifficate in two different types. In the first place, the repetition of contents, in the second place the basement concepts necessaries to study the subject

Criterios de restauración, intervención y revitalización del patrimonio industrial : la fábrica de gas de San Paolo en Roma

La tesis está centrada en el patrimonio industrial, y trata de ahondar en los temas enunciados en el título, Criterios de restauración, intervención y revitalización del patrimonio industrial (capítulo 1). La fábrica de gas de San Paolo en Roma (capítulo 2): En el primer capítulo, se profundiza en los criterios institucionalizados de actuación en el patrimonio, pero también se habla sobre la singularidad, los valores originales, estratificados en cada construcción y su contexto. Ello resume la intención de la doctoranda al entender la necesidad del análisis de cada obra en modo profundo, concreto y abierto a novedosos acercamientos, antes de su transformación. Al hablar de intervención frente a restauración, se aborda la conocida polémica que plantea el modo de acercarse al legado histórico. Parece necesario enunciar cómo se consideran en el trabajo estos términos. Mientras la restauración (como diría Cesare Brandi, constituye el momento metodológico del reconocimiento de la obra de arte en su consistencia física y en su doble polaridad estética e histórica, en orden a su transmisión al futuro) es una acción más restrictiva, que implica atención suma a la recuperación y conservación de los valores significativos y únicos del bien, en comunicación con un (posible) equipo interdisciplinar; por intervención se entiende aquí un desarrollo más personal y libre por parte del proyectista, en el que se produce un proceso dialéctico entre la preexistencia y el posicionamiento crítico adoptado a la hora de dar un obligado nuevo uso a ese bien. Es decir, el contraste está en el diferente reconocimiento de la materialidad física y sus significados. En torno a la restauración/intervención, se analizan las perspectivas de actuación en España e Italia, contrastando factores como la formación del arquitecto o el entorno laboral-cultural, y utilizando el método analítico comparativo de casos. Habría un tercer concepto: el de revitalización del patrimonio industrial, Éste hace referencia a su transformación, a sus usos más comunes y compatibles, a la redimensión artística que ha experimentado la arquitectura industrial gracias al arte contemporáneo y a su relación con la Modernidad. Por último, se enuncia en el título el caso de estudio, la Fábrica, que ocupa el segundo capítulo. Se trata de un enorme conjunto industrial singular semi abandonado en el confín del centro histórico, cuyo protagonista es un gran gasómetro, que la autora ha tenido la oportunidad de descubrir en su estancia en la Ciudad Eterna. Este barrio constituyó el primer y único sector industrial de la Roma moderna a inicios del siglo XX. Por varias causas históricas y voluntad política, la ciudad prácticamente no tuvo más desarrollo industrial que el área mencionada, donde se implantaron servicios y actividades de gran transformación (Matadero, Mercados Generales, Almacenes Fluviales, Central Montemartini o esta fábrica). A partir de 1920, se empezó a construir un tejido productivo que la llevó de la situación de posguerra al milagro económico. Frente al mito de la Roma monumental o de la Roma cotidiana, aparece el aspecto industrial como mito de la contemporaneidad. Sin embargo, esta ciudad es demasiado antigua como para convertirse en moderna, y su proceso industrial en contraste con su larga historia resulta breve. La inmediata relación de la fase industrial romana con el resultado de este desarrollo viene identificada con las instalaciones señaladas, más significativas por su excepcionalidad que por la duración del momento irrepetible que representan. Su presencia física perdura a pesar de su abandono, aisladas tras su muro perimetral y casi desconocidas. Esto las hace apetecibles para la especulación inmobiliaria y resultan un caso de estudio ideal para realizar un Plan de Intervención Global, en el que determinar una serie de intervenciones necesarias, usos compatibles y directrices para la ordenación del conjunto, coherentes con los conceptos manejados en el primer capítulo. ABSTRACT The thesis focuses on industrial heritage, delving into the topics listed in its title, Criteria for the restoration, intervention and revitalisation of industrial heritage (chapter 1). The San Paolo gas factory in Rome (chapter 2): Chapter one elaborates on the official criteria to take action on heritage, but also deals with the singularity and original values unique to each construction and its context. This underlines the PhD candidate’s intentions by understanding the need for an in-depth and specific analysis, open to novel approaches to each site before its transformation. When speaking of intervention, as opposed to restoration, we address the well-known controversy that stems from the different ways of approaching historical heritage. It seems necessary to explain how these terms are interpreted in this piece of work. Whereas restoration (as Cesare Brandi would say, constitutes the methodological moment in which the work of art is appreciated in its material form and in its historical and aesthetic duality, with a view to transmitting it to the future) is a more restrictive action, demanding the utmost attention to the recovery and preservation of the piece of heritage’s defining and exceptional values, (ideally) in communication with a interdisciplinary team. By intervention, we hereby understand a more personal and free procedure carried out by the designer in which a dialectical process takes place between preexistence and the critical stance taken in order to give that good a much needed new use. That is, contrast lies in the different recognition of physical materiality and its meanings. As for the restoration/intervention dilemma, the different courses of action followed in Spain and Italy will be analysed, contrasting the architects’ training, the labourcultural environment and taking an analytical comparative case study method. There is a third concept: the revitalisation of industrial heritage, which refers to its transformation, its most common and compatible uses, the artistic redimensioning that industrial architecture has experienced thanks to contemporary art, and its relationship with Modernity. Lastly, the title refers to the case study, i.e., the analysis of the Factory, which makes up chapter 2. It is an enormous and semiabandoned peerless industrial complex on the edge of the historical city centre whose main landmark is a huge gasometer, which the author had the chance to discover during her stay in the Eternal City. This district made up the first and only industrial sector in the modern Rome of the early 20th century. Due to a number of reasons, both historical and political, barely no further industrial development took place in the city beyond the mentioned area, where processing services and activities were set up (Slaughterhouse, General Markets, Riverside Warehouses, Montemartini Power Plant or the said factory). In the 1920s began the construction of the productive fabric that raised the city from its postwar plight to the economic miracle. As opposed to the myth of monumental Rome and daily-life Rome, this industrial Rome rose as contemporaneity’s myth. However, this city is too ancient to become modern, and its industrial process strikes us as brief when confronted with its long history. The close relationship between Rome’s industrial stage and the consequences of this development is best represented by the aforementioned facilities, more relevant due to their uniqueness than the length of the once-in-a-lifetime moment they represent. Their physical presence lives on despite abandonment and isolation, as they stand vastly unknown behind their perimeter walls. This renders them appealing to property speculators, becoming an ideal case study for the creation of a Global Intervention Plan in which to determine a series of necessary actions, compatible uses and directives, all of them consistent with the concepts dealt with in chapter 1. RIASSUNTO La tesi è focalizzata sul patrimonio industriale e cerca di approfondire le tematiche contenute nel titolo, Criteri di restauro, intervento e rivitalizzazione del patrimonio industriale (capitolo 1). La Fabbrica del gas di San Paolo a Roma (capitolo 2): Nel primo capitolo vengono presi in esame i criteri istituzionalizzati di attuazione nel patrimonio, ma si parla anche della unicità, i valori originali, stratificati in ogni costruzione ed il suo contesto. Questo riassume l’intenzione della dottoranda di capire la necessità dell’analisi di ogni opera in modo profondo, concreto e aperto a nuovi approcci, prima della sua trasformazione. Nel parlare di intervento versus restauro, si affronta la famosa polemica che considera il modo di avicinarsi all’eredità storica. Appare necessario precisare come questi termini sono considerati in questo lavoro. Mentre il restauro (come direbbe Cesare Brandi, costituisce il momento metodologico del riconoscimento dell’opera d’arte nella sua consistenza fisica e nella duplice polarità estetica e storica, in vista della sua trasmissione nel futuro) è un’azione più restrittiva, e quindi implica massima attenzione al recupero e conservazione dei valori significativi ed unici del bene, in comunicazione con una (eventuale) squadra interdisciplinare; per intervento si intende qui un processo più personale e libero del progettista, nel quale si produce uno sviluppo dialettico tra la preesistenza e la posizione critica adottata quando si deve dare un nuovo uso di quel bene. Vale a dire che il contrasto risiede nel diverso riconoscimento della materialità fisica e i loro significati. Intorno al restauro / intervento, si analizzano le prospettive di attuazione in Spagna e Italia, contrastando diversi fattori come la formazione dell’architetto o l’ambiente lavorativo-culturale, ed impiegando il metodo analitico comparativo dei casi. Ci sarebbe un terzo concetto: quello della rivitalizzazione del patrimonio industriale. Questo fa riferimento alla sua trasformazione, ai suoi usi più comuni e compatibili, al ridimensionamento artistico vissuto dall’archeologia industriale grazie all’arte contemporanea ed al suo rapporto con la Modernità. In ultimo, si enuncia nel titolo il caso di studio, ovvero l’analisi della Fabbrica, che occupa il secondo capitolo. Si tratta di un enorme complesso industriale semi-abbandonato al confine con il centro storico, il cui protagonista è un grande gasometro, che l’autrice ha avuto modo di scoprire durante il suo soggiorno nella Città Eterna. Questo quartiere costituì il primo e unico moderno settore industriale della Roma moderna all’inizio del Novecento. Per diverse ragioni storiche e volontà politiche, la città praticamente non ha subito ulteriore sviluppo industriale oltre l’area citata, dove si impiantarono servizi e attività di grande trasformazione (Mattatoio, Mercati Generali, Magazzini Generali, Centrale Montemartini o questa fabbrica). Dal 1920, si inizió a costruire un tessuto prodottivo che portò la città dalla situazione post-bellica al miracolo economico. Di fronte al mito della Roma monumentale o della Roma quotidiana, appare questa Roma industriale come mito della contemporaneità. Tuttavia, questa città è troppo antica per diventare moderna, ed il suo processo industriale in contrasto con la sua lunga storia risulta breve. Il rapporto diretto della fase industriale romana con il risultato di questo sviluppo viene identificato con gli impianti segnalati, più significativi per la loro unicità che per la durata del momento irripetibile che rappresentano. La loro presenza fisica perdura nonostante l’abbandono, isolati dietro il loro muro di cinta e quasi sconosciuti. Questo li rende auspicabile per la speculazione immobiliare e sono un caso ideale per eseguire un Piano di Intervento Globale, che determini una serie di interventi necessari, usi compatibili e linee guida per la pianificazione del tutto, in linea con i concetti utilizzati nel primo capitolo.