Selective area growth of a- and c-plane GaN nanocolumns by molecular beam epitaxy using colloidal nanolithography

Selective area growth of a-plane GaN nanocolumns by molecular beam epitaxy was performed for the first time on a-plane GaN templates. Ti masks with 150 nm diameter nanoholes were fabricated by colloidal lithography, an easy, fast and cheap process capable to handle large areas. Even though colloidal lithography does not provide a perfect geometrical arrangement like e-beam lithography, it produces a very homogeneous mask in terms of nanohole diameter and density, and is used here for the first time for the selective area growth of GaN. Selective area growth of a-plane GaN nanocolumns is compared, in terms of anisotropic lateral and vertical growth rates, with GaN nanocolumns grown selectively on the c-plane

Electrophoretic Deposition of Transparent ZnO Thin Films from Highly Stabilized Colloidal Suspensions

The parameters that control the stability of ZnO-nanoparticles suspensions and their deposition by electrophoretic deposition were studied, so as to organize the assembly and compaction of nanoparticles. The addition of cationic polyelectrolyte - Polyethylenimine (PEI) - with different molecular weights was investigated, in order to study their effectiveness and the influence of the molecular weight of the organic chain on suspensions dispersion. It was found that PEI with the highest molecular weight provided better dispersion conditions. Cathodic EPD was performed under previously optimized suspensions conditions and over electropolished stainless steel substrates. Experimental results showed that the EPD process in these conditions allows obtaining dense transparent ZnO thin films. Deposition times and intensities were optimized by analyzing the resulting thin films characteristics. Finally, the deposits were characterized by FE-SEM, AFM, and different spectroscopic techniques.

Self-organized colloidal quantum dots and metal nanoparticles for plasmon-enhanced intermediate-band solar cells

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude. In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance. The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.

Desarrollo de estructuras nanofotonicas de campo cercano para intensificacion localizada de luz en celulas solares de banda intermedia - Near-field nanophotonic structures for localized light enhancement in intermediate band solar cells

This doctoral thesis explores some of the possibilities that near-field optics can bring to photovoltaics, and in particular to quantum-dot intermediate band solar cells (QD-IBSCs). Our main focus is the analytical optimization of the electric field distribution produced in the vicinity of single scattering particles, in order to produce the highest possible absorption enhancement in the photovoltaic medium in their surroundings. Near-field scattering structures have also been fabricated in laboratory, allowing the application of the previously studied theoretical concepts to real devices. We start by looking into the electrostatic scattering regime, which is only applicable to sub-wavelength sized particles. In this regime it was found that metallic nano-spheroids can produce absorption enhancements of about two orders of magnitude on the material in their vicinity, due to their strong plasmonic resonance. The frequency of such resonance can be tuned with the shape of the particles, allowing us to match it with the optimal transition energies of the intermediate band material. Since these metallic nanoparticles (MNPs) are to be inserted inside the cell photovoltaic medium, they should be coated by a thin insulating layer to prevent electron-hole recombination at their surface. This analysis is then generalized, using an analytical separation-of-variables method implemented in Mathematica7.0, to compute scattering by spheroids of any size and material. This code allowed the study of the scattering properties of wavelengthsized particles (mesoscopic regime), and it was verified that in this regime dielectric spheroids perform better than metallic. The light intensity scattered from such dielectric spheroids can have more than two orders of magnitude than the incident intensity, and the focal region in front of the particle can be shaped in several ways by changing the particle geometry and/or material. Experimental work was also performed in this PhD to implement in practice the concepts studied in the analysis of sub-wavelength MNPs. A wet-coating method was developed to self-assemble regular arrays of colloidal MNPs on the surface of several materials, such as silicon wafers, amorphous silicon films, gallium arsenide and glass. A series of thermal and chemical tests have been performed showing what treatments the nanoparticles can withstand for their embedment in a photovoltaic medium. MNPs arrays are then inserted in an amorphous silicon medium to study the effect of their plasmonic near-field enhancement on the absorption spectrum of the material. The self-assembled arrays of MNPs constructed in these experiments inspired a new strategy for fabricating IBSCs using colloidal quantum dots (CQDs). Such CQDs can be deposited in self-assembled monolayers, using procedures similar to those developed for the patterning of colloidal MNPs. The use of CQDs to form the intermediate band presents several important practical and physical advantages relative to the conventional dots epitaxially grown by the Stranski-Krastanov method. Besides, this provides a fast and inexpensive method for patterning binary arrays of QDs and MNPs, envisioned in the theoretical part of this thesis, in which the MNPs act as antennas focusing the light in the QDs and therefore boosting their absorption

Critical aspects of substrate nanopatterning for the ordered growth of GaN nanocolumns.

Precise and reproducible surface nanopatterning is the key for a successful ordered growth of GaN nanocolumns. In this work, we point out the main technological issues related to the patterning process, mainly surface roughness and cleaning, and mask adhesion to the substrate. We found that each of these factors, process-related, has a dramatic impact on the subsequent selective growth of the columns inside the patterned holes. We compare the performance of e-beam lithography, colloidal lithography, and focused ion beam in the fabrication of hole-patterned masks for ordered columnar growth. These results are applicable to the ordered growth of nanocolumns of different materials.

Fabrication of GaN nanorods by focused ion beam

Ordered arrays of III-Nitride nanocolumns are excellent candidates for the fabrication of nano-optoelectronic devices. Different technologies such as e-beam lithography or colloidal lithography, have been used to obtain ordered arrays. All these technologies have in common several processing steps that can affect the crystalline growth of the nanocolumns. In this work, we present a single lithographic step that permits to grow ordered GaN nanocolumns with different geometries. The patterning is based in the use of a focusedionbeam with different doses. With this method has been possible to create GaN nanopillars and nanocylinders

Crecimiento, fabricación y caracterización de heteroestructuras y nanocolumnas ordenadas basadas en nitruros del grupo III para aplicaciones sensoras

Esta memoria está basada en el crecimiento y caracterización de heteroestructuras Al(Ga)N/GaN y nanocolumnas ordenadas de GaN, y su aplicación en sensores químicos. El método de crecimiento ha sido la epitaxia de haces moleculares asistida por plasma (PAMBE). En el caso de las heteroestructuras Al(Ga)N/GaN, se han crecido barreras de distinto espesor y composición, desde AlN de 5 nm, hasta AlGaN de 35 nm. Además de una caracterización morfológica, estructural y eléctrica básica de las capas, también se han fabricado a partir de ellas dispositivos tipo HEMTs. La caracterización eléctrica de dichos dispositivos (carga y movilidad de en el canal bidimensional) indica que las mejores heteroestructuras son aquellas con un espesor de barrera intermedio (alrededor de 20 nm). Sin embargo, un objetivo importante de esta Tesis ha sido verificar las ventajas que podían tener los sensores basados en heteroestructuras AlN/GaN (frente a los típicos basados en AlGaN/GaN), con espesores de barrera muy finos (alrededor de 5 nm), ya que el canal de conducción que se modula por efecto de cambios químicos está más cerca de la superficie en donde ocurren dichos cambios químicos. De esta manera, se han utilizado los dispositivos tipo HEMTs como sensores químicos de pH (ISFETs), y se ha comprobado la mayor sensibilidad (variación de corriente frente a cambios de pH, Ids/pH) en los sensores basados en AlN/GaN frente a los basados en AlGaN/GaN. La mayor sensibilidad es incluso más patente en aplicaciones en las que no se utiliza un electrodo de referencia. Se han fabricado y caracterizado dispositivos ISFET similares utilizando capas compactas de InN. Estos sensores presentan peor estabilidad que los basados en Al(Ga)N/GaN, aunque la sensibilidad superficial al pH era la misma (Vgs/pH), y su sensibilidad en terminos de corriente de canal (Ids/pH) arroja valores intermedios entre los ISFET basados en AlN/GaN y los valores de los basados en AlGaN/GaN. Para continuar con la comparación entre dispositivos basados en Al(Ga)N/GaN, se fabricaron ISFETs con el área sensible más pequeña (35 x 35 m2), de tamaño similar a los dispositivos destinados a las medidas de actividad celular. Sometiendo los dispositivos a pulsos de voltaje en su área sensible, la respuesta de los dispositivos de AlN presentaron menor ruido que los basados en AlGaN. El ruido en la corriente para dispositivos de AlN, donde el encapsulado no ha sido optimizado, fue tan bajo como 8.9 nA (valor rms), y el ruido equivalente en el potencial superficial 38.7 V. Estos valores son más bajos que los encontrados en los dispositivos típicos para la detección de actividad celular (basados en Si), y del orden de los mejores resultados encontrados en la literatura sobre AlGaN/GaN. Desde el punto de vista de la caracterización electro-química de las superficies de GaN e InN, se ha determinado su punto isoeléctrico. Dicho valor no había sido reportado en la literatura hasta el momento. El valor, determinado por medidas de “streaming potential”, es de 4.4 y 4 respectivamente. Este valor es una importante característica a tener en cuenta en sensores, en inmovilización electrostática o en la litografía coloidal. Esta última técnica se discute en esta memoria, y se aplica en el último bloque de investigación de esta Tesis (i.e. crecimiento ordenado). El último apartado de resultados experimentales de esta Tesis analiza el crecimiento selectivo de nanocolumnas ordenadas de GaN por MBE, utilizando mascaras de Ti con nanoagujeros. Se ha estudiado como los distintos parámetros de crecimiento (i.e. flujos de los elementos Ga y N, temperatura de crecimiento y diseño de la máscara) afectan a la selectividad y a la morfología de las nanocolumnas. Se ha conseguido con éxito el crecimiento selectivo sobre pseudosustratos de GaN con distinta orientación cristalina o polaridad; templates de GaN(0001)/zafiro, GaN(0001)/AlN/Si, GaN(000-1)/Si y GaN(11-20)/zafiro. Se ha verificado experimentalmente la alta calidad cristalina de las nanocolumnas ordenadas, y su mayor estabilidad térmica comparada con las capas compactas del mismo material. Las nanocolumnas ordenadas de nitruros del grupo III tienen una clara aplicación en el campo de la optoelectrónica, principalmente para nanoemisores de luz blanca. Sin embargo, en esta Tesis se proponen como alternativa a la utilización de capas compactas o nanocolumnas auto-ensambladas en sensores. Las nanocolumnas auto-ensambladas de GaN, debido a su alta razón superficie/volumen, son muy prometedoras en el campo de los sensores, pero su amplia dispersión en dimensiones (altura y diámetro) supone un problema para el procesado y funcionamiento de dispositivos reales. En ese aspecto, las nanocolumnas ordenadas son más robustas y homogéneas, manteniendo una alta relación superficie/volumen. Como primer experimento en el ámbito de los sensores, se ha estudiado como se ve afectada la emisión de fotoluminiscencia de las NCs ordenadas al estar expuestas al aire o al vacio. Se observa una fuerte caída en la intensidad de la fotoluminiscencia cuando las nanocolumnas están expuestas al aire (probablemente por la foto-adsorción de oxigeno en la superficie), como ya había sido documentado anteriormente en nanocolumnas auto-ensambladas. Este experimento abre el camino para futuros sensores basados en nanocolumnas ordenadas. Abstract This manuscript deals with the growth and characterization of Al(Ga)N/GaN heterostructures and GaN ordered nanocolumns, and their application in chemical sensors. The growth technique has been the plasma-assisted molecular beam epitaxy (PAMBE). In the case of Al(Ga)N/GaN heterostructures, barriers of different thickness and composition, from AlN (5 nm) to AlGaN (35 nm) have been grown. Besides the basic morphological, structural and electrical characterization of the layers, HEMT devices have been fabricated based on these layers. The best electrical characteristics (larger carriers concentration and mobility in the two dimensional electron gas) are those in AlGaN/GaN heterostructures with a medium thickness (around 20 nm). However, one of the goals of this Thesis has been to verify the advantages that sensors based on AlN/GaN (thickness around 7 nm) have compared to standard AlGaN/GaN, because the conduction channel to be modulated by chemical changes is closer to the sensitive area. In this way, HEMT devices have been used as chemical pH sensors (ISFETs), and the higher sensitivity (conductance change related to pH changes, Ids/pH) of AlN/GaN based sensors has been proved. The higher sensibility is even more obvious in application without reference electrode. Similar ISFETs devices have been fabricated based on InN compact layers. These devices show a poor stability, but its surface sensitivity to pH (Vgs/pH) and its sensibility (Ids/pH) yield values between the corresponding ones of AlN/GaN and AlGaN/GaN heterostructures. In order to a further comparison between Al(Ga)N/GaN based devices, ISFETs with smaller sensitive area (35 x 35 m2), similar to the ones used in cellular activity record, were fabricated and characterized. When the devices are subjected to a voltage pulse through the sensitive area, the response of AlN based devices shows lower noise than the ones based on AlGaN. The noise in the current of such a AlN based device, where the encapsulation has not been optimized, is as low as 8.9 nA (rms value), and the equivalent noise to the surface potential is 38.7 V. These values are lower than the found in typical devices used for cellular activity recording (based on Si), and in the range of the best published results on AlGaN/GaN. From the point of view of the electrochemical characterization of GaN and InN surfaces, their isoelectric point has been experimentally determined. Such a value is the first time reported for GaN and InN surfaces. These values are determined by “streaming potential”, being pH 4.4 and 4, respectively. Isoelectric point value is an important characteristic in sensors, electrostatic immobilization or in colloidal lithography. In particular, colloidal lithography has been optimized in this Thesis for GaN surfaces, and applied in the last part of experimental results (i.e. ordered growth). The last block of this Thesis is focused on the selective area growth of GaN nanocolumns by MBE, using Ti masks decorated with nanoholes. The effect of the different growth parameters (Ga and N fluxes, growth temperature and mask design) is studied, in particular their impact in the selectivity and in the morphology of the nanocolumns. Selective area growth has been successful performed on GaN templates with different orientation or polarity; GaN(0001)/sapphire, GaN(0001)/AlN/Si, GaN(000- 1)/Si and GaN(11-20)/sapphire. Ordered nanocolumns exhibit a high crystal quality, and a higher thermal stability (lower thermal decomposition) than the compact layers of the same material. Ordered nanocolumns based on III nitrides have a clear application in optoelectronics, mainly for white light nanoemitters. However, this Thesis proposes them as an alternative to compact layers and self-assembled nanocolumns in sensor applications. Self-assembled GaN nanocolumns are very appealing for sensor applications, due to their large surface/volume ratio. However, their large dispersion in heights and diameters are a problem in terms of processing and operation of real devices. In this aspect, ordered nanocolumns are more robust and homogeneous, keeping the large surface/volume ratio. As first experimental evidence of their sensor capabilities, ordered nanocolumns have been studied regarding their photoluminiscence on air and vacuum ambient. A big drop in the intensity is observed when the nanocolumns are exposed to air (probably because of the oxygen photo-adsortion), as was already reported in the case of self-assembled nanocolumns. This opens the way to future sensors based on ordered III nitrides nanocolumns.

Atmospheric Propagation at 100 and 300 GHz: Assessment of a Method to Identify Rainy Conditions during Radiosoundings

The influence of atmospheric gases and tropospheric phenomena becomes more relevant at frequencies within the THz band (100 GHz to 10 THz), severely affecting the propagation conditions. The use of radiosoundings in propagation studies is a well established measurement technique in order to collect information about the vertical structure of the atmosphere, from which gaseous and cloud attenuation can be estimated with the use of propagation models. However, some of these prediction models are not suitable to be used under rainy conditions. In the present study, a method to identify the presence of rainy conditions during radiosoundings is introduced, with the aim of filtering out these events from yearly statistics of predicted atmospheric attenuation. The detection procedure is based on the analysis of a set of parameters, some of them extracted from synoptical observations of weather (SYNOP reports) and other derived from radiosonde observations (RAOBs). The performance of the method has been evaluated under different climatic conditions, corresponding to three locations in Spain, where colocated rain gauge data were available. Rain events detected by the method have been compared with those precipitations identified by the rain gauge. The pertinence Received 26 June 2012, Accepted 31 July 2012, Scheduled 15 August 2012 * Corresponding author: Gustavo Adolfo Siles Soria (gsiles@grc.ssr.upm.es). 258 Siles et al. of the method is discussed on the basis of an analysis of cumulative distributions of total attenuation at 100 and 300 GHz. This study demonstrates that the proposed method can be useful to identify events probably associated to rainy conditions. Hence, it can be considered as a suitable algorithm in order to filter out this kind of events from annual attenuation statistics.

Fabrication of GaN nanorods by focused ion beam

Ordered arrays of III-Nitride nanocolumns are excellent candidates for the fabrication of nano-optoelectronic devices. Different technologies such as e-beam lithography or colloidal lithography, have been used to obtain ordered arrays. All these technologies have in common several processing steps that can affect the crystalline growth of the nanocolumns. In this work, we present a single lithographic step that permits to grow ordered GaN nanocolumns with different geometries. The patterning is based in the use of a focused ion beam with different doses. With this method has been possible to create GaN nanopillars and nanocylinders.

Atmospheric modelling of tritium forms transport: review of capabilities and R&D needs for the assessment of fusion facilities environmental impact

One of the key scrutiny issues of new coming energy era would be the environmental impact of fusion facilities managing one kg of tritium. The potential change of committed dose regulatory limits together with the implementation of nuclear design principles (As Low as Reasonably achievable - ALARA -, Defense in Depth -D-i-D-) for fusion facilities could strongly impact on the cost of deployment of coming fusion technology. Accurate modeling of environmental tritium transport forms (HT, HTO) for the assessment of fusion facility dosimetric impact in Accidental case appears as of major interest. This paper considers different short-term releases of tritium forms (HT and HTO) to the atmosphere from a potential fusion reactor located in the Mediterranean Basin. This work models in detail the dispersion of tritium forms and dosimetric impact of selected environmental patterns both inland and in-sea using real topography and forecast meteorological data-fields (ECMWF/FLEXPART). We explore specific values of this ratio in different levels and we examine the influence of meteorological conditions in the HTO behavior for 24 hours. For this purpose we have used a tool which consists on a coupled Lagrangian ECMWF/FLEXPART model useful to follow real time releases of tritium at 10, 30 and 60 meters together with hourly observations of wind (and in some cases precipitations) to provide a short-range approximation of tritium cloud behavior. We have assessed inhalation doses. And also HTO/HT ratios in a representative set of cases during winter 2010 and spring 2011 for the 3 air levels.

Análisis de las diferencias en el crecimiento vegetativo, en los componentes del rendimiento y en la composición de las uvas y vinos del cv. cabernet sauvignon (vitis vinifera L.), producidos por el déficit hídrico durante pre-envero y post-envero

La presente Tesis Doctoral se realizó con el fin de estimar conjuntamente la respuesta agronómica y fisiológica de la vid (Vitis vinifera L.), así como los efectos sobre la evolución de la maduración, composición y la calidad de la uva y del vino, bajo la aplicación de diferentes déficit hídricos en pre-envero y post-envero, dentro de un marco de referencia de cambio climático. La variación climática que prevén los estudios sobre el cambio climático, resulta un factor decisivo en la eficiencia del uso del agua en la vid. En zonas cálidas, las estrategias de cultivo del viñedo frente al cambio climático deben de ir dirigidas a atenuar sus efectos sobre el crecimiento y el desarrollo de la vid, haciéndose imprescindible el estudio pormenorizado del déficit hídrico como factor decisivo en la obtención de las uvas adecuadas, ya que son la clave indispensable para el éxito en la elaboración del vino, y de forma muy especial en los vinos enfocados a un sector de alta calidad. El ensayo se llevó a cabo en un viñedo comercial de Bodegas Licinia, en la Comunidad de Madrid, durante los años 2010 y 2011. La variedad estudiada fue Cabernet sauvignon / 41 B, plantada a un marco de plantación de 3 m x 1 m, con un guiado vertical de la vegetación. El dispositivo experimental fue totalmente al azar, y se establecieron 4 tratamientos experimentales con 4 grados de disponibilidad hídrica, déficit moderado continuo (T0,45-0,6), déficit severo continuo (T0-0,3), déficit severo después de envero (T0,45-0,3) y déficit severo antes de envero (T0-0,6). En cada tratamiento se distribuyeron 3 repeticiones. El año 2010 fue el más lluvioso de los años de ensayo, con 478 mm de precipitaciones anuales, lo que supuso 146 mm más que en el año 2011. Su distribución a lo largo del ciclo fue más homogénea en el año 2010, mientras que en 2011 las precipitaciones contabilizadas en el período de maduración de la uva fueron nulas. La temperatura media subió 0,9ºC en 2011, respecto a 2010 y en cuanto a la integral térmica eficaz, en 2011 se acumularon, desde el 1 de abril hasta el final de ciclo, 217 grados•día más que en 2010. El déficit hídrico en pre-envero, modificó notablemente el crecimiento vegetativo y la producción de cosecha de la parcela de ensayo, no así la fertilidad de las yemas. El tratamiento con mayor disponibilidad hídrica (T0,45-0,6) obtuvo el mayor peso de baya, y los tratamientos con menor déficit hídrico en pre-envero (T0,45-0,6 y T0,45-0,3) registraron los mayores rendimientos de cosecha, mientras que las menores tasas de cuajado correspondieron al tratamiento con un déficit severo continuo (T0-0,3). La parcela de ensayo se caracterizó por un exceso de vigor y un alto crecimiento vegetativo. El pH del mosto se vio afectado por el déficit hídrico, disminuyendo su valor en el tratamiento de déficit hídrico severo antes de envero (T0-0,6). Organolépticamente, no se percibieron diferencias significativas en los vinos elaborados en función del déficit hídrico, y respecto a su composición físico-química, solo existieron diferencias en la concentración de ácido L-Málico, con mayores concentraciones en los tratamientos sin déficit hídrico en pre-envero, T0,45-0,6 y T0,45-0,3. El déficit hídrico modificó notablemente el color del vino, aumentando los valores de las coordenadas CIELAB a* y b*, la luminosidad (L*), croma (C*) y tonalidad (H*), para los tratamientos con un déficit severo en pre-envero (T0-0,3 y T0-0,6) y disminuyendo estas en el tratamiento con mayor disponibilidad hídrica (T0,45-0,6). Del mismo modo, mediante el análisis de color por métodos tradicionales, IPT e IC de los vinos, aumentó en los tratamientos con mayor déficit hídrico en pre-envero (T0-0,3 y T0-0,6), respecto a los tratamientos de mayor disponibilidad (T0,45-0,6 y T0,45-0,3). La concentración de taninos de la baya en vendimia, no se vio afectada por el déficit hídrico, aunque sí estuvo relacionada positivamente con el tamaño de las bayas. Organolépticamente, los hollejos del año 2011 resultaron con menor frescura, acidez, afrutado, sensación herbácea e intensidad tánica, aunque con mayor astringencia respecto a 2010. Las pepitas fueron más astringentes y aromáticas pero menos crujientes, sin llegar a los niveles de madurez del año 2010. El catador relacionó los taninos con la calidad del vino, asociándolos con un mayor cuerpo, acidez, intensidad, equilibrio gustativo, amargor y menor astringencia en la fase gustativa. La concentración de taninos en los vinos se vio favorecida con el déficit hídrico en pre-envero y post-envero. Los tratamientos con mayor déficit hídrico en pre-envero, T0-0,6 y T0-0,3, obtuvieron las menores concentraciones de potasio en mostos y vinos. Las relaciones entre la concentración de potasio, ácido L-Málico y el porcentaje de color rojo puro (dA(%)) resultaron altamente significativas, de modo que las mayores tasas de potasio en el vino se asociaron a los valores más bajos de color rojo y a los mayores de ácido L-Málico. ABSTRACT The present Doctoral Thesis has been done in order to estimate the grapevine (Vitis vinifera L.) agronomic and physiologic performance or response as well as the impact in the grape and wine maturity, composition and quality evolution, with different water deficits. The variation in climate that the global warming studies for seen is a key factor for the grapevine water use efficiency. In warm areas the farming vineyards strategy to face the climatic change, should be focused on diminish the effects on the grapevine growth and development, so that the water deficit detailed analysis becomes decisive to obtain the appropriate grapes, that are the main subject for a successful wine production and especially for top quality wines. The trial was carried out in a commercial vineyard in Chinchón (Madrid), Licinia winery, during the 2010 and 2011 seasons. The grape variety studied was Cabernet Sauvignon grafted onto 41B with a vine spacing 3m x 1m trained as VSP. Experimental design consisted on 4 irrigation treatments with 3 replications totally randomized. Irrigation treatments were: moderate regulated deficit (T0,45-0,6), severe continuous deficit (T0-0,3), severe post-veraison deficit (T0,45-0,3) and severe pre veraison deficit (T0-0,6). The 2010 was rainier year than the 2011; Total annual rain in 2010 was 478 mm, which resulted in 146 mm more than in 2011. The distribution along the vine cycle was more homogeneous in the 2010, whereas precipitations in 2011 along the grape maturity period were nonexistent. The average temperature in 2011 was 0,9ºC higher than that of the 2010 and regarding to the thermal integral, in the 2011 from 1st April to the end of the growing cycle, was 217 degrees•day higher than that in 2010. Water deficit significantly modified the vegetative growth and yield but, it did not modified bud fertility. The treatment with the highest water availability (T0,45-0,6) got the highest berry size, the lowest berry set rates were found in the severe continuous deficit treatment (T0-0,3). The plot studied in this trial was characterized by both excessive vigour and vegetative growth. Water deficit modified the pH must by, reducing it in the severe water deficit during pre-veraison (T0-0,6). There were not differences in wine tasting between the water deficits treatments. Regarding to the physical-chemical composition, it only existed differences in the L-malic acid concentration, resulting higher concentrations in the water deficit pre-veraison treatments: T0,45-0,6 y T0,45-0,3. Water deficit significantly modified wine colour by, increasing the CIELAB coordinates a* and b*, the brightness (L*), croma (C*) and tonality (H*), in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), and reducing them in the in the moderate continuous water deficit ones (T0,45-0,6). By means of traditional wine colour parameters analyses, red colour percentage, TPI, they became higher in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), than in those with higher availability (T0,45-0,6 y T0,45-0,3). At harvest, berry tannins concentrations was not affected by the water deficit although it did in a positive way, in the berry size. Berry tasting in 2011, resulted in a lower freshness, acidity, fruity, herbaceous flavour and tannic intensity, but with higher astringency respect to the 2010 season. Seeds, in 2011, were more astringent and aromatic as in the 2010, but less crunchy, without getting to the point of maturity. The taster linked the tannins to wine quality, associating them with a higher bodiest wine, acidity, intensity, taste balance, bitterness and with a lower astringency in the tasting stage. Treatments with a higher water deficit up to veraison T0-0,6 y T0-0,3 got less musts and wines potassium concentration. The relation between L-malic acid and the full red color percentage (dA(%)), were highly related, resulting the higher potassium content the lower wine quality.

Effects of irrigation and time of application on the yield and quality of cv. Cabernet sauvignon in a warm climate

Mediterranean climate is characterized by hot summer, high evapotranspiration rates, and scarce precipitations (400 mm per year) during grapevine cycle. These extremely dry conditions affect vineyard productivity and sustainability. Supplementary irrigation is a needed practice in order to maintain yield and quality. Almost all Spanish grape growing regions are characterized by these within this context, especially in the center region, where this study was performed. The main objective of this work was to study the influence of irrigation on yield and quality. For this aim, we applied different levels of irrigation (mm of water applied) during different stages of growth and berry maturity. Four experimental treatments were applied considering the amount of water and the moment of the application: T1: Water irrigation (420 mm) applied from bloom to maturity. T2: Corresponded to the traditional irrigation scheduling, from preveraison to maturity (154 mm). T3: Water irrigation from bloom to preveraison, and water deficit from veraison to maturity (312 mm). T4: Irrigation applied from preveraison to maturity (230 mm) Experimental vineyard, cv. Cabernet Sauvignon, was located in a commercial vineyard (Bodegas Licinia S.L.) in the hot region of Morata de Tajuña (Madrid). The trial was performed during 2010 and 2011 seasons. Our results showed that yield increased from 2010 to 2011 in the treatments with a higher amount of water appli ed, T1 and T3 (24 and 10 % of yield increase respectively). This was mainly due to an increase in bud fertility (nº of bunches per shoot). Furthermore, sugar content was higher in T3 (27.3 ºBrix), followed by T2 (27 ºBrix). By contrast, T4 (irrigation from veraison) presented the lowest solid soluble concentration and the highest acidity. These results suggest that grapevine has an intrinsic capacity to adapt to its environment. However, this adaptation capacity should be evaluated considering the sensibility of quality parameters during the maturity period (acidity, pH, aroma, color...) and its impact on yield. Here, we demonstrated that a higher amount of water irrigation applied was no linked to a negative effect on quality.

Alteración del comportamiento hidráulico natural de la vertiente noreste de la marisma de El Rocío por efectos antrópicos

El geo-dinamismo torrencial es resultado de la incidencia de precipitaciones torrenciales en la cuenca hidrográfica, y se manifiesta por una intensificación del ciclo del agua (con la presencia de mayores volúmenes de escorrentía y la consiguiente aparición de repentinos y elevados caudales de avenida) e intensificación del ciclo de los sedimentos (mayor erosión del suelo, incremento del transporte de sedimentos en los cauces de drenaje y la formación de grades depósitos de sedimentos en el área dominada de la cuenca). Estos procesos naturales se pueden agravar si se realizan en la cuenca actuaciones que alteren sustancialmente su morfología; es el caso del arroyo del Partido, tributario a la marisma de El Rocío en el Parque Nacional de Doñana, cuyo encauzamiento del tramo final sobre su antiguo cono de sedimentación fue el causante de la formación de un nuevo cono de sedimentación sobre la marisma. Pero las intervenciones antrópicas también pueden dirigir el sistema hacia la estabilidad sedimentaria y el tramo final del arroyo del Partido ha experimentado asimismo actuaciones de carácter restaurador. El antiguo cono de sedimentación del arroyo del Partido es un lugar complejo en el que drenan también otros tres cursos que intercambian sus flujos con dicho arroyo durante las avenidas. Esta Memoria analiza cuatro situaciones del paraje objeto de estudio: la primera responde al estado original del lugar en cuestión (situación A); la segunda a la creada tras el encauzamiento del arroyo del Partido en 1981 (situación B); la tercera a la formada pasado un tiempo desde el encauzamiento, cuando el geo-dinamismo del lugar hizo sus efectos sobre el paraje en cuestión (situación C); y la cuarta la generada tras la restauración en el verano de 2006 del régimen hidráulico-sedimentario del arroyo del Partido con la Actuación núm. 3 del Proyecto Doñana 2005. Se han investigado los efectos que la alteración de la morfología del sistema de drenaje del antiguo cono de sedimentación del arroyo del Partido causa en los parámetros hidráulicos que desencadenan el geo-dinamismo torrencial. Para ello se han reproducido las condiciones morfológicas de las cuatro situaciones más representativas ya comentadas que ha experimentado el paraje en los últimos 30 años y que han condicionado el comportamiento de las avenidas torrenciales ocurridas en dicho periodo. En este contexto se ha elaborado un modelo hidrológico con el programa HECHMS a partir de la información disponible y un modelo hidrodinámico en 2D con el programa IBER; con este último se han comparado ocho escenarios característicos derivados de la incidencia de dos avenidas representativas de los eventos torrenciales de la zona sobre las morfologías contempladas. También se ha estudiado la tensión de arrastre de las avenidas dada su incidencia en el terreno sobre el que transitan, analizando de manera separada los efectos en los cuatro cauces de drenaje del antiguo cono de sedimentación y del resto de la superficie del mismo. La investigación realizada ha permitido describir minuciosamente el comportamiento de los drenajes locales del antiguo y complejo cono de sedimentación que bordea el noroeste de la marisma del Parque Nacional de Doñana, desde la marisma de El Rocío hasta la marisma gallega, lo que redundará en beneficio de la gestión del Parque Nacional de Doñana y de su entorno, y especialmente en la seguridad del perímetro oriental de la aldea de El Rocío. ABSTRACT The torrential geo-dynamism results from the effect of torrential precipitations on the hydrological watershed, and it shows ups with the intensification of the water cycle (with presence of higher volumes of run-off and the consequent appearance of sudden and high food flows) and intensification of the sediment cycle (higher soil erosion, increase of sediment transport in the drainage courses and the formation of big sediment deposits in the area downstream the watershed). These natural processes can worsen if actions that change the morphology of the watershed are carried out. It is the case of the Partido stream, tributary of the marsh of El Rocío in the Doñana National Park, whose channelization of the final stretch over its old alluvial fan was the cause of the formation of a new alluvial fan over the marsh. But human actions can also go toward the sediment stabilization, and the final stretch of the Partido stream has experienced restoration actions as well. The old alluvial fan of the Partido stream is a complex terrain where also other three courses exchange their flows during floods. This document analyses four situations of the area studied: the first corresponds to the original state of the place (situation A); the second is the state created after the channel of the Partido stream was built in 1981 (situation B); the third is the state formed after some time passed and the geo-dynamism caused effect in the channelization (situation C); and the forth situation is the one created after the restoration in summer of 2006 of the hydraulic-sedimentary regime of the Partido stream with de Action number 3 of the Doñana 2005 Project. It has been researched the effects that the alteration of the morphology of the drainage system of the old alluvial fan of the Partido stream causes to the hydraulic parameters that trigger the torrential geo-dynamism. For that, the morphologic conditions of the four more representative situations were reproduced. Those situations experienced in the area in the last 30 years have conditioned the behaviour of torrential floods in that period. In this context, a hydrologic model with HEC-HMS and a 2D hydro-dynamic model with IBER have been set up. With IBER, eight scenes have been compared resulting from the impact of two representative floods from torrential events in the region against the morphologies considered. Also, the shear stress of the floods on the terrain has been studied, analysing separately the effect in the four drainage courses of the old alluvial fan and in the rest of its surfaces. The research carried out has allowed describing in minute detail the behavior of the local drainages of the old and complex alluvial fan that border the northwest part of the marsh of Doñana National Park, from the marsh of El Rocío to the gallega marsh. This will result in benefit for the management of Doñana National Park and its surroundings, and especially for the safety of the eastern limit of El Rocío village.

Thermodynamic aproach to particle size distribution in granular media

The study of particulate systems is of great interest in many fields of science and technology. Soil, sediments, powders, granular materials, colloidal and particulate suspensions are examples of systems involving many size particles. For those systems, the statistical description of the particle size distribution (PSD), that is, the mathematical distribution that defines the relative amounts of particles present, sorted according to size, is a crutial issue. The PSD can be important in understanding soil hydraulic properties, the geological origin or sediments or the physical and chemical properties of granular materials and ceramics, among others.

Estudio de los efectos en el viñedo de la modificación del déficit hídrico continuo en los periodos anterior y posterior al envero (cv. Cabernet Sauvignon; Vitis vinifera L.)

En regiones semiáridas, con veranos cálidos, evapotranspiraciones elevadas, humedades relativas bajas, además de precipitaciones intermitentes y escasas (400 mm al año) que reducen la recarga del perfil en invierno, se puede ver afectada la productividad y sostenibilidad de los viñedos. Por eso en estas zonas puede ser necesario utilizar el riego suplementario para mantener la calidad y aumentar la productividad. En este marco de circunstancias es en el que se desarrolla la mayoría de la viticultura española, y en concreto en la zona centro donde se realizó el estudio. Con este trabajo se pretende estudiar la influencia del agua del riego, con distintas dosis y aplicada en diferentes fases de crecimiento y maduración de la baya, en la producción y calidad de la uva. Se estudió la influencia del déficit moderado continuo aplicado antes y después de envero, en el aprovechamiento de los recursos ambientales y en la respuesta del cv. Cabernet Sauvignon. El ensayo se desarrolló en 2010 y 2011 en la finca “La Alcoholera”, perteneciente a bodegas LICINIA S.L., ubicada en la localidad de Chinchón, Comunidad de Madrid, España. Durante 2010 y 2011 se realizaron estudios en cepas del cv. Cabernet Sauvignon (clon 15), injertadas sobre 41B y plantadas en 2005. Con poda corta en Cordón Royat unilateral de 80 cm de altura, y cuya vegetación alcanzó una altura de 97 cm. Las cepas del ensayo fueron conducidas verticalmente en espaldera (VSP), con 10 yemas por metro lineal. Las plantas dentro de la fila fueron separadas 1 m y la distancia de la calle fue de 3 m. La orientación de las filas norte – sur. Se plantearon cuatro tratamientos experimentales con diferentes dosis y momento de aplicación del riego. - T: Testigo. Déficit ligero, con un aporte continuado de agua desde floración (420 mm). - DMc: Déficit moderado continuo. Manejo del riego convencional, empezando en pre-envero (154 mm) - DM1: Déficit moderado a partir de pre-envero. Aporte de riego continuado desde floración reduciéndose la dosis de riego en pre-envero (312 mm). - DM2: Déficit moderado hasta pre-envero. Se empezó a regar a partir de preenvero (230 mm). Se observó que bajo condiciones de estrés hídrico leve, el crecimiento se reduce disminuyendo la migración de fotoasimilados hacia los órganos vegetativos. Generando menor área foliar en las plantas sometidas a déficit hídrico moderado entre floración y cuajado. Disminuyendo su consumo. En maduración la humedad del suelo dependió principalmente del riego aplicado y del consumo de la planta; dicho consumo dependió a la vez del desarrollo foliar del canopy y de la necesidad hídrica de la vid. El aumento del déficit hídrico disminuyó el contenido de agua en el suelo, lo que provocó diferencias en el estado hídrico y en el intercambio gaseoso de las hojas. En condiciones de déficit moderado, la fotosíntesis se encontró altamente correlacionada con el potencial hídrico foliar medido a mediodía solar. Además en condiciones de déficit moderado continuo la disponibilidad hídrica, la demanda atmosférica y el nivel de hidratación de las hojas, interaccionaron de forma compleja en la regulación estomática de las hojas, condicionando el intercambio gaseoso y la eficiencia en el uso del agua. Al aumentar el volumen de agua aplicado el peso de madera de poda por metro de fila fue superior. Las diferencias encontradas en el rendimiento fueron debidas a las diferencias en el peso de baya. El cual estuvo condicionado por la estrategia de riego, ya que, el déficit hídrico moderado antes de envero fue más crítico para el rendimiento que el déficit impuesto durante la madurez. Por otro lado, la biomasa dependió de la actividad fisiológica de la planta, la cual fue altamente dependiente de la disponibilidad hídrica. Déficit hídrico moderado aplicado de cuajado a envero, generó bayas más pequeñas y aumentó la relación hollejo:pulpa. El déficit moderado aplicado después de envero favoreció la acumulación de IPT y antocianos extraíbles, mejorando la calidad de la uva, pero disminuyó la acidez de la baya. El riego aplicado de envero a vendimia desaceleró la concentración de azúcares en bayas que fueron sometidas a déficit antes de pre-envero. ABSTRACT Mediterranean climate is characterized by hot summers, high evapotranspiration rates, and scarce precipitations (400 mm per year) during grapevine cycle. These extremely dry conditions affect vineyard productivity and sustainability. Supplementary irrigation is needed practice in order to maintain yield and quality. Almost all Spanish grape growing regions are characterized by these conditions, especially in the center region, where this trial was performed. The main objective of this work is to study the influence of water irrigation on yield and quality. For this aim, different levels of irrigation (mm of water applied) were applied during different stages of growth and berry maturity of Caberent Sauvignon grapevines. The work was conducted from 2010 to 2011 and located in Licinia (40º 12´ N, 3º 28´ W), Madrid, Spain. The cultivar utilized was Cabernet Sauvignon, clone 15 grafted onto rootstock 41B, planted in 2005. The vineyard was oriented north-south, with spacing on 3 meters between rows and 1 meter between plants. Vines were spurpruned to 10 buds per meter and trained in unilateral cordon with a height of 80 cm. Shoots were positioned vertically (VSP). Considering the amount of water and the moment of the application, four experimental treatments were applied: - T: Control sample. Slight deficit (420 mm) applied from bloom to maturity. - DMc: Continuous moderate deficit. Traditional irrigation: application of 154 mm of water from pre-veraison to maturity. - DM1: Deficit moderate from pre-veraison. Irrigation of 312 mm of water from bloom to pre-veraison. - DM2: Deficit moderate to pre-veraison. Irrigation of 230 mm of water from preveraison to maturity Under moderated water stress conditions it was seen than leaf growth decreases due to the reduction of migration of photo-assimilates to vegetative organs. Vines with moderate water deficit between flowering and ripening develop less leaf area and decrease its water consumption. During maturation of berries, soil moisture depends on irrigation and plant consumption. This consumption further depends on vegetation development and on the vine needs for water. By increasing water deficit, the water content in the soil decreases. This causes differences in leaf water status and in the gases exchange. Under moderate deficit conditions, photosynthesis was found highly correlated with midday leaf water potential. Further, atmospheric demand and the level of leaves hydration interact in complex ways in the stomatal regulation, which affects leaf gas exchange and the efficiency of water use. The amount of water applied is directly proportional to pruning weight. Changes in berry weight cause differences in yield ratios. The differences in berry weights are conditioned by the irrigation strategy, the moderate water deficit before veraison influences more than the deficit applied from veraison. Biomass generated for the plant depends on its physiological activity, which is highly related to the water availability. Moderate water deficit applied from fruit set to ripening generates smaller berries, increasing the pulp/skin ratio. Moderate deficit applied after veraison promotes the accumulation of extractables anthocyans and TPI. Despite this treatment improves color parameters of the grapes, it decreases its total acidity. Irrigation applied from veraison to harvest slows down sugar accumulation in berries compared to those under deficit before veraison conditions.