Alternative Assessment in Engineering Language Education: The case of the Technical University of Madrid

This article describes a research project involving students from nine different engineering degrees at the Technical university of Madrid. The purpose of the project was to analyze the use of peer and self assessment and the students? attitudes toward alternative assessment procedures.

Geochemistry and risk assessment of street dust in Luanda, Angola, a tropical urban environment

A total of 92 samples of street dust were collected in Luanda, Angola, were sieved below 100 μm, and analysed by ICP-MS for 35 elements after an aqua-regia digestion. The concentration and spatial heterogeneity of trace elements in the street dust of Luanda are generally lower than in most industrialized cities in the Northern hemisphere. These observations reveal a predominantly “natural” origin for the street dust in Luanda, which is also manifested in that some geochemical processes that occur in natural soils are preserved in street dust: the separation of uranium from thorium, and the retention of the former by carbonate materials, or the high correlation between arsenic and vanadium due to their common mode of adsorption on solid particles in the form of oxyanions. The only distinct anthropogenic fingerprint in the composition of Luanda's street dust is the association Pb–Cd–Sb–Cu (and to a lesser extent, Ba–Cr–Zn). The use of risk assessment strategies has proved helpful in identifying the routes of exposure to street dust and the trace elements therein of most concern in terms of potential adverse health effects. In Luanda the highest levels of risk seem to be associated (a) with the presence of As and Pb in the street dust and (b) with the route of ingestion of dust particles, for all the elements included in the study except Hg, for which inhalation of vapours presents a slightly higher risk than ingestion. However, given the large uncertainties associated with the estimates of toxicity values and exposure factors, and the absence of site-specific biometric factors, these results should be regarded as preliminary and further research should be undertaken before any definite conclusions regarding potential health effects are drawn.

Experiences in the assessment of the requirement management process

The focus of this paper is to outline the practical experiences and the lessons learned derived from the assessment of the requirements management process in two industrial case studies. Furthermore this paper explains the main structure of an alternative assessment approach that has been used in the appraisal of the two case studies. The assessment approach helped us to know the current state of the organizational requirement management process. We have to point out that these practical experiences and the lessons learned can be helpful to reduce risks and costs of the on-site assessment process.

MOIRA-PLUS use in decision making on the long-term management of contaminated freshwater bodies and catchments

In the mid-long-term after a nuclear accident, the contamination of drinking water sources, fish and other aquatic foodstuffs, irrigation supplies and people?s exposure during recreational activities may create considerable public concern, even though dose assessment may in certain situations indicate lesser importance than for other sources, as clearly experienced in the aftermath of past accidents. In such circumstances there are a number of available countermeasure options, ranging from specific chemical treatment of lakes to bans on fish ingestion or on the use of water for crop irrigation. The potential actions can be broadly grouped into four main categories, chemical, biological, physical and social. In some cases a combination of actions may be the optimal strategy and a decision support system (DSS) like MOIRA-PLUS can be of great help to optimise a decision. A further option is of course not to take any remedial actions, although this may also have significant socio-economic repercussions which should be adequately evaluated. MOIRA-PLUS is designed to allow for a reliable assessment of the long-term evolution of the radiological situation and of feasible alternative rehabilitation strategies, including an objective evaluation of their social, economic and ecological impacts in a rational and comprehensive manner. MOIRA-PLUS also features a decision analysis methodology, making use of multi-attribute analysis, which can take into account the preferences and needs of different types of stakeholders. The main functions and elements of the system are described summarily. Also the conclusions from end-user?s experiences with the system are discussed, including exercises involving the organizations responsible for emergency management and the affected services, as well as different local and regional stakeholders. MOIRAPLUS has proven to be a mature system, user friendly and relatively easy to set up. It can help to better decisionmaking by enabling a realistic evaluation of the complete impacts of possible recovery strategies. Also, the interaction with stakeholders has allowed identifying improvements of the system that have been recently implemented.

Cuestionarios online como herramienta de aprendizaje: comparación de resultados con diversos modelos de cuestionarios.

En este trabajo se comparan dos estrategias de evaluación a través de cuestionarios online: i) realizar un cuestionario de evaluación sumativa al final de cada bloque temático del curso o ii) permitir que, para cada bloque temático, el alumno pueda repetir varias veces un test (con realimentación de las respuestas correctas) y realizar un test similar después de esta fase de aprendizaje. Los resultados muestran varios beneficios de la segunda estrategia: una mayor participación de los alumnos hasta el final del semestre, una menor tasa de abandono de la asignatura y una mejor nota en los test. Sin embargo, para que el aprendizaje sea efectivo en el caso de repetir varias veces un test, se necesita un banco de preguntas suficientemente amplio para que exista una probabilidad baja de que las preguntas no se repitan. Este problema se ha resuelto utilizando la posibilidad que presentan algunas plataformas de gestión del aprendizaje de generar automáticamente variantes numéricas de una misma pregunta. Por último se observa un grado de acuerdo muy elevado por parte de los alumnos con el peso que los resultados de los tests tienen en la nota final del curso, en el caso bajo estudio. Abstract: This work compares two different assessment strategies through online tests: i) summative assessment tests at the end of each part of the course or ii) the students can do selfassessment tests (with feedback) prior to a summative assessment test at the end of each part of the course. Results show that the second strategy yields several benefits: an increment in student participation till the end of the semester, a reduction in the drop-out rate and an increase in the mean test marks. However, a large item bank is necessary to effectively implement this second strategy. This problem has been addressed by using the automatic item generation facility offered by several learning management systems. Finally, a high proportion of the students agree with the weight proposed for these tests in the final course mark.

Manejo de memoria en programación lógica con tabulación

Los lenguajes de programación son el idioma que los programadores usamos para comunicar a los computadores qué queremos que hagan. Desde el lenguaje ensamblador, que traduce una a una las instrucciones que interpreta un computador hasta lenguajes de alto nivel, se ha buscado desarrollar lenguajes más cercanos a la forma de pensar y expresarse de los humanos. Los lenguajes de programación lógicos como Prolog utilizan a su vez el lenguaje de la lógica de 1er orden de modo que el programador puede expresar las premisas del problema que se quiere resolver sin preocuparse del cómo se va a resolver dicho problema. La resolución del problema se equipara a encontrar una deducción del objetivo a alcanzar a partir de las premisas y equivale a lo que entendemos por la ejecución de un programa. Ciao es una implementación de Prolog (http://www.ciao-lang.org) y utiliza el método de resolución SLD, que realiza el recorrido de los árboles de decisión en profundidad(depth-first) lo que puede derivar en la ejecución de una rama de busqueda infinita (en un bucle infinito) sin llegar a dar respuestas. Ciao, al ser un sistema modular, permite la utilización de extensiones para implementar estrategias de resolución alternativas como la tabulación (OLDT). La tabulación es un método alternativo que se basa en memorizar las llamadas realizadas y sus respuestas para no repetir llamadas y poder usar las respuestas sin recomputar las llamadas. Algunos programas que con SLD entran en un bucle infinito, gracias a la tabulación dán todas las respuestas y termina. El modulo tabling es una implementación de tabulación mediante el algoritmo CHAT. Esta implementación es una versión beta que no tiene implementado un manejador de memoria. Entendemos que la gestión de memoria en el módulo de tabling tiene gran importancia, dado que la resolución con tabulación permite reducir el tiempo de computación (al no repetir llamadas), aumentando los requerimientos de memoria (para guardar las llamadas y las respuestas). Por lo tanto, el objetivo de este trabajo es implementar un mecanismo de gestión de la memoria en Ciao con el módulo tabling cargado. Para ello se ha realizado la implementación de: Un mecanismo de captura de errores que: detecta cuando el computador se queda sin memoria y activa la reinicialización del sitema. Un procedimiento que ajusta los punteros del modulo de tabling que apuntan a la WAM tras un proceso de realojo de algunas de las áreas de memoria de la WAM. Un gestor de memoria del modulo de tabling que detecta c realizar una ampliación de las áreas de memoria del modulo de tabling, realiza la solicitud de más memoria y realiza el ajuste de los punteros. Para ayudar al lector no familiarizado con este tema, describimos los datos que Ciao y el módulo de tabling alojan en las áreas de memoria dinámicas que queremos gestionar. Los casos de pruebas desarrollados para evaluar la implementación del gestor de memoria, ponen de manifiesto que: Disponer de un gestor de memoria dinámica permite la ejecución de programas en un mayor número de casos. La política de gestión de memoria incide en la velocidad de ejecución de los programas. ---ABSTRACT---Programming languages are the language that programmers use in order to communicate to computers what we want them to do. Starting from the assembly language, which translates one by one the instructions to the computer, and arriving to highly complex languages, programmers have tried to develop programming languages that resemble more closely the way of thinking and communicating of human beings. Logical programming languages, such as Prolog, use the language of logic of the first order so that programmers can express the premise of the problem that they want to solve without having to solve the problem itself. The solution to the problem is equal to finding a deduction of the objective to reach starting from the premises and corresponds to what is usually meant as the execution of a program. Ciao is an implementation of Prolog (http://www.ciao-lang.org) and uses the method of resolution SLD that carries out the path of the decision trees in depth (depth-frist). This can cause the execution of an infinite searching branch (an infinite loop) without getting to an answer. Since Ciao is a modular system, it allows the use of extensions to implement alternative resolution strategies, such as tabulation (OLDT). Tabulation is an alternative method that is based on the memorization of executions and their answers, in order to avoid the repetition of executions and to be able to use the answers without reexecutions. Some programs that get into an infinite loop with SLD are able to give all the answers and to finish thanks to tabulation. The tabling package is an implementation of tabulation through the algorithm CHAT. This implementation is a beta version which does not present a memory handler. The management of memory in the tabling package is highly important, since the solution with tabulation allows to reduce the system time (because it does not repeat executions) and increases the memory requirements (in order to save executions and answers). Therefore, the objective of this work is to implement a memory management mechanism in Ciao with the tabling package loaded. To achieve this goal, the following implementation were made: An error detection system that reveals when the computer is left without memory and activate the reinizialitation of the system. A procedure that adjusts the pointers of the tabling package which points to the WAM after a process of realloc of some of the WAM memory stacks. A memory manager of the tabling package that detects when it is necessary to expand the memory stacks of the tabling package, requests more memory, and adjusts the pointers. In order to help the readers who are not familiar with this topic, we described the data which Ciao and the tabling package host in the dynamic memory stacks that we want to manage. The test cases developed to evaluate the implementation of the memory manager show that: A manager for the dynamic memory allows the execution of programs in a larger number of cases. Memory management policy influences the program execution speed.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

Hybridizing concentrated solar power (CSP) with biogas and biomethane as an alternative to natural gas: Analysis of environmental performance using LCA

Concentrating Solar Power (CSP) plants typically incorporate one or various auxiliary boilers operating in parallel to the solar field to facilitate start up operations, provide system stability, avoid freezing of heat transfer fluid (HTF) and increase generation capacity. The environmental performance of these plants is highly influenced by the energy input and the type of auxiliary fuel, which in most cases is natural gas (NG). Replacing the NG with biogas or biomethane (BM) in commercial CSP installations is being considered as a means to produce electricity that is fully renewable and free from fossil inputs. Despite their renewable nature, the use of these biofuels also generates environmental impacts that need to be adequately identified and quantified. This paper investigates the environmental performance of a commercial wet-cooled parabolic trough 50 MWe CSP plant in Spain operating according to two strategies: solar-only, with minimum technically viable energy non-solar contribution; and hybrid operation, where 12 % of the electricity derives from auxiliary fuels (as permitted by Spanish legislation). The analysis was based on standard Life Cycle Assessment (LCA) methodology (ISO 14040-14040). The technical viability and the environmental profile of operating the CSP plant with different auxiliary fuels was evaluated, including: NG; biogas from an adjacent plant; and BM withdrawn from the gas network. The effect of using different substrates (biowaste, sewage sludge, grass and a mix of biowaste with animal manure) for the production of the biofuels was also investigated. The results showed that NG is responsible for most of the environmental damage associated with the operation of the plant in hybrid mode. Replacing NG with biogas resulted in a significant improvement of the environmental performance of the installation, primarily due to reduced impact in the following categories: natural land transformation, depletion of fossil resources, and climate change. However, despite the renewable nature of the biofuels, other environmental categories like human toxicity, eutrophication, acidification and marine ecotoxicity scored higher when using biogas and BM.

What role does climate change play in agricultural market uncertainty? An integrated assessment taking into account market-driven adjustments

Recent studies point to climate change being one of the long-term drivers of agricultural market uncertainty. To advance in the understanding of the influence of climate change on future agricultural market developments, we compare a reference scenario for 2030 with alternative simulation scenarios that differ regarding: (1) emission scenarios; (2) climate projections; and (3) the consideration of carbon fertilization effects. For each simulation scenario, the CAPRI model provides global and EU-wide impacts of climate change on agricultural markets. Results show that climate change would considerably affect agrifood markets up to 2030. Nevertheless, market-driven adaptation strategies (production intensification, trade adjustments) would soften the impact of yield shocks on supply and demand. As a result, regional changes in production would be lower than foreseen by other studies focused on supply effects.

Assessment of energy efficiency and sustainability scenarios in the transport system

Background Energy Policy is one of the main drivers of Transport Policy. A number of strategies to reduce current energy consumption trends in the transport sector have been designed over the last decades. They include fuel taxes, more efficient technologies and changing travel behavior through demand regulation. But energy market has a high degree of uncertainty and the effectiveness of those policy options should be assessed. Methods A scenario based assessment methodology has been developed in the frame of the EU project STEPS. It provides an integrated view of Energy efficiency, environment, social and competitiveness impacts of the different strategies. It has been applied at European level and to five specific Regions. Concluding remarks The results are quite site specific dependent. However they show that regulation measures appear to be more effective than new technology investments. Higher energy prices could produce on their turn a deterioration of competitiveness and a threat for social goals.

Estrategias innovadoras para la gestión del riesgo de sequía en sistemas ganaderos extensivos

La vulnerabilidad de los sistemas ganaderos de pastoreo pone en evidencia la necesidad de herramientas para evaluar y mitigar los efectos de la sequía. El avance en la teledetección ha despertado el interés por explotar potenciales aplicaciones, y está dando lugar a un intenso desarrollo de innovaciones en distintos campos. Una de estas áreas es la gestión del riesgo climático, en donde la utilización de índices de vegetación permite la evaluación de la sequía. En esta investigación, se analiza el impacto de la sequía y se evalúa el potencial de nuevas tecnologías como la teledetección para la gestión del riesgo de sequía en sistemas de ganadería extensiva. Para ello, se desarrollan tres aplicaciones: (i) evaluar el impacto económico de la sequía en una explotación ganadera extensiva de la dehesa de Andalucía, (ii) elaborar mapas de vulnerabilidad a la sequía en pastos de Chile y (iii) diseñar y evaluar el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. En la primera aplicación, se diseña un modelo dinámico y estocástico que integra aspectos climáticos, ecológicos, agronómicos y socioeconómicos para evaluar el riesgo de sequía. El modelo simula una explotación ganadera tipo de la dehesa de Andalucía para el período 1999-2010. El método de Análisis Histórico y la simulación de MonteCarlo se utilizan para identificar los principales factores de riesgo de la explotación, entre los que destacan, los periodos de inicios del verano e inicios de invierno. Los resultados muestran la existencia de un desfase temporal entre el riesgo climático y riesgo económico, teniendo este último un periodo de duración más extenso en el tiempo. También, revelan que la intensidad, frecuencia y duración son tres atributos cruciales que determinan el impacto económico de la sequía. La estrategia de reducción de la carga ganadera permite aminorar el riesgo, pero conlleva una disminución en el margen bruto de la explotación. La segunda aplicación está dedicada a la elaboración de mapas de vulnerabilidad a la sequia en pastos de Chile. Para ello, se propone y desarrolla un índice de riesgo económico (IRESP) sencillo de interpretar y replicable, que integra factores de riesgo y estrategias de adaptación para obtener una medida del Valor en Riesgo, es decir, la máxima pérdida esperada en un año con un nivel de significación del 5%.La representación espacial del IRESP pone en evidencia patrones espaciales y diferencias significativas en la vulnerabilidad a la sequía a lo largo de Chile. Además, refleja que la vulnerabilidad no siempre esta correlacionada con el riesgo climático y demuestra la importancia de considerar las estrategias de adaptación. Las medidas de autocorrelación espacial revelan que el riesgo sistémico es considerablemente mayor en el sur que en el resto de zonas. Los resultados demuestran que el IRESP transmite información pertinente y, que los mapas de vulnerabilidad pueden ser una herramienta útil en el diseño de políticas y toma de decisiones para la gestión del riesgo de sequía. La tercera aplicación evalúa el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. Para lo cual, se desarrolla un modelo estocástico para estimar la prima actuarialmente justa del seguro y se proponen y evalúan pautas alternativas para mejorar el diseño del contrato. Se aborda el riesgo base, el principal problema de los seguros indexados identificado en la literatura y, que está referido a la correlación imperfecta del índice con las pérdidas de la explotación. Para ello, se sigue un enfoque bayesiano que permite evaluar el impacto en el riesgo base de las pautas de diseño propuestas: i) una zonificación por clúster que considera aspectos espacio-temporales, ii) un período de garantía acotado a los ciclos fenológicos del pasto y iii) umbral de garantía. Los resultados muestran que tanto la zonificación como el periodo de garantía reducen el riesgo base considerablemente. Sin embargo, el umbral de garantía tiene un efecto ambiguo sobre el riesgo base. Por otra parte, la zonificación por clúster contribuye a aminorar el riesgo sistémico que enfrentan las aseguradoras. Estos resultados han puesto de manifiesto que un buen diseño de contrato puede tener un doble dividendo, por un lado aumentar su utilidad y, por otro, reducir el coste del seguro. Un diseño de contrato eficiente junto con los avances en la teledetección y un adecuado marco institucional son los pilares básicos para el buen funcionamiento de un programa de seguro. Las nuevas tecnologías ofrecen un importante potencial para la innovación en la gestión del riesgo climático. Los avances en este campo pueden proporcionar importantes beneficios sociales en los países en desarrollo y regiones vulnerables, donde las herramientas para gestionar eficazmente los riesgos sistémicos como la sequía pueden ser de gran ayuda para el desarrollo. The vulnerability of grazing livestock systems highlights the need for tools to assess and mitigate the adverse impact of drought. The recent and rapid progress in remote sensing has awakened an interest for tapping into potential applications, triggering intensive efforts to develop innovations in a number of spheres. One of these areas is climate risk management, where the use of vegetation indices facilitates assessment of drought. This research analyzes drought impacts and evaluates the potential of new technologies such as remote sensing to manage drought risk in extensive livestock systems. Three essays in drought risk management are developed to: (i) assess the economic impact of drought on a livestock farm in the Andalusian Dehesa, (ii) build drought vulnerability maps in Chilean grazing lands, and (iii) design and evaluate the potential of an index insurance policy to address the risk of drought in grazing lands in Coquimbo, Chile. In the first essay, a dynamic and stochastic farm model is designed combining climate, agronomic, socio-economic and ecological aspects to assess drought risk. The model is developed to simulate a representative livestock farm in the Dehesa of Andalusia for the time period 1999-2010. Burn analysis and MonteCarlo simulation methods are used to identify the significance of various risk sources at the farm. Most notably, early summer and early winter are identified as periods of peak risk. Moreover, there is a significant time lag between climate and economic risk and this later last longer than the former. It is shown that intensity, frequency and duration of the drought are three crucial attributes that shape the economic impact of drought. Sensitivity analysis is conducted to assess the sustainability of farm management strategies and demonstrates that lowering the stocking rate reduces farmer exposure to drought risk but entails a reduction in the expected gross margin. The second essay, mapping drought vulnerability in Chilean grazing lands, proposes and builds an index of economic risk (IRESP) that is replicable and simple to interpret. This methodology integrates risk factors and adaptation strategies to deliver information on Value at Risk, maximum expected losses at 5% significance level. Mapping IRESP provides evidence about spatial patterns and significant differences in drought vulnerability across Chilean grazing lands. Spatial autocorrelation measures reveal that systemic risk is considerably larger in the South as compared to Northern or Central Regions. Furthermore, it is shown that vulnerability is not necessarily correlated with climate risk and that adaptation strategies do matter. These results show that IRESP conveys relevant information and that vulnerability maps may be useful tools to assess policy design and decision-making in drought risk management. The third essay develops a stochastic model to estimate the actuarially fair premium and evaluates the potential of an indexed insurance policy to manage drought risk in Coquimbo, a relevant livestock farming region of Chile. Basis risk refers to the imperfect correlation of the index and farmer loses and is identified in the literature as a main limitation of index insurance. A Bayesian approach is proposed to assess the impact on basis risk of alternative guidelines in contract design: i) A cluster zoning that considers space-time aspects, ii) A guarantee period bounded to fit phenological cycles, and iii) the triggering index threshold. Results show that both the proposed zoning and guarantee period considerably reduces basis risk. However, the triggering index threshold has an ambiguous effect on basis risk. On the other hand, cluster zoning contributes to ameliorate systemic risk faced by the insurer. These results highlighted that adequate contract design is important and may result in double dividend. On the one hand, increasing farmers’ utility and, secondly, reducing the cost of insurance. An efficient contract design coupled with advances in remote sensing and an appropriate institutional framework are the basis for an efficient operation of an insurance program. The new technologies offer significant potential for innovation in climate risk managements. Progress in this field is capturing increasing attention and may provide important social gains in developing countries and vulnerable regions where the tools to efficiently manage systemic risks, such as drought, may be a means to foster development.

Conceptual framework for the design, implementation and validation of psychomotor skills’ assessment systems in minimally invasive surgery

Las técnicas de cirugía de mínima invasión (CMI) se están consolidando hoy en día como alternativa a la cirugía tradicional, debido a sus numerosos beneficios para los pacientes. Este cambio de paradigma implica que los cirujanos deben aprender una serie de habilidades distintas de aquellas requeridas en cirugía abierta. El entrenamiento y evaluación de estas habilidades se ha convertido en una de las mayores preocupaciones en los programas de formación de cirujanos, debido en gran parte a la presión de una sociedad que exige cirujanos bien preparados y una reducción en el número de errores médicos. Por tanto, se está prestando especial atención a la definición de nuevos programas que permitan el entrenamiento y la evaluación de las habilidades psicomotoras en entornos seguros antes de que los nuevos cirujanos puedan operar sobre pacientes reales. Para tal fin, hospitales y centros de formación están gradualmente incorporando instalaciones de entrenamiento donde los residentes puedan practicar y aprender sin riesgos. Es cada vez más común que estos laboratorios dispongan de simuladores virtuales o simuladores físicos capaces de registrar los movimientos del instrumental de cada residente. Estos simuladores ofrecen una gran variedad de tareas de entrenamiento y evaluación, así como la posibilidad de obtener información objetiva de los ejercicios. Los diferentes estudios de validación llevados a cabo dan muestra de su utilidad; pese a todo, los niveles de evidencia presentados son en muchas ocasiones insuficientes. Lo que es más importante, no existe un consenso claro a la hora de definir qué métricas son más útiles para caracterizar la pericia quirúrgica. El objetivo de esta tesis doctoral es diseñar y validar un marco de trabajo conceptual para la definición y validación de entornos para la evaluación de habilidades en CMI, en base a un modelo en tres fases: pedagógica (tareas y métricas a emplear), tecnológica (tecnologías de adquisición de métricas) y analítica (interpretación de la competencia en base a las métricas). Para tal fin, se describe la implementación práctica de un entorno basado en (1) un sistema de seguimiento de instrumental fundamentado en el análisis del vídeo laparoscópico; y (2) la determinación de la pericia en base a métricas de movimiento del instrumental. Para la fase pedagógica se diseñó e implementó un conjunto de tareas para la evaluación de habilidades psicomotoras básicas, así como una serie de métricas de movimiento. La validación de construcción llevada a cabo sobre ellas mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. Adicionalmente, los resultados obtenidos en la validación de apariencia fueron en general positivos en todos los grupos considerados (noveles, residentes, expertos). Para la fase tecnológica, se introdujo el EVA Tracking System, una solución para el seguimiento del instrumental quirúrgico basado en el análisis del vídeo endoscópico. La precisión del sistema se evaluó a 16,33ppRMS para el seguimiento 2D de la herramienta en la imagen; y a 13mmRMS para el seguimiento espacial de la misma. La validación de construcción con una de las tareas de evaluación mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. La validación concurrente con el TrEndo® Tracking System por su parte presentó valores altos de correlación para 8 de las 9 métricas analizadas. Finalmente, para la fase analítica se comparó el comportamiento de tres clasificadores supervisados a la hora de determinar automáticamente la pericia quirúrgica en base a la información de movimiento del instrumental, basados en aproximaciones lineales (análisis lineal discriminante, LDA), no lineales (máquinas de soporte vectorial, SVM) y difusas (sistemas adaptativos de inferencia neurodifusa, ANFIS). Los resultados muestran que en media SVM presenta un comportamiento ligeramente superior: 78,2% frente a los 71% y 71,7% obtenidos por ANFIS y LDA respectivamente. Sin embargo las diferencias estadísticas medidas entre los tres no fueron demostradas significativas. En general, esta tesis doctoral corrobora las hipótesis de investigación postuladas relativas a la definición de sistemas de evaluación de habilidades para cirugía de mínima invasión, a la utilidad del análisis de vídeo como fuente de información y a la importancia de la información de movimiento de instrumental a la hora de caracterizar la pericia quirúrgica. Basándose en estos cimientos, se han de abrir nuevos campos de investigación que contribuyan a la definición de programas de formación estructurados y objetivos, que puedan garantizar la acreditación de cirujanos sobradamente preparados y promocionen la seguridad del paciente en el quirófano. Abstract Minimally invasive surgery (MIS) techniques have become a standard in many surgical sub-specialties, due to their many benefits for patients. However, this shift in paradigm implies that surgeons must acquire a complete different set of skills than those normally attributed to open surgery. Training and assessment of these skills has become a major concern in surgical learning programmes, especially considering the social demand for better-prepared professionals and for the decrease of medical errors. Therefore, much effort is being put in the definition of structured MIS learning programmes, where practice with real patients in the operating room (OR) can be delayed until the resident can attest for a minimum level of psychomotor competence. To this end, skills’ laboratory settings are being introduced in hospitals and training centres where residents may practice and be assessed on their psychomotor skills. Technological advances in the field of tracking technologies and virtual reality (VR) have enabled the creation of new learning systems such as VR simulators or enhanced box trainers. These systems offer a wide range of tasks, as well as the capability of registering objective data on the trainees’ performance. Validation studies give proof of their usefulness; however, levels of evidence reported are in many cases low. More importantly, there is still no clear consensus on topics such as the optimal metrics that must be used to assess competence, the validity of VR simulation, the portability of tracking technologies into real surgeries (for advanced assessment) or the degree to which the skills measured and obtained in laboratory environments transfer to the OR. The purpose of this PhD is to design and validate a conceptual framework for the definition and validation of MIS assessment environments based on a three-pillared model defining three main stages: pedagogical (tasks and metrics to employ), technological (metric acquisition technologies) and analytical (interpretation of competence based on metrics). To this end, a practical implementation of the framework is presented, focused on (1) a video-based tracking system and (2) the determination of surgical competence based on the laparoscopic instruments’ motionrelated data. The pedagogical stage’s results led to the design and implementation of a set of basic tasks for MIS psychomotor skills’ assessment, as well as the definition of motion analysis parameters (MAPs) to measure performance on said tasks. Validation yielded good construct results for parameters such as time, path length, depth, average speed, average acceleration, economy of area and economy of volume. Additionally, face validation results showed positive acceptance on behalf of the experts, residents and novices. For the technological stage the EVA Tracking System is introduced. EVA provides a solution for tracking laparoscopic instruments from the analysis of the monoscopic video image. Accuracy tests for the system are presented, which yielded an average RMSE of 16.33pp for 2D tracking of the instrument on the image and of 13mm for 3D spatial tracking. A validation experiment was conducted using one of the tasks and the most relevant MAPs. Construct validation showed significant differences for time, path length, depth, average speed, average acceleration, economy of area and economy of volume; especially between novices and residents/experts. More importantly, concurrent validation with the TrEndo® Tracking System presented high correlation values (>0.7) for 8 of the 9 MAPs proposed. Finally, the analytical stage allowed comparing the performance of three different supervised classification strategies in the determination of surgical competence based on motion-related information. The three classifiers were based on linear (linear discriminant analysis, LDA), non-linear (support vector machines, SVM) and fuzzy (adaptive neuro fuzzy inference systems, ANFIS) approaches. Results for SVM show slightly better performance than the other two classifiers: on average, accuracy for LDA, SVM and ANFIS was of 71.7%, 78.2% and 71% respectively. However, when confronted, no statistical significance was found between any of the three. Overall, this PhD corroborates the investigated research hypotheses regarding the definition of MIS assessment systems, the use of endoscopic video analysis as the main source of information and the relevance of motion analysis in the determination of surgical competence. New research fields in the training and assessment of MIS surgeons can be proposed based on these foundations, in order to contribute to the definition of structured and objective learning programmes that guarantee the accreditation of well-prepared professionals and the promotion of patient safety in the OR.

Development of mathematical models to elaborate strategies, select alternatives and development of plans for adaptation of communities to climate change in different geographical areas including costs to implement it.

There is evidence that the climate changes and that now, the change is influenced and accelerated by the CO2 augmentation in atmosphere due to combustion by humans. Such ?Climate change? is on the policy agenda at the global level, with the aim of understanding and reducing its causes and to mitigate its consequences. In most countries and international organisms UNO (e.g. Rio de Janeiro 1992), OECD, EC, etc . . . the efforts and debates have been directed to know the possible causes, to predict the future evolution of some variable conditioners, and trying to make studies to fight against the effects or to delay the negative evolution of such. The Protocol of Kyoto 1997 set international efforts about CO2 emissions, but it was partial and not followed e.g. by USA and China . . . , and in Durban 2011 the ineffectiveness of humanity on such global real challenges was set as evident. Among all that, the elaboration of a global model was not boarded that can help to choose the best alternative between the feasible ones, to elaborate the strategies and to evaluate the costs, and the authors propose to enter in that frame for study. As in all natural, technological and social changes, the best-prepared countries will have the best bear and the more rapid recover. In all the geographic areas the alternative will not be the same one, but the model must help us to make the appropriated decision. It is essential to know those areas that are more sensitive to the negative effects of climate change, the parameters to take into account for its evaluation, and comprehensive plans to deal with it. The objective of this paper is to elaborate a mathematical model support of decisions, which will allow to develop and to evaluate alternatives of adaptation to the climatic change of different communities in Europe and Latin-America, mainly in especially vulnerable areas to the climatic change, considering in them all the intervening factors. The models will consider criteria of physical type (meteorological, edaphic, water resources), of use of the ground (agriculturist, forest, mining, industrial, urban, tourist, cattle dealer), economic (income, costs, benefits, infrastructures), social (population), politician (implementation, legislation), educative (Educational programs, diffusion) and environmental, at the present moment and the future. The intention is to obtain tools for aiding to get a realistic position for these challenges, which are an important part of the future problems of humanity in next decades.

Development of mathematical models to elaborate strategies, to select alternatives and the development of plans for the adaptation of communities to climate change in different geographical areas including costs to implement it

Climate change is on the policy agenda at the global level, with the aim of understanding and reducing its causes and to mitigate its consequences. In most of the countries and international organisms UNO, OECD, EC, etc … the efforts and debates have been directed to know the possible causes, to predict the future evolution of some variable conditioners, and trying to make studies to fight against the effects or to delay the negative evolution of such. Nevertheless, the elaboration of a global model was not boarded that can help to choose the best alternative between the feasible ones, to elaborate the strategies and to evaluate the costs. As in all natural, technological and social changes, the best-prepared countries will have the best bear and the more rapid recover. In all the geographic areas the alternative will not be the same one, but the model should help us to make the appropriated decision. It is essential to know those areas that are more sensitive to the negative effects of climate change, the parameters to take into account for its evaluation, and comprehensive plans to deal with it. The objective of this paper is to elaborate a mathematical model support of decisions, that will allow to develop and to evaluate alternatives of adaptation to the climatic change of different communities in Europe and Latin-America, mainly, in vulnerable areas to the climatic change, considering in them all the intervening factors. The models will take into consideration criteria of physical type (meteorological, edaphic, water resources), of use of the ground (agriculturist, forest, mining, industrial, urban, tourist, cattle dealer), economic (income, costs, benefits, infrastructures), social (population), politician (implementation, legislation), educative (Educational programs, diffusion), sanitary and environmental, at the present moment and the future.

Decarbonization of toll plazas: impact assessment of toll collection system management

Transport climate change impacts have become a worldwide concern. The use of Intelligent Transport Systems (ITS) could contribute to a more effective use of resources in toll road networks. Management of toll plazas is central to the reduction of greenhouse gas (GHG) emissions, as it is there that bottlenecks and congestion occur. This study focuses on management strategies aimed at reducing climate change impacts of toll plazas by managing toll collection systems. These strategies are based on the use of different collection system technologies – Electronic Toll Collection (ETC) and Open Road Tolling (ORT) – and on queue management. The carbon footprint of various toll plazas is determined by a proposed integrated methodology which estimates the carbon dioxide (CO2) emissions of the different operational stages at toll plazas (deceleration, service time, acceleration, and queuing) for the different toll collection systems. To validate the methodology, two main-line toll plazas of a Spanish toll highway were evaluated. The findings reveal that the application of new technologies to toll collection systems is an effective management strategy from an environmental point of view. The case studies revealed that ORT systems lead to savings of up to 70% of CO2 emissions at toll plazas, while ETC systems save 20% comparing to the manual ones. Furthermore, queue management can offer a 16% emissions savings when queue time is reduced by 116 seconds. The integrated methodology provides an efficient environmental management tool for toll plazas. The use of new technologies is the future of the decarbonization of toll plazas.