Water harvesting for young trees using Peltier plates powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, it uses the electricity at the moment in which air humidity and temperature are optima to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system, rather than irrigating young plants in such a degree as to boost their growth, is to maintain them alive in the dryer periods.

Historia holocena de los pinares montanos de los sistemas Central y Cantábrico: Un objetivo con dos enfoques, biogeográfico y dendroecológico

Los estudios paleoecológicos holocenos basados en macro- y megafósiles encierran un gran valor debido a que su información tiene generalmente carácter local, su origen es conocido, pueden ser datados directamente mediante el método radiocarbónico, y pueden identificarse a un nivel taxonómicamente preciso. Sin embargo son pocas las áreas del Sur de Europa en las que sea conocida una alta densidad de yacimientos con restos leñosos de gran tamaño. En esta tesis, se presentan datos de 53 yacimientos de la sierra de Gredos y de la cordillera Cantábrica (Península Ibérica). Los restos fueron hallados en ambientes variados, como zonas higroturbosas, turberas erosionadas o lagos, y fueron identificadas mediante el estudio de la anatomía de la madera o mediante rasgos morfológicos. En la sierra de Gredos, la evidencia paleobotánica indica la existencia de un panorama relativamente estable a lo largo del Holoceno medio y principio del Holoceno final y sugiere la persistencia, a lo largo de milenios, de un piso de pinares ampliamente distribuído en cotas altas de la sierra. La información obtenida de piñas y frutos mejoran la información taxonómica disponible y revelan la existencia tanto de Pinus sylvestris como de Pinus nigra en estas sierras durante el Holoceno. La datación radiocarbónica, medición de anillos de crecimiento y sincronización preliminar de 26 secciones de troncos de subfósiles demuestran el potencial de este material de las montañas de Iberia central en la obtención de cronologías holocenas de pino. En la cordillera Cantábrica, los datos aportan información espacialmente precisa de distribuciones de ciertas especies arbóreas durante el Holoceno. En las zonas centrales de la cordillera, han sido hallados fundamentalmente restos de pino, mientras que en las zonas más occidentales los pinos estás ausentes y los restos encontrados corresponden a otras especies de caducifolios (Betula, Salix, Quercus) y arbustos (Erica, Fabaceae) Esta información paleobiogeográfica constrasta con la distribución natural actual de Pinus sylvestris y Pinus nigra en el área de estudio. En la sierra de Gredos, la naturalidad de las escasos rodales de pinos que aún persisten ha sido discutida, mientras que en la cordillera Cantábrica, la única especie del grupo que persiste es P. sylvestris y está localizada en unos pocos relictos. El clima pudo haber jugado un papel importante en una primera fase de declive de los pinares durante el Holoceno inicial, mostrado en numerosos registros polínicos de manera casi sincrónica y asociada a una expansión de frondosas. Sin embargo la información histórica disponible y la comparación entre las áreas de distribución de los pinares en el presente, modelizada y en momentos anteriores a la la generalización de la presión antrópica sugiere que durante los últimos dos milenios, la actividad humana ha sido responsable de la desaparición de estas especies como árboles naturales en áreas extensas. ABSTRACTMacro- and megafossil studies provide information of great value in palaeoecology because such evidence is spatially precise, directly radiocarbon dated and usually taxon-specific. However, few areas of southern Europe have a high density of sites with Holocene woody remains. Here, local data from 53 sites in the Gredos Mountains and the Cantabrian Range (Iberian Peninsula) is presented. Woody remains were recovered from mires, eroded peat bogs and lakes and were identified by their wood anatomy or morphological traits. In the Gredos Mountains, palaeobotanical evidence portrays a relatively stable picture of tree distribution over the mid- and beggining of the late-Holocene, and suggests the persistence of a widespread belt of pinewoods. Cones and fruits enlarge the taxonomic information available and reveal that both Pinus sylvestris and Pinus nigra were present locally during the Holocene. Radiocarbon dating, tree ring measurement and preliminary cross-dating of 26 pine sub-fossil logs demonstrate the potential of obtaining a long pine chronology from subfossil wood from the mountains of Central Iberia. In the Cantabrian Range the data provide spatially precise evidence of tree distribution in the region during the Holocene. Pines were mostly identified in the central areas, whereas at the western edge no pine evidence was detected and deciduous trees (Betula, Salix, Quercus) and shrubs (Erica, Fabaceae) were identified. This palaeoecological information contrasts with the current natural distribution ranges of P. sylvestris and P. nigra in the study area. In the Gredos Mountains, the naturality of the few pine stands currently growing has been heavily debated. In the Cantabrian Range P. sylvestris is the only pine species that is today present, and its natural presence is now limited to a few enclaves. Climate may have played a key role in the early-Holocene, as pollen archives document a pine demise that is synchronous with the spread of broadleaved taxa. However, available historical data and the comparison of the reconstructed distribution of pinewoods before extensive human forest disturbance with both present and modelled distributions suggests that during the last two millennia, anthropogenic activity may have removed these species as native trees from a large territory.

Growth data from a field trial of Quercus suber plants regenerated from selected trees and their half-sib progenies by somatic embryogenesis

The development of reliable clonal propagation technologies is a requisite for performing Multi-Varietal Forestry (MVF). Somatic embryogenesis is considered the tissue culture based method more suitable for operational breeding of forest trees. Vegetative propagation is very difficult when tissues are taken from mature donors, making clonal propagation of selected trees almost impossible. We have been able to induce somatic embryogenesis in leaves taken from mature oak trees, including cork oak (Quercus suber). This important species of the Mediterranean ecosystem produces cork regularly, conferring to this species a significant economic value. In a previous paper we reported the establishment of a field trial to compare the growth of plants of somatic origin vs zygotic origin, and somatic plants from mature trees vs somatic plants from juvenile seedlings. For that purpose somatic seedlings were regenerated from five selected cork oak trees and from young plants of their half-sib progenies by somatic embryogenesis. They were planted in the field together with acorn-derived plants of the same families. After the first growth period, seedlings of zygotic origin doubled the height of somatic seedlings, showing somatic plants of adult and juvenile origin similar growth. Here we provide data on height and diameter increases after two additional growth periods. In the second one, growth parameters of zygotic seedlings were also significantly higher than those of somatic ones, but there were not significant differences in height increase between seedlings and somatic plants of mature origin. In the third growth period, height and diameter increases of somatic seedlings cloned from the selected trees did not differ from those of zygotic seedlings, which were still higher than data from plants obtained from somatic embryos from the sexual progeny. Therefore, somatic seedlings from mature origin seem not to be influenced by a possible ageing effect, and plants from somatic embryos tend to minimize the initial advantage of plants from acorns

Biokerosene from Babassu and Camelina Oils: production and properties of their blends with fossil kerosene

Babassu and camelina oils have been transesterified with methanol by the classical homogeneous basic catalysis method with good yields. The babassu fatty acid methyl ester (FAME) has been subjected to fractional distillation at vacuum, and the low boiling point fraction has been blended with two types of fossil kerosene, a straight-run atmospheric distillation cut (hydrotreated) and a commercial Jet-A1. The camelina FAME has been blended with the fossil kerosene without previous distillation. The blends of babassu biokerosene and Jet-A1 have met some of the specifications selected for study of the ASTM D1655 standard: smoke point, density, flash point, cloud point, kinematic viscosity, oxidative stability and lower heating value. On the other hand, the blends of babassu biokerosene and atmospheric distillation cut only have met the density parameter and the oxidative stability. The blends of camelina FAME and atmospheric distillation cut have met the following specifications: density, kinematic viscosity at −20 °C, and lower heating value. With these preliminary results, it can be concluded that it would be feasible to blend babassu and camelina biokerosenes prepared in this way with commercial Jet-A1 up to 10 vol % of the former, if these blends prove to accomplish all the ASTM D1655-09 standards.

A new method for the identification of old-growth trees in National Forest Inventories: Application to Pinus halepensis Mill. stands in Spain

Old-growth trees play a very important role in the maintenance of biodiversity in forests. However, no clear definition is yet available to help identify them since tree age is usually not recorded in National Forest Inventories. To develop and test a new method to identify old-growth trees using a species-specific threshold for tree diameter in National Forest Inventories. Different nonlinear mixed models for diameter ? age were generated using data from the Spanish Forest Inventory in order to identify the most appropriate one for Aleppo pine in its South-western distribution area. The asymptote of the optimal model indicates the threshold diameter for defining an old-growth tree. Additionally, five site index curves were examined to analyze the influence of site quality on these models.

Influence of climate change on the flowering of temperate fruit trees

It is well known that winter chilling is necessary for the flowering of temperate trees. The chilling requirement is a criterion for choosing a species or variety at a given location. Also chemistry products can be used for reducing the chilling-hours needs but make our production more expensive. This study first analysed the observed values of chilling hours for some representative agricultural locations in Spain for the last three decades and their projected changes under climate change scenarios. Usually the chilling is measured and calculated as chilling-hours, and different methods have been used to calculate them (e.g. Richarson et al., 1974 among others) according to the species considered. For our objective North Carolina method (Shaltout and Unrath, 1983) was applied for apples, Utah method (Richardson et al. 1974) for peach and grapevine and the approach used by De Melo-Abreu et al. (2004) for olive trees. The influence of climate change in temperate trees was studied by calculating projections of chilling-hours with climate data from Regional Climate Models (RCMs) at high resolution (25 km) from the European Project ENSEMBLES (http://www.ensembles-eu.org/). These projections will allow for analysing the modelled variations of chill-hours between 2nd half of 20C and 1st half of 21C at the study locations.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

Use of decision trees algorithm for the territorial logistic planning.

Data mining, and in particular decision trees have been used in different fields: engineering, medicine, banking and finance, etc., to analyze a target variable through decision variables. The following article examines the use of the decision trees algorithm as a tool in territorial logistic planning. The decision tree built has estimated population density indexes for territorial units with similar logistics characteristics in a concise and practical way.

Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy

Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, uses the electricity at the moment in which air humidity and temperature are optimal to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system is to sustain young plants in drier periods, rather than exclusively irrigating young plants to boost their growth.

Automatic blood glucose classification for gestational diabetes with feature selection: decision trees vs neural networks

Automatic blood glucose classification may help specialists to provide a better interpretation of blood glucose data, downloaded directly from patients glucose meter and will contribute in the development of decision support systems for gestational diabetes. This paper presents an automatic blood glucose classifier for gestational diabetes that compares 6 different feature selection methods for two machine learning algorithms: neural networks and decision trees. Three searching algorithms, Greedy, Best First and Genetic, were combined with two different evaluators, CSF and Wrapper, for the feature selection. The study has been made with 6080 blood glucose measurements from 25 patients. Decision trees with a feature set selected with the Wrapper evaluator and the Best first search algorithm obtained the best accuracy: 95.92%.

Modelling and forecasting fossil fuels, CO2 and electricity prices and their volatilities

In the current uncertain context that affects both the world economy and the energy sector, with the rapid increase in the prices of oil and gas and the very unstable political situation that affects some of the largest raw materials’ producers, there is a need for developing efficient and powerful quantitative tools that allow to model and forecast fossil fuel prices, CO2 emission allowances prices as well as electricity prices. This will improve decision making for all the agents involved in energy issues. Although there are papers focused on modelling fossil fuel prices, CO2 prices and electricity prices, the literature is scarce on attempts to consider all of them together. This paper focuses on both building a multivariate model for the aforementioned prices and comparing its results with those of univariate ones, in terms of prediction accuracy (univariate and multivariate models are compared for a large span of days, all in the first 4 months in 2011) as well as extracting common features in the volatilities of the prices of all these relevant magnitudes. The common features in volatility are extracted by means of a conditionally heteroskedastic dynamic factor model which allows to solve the curse of dimensionality problem that commonly arises when estimating multivariate GARCH models. Additionally, the common volatility factors obtained are useful for improving the forecasting intervals and have a nice economical interpretation. Besides, the results obtained and methodology proposed can be useful as a starting point for risk management or portfolio optimization under uncertainty in the current context of energy markets.

Vegetal preservation in the “Lo Hueco” fossil site (Cuenca, Spain)

Preservación Vegetal en el yacimiento Lo Hueco (Cuenca, España)

Airplane materials compatibility with blends of fossil kerosene JET A1 with biokerosenes from babassu, palm kernel and coconut oils

The aviation companies are facing some problems that argue in favor of biofuels: Rising cost of traditional fuel: from 0.71 USD/gallon in May 2003 to 3.09 USD/gallon in January 2012. Environmental concerns: direct emissions from aviation account for about 3 % of the EU’s total greenhouse gas emissions. The International Civil Aviation Organization (ICAO) forecasts that by 2050 they could grow by a further 300-700 %. On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights (European Union Emissions Trading System, EUETS)

Blends of babassu, palm kernal and coconut mame with fossil kerosene: low carbon number methyl esters as a possible source for renewable jet fuel

Three different oils: babassu, coconut and palm kernel have been transesterified with methanol. The fatty acid methyl esters (FAME) have been subjected to vacuum fractional distillation, and the low boiling point fractions have been blended with fossil kerosene at three different proportions: 5, 10 and 20% vol.

Blends of babassu, palm kernel and coconut fame with fossil kerosene. Technical aspects of low carbon number methyl esters as a possible source for renewable jet fuel

State of the Art. Process and Distillation. Fuel Characterization. Fuel Compatibility Tests