New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells

Laser processing has been the tool of choice last years to develop improved concepts in contact formation for high efficiency crystalline silicon (c-Si) solar cells. New concepts based on standard laser fired contacts (LFC) or advanced laser doping (LD) techniques are optimal solutions for both the front and back contacts of a number of structures with growing interest in the c-Si PV industry. Nowadays, substantial efforts are underway to optimize these processes in order to be applied industrially in high efficiency concepts. However a critical issue in these devices is that, most of them, demand a very low thermal input during the fabrication sequence and a minimal damage of the structure during the laser irradiation process. Keeping these two objectives in mind, in this work we discuss the possibility of using laser-based processes to contact the rear side of silicon heterojunction (SHJ) solar cells in an approach fully compatible with the low temperature processing associated to these devices. First we discuss the possibility of using standard LFC techniques in the fabrication of SHJ cells on p-type substrates, studying in detail the effect of the laser wavelength on the contact quality. Secondly, we present an alternative strategy bearing in mind that a real challenge in the rear contact formation is to reduce the damage induced by the laser irradiation. This new approach is based on local laser doping techniques previously developed by our groups, to contact the rear side of p-type c-Si solar cells by means of laser processing before rear metallization of dielectric stacks containing Al2O3. In this work we demonstrate the possibility of using this new approach in SHJ cells with a distinct advantage over other standard LFC techniques.

Fabrication process of Mo/Au TES at RT

We report on the fabrication details of TES based on Mo/Au bilayers. The Mo layer is deposited by radio frequency (RF) sputtering and capped with a sputter deposited thin Au protection layer. Afterwards, a second Au layer of suitable (lower) resistivity is deposited ex‐situ by e‐beam evaporation, until completion of the total desired Au thickness. The deposition was performed at room temperature (RT) on LPCVD Si3 N4 membranes. Such a deposition procedure is very reproducible and allow controlling the critical temperature (Tc) and normal electrical resistance (RN ) of the Mo/Au bilayer. The process is optimized to achieve low stress bilayers, thus avoiding the undesirable curvature of the membranes. Bilayers are patterned using photolithographic techniques and wet etching procedures. Mo superconducting paths are used to contact the Mo/Au bilayers, thus ensuring good electrical conductivity and thermal isolation. The entire fabrication process let to stable and reproducible sensors with required and tunable functional properties

Interference of parallel cylindrical Langmuir probes

Current to a cylindrical probe of arbitrary cross section is discussed. Previous results for circular cylinders at the high bias and moderate radius R of interest for electrodynamic bare tethers, for which space charge may be ignored over a large neighborhood of the probe, depend in separate ways on both R and perimeter p. These results are extended to a general convex cross section by introducing certain equivalent radius Req. For any concave cross section, results use a proper equivalent perimeter peq , in addition to Req. Finally, for the joint cross section of separate parallel probes, certain effective perimeter peff replaces peq. Rules to determine Req. peq. and peff are used to discuss collection interference among two or more parallel cylinders when brought from far away to contact

A framework for building distributed social network websites

Las redes son la esencia de comunidades y sociedades humanas; constituyen el entramado en el que nos relacionamos y determinan cómo lo hacemos, cómo se disemina la información o incluso cómo las cosas se llevan a cabo. Pero el protagonismo de las redes va más allá del que adquiere en las redes sociales. Se encuentran en el seno de múltiples estructuras que conocemos, desde las interaciones entre las proteínas dentro de una célula hasta la interconexión de los routers de internet. Las redes sociales están presentes en internet desde sus principios, en el correo electrónico por tomar un ejemplo. Dentro de cada cliente de correo se manejan listas contactos que agregadas constituyen una red social. Sin embargo, ha sido con la aparición de los sitios web de redes sociales cuando este tipo de aplicaciones web han llegado a la conciencia general. Las redes sociales se han situado entre los sitios más populares y con más tráfico de la web. Páginas como Facebook o Twitter manejan cifras asombrosas en cuanto a número de usuarios activos, de tráfico o de tiempo invertido en el sitio. Pero las funcionalidades de red social no están restringidas a las redes sociales orientadas a contactos, aquellas enfocadas a construir tu lista de contactos e interactuar con ellos. Existen otros ejemplos de sitios que aprovechan las redes sociales para aumentar la actividad de los usuarios y su involucración alrededor de algún tipo de contenido. Estos ejemplos van desde una de las redes sociales más antiguas, Flickr, orientada al intercambio de fotografías, hasta Github, la red social de código libre más popular hoy en día. No es una casualidad que la popularidad de estos sitios web venga de la mano de sus funcionalidades de red social. El escenario es más rico aún, ya que los sitios de redes sociales interaccionan entre ellos, compartiendo y exportando listas de contactos, servicios de autenticación y proporcionando un valioso canal para publicitar la actividad de los usuarios en otros sitios web. Esta funcionalidad es reciente y aún les queda un paso hasta que las redes sociales superen su condición de bunkers y lleguen a un estado de verdadera interoperabilidad entre ellas, tal como funcionan hoy en día el correo electrónico o la mensajería instantánea. Este trabajo muestra una tecnología que permite construir sitios web con características de red social distribuída. En primer lugar, se presenta una tecnología para la construcción de un componente intermedio que permite proporcionar cualquier característica de gestión de contenidos al popular marco de desarrollo web modelo-vista-controlador (MVC) Ruby on Rails. Esta técnica constituye una herramienta para desarrolladores que les permita abstraerse de las complejidades de la gestión de contenidos y enfocarse en las particularidades de los propios contenidos. Esta técnica se usará también para proporcionar las características de red social. Se describe una nueva métrica de reusabilidad de código para demostrar la validez del componente intermedio en marcos MVC. En segundo lugar, se analizan las características de los sitios web de redes sociales más populares, con el objetivo de encontrar los patrones comunes que aparecen en ellos. Este análisis servirá como base para definir los requisitos que debe cumplir un marco para construir redes sociales. A continuación se propone una arquitectura de referencia que proporcione este tipo de características. Dicha arquitectura ha sido implementada en un componente, Social Stream, y probada en varias redes sociales, tanto orientadas a contactos como a contenido, en el contexto de una asociación vecinal tanto como en proyectos de investigación financiados por la UE. Ha sido la base de varios proyectos fin de carrera. Además, ha sido publicado como código libre, obteniendo una comunidad creciente y está siendo usado más allá del ámbito de este trabajo. Dicha arquitectura ha permitido la definición de un nuevo modelo de control de acceso social que supera varias limitaciones presentes en los modelos de control de acceso para redes sociales. Más aún, se han analizado casos de estudio de sitios de red social distribuídos, reuniendo un conjunto de caraterísticas que debe cumplir un marco para construir redes sociales distribuídas. Por último, se ha extendido la arquitectura del marco para dar cabida a las características de redes sociales distribuídas. Su implementación ha sido validada en proyectos de investigación financiados por la UE. Abstract Networks are the substance of human communities and societies; they constitute the structural framework on which we relate to each other and determine the way we do it, the way information is diseminated or even the way people get things done. But network prominence goes beyond the importance it acquires in social networks. Networks are found within numerous known structures, from protein interactions inside a cell to router connections on the internet. Social networks are present on the internet since its beginnings, in emails for example. Inside every email client, there are contact lists that added together constitute a social network. However, it has been with the emergence of social network sites (SNS) when these kinds of web applications have reached general awareness. SNS are now among the most popular sites in the web and with the higher traffic. Sites such as Facebook and Twitter hold astonishing figures of active users, traffic and time invested into the sites. Nevertheless, SNS functionalities are not restricted to contact-oriented social networks, those that are focused on building your own list of contacts and interacting with them. There are other examples of sites that leverage social networking to foster user activity and engagement around other types of content. Examples go from early SNS such as Flickr, the photography related networking site, to Github, the most popular social network repository nowadays. It is not an accident that the popularity of these websites comes hand-in-hand with their social network capabilities The scenario is even richer, due to the fact that SNS interact with each other, sharing and exporting contact lists and authentication as well as providing a valuable channel to publize user activity in other sites. These interactions are very recent and they are still finding their way to the point where SNS overcome their condition of data silos to a stage of full interoperability between sites, in the same way email and instant messaging networks work today. This work introduces a technology that allows to rapidly build any kind of distributed social network website. It first introduces a new technique to create middleware that can provide any kind of content management feature to a popular model-view-controller (MVC) web development framework, Ruby on Rails. It provides developers with tools that allow them to abstract from the complexities related with content management and focus on the development of specific content. This same technique is also used to provide the framework with social network features. Additionally, it describes a new metric of code reuse to assert the validity of the kind of middleware that is emerging in MVC frameworks. Secondly, the characteristics of top popular SNS are analysed in order to find the common patterns shown in them. This analysis is the ground for defining the requirements of a framework for building social network websites. Next, a reference architecture for supporting the features found in the analysis is proposed. This architecture has been implemented in a software component, called Social Stream, and tested in several social networks, both contact- and content-oriented, in local neighbourhood associations and EU-founded research projects. It has also been the ground for several Master’s theses. It has been released as a free and open source software that has obtained a growing community and that is now being used beyond the scope of this work. The social architecture has enabled the definition of a new social-based access control model that overcomes some of the limitations currenly present in access control models for social networks. Furthermore, paradigms and case studies in distributed SNS have been analysed, gathering a set of features for distributed social networking. Finally the architecture of the framework has been extended to support distributed SNS capabilities. Its implementation has also been validated in EU-founded research projects.

Collection effects on close pararell bare tethers

We review previously published results, and present new results, on the way current to a cylindrical probe drops below the orbital-motion-limited (OML) value for probe cross-sections too large or concave. Results on size and shape effects arise from unrelated behavior in the near and far potential field, and apply to a general cross-section, which can be characterised by radius Req and perimeter peij of equivalent circles. These results are used to discuss collection interference among two or more parallel bare tethers when brought from far away to contact.

Random positions of dendritic spines in human cerebral cortex

Dendritic spines establish most excitatory synapses in the brain and are located in Purkinje cell’s dendrites along helical paths, perhaps maximizing the probability to contact different axons. To test whether spine helixes also occur in neocortex, we reconstructed >500 dendritic segments from adult human cortex obtained from autopsies. With Fourier analysis and spatial statistics, we analyzed spine position along apical and basal dendrites of layer 3 pyramidal neurons from frontal, temporal, and cingulate cortex. Although we occasionally detected helical positioning, for the great majority of dendrites we could not reject the null hypothesis of spatial randomness in spine locations, either in apical or basal dendrites, in neurons of different cortical areas or among spines of different volumes and lengths. We conclude that in adult human neocortex spine positions are mostly random. We discuss the relevance of these results for spine formation and plasticity and their functional impact for cortical circuits.

Random positioning of dendritic spines in the human cerebral cortex

Dendritic spines establish most excitatory synapses in the brain and are located in Purkinje cell?s dendrites along helical paths, perhaps maximizing the probability to contact different axons. To test whether spine helixes also occur in neocortex, we reconstructed ?500 dendritic segments from adult human cortex obtained from autopsies. With Fourier analysis and spatial statistics, we analyzed spine position along apical and basal dendrites of layer 3 pyramidal neurons from frontal, temporal, and cingulate cortex. Although we occasionally detected helical positioning, for the great majority of dendrites we could not reject the null hypothesis of spatial randomness in spine locations, either in apical or basal dendrites, in neurons of different cortical areas or among spines of different volumes and lengths. We conclude that in adult human neocortex spine positions are mostly random. We discuss the relevance of these results for spine formation and plasticity and their functional impact for cortical circuits.

Dynamic analysis using finite elements to calculate the critical wear section of the contact wire in suburban railway overhead conductor rails

The purpose of this study is to determine the critical wear levels of the contact wire of the catenary on metropolitan lines. The study has focussed on the zones of contact wire where localised wear is produced, normally associated with the appearance of electric arcs. To this end, a finite element model has been developed to study the dynamics of pantograph-catenary interaction. The model includes a zone of localised wear and a singularity in the contact wire in order to simulate the worst case scenario from the point of view of stresses. In order to consider the different stages in the wire wear process, different depths and widths of the localised wear zone were defined. The results of the dynamic simulations performed for each stage of wear let the area of the minimum resistant section of the contact wire be determined for which stresses are greater than the allowable stress. The maximum tensile stress reached in the contact wire shows a clear sensitivity to the size of the local wear zone, defined by its width and depth. In this way, if the wear measurements taken with an overhead line recording vehicle are analysed, it will be possible to calculate the potential breakage risk of the wire. A strong dependence of the tensile forces of the contact wire has also been observed. These results will allow priorities to be set for replacing the most critical sections of wire, thereby making maintenance much more efficient. The results obtained show that the wire replacement criteria currently borne in mind have turned out to be appropriate, although in some wear scenarios these criteria could be adjusted even more, and so prolong the life cycle of the contact wire.