Flooding through the lens of mobile phone activity

Natural disasters affect hundreds of millions of people worldwide every year. Emergency response efforts depend upon the availability of timely information, such as information concerning the movements of affected populations. The analysis of aggregated and anonymized Call Detail Records (CDR) captured from the mobile phone infrastructure provides new possibilities to characterize human behavior during critical events. In this work, we investigate the viability of using CDR data combined with other sources of information to characterize the floods that occurred in Tabasco, Mexico in 2009. An impact map has been reconstructed using Landsat-7 images to identify the floods. Within this frame, the underlying communication activity signals in the CDR data have been analyzed and compared against rainfall levels extracted from data of the NASA-TRMM project. The variations in the number of active phones connected to each cell tower reveal abnormal activity patterns in the most affected locations during and after the floods that could be used as signatures of the floods - both in terms of infrastructure impact assessment and population information awareness. The epresentativeness of the analysis has been assessed using census data and civil protection records. While a more extensive validation is required, these early results suggest high potential in using cell tower activity information to improve early warning and emergency management mechanisms.

Flooding through the lens of mobile phone activity

Natural disasters affect hundreds of millions of people worldwide every year. Emergency response efforts depend upon the availability of timely information, such as information concerning the movements of affected populations. The analysis of aggregated and anonymized Call Detail Records (CDR) captured from the mobile phone infrastructure provides new possibilities to characterize human behavior during critical events. In this work, we investigate the viability of using CDR data combined with other sources of information to characterize the floods that occurred in Tabasco, Mexico in 2009. An impact map has been reconstructed using Landsat-7 images to identify the floods. Within this frame, the underlying communication activity signals in the CDR data have been analyzed and compared against rainfall levels extracted from data of the NASA-TRMM project. The variations in the number of active phones connected to each cell tower reveal abnormal activity patterns in the most affected locations during and after the floods that could be used as signatures of the floods - both in terms of infrastructure impact assessment and population information awareness. The representativeness of the analysis has been assessed using census data and civil protection records. While a more extensive validation is required, these early results suggest high potential in using cell tower activity information to improve early warning and emergency management mechanisms.

Solid catadioptric telephoto lens design with SMS method

Two new optical structures are designed using the Simultaneous Multiple Surfaces (SMS) method, comprised of 2 reflecting surfaces and 2 refracting surfaces, 800mm focal length, f/8 (aperture diameter 100 mm) and 1.180 diagonal field of view in the SWIR band. The lens surfaces are rotational symmetric and calculated to have good control of non-paraxial rays. We have achieved designs with excellent performance, and with total system length of less than 60 mm.

Ultra-compact SWIR telephoto lens design with SMS method

In this work, we propose two new optical structures, using the Simultaneous Multiple Surfaces (SMS) method, comprised of 2 reflecting surfaces and 2 refracting surfaces, 800mm focal length, f/8 (aperture diameter 100 mm) and 1.18 0 diagonal field of view in the SWIR band. The lens surfaces are rotational symmetric and calculated to have good control of non-paraxial rays. We have achieved designs with excellent performance, and with total system length of less than 60 mm.

Analytic design method for optimal imaging: coupling three ray sets using two free-form lens profiles

In this work, a new two-dimensional optics design method is proposed that enables the coupling of three ray sets with two lens surfaces. The method is especially important for optical systems designed for wide field of view and with clearly separated optical surfaces. Fermat’s principle is used to deduce a set of functional differential equations fully describing the entire optical system. The presented general analytic solution makes it possible to calculate the lens profiles. Ray tracing results for calculated 15th order Taylor polynomials describing the lens profiles demonstrate excellent imaging performance and the versatility of this new analytic design method.

Analytic free-form lens design in 3D: coupling three ray sets using two lens surfaces

The two-dimensional analytic optics design method presented in a previous paper [Opt. Express 20, 5576–5585 (2012)] is extended in this work to the three-dimensional case, enabling the coupling of three ray sets with two free-form lens surfaces. Fermat’s principle is used to deduce additional sets of functional differential equations which make it possible to calculate the lens surfaces. Ray tracing simulations demonstrate the excellent imaging performance of the resulting free-form lenses described by more than 100 coefficients.

On the design of spherical gradient index lenses

Classical spherical gradient index (GRIN) lenses (such as Maxwell Fish Eye lens, Eaton lens, Luneburg lens, etc.) design procedure using the Abel integral equation is reviewed and reorganized. Each lens is fully defined by a function called the angle of flight which describes the ray deflection through the lens. The radial refractive index distribution is obtained by applying a linear integral transformation to the angle of flight. The interest of this formulation is in the linearity of the integral transformation which allows us to derive new solutions from linear combinations of known lenses. Beside the review of the classical GRIN designs, we present a numerical method for GRIN lenses defined by the Abel integral equation with fixed limits, which is an ill-posed problem.

Optical systems design using the SMS method and optimizations

Resumen El diseño de sistemas ópticos, entendido como un arte por algunos, como una ciencia por otros, se ha realizado durante siglos. Desde los egipcios hasta nuestros días los sistemas de formación de imagen han ido evolucionando así como las técnicas de diseño asociadas. Sin embargo ha sido en los últimos 50 años cuando las técnicas de diseño han experimentado su mayor desarrollo y evolución, debido, en parte, a la aparición de nuevas técnicas de fabricación y al desarrollo de ordenadores cada vez más potentes que han permitido el cálculo y análisis del trazado de rayos a través de los sistemas ópticos de forma rápida y eficiente. Esto ha propiciado que el diseño de sistemas ópticos evolucione desde los diseños desarrollados únicamente a partir de la óptica paraxial hasta lo modernos diseños realizados mediante la utilización de diferentes técnicas de optimización multiparamétrica. El principal problema con el que se encuentra el diseñador es que las diferentes técnicas de optimización necesitan partir de un diseño inicial el cual puede fijar las posibles soluciones. Dicho de otra forma, si el punto de inicio está lejos del mínimo global, o diseño óptimo para las condiciones establecidas, el diseño final puede ser un mínimo local cerca del punto de inicio y lejos del mínimo global. Este tipo de problemática ha llevado al desarrollo de sistemas globales de optimización que cada vez sean menos sensibles al punto de inicio de la optimización. Aunque si bien es cierto que es posible obtener buenos diseños a partir de este tipo de técnicas, se requiere de muchos intentos hasta llegar a la solución deseada, habiendo un entorno de incertidumbre durante todo el proceso, puesto que no está asegurado el que se llegue a la solución óptima. El método de las Superficies Múltiples Simultaneas (SMS), que nació como una herramienta de cálculo de concentradores anidólicos, se ha demostrado como una herramienta también capaz utilizarse para el diseño de sistemas ópticos formadores de imagen, aunque hasta la fecha se ha utilizado para el diseño puntual de sistemas de formación de imagen. Esta tesis tiene por objeto presentar el SMS como un método que puede ser utilizado de forma general para el diseño de cualquier sistema óptico de focal fija o v afocal con un aumento definido así como una herramienta que puede industrializarse para ayudar al diseñador a afrontar de forma sencilla el diseño de sistemas ópticos complejos. Esta tesis está estructurada en cinco capítulos: El capítulo 1, es un capítulo de fundamentos donde se presentan los conceptos fundamentales necesarios para que el lector, aunque no posea una gran base en óptica formadora de imagen, pueda entender los planteamientos y resultados que se presentan en el resto de capítulos El capitulo 2 aborda el problema de la optimización de sistemas ópticos, donde se presenta el método SMS como una herramienta idónea para obtener un punto de partida para el proceso de optimización. Mediante un ejemplo aplicado se demuestra la importancia del punto de partida utilizado en la solución final encontrada. Además en este capítulo se presentan diferentes técnicas que permiten la interpolación y optimización de las superficies obtenidas a partir de la aplicación del SMS. Aunque en esta tesis se trabajará únicamente utilizando el SMS2D, se presenta además un método para la interpolación y optimización de las nubes de puntos obtenidas a partir del SMS3D basado en funciones de base radial (RBF). En el capítulo 3 se presenta el diseño, fabricación y medidas de un objetivo catadióptrico panorámico diseñado para trabajar en la banda del infrarrojo lejano (8-12 μm) para aplicaciones de vigilancia perimetral. El objetivo presentado se diseña utilizando el método SMS para tres frentes de onda de entrada utilizando cuatro superficies. La potencia del método de diseño utilizado se hace evidente en la sencillez con la que este complejo sistema se diseña. Las imágenes presentadas demuestran cómo el prototipo desarrollado cumple a la perfección su propósito. El capítulo 4 aborda el problema del diseño de sistemas ópticos ultra compactos, se introduce el concepto de sistemas multicanal, como aquellos sistemas ópticos compuestos por una serie de canales que trabajan en paralelo. Este tipo de sistemas resultan particularmente idóneos para él diseño de sistemas afocales. Se presentan estrategias de diseño para sistemas multicanal tanto monocromáticos como policromáticos. Utilizando la novedosa técnica de diseño que en este capítulo se presenta el diseño de un telescopio de seis aumentos y medio. En el capítulo 5 se presenta una generalización del método SMS para rayos meridianos. En este capítulo se presenta el algoritmo que debe utilizarse para el diseño de cualquier sistema óptico de focal fija. La denominada optimización fase 1 se vi introduce en el algoritmo presentado de forma que mediante el cambio de las condiciones iníciales del diseño SMS que, aunque el diseño se realice para rayos meridianos, los rayos skew tengan un comportamiento similar. Para probar la potencia del algoritmo desarrollado se presenta un conjunto de diseños con diferente número de superficies. La estabilidad y potencia del algoritmo se hace evidente al conseguirse por primera vez el diseño de un sistema de seis superficies diseñado por SMS. vii Abstract The design of optical systems, considered an art by some and a science by others, has been developed for centuries. Imaging optical systems have been evolving since Ancient Egyptian times, as have design techniques. Nevertheless, the most important developments in design techniques have taken place over the past 50 years, in part due to the advances in manufacturing techniques and the development of increasingly powerful computers, which have enabled the fast and efficient calculation and analysis of ray tracing through optical systems. This has led to the design of optical systems evolving from designs developed solely from paraxial optics to modern designs created by using different multiparametric optimization techniques. The main problem the designer faces is that the different optimization techniques require an initial design which can set possible solutions as a starting point. In other words, if the starting point is far from the global minimum or optimal design for the set conditions, the final design may be a local minimum close to the starting point and far from the global minimum. This type of problem has led to the development of global optimization systems which are increasingly less sensitive to the starting point of the optimization process. Even though it is possible to obtain good designs from these types of techniques, many attempts are necessary to reach the desired solution. This is because of the uncertain environment due to the fact that there is no guarantee that the optimal solution will be obtained. The Simultaneous Multiple Surfaces (SMS) method, designed as a tool to calculate anidolic concentrators, has also proved useful for the design of image-forming optical systems, although until now it has occasionally been used for the design of imaging systems. This thesis aims to present the SMS method as a technique that can be used in general for the design of any optical system, whether with a fixed focal or an afocal with a defined magnification, and also as a tool that can be commercialized to help designers in the design of complex optical systems. The thesis is divided into five chapters. Chapter 1 establishes the basics by presenting the fundamental concepts which the reader needs to acquire, even if he/she doesn‟t have extensive knowledge in the field viii of image-forming optics, in order to understand the steps taken and the results obtained in the following chapters. Chapter 2 addresses the problem of optimizing optical systems. Here the SMS method is presented as an ideal tool to obtain a starting point for the optimization process. The importance of the starting point for the final solution is demonstrated through an example. Additionally, this chapter introduces various techniques for the interpolation and optimization of the surfaces obtained through the application of the SMS method. Even though in this thesis only the SMS2D method is used, we present a method for the interpolation and optimization of clouds of points obtained though the SMS3D method, based on radial basis functions (RBF). Chapter 3 presents the design, manufacturing and measurement processes of a catadioptric panoramic lens designed to work in the Long Wavelength Infrared (LWIR) (8-12 microns) for perimeter surveillance applications. The lens presented is designed by using the SMS method for three input wavefronts using four surfaces. The powerfulness of the design method used is revealed through the ease with which this complex system is designed. The images presented show how the prototype perfectly fulfills its purpose. Chapter 4 addresses the problem of designing ultra-compact optical systems. The concept of multi-channel systems, such as optical systems composed of a series of channels that work in parallel, is introduced. Such systems are especially suitable for the design of afocal systems. We present design strategies for multichannel systems, both monochromatic and polychromatic. A telescope designed with a magnification of six-and-a-half through the innovative technique exposed in this chapter is presented. Chapter 5 presents a generalization of the SMS method for meridian rays. The algorithm to be used for the design of any fixed focal optics is revealed. The optimization known as phase 1 optimization is inserted into the algorithm so that, by changing the initial conditions of the SMS design, the skew rays have a similar behavior, despite the design being carried out for meridian rays. To test the power of the developed algorithm, a set of designs with a different number of surfaces is presented. The stability and strength of the algorithm become apparent when the first design of a system with six surfaces if obtained through the SMS method.

A novel scanning lens instrument for evaluating Fresnel lens performance: equipment development and initial results

A system dedicated to the optical transmittance characterization of Fresnel lenses has been developed at NREL, in collaboration with the UPM. The system quantifies the optical efficiency of the lens by generating a performance map. The shape of the focused spot may also be analyzed to understand change in the lens performance. The primary instrument components (lasers and CCD detector) have been characterized to confirm their capability for performing optical transmittance measurements. Measurements performed on SoG and PMMA lenses subject to a variety of indoor conditions (e.g., UV and damp heat) identified differences in the optical efficiency of the evaluated lenses, demonstrating the ability of the Scanning Lens Instrument (SLI) to distinguish between the aged lenses.

Producción y gestión habitacional de los pobladores : articulación con la política de vivienda y barrio : trayectoria y problemática actual

Esta tesis analiza las acciones de los pobladores en la creación, consolidación y transformación de su hábitat y en su relación con la política pública de vivienda y barrio en Chile. A partir de la observación directa en terreno y de la revisión de material proveniente de diversas fuentes afirmamos que, aunque los pobladores han hecho un trabajo de producción del hábitat de gran magnitud y generalizado, las políticas públicas no han reconocido suficientemente su papel en la construcción de la ciudad, no han incorporado a cabalidad las potencialidades e innovaciones surgidas de sus prácticas y estrategias, y nunca les han abierto un espacio claro en la toma de decisiones y en la puesta en obra de los programas habitacionales. En el contexto latinoamericano, la política habitacional chilena de los últimos 20 años se ha considerado un éxito y un ejemplo a seguir, puesto que ha demostrado ser eficaz en la disminución del déficit habitacional. Sin embargo, ha tenido efectos urbanos y sociales nefastos, como la construcción de extensos bolsones periféricos de pobreza que se degradan aceleradamente, y la desintegración social que genera la expulsión de los sin casa a la periferia, donde pierden sus redes familiares y sociales. Desde una trinchera opuesta, los allegados, los sin casa que viven al alero de otras familias y representan la mayoría de la demanda por vivienda, exigen quedarse en barrios ya consolidados y evitan las periferias, en parte por mantener una red familiar y social que se sustenta en la proximidad física, en parte por los equipamientos y servicios con que cuentan estos barrios y la cercanía a las fuentes de empleo. Al mismo tiempo, los responsables de diseñar la política habitacional no han buscado establecer una forma de colaboración con los pobladores —principales receptores de la política— con el fin ajustar los programas públicos a las necesidades de las familias de bajos ingresos y a las realidades socioculturales de sus barrios. Por el contrario, han privilegiado una alianza con el sector privado, que conoce muy limitadamente las demandas de las familias. Así, en lugar de construir ciudades más justas, la política habitacional ha alimentado un mercado inmobiliario sustentado en la especulación del suelo y fomentado la industria de la construcción. La pregunta que guía esta investigación es cómo incorporar el conocimiento acumulado y los procedimientos probados por los pobladores al diseño y la implementación de programas habitacionales y urbanos que promuevan procesos de regeneración de las poblaciones y mejoren la distribución de la vivienda social en la ciudad. Sostenemos que los pobladores, a lo largo de una trayectoria de más de medio siglo, han adquirido y consolidado todas las competencias para construir vivienda, mejorar sus barrios e incorporarse a la discusión sobre ordenamiento territorial. Así, hoy están capacitados para asumir un papel protagónico en la definición de políticas públicas que apunte a la construcción de ciudades más sostenibles y equitativas. La producción social del hábitat vinculada al derecho a la ciudad y a la participación de los pobladores «desde abajo» está bastante documentada en la literatura latinoamericana. En Chile se han escrito numerosos trabajos y evaluaciones sobre la política habitacional, pero los estudios sobre el movimiento de pobladores, enfocados desde las ciencias sociales o multidisciplinares, tienen un auge primero, durante los años 60 y principios de los 70 y luego, en la segunda mitad de los 80, pero posteriormente dejan de publicarse, a excepción de algunas investigaciones de historia urbana o social. En cuanto a los estudios que abordan las acciones de los pobladores desde una mirada puesta en los resultados de la producción y la gestión habitacional y urbana, estos han sido especialmente escasos y ninguno abarca un período largo. La tesis aborda entonces las acciones específicas que emprenden los pobladores a distintas escalas territoriales —el conjunto, el barrio, la población, la ciudad y el país—, su relación con la política habitacional y su articulación con los demás actores que intervienen en la producción material del hábitat. Lo realizado por los pobladores se estudia a la luz del largo plazo, desde la promulgación de la primera ley de vivienda en 1906 hasta nuestros días, con el énfasis puesto entre los años 1990 y 2010, período de producción masiva y sostenida de vivienda social, financiada por el Estado y construida por el sector privado en la periferia urbana, y más detalladamente entre 2006 y 2010, cuando los pobladores irrumpen con la «gestión vecinal» y la «autogestión» como medios para implementar los programas habitacionales del gobierno. Para ello se recorre toda la trayectoria y se complementa con procesos particulares, a la manera de un lente de acercamiento con el cual se focalizan y amplifican trece casos de estudios, para ilustrar modos de producción y gestión concretos y mostrar cómo estos se inscriben en modos de hacer genéricos de los pobladores. Finalmente, con el lente centrado en el último ciclo de este proceso escribimos el capítulo inédito de los últimos veinte años de esta historia. Primero se realiza la reconstrucción de tres casos de estudio «en profundidad», que incluyen la génesis, la consolidación y las transformaciones del conjunto o barrio. Estos casos de estudio «en profundidad» se ponen en perspectiva reconstruyendo la trayectoria histórica de la producción y gestión realizada por los pobladores. Esta reconstrucción de largo período se profundiza con tres casos de estudio «específicos», de dimensión histórica, que tratan el conflicto del acceso a suelo. Finalmente se analizan las interrogantes que plantean estos procesos hoy en día para la producción y gestión de vivienda y barrio a futuro, a partir de entrevistas a actores claves y de la reconstrucción de siete casos de estudio «específicos» de acceso a suelo ilustrativos del período actual. La tesis sustenta que los pobladores, con las acciones de gestión y autogestión que realizan desde 2006, e interviniendo en la discusión sobre los instrumentos de planificación territorial a partir del mismo año, se sitúan actualmente en una nueva plataforma de acción y negociación desde la cual pueden incorporarse, con todas las competencias necesarias, a la definición de las políticas públicas y así dotarlas de pertinencia y coherencia para contribuir a superar la pobreza con respuestas más acorde a sus realidades. ABSTRACT This thesis analyzes the actions of pobladores in the creation, consolidation and transformation of their habitat and their relationship with Chilean public housing and neighbourhood policy. Through direct observation in the field and the review of material from various sources we can affirm that although the pobladores have undertaken widespread work in the production of their environment, public policies have not sufficiently recognized their role in the construction of the city. Public policy has failed to fully incorporate the potential and innovation arising from practices and strategies employed by social housing recipients and has never opened a clear space for them in decision-making or the commissioning work of the housing programs. Within the Latin America context, the Chilean housing policy of the past 20 years has been considered a success and an example to follow given that it has proven effective in reducing the housing deficit. However it has had disastrous urban and social effects, such as construction of large peripheral pockets of poverty that degrade rapidly, and generates social disintegration through the expulsion of the homeless to the periphery, where they lose their family and social networks. On another front those homeless who live under the roof of relatives and who represent the majority of demand for social housing, request to stay in consolidated neighbourhoods avoiding the periphery, partly to maintain family and social networks based on physical proximity and partly because of the facilities and services available in these neighbourhoods and their adjacency to sources of employment. At the same time, those responsible for designing housing policy have not sought to establish a form of collaboration with the pobladores in order to adjust the public programs to the needs of low-income families and the socio-cultural realities of their neighbourhoods. On the contrary an alliance with the private sector has been favored, a sector which has very limited knowledge of the demands of the recipients. Therefore instead of building more equal cities, housing policy has fueled a housing market which supports land speculation and promotes the construction industry. The question leading this research is how to incorporate the accumulated knowledge and proven procedures of the pobladores in the design and implementation of programs that promote housing and urban regeneration processes and which could improve the distribution of social housing in the city. We maintain that social housing recipients over the course of half a century have acquired and consolidated all the skills to build housing, improve neighborhoods and join the discussion on city planning. These residents are now capable of assuming a leading role in defining public policies that aim to build more sustainable and equitable cities. The social production of the environment linked to the right to the city and resident participation from the «bottom-up» is well documented in Latin American literature. In Chile there are extensive written works and assessments on housing policy with multidisciplinary or social science studies on the movement of the pobladores peaking during the 60’s and early 70’s and then again in the second half of the 80’s but afterwards this stops, with the exception of some research on social or urban history. As for studies that address the actions of the pobladores looking at the results of production and housing and urban management these have been particularly scarce and none of which cover a long period of time. The thesis then addresses the specific actions undertaken by the pobladores at different territorial levels; the housing development, the neighbourhood, the community, the city and State, and their relation to housing policy and its coordination with other actors involved in the production process of the built environment. The accomplishments of the pobladores is studied over the long term, since the enactment of the first housing law in 1906 to the present, with an emphasis between 1990 and 2010, a period of mass production and sustained social housing which was State-funded and built by the private sector in the urban periphery, and in particular between 2006 and 2010, when the pobladores break with the «neighborhood management» and «self-management» as a means to implement the housing programs of the government. To this end the entire process is outlined and is complemented by specific processes which are placed under a lens in order to focus and amplify thirteen case studies illustrating actual ways of production and management and to show how these ways of doing things are generic to the pobladores. Finally, with the lens focused on the last cycle of this process we write the new chapter of the last twenty years of this history. First there is a reconstruction of three case studies «in depth», including their origins, consolidation and the transformation of the sector or neighborhood. These «in depth» case studies are put into perspective reconstructing the historical trajectory of the production and management by the pobladores. This reconstruction over a long period is given great depth by three «specific» case studies, of historical importance, dealing with the conflict of access to land. Finally we analyze the questions raised by these processes for the production and management of housing and neighborhood in the future, based on interviews with key players and the reconstruction of seven case studies specifically regarding access to land and which are illustrative of current practice. The thesis maintains that since 2006 the pobladores through actions of management and selfmanagement and their intervention in the debate on territorial planning has placed them on a new platform for action and negotiation from which they can incorporate themselves, with all the necessary capacities, in the definition of public policy and therefore provide it with a pertinence and coherence to help towards overcoming poverty with answers more according to their realities.

Lenticular arrays based on liquid crystals

Lenticular array products have experienced a growing interest in the last decade due to the very wide range of applications they can cover. Indeed, this kind of lenses can create different effects on a viewing image such as 3D, flips, zoom, etc. In this sense, lenticular based on liquid crystals (LC) technology is being developed with the aim of tuning the lens profiles simply by controlling the birefringence electrically. In this work, a LC lenticular lens array has been proposed to mimic a GRIN lenticular lens array but adding the capability of tuning their lens profiles. Comb control electrodes have been designed as pattern masks for the ITO on the upper substrate. Suitable high resistivity layers have been chosen to be deposited on the control electrode generating an electric field gradient between teeth of the same electrode. Test measurements have allowed us to demonstrate that values of phase retardations and focal lengths, for an optimal driving waveform, are fairly in agreement. In addition, results of focusing power of tuneable lenses were compared to those of conventional lenses. The behaviour of both kinds of lenses has revealed to be mutually similar for focusing collimated light and for refracting images.

Can Jupiters be found by monitoring Galactic bulge microlensing events from northern sites?

In 1998 the EXPORT team monitored microlensing event light curves using a charge-coupled device (CCD) camera on the IAC 0.8-m telescope on Tenerife to evaluate the prospect of using northern telescopes to find microlens anomalies that reveal planets orbiting the lens stars. The high airmass and more limited time available for observations of Galactic bulge sources make a northern site less favourable for microlensing planet searches. However, there are potentially a large number of northern 1-m class telescopes that could devote a few hours per night to monitor ongoing microlensing events. Our IAC observations indicate that accuracies sufficient to detect planets can be achieved despite the higher airmass.

On roughness measurement by angular speckle correlation

In this work, the influence of both characteristics of the lens and misalignment of the incident beams on roughness measurement is presented. To investigate how the focal length and diameter affect the degree of correlation between the speckle patterns, a set of experiments with different lenses is performed. On the other hand, the roughness when the beams separated by an amount are non-coincident at the same point on the sample is measured. To conclude the study, the uncertainty of the method is calculated.

Scaling in Soil and Other Complex Porous Media

Scaling is becoming an increasingly important topic in the earth and environmental sciences as researchers attempt to understand complex natural systems through the lens of an ever-increasing set of methods and scales. The guest editors introduce the papers in this issue’s special section and present an overview of some of the work being done. Scaling remains one of the most challenging topics in earth and environmental sciences, forming a basis for our understanding of process development across the multiple scales that make up the subsurface environment. Tremendous progress has been made in discovery, explanation, and applications of scaling. And yet much more needs to be done and is being done as part of the modern quest to quantify, analyze, and manage the complexity of natural systems. Understanding and succinct representation of scaling properties can unveil underlying relationships between system structure and response functions, improve parameterization of natural variability and heterogeneity, and help us address societal needs by effectively merging knowledge acquired at different scales.

Microfabrication processes for microfluidic devices on a single laser Workstation: direct writing lithography on SU-8, laser ablation on polymers and mask manufacturing

We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing of a variety of microfluidic devices, including SU-8 microchannels on silicon wafers and 3D complex structures made on polyimide Kapton® or poly carbonate (PC). The workstation combines a KrF excimer laser at 248 nm and a Nd3+:YVO4 DPSS with a frequency tripled at 355 nm with a lens magnification 10X, both lasers working at a pulsed regime with nanoseconds (ns) pulse duration. Workstation also includes a high-resolution motorized XYZ-tilt axis (~ 1 um / axis) and a Through The Lens (TTL) imaging system for a high accurate positioning over a 120 x 120 mm working area. We have surveyed different fabrication techniques: direct writing lithography,mask manufacturing for contact lithography and polymer laser ablation for complex 3D devices, achieving width channels down to 13μ m on 50μ m SU-8 thickness using direct writing lithography, and width channels of 40 μm for polyimide on SiO2 plate. Finally, we have tested the use of some devices for capillary chips measuring the flow speed for liquids with different viscosities. As a result, we have characterized the presence of liquid in the channel by interferometric microscopy.