Estudio de modelos de propagación en bandas milimétricas para su futura utilización en redes de comunicaciones móviles 5G

La generalización del uso de dispositivos móviles, con su consiguiente aumento del tráfico de datos, está generando una demanda cada vez mayor de bandas de frecuencia para el despliegue de sistemas de comunicación inalámbrica, así como una creciente congestión en las bandas bajas del espectro (hasta 3 GHz). Entre las posibles soluciones a este problema, se ha propuesto que la próxima generación de sistemas celulares, 5G, hagan uso de la banda milimétrica, entre 30 GHz y 300 GHz, donde hay anchos de banda contiguos disponibles con tamaños muy difíciles de encontrar en las frecuencias en uso en la generación actual. Este Proyecto de Fin de Grado tiene como finalidad estudiar la viabilidad del despliegue de sistemas celulares en dicha banda, basándose en los estudios tanto empíricos como teóricos ya publicados, así como en las recomendaciones de la UIT donde se estudian las características de propagación en estas bandas. En un siguiente apartado, se han analizado los documentos disponibles de los distintos proyectos y grupos, como pueden ser METIS-2020, impulsado por la Comisión Europea o IMT-2020 promovido por la UIT, dedicados a definir los futuros estándares de comunicación y sus características, así como la evolución de los actuales. Aparte del trabajo de documentación, se han realizado una serie de simulaciones. En primer lugar, se ha utilizado MATLAB para estudiar el comportamiento y la atenuación de la onda electromagnética a las frecuencias de interés en diferentes ubicaciones y climas, tanto en ubicaciones habituales como extremas, estudiándose los efectos de los gases atmosféricos y los hidrometeoros. También se ha utilizado software de planificación radioeléctrica profesional para hacer estudios de cobertura en entornos tanto urbanos, entre ellos Madrid o Barcelona, suburbanos, como Tres Cantos (Madrid) y O Barco de Valdeorras (Orense), y rurales como Valdefuentes (Cáceres) y Quiruelas de Vidriales (Zamora). Por último se han recogido todos los resultados, tanto los provenientes de los estudios como los obtenidos de nuestras propias simulaciones, y se ha realizado un breve comentario, comparando estos y analizando su impacto para posibles despliegues futuros de redes 5G. ABSTRACT. The generalization of mobile device use, with its associated data traffic growth, is generating a growing demand of spectrum for its use in the deployment of wireless telecommunication systems, and a growing congestion in the lower end of the spectrum (until 3 GHz). Among the possible solutions for this problem, it has been proposed that the next generation of cellular systems, 5G, makes use of the millimeter band, between 30 GHz and 300 GHz, where there are contiguous bandwidths with sizes hardly available in the bands used in the present. This Project aims to study the feasibility of cellular system deployments in said band, based on published empirical and theoretical studies and papers, and the ITU recommendations, where the propagation characteristics in those bands are studied. In the next section, available documentation coming from the different study groups and projects like METIS 2020 promoted by the European Commission, or IMT-2020, promoted by the ITU has been studied. In the documentation, future telecommunication standards and its characteristics and the evolution of the current ones are defined. Besides the documentation work, a series of simulations have been carried out. First, MATLAB has been used to study the behavior and attenuation of the electromagnetic wave at the frequencies of interest in different locations and climates, studying the effects of atmospheric gasses and hydrometeors in conventional and extreme locations. Industry standard radioelectric planning software has been used to study the coverage in different environments, such as urban locations like Madrid and Barcelona, both in Spain, suburban locations like Tres Cantos (Madrid, Spain) and O Barco de Valdeorras (Orense, Spain) and rural locations such as Valdefuentes (Cáreces, Spain) and Quiruelas de Vidriales (Zamora, Spain). Finally, all the results, both from the documentation and our own simulations, have been collected, and a brief commentary has been made, comparing those results and their possible impact in the future deployment of 5G networks.

Standards and specifications to manage accessibility issues in e-learning

Despite the acknowledged need of providing a personalized and adaptive learning process for all, current learning management systems do not properly cover personalization and accessibility issues and they are still struggling to support the reusability requirements coming from the pervasive usage of standards. There is a lack of frameworks for providing layered-based infrastructure covering the interoperability required to manage the whole range of standards, applications and services needed to meet accessibility and adaptations needs of lifelong learning services.

A new approach for publishing workflows: abstractions, standards, and linked data

In recent years, a variety of systems have been developed that export the workflows used to analyze data and make them part of published articles. We argue that the workflows that are published in current approaches are dependent on the specific codes used for execution, the specific workflow system used, and the specific workflow catalogs where they are published. In this paper, we describe a new approach that addresses these shortcomings and makes workflows more reusable through: 1) the use of abstract workflows to complement executable workflows to make them reusable when the execution environment is different, 2) the publication of both abstract and executable workflows using standards such as the Open Provenance Model that can be imported by other workflow systems, 3) the publication of workflows as Linked Data that results in open web accessible workflow repositories. We illustrate this approach using a complex workflow that we re-created from an influential publication that describes the generation of 'drugomes'.

First steps in the discovery of patterns in the academic results of telecommunication engineering students in the subjects Analysis of Circuits and Mathematics

In this paper, the results of six years of research in engineering education, in the application of the European Higher Education Area (EHEA) to improve the performance of the students in the subject Analysis of Circuits of Telecommunication Engineering, are analysed taking into consideration the fact that there would be hidden variables that both separate students into subgroups and show the connection among several basic subjects such as Analysis of Circuits (AC) and Mathematics (Math). The discovery of these variables would help us to explain the characteristics of the students through the teaching and learning methodology, and would show that there are some characteristics that instructors do not take into account but that are of paramount importance

Aeronautical Metadata Profile based on Geographic International Standards

The aeronautical information plays an essential rolein air safety, chief objective of the aeronautical industry. Community policies and projects are being currently developed for the adequate management of a single European air space. To make this possible, an appropriate information management and a set of tools that allow sharing and exchanging this information, ensuring its interoperability and integrity, are necessary. This paper presents the development and implementation of a metadata profile for description of the aeronautical information based on international regulations and recommendations applied within the geographic scope. The elements taken into account for its development are described, as well as the implementation process and the results obtained.

Quantum optical signals in telecommunication networks

Introducción a una red óptica metropolitana cuántica donde señales cuánticas y convencionales son multiplexadas en longitud de onda utilizando bandas separadas del espectro óptico. El enrutado se realiza con componentes pasivos para no perturbar los qubits. Se estudian dos redes: red de acceso WDM-PON y red metropolitana completa con backbone DWDM y redes de acceso WDM-PON.

Integrating QKD in telecommunication networks.

Discusión y experimentos sobre la integración de QKD en dos tipos de red de telecomunicaciones típicas en área metropolitana: red de backbone y red de acceso GPON.

Competence assessment of final year projects for undergraduate telecommunication students

The value of project-based learning has lead to the inclusion of project development activities in engineering courses, being the Final Year Project (FYP) the most remarkable one. Several approaches have been proposed for assessing and grading FYPs but, among them, rubrics are becoming a standard for such type of assessment. However, due to the different characteristics and orientations of the projects (some are more practically oriented, some more theoretically), and the high amount of different competences to be evaluated (knowledge, working capability, communication skills, etc.), the definition of one unique rubric suitable for the evaluation of all FYPs presented in different degree programs, is a big challenge. In a former work, the educational outcomes expected from the FYP were defined and resulted in a proposal for their assessment. Afterwards, the proposal has been tested during one year within an educational innovation-project at the Universidad Politécnica de Madrid which involved the follow-up of 8 undergraduate telecommunication students elaborating their FYPs. In this publication, our experience will be described, based on the emerging work taking place through the formalisation of the process which consisted in the following steps: i) establishment of a schedule for the whole process (publication of FYPs topics, selection of applying students and their enrolment, assignation of a jury to each FYP, elaboration and follow-up of FYPs, final report submission, oral presentation, etc.); ii) design of rubrics for each of three assessment parts: working process, final report and oral presentation; and iii) follow-up and evaluation of the involved FYPs. Finally, problems that appeared during this experience (e.g. administrative aspects, criticisms and suggestions from the students, tutors and juries involved) are discussed and some modifications in the assessment system will be proposed in order to solve or minimize these problems.

Five-year results of a slant-path propagation experiment at 20 GHz in Madrid

Satellite operators are starting to use the Ka-band (30/20 GHz) for communications systems requiring higher traffic capacity. The use of this band is expected to experience a significant growth in the next few years, as several operators have reported plans to launch new satellites with Ka-band capacity. It is worth mentioning the Ka-Sat satellite in Europe, launched in 2010, and ViaSat-1, of 2011, with coverage of USA1. Some other examples can be found in other parts of the World. Recent satellite communications standards, such as DVB-S22 or DVB-RCS3, which provide means to mitigate propagation impairments, have been developed with the objective of improving the use of the Ka-band, in comparison with previous technical standards. In the next years, the ALPHASAT satellite will bring about new opportunities4 for carrying out propagation and telecommunication experiments in the Ka- and Q/V-bands. Commercial uses are focused on the provision of high speed data communications, for Internet access and other applications. In the near future, it is expected that higher and higher data rates will also be needed to broadcast richer multimedia contents, including HD-TV, interactive content or 3D-TV. All of these services may be provided in the future by satellites of the current generation, whose life span can extend up to 2025 in some cases. Depending on local regulations, the available bandwidth for the satellite fixed and broadcasting services in the Ka-band is in excess of several hundred MHz, bidirectional, comprising more than 1 GHz for each sub-band in some cases. In this paper, the results of a propagation experiment that is being carried out at Universidad Politécnica de Madrid (UPM), Spain, are presented5. The objective of the experiment is twofold: gathering experimental time series of attenuation and analyzing them in order to characterize the propagation channel at these frequencies6. The experiment and statistical results correspond to five complete years of measurements. The experiment is described in more detail in Section II. Yearly characteristics of rain attenuation are presented in Section III, whereas Section IV is dedicated to the monthly, seasonal, and hourly characteristics. Section V covers the dynamic characteristics of this propagation effect, just before the conclusions are described in Section VI.

Lexical phrases in telecommunication blogs: a genre analysis

The study presented in this paper aims to provide a description of telecommunication blogs as a genre. Lexical phrases are analysed in order to reach conclusions regarding the nature of the language in these texts and the extent to which the results obtained are comparable with other written or conversational discourse types. Although the departing hypothesis is that the articles in blogs are basically transactional and their main objective is to transfer information, the conclusions point to interaction as a distinctive characteristic of this type of discourse and also to a more careful organization in the comments to the blogs entries than originally expected. RESUMEN. Este trabajo presenta una descripción de los blogs de Telecomunicación como género. A través del análisis de frases léxicas se llega a conclusiones sobre algunas de las características que definen la lengua que se usa en este tipo de textos y se comparan los resultados obtenidos con otros previos sobre el discurso escrito y el conversacional. Aunque la hipótesis de partida es que los artículos de los blogs son básicamente transaccionales, donde el principal objetivo es transmitir información, los resultados llevan a conclusiones sobre la importancia de la interacción en este tipo de discurso y también apuntan a una mayor organización de la esperable en las entradas de los comentarios al artículo principal del blog.

Impact of standards in European open data catalogues: a multilingual perspective of DCAT

Within the European Union, member states are setting up official data catalogues as entry points to access PSI (Public Sector Information). In this context, it is important to describe the metadata of these data portals, i.e., of data catalogs, and allow for interoperability among them. To tackle these issues, the Government Linked Data Working Group developed DCAT (Data Catalog Vocabulary), an RDF vocabulary for describing the metadata of data catalogs. This topic report analyzes the current use of the DCAT vocabulary in several European data catalogs and proposes some recommendations to deal with an inconsistent use of the metadata across countries. The enrichment of such metadata vocabularies with multilingual descriptions, as well as an account for cultural divergences, is seen as a necessary step to guarantee interoperability and ensure wider adoption.

Differences brick facade design to horizontal loads between the Spanish and European standards

Brick facades are a construction type, strongly linked to local construction characteristics and methods. In Spain, particularly in Castilla, the facades have been built since the '80s with Castilian half foot (11.5 cm), resting on the edge of slabs. The design of these facades, to horizontal loads from wind, depending on the codes used, can lead to completely different valid solutions. Applying same loads, the facades studied with current European standard (Eurocode 6), have a maximum length of 7.1 m between supports, while the Spanish code, Technical Building Code - Structural Safety Masonry, (CTE SE-F), 8.4 m can be achieved. This represents an increase of flexural strength, depending on the calculation model used, which can reach until 8 times. This is due to the difference of the calculation method and the structural model in one and another standard, depending on if this facade is analyzed as a vertical or horizontal beam or by formation of a vertical or horizontal archh. This paper analyzes the constructive solution of the brick facades that results from applying Spanish or European standards and how it affects the model applied in the safety of the resulting facade.

Application of Agent Technology for Fault Diagnosis of Telecommunication Networks

La presente tesis doctoral contribuye al problema del diagnóstico autonómico de fallos en redes de telecomunicación. En las redes de telecomunicación actuales, las operadoras realizan tareas de diagnóstico de forma manual. Dichas operaciones deben ser llevadas a cabo por ingenieros altamente cualificados que cada vez tienen más dificultades a la hora de gestionar debidamente el crecimiento exponencial de la red tanto en tamaño, complejidad y heterogeneidad. Además, el advenimiento del Internet del Futuro hace que la demanda de sistemas que simplifiquen y automaticen la gestión de las redes de telecomunicación se haya incrementado en los últimos años. Para extraer el conocimiento necesario para desarrollar las soluciones propuestas y facilitar su adopción por los operadores de red, se propone una metodología de pruebas de aceptación para sistemas multi-agente enfocada en simplificar la comunicación entre los diferentes grupos de trabajo involucrados en todo proyecto de desarrollo software: clientes y desarrolladores. Para contribuir a la solución del problema del diagnóstico autonómico de fallos, se propone una arquitectura de agente capaz de diagnosticar fallos en redes de telecomunicación de manera autónoma. Dicha arquitectura extiende el modelo de agente Belief-Desire- Intention (BDI) con diferentes modelos de diagnóstico que gestionan las diferentes sub-tareas del proceso. La arquitectura propuesta combina diferentes técnicas de razonamiento para alcanzar su propósito gracias a un modelo estructural de la red, que usa razonamiento basado en ontologías, y un modelo causal de fallos, que usa razonamiento Bayesiano para gestionar debidamente la incertidumbre del proceso de diagnóstico. Para asegurar la adecuación de la arquitectura propuesta en situaciones de gran complejidad y heterogeneidad, se propone un marco de argumentación que permite diagnosticar a agentes que estén ejecutando en dominios federados. Para la aplicación de este marco en un sistema multi-agente, se propone un protocolo de coordinación en el que los agentes dialogan hasta alcanzar una conclusión para un caso de diagnóstico concreto. Como trabajos futuros, se consideran la extensión de la arquitectura para abordar otros problemas de gestión como el auto-descubrimiento o la auto-optimización, el uso de técnicas de reputación dentro del marco de argumentación para mejorar la extensibilidad del sistema de diagnóstico en entornos federados y la aplicación de las arquitecturas propuestas en las arquitecturas de red emergentes, como SDN, que ofrecen mayor capacidad de interacción con la red. ABSTRACT This PhD thesis contributes to the problem of autonomic fault diagnosis of telecommunication networks. Nowadays, in telecommunication networks, operators perform manual diagnosis tasks. Those operations must be carried out by high skilled network engineers which have increasing difficulties to properly manage the growing of those networks, both in size, complexity and heterogeneity. Moreover, the advent of the Future Internet makes the demand of solutions which simplifies and automates the telecommunication network management has been increased in recent years. To collect the domain knowledge required to developed the proposed solutions and to simplify its adoption by the operators, an agile testing methodology is defined for multiagent systems. This methodology is focused on the communication gap between the different work groups involved in any software development project, stakeholders and developers. To contribute to overcoming the problem of autonomic fault diagnosis, an agent architecture for fault diagnosis of telecommunication networks is defined. That architecture extends the Belief-Desire-Intention (BDI) agent model with different diagnostic models which handle the different subtasks of the process. The proposed architecture combines different reasoning techniques to achieve its objective using a structural model of the network, which uses ontology-based reasoning, and a causal model, which uses Bayesian reasoning to properly handle the uncertainty of the diagnosis process. To ensure the suitability of the proposed architecture in complex and heterogeneous environments, an argumentation framework is defined. This framework allows agents to perform fault diagnosis in federated domains. To apply this framework in a multi-agent system, a coordination protocol is defined. This protocol is used by agents to dialogue until a reliable conclusion for a specific diagnosis case is reached. Future work comprises the further extension of the agent architecture to approach other managements problems, such as self-discovery or self-optimisation; the application of reputation techniques in the argumentation framework to improve the extensibility of the diagnostic system in federated domains; and the application of the proposed agent architecture in emergent networking architectures, such as SDN, which offers new capabilities of control for the network.

Neutron field characteristics of Ciemat's Neutron Standards Laboratory Hector Rene Vega-Carrillo

Monte Carlo calculations were carried out to characterize the neutron field produced by the calibration neutron sources of the Neutron Standards Laboratory at the Research Center for Energy, Environment and Technology (CIEMAT) in Spain. For 241AmBe and 252Cf neutron sources, the neutron spectra, the ambient dose equivalent rates and the total neutron fluence rates were estimated. In the calibration hall, there are several items that modify the neutron field. To evaluate their effects different cases were used, from point-like source in vacuum up to the full model. Additionally, using the full model, the neutron spectra were estimated to different distances along the bench; with these spectra, the total neutron fluence and the ambient dose equivalent rates were calculated. The hall walls induce the largest changes in the neutron spectra and the respective integral quantities. The free-field neutron spectrum is modified due the room return effect.