Aplicación de lectoescritura para dispositivos con Sistema Operativo Android

El presente proyecto pretende ser una herramienta para la enseñanza de la lectoescritura (enseñar a leer y a escribir) para niños con discapacidad, haciendo para ello uso de una aplicación que se ejecuta en una tablet con Sistema Operativo (S.O.) Android. Existe un vacío en el mundo de las aplicaciones para tabletas en este campo en el que se intentará poner un grano de arena para, al menos, tener una aplicación que sirva de toma de contacto a los interesados en este campo. Para establecer las funcionalidades más adecuadas al propósito de la herramienta, se ha consultado a profesionales de la logopedia de un colegio de educación especial, con cuya colaboración se ha dado forma a la estructura de la misma. La implementación de la aplicación se ha llevado a cabo con programación en entorno Java para Android. Se han incluido diferentes recursos como imágenes, pictogramas y locuciones tanto elementos con licencia libre, como elementos propios generados ‘ex profeso’ para dar la forma final a la herramienta. Podemos decir que en general esta aplicación puede ser usada para enseña a leer y escribir a cualquier niño, pero se ha dotado de unas ciertas características que la confieren una orientación especial hacia niños con necesidades educativas especiales. Para ello se ha cuidado mucho la estética, para que ésta sea lo más simple y suave posible, para hacer especial hincapié en la atención de los niños y evitar su distracción con elementos visuales innecesarios. Se ha dotado de estímulos visuales y sonoros para fomentar su interés (aplausos en caso de acierto, colores para diferenciar aciertos y errores, etc.). Se han utilizado los tamaños de letra más grandes posibles (para las discapacidades visuales), etc. El mercado cuenta con una ingente cantidad de dispositivos Android, con características muy dispares, de tamaño de pantalla, resolución y versiones del S.O. entre otras. La aplicación se ha desarrollado tratando de dar cobertura al mayor porcentaje de ellos posible. El requisito mínimo de tamaño de pantalla sería de siete pulgadas. Esta herramienta no tiene demasiado sentido en dispositivos con pantallas menores por las características intrínsecas de la misma. No obstante se ha trabajado también en la configuración para dispositivos pequeños, como “smartphones”, no por su valor como herramienta para la enseñanza de la lectoescritura (aunque en algunos casos podría ser viable) sino más bien con fines de prueba y entrenamiento para profesores, padres o tutores que realizarán la labor docente con dispositivos tablet. Otro de los requisitos, como se ha mencionado, para poder ejecutar la aplicación sería la versión mínima de S.O., por debajo de la cual (versiones muy obsoletas) la aplicación sería inviable. Sirva este proyecto pues para cubrir, mediante el uso de la tecnología, un aspecto de la enseñanza con grandes oportunidades de mejora. ----------------------- This Project is aimed to be a tool for teaching reading and writing skills to handicapped children with an Android application. There are no Android applications available on this field, so it is intended to provide at least one option to take contact with. Speech therapy professionals from a special needs school have been asked for the most suitable functions to be included in this tool. The structure of this tool has been made with the cooperation of these professionals. The implementation of the application has been performed through Java coding for Android. Different resources have been included such as pictures, pictograms and sounds, including free licenses resources and self-developed resources. In general, it can be said that this application can be used to teach learning and writing skills to any given kid, however it has been provided of certain features that makes it ideal for children with special educational needs. It has been strongly taken into account the whole aesthetic to be as simple and soft as possible, in order to get attention of children, excluding any visual disturbing elements. It has been provided with sound and visual stimulations, to attract their interest (applauses in cases of correct answers, different colours to differentiate right or wrong answers), etc. There are many different types of Android devices, with very heterogeneous features regarding their screen size, resolution and O.S. version, etc., available today. The application has been developed trying to cover most of them. Minimum screen resolution is seven inches. This tool doesn’t seem to be very useful for smaller screens, for its inner features. Nevertheless, it has been developed for smaller devices as well, like smartphones, not intended to be a tool for teaching reading and writing skills (even it could be possible in some cases), but in a test and training context for teachers, parents or guardians who do the teaching work with tablet devices. Another requirement, as stated before, in order to be able to run the application, it would be the minimum O.S. version, below that (very obsolete versions) the application would become impracticable. Hope this project to be used to fulfill, by means of technology, one area of teaching with great improvement opportunities.

Aplicación de lectoescritura para dispositivos con Sistema Operativo Android

El presente proyecto pretende ser una herramienta para la enseñanza de la lectoescritura (enseñar a leer y a escribir) para niños con discapacidad, haciendo para ello uso de una aplicación que se ejecuta en una tablet con Sistema Operativo (S.O.) Android. Existe un vacío en el mundo de las aplicaciones para tabletas en este campo en el que se intentará poner un grano de arena para, al menos, tener una aplicación que sirva de toma de contacto a los interesados en este campo. Para establecer las funcionalidades más adecuadas al propósito de la herramienta, se ha consultado a profesionales de la logopedia de un colegio de educación especial, con cuya colaboración se ha dado forma a la estructura de la misma. La implementación de la aplicación se ha llevado a cabo con programación en entorno Java para Android. Se han incluido diferentes recursos como imágenes, pictogramas y locuciones tanto elementos con licencia libre, como elementos propios generados ‘ex profeso’ para dar la forma final a la herramienta. Podemos decir que en general esta aplicación puede ser usada para enseña a leer y escribir a cualquier niño, pero se ha dotado de unas ciertas características que la confieren una orientación especial hacia niños con necesidades educativas especiales. Para ello se ha cuidado mucho la estética, para que ésta sea lo más simple y suave posible, para hacer especial hincapié en la atención de los niños y evitar su distracción con elementos visuales innecesarios. Se ha dotado de estímulos visuales y sonoros para fomentar su interés (aplausos en caso de acierto, colores para diferenciar aciertos y errores, etc.). Se han utilizado los tamaños de letra más grandes posibles (para las discapacidades visuales), etc. El mercado cuenta con una ingente cantidad de dispositivos Android, con características muy dispares, de tamaño de pantalla, resolución y versiones del S.O. entre otras. La aplicación se ha desarrollado tratando de dar cobertura al mayor porcentaje de ellos posible. El requisito mínimo de tamaño de pantalla sería de siete pulgadas. Esta herramienta no tiene demasiado sentido en dispositivos con pantallas menores por las características intrínsecas de la misma. No obstante se ha trabajado también en la configuración para dispositivos pequeños, como “smartphones”, no por su valor como herramienta para la enseñanza de la lectoescritura (aunque en algunos casos podría ser viable) sino más bien con fines de prueba y entrenamiento para profesores, padres o tutores que realizarán la labor docente con dispositivos tablet. Otro de los requisitos, como se ha mencionado, para poder ejecutar la aplicación sería la versión mínima de S.O., por debajo de la cual (versiones muy obsoletas) la aplicación sería inviable. Sirva este proyecto pues para cubrir, mediante el uso de la tecnología, un aspecto de la enseñanza con grandes oportunidades de mejora. ABSTRACT. This Project is aimed to be a tool for teaching reading and writing skills to handicapped children with an Android application. There are no Android applications available on this field, so it is intended to provide at least one option to take contact with. Speech therapy professionals from a special needs school have been asked for the most suitable functions to be included in this tool. The structure of this tool has been made with the cooperation of these professionals. The implementation of the application has been performed through Java coding for Android. Different resources have been included such as pictures, pictograms and sounds, including free licenses resources and self-developed resources. In general, it can be said that this application can be used to teach learning and writing skills to any given kid, however it has been provided of certain features that makes it ideal for children with special educational needs. It has been strongly taken into account the whole aesthetic to be as simple and soft as possible, in order to get attention of children, excluding any visual disturbing elements. It has been provided with sound and visual stimulations, to attract their interest (applauses in cases of correct answers, different colours to differentiate right or wrong answers), etc. There are many different types of Android devices, with very heterogeneous features regarding their screen size, resolution and O.S. version, etc., available today. The application has been developed trying to cover most of them. Minimum screen resolution is seven inches. This tool doesn’t seem to be very useful for smaller screens, for its inner features. Nevertheless, it has been developed for smaller devices as well, like smartphones, not intended to be a tool for teaching reading and writing skills (even it could be possible in some cases), but in a test and training context for teachers, parents or guardians who do the teaching work with tablet devices. Another requirement, as stated before, in order to be able to run the application, it would be the minimum O.S. version, below that (very obsolete versions) the application would become impracticable. Hope this project to be used to fulfill, by means of technology, one area of teaching with great improvement opportunities.

La introducción del hormigón armado en España: razón constructiva de su evolución

España se incorporó a la técnica del hormigón armado con más de dos décadas de retraso respecto a Francia o Alemania. En 1890, en Europa se construían ya estructuras de hormigón armado de cierta envergadura y complejidad. En España hubo que esperar hasta 1893 para la primera obra en hormigón armado, que fue un sencillo depósito descubierto en Puigverd (Lérida), ejecutado por el ingeniero militar Francesc Macià con patente Monier. En 1898, de la mano de Hennebique, se empezó la construcción de los dos primeros edificios con estructura de hormigón armado en España. Fueron dos obras puntuales, con proyectos importados de Francia, pero necesarias para introducir de manera definitiva el material. En paralelo, en París, se estaban edificando en hormigón armado la mayoría de los pabellones de la Exposición Universal de 1900. En el cambio de siglo, las construcciones de hormigón armado habían alcanzado ya la madurez proyectual y técnica en Europa. A pesar de la incorporación tardía, se puede constatar por las obras ejecutadas que en un periodo corto de tiempo, entre 1901 y 1906, se alcanzó en España prácticamente el mismo nivel técnico y constructivo que tenían el resto de los países que fueron pioneros en el empleo del hormigón armado. El desarrollo e implantación de una técnica constructiva no es un proceso lineal, y son muchos los factores que intervienen. Las patentes tuvieron una gran importancia en el desarrollo inicial del hormigón armado. Estas ofrecían un producto que funcionaba. Las primeras estructuras de hormigón armado no se calculaban y se construían siguiendo una reglamentación, se compraban. Y el resultado de esa “compra” solía ser, en la mayoría de los casos, satisfactorio. Las patentes vendían sistemas estructurales cuyo funcionamiento estaba corroborado por la experiencia y la pericia de su inventor. Esta investigación parte de la hipótesis de que las patentes sobre cemento y hormigón armado depositadas en España entre 1884 y 1906 fueron uno de los factores que proporcionaron a los técnicos y a las empresas españolas una pericia constructiva sólida en el empleo del hormigón armado. En este trabajo se aborda el estudio del proceso de introducción del hormigón armado en España desde una perspectiva fundamentalmente técnica, incorporando las patentes como una de las razones constructivas que explican su rápida evolución y generalización en un periodo de tiempo breve: 1901-1906. En este proceso se contextualiza y analiza una de las figuras que se considera fundamental en los primeros años del hormigón armado en España, la del ingeniero Juan Manuel de Zafra y Estevan. Esta tesis analiza las patentes de hormigón armado desde el punto de vista estadístico y constructivo. Desde ambas perspectivas se verifica la hipótesis de partida de esta investigación, concluyendo que las patentes fueron una de las razones constructivas de la evolución del hormigón armado en España y de su rápida implantación. ABSTRACT Spain incorporated the reinforced concrete technique more than two decades after France and Germany. In central Europe reinforced concrete structures of considerable size and complexity were being built in 1890, while in Spain it was not until 1893 that the first work, a simple open air water tank, was implemented in Puigverd (Lleida) by the military engineer Francesc Macià with a Monier patent. In 1898 the construction of the first two buildings with reinforced concrete structure in Spain started, with the guidance by Hennebique. They were two isolated cases with projects imported from France, but playing a key role to definitively introduce the material in Spain. In parallel, in Paris, most of the pavilions of the 1900 World Expo were being built in reinforced concrete. At the turn of the century reinforced concrete buildings had reached maturity both as a technology and as a design practice. Despite the late assumption of the material, the works carried out in the very short period between 1901 and 1906 clearly show that Spain reached practically the same technical and constructive level as the other pioneering countries in the use of reinforced concrete. The development and implementation of a constructive technique is never a linear process, there are many factors involved. The patents offered a successful product. Initial reinforced concrete structures were not calculated and built according to regulations, they were bought. And this purchase in most cases was satisfactory for the required use. Patents sold structural systems whose performance was supported by the experience and expertise of its inventor. The hypothesis of this research is based upon the assumption that the cement and concrete patents registered in Spain between 1884 and 1906 were one of the factors that provided Spanish technicians and companies with a solid constructive expertise in the use of reinforced concrete. This investigation studies the introduction of reinforced concrete to Spain from a predominantly technical perspective, incorporating patents as the constructive reason for the rapid evolution and spread in such a short period of time: 1901-1906. Along the way, the role of engineer J. M. de Zafra, generally considered a key agent in the initial years of reinforced concrete in Spain, is contextualized and analyzed. This dissertation analyzes the patents of reinforced concrete from a statistical and constructive point of view. From both perspectives the hypothesis of this research is verified, concluding that patents were one of the constructive reasons for the development of reinforced concrete in Spain.

Multidisciplinary Learning, Another way of Teaching Maths in Engineering

Multidisciplinary training is widely appreciated in industry and business, and nevertheless usually is not addressed in the early stages of most undergraduate programs. We outline here a multidisciplinary course for undergraduates studying engineering in which mathematics would be the common language, the transverse tool. The goal is motivating students to learn more mathematics and as a result, improve the quality of engineering education. The course would be structured around projects in four branches in engineering: mechanical, electrical, civil and bio-tech. The projects would be chosen among a wide variety of topics in engineering practice selected with the guidance of professional engineers. In these projects mathematics should interact with at least two other basic areas of knowledge in engineering: chemistry, computers science, economics, design or physics.

Using Virtual Reality in the teaching of manufacturing processes with material removal in CNC Machine-Tools

This paper presents a methodology for the incorporation of a Virtual Reality development applied to the teaching of manufacturing processes, namely the group of machining processes in numerical control of machine tools. The paper shows how it is possible to supplement the teaching practice through virtual machine-tools whose operation is similar to the 'real' machines while eliminating the risks of use for both users and the machines.

"Innovatio educativa tertio millennio": 12 years evoluting from learning from learning to teaching in courses on educational innovation and collaboration with the UNESCO chair of mining and industrial heritage

Twelve years ago a group of teachers began to work in educational innovation. In 2002 we received an award for educational innovation, undergoing several stages. Recently, we have decided to focus on being teachers of educational innovation. We create a web scheduled in Joomla offering various services, among which we emphasize teaching courses of educational innovation. The “Instituto de Ciencias de la Educacion” in “Universidad Politécnica de Madrid” has recently incorporated two of these courses, which has been highly praised. These courses will be reissued in new calls, and we are going to offer them to more Universities. We are in contact with several institutions, radio programs, the UNESCO Chair of Mining and Industrial Heritage, and we are working with them in the creation of heritage courses using methods that we have developed.

The analytic hierarchy process to support decision-making processes in infrastructure projects with social impact

There is an increasing awareness among all kinds of organisations (in business,government and civil society) about the benefits of jointly working with stakeholders to satisfy both their goals and the social demands placed upon them. This is particularly the case within corporate social responsibility (CSR) frameworks. In this regard, multi-criteria tools for decision-making like the analytic hierarchy process (AHP) described in the paper can be useful for the building relationships with stakeholders. Since these tools can reveal decision-maker’s preferences, the integration of opinions from various stakeholders in the decision-making process may result in better and more innovative solutions with significant shared value. This paper is based on ongoing research to assess the feasibility of an AHP-based model to support CSR decisions in large infrastructure projects carried out by Red Electrica de España, the sole transmission agent and operator of the Spanishelectricity system.

Atmospheric and remote sensing surveys evaluated at the natural analogue "Campo de Calatrava" and its relation with isotopic Radon activity and CO2 flux as strategy for CCS projects

C0 capture and storage (CCS) projects are presently developed to reduce the emission of anthropogenic co2 into the atmosphere. CCS technologies are expected to account for the 20% of the C0 reduction by 2050.The results of this paper are referred to the OXYCFB300 Compostilla Project (European Energy Program for Recover). Since the detection and control of potential leakage from storage formation is mandatory in a project of capture and geological storage of C02 (CCS), geophysical , ground deformation and geochemical monitoring have been carried out to detect potentialleakage, and, in the event that this occurs, identify and quantify it. This monitoring needs to be developed prior, during and after the injection stage. For a correct interpretation and quantification of the leakage, it is essential to establish a pre-injection characterization (baseline)of the area affected by the C02 storage at reservoir level as well as at shallow depth, surface and atmosphere, via soil gas measurements.

Teaching and evaluating mechanical vibrations with Matlab®

The study of the response of mechanical systems to external excitations, even in the simplest cases, involves solving second-order ordinary differential equations or systems thereof. Finding the natural frequencies of a system and understanding the effect of variations of the excitation frequencies on the response of the system are essential when designing mechanisms [1] and structures [2]. However, faced with the mathematical complexity of the problem, students tend to focus on the mathematical resolution rather than on the interpretation of the results. To overcome this difficulty, once the general theoretical problem and its solution through the state space [3] have been presented, Matlab®[4] and Simulink®[5] are used to simulate specific situations. Without them, the discussion of the effect of slight variations in input variables on the outcome of the model becomes burdensome due to the excessive calculation time required. Conversely, with the help of those simulation tools, students can easily reach practical conclusions and their evaluation can be based on their interpretation of results and not on their mathematical skills

Establishing a new paradigm for teaching mathematics at engineering schools

This paper analyzes an ideal model of teaching, thinking after 5-10 years in Universities in the world. We propose the collaborative work for a fruitful learning. According with that, we expose some of our previous projects in this area and some ideas for the ?global education?, focused on the teaching and learning of mathematics to engineering students. Furthermore we explain some of our initiatives for implementing the "Bologna process?. Aspects related to the learning and assessments will be analyzed. The establishment of the new teaching paradigm has to change the learning process and we will suggest some possible initiatives for adapting the learning to the new model. The paper ends by collecting some conclusions.