Viviendas productivas

El presente trabajo recoge los resultados de una investigación sobre la «vivienda productiva», es decir, de la casa como lugar de trabajo. Dicha investigación se ha ocupado de explorar cómo influyen las cotidianeidades doméstico-laborales actuales —junto con sus arquitecturas y los urbanismos que estas generan— en la sociedad, en especial en temas sociales centrales como la construcción de las subjetividades, y de una vida en comunidad. Asimismo, explora cómo podrían influir en un futuro. La hipótesis sobre la que se trabaja, y que finalmente se intenta demostrar, consiste en que, en la territorialidad múltiple de lo laboral, la vivienda, como plataforma doméstica multiusos, productiva y reproductiva de la que muchas personas disponen, desempeña un papel nodal, y es posible que en el futuro su papel sea aún más importante y más visible. La vivienda productiva funciona como una infraestructura urbana desde la cual se construyen diferentes tipos de bienes materiales e inmateriales, pero sobre todo formas de relación, sociales y productivas con otros, además de imaginarios y afectos. La vivienda como infraestructura productiva y reproductiva es tanto «fábrica fundamental de lo social», como nos enseña Silvia Federici, como «fábrica de lo urbano». El trabajo en casa, como parte de diferentes dinámicas «dispersas» del trabajo que se dan en la actualidad, presenta tanto problemáticas y desafíos importantes, como capitales y posibilidades sociales. Por un lado, puede facilitar una absorción de tipo «24/7» vinculada a las lógicas de producción dispersa y consumo dominantes además de la que se da por las dinámicas patriarcales tradicionales, y en múltiples casos situaciones de evidente asimetría y de explotación laboral. También puede propiciar situaciones socialmente extendidas o impuestas de soledad y aislamiento. Sin embargo, está asimismo vinculado al surgimiento de espacios de experimentación tanto en soledad como en compañía, de cooperación y de intercambio, además de a la evidente posibilidad de construir rutinas propias y, por tanto, una subjetividad laboral propia. Por otro lado, frente a la idea general y homogénea del trabajador casero como un sujeto mayoritariamente aislado de su entorno, las jornadas de trabajo de los trabajadores caseros estudiados presentan una gran diversidad. Estas pueden conllevar aislamiento y exclusión, así como acompañar diferentes formas de construcción de una ciudadanía activa, tanto en solitario, como mediante formas de participación activa en la construcción de una vida en comunidad. En esta investigación se analizan, pues, desafíos y oportunidades de estas espacialidades del trabajo y, a través de este análisis, se indaga en el papel de los marcos físicos, organizativos y simbólicos actuales para la vivienda y para la ciudad pensada desde los trabajadores caseros. Al mismo tiempo se exploran nuevos tipos de vivienda y urbanismos que puedan quizás acompañar procesos sociales de inclusión, así como de emancipación, cooperación e intercambio y, en general, nuevas formas de vecindad y bienestar compartido en los ámbitos doméstico-productivos. Metodológicamente, las singularidades presentes en las realidades estudiadas invitan además a explorar protocolos de análisis, métodos de diseño, de gestión y gobierno que, desde lo micro, puedan dialogar con lo cotidiano y sus singularidades. Diego Barajas, autor de la tesis, es arquitecto dedicado a la práctica, a la investigación y la docencia. Su trabajo se focaliza en explorar el carácter mediador de la arquitectura frente a lo cotidiano y sus microrrealidades. Es profesor de proyectos de urbanismo en la IE School of Architecture y es miembro de Husos, una plataforma de investigación y diseño orientada a la innovación en arquitectura y urbanismo, con sede en Madrid. Es el autor del libro Dispersion, A Study of Global Mobility and the Dynamics of a Fictional Urbanism (Episode Publishers, Róterdam, 2003). Sus trabajos teóricos y de investigación han aparecido en libros y revistas internacionales tales como The Domestic and The Foreign in Architecture (010 Publishers, 2008), Public Spheres, a Europan Discussion (Europan9, 2007), Photoespaña 05 (La Fábrica, Madrid, 2005), Domus, Volume, Abitare, Architese, Plot, y Summa+. Su trabajo se ha expuesto en la Bienal de Venecia (selección principal), la Bienal de Róterdam, la Fundación Tapies, Photoespaña, entre otros y es parte de la colección permanente del FRAC Centre en Orleans y del Historisch Museum de Róterdam entre otros. Antes de estudiar en Róterdam, se gradúa con Honores en la Universidad de los Andes en 1999 y su tesis de grado de arquitectura recibe la máxima distinción como proyecto de Grado Meritorio. ABSTRACT The present study records an investigation into the «productive house», or the home as a workplace. This investigation looks at how working from home, its architectures, and the urban dynamics generated around it influence daily life and the construction of society. It also explores what influences home-based work might have in the future, particularly in central themes such as the biopolitical construction of subjectivities and community life. The central hypothesis revolves around the idea that the home, as a multi-use infrastructure that most of us have access to, plays a fundamental role in the contemporary work sphere, due to —or even in spite of— the omnipresence of work in practically every moment and area of our daily lives, and might play a main role in the future. The home functions as a kind of hub from which we create different kinds of material and immaterial goods, but above all relationships with others, both social and productive, as well as imaginaries and affections. The home, as a machine for production and reproduction, is as much a main «factory of the social» as Silvia Federici describes it, as a «factory of the urban». Working from home, as one of several «dispersed» work dynamics that are part of the contemporary world of work, presents as many important problematics and challenges as it does possibilities and social capital. On the one hand, it can contribute to kind of «24/7» absorption linked both to the logistics of the current dispersed production and consumption, and to that of traditional patriarchal dynamics, and in some cases even clearly asymmetrical situations that exploit the workforce. It can also lead to the socially widespread phenomena of isolation and loneliness, at times imposed upon home-based workers. However, by the same token, it is also linked to the growth of experimental spaces of cooperation and exchange, both solitary and in company, as well as the clear possibility of constructing individualised routines and, therefore, a personal laboural subjectivity. On the other hand, contrary to the generalised, homogenous idea of a home-based worker who is mostly isolated from his or her environment, the working days of those we studied went hand in hand with different ways of building subjectivities. This could be as much in exclusion and isolation as through building an active citizenship, at times in solitary and at times actively participating in the construction of communal life. In this investigation, therefore, the challenges and opportunities of the home as workplace have been analysed, and through this analysis we have inquired into the role of current physical, organisational and symbolic frameworks for the home and for the city from the perspective of home workers. At the same time we have explored new types of homes and of town planning that could perhaps accompany social processes of diversity and inclusion as well as emancipation, cooperation and exchange and, in general, new forms of shared welfare in productive domestic environments. Methodologically, the singularities present in the cases studied also invite us to explore protocols of analysis, methods of design, management and government that, from the micro level, could dialogue with the peculiarities of day-to-day life. The author of this thesis, Diego Barajas, is an architect dedicated to practice, investigation and teaching. His work is focussed on exploring the mediating nature of architecture and the built environment in terms of daily life and its microrealities. He is professor of urban projects at the IE School of Architecture and member of Husos, a platform for investigation and town planning based in Madrid. He is the author of the book Dispersion, A Study of Global Mobility and the Dynamics of a Fictional Urbanism (Episode Publishers, Rotterdam, 2003) and his theoretical works and investigations have appeared in books such as The Domestic and The Foreign in Architecture (010 Publishers, 2008), Public Spheres, a Europan Discussion (Europan9, 2007), Photoespaña 05 (La Fábrica, Madrid, 2005), and in international magazines such as Domus, Volume, Abitare, Architese, Plot and Summa+. His work has been exhibited in places such as the Venice Biennial (main selection), the Rotterdam Biennial, the Tapies Foundation and Photoespaña, among others, and forms part of the permanent collection of the FRAC Centre in Orleans and the Historisch Museum of Rotterdam. Before studying in Rotterdam, he graduated with Honours from the University of the Andes in 1999, and his architecture degree thesis received the maximum distinction of Meritorious Graduation Project.

Work in progress - Exploiting videoconferencing possibilities to promote the European convergence process

This paper introduces the experience of using videoconferencing and recording as a mechanism to support courses which need to be promoted or discontinued within the framework of the European convergence process. Our objective is to make these courses accessible as live streaming during the lessons as well as recorded lectures and associated documents available to the students as soon as the lesson has finished. The technology used has been developed in our university and it is all open source. Although this is a technical project the key is the human factor involved. The people managing the virtual sessions are students of the courses being recorded. However, they lack technical knowledge, so we had to train them in audiovisuals and enhance the usability of the videoconferencing tool and platform. The validation process is being carried out in five real scenarios at our university. During the whole period we are evaluating technical and pedagogical issues of this experience for both students and teachers to guide the future development of the service. Depending on the final results, the service of lectures recording will be available as educational resource for all of the teaching staff of our university.

Teaching Magnetic Design using CAD tools

Design of magnetic components is a multivariable problem. There are many different combinations of shapes, sizes and materials for the core with many diameters for the wires. So it is difficult to find the optimum design without a great number of iterations. Analytically only a few combinations are usually studied but it is very easy to take into account all the combinations using a CAD tool [1]. In this work the CAD tool used is PExprt (ANSYS [2]) which is being developed at UPMCEI.

Student Reciprocal Peer Teaching as a Method for Active Learning: An Experience in an Electrotechnical Laboratory

Active learning is one of the most efficient mechanisms for learning, according to the psychology of learning. When students act as teachers for other students, the communication is more fluent and knowledge is transferred easier than in a traditional classroom. This teaching method is referred to in the literature as reciprocal peer teaching. In this study, the method is applied to laboratory sessions of a higher education institution course, and the students who act as teachers are referred to as ‘‘laboratory monitors.’’ A particular way to select the monitors and its impact in the final marks is proposed. A total of 181 students participated in the experiment, experiences with laboratory monitors are discussed, and methods for motivating and training laboratory monitors and regular students are proposed. The types of laboratory sessions that can be led by classmates are discussed. This work is related to the changes in teaching methods in the Spanish higher education system, prompted by the Bologna Process for the construction of the European Higher Education Area

"Innovatio educativa tertio millennio": 12 years evoluting from learning from learning to teaching in courses on educational innovation and collaboration with the UNESCO chair of mining and industrial heritage

Twelve years ago a group of teachers began to work in educational innovation. In 2002 we received an award for educational innovation, undergoing several stages. Recently, we have decided to focus on being teachers of educational innovation. We create a web scheduled in Joomla offering various services, among which we emphasize teaching courses of educational innovation. The “Instituto de Ciencias de la Educacion” in “Universidad Politécnica de Madrid” has recently incorporated two of these courses, which has been highly praised. These courses will be reissued in new calls, and we are going to offer them to more Universities. We are in contact with several institutions, radio programs, the UNESCO Chair of Mining and Industrial Heritage, and we are working with them in the creation of heritage courses using methods that we have developed.

Teaching in Landscape

“We, the landscape architects, concerned with the future development of our landscapes in a fast changing world, believe that everything, influencing the way in which the outdoor environment is created, used, and maintained is fundamental to sustainable development and human well-being. We, being responsible for the improvement of the education of future landscape architects to enable them to work for a sustainable environment within the context of our natural and cultural heritage”. (IFLA/UNESCO 2005) CHARTER FOR LANDSCAPE ARCHITECTURAL EDUCATION) Nowadays, respect and appreciation of the landscape sustainably grow. Landscape Architecture professionals are makers encourage and guide this growth. However, there is still no legal recognition of the landscape profession in Spain. For this reason we present this paper that shows the current framework in which appear a professional educated with masters and specialized courses, but it lacks a defined work area and unique in its business learned. We present the demands of both IFLA and the EFLA and teaching lines proposed by these organizations at European level are distinguished. Furthermore, we analyze the national scene and major training centres are distinguished.

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Teaching based on the case method of building collective protection

One of the fundamental aspects in the adaptation of the teaching to the European higher education is changing based models of teacher education to models based on student learning. In this work we present an educational experience developed with the teaching method based on the case method, with a clearly multidisciplinary. The experience has been developed in the teaching of analysis and verification of safety rails. This is a multidisciplinary field that presents great difficulties during their teaching. The use of the case method has given good results in the competences achieved by students

Teaching automatic control in non-specialist engineering schools

Automatic Control Teaching in the new degree syllabus has reduced both, its contents and its implementation course, with regard to traditional engineering careers. On the other hand, where the qualification is not considered as automatic control specialist, it is required an adapted methodology to provide the minimum contents that the student needs to assimilate, even in the case that students do not perceive these contents as the most important in their future career. In this paper we present the contents of a small automatic course taught Naval Architecture and Marine Engineering Degrees at the School of Naval Engineering of the Polytechnic University of Madrid. We have included the contents covered using the proposed methodology which is based on practical work after lectures. Firstly, the students performed exercises by hand. Secondly, they solve the exercises using informatics support tools, and finally, they validate their previous results and their knowledge in the laboratory platforms.

Establishing a new paradigm for teaching mathematics at engineering schools

This paper analyzes an ideal model of teaching, thinking after 5-10 years in Universities in the world. We propose the collaborative work for a fruitful learning. According with that, we expose some of our previous projects in this area and some ideas for the ?global education?, focused on the teaching and learning of mathematics to engineering students. Furthermore we explain some of our initiatives for implementing the "Bologna process?. Aspects related to the learning and assessments will be analyzed. The establishment of the new teaching paradigm has to change the learning process and we will suggest some possible initiatives for adapting the learning to the new model. The paper ends by collecting some conclusions.

CAS: A tool for improving autonomous work

The EHEA proposes a student-centered teaching model. Therefore, it seems necessary to actively involve the students in the teaching-learning process. Increasing the active participation of the students is not always easy in mathematical topics, since, when the students just enter the University, their ability to carry out autonomous mathematical work is scarce. In this paper we present some experiences related with the use of Computer Algebra Systems (CAS). All the experiences are designed in order to develop some mathematical competencies and mainly self-learning, the use of technology and team-work. The experiences include some teachers? proposals including: small projects to be executed in small groups, participation in competitions, the design of different CAS-Toolboxes, etc. The results obtained in the experiences, carried out with different groups of students from different engineering studies at different universities, makes us slightly optimistic about the educational value of the model.

Diseño y desarrollo de un sistema basado en Learning Analytics para evaluar la competencia de trabajo en equipo.Design and development of a Learning Analytics System to evaluate group work competence

La adquisición de la competencia grupal es algo básico en la docencia universitaria. Esta tarea va a suponer evaluar diferentes factores en un número elevado de alumnos, lo que puede supone gran complejidad y un esfuerzo elevado. De cara a evitar este esfuerzo se puede pensar en emplear los registros de la interacción de los usuarios almacenados en las plataformas de aprendizaje. Para ello el presente trabajo se basa en el desarrollo de un sistema de Learning Analytics que es utilizado como herramienta para analizar las evidencias individuales de los distintos miembros de un equipo de trabajo. El trabajo desarrolla un modelo teórico apoyado en la herramienta, que permite relacionar las evidencias observadas de forma empírica para cada alumno, con indicadores obtenidos tanto de la acción individual como cooperativo de los miembros de un equipo realizadas a través de los foros de trabajo. Abstract — The development of the group work competence is something basic in university teaching. It should be evaluated, but this means to analyze different issues about the participation of a high number of students which is very complex and implies a lot of effort. In order to facilitate this evaluation it is possible to analyze the logs of students’ interaction in Learning Management Systems. The present work describes the development of a Learning Analytics system that analyzes the interaction of each of the members of working group. This tool is supported by a theoretical model, which allows establishing links between the empirical evidences of each student and the indicators of their action in working forums.