Educating in Project Management: an innovative approach. A shared-experience among Spanish Universities

This work presents an educational formal initiative aimed to monitor the acquisition and strengthening of competences by students that are being taught in project management subject. Groups of students belonging to three universities, embracing different knowledge areas such as engineering, biology, etc., were selected to run the experience. All of them had nevertheless a common and basic starting point: inexperience in project management field. In this scenario, we propose a new theoretical and practical approach oriented to reinforce problem-solving and related competences in a project management subject context. For this purpose, a Project-Based Learning (PjBL) initiative has been specifically designed and developed. The main idea is to bring a real world engineering project management case into the classroom, where students must face up to a completely new learning approach –groups in different locations, collaborative mode and unspecific solution, supported by a powerful internet platform:.project.net (http://www.Project.net). Other relevant aspects such as project climate, knowledge increasing, have also been monitored during the course. Results show and overall improvement in key competences. The obtained information will be used in two ways: to feed the students back about personal opportunities for improvement in specific competences, and to fine-tune the experience for further initiatives.

An improved way for evaluating competences: A different approach to project management learning .;

This paper presents a formal initiative for monitoring the competence acquisition by a team of students with different backgrounds facing the experience of being working by projects and in a project. These students are inexperienced in the project management field and they play this game on a time-shared manner along with other activities. The goal of this experience is to make some improvements in determining the competence levels acquired by means of how the work is being done. The use of this information, which is out of the scope of this particular work, could make possible to bring additional information to the students involved in terms of their individual competencies and the identification of new opportunities of personal improvement.

The use of computers for graduate education in Project Management. Improving the integration to the industry.

This paper presents an initiative for monitoring the competence acquisition by a team of students with different backgrounds facing the experience of being working by projects and in a project. These students are graduated bachelor engineering are inexperienced in the project management field and they play this course on a time-shared manner along with other activities. The goal of this experience is to increase the competence levels acquired by using an structured web based portfolio tool helping to reinforce how relevant different project management approaches can result for final products and how important it becomes to maintain the integration along the project. Monitoring is carried out by means of have a look on how the work is being done and measuring different technical parameters per participant. The use of this information could make possible to bring additional information to the students involved in terms of their individual competencies and the identification of new opportunities of personal improvement. These capabilities are strongly requested by companies in their daily work as well as they can be very convenient too for students when they try to organize their PhD work.

Participatory modelling to support decision making in water management. A case study in the middle Guadiana basin, Spain.

The objective of this research was the implementation of a participatory process for the development of a tool to support decision making in water management. The process carried out aims at attaining an improved understanding of the water system and an encouragement of the exchange of knowledge and views between stakeholders to build a shared vision of the system. In addition, the process intends to identify impacts of possible solutions to given problems, which will help to take decisions.

A multinational SDI-based system to facilitate disaster risk management in the Andean Community

A useful strategy for improving disaster risk management is sharing spatial data across different technical organizations using shared information systems. However, the implementation of this type of system requires a large effort, so it is difficult to find fully implemented and sustainable information systems that facilitate sharing multinational spatial data about disasters, especially in developing countries. In this paper, we describe a pioneer system for sharing spatial information that we developed for the Andean Community. This system, called SIAPAD (Andean Information System for Disaster Prevention and Relief), integrates spatial information from 37 technical organizations in the Andean countries (Bolivia, Colombia, Ecuador, and Peru). SIAPAD was based on the concept of a thematic Spatial Data Infrastructure (SDI) and includes a web application, called GEORiesgo, which helps users to find relevant information with a knowledge-based system. In the paper, we describe the design and implementation of SIAPAD together with general conclusions and future directions which we learned as a result of this work.

Commonalities between networking in multiplayer computer games and negotiation processes in a future multi-layered Air Traffic Management (ATM) system

First, this paper describes a future layered Air Traffic Management (ATM) system centred in the execution phase of flights. The layered ATM model is based on the work currently performed by SESAR [1] and takes into account the availability of accurate and updated flight information ?seen by all? across the European airspace. This shared information of each flight will be referred as Reference Business Trajectory (RBT). In the layered ATM system, exchanges of information will involve several actors (human or automatic), which will have varying time horizons, areas of responsibility and tasks. Second, the paper will identify the need to define the negotiation processes required to agree revisions to the RBT in the layered ATM system. Third, the final objective of the paper is to bring to the attention of researchers and engineers the communalities between multi-player games and Collaborative Decision Making processes (CDM) in a layered ATM system

Participatory modelling to support decision making in water management under uncertainty: Two comparative case studies in the Guadiana river basin, Spain.

A participatory modelling process has been conducted in two areas of the Guadiana river (the upper and the middle sub-basins), in Spain, with the aim of providing support for decision making in the water management field. The area has a semi-arid climate where irrigated agriculture plays a key role in the economic development of the region and accounts for around 90% of water use. Following the guidelines of the European Water Framework Directive, we promote stakeholder involvement in water management with the aim to achieve an improved understanding of the water system and to encourage the exchange of knowledge and views between stakeholders in order to help building a shared vision of the system. At the same time, the resulting models, which integrate the different sectors and views, provide some insight of the impacts that different management options and possible future scenarios could have. The methodology is based on a Bayesian network combined with an economic model and, in the middle Guadiana sub-basin, with a crop model. The resulting integrated modelling framework is used to simulate possible water policy, market and climate scenarios to find out the impacts of those scenarios on farm income and on the environment. At the end of the modelling process, an evaluation questionnaire was filled by participants in both sub-basins. Results show that this type of processes are found very helpful by stakeholders to improve the system understanding, to understand each others views and to reduce conflict when it exists. In addition, they found the model an extremely useful tool to support management. The graphical interface, the quantitative output and the explicit representation of uncertainty helped stakeholders to better understand the implications of the scenario tested. Finally, the combination of different types of models was also found very useful, as it allowed exploring in detail specific aspects of the water management problems.

Applications of Formal Languages to Management of Manned and Unmanned Aircraft

En el futuro, la gestión del tráfico aéreo (ATM, del inglés air traffic management) requerirá un cambio de paradigma, de la gestión principalmente táctica de hoy, a las denominadas operaciones basadas en trayectoria. Un incremento en el nivel de automatización liberará al personal de ATM —controladores, tripulación, etc.— de muchas de las tareas que realizan hoy. Las personas seguirán siendo el elemento central en la gestión del tráfico aéreo del futuro, pero lo serán mediante la gestión y toma de decisiones. Se espera que estas dos mejoras traigan un incremento en la eficiencia de la gestión del tráfico aéreo que permita hacer frente al incremento previsto en la demanda de transporte aéreo. Para aplicar el concepto de operaciones basadas en trayectoria, el usuario del espacio aéreo (la aerolínea, piloto, u operador) y el proveedor del servicio de navegación aérea deben negociar las trayectorias mediante un proceso de toma de decisiones colaborativo. En esta negociación, es necesaria una forma adecuada de compartir dichas trayectorias. Compartir la trayectoria completa requeriría un gran ancho de banda, y la trayectoria compartida podría invalidarse si cambiase la predicción meteorológica. En su lugar, podría compartirse una descripción de la trayectoria independiente de las condiciones meteorológicas, de manera que la trayectoria real se pudiese calcular a partir de dicha descripción. Esta descripción de la trayectoria debería ser fácil de procesar usando un programa de ordenador —ya que parte del proceso de toma de decisiones estará automatizado—, pero también fácil de entender para un operador humano —que será el que supervise el proceso y tome las decisiones oportunas—. Esta tesis presenta una serie de lenguajes formales que pueden usarse para este propósito. Estos lenguajes proporcionan los medios para describir trayectorias de aviones durante todas las fases de vuelo, desde la maniobra de push-back (remolcado hasta la calle de rodaje), hasta la llegada a la terminal del aeropuerto de destino. También permiten describir trayectorias tanto de aeronaves tripuladas como no tripuladas, incluyendo aviones de ala fija y cuadricópteros. Algunos de estos lenguajes están estrechamente relacionados entre sí, y organizados en una jerarquía. Uno de los lenguajes fundamentales de esta jerarquía, llamado aircraft intent description language (AIDL), ya había sido desarrollado con anterioridad a esta tesis. Este lenguaje fue derivado de las ecuaciones del movimiento de los aviones de ala fija, y puede utilizarse para describir sin ambigüedad trayectorias de este tipo de aeronaves. Una variante de este lenguaje, denominada quadrotor AIDL (QR-AIDL), ha sido desarrollada en esta tesis para permitir describir trayectorias de cuadricópteros con el mismo nivel de detalle. Seguidamente, otro lenguaje, denominado intent composite description language (ICDL), se apoya en los dos lenguajes anteriores, ofreciendo más flexibilidad para describir algunas partes de la trayectoria y dejar otras sin especificar. El ICDL se usa para proporcionar descripciones genéricas de maniobras comunes, que después se particularizan y combinan para formar descripciones complejas de un vuelo. Otro lenguaje puede construirse a partir del ICDL, denominado flight intent description language (FIDL). El FIDL especifica requisitos de alto nivel sobre las trayectorias —incluyendo restricciones y objetivos—, pero puede utilizar características del ICDL para proporcionar niveles de detalle arbitrarios en las distintas partes de un vuelo. Tanto el ICDL como el FIDL han sido desarrollados en colaboración con Boeing Research & Technology Europe (BR&TE). También se ha desarrollado un lenguaje para definir misiones en las que interactúan varias aeronaves, el mission intent description language (MIDL). Este lenguaje se basa en el FIDL y mantiene todo su poder expresivo, a la vez que proporciona nuevas semánticas para describir tareas, restricciones y objetivos relacionados con la misión. En ATM, los movimientos de un avión en la superficie de aeropuerto también tienen que ser monitorizados y gestionados. Otro lenguaje formal ha sido diseñado con este propósito, llamado surface movement description language (SMDL). Este lenguaje no pertenece a la jerarquía de lenguajes descrita en el párrafo anterior, y se basa en las clearances (autorizaciones del controlador) utilizadas durante las operaciones en superficie de aeropuerto. También proporciona medios para expresar incertidumbre y posibilidad de cambios en las distintas partes de la trayectoria. Finalmente, esta tesis explora las aplicaciones de estos lenguajes a la predicción de trayectorias y a la planificación de misiones. El concepto de trajectory language processing engine (TLPE) se usa en ambas aplicaciones. Un TLPE es una función de ATM cuya principal entrada y salida se expresan en cualquiera de los lenguajes incluidos en la jerarquía descrita en esta tesis. El proceso de predicción de trayectorias puede definirse como una combinación de TLPEs, cada uno de los cuales realiza una pequeña sub-tarea. Se le ha dado especial importancia a uno de estos TLPEs, que se encarga de generar el perfil horizontal, vertical y de configuración de la trayectoria. En particular, esta tesis presenta un método novedoso para la generación del perfil vertical. El proceso de planificar una misión también se puede ver como un TLPE donde la entrada se expresa en MIDL y la salida consiste en cierto número de trayectorias —una por cada aeronave disponible— descritas utilizando FIDL. Se ha formulado este problema utilizando programación entera mixta. Además, dado que encontrar caminos óptimos entre distintos puntos es un problema fundamental en la planificación de misiones, también se propone un algoritmo de búsqueda de caminos. Este algoritmo permite calcular rápidamente caminos cuasi-óptimos que esquivan todos los obstáculos en un entorno urbano. Los diferentes lenguajes formales definidos en esta tesis pueden utilizarse como una especificación estándar para la difusión de información entre distintos actores de la gestión del tráfico aéreo. En conjunto, estos lenguajes permiten describir trayectorias con el nivel de detalle necesario en cada aplicación, y se pueden utilizar para aumentar el nivel de automatización explotando esta información utilizando sistemas de soporte a la toma de decisiones. La aplicación de estos lenguajes a algunas funciones básicas de estos sistemas, como la predicción de trayectorias, han sido analizadas. ABSTRACT Future air traffic management (ATM) will require a paradigm shift from today’s mainly tactical ATM to trajectory-based operations (TBOs). An increase in the level of automation will also relieve humans —air traffic control officers (ATCOs), flight crew, etc.— from many of the tasks they perform today. Humans will still be central in this future ATM, as decision-makers and managers. These two improvements (TBOs and increased automation) are expected to provide the increase in ATM performance that will allow coping with the expected increase in air transport demand. Under TBOs, trajectories are negotiated between the airspace user (an airline, pilot, or operator) and the air navigation service provider (ANSP) using a collaborative decision making (CDM) process. A suitable method for sharing aircraft trajectories is necessary for this negotiation. Sharing a whole trajectory would require a high amount of bandwidth, and the shared trajectory might become invalid if the weather forecast changed. Instead, a description of the trajectory, decoupled from the weather conditions, could be shared, so that the actual trajectory could be computed from this trajectory description. This trajectory description should be easy to process using a computing program —as some of the CDM processes will be automated— but also easy to understand for a human operator —who will be supervising the process and making decisions. This thesis presents a series of formal languages that can be used for this purpose. These languages provide the means to describe aircraft trajectories during all phases of flight, from push back to arrival at the gate. They can also describe trajectories of both manned and unmanned aircraft, including fixedwing and some rotary-wing aircraft (quadrotors). Some of these languages are tightly interrelated and organized in a language hierarchy. One of the key languages in this hierarchy, the aircraft intent description language (AIDL), had already been developed prior to this thesis. This language was derived from the equations of motion of fixed-wing aircraft, and can provide an unambiguous description of fixed-wing aircraft trajectories. A variant of this language, the quadrotor AIDL (QR-AIDL), is developed in this thesis to allow describing a quadrotor aircraft trajectory with the same level of detail. Then, the intent composite description language (ICDL) is built on top of these two languages, providing more flexibility to describe some parts of the trajectory while leaving others unspecified. The ICDL is used to provide generic descriptions of common aircraft manoeuvres, which can be particularized and combined to form complex descriptions of flight. Another language is built on top of the ICDL, the flight intent description language (FIDL). The FIDL specifies high-level requirements on trajectories —including constraints and objectives—, but can use features of the ICDL to provide arbitrary levels of detail in different parts of the flight. The ICDL and FIDL have been developed in collaboration with Boeing Research & Technology Europe (BR&TE). Also, the mission intent description language (MIDL) has been developed to allow describing missions involving multiple aircraft. This language is based on the FIDL and keeps all its expressive power, while it also provides new semantics for describing mission tasks, mission objectives, and constraints involving several aircraft. In ATM, the movement of aircraft while on the airport surface also has to be monitored and managed. Another formal language has been designed for this purpose, denoted surface movement description language (SMDL). This language does not belong to the language hierarchy described above, and it is based on the clearances used in airport surface operations. Means to express uncertainty and mutability of different parts of the trajectory are also provided. Finally, the applications of these languages to trajectory prediction and mission planning are explored in this thesis. The concept of trajectory language processing engine (TLPE) is used in these two applications. A TLPE is an ATM function whose main input and output are expressed in any of the languages in the hierarchy described in this thesis. A modular trajectory predictor is defined as a combination of multiple TLPEs, each of them performing a small subtask. Special attention is given to the TLPE that builds the horizontal, vertical, and configuration profiles of the trajectory. In particular, a novel method for the generation of the vertical profile is presented. The process of planning a mission can also be seen as a TLPE, where the main input is expressed in the MIDL and the output consists of a number of trajectory descriptions —one for each aircraft available in the mission— expressed in the FIDL. A mixed integer linear programming (MILP) formulation for the problem of assigning mission tasks to the available aircraft is provided. In addition, since finding optimal paths between locations is a key problem to mission planning, a novel path finding algorithm is presented. This algorithm can compute near-shortest paths avoiding all obstacles in an urban environment in very short times. The several formal languages described in this thesis can serve as a standard specification to share trajectory information among different actors in ATM. In combination, these languages can describe trajectories with the necessary level of detail for any application, and can be used to increase automation by exploiting this information using decision support tools (DSTs). Their applications to some basic functions of DSTs, such as trajectory prediction, have been analized.

Gestión intelectual de las prácticas comunicativas en arquitectura : S, M, L, XL, el gran evento = The intellectual management of communication practices in architecture : S, M, L, XL, the big event

La tesis doctoral se centra en la posibilidad de entender que la práctica de arquitectura puede encontrar en las prácticas comunicativas un apoyo instrumental, que sobrepasa cualquier simplificación clásica del uso de los medios como una mera aplicación superficial, post-producida o sencillamente promocional. A partir de esta premisa se exponen casos del último cuarto del siglo XX y se detecta que amenazas como el riesgo de la banalización, la posible saturación de la imagen pública o la previsible asociación incorrecta con otros individuos en presentaciones grupales o por temáticas, han podido influir en un crecimiento notable de la adquisición de control, por parte de los arquitectos, en sus oportunidades mediáticas. Esto es, como si la arquitectura hubiera empezado a superar y optimizar algo inevitable, que las fórmulas expositivas y las publicaciones, o más bien del exponer(se) y publicar(se), son herramientas disponibles para activar algún tipo de gestión intelectual de la comunicación e información circulante sobre si misma. Esta práctica de “autoedición” se analiza en un periodo concreto de la trayectoria de OMA -Office for Metropolitan Architecture-, estudio considerado pionero en el uso eficiente, oportunista y personalizado de los medios. Así, la segunda parte de la tesis se ocupa del análisis de su conocida monografía S,M,L,XL (1995), un volumen que contó con gran participación por parte de sus protagonistas durante la edición, y de cuyo proceso de producción apenas se había investigado. Esta publicación señaló un punto de inflexión en su género alterando todo formato y restricciones anteriores, y se ha convertido en un volumen emblemático para la disciplina que ninguna réplica posterior ha podido superar. Aquí se presenta a su vez como el desencadenante de la construcción de un “gran evento” que concluye en la transformación de la identidad de OMA en 10 años, paradójicamente entre el nacimiento de la Fundación Groszstadt y el arranque de la actividad de AMO, dos entidades paralelas clave anexas a OMA. Este planteamiento deviene de cómo la investigación desvela que S,M,L,XL es una pieza más, central pero no independiente, dentro de una suma de acciones e individuos, así como otras publicaciones, exposiciones, eventos y también artículos ensayados y proyectos, en particular Bigness, Generic City, Euralille y los concursos de 1989. Son significativos aspectos como la apertura a una autoría múltiple, encabezada por Rem Koolhaas y el diseñador gráfico Bruce Mau, acompañados en los agradecimientos de la editora Jennifer Sigler y cerca de una centena de nombres, cuyas aportaciones no necesariamente se basan en la construcción de fragmentos del libro. La supresión de ciertos límites permite superar también las tareas inicialmente relevantes en la edición de una publicación. Un objetivo general de la tesis es también la reflexión sobre relaciones anteriormente cuestionadas, como la establecida entre la arquitectura y los mercados o la economía. Tomando como punto de partida la idea de “design intelligence” sugerida por Michael Speaks (2001), se extrae de sus argumentos que lo esencial es el hallazgo de la singularidad o inteligencia propia de cada estudio de arquitectura o diseño. Asimismo se explora si en la construcción de ese tipo de fórmulas magistrales se alojaban también combinaciones de interés y productivas entre asuntos como la eficiencia y la creatividad, o la organización y las ideas. En esta dinámica de relaciones bidireccionales, y en ese presente de exceso de información, se fundamenta la propuesta de una equivalencia más evidenciada entre la “socialización” del trabajo del arquitecto, al compartirlo públicamente e introducir nuevas conversaciones, y la relación inversa a partir del trabajo sobre la “socialización” misma. Como si la consciencia sobre el uso de los medios pudiera ser efectivamente instrumental, y contribuir al desarrollo de la práctica de arquitectura, desde una perspectiva idealmente comprometida e intelectual. ABSTRACT The dissertation argues the possibility to understand that the practice of architecture can find an instrumental support in the practices of communication, overcoming any classical simplification of the use of media, generally reduced to superficial treatments or promotional efforts. Thus some cases of the last decades of the 20th century are presented. Some threats detected, such as the risk of triviality, the saturation of the public image or the foreseeable wrong association among individuals when they are introduced as part of thematic groups, might have encouraged a noticeable increase of command taken by architects when there is chance to intervene in a media environment. In other words, it can be argued that architecture has started to overcome and optimize the inevitable, the fact that exhibition formulas and publications, or simply the practice of (self)exhibition or (self)publication, are tools at our disposal for the activation of any kind of intellectual management of communication and circulating information about itself. This practice of “self-edition” is analyzed in a specific timeframe of OMA’s trajectory, an office that is considered as a ground-breaking actor in the efficient and opportunistic use of media. Then the second part of the thesis dissects their monograph S,M,L,XL (1995), a volume in which its main characters were deeply involved in terms of edition and design, a process barely analyzed up to now. This publication marked a turning point in its own genre, disrupting old formats and traditional restrictions. It became such an emblematic volume for the discipline that none of the following attempts of replica has ever been able to improve this precedent. Here, the book is also presented as the element that triggers the construction of a “big event” that concludes in the transformation of OMA identity in 10 years. Paradoxically, between the birth of the Groszstadt Foundation and the early steps of AMO, both two entities parallel and connected to OMA. This positions emerge from how the research unveils that S,M,L,XL is one more piece, a key one but not an unrelated element, within a sum of actions and individuals, as well as other publications, exhibitions, articles and projects, in particular Bigness, Generic City, Euralille and the competitions of 1989. Among the remarkable innovations of the monograph, there is an outstanding openness to a regime of multiple authorship, headed by Rem Koolhaas and the graphic designer Bruce Mau, who share the acknowledgements page with the editor, Jennifer Sigler, and almost 100 people, not necessarily responsible for specific fragments of the book. In this respect, the dissolution of certain limits made possible that the expected tasks in the edition of a publication could be trespassed. A general goal of the thesis is also to open a debate on typically questioned relations, particularly between architecture and markets or economy. Using the idea of “design intelligence”, outlined by Michael Speaks in 2001, the thesis pulls out its essence, basically the interest in detecting the singularity, or particular intelligence of every office of architecture and design. Then it explores if in the construction of this kind of ingenious formulas one could find interesting and useful combinations among issues like efficiency and creativity, or organization and ideas. This dynamic of bidirectional relations, rescued urgently at this present moment of excess of information, is based on the proposal for a more evident equivalence between the “socialization” of the work in architecture, anytime it is shared in public, and the opposite concept, the work on the proper act of “socialization” itself. As if a new awareness of the capacities of the use of media could turn it into an instrumental force, capable of contributing to the development of the practice of architecture, from an ideally committed and intelectual perspective.