Residual effect of natural and synthetic zinc chelates on zinc in a soil solution of a waterlogged acidic soil. Evolution of the pH and redox potential.

Zinc chelates have been widely used to correct deficiencies in this micronutrient in different soil types and under different moisture conditions. The aging of the metal in soil could cause a change in its availability. Over time the most labile forms of Zn could decrease in activity and extractability and change to more stable forms. Various soil parameters, such as redox conditions, time, soil type and moisture conditions, affect the aging process and modify the solubility of the metal. In general, redox conditions influence pH and also the chemical forms dissolved in the soil solution. Soil pH also affects Zn solubility; at high pH values, most of the Zn is present in forms that are not bioavailable to plants. The objective of this study was to determine the changes in Zn over time in a soil solution in a waterlogged acidic soil to which synthetic and natural chelates were applied

Residual effect of synthetic Zn chelates on the availability of this metal in different soils under waterlogged conditions.

Adding Zn improves crop growth, increases seed yield and also positively affects nutritional quality. After Zn fertilization, there is normally a period of several years in which residual effects provide an adequate supply of Zn to successive crops. Immediately after the application of Zn sources water-soluble Zn slowly but continually decreases. Various factors, including time and moisture conditions, affect the aging process and modify the solubility of the metal in soil and therefore its availability. In previous experiments, we studied the residual effect of synthetic chelates, obtained that the amounts of potentially available Zn decreased in the second cropping year due to aging processes. The present study was undertaken to verify variations in the residual effects of applying four different synthetic Zn sources

Multipath Reflectivity Estimation in Urban Environments for Synthetic Aperture Radar Images

Synthetic Aperture Radar (SAR) images a target region reflectivity function in the multi-dimensional spatial domain of range and cross-range. SAR synthesizes a large aperture radar in order to achieve a finer azimuth resolution than the one provided by any on-board real antenna. Conventional SAR techniques assume a single reflection of transmitted waveforms from targets. Nevertheless, today¿s new scenes force SAR systems to work in urban environments. Consequently, multiple-bounce returns are added to directscatter echoes. We refer to these as ghost images, since they obscure true target image and lead to poor resolution. By analyzing the quadratic phase error (QPE), this paper demonstrates that Earth¿s curvature influences the defocusing degree of multipath returns. In addition to the QPE, other parameters such as integrated sidelobe ratio (ISLR), peak sidelobe ratio (PSLR), contrast (C) and entropy (E) provide us with the tools to identify direct-scatter echoes in images containing undesired returns coming from multipath.

Mechanical segregation of apricot varieties and their ripeness levels at harvest

Some laboratory tests consisting on quasi-static compression and puncture forces carried out on twelve varieties of apricot during 1990 and 1991 were effective in sorting them. These mechanical properties show a high correlation w i th the ethylene production rate per fruit, so allowing to discriminate between ripeness levels at harvest. In this study it is also demonstrated that puncture seems to be the less variable mechanical test. The values (N/mm) obtained with it show a highly significant correlation with compression resistance and with quasi-static compression damage of the fruits.

Mechanical properties of peanut varieties

On the efforts for rationalizing the production of peanuts in Spain, one of the objectives was to obtain a well adapted variety, suitable for mechanization. We tried to get information on the characteristics that would condition the suitability of a variety to mechanized production, principally mechanical harvesting. All the characters studied would then be taken into account in a breeding program.

Relations between resistance of fruit and skin characteristics in tomato varieties.

Varietal differences in physical properties of processing tomato fruits related with resistance are determined. Mean values of skin resistance and firmness are highly correlated with rupture of the fruits by quasi-static compression and by impact. Skin resistance is dependent on the features of the epidermis, studied microscopically.

Fruit firmness and skin resistance of processing tomato varieties tested in Badajoz (Spain), related to mechanical harvesting.

Determinations of resistance to damage were carried out in a total of 31 tomato varieties for processing, with the purpose of choosing the most suitable ones for mechanical harvesting. The characteristics studied include: puncture, deformation and rupture of the fruits, the ease of detachment of the fruits also being determined. Seventeen varieties were chosen, for further tests, with values 0.76 to 1.7 2 N of resistance to puncture; 3 to 9 N/mm of resistance to compression and 2.16 to 29.40 N resistance to detachment.

Impact damage on selected varieties of apples, pears and other fruits.

During the past years, different laboratory impact response studies have been carrj.ec out in following fruits: apples (2 varieties), pears (4 varieties), Asian or Nashi pears (4 varieties), melons (2 varieties), peaches (2 varieties) and avocados. The methodology of the tests is described, as well as the results and observations obtained in each group of tests. Impact response is compared to bruising susceptibility, bruise characteristics (appearance and structural features) and varietal and ripeness differences.

Synthetic strategy of porous ZnO and CdS nanostructures doped ferroelectric liquid crystal and its optical behavior

A simple and scalable chemical approach has been proposed for the generation of 1-dimensional nanostructures of two most important inorganic materials such as zinc oxide and cadmium sulfide. By controlling the growth habit of the nanostructures with manipulated reaction conditions, the diameter and uniformity of the nanowires/nanorods were tailored. We studied extensively optical behavior and structural growth of CdS NWs and ZnO NRs doped ferroelectric liquid crystal Felix-017/100. Due to doping band gap has been changed and several blue shifts occurred in photoluminescence spectra because of nanoconfinement effect and mobility of charges.

Processing of ultra-wideband low-frequency signals, for application in Foliage Penetration (FOPEN) Synthetic Aperture Radar (SAR) systems

Foliage Penetration (FOPEN) radar systems were introduced in 1960, and have been constantly improved by several organizations since that time. The use of Synthetic Aperture Radar (SAR) approaches for this application has important advantages, due to the need for high resolution in two dimensions. The design of this type of systems, however, includes some complications that are not present in standard SAR systems. FOPEN SAR systems need to operate with a low central frequency (VHF or UHF bands) in order to be able to penetrate the foliage. High bandwidth is also required to obtain high resolution. Due to the low central frequency, large integration angles are required during SAR image formation, and therefore the Range Migration Algorithm (RMA) is used. This project thesis identifies the three main complications that arise due to these requirements. First, a high fractional bandwidth makes narrowband propagation models no longer valid. Second, the VHF and UHF bands are used by many communications systems. The transmitted signal spectrum needs to be notched to avoid interfering them. Third, those communications systems cause Radio Frequency Interference (RFI) on the received signal. The thesis carries out a thorough analysis of the three problems, their degrading effects and possible solutions to compensate them. The UWB model is applied to the SAR signal, and the degradation induced by it is derived. The result is tested through simulation of both a single pulse stretch processor and the complete RMA image formation. Both methods show that the degradation is negligible, and therefore the UWB propagation effect does not need compensation. A technique is derived to design a notched transmitted signal. Then, its effect on the SAR image formation is evaluated analytically. It is shown that the stretch processor introduces a processing gain that reduces the degrading effects of the notches. The remaining degrading effect after processing gain is assessed through simulation, and an experimental graph of degradation as a function of percentage of nulled frequencies is obtained. The RFI is characterized and its effect on the SAR processor is derived. Once again, a processing gain is found to be introduced by the receiver. As the RFI power can be much higher than that of the desired signal, an algorithm is proposed to remove the RFI from the received signal before RMA processing. This algorithm is a modification of the Chirp Least Squares Algorithm (CLSA) explained in [4], which adapts it to deramped signals. The algorithm is derived analytically and then its performance is evaluated through simulation, showing that it is effective in removing the RFI and reducing the degradation caused by both RFI and notching. Finally, conclusions are drawn as to the importance of each one of the problems in SAR system design.

Genetic characterization of chestnut (Castanea sativa Mill.) orchards and traditional nut varieties in El Bierzo, a glacial refuge and major cultivation site in Northwestern Spain

This paper presents a detailed genetic study of Castanea sativa in El Bierzo, a major nut production region with interesting features. It is located within a glacial refuge at one extreme of the distribution area (northwest Spain); it has a centenary tradition of chestnut management; and more importantly, it shows an unusual degree of genetic isolation. Seven nuclear microsatellite markers were selected to analyze the genetic variability and structure of 169 local trees grafted for nut production. We analyzed in the same manner 62 local nuts. The selected loci were highly discriminant for the genotypes studied, giving a combined probability of identity of 6.1 × 10−6. An unprecedented density of trees was sampled for this project over the entire region, and nuts were collected representing 18 cultivars marketed by local producers. Several instances of misclassification by local growers were detected. Fixation index estimates and analysis of molecular variance (AMOVA) data are supportive of an unexpectedly high level of genetic differentiation in El Bierzo, larger than that estimated in a previous study with broader geographical scope but based on limited local sampling (Pereira-Lorenzo et al., Tree Genet Genomes 6: 701–715, 2010a). Likewise, we have determined that clonality due to grafting had been previously overestimated. In line with these observations, no significant spatial structure was found using both a model-based Bayesian procedure and Mantel’s tests. Taken together, our results evidence the need for more fine-scale genetic studies if conservation strategies are to be efficiently improved.

Expresión de la resistencia en plantas de tomate a nematodos formadores de nódulos (Meloidogyne javanica)

La resistencia genética mediada por los genes R es uno de los sistemas de defensa de las plantas frente a patógenos y se activa una vez que los patógenos han superado la defensa basal que otorgan la cutícula y pared celular. Los mecanismos de resistencia genética se inician a su vez, por el reconocimiento de productos derivados de genes de avirulencia de los patógenos (avr) por parte de las proteínas R. Tanto la respuesta de defensa basal como la respuesta de defensa por genes R están influenciadas por patrones de regulación hormonal, que incluye a las principales hormonas vegetales ácido salicílico (SA), ácido jasmónico (JA) y etileno (ET). En tomate (Solanum lycopersicum) uno de los genes R es el gen MiG1, que confiere resistencia a nematodos formadores de nódulos (Meloidogyne javanica, M. incognita y M. arenaria). Uno de los eventos más importantes que caracterizan a la respuesta de resistencia es la reacción hipersensible (HR), que está mediada por la activación temprana de una serie de sistemas enzimáticos, entre los que destaca el de las peroxidasas (PRXs) Clase III. Su función es importante tanto para limitar el establecimiento y expansión del nematodo, al generar ambientes altamente tóxicos por su contribución en la producción masiva de ROS, como por su implicación en la síntesis y depósito de lignina generando barreras estructurales en el sitio de infección. Además de estos mecanismos de defensa asociados a la resistencia constitutiva, las plantas pueden desarrollar resistencia sistémica adquirida (SAR) que en la naturaleza ocurre, en ocasiones, en una fase posterior a que la planta haya sufrido el ataque de un patógeno. Así mismo hay diferentes productos de origen químico como el benzotiadiazol o BTH (ácido S-metil benzol-(1,2,3)-tiadiozole-7-carbónico ester) que pueden generar esta misma respuesta SAR. Como resultado, la planta adquiere resistencia sistémica frente a nuevos ataques de patógenos. En este contexto, el presente trabajo aborda en primer lugar el análisis comparativo, mediante microarrays de oligonucleótidos, de los transcriptomas de los sistemas radicales de plantas de tomate de 8 semanas de edad de dos variedades, una portadora del gen de resistencia MiG1 (Motelle) y otra carente del mismo y, por tanto, susceptible (Moneymaker), antes y después de la infección por M. javanica. Previo a la infección se observó que la expresión de un gran número de transcritos era más acusada en la variedad resistente que en la susceptible, entre ellos el propio gen MiG1 o los genes PrG1 (o P4), LEJA1 y ER24, lo que indica que, en ausencia de infección, las rutas hormonales del SA, JA y ET están más activas en la raíz de la variedad resistente. Por el contrario, un número mucho menor de transcritos presentaban su expresión más reducida en Motelle que en Moneymaker, destacando un gen de señalización para sintetizar la hormona giberelina (GA). La infección por M. javanica causa importantes cambios transcripcionales en todo el sistema radical que modifican sustancialmente las diferencias basales entre plantas Motelle y Moneymaker, incluida la sobreexpresión en la variedad resistente de los transcritos de MiG1, que se reduce parcialmente, mientras que las rutas hormonales del SA y el JA continuan más activas que en la susceptible (evidente por los genes PrG1 y LEJA1). Además, los cambios asociados a la infección del nematodo se evidencian por las grandes diferencias entre los dos tiempos post-infección considerados, de tal forma que en la fase temprana (2 dpi) de la interacción compatible predomina la sobreexpresión de genes de pared celular y en la tardía (12 dpi) los relacionados con el ARN. En el análisis de la interacción incompatible, aunque también hay muchas diferencias entre ambas fases, hay que destacar la expresión diferencial común de los genes loxA y mcpi (sobrexpresados) y del gen loxD (reprimido) por su implicación en defensa en otras interacciones planta-patógeno. Cabe destacar que entre las interacciones compatible e incompatible hubo muy pocos genes en común. En la etapa temprana de la interacción compatible destacó la activación de genes de pared celular y la represión de la señalización; en cambio, en la interacción incompatible hubo proteínas principalmente implicadas en defensa. A los 12 días, en la interacción compatible los genes relacionados con el ARN y la pared celular se sobreexpresaban principalmente, y se reprimían los de proteínas y transporte, mientras que en la incompatible se sobreexpresaron los relacionados con el estrés, el metabolismo secundario y el de hormonas y se reprimieron los de ARN, señalización, metabolismo de hormonas y proteínas. Por otra parte, la técnica de silenciamiento génico VIGS reveló que el gen TGA 1a está implicado en la resistencia mediada por el gen MiG1a M. javanica. Así mismo se evaluó el transcriptoma de todo el sistema radical de la variedad susceptible tras la aplicación del inductor BTH, y se comparó con el transcriptoma de la resistente. Los resultados obtenidos revelan que el tratamiento con BTH en hojas de Moneymaker ejerce notables cambios transcripcionales en la raíz; entre otros, la activación de factores de transcripción Myb (THM16 y THM 27) y del gen ACC oxidasa. Las respuestas inducidas por el BTH parecen ser de corta duración ya que no hubo transcritos diferenciales comunes a las dos fases temporales de la infección comparadas (2 y 12 dpi). El transcriptoma de Moneymaker tratada con BTH resultó ser muy diferente al de la variedad resistente Motelle, ambas sin infectar, destacando la mayor expresión en el primero del gen LeEXP2, una expansina relacionada con defensa frente a nematodos. Las respuestas inducidas por los nematodos en Moneymaker-BTH también fueron muy distintas a las observadas previamente en la interacción incompatible mediada por MiG1, pues sólo se detectaron 2 genes sobreexpresados comunes a ambos eventos. Finalmente, se abordó el estudio de la expresión diferencial de genes que codifican PRXs y su relación con la resistencia en la interacción tomate/M. javanica. Para ello, se realizó en primer lugar el estudio del análisis del transcriptoma de tomate de la interacción compatible, obtenido en un estudio previo a partir de tejido radical infectado en distintos tiempos de infección. Se han identificado 16 unigenes de PRXs con expresión diferencial de los cuales 15 se relacionan por primera vez con la respuesta a la infección de nematodos. La mayoría de los genes de PRXs identificados, 11, aparecen fuertemente reprimidos en el sitio de alimentación, en las células gigantes (CG). Dada la implicación directa de las PRXs en la activación del mecanismo de producción de ROS, la supresión de la expresión génica local de genes de PRXs en el sitio de establecimiento y alimentación pone de manifiesto la capacidad del nematodo para modular y superar la respuesta de defensa de la planta de tomate en la interacción compatible. Posteriormente, de estos genes identificados se han elegido 4: SGN-U143455, SGN-U143841 y SGN-U144042 reprimidos en el sitio de infección y SGN-U144671 inducido, cuyos cambios de expresión se han determinado mediante análisis por qRT-PCR y de hibridación in situ en dos tiempos de infección (2 dpi y 4 dpi) y en distintos tejidos radicales de tomate resistente y susceptible. Los patrones de expresión obtenidos demuestran que en la interacción incompatible la transcripción global de los 4 genes estudiados se dispara en la etapa más temprana en el sitio de infección, detectándose la localización in situ de transcritos en el citoplasma de las células corticales de la zona meristemática afectadas por el nematodo. A 4 dpi se observó que los niveles de expresión en el sitio de infección cambian de tendencia y los genes SGN-U144671 y SGN-U144042 se reprimen significativamente. Los diferentes perfiles de expresión de los genes PRXs en los dos tiempos de infección sugieren que su inducción en las primeras 48 horas es crucial para la respuesta de defensa relacionada con la resistencia frente a la invasión del nematodo. Por último, al analizar el tejido radical sistémico, se detectó una inducción significativa de la expresión en la fase más tardía de la infección del gen SGN-U144042 en el genotipo susceptible y del SGN-U143841 en ambos genotipos. En este estudio se describe por primera vez la inducción de la expresión sistémica de genes de PRXs en tomate durante la interacción compatible e incompatible con M. javanica lo que sugiere su posible implicación funcional en la respuesta de defensa SAR activada por la infección previa del nematodo. ABSTRACT Plants defend themselves from pathogens by constitutive and/or induced defenses. A common type of induced defense involves plant resistance genes (R), which are normally activated in response to attack by specific pathogen species. Typically, a specific plant R protein recognizes a specific pathogen avirulence (avr) compound. This initiates a complex biochemical cascade inside the plant that results in synthesis of antipathogen compounds. This response can involve chemical signaling, transcription, translation, enzymes and metabolism, and numerous plant hormones such as salicylic acid (SA), jasmonates (JA) and ethylene (ET). Induced plant defense can also activate Class III peroxidases (PRXs), which produce reactive oxygen species (ROS), regulate extracellular H2O2, and play additional roles in plant defense. R-gene activation and the resulting induced defense often remain localized in the specific tissues invaded by the plant pathogen. In other cases, the plant responds by signaling the entire plant to produce defense compounds (systemic induction). Plant defense can also be induced by the exogenous application of natural or synthetic elicitors, such as benzol-(1,2,3)-thiadiazole-7-carbothionic acid. There is much current scientific interest in R-genes and elicitors, because they might be manipulated to increase agricultural yield. Scientists also are interested in systemic induction, because this allows the entire plant to be defended. In this context, one of the aims of this investigation was the transcriptoma analysis of the root systems of two varieties of tomato, the resistant variety (Motelle) that carrier MiG1 and the susceptible (Moneymaker) without MiG1, before and after infection with M. javanica. The overexpression was more pronounced in the transcriptoma of the resistant variety compared with susceptible, before infection, including the MiG1 gene, PrG1 (or P4) genes, LEJA1 and ER24, indicating that hormone SA, JA and ET are active in the resistant variety. Moreover, GA hormone presents an opposite behavior. M. javanica infection causes significant transcriptional changes in both compatible (Moneymaker-M. javanica) and incompatible (Motelle-M. javanica) interaction. In the incompatible transcriptome root system, was notably reduced the expression of the MiG1 gene, and a continuity in the expression of the hormonal pathways of SA and JA. In other hand, transcriptional profile changes during compatible interaction were associated with nematode infection. The large differences between the two times point infection considered (2 dpi and 12 dpi) indicates an overexpression of cell wall related genes in the first phase, and conversely an overexpression of RNA genes in the late phase. Transcriptoma analysis of incompatible interaction, although there were differences between the two phases, should be highlighted the common differential gene expression: loxA and mcpi (overexpressed) and loxD gene (suppressed), as they are involved in defenses in other plant-pathogen interactions. The VIGS tool has provided evidence that TGA 1a is involved in MiG1 mediated resistance to M. javanica. Likewise, the systemic application of BTH was assessed and compared with susceptible and resistant variety. Root system transcriptoma of BTH treatment on leaves showed the activation of Myb transcription factors (THM16 and THM27), the ACC oxidase gene. and the LeEXP2 gene, encoding for an expansin enzyme, related with defense against nematodes. The activation appears to be reduced by subsequent infection and establishment of nematodes. To assist in elucidate the role of tomato PRXs in plant defence against M. javanica, the transcriptome obtained previously from isolated giant cells (GC) and galls at 3 and 7 dpi from the compatible interaction was analysed. A total of 18 different probes corresponding to 16 PRX encoding genes were differentially expressed in infection site compared to the control uninfected root tissues. Most part of them (11) was down-regulated. These results yielded a first insight on 15 of the PRX genes responding to tomato–Meloidogyne interaction and confirm that repression of PRX genes might be crucial for feeding site formation at the initial stages of infection. To study the involvement of PRX genes in resistance response, four genes have been selected: SGN-U143455, SGN-U143841 and SGN-U144042 consistently down-regulated and SGN-U144671 consistently up-regulated at infection site in compatible interaction. The expression changes were determined by qRT-PCR and in situ location at 2 dpi and 4 dpi, and in different root tissues of resistant and susceptible plants. Early upon infection (2 dpi), the transcripts levels of the four genes were strongly increased in infected tissue of resistant genotype. In situ hybridization showed transcript accumulation of them in meristem cortical cells, where the nematode made injury. The results obtained provide strong evidence that early induction of PRX genes is important for defence response of the resistance against nematode invasion. Moreover, the induction patterns of SGN-U144042 gene observed at 4 dpi in distal noninfected root tissue into the susceptible genotype and of SGN-U143841 gene in both genotypes suggest a potential involvement of PRX in the systemic defence response.

Numerical Simulation of the Aerodynamic Behavior of High Velocity Trains under Synthetic Crosswinds of Different Shear and Turbulence Characteristics

A numerical simulation of the aerodynamic behavior of high-speed trains under synthetic crosswinds at a 90º yaw angle is presented. The train geometry is the aerodynamic train model (ATM). Flow description based on numerical simulations is obtained using large eddy simulation (LES) and the commercial code ANSYSFluent V14.5. A crosswind whose averaged velocity and turbulence characteristics change with distance to the ground is imposed. Turbulent fluctuations that vary temporally and spatially are simulated with TurbSim code. The crosswind boundary condition is calculated for the distance the train runs during a simulation period. The inlet streamwise velocity boundary condition is generated using Taylor?s frozen turbulence hypothesis. The model gives a time history of the force and moments acting on the train; this includes averaged values, standard deviations and extreme values. Of particular interest are the spectra of the forces and moments, and the admittance spectra. For comparison, results obtained with LES and a uniform wind velocity fluctuating in time, and results obtained with Reynolds averaged Navier Stokes equations (RANS), and the averaged wind conditions, are also presented.

Numerical simulation of a synthetic jet with OpenFoam

Numerical simulations of flow surrounding a synthetic jet actuating device are presented. By modifying a dynamic mesh technique available in OpenFoam-a well-documented open-source solver for fluid dynamics, detailed computations of the sinusoidal motion of the synthetic jet diaphragm were possible. Numerical solutions were obtained by solving the two dimensional incompressible viscous N-S equations, with the use of a second order implicit time marching scheme and a central finite volume method for spatial discretization in both streamwise and crossflow directions. A systematic parametric study is reported here, in which the external Reynolds number, the diaphragm amplitude and frequency, and the slot dimensions are varied.

Pulmonary Artery-Vein Segmentation in Real and Synthetic CT Images = Segmentación Arteria-Vena Pulmonares en Imágenes de CT Reales y Sintéticas

La tomografía axial computerizada (TAC) es la modalidad de imagen médica preferente para el estudio de enfermedades pulmonares y el análisis de su vasculatura. La segmentación general de vasos en pulmón ha sido abordada en profundidad a lo largo de los últimos años por la comunidad científica que trabaja en el campo de procesamiento de imagen; sin embargo, la diferenciación entre irrigaciones arterial y venosa es aún un problema abierto. De hecho, la separación automática de arterias y venas está considerado como uno de los grandes retos futuros del procesamiento de imágenes biomédicas. La segmentación arteria-vena (AV) permitiría el estudio de ambas irrigaciones por separado, lo cual tendría importantes consecuencias en diferentes escenarios médicos y múltiples enfermedades pulmonares o estados patológicos. Características como la densidad, geometría, topología y tamaño de los vasos sanguíneos podrían ser analizados en enfermedades que conllevan remodelación de la vasculatura pulmonar, haciendo incluso posible el descubrimiento de nuevos biomarcadores específicos que aún hoy en dípermanecen ocultos. Esta diferenciación entre arterias y venas también podría ayudar a la mejora y el desarrollo de métodos de procesamiento de las distintas estructuras pulmonares. Sin embargo, el estudio del efecto de las enfermedades en los árboles arterial y venoso ha sido inviable hasta ahora a pesar de su indudable utilidad. La extrema complejidad de los árboles vasculares del pulmón hace inabordable una separación manual de ambas estructuras en un tiempo realista, fomentando aún más la necesidad de diseñar herramientas automáticas o semiautomáticas para tal objetivo. Pero la ausencia de casos correctamente segmentados y etiquetados conlleva múltiples limitaciones en el desarrollo de sistemas de separación AV, en los cuales son necesarias imágenes de referencia tanto para entrenar como para validar los algoritmos. Por ello, el diseño de imágenes sintéticas de TAC pulmonar podría superar estas dificultades ofreciendo la posibilidad de acceso a una base de datos de casos pseudoreales bajo un entorno restringido y controlado donde cada parte de la imagen (incluyendo arterias y venas) está unívocamente diferenciada. En esta Tesis Doctoral abordamos ambos problemas, los cuales están fuertemente interrelacionados. Primero se describe el diseño de una estrategia para generar, automáticamente, fantomas computacionales de TAC de pulmón en humanos. Partiendo de conocimientos a priori, tanto biológicos como de características de imagen de CT, acerca de la topología y relación entre las distintas estructuras pulmonares, el sistema desarrollado es capaz de generar vías aéreas, arterias y venas pulmonares sintéticas usando métodos de crecimiento iterativo, que posteriormente se unen para formar un pulmón simulado con características realistas. Estos casos sintéticos, junto a imágenes reales de TAC sin contraste, han sido usados en el desarrollo de un método completamente automático de segmentación/separación AV. La estrategia comprende una primera extracción genérica de vasos pulmonares usando partículas espacio-escala, y una posterior clasificación AV de tales partículas mediante el uso de Graph-Cuts (GC) basados en la similitud con arteria o vena (obtenida con algoritmos de aprendizaje automático) y la inclusión de información de conectividad entre partículas. La validación de los fantomas pulmonares se ha llevado a cabo mediante inspección visual y medidas cuantitativas relacionadas con las distribuciones de intensidad, dispersión de estructuras y relación entre arterias y vías aéreas, los cuales muestran una buena correspondencia entre los pulmones reales y los generados sintéticamente. La evaluación del algoritmo de segmentación AV está basada en distintas estrategias de comprobación de la exactitud en la clasificación de vasos, las cuales revelan una adecuada diferenciación entre arterias y venas tanto en los casos reales como en los sintéticos, abriendo así un amplio abanico de posibilidades en el estudio clínico de enfermedades cardiopulmonares y en el desarrollo de metodologías y nuevos algoritmos para el análisis de imágenes pulmonares. ABSTRACT Computed tomography (CT) is the reference image modality for the study of lung diseases and pulmonary vasculature. Lung vessel segmentation has been widely explored by the biomedical image processing community, however, differentiation of arterial from venous irrigations is still an open problem. Indeed, automatic separation of arterial and venous trees has been considered during last years as one of the main future challenges in the field. Artery-Vein (AV) segmentation would be useful in different medical scenarios and multiple pulmonary diseases or pathological states, allowing the study of arterial and venous irrigations separately. Features such as density, geometry, topology and size of vessels could be analyzed in diseases that imply vasculature remodeling, making even possible the discovery of new specific biomarkers that remain hidden nowadays. Differentiation between arteries and veins could also enhance or improve methods processing pulmonary structures. Nevertheless, AV segmentation has been unfeasible until now in clinical routine despite its objective usefulness. The huge complexity of pulmonary vascular trees makes a manual segmentation of both structures unfeasible in realistic time, encouraging the design of automatic or semiautomatic tools to perform the task. However, this lack of proper labeled cases seriously limits in the development of AV segmentation systems, where reference standards are necessary in both algorithm training and validation stages. For that reason, the design of synthetic CT images of the lung could overcome these difficulties by providing a database of pseudorealistic cases in a constrained and controlled scenario where each part of the image (including arteries and veins) is differentiated unequivocally. In this Ph.D. Thesis we address both interrelated problems. First, the design of a complete framework to automatically generate computational CT phantoms of the human lung is described. Starting from biological and imagebased knowledge about the topology and relationships between structures, the system is able to generate synthetic pulmonary arteries, veins, and airways using iterative growth methods that can be merged into a final simulated lung with realistic features. These synthetic cases, together with labeled real CT datasets, have been used as reference for the development of a fully automatic pulmonary AV segmentation/separation method. The approach comprises a vessel extraction stage using scale-space particles and their posterior artery-vein classification using Graph-Cuts (GC) based on arterial/venous similarity scores obtained with a Machine Learning (ML) pre-classification step and particle connectivity information. Validation of pulmonary phantoms from visual examination and quantitative measurements of intensity distributions, dispersion of structures and relationships between pulmonary air and blood flow systems, show good correspondence between real and synthetic lungs. The evaluation of the Artery-Vein (AV) segmentation algorithm, based on different strategies to assess the accuracy of vessel particles classification, reveal accurate differentiation between arteries and vein in both real and synthetic cases that open a huge range of possibilities in the clinical study of cardiopulmonary diseases and the development of methodological approaches for the analysis of pulmonary images.