Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market

Artificial cognitive control system based on the shared circuits model of sociocognitive capacities. A first approach

sharedcircuitmodels is presented in this work. The sharedcircuitsmodelapproach of sociocognitivecapacities recently proposed by Hurley in The sharedcircuitsmodel (SCM): how control, mirroring, and simulation can enable imitation, deliberation, and mindreading. Behavioral and Brain Sciences 31(1) (2008) 1–22 is enriched and improved in this work. A five-layer computational architecture for designing artificialcognitivecontrolsystems is proposed on the basis of a modified sharedcircuitsmodel for emulating sociocognitive experiences such as imitation, deliberation, and mindreading. In order to show the enormous potential of this approach, a simplified implementation is applied to a case study. An artificialcognitivecontrolsystem is applied for controlling force in a manufacturing process that demonstrates the suitability of the suggested approach

Managing software development information in global configuration management activities

Software Configuration Management (SCM) techniques have been considered the entry point to rigorous software engineering, where multiple organizations cooperate in a decentralized mode to save resources, ensure the quality of the diversity of software products, and manage corporate information to get a better return of investment. The incessant trend of Global Software Development (GSD) and the complexity of implementing a correct SCM solution grow not only because of the changing circumstances, but also because of the interactions and the forces related to GSD activities. This paper addresses the role SCM plays in the development of commercial products and systems, and introduces a SCM reference model to describe the relationships between the different technical, organizational, and product concerns any software development company should support in the global market.

Evaluating alternative industrial network organizations and information systems

Purpose – The purpose of this paper is to present a simulation‐based evaluation method for the comparison of different organizational forms and software support levels in the field of supply chain management (SCM). Design/methodology/approach – Apart from widely known logistic performance indicators, the discrete event simulation model considers explicitly coordination cost as stemming from iterative administration procedures. Findings - The method is applied to an exemplary supply chain configuration considering various parameter settings. Curiously, additional coordination cost does not always result in improved logistic performance. Influence factor variations lead to different organizational recommendations. The results confirm the high importance of (up to now) disregarded dimensions when evaluating SCM concepts and IT tools. Research limitations/implications – The model is based on simplified product and network structures. Future research shall include more complex, real world configurations. Practical implications – The developed method is designed for the identification of improvement potential when SCM software is employed. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and the method provides a comprehensive tool for strategic IT decision making. Originality/value – Reviewed literature is mostly focused on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but associated coordination cost has not been addressed by researchers.

Influencia de la castración y la línea genética paterna sobre el rendimiento productivo y la calidad de la canal y de la carne en cerdos sacrificados a pesos elevados

El objetivo general de esta Tesis Doctoral fue estudiar la influencia del sexo, el método de castración de los machos y la línea genética paterna sobre la productividad y la calidad de la canal y de la carne en cerdos blancos sacrificados a pesos elevados con destino a la industria de los productos curados de calidad. En el experimento 1, se utilizaron 360 cerdos sacrificados a 125 kg de peso vivo (PV) para estudiar la influencia del sexo y la castración [machos inmunocastrados (MI), machos castrados quirúrgicamente (MC) y hembras enteras (HE)] de dos líneas genéticas paternas Large White (Top York y Tempo) sobre los rendimientos productivos y la calidad de la canal y de la carne. La línea materna utilizada fue Large White × Landrace en todos los casos. Los MI se inmunizaron contra el factor de liberación de gonadotropina (GnRF) mediante la utilización de Improvac a los 78 (16 d en prueba) y 126 (64 d en prueba y 48 d antes del sacrificio) d de edad. Cada uno de los 6 tratamientos experimentales fue replicado 6 veces (cuadra con 10 cerdos). Desde el inicio de la prueba hasta el día de la primera inyección con Improvac (62 a 78 d de edad) los MI y las HE crecieron menos (P < 0,001) que los MC sin que se observaran diferencias en el consumo medio diario de pienso (CMD). Los MC tuvieron peor eficiencia alimenticia que las HE con los MI mostrando valores intermedios (P < 0,01). Entre las dos inyecciones de Improvac (78 a 126 d de edad), los MI crecieron y comieron menos que los MC, mostrando las HE valores intermedios (P < 0,001). Los MI fueron más eficientes que las HE y ambos más eficientes que los MC (P < 0,001). Sin embargo, desde la segunda inyección de Improvac hasta el sacrificio (126 a 174 d de edad) los MI crecieron más y fueron más eficientes (P < 0,001) que las HE y los MC. Al final de la prueba, MI y MC crecieron más (P < 0,01) que HE. Asimismo, los MI fueron más eficientes (P < 0,001) pero presentaron menor rendimiento de canal (P < 0,001) que los MC y las HE. Por otro lado, los MI y las HE depositaron menos grasa dorsal que los MC (P < 0,001). Las hembras tuvieron mayor rendimiento de lomo y menos grasa intramuscular que MI y MC (P < 0,01). Asimismo, las HE tuvieron mayor rendimiento de jamón en fresco y perfilado que los MC con los MI mostrando valores intermedios (P < 0,05). Los cerdos híbridos procedentes de machos Tempo crecieron más (P < 0,001) que los procedentes de machos Top York, sin que se encontraran diferencias para el CMD o para la eficiencia alimenticia. Los híbridos de los cruces con Top York tuvieron mejores rendimientos de jamones frescos y perfilados (P < 0,05) pero menor rendimiento de lomo y menos grasa intramuscular que los cruces con Tempo (P < 0,01). En conclusión, los MI presentaron mejor eficiencia alimenticia, pero menor rendimiento de canal que los MC y las HE. El contenido en grasa intramuscular fue similar entre MC y MI y superior para ambos que para las HE. Los cruces procedentes de la línea paterna Tempo crecieron más y tuvieron mayor contenido en grasa intramuscular, pero un rendimiento en jamón perfilado ligeramente inferior al de los cruces procedentes de la línea paterna Top York. Se concluye que la inmunocastración de los machos es una alternativa viable a la castración quirúrgica para la producción de cerdos pesados destinados a la industria de los productos curados. Debido a su mayor potencial de crecimiento y mayor contenido en grasa intramuscular, los híbridos procedentes de la línea paterna Tempo presentan ventajas frente a los híbridos procedentes de la línea paterna Top York cuando se destinan a la industria de productos curados de calidad. En el experimento 2, se utilizaron 240 cerdos para comparar los rendimientos productivos y los parámetros de calidad de la canal de MI, MC y HE destinados a la industria de productos cárnicos curados procedentes del cruce de la línea materna Large White × Landrace con la línea genética paterna Duroc o Pietrain. Entre las 2 inyecciones de Improvac (87 a 137 d de edad), los MI y las HE crecieron menos que los MC (P < 0,01). Asimismo, los MI comieron menos pienso que las HE y ambos menos que los MC (2,33, 2,55 y 2,77 kg/d; respectivamente; P < 0,001). Como resultado, los MI fueron más eficientes que los MC y las HE (P < 0,001). Desde la segunda inyección de Improvac hasta el momento del sacrificio (137 a 164 d de edad), los MI fueron más eficientes que las HE y ambos más que los MC (0,346, 0,323 y 0,300, respectivamente; P < 0,001). Las diferencias observadas en este periodo entre los sexos en cuanto a rendimientos productivos fueron más pronunciadas en los cerdos procedentes de la línea paterna Pietrain que los de la línea Duroc (P < 0,05 para la interacción). En el global de la prueba (87 a 164 d de edad) el sexo no afectó al crecimiento en los cerdos procedentes de la línea paterna Duroc pero en los cerdos procedentes de la línea paterna Pietrain, los MI y los MC crecieron más que las HE (P < 0,05 para la interacción). Asimismo, los MI tuvieron mejor eficiencia alimenticia (0,406, 0,364 y 0,380, P < 0,001) y menor rendimiento de la canal (76,6, 78,1 y 78,8%; P < 0,001) que los MC y las HE. Las canales de las HE fueron más magras que las canales de los MC, con las canales de los MI mostrando valores intermedios (P < 0,01). El rendimiento en jamones y lomos fue mayor para las HE que para los MI y los MC (P < 0,001). El contenido en grasa intramuscular fue menor en las HE que en los MC, con los MI mostrando valores intermedios (3,5 vs. 3,9 y 3,7%; P < 0,05). Por otra parte, los híbridos procedentes de machos Duroc crecieron más rápido (1,167 vs. 0,986 kg/d; P < 0,001), consumieron más pienso (3,07 vs. 2,56 kg/d; P < 0,001) y tuvieron más grasa intramuscular (P < 0,001), pero menor rendimiento en jamones y lomos (P < 0,01) que los híbridos procedentes de machos Pietrain. Se concluye que los MI presentaron mejores productividades pero menores rendimientos de canal que MC y HE. El contenido en grasa intramuscular en el músculo longissimus dorsi fue menor para las HE que para los MC con valores intermedios para los MI. Los cruces procedentes de la genética paterna Duroc crecieron más y tuvieron más grasa intramuscular pero menos rendimiento de jamón que los cerdos procedentes de machos Pietrain. Por tanto, los MI deben ser preferidos a los MC y los cruces con la línea paterna Duroc deben ser preferidos a los cruces con Pietrain para producir canales cuando sus partes nobles están destinadas a la industria de productos cárnicos curados. En base a estos resultados, se concluye que la inmunocastración es una alternativa factible a la castración quirúrgica y que líneas genéticas paternas Tempo y Duroc son mejores para la producción de cerdo blanco pesado que las líneas Top York y Pietrain. Las interacciones entre el sexo y las líneas genéticas paternas estudiadas, sugieren que el resultado final depende en parte de la línea genética paterna utilizada. En cualquier caso, la inmunocastración es una alternativa factible a la castración quirúrgica para la producción de canales destinadas a la industria de los productos cárnicos curados. ABSTRACT The general aim of this PhD Thesis was to study the influence of sex, method of castration, and genetic background of the sire line on growth performance and carcass and meat quality merits of heavy white pigs destined to the dry-cured industry. In experiment 1, 360 pigs slaughtered at 125 kg of body weight were used to study the influence of sex and castration methodology [immunocastrated males (ICM), surgically castrated males (SCM), and intact females (IF)] of 2 terminal Large White sire lines (Top York and Tempo) on growth performance and carcass and meat quality. The female line was Large White × Landrace in all cases. The ICM pigs were immunized against gonadotropin-releasing factor with Improvac at 78 (16 d on trial) and 126 (64 d on trial and 48 d before slaughter) d of age. Each of the 6 treatments was replicated 6 times (10 pigs/pen). From the start of the experiment to the day of the first Improvac injection (62 to 78 d of age), ICM and IF grew slowlier (P < 0.001) than SCM but no differences in feed intake were detected. The SCM pigs had greater gain to feed ratio (G:F) than the IF with the ICM pigs being intermediate (P < 0.01). Between the 2 Improvac injections (78 to 126 d of age), the ICM pigs ate less feed (P < 0.001) and grew slowlier rate than the SCM pigs, with the growth of IF being intermediate. The ICM pigs were more efficient than the IF, and both were more efficient than the SCM pigs (P < 0.001). However, from the second Improvac injection to slaughter (126 to 174 d of age), the ICM pigs grew at a faster rate (P < 0.001) and were more efficient (P < 0.001) than the IF and the SCM pigs. Cumulatively, ICM and SCM pigs grew faster (P < 0.01) than IF and the ICM pigs were more efficient than the other two sexes (P < 0.001). However, the ICM pigs had reduced (P < 0.001) carcass yield compared with SCM and IF. The ICM and IF pigs also had less (P < 0.001) backfat depth than the SCM pigs. Intact females had higher (P < 0.01) loin yield but less intramuscular fat (P < 0.01) than ICM and SCM pigs and higher (P < 0.05) fresh and trimmed ham yields than SCM pigs, with ICM pigs being intermediate. Crossbreds from the Tempo sires grew faster (P < 0.001) than crossbreds from the Top York sires but no differences (P > 0.10) were detected for feed intake or feed efficiency. Crossbreds from the Top York sires had higher (P < 0.05) fresh and trimmed ham yields but less (P < 0.01) loin yield and intramuscular fat content than crossbreds from the Tempo sires. In conclusion, ICM pigs are more efficient, but have less carcass yield than SCM and IF pigs. The intramuscular fat content was lowest for the IF and similar for ICM and SCM pigs. Crossbreds from Tempo sires were heavier and had greater intramuscular fat content, but had less trimmed ham yield as compared with crossbreds from the Top York sires. Immunocastrated pigs can replace SCM pigs for the production of heavy pigs destined for the dry-cured industry. Because of increased carcass weight and the higher intramuscular content, crossbreds from Tempo sires may have an advantage over crossbreds from Top York sires for the dry-cured industry. In experiment 2, a total of 240 pigs were used to compare growth performance and carcass quality traits of immunocastrated males, surgically castrated males, and intact females of crossbreds from Large White × Landrace females and Duroc or Pietrain sires destined to the dry-cured industry. Between the 2 Improvac injections (87 and 137 d of age), ICM and IF pigs had lower average daily gain (ADG) than SCM pigs (P < 0.01). Also, ICM pigs ate less feed than IF and both type of pigs ate less than SCM pigs (2.33, 2.55, and 2.77 kg/d; P < 0.001). Consequently, ICM pigs had better G:F than SCM and IF (P < 0.001). From the second Improvac injection to slaughter (137 to 164 d of age), ICM pigs were more efficient than IF and both were more efficient than SCM pigs (0.346, 0.323, and 0.300 g/g; P < 0.001). The differences in growth performance among genders observed in this period were more pronounced for the Pietrain than for the Duroc crossbreds (P < 0.05 for the interaction). For the entire experimental period (87 to 164 d of age), gender did not affect ADG for Duroc crossbreds but for Pietrain crossbreds ICM and SCM had higher ADG than IF (P < 0.05 for the interaction). The ICM pigs had better feed efficiency (0.406, 0.364, and 0.380; g/g; P < 0.001) and lower carcass yield (76.6, 78.1, and 78.8%; P < 0.001) than SCM or IF. Carcasses from IF were leaner than carcasses from SCM with carcasses from ICM being intermediate (P < 0.01). Ham and loin (P < 0.001) yields were higher for IF than for ICM or SCM pigs. Intramuscular fat content was lower for IF than for SCM pigs with that of ICM pigs being intermediate (3.5 vs. 3.9 and 3.7%; P < 0.05). Cumulatively, crossbreds from Duroc sires had higher ADG (1.167 vs. 0.986 kg/d; P < 0.001) and average daily feed intake (3.07 vs. 2.56 kg/d; P < 0.001) and more intramuscular fat (P < 0.001) but less ham and loin yields (P < 0.01) than crossbreds from Pietrain sires. It is concluded that growth performance was better, but carcass yield lower, for ICM pigs than for SCM and IF. Intramuscular fat content in longissimus dorsi muscle was lower for IF than for SCM pigs with ICM pigs being intermediate. Crossbreds from Duroc sires grew faster and had more intramuscular fat but less ham yield than crossbreds from Pietrain sires. Therefore, ICM pigs should be preferred to SCM pigs, and Duroc crossbreds should be preferred to Pietrain crossbreds to produce carcasses destined to the production of primal cuts for the dry-cured industry. We conclude that immunocastration might be a sound alternative to surgical castration in pigs and that Tempo and Duroc might be better for the production of heavy pigs than Top York and Pietrain. The interactions reported between sex and genetic sire line, suggested that the benefits of immunocastration as an alternative to surgical castration might depend at least part on the sire line used. In any case, immunocastration is a good alternative to surgical castration for the production of carcasses destined to the dry-cured industry.

Gestión de configuración y línea de productos para mejorar el proceso experimental en ingeniería del software

La Ingeniería del Software (IS) Empírica adopta el método científico a la IS para facilitar la generación de conocimiento. Una de las técnicas empleadas, es la realización de experimentos. Para que el conocimiento obtenido experimentalmente adquiera el nivel de madurez necesario para su posterior uso, es necesario que los experimentos sean replicados. La existencia de múltiples replicaciones de un mismo experimento conlleva la existencia de numerosas versiones de los distintos productos generados durante la realización de cada replicación. Actualmente existe un gran descontrol sobre estos productos, ya que la administración se realiza de manera informal. Esto causa problemas a la hora de planificar nuevas replicaciones, o intentar obtener información sobre las replicaciones ya realizadas. Para conocer con detalle la dimensión del problema a resolver, se estudia el estado actual de la gestión de materiales experimentales y su uso en replicaciones, así como de las herramientas de gestión de materiales experimentales. El estudio concluye que ninguno de los enfoques estudiados proporciona una solución al problema planteado. Este trabajo persigue como objetivo mejorar la administración de los materiales experimentales y replicaciones de experimentos en IS para dar soporte a la replicación de experimentos. Para satisfacer este objetivo, se propone la adopción en experimentación de los paradigmas de Gestión de Configuración del Software (GCS) y Línea de Producto Software (LPS). Para desarrollar la propuesta se decide utilizar el método de investigación acción (en inglés action research). Para adoptar la GCS a experimentación, se comienza realizando un estudio del proceso experimental como transformación de productos; a continuación, se realiza una adopción de conceptos fundamentada en los procesos del desarrollo software y de experimentación; finalmente, se desarrollan un conjunto de instrumentos, que se incorporan a un Plan de Gestión de Configuración de Experimentos (PGCE). Para adoptar la LPS a experimentación, se comienza realizando un estudio de los conceptos, actividades y fases que fundamentan la LPS; a continuación, se realiza una adopción de los conceptos; finalmente, se desarrollan o adoptan las técnicas, simbología y modelos para dar soporte a las fases de la Línea de Producto para Experimentación (LPE). La propuesta se valida mediante la evaluación de su: viabilidad, flexibilidad, usabilidad y satisfacción. La viabilidad y flexibilidad se evalúan mediante la instanciación del PGCE y de la LPE en experimentos concretos en IS. La usabilidad se evalúa mediante el uso de la propuesta para la generación de las instancias del PGCE y de LPE. La satisfacción evalúa la información sobre el experimento que contiene el PGCE y la LPE. Los resultados de la validación de la propuesta muestran mejores resultados en los aspectos de usabilidad y satisfacción a los experimentadores. ABSTRACT Empirical software engineering adapts the scientific method to software engineering (SE) in order to facilitate knowledge generation. Experimentation is one of the techniques used. For the knowledge generated experimentally to acquire the level of maturity necessary for later use, the experiments have to be replicated. As the same experiment is replicated more than once, there are numerous versions of all the products generated during a replication. These products are generally administered informally without control. This is troublesome when it comes to planning new replications or trying to gather information on replications conducted in the past. In order to grasp the size of the problem to be solved, this research examines the current state of the art of the management and use of experimental materials in replications, as well as the tools managing experimental materials. The study concludes that none of the analysed approaches provides a solution to the stated problem. The aim of this research is to improve the administration of SE experimental materials and experimental replications in support of experiment replication. To do this, we propose the adaptation of software configuration management (SCM) and software product line (SPL) paradigms to experimentation. The action research method was selected in order to develop this proposal. The first step in the adaptation of the SCM to experimentation was to analyse the experimental process from the viewpoint of the transformation of products. The concepts were then adapted based on software development and experimentation processes. Finally, a set of instruments were developed and added to an experiment configuration management plan (ECMP). The first step in the adaptation of the SPL to experimentation is to analyse the concepts, activities and phases underlying the SPL. The concepts are then adapted. Finally, techniques, symbols and models are developed or adapted in support of the experimentation product line (EPL) phases. The proposal is validated by evaluating its feasibility, flexibility, usability and satisfaction. Feasibility and flexibility are evaluated by instantiating the ECMP and the EPL in specific SE experiments. Usability is evaluated by using the proposal to generate the instances of the ECMP and EPL. The results of the validation of the proposal show that the proposal performs better with respect to usability issues and experimenter satisfaction.

Personalisation of intelligent homecare services adapted to children with motor impairments

Ambient Intelligence could support innovative application domains like motor impairments' detection at the home environment. This research aims to prevent neurodevelopmental disorders through the natural interaction of the children with embedded intelligence daily life objects, like home furniture and toys. Designed system uses an interoperable platform to provide two intelligent interrelated home healthcare services: monitoring of children¿s abilities and completion of early stimulation activities. A set of sensors, which are embedded within the rooms, toys and furniture, allows private data gathering about the child's interaction with the environment. This information feeds a reasoning subsystem, which encloses an ontology of neurodevelopment items, and adapts the service to the age and acquisition of expected abilities. Next, the platform proposes customized stimulation services by taking advantage of the existing facilities at the child's environment. The result integrates Embedded Sensor Systems for Health at Mälardalen University with UPM Smart Home, for adapted services delivery.

Evaluation of configurations of supply networks supported by it systems

Los sistemas transaccionales tales como los programas informáticos para la planificación de recursos empresariales (ERP software) se han implementado ampliamente mientras que los sistemas analíticos para la gestión de la cadena de suministro (SCM software) no han tenido el éxito deseado por la industria de tecnología de información (TI). Aunque se documentan beneficios importantes derivados de las implantaciones de SCM software, las empresas industriales son reacias a invertir en este tipo de sistemas. Por una parte esto es debido a la falta de métodos que son capaces de detectar los beneficios por emplear esos sistemas, y por otra parte porque el coste asociado no está identificado, detallado y cuantificado suficientemente. Los esquemas de coordinación basados únicamente en sistemas ERP son alternativas válidas en la práctica industrial siempre que la relación coste-beneficio esta favorable. Por lo tanto, la evaluación de formas organizativas teniendo en cuenta explícitamente el coste debido a procesos administrativos, en particular por ciclos iterativos, es de gran interés para la toma de decisiones en el ámbito de inversiones en TI. Con el fin de cerrar la brecha, el propósito de esta investigación es proporcionar métodos de evaluación que permitan la comparación de diferentes formas de organización y niveles de soporte por sistemas informáticos. La tesis proporciona una amplia introducción, analizando los retos a los que se enfrenta la industria. Concluye con las necesidades de la industria de SCM software: unas herramientas que facilitan la evaluación integral de diferentes propuestas de organización. A continuación, la terminología clave se detalla centrándose en la teoría de la organización, las peculiaridades de inversión en TI y la tipología de software de gestión de la cadena de suministro. La revisión de la literatura clasifica las contribuciones recientes sobre la gestión de la cadena de suministro, tratando ambos conceptos, el diseño de la organización y su soporte por las TI. La clasificación incluye criterios relacionados con la metodología de la investigación y su contenido. Los estudios empíricos en el ámbito de la administración de empresas se centran en tipologías de redes industriales. Nuevos algoritmos de planificación y esquemas de coordinación innovadoras se desarrollan principalmente en el campo de la investigación de operaciones con el fin de proponer nuevas funciones de software. Artículos procedentes del área de la gestión de la producción se centran en el análisis de coste y beneficio de las implantaciones de sistemas. La revisión de la literatura revela que el éxito de las TI para la coordinación de redes industriales depende en gran medida de características de tres dimensiones: la configuración de la red industrial, los esquemas de coordinación y las funcionalidades del software. La literatura disponible está enfocada sobre todo en los beneficios de las implantaciones de SCM software. Sin embargo, la coordinación de la cadena de suministro, basándose en el sistema ERP, sigue siendo la práctica industrial generalizada, pero el coste de coordinación asociado no ha sido abordado por los investigadores. Los fundamentos de diseño organizativo eficiente se explican en detalle en la medida necesaria para la comprensión de la síntesis de las diferentes formas de organización. Se han generado varios esquemas de coordinación variando los siguientes parámetros de diseño: la estructura organizativa, los mecanismos de coordinación y el soporte por TI. Las diferentes propuestas de organización desarrolladas son evaluadas por un método heurístico y otro basado en la simulación por eventos discretos. Para ambos métodos, se tienen en cuenta los principios de la teoría de la organización. La falta de rendimiento empresarial se debe a las dependencias entre actividades que no se gestionan adecuadamente. Dentro del método heurístico, se clasifican las dependencias y se mide su intensidad basándose en factores contextuales. A continuación, se valora la idoneidad de cada elemento de diseño organizativo para cada dependencia específica. Por último, cada forma de organización se evalúa basándose en la contribución de los elementos de diseño tanto al beneficio como al coste. El beneficio de coordinación se refiere a la mejora en el rendimiento logístico - este concepto es el objeto central en la mayoría de modelos de evaluación de la gestión de la cadena de suministro. Por el contrario, el coste de coordinación que se debe incurrir para lograr beneficios no se suele considerar en detalle. Procesos iterativos son costosos si se ejecutan manualmente. Este es el caso cuando SCM software no está implementada y el sistema ERP es el único instrumento de coordinación disponible. El modelo heurístico proporciona un procedimiento simplificado para la clasificación sistemática de las dependencias, la cuantificación de los factores de influencia y la identificación de configuraciones que indican el uso de formas organizativas y de soporte de TI más o menos complejas. La simulación de eventos discretos se aplica en el segundo modelo de evaluación utilizando el paquete de software ‘Plant Simulation’. Con respecto al rendimiento logístico, por un lado se mide el coste de fabricación, de inventario y de transporte y las penalizaciones por pérdida de ventas. Por otro lado, se cuantifica explícitamente el coste de la coordinación teniendo en cuenta los ciclos de coordinación iterativos. El método se aplica a una configuración de cadena de suministro ejemplar considerando diversos parámetros. Los resultados de la simulación confirman que, en la mayoría de los casos, el beneficio aumenta cuando se intensifica la coordinación. Sin embargo, en ciertas situaciones en las que se aplican ciclos de planificación manuales e iterativos el coste de coordinación adicional no siempre conduce a mejor rendimiento logístico. Estos resultados inesperados no se pueden atribuir a ningún parámetro particular. La investigación confirma la gran importancia de nuevas dimensiones hasta ahora ignoradas en la evaluación de propuestas organizativas y herramientas de TI. A través del método heurístico se puede comparar de forma rápida, pero sólo aproximada, la eficiencia de diferentes formas de organización. Por el contrario, el método de simulación es más complejo pero da resultados más detallados, teniendo en cuenta parámetros específicos del contexto del caso concreto y del diseño organizativo. ABSTRACT Transactional systems such as Enterprise Resource Planning (ERP) systems have been implemented widely while analytical software like Supply Chain Management (SCM) add-ons are adopted less by manufacturing companies. Although significant benefits are reported stemming from SCM software implementations, companies are reluctant to invest in such systems. On the one hand this is due to the lack of methods that are able to detect benefits from the use of SCM software and on the other hand associated costs are not identified, detailed and quantified sufficiently. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment in IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and corresponding methods are comprehensive tools for strategic IT decision making. The purpose of this research is to provide evaluation methods that allow the comparison of different organizational forms and software support levels. The research begins with a comprehensive introduction dealing with the business environment that industrial networks are facing and concludes highlighting the challenges for the supply chain software industry. Afterwards, the central terminology is addressed, focusing on organization theory, IT investment peculiarities and supply chain management software typology. The literature review classifies recent supply chain management research referring to organizational design and its software support. The classification encompasses criteria related to research methodology and content. Empirical studies from management science focus on network types and organizational fit. Novel planning algorithms and innovative coordination schemes are developed mostly in the field of operations research in order to propose new software features. Operations and production management researchers realize cost-benefit analysis of IT software implementations. The literature review reveals that the success of software solutions for network coordination depends strongly on the fit of three dimensions: network configuration, coordination scheme and software functionality. Reviewed literature is mostly centered on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but the associated coordination cost has not been addressed by researchers. Fundamentals of efficient organizational design are explained in detail as far as required for the understanding of the synthesis of different organizational forms. Several coordination schemes have been shaped through the variation of the following design parameters: organizational structuring, coordination mechanisms and software support. The different organizational proposals are evaluated using a heuristic approach and a simulation-based method. For both cases, the principles of organization theory are respected. A lack of performance is due to dependencies between activities which are not managed properly. Therefore, within the heuristic method, dependencies are classified and their intensity is measured based on contextual factors. Afterwards the suitability of each organizational design element for the management of a specific dependency is determined. Finally, each organizational form is evaluated based on the contribution of the sum of design elements to coordination benefit and to coordination cost. Coordination benefit refers to improvement in logistic performance – this is the core concept of most supply chain evaluation models. Unfortunately, coordination cost which must be incurred to achieve benefits is usually not considered in detail. Iterative processes are costly when manually executed. This is the case when SCM software is not implemented and the ERP system is the only available coordination instrument. The heuristic model provides a simplified procedure for the classification of dependencies, quantification of influence factors and systematic search for adequate organizational forms and IT support. Discrete event simulation is applied in the second evaluation model using the software package ‘Plant Simulation’. On the one hand logistic performance is measured by manufacturing, inventory and transportation cost and penalties for lost sales. On the other hand coordination cost is explicitly considered taking into account iterative coordination cycles. The method is applied to an exemplary supply chain configuration considering various parameter settings. The simulation results confirm that, in most cases, benefit increases when coordination is intensified. However, in some situations when manual, iterative planning cycles are applied, additional coordination cost does not always lead to improved logistic performance. These unexpected results cannot be attributed to any particular parameter. The research confirms the great importance of up to now disregarded dimensions when evaluating SCM concepts and IT tools. The heuristic method provides a quick, but only approximate comparison of coordination efficiency for different organizational forms. In contrast, the more complex simulation method delivers detailed results taking into consideration specific parameter settings of network context and organizational design.