An integrated modeling approach to assess the impact on road freight transport demand of allowing longer and heavier vehicles (LHVs) in Spain

The assessment on introducing Longer and Heavier Vehicles (LHVs) on the road freight transport demand is performed in this paper by applying an integrated modeling approach composed of a Random Utility-Based Multiregional Input-Output model (RUBMRIO) and a road transport network model. The approach strongly supports the concept that changes in transport costs derived from the LHVs allowance as well as the economic structure of regions have both direct and indirect effects on the road freight transport system. In addition, we estimate the magnitude and extent of demand changes in the road freight transportation system by using the commodity-based structure of the approach to identify the effect on traffic flows and on pollutant emissions over the whole network of Spain by considering a sensitivity analysis of the main parameters which determine the share of Heavy-Goods Vehicles (HGVs) and LHVs. The results show that the introduction of LHVs will strengthen the competitiveness of the road haulage sector by reducing costs, emissions, and the total freight vehicles required.

Potential to attract drivers out of their cars in dense urban areas.

Purpose Sustainable mobility urban policies intend reducing car use and increasing walking, cycling and public transport. However, this transfer from private car to these more sustainable modes is only a real alternative where distances are small and the public transport supply competitive enough. This paper proposes a methodology to calculate the number of trips that can be transferred from private car to other modes in city centres. Method The method starts analyzing which kind of trips cannot change its mode (purposes, conditions, safety , etc.), and then setting a process to determine under which conditions trips made by car between given O-D pairs can be transferable. Then, the application of demand models allow to determine which trips fulfil the transferability conditions. The process test the possibility of transfer in a sequential way: firs to walking, then cycling and finally to public transport. Results The methodology is tested through its application to the city of Madrid (Spain), with the result of only some 18% of the trips currently made by car could be made by other modes, under the same conditions of trip time, and without affecting their characteristics. Out of these trips, 75% could be made by public transport, 15% cycling and 10% on foot. The possible mode to be transferred depends on the location: city centre areas are more favourable for walking and cycling while city skirts could attract more PT trips. Conclusions The proposed method has demonstrated its validity to determine the potential of transferring trips out of cars to more sustainable modes. Al the same time it is clear that, even in areas with favourable conditions for walking, cycling and PT trips, the potential of transfer is limited because cars fulfil more properly special requirements of some trips and tours.

Assessment methodology applied to demand measures to change urban mobility behavior

In order to minimize car-based trips, transport planners have been particularly interested in understanding the factors that explain modal choices. Transport modelling literature has been increasingly aware that socioeconomic attributes and quantitative variables are not sufficient to characterize travelers and forecast their travel behavior. Recent studies have also recognized that users’ social interactions and land use patterns influence travel behavior, especially when changes to transport systems are introduced; but links between international and Spanish perspectives are rarely dealt with. The overall objective of the thesis is to develop a stepped methodology that integrate diverse perspectives to evaluate the willingness to change patterns of urban mobility in Madrid, based on four steps: (1st) analysis of causal relationships between both objective and subjective personal variables, and travel behavior to capture pro-car and pro-public transport intentions; (2nd) exploring the potential influence of individual trip characteristics and social influence variables on transport mode choice; (3rd) identifying built environment dimensions on travel behavior; and (4th) exploring the potential influence on transport mode choice of extrinsic characteristics of individual trip using panel data, land use variables using spatial characteristics and social influence variables. The data used for this thesis have been collected from a two panel smartphone-based survey (n=255 and 190 respondents, respectively) carried out in Madrid. Although the steps above are mainly methodological, the application to the area of Madrid allows deriving important results that can be directly used to forecast travel demand and to evaluate the benefits of specific policies that might be implemented in the area. The results demonstrated, respectively: (1st) transport policy actions are more likely to be effective when pro-car intention has been disrupted first; (2nd) the consideration of “helped” and “voluntary” users as tested here could have a positive and negative impact, respectively, on the use of public transport; (3rd) the importance of density, design, diversity and accessibility underlying dimensions responsible for land use variables; and (4th) there are clearly different types of combinations of social interactions, land use and time frame on travel behavior studies. Finally, with the objective to study the impact of demand measures to change urban mobility behavior, those previous results have been considered in a unique way, a hybrid discrete choice model has been used on a 5th step. Then it can be concluded that urban mobility behavior is not only ruled by the maximum utility criterion, but also by a strong psychological-environment concept, developed without the mediation of cognitive processes during choice, i.e., many people using public transport on their way to work do not do it for utilitarian reasons, but because no other choice is available. Regarding built environment dimensions, the more diversity place of residence, the more difficult the use of public transport or walking.

Evolution over time of heavy vehicle volume in toll roads: A dynamic panel data to identify key explanatory variables in Spain

Improving the knowledge of demand evolution over time is a key aspect in the evaluation of transport policies and in forecasting future investment needs. It becomes even more critical for the case of toll roads, which in recent decades has become an increasingly common device to fund road projects. However, literature regarding demand elasticity estimates in toll roads is sparse and leaves some important aspects to be analyzed in greater detail. In particular, previous research on traffic analysis does not often disaggregate heavy vehicle demand from the total volume, so that the specific behavioral patternsof this traffic segment are not taken into account. Furthermore, GDP is the main socioeconomic variable most commonly chosen to explain road freight traffic growth over time. This paper seeks to determine the variables that better explain the evolution of heavy vehicle demand in toll roads over time. To that end, we present a dynamic panel data methodology aimed at identifying the key socioeconomic variables that explain the behavior of road freight traffic throughout the years. The results show that, despite the usual practice, GDP may not constitute a suitable explanatory variable for heavy vehicle demand. Rather, considering only the GDP of those sectors with a high impact on transport demand, such as construction or industry, leads to more consistent results. The methodology is applied to Spanish toll roads for the 1990?2011 period. This is an interesting case in the international context, as road freight demand has experienced an even greater reduction in Spain than elsewhere, since the beginning of the economic crisis in 2008.

Explaining light vehicle demand evolution in interurban toll roads: a dynamic panel data analysis in Spain

Tolls have increasingly become a common mechanism to fund road projects in recent decades. Therefore, improving knowledge of demand behavior constitutes a key aspect for stakeholders dealing with the management of toll roads. However, the literature concerning demand elasticity estimates for interurban toll roads is still limited due to their relatively scarce number in the international context. Furthermore, existing research has left some aspects to be investigated, among others, the choice of GDP as the most common socioeconomic variable to explain traffic growth over time. This paper intends to determine the variables that better explain the evolution of light vehicle demand in toll roads throughout the years. To that end, we establish a dynamic panel data methodology aimed at identifying the key socioeconomic variables explaining changes in light vehicle demand over time. The results show that, despite some usefulness, GDP does not constitute the most appropriate explanatory variable, while other parameters such as employment or GDP per capita lead to more stable and consistent results. The methodology is applied to Spanish toll roads for the 1990?2011 period, which constitutes a very interesting case on variations in toll road use, as road demand has experienced a significant decrease since the beginning of the economic crisis in 2008.

Propuesta de un marco conceptual para el análisis comparativo de las redes de distribución de dos supermercados online = Proposal of a conceptual framework for the comparative analysis of the distribution networks of two online supermarkets

In this article the network configuration for fulfillment and distribution of online orders of two British retailers is analyzed and compared. For this purpose, it is proposed a conceptual framework that consists of the key following aspects: network configuration, transportation management and location of demand. As a result is not obvious to determine the ideal centralization degree in each case. Finally, it is suggested the future development of an analytic tool that helps to choose the most appropriate model.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

Criterios de optimización de los incentivos en contratos de concesión ligados a indicadores de calidad de servicio para firmes bituminosos

Actualmente se está empezando a consolidar una nueva forma de gestionar la conservación y mantenimiento de la red viaria de las Administraciones Públicas, basándose en contratos de colaboración público-privadas (PPP). Las motivaciones que están provocando este movimiento son de diversa índole. Por un lado, en el seno de la Unión Europea, existen serias restricciones presupuestarias debido al alto endeudamiento del sector público, lo que está llevando a buscar la forma óptima de disminuir el endeudamiento público, sin dejar de prestar servicios a la sociedad como la conservación y mantenimiento de las redes viarias. Por esta vertiente, se trata de convertir contratos convencionales de conservación viaria a esquemas de colaboración público-privada, donde se transferiría al sector privado el riesgo de disponibilidad de la vía mediante el uso de indicadores de calidad y servicio. Con esta transferencia de riesgo, junto con la transferencia del riesgo de demanda/construcción, no consolidaría la deuda de la sociedad de propósito específico constituida para la gestión del contrato de colaboración público-privada dentro de las cuentas públicas, con lo que se conseguiría no aumentar el déficit público, permitiendo continuar ofreciendo el servicio demandado por la sociedad. Por otro lado, la segunda motivación del desarrollo de este tipo de contratos, no tan economicista como la anterior y más enfocada a la gestión, se trata de utilizar los contratos de gestión basados en el uso de indicadores de calidad de servicio para mejorar las prestaciones de la red viaria competencia de una Administración. Con el uso de estos indicadores, el gestor tiene una herramienta muy útil para controlar la actividad del sector privado y asegurar que se ofrece un buen servicio. En la presente tesis, la investigación se ha centrado más en la vertiente de los indicadores de calidad relacionados con la gestión eficiente de las vías objeto de conservación y mantenimiento mediante el empleo de contratos de gestión privada que utilicen este tipo de herramientas de control, monitorización y gestión. En una primera parte, la presente tesis estudia el estado de la red de carreteras, referido principalmente a España, comparando su estado con el resto de redes de carreteras de Europa, detectando las principales carencias de la misma, sobre todo en cuanto a la gestión y conservación de firmes. En un segundo bloque, la tesis analiza el estado del arte de los nuevos procedimientos de gestión de la conservación y mantenimiento basados en indicadores de calidad del servicio en el mundo, destacándose que se trata de un tema relativamente reciente, con gran interés para el sector de la gestión y financiación de infraestructuras viarias. Al ser tan novedoso, por la falta de experiencias previas, las distintas Administración, tanto propias como foráneas, han pecado de un exceso de celo a la hora de establecer los umbrales sobre los que giran los distintos indicadores de calidad de servicio que permiten controlar la gestión de la conservación y mantenimiento de la vía. Partiendo de la labor de análisis descrita, la tesis realiza una investigación más detallada de los indicadores de calidad de servicio correspondientes a firmes bituminosos, debido a que estos indicadores son los más delicados y decisivos a la hora de realizar una correcta gestión de la vía a largo plazo. Dentro de los indicadores de firmes bituminosos, se ha realizado un modelo específico de evolución de comportamiento a lo largo del tiempo de la regularidad superficial, parámetro básico para numerosas Administraciones y organismos investigadores para poder conocer la evolución de un firme a lo largo del tiempo. A esta metodología se le ha dado el nombre de Modelo JRB para evaluar la racionalidad económica de indicadores de calidad asociados a parámetros de firmes. El modelo propuesto básicamente evalúa el valor óptimo desde la perspectiva económica que ha de tener el parámetro técnico que defina alguna propiedad del firme, aplicado a la definición de los indicadores de calidad de servicio. Esta visión del valor umbral del indicador deja a un lado consideraciones de equidad o de cualquier otra índole, basándose más en una visión económica. La metodología del Modelo JRB se puede aplicar a cualquier indicador de calidad relacionado con firmes, ya que lo que se obtiene es el valor óptimo económico que debería tener el umbral del indicador de calidad. El Modelo JRB consta de varias fases. En las primeras etapas el Modelo realiza el cálculo de los costes totales de transporte utilizando como herramienta el software HDM-IV desarrollado por el Banco Mundial. En etapas posteriores, el Modelo realiza análisis de sensibilidad para distintas propuestas de sección de firme, intensidades de tráfico y restricciones al parámetro técnico que define el indicador de calidad de servicio. Como ejercicio práctico de cara a contrastar la metodología del Modelo JRB se ha realizado un Caso de Estudio. Se ha tomado un tramo teórico, con características similares a la red de carreteras española, y con una flota vehicular similar a la española, donde se ha elegido como indicador de calidad la regularidad superficial (IRI). Con las sensibilidades realizadas con el Modelo JRB, se ha determinado el rango de valores que debería tener un indicador de calidad basado en el IRI para que dichos valores fueran óptimos desde la perspectiva económica Nowadays is becoming a new way to manage O&M (operation and maintenance) in public road networks, based on PPP contracts (public-private partnership). There are several issues which are driving this trend. On the one hand, EU (European Union) has serious budgetary constraints due to the high public sector borrowing. EU politicians are looking for the best way to reduce public debt, keeping services to society such as O&M of road networks. For this aspect, conventional O&M contracts are switching to PPP scenarios, where availability risk would be transfer to private sector using PI (performance indicators), along with demand risk transfer With this risk transference, along with the transfer of demand/construction risk, SPV (specific purpose vehicle) debt doesn’t consolidate in public accounts, so deficit wouldn’t increase, allowing the continuation of services demanded by society. On the other hand, the second motivation for developing this kind of contracts, not so economist as above and more focused to management, it is about using O&M contracts based on the use of PI to improve road network maintenance. Using these indicators, manager has a very useful tool to monitor private sector activity and ensure that it is provided a good service. In this thesis, the research has been focused on PI quality aspect, related with efficient management of PPP contracts for roads, which use these tools for control, monitoring and management. In the first part, this thesis examines the state of road network, based mainly in Spain, comparing with other road networks in Europe, identifying the main gaps in it, especially with regard to the management and maintenance of pavements. In a second block, the thesis analyzes the state of art of new O&M contracts based on PI in the world, emphasizing that they are relatively recent. These kinds of contracts have a great interest in road management and financing sector. Administrations all around the world have launch tenders with very exigent PI thresholds due to several factors: this knowledge is a new area, the lack of previous experiences and the variety of Administrations which have bid these contracts. Building on the described analysis, thesis develops a more detailed research about PI for bituminous pavements, because these PI are the most delicate and decisive in making a proper long term road management. Among bituminous pavements PI, IRI (International Roughness Index) has been analyzed with more detail and has been developed a specific model of behaviour evolution over time for evenness (IRI), basic parameter for many administrations and research departments in order to know the evolution of a pavement over time. This methodology has been given the name of JRB Model to evaluate the economic rationality of performance indicators associated with pavements parameters. The proposed model basically evaluates the optimal value from an economic perspective it must have the technical parameter which defines some pavement characteristic applied to the definition of performance indicators. This point of view of indicator value threshold sets aside justice considerations or otherwise, based more on an economic perspective. JRB Model methodology can be applied to any performance indicator associated to pavements, because what you get is the economic optimum threshold should have the performance indicator. JRB Model consists of several phases. In the early stages, the Model calculates transport total cost using HDM-IV software, developed by the World Bank, as a tool. In later stages, the Model performs sensitivity analyzes for different pavement section, AADT and restrictions to the technical parameter which defines the performance indicator. As a practical exercise to test JRB Model methodology, it has done a Case Study. It has taken a theoretical section, with similar characteristics to Spanish road network, and a vehicles fleet similar to Spanish. Evenness (IRI) was chosen as a performance indicator. JRB Model calculated some sensitivities, which were useful to determined thresholds range for pavement performance indicators based on IRI to be optimal from an economic perspective.

Producción y gestión habitacional de los pobladores : articulación con la política de vivienda y barrio : trayectoria y problemática actual

Esta tesis analiza las acciones de los pobladores en la creación, consolidación y transformación de su hábitat y en su relación con la política pública de vivienda y barrio en Chile. A partir de la observación directa en terreno y de la revisión de material proveniente de diversas fuentes afirmamos que, aunque los pobladores han hecho un trabajo de producción del hábitat de gran magnitud y generalizado, las políticas públicas no han reconocido suficientemente su papel en la construcción de la ciudad, no han incorporado a cabalidad las potencialidades e innovaciones surgidas de sus prácticas y estrategias, y nunca les han abierto un espacio claro en la toma de decisiones y en la puesta en obra de los programas habitacionales. En el contexto latinoamericano, la política habitacional chilena de los últimos 20 años se ha considerado un éxito y un ejemplo a seguir, puesto que ha demostrado ser eficaz en la disminución del déficit habitacional. Sin embargo, ha tenido efectos urbanos y sociales nefastos, como la construcción de extensos bolsones periféricos de pobreza que se degradan aceleradamente, y la desintegración social que genera la expulsión de los sin casa a la periferia, donde pierden sus redes familiares y sociales. Desde una trinchera opuesta, los allegados, los sin casa que viven al alero de otras familias y representan la mayoría de la demanda por vivienda, exigen quedarse en barrios ya consolidados y evitan las periferias, en parte por mantener una red familiar y social que se sustenta en la proximidad física, en parte por los equipamientos y servicios con que cuentan estos barrios y la cercanía a las fuentes de empleo. Al mismo tiempo, los responsables de diseñar la política habitacional no han buscado establecer una forma de colaboración con los pobladores —principales receptores de la política— con el fin ajustar los programas públicos a las necesidades de las familias de bajos ingresos y a las realidades socioculturales de sus barrios. Por el contrario, han privilegiado una alianza con el sector privado, que conoce muy limitadamente las demandas de las familias. Así, en lugar de construir ciudades más justas, la política habitacional ha alimentado un mercado inmobiliario sustentado en la especulación del suelo y fomentado la industria de la construcción. La pregunta que guía esta investigación es cómo incorporar el conocimiento acumulado y los procedimientos probados por los pobladores al diseño y la implementación de programas habitacionales y urbanos que promuevan procesos de regeneración de las poblaciones y mejoren la distribución de la vivienda social en la ciudad. Sostenemos que los pobladores, a lo largo de una trayectoria de más de medio siglo, han adquirido y consolidado todas las competencias para construir vivienda, mejorar sus barrios e incorporarse a la discusión sobre ordenamiento territorial. Así, hoy están capacitados para asumir un papel protagónico en la definición de políticas públicas que apunte a la construcción de ciudades más sostenibles y equitativas. La producción social del hábitat vinculada al derecho a la ciudad y a la participación de los pobladores «desde abajo» está bastante documentada en la literatura latinoamericana. En Chile se han escrito numerosos trabajos y evaluaciones sobre la política habitacional, pero los estudios sobre el movimiento de pobladores, enfocados desde las ciencias sociales o multidisciplinares, tienen un auge primero, durante los años 60 y principios de los 70 y luego, en la segunda mitad de los 80, pero posteriormente dejan de publicarse, a excepción de algunas investigaciones de historia urbana o social. En cuanto a los estudios que abordan las acciones de los pobladores desde una mirada puesta en los resultados de la producción y la gestión habitacional y urbana, estos han sido especialmente escasos y ninguno abarca un período largo. La tesis aborda entonces las acciones específicas que emprenden los pobladores a distintas escalas territoriales —el conjunto, el barrio, la población, la ciudad y el país—, su relación con la política habitacional y su articulación con los demás actores que intervienen en la producción material del hábitat. Lo realizado por los pobladores se estudia a la luz del largo plazo, desde la promulgación de la primera ley de vivienda en 1906 hasta nuestros días, con el énfasis puesto entre los años 1990 y 2010, período de producción masiva y sostenida de vivienda social, financiada por el Estado y construida por el sector privado en la periferia urbana, y más detalladamente entre 2006 y 2010, cuando los pobladores irrumpen con la «gestión vecinal» y la «autogestión» como medios para implementar los programas habitacionales del gobierno. Para ello se recorre toda la trayectoria y se complementa con procesos particulares, a la manera de un lente de acercamiento con el cual se focalizan y amplifican trece casos de estudios, para ilustrar modos de producción y gestión concretos y mostrar cómo estos se inscriben en modos de hacer genéricos de los pobladores. Finalmente, con el lente centrado en el último ciclo de este proceso escribimos el capítulo inédito de los últimos veinte años de esta historia. Primero se realiza la reconstrucción de tres casos de estudio «en profundidad», que incluyen la génesis, la consolidación y las transformaciones del conjunto o barrio. Estos casos de estudio «en profundidad» se ponen en perspectiva reconstruyendo la trayectoria histórica de la producción y gestión realizada por los pobladores. Esta reconstrucción de largo período se profundiza con tres casos de estudio «específicos», de dimensión histórica, que tratan el conflicto del acceso a suelo. Finalmente se analizan las interrogantes que plantean estos procesos hoy en día para la producción y gestión de vivienda y barrio a futuro, a partir de entrevistas a actores claves y de la reconstrucción de siete casos de estudio «específicos» de acceso a suelo ilustrativos del período actual. La tesis sustenta que los pobladores, con las acciones de gestión y autogestión que realizan desde 2006, e interviniendo en la discusión sobre los instrumentos de planificación territorial a partir del mismo año, se sitúan actualmente en una nueva plataforma de acción y negociación desde la cual pueden incorporarse, con todas las competencias necesarias, a la definición de las políticas públicas y así dotarlas de pertinencia y coherencia para contribuir a superar la pobreza con respuestas más acorde a sus realidades. ABSTRACT This thesis analyzes the actions of pobladores in the creation, consolidation and transformation of their habitat and their relationship with Chilean public housing and neighbourhood policy. Through direct observation in the field and the review of material from various sources we can affirm that although the pobladores have undertaken widespread work in the production of their environment, public policies have not sufficiently recognized their role in the construction of the city. Public policy has failed to fully incorporate the potential and innovation arising from practices and strategies employed by social housing recipients and has never opened a clear space for them in decision-making or the commissioning work of the housing programs. Within the Latin America context, the Chilean housing policy of the past 20 years has been considered a success and an example to follow given that it has proven effective in reducing the housing deficit. However it has had disastrous urban and social effects, such as construction of large peripheral pockets of poverty that degrade rapidly, and generates social disintegration through the expulsion of the homeless to the periphery, where they lose their family and social networks. On another front those homeless who live under the roof of relatives and who represent the majority of demand for social housing, request to stay in consolidated neighbourhoods avoiding the periphery, partly to maintain family and social networks based on physical proximity and partly because of the facilities and services available in these neighbourhoods and their adjacency to sources of employment. At the same time, those responsible for designing housing policy have not sought to establish a form of collaboration with the pobladores in order to adjust the public programs to the needs of low-income families and the socio-cultural realities of their neighbourhoods. On the contrary an alliance with the private sector has been favored, a sector which has very limited knowledge of the demands of the recipients. Therefore instead of building more equal cities, housing policy has fueled a housing market which supports land speculation and promotes the construction industry. The question leading this research is how to incorporate the accumulated knowledge and proven procedures of the pobladores in the design and implementation of programs that promote housing and urban regeneration processes and which could improve the distribution of social housing in the city. We maintain that social housing recipients over the course of half a century have acquired and consolidated all the skills to build housing, improve neighborhoods and join the discussion on city planning. These residents are now capable of assuming a leading role in defining public policies that aim to build more sustainable and equitable cities. The social production of the environment linked to the right to the city and resident participation from the «bottom-up» is well documented in Latin American literature. In Chile there are extensive written works and assessments on housing policy with multidisciplinary or social science studies on the movement of the pobladores peaking during the 60’s and early 70’s and then again in the second half of the 80’s but afterwards this stops, with the exception of some research on social or urban history. As for studies that address the actions of the pobladores looking at the results of production and housing and urban management these have been particularly scarce and none of which cover a long period of time. The thesis then addresses the specific actions undertaken by the pobladores at different territorial levels; the housing development, the neighbourhood, the community, the city and State, and their relation to housing policy and its coordination with other actors involved in the production process of the built environment. The accomplishments of the pobladores is studied over the long term, since the enactment of the first housing law in 1906 to the present, with an emphasis between 1990 and 2010, a period of mass production and sustained social housing which was State-funded and built by the private sector in the urban periphery, and in particular between 2006 and 2010, when the pobladores break with the «neighborhood management» and «self-management» as a means to implement the housing programs of the government. To this end the entire process is outlined and is complemented by specific processes which are placed under a lens in order to focus and amplify thirteen case studies illustrating actual ways of production and management and to show how these ways of doing things are generic to the pobladores. Finally, with the lens focused on the last cycle of this process we write the new chapter of the last twenty years of this history. First there is a reconstruction of three case studies «in depth», including their origins, consolidation and the transformation of the sector or neighborhood. These «in depth» case studies are put into perspective reconstructing the historical trajectory of the production and management by the pobladores. This reconstruction over a long period is given great depth by three «specific» case studies, of historical importance, dealing with the conflict of access to land. Finally we analyze the questions raised by these processes for the production and management of housing and neighborhood in the future, based on interviews with key players and the reconstruction of seven case studies specifically regarding access to land and which are illustrative of current practice. The thesis maintains that since 2006 the pobladores through actions of management and selfmanagement and their intervention in the debate on territorial planning has placed them on a new platform for action and negotiation from which they can incorporate themselves, with all the necessary capacities, in the definition of public policy and therefore provide it with a pertinence and coherence to help towards overcoming poverty with answers more according to their realities.

Associations among Physician Advice, Physical Activity, and Sociodemographic Groups in Older Spanish Adults

This study examined the relationship between medical advice to engage in physical activity with type of demand required by physical activity and demographic variables. A cross-sectional study was developed, featuring a questionnaire on physicians? advice, and type of demand. The questionnaire was completed by a probability and nationwide sample of older adults in Spain ( n = 933, M = 74.1, range 65?93), randomly selected using multistage sampling. More physically active older adults have, more often than the less active, received physicians? advice to engage in physical activity. There is a signifi cant relationship between medical advice and type of demand ( p menor que .01) and age ( p menor que .05). However, no relationship was found between physician medical advice and gender, social class, or income. Physicians can effectively promote physical activity among sedentary older adults through appropriate advice. Consequently, health authorities should promote physicians' advising older patients to pursue physical activity.

Improving photovoltaics grid integration through short time forecasting and self-consumption

The uncertainty associated to the forecast of photovoltaic generation is a major drawback for the widespread introduction of this technology into electricity grids. This uncertainty is a challenge in the design and operation of electrical systems that include photovoltaic generation. Demand-Side Management (DSM) techniques are widely used to modify energy consumption. If local photovoltaic generation is available, DSM techniques can use generation forecast to schedule the local consumption. On the other hand, local storage systems can be used to separate electricity availability from instantaneous generation; therefore, the effects of forecast error in the electrical system are reduced. The effects of uncertainty associated to the forecast of photovoltaic generation in a residential electrical system equipped with DSM techniques and a local storage system are analyzed in this paper. The study has been performed in a solar house that is able to displace a residential user?s load pattern, manage local storage and estimate forecasts of electricity generation. A series of real experiments and simulations have carried out on the house. The results of this experiments show that the use of Demand Side Management (DSM) and local storage reduces to 2% the uncertainty on the energy exchanged with the grid. In the case that the photovoltaic system would operate as a pure electricity generator feeding all generated electricity into grid, the uncertainty would raise to around 40%.

Simulación de mercado diario y previsión a 20 años del sector eléctrico peninsular

En este proyecto se crea un modelo de casación de ofertas de venta y de adquisición de energía eléctrica. Este modelo sirve para simular, de manera simplificada, el proceso de casación que tiene lugar en el mercado Diario peninsular (España y Portugal). Con el fin de averiguar el comportamiento del sector eléctrico, en este aspecto, en el futuro, se extrapolan las ofertas de adquisición según una evolución prevista de demanda y se utiliza el modelo creado para prever el mix energético y los precios de la electricidad. Esta previsión se hace en base a tres escenarios. Uno en el que hay un importante autoabastecimiento de energía eléctrica en los puntos de consumo residenciales; otro en el que el vehículo eléctrico entra de manera significativa en el parque automovilístico peninsular; y el tercero en el que las energías renovables asumen el principal peso de la cobertura de energía eléctrica. Abstract In this project a model for matching sale and purchase bids of electricity power is created. The model simulates, simplified, the process of setting energy and prices in the Daily Market of the Iberian Peninsula (Spain and Portugal). In order to determine the electricity sector behavior in the future, purchase bids are extrapolated following a prevision of demand and the model is used to predict the generation technologies mix and electricity prices. This forecast is based on three possible scenarios. The first one assumes significant self-supply of electricity in residential areas; the second one considers that the electric vehicle relevantly enters the peninsular fleet; the third one supposes that renewable energies cover the majority of electric energy.

Las Opciones Reales en los Expedientes de Regulación de Empleo

Las empresas en situación económica negativa, recurren en España a los Expedientes de Regulación de Empleo que es la figura legal que permite ajustar sus plantillas y cuya utilización se acrecienta en épocas de crisis. El objetivo de esta investigación se focaliza en la integración de la Teoría de Opciones Reales en los proyectos organizativos de recursos humanos, en particular en el estudio y aplicación de la opción de contracción y de la opción de aplazamiento a los proyectos de desarrollo de los Expedientes de Regulación de Empleo. Las opciones reales son una herramienta de gestión, novedosa y contrastada, que posibilita realizar la valoración de los Expedientes de Regulación de Empleo tomando en consideración las incertidumbres futuras, lo que permite cuantificar mejor el resultado de la decisión y supone un avance sobre la valoración realizada de forma estática. Dos aspectos clave ha sido necesario resolver. En primer lugar determinar la fuente de incertidumbre que ponga en valor las opciones reales para este tipo de proyectos y como consecuencia desarrollar los procedimientos para obtener el valor de la opción. La puesta en valor de la opción de contracción permite, a partir de la consideración de la demanda como factor de incertidumbre, desarrollar un modelo que proporciona el valor óptimo del número de contratos de trabajo a extinguir, de modo que sitúa a la organización en la mejor posición para la toma de decisiones. La resolución del modelo se logra con la ayuda de la herramienta “The Newsvendor Model”, que facilita la obtención el valor óptimo. En la aplicación de la opción de aplazamiento se ha concluido asimismo, que la volatilidad de la demanda es la fuente de incertidumbre que hace viable la opción y a partir de dicha incertidumbre se ha desarrollado un procedimiento basado en el árbol binomial que permite obtener su valor. Una vez desarrollados los dos modelos para las opciones de contracción y aplazamiento, se ha elaborado un modelo conjunto con ambas opciones, integrando los resultados obtenidos en cada caso. Para validar los modelos obtenidos se presenta su aplicación al caso real de una empresa en situación económica negativa que requiere la necesidad de llevar a cabo un Expediente de Regulación de Empleo, lo que ha permitido comprobar la utilidad de dichos desarrollos, al obtener resultados que facilitan la toma de decisiones y que presentan soluciones que pueden ser más equilibradas para los trabajadores de la empresa, aspecto clave a tener en cuenta, dado el coste personal, familiar y social de este tipo de proyectos. La integración de las opciones reales en la gestión de recursos humanos tiene un amplio campo de aplicación, dadas las diferentes inversiones que se pueden llevar a cabo sobre el capital humano. Aunque esta investigación se ha focalizado en la opcionalidad de las inversiones para el ajuste de plantilla, existen otro tipo de inversiones en recursos humanos, como son las dedicadas a formación, motivación, adecuación o incorporación de personal, que también estarán sujetas a opcionalidad si existen incertidumbres a futuro. Con el objetivo de avanzar en el estudio y aplicación de las opciones reales a estas inversiones, se presenta un marco conceptual que identifica las bases de partida en lo referente a los retornos de las inversiones y las incertidumbres futuras. Con los resultados obtenidos en esta investigación se entiende que se ha conseguido el objetivo de aplicar la Teoría de Opciones Reales a los Expedientes de Regulación de Empleo y con ello establecer la posibilidad de mejorar las implicaciones sociales de estos proyectos dentro de la empresa y en la sociedad. ABSTRACT During crisis times, like the one Spain has been going through on the last years, the Collective Dismissal Procedure is an important issue to be considered within companies that are having a negative economic situation. This research focuses on the integration of the Real Options Theory for organizational projects in the management of human resources, and particularly the study and inclusion of the option to contract and the deferral option in Collective Dismissal Procedures. The Real Options Theory, an innovative management tool that has been proven as correct, help to improve the assessment of the Collective Dismissal Procedures using the dynamic demand instead of the static demand, giving a better quantification of the decision that is going to be taken. Two main issues which are hoped to be resolve are examined: the search for a source of uncertainty to make the real options viable for this type of projects, and consequently the development of a procedure to obtain the value of the option. The option to contract allows, from the consideration of the demand as a factor of uncertainty, to develop a model obtaining the optimal value in the reduction of the workforce, therefore allowing the organization to place itself in the best position for the decision making. The resolution of this model is achieved with the help of "The Newsvendor Model" tool, which facilitates obtaining the optimal value. The analysis performed in the deferral option also concluded that the volatility of demand is the source of the uncertainty that makes the option viable and the procedure developed by the binomial tree is the tool that enables the value of the option to be found. Once developed two models for contraction and deferment options, a joint model has been developed including both options by integrating the results obtained in each case. To validate the models, the real case of a company in negative economic situation requiring the need to carry out a procedure for collective redundancies is applied. This has demonstrated the usefulness of this kind of development that can deliver results to improve the decision making and provide more balanced solutions for company employees, key consideration given the impact on personal, family life and social environment of these Collective Dismissal Procedures. The integration of real options in the management of human resources has broad scope, given the different investments that can be performed on the human capital. Although this research has focused on the optionality of investments for downsizing, there are other investments in human resources for training, motivation, arrangement or incorporation of staff that are also subject to optionality if there are future uncertainties. With the aim of advancing the study and application of real options to these investments, a conceptual framework is presented that identifies the basis of research in terms of the investment returns and future uncertainties. With the results obtained on this research it is clearly defined the objectives for which this work was started for, the application of the Real Options Theory to the Collective Dismissal Procedure. And thereby achieve the final goal of improving the social impact of these projects within a company and society.

Análisis de la actividad física competitiva en jugadores de fútbol de un equipo de excelencia

OBJETIVO: Esta tesis doctoral pretende analizar el rendimiento en fútbol desde un punto de vista físico de los jugadores de un equipo de excelencia (EE). Se entiende como EE a un equipo que presenta un prolongado bagaje de éxitos nacionales e internacionales a lo largo de varios años. MÉTODO: Se utilizó el sistema de registro (AMISCO) de la actividad del jugador de fútbol en competición (distancia total recorrida, distancias a distintas velocidades, y número de sprints) analizando a lo largo de seis temporadas continuada la actividad de jugadores de élite (N=2082), siendo 1051 pertenecientes al EE y 1031 a jugadores de los equipos rivales (ER). RSULTADO: El perfil de actividad (distancia total, distancia en distintas velocidades y nº de sprints) de los jugadores del EE muestran valores inferiores al de los jugadores de los ER. De igual forma ocurre en cada una de las partes del partido, el puesto específico de juego de los jugadores en las distintas temporadas analizadas y en los distintos meses de la temporada. El EE registra una mayor actividad (distancia total recorrida en el partido, distancia recorrida en velocidades altas V>17 km/h y nº de Sprints) cuando juega de local a cuando lo hace como visitante. Asimismo EE muestra demandas superiores de exigencia física en la competición europea (Champions League) frente a la Liga en la distancia total recorrida en el partido y a velocidades bajas (V<17 km/h), mientras que apenas muestra diferencias en los indicadores de exigencia física cuando se enfrenta a los equipos rivales de distinto nivel de rendimiento, exceptuando en la distancia recorrida andando (V=01-11 km/h) con diferencias significativas superiores cuando el nivel del oponente es de Máxima dificultad frente a Elevada dificultad (p<.01) o Media dificultad (p<.01). En función del estilo de juego se registran diferencias en la distancia total recorrida en el partido, en velocidades bajas (V<17 km/h) y en el nº de Sprints (V>24 km/h). Por último, el perfil de actividad del EE no se ve influenciado por el efecto de estar sometido a una alta densidad competitiva (jugar un partido entre semana). Se constata como un jugador de un EE está supeditado no sólo a las exigencias del puesto específico sino también está sujeta a las características propias del jugador al desempeñar el rol o función táctica encomendada. Esta influencia es más evidente en jugadores que ocupan puestos específicos avanzados. CONCLUSION: La presente investigación aporta la caracterización de la actividad de los jugadores de un EE frente al perfil de actividad de sus rivales, mostrando un nivel de respuesta específica y diferente, más estable frente a determinadas variables contextuales y donde la exigencia física en el puesto específico se ve condicionada por las características individuales del jugador, todos estos aspectos pueden ayudar a la hora de planificar el entrenamiento en este tipo de equipos. ABSTRACT OBJETIVE: This doctoral thesis aims to analyze the performance in football from a physical point of view on a team of excellence. METHOD: The registration system (AMISCO) activity soccer player in competition (total distance traveled distances at different speeds, and number of sprints) was used to analyze over six seasons continued activity elite players (N = 2082), with 1051 belonging to Team Excellence (EE) and 1031 players from rival teams (ER). RESULT: The competitive physical response of the US players are analyzed and compared with that of ER. The activity profile (total distance, distance at different speeds and number of sprints) of EE players shown below players ER values. The same occurs in each of the parts of the game, the specific game since players analyzed in different seasons and in different months of the season. The EE recorded increased activity (total distance traveled in the match, distance at high speeds V> 17 km / h and sprints number) when playing a local when it does on the road. EE also shows higher demands physical demands in European competition (Champions League) against the League in the total distance traveled in the party and at low speeds (V <17 km / h), while just shows differences in indicators of demand physics when the opposing teams with different levels of performance faces, except in the distance walked (V = 01-11 km / h) with significant differences when higher level Maximum opponent is facing difficulty High difficulty (p < .01) or Medium difficulty (p <.01). Depending on the style of play differences are recognized in the total distance traveled in the party, at low speeds (V <17 km / h) and the number of Sprints (V> 24 km / h). Finally, the activity profile of EE is not influenced by the effect of being subjected to a high competitive density (play a game during the week). It is found as a player on a team of Excellence is subject not only to the requirements of the specific position but is also subject to the characteristics of the player to play the role or function entrusted tactics. This influence is most evident in advanced players who occupy specific positions. CONCLUSION: This research provides the characterization of the activity of EE players versus activity profile of its rivals, showing a level of response specific and different, more stable against certain contextual variables and where the physical demands on the specific position is conditioned by the individual characteristics of the player, all these aspects can help in planning training in this type of equipment.

Sistema autónomo para carga de baterías mediante una instalación fotovoltaica con aplicación directa al vehículo eléctrico y usos

La situación energética actual es insostenible y como consecuencia se plantea un escenario próximo orientado a conseguir un futuro energético sostenible que permita el desarrollo económico y el bienestar social. La situación ambiental actual está afectada directamente por la combustión de combustibles fósiles que en 2013 constituyeron el 81% de la energía primaria utilizada por el ser humano y son la principal fuente antropogénica de gases de efecto invernadero. Los informes del IPCC1, ponen de manifiesto que el cambio climático se ha consolidado durante los últimos años y en la conferencia de la ONU sobre cambio climático de París que se celebrará a finales de 2015, se pretende que los gobiernos suscriban un acuerdo universal para limitar las emisiones de gases de efecto invernadero y evitar que el incremento de la temperatura media global supere los 2°C. Por otra parte, en el interior de las ciudades es especialmente preocupante, por su efecto directo sobre la salud humana, el impacto ambiental producido por las emisiones de NOx que generan el transporte de personas y mercancías. El sector del transporte fue responsable en 2012 del 27,9% del consumo final de energía. Una vez expuesto el escenario energético y ambiental actual, en esta tesis, se analiza la eficiencia de un sistema autónomo fotovoltaico para la carga de baterías de vehículos eléctricos y el uso del mismo con otras cargas, con el objetivo de aprovechar al máximo la energía eléctrica generada y contribuir a la utilización de energía limpia que no produzca impacto ambiental. Como primer paso para el desarrollo de la tesis se hizo un estudio de trabajos previos comenzando por las primeras aplicaciones de la energía fotovoltaica en los vehículos solares para después pasar a trabajos más recientes enfocados al suministro de energía a los vehículos eléctricos. También se hizo este estudio sobre las metodologías de simulación en los sistemas fotovoltaicos y en el modelado de distintos componentes. Posteriormente se eligieron, dentro de la amplia oferta existente en el mercado, los componentes con características técnicas más adecuadas para este tipo de instalaciones y para las necesidades que se pretenden cubrir. A partir de los parámetros técnicos de los componentes elegidos para configurar la instalación autónoma y utilizando modelos contrastados de distintos componentes, se ha desarrollado un modelo de simulación en ordenador del sistema completo con el que se han hecho simulaciones con distintos modos de demanda de energía eléctrica, según los modos de carga disponibles en el vehículo eléctrico para corriente alterna monofásica de 230 V. También se han simulado distintos tamaños del generador fotovoltaico y del sistema de acumulación de energía eléctrica para poder determinar la influencia de estos parámetros en los balances energéticos del sistema. Utilizando recursos propios el doctorando ha realizado la instalación real de un sistema fotovoltaico que incluye sistema de acumulación e inversor en un edificio de su propiedad. Para la realización de la tesis, La Fundación de Fomento e Innovación Industrial (F2I2) ha facilitado al doctorando un dispositivo que permite realizar la alimentación del vehículo eléctrico en modo 2 (este modo emplea un adaptador que incorpora dispositivos de seguridad y se comunica con el vehículo permitiendo ajustar la velocidad de recarga) y que ha sido necesario para los trabajos desarrollados. Se ha utilizado la red eléctrica como sistema de apoyo de la instalación fotovoltaica para permitir la recarga en el modo 2 que requiere más potencia que la proporcionada por el sistema fotovoltaico instalado. Se han analizado mediante simulación distintos regímenes de carga que se han estudiado experimentalmente en la instalación realizada, a la vez que se han hecho ensayos que se han reproducido mediante simulación con los mismos valores de radiación solar y temperatura con objeto de contrastar el modelo. Se han comparado los resultados experimentales con los obtenidos mediante simulación con objeto de caracterizar el comportamiento del sistema de acumulación (energía eléctrica suministrada y tensión de salida en las baterías) y del generador fotovoltaico (energía eléctrica fotovoltaica suministrada). Por último, se ha realizado un estudio económico de la instalación autónoma fotovoltaica ejecutada y simulada. En el mismo se ha planteado la utilización de fondos propios (como realmente se ha llevado a cabo) y la utilización de financiación, para determinar dos posibles escenarios que pudieran ser de utilidad a un propietario de vehículo eléctrico. Se han comparado los resultados obtenidos en los dos escenarios propuestos del estudio económico del sistema, en cuanto a los parámetros de tiempo de retorno de la inversión, valor actual neto de la inversión y tasa interna de retorno de la misma. Las conclusiones técnicas obtenidas, permiten la utilización del sistema con los modos de carga ensayados y otro tipo de cargas que aprovechen la generación eléctrica del sistema. Las baterías ofrecen mejor comportamiento cuando el aporte fotovoltaico está presente, pero no considera adecuado la conexión de cargas elevadas a un sistema de acumulación de gel (plomo-acido) como el que se ha utilizado, debido al comportamiento de este tipo de baterías ante demandas de intensidad de corriente eléctrica elevadas. Por otra parte, el comportamiento de este tipo de baterías con valores de intensidad de corriente eléctrica inferiores a 10 A en ausencia de energía fotovoltaica, con el objetivo de utilizar la generación de energía eléctrica diaria acumulada en el sistema, sí resulta interesante y ofrece un buen comportamiento del sistema de acumulación. Las circunstancias actuales de mercado, que carece de sistemas de acumulación de litio con precios de compra interesantes, no han permitido poder experimentar este sistema de acumulación en la instalación autónoma fotovoltaica ejecutada, tampoco se ha podido obtener el favor de ningún fabricante para ello. Actualmente hay disponibles sistemas de acumulación en litio que no se comercializan en España y que serían adecuados para el sistema de acumulación de energía propuesto en este estudio, que deja abierta las puertas para futuros trabajos de investigación. Las conclusiones económicas obtenidas, rentabilizan el uso de una instalación autónoma fotovoltaica con consumo instantáneo, sin acumulación de energía eléctrica. El futuro de conexión a red por parte de estas instalaciones, cuando se regule, aportará un incentivo económico para rentabilizar con menos tiempo las instalaciones autónomas fotovoltaicas, esto también deja la puerta abierta a futuros trabajos de investigación. El sistema de acumulación de energía aporta el mayor peso económico de inversión en este tipo de instalaciones. La instalación estudiada aporta indicadores económicos que la hacen rentable, pero se necesitaría que los precios de acumulación de la energía en sistemas eficientes estén comprendidos entre 100-200 €/kWh para que el sistema propuesto en este trabajo resulte atractivo a un potencial propietario de un vehículo eléctrico. ABSTRACT The current energy situation is untenable; it poses a scenario next focused on reaching a sustainable energy future, to allow economic development and social welfare. The environmental current situation is affected directly by the combustion of fossil fuels that in 2013 constituted 81 % of the primary energy used by the human being and they are the principal source human of greenhouse gases. The reports of the IPCC2, they reveal that the climate change has consolidated during the last years and in the conference of the UNO on climate change of Paris that will be celebrated at the end of 2015, there is claimed that the governments sign a universal agreement to limit the emission of greenhouse gases and to prevent that the increase of the global average temperature overcomes them 2°C. On the other hand, inside the cities it is specially worrying, for his direct effect on the human health, the environmental impact produced by the NOx emissions that generate the persons' transport and goods. The sector of the transport was responsible in 2012 of 27,9 % of the final consumption of energy. Once exposed the scenario and present environmental energy, in this thesis, it has analyzed the efficiency of an autonomous photovoltaic system for charging electric vehicles, and the use of the same with other workloads, with the objective to maximize the electrical energy generated and contribute to the use of clean energy that does not produce environmental impact. Since the first step for the development of the thesis did to itself a study of previous works beginning for the first applications of the photovoltaic power in the solar vehicles later to go on to more recent works focused on the power supply to the electrical vehicles. Also this study was done on the methodologies of simulation in the photovoltaic systems and in the shaped one of different components. Later they were chosen, inside the wide existing offer on the market, the components with technical characteristics more adapted for this type of facilities and for the needs that try to cover. From the technical parameters of the components chosen to form the autonomous installation and using models confirmed of different components, a model of simulation has developed in computer of the complete system with which simulations have been done by different manners of demand of electric power, according to the available manners of load in the electrical vehicle for single-phase alternating current of 230 V. Also there have been simulated different sizes of the photovoltaic generator and of the system of accumulation of electric power to be able to determine the influence of these parameters in the energy balances of the system. Using own resources the PhD student has realized a real installation of a photovoltaic system that includes system of accumulation and investing in a building of his property. For the accomplishment of the thesis, The Foundation of Promotion and Industrial Innovation (F2I2) it has facilitated to the PhD student a device that allows to realize the supply of the electrical vehicle in way 2 (this way uses an adapter that incorporates safety devices and communicates with the vehicle allowing to fit the speed of recharges) and that has been necessary for the developed works. The electrical network has been in use as system of support of the photovoltaic installation for allowing it her recharges in the way 2 that more power needs that provided by the photovoltaic installed system. There have been analyzed by means of simulation different rate of load that have been studied experimentally in the realized installation, simultaneously that have done to themselves tests that have reproduced by means of simulation with the same values of solar radiation and temperature in order the model contrasted. The experimental results have been compared by the obtained ones by means of simulation in order to characterize the behavior of the system of accumulation (supplied electric power and tension of exit in the batteries) and of the photovoltaic generator (photovoltaic supplied electric power). Finally, there has been realized an economic study of the autonomous photovoltaic executed and simulated installation. In the same one there has appeared the utilization of own funds (since really it has been carried out) and the utilization of financing, to determine two possible scenes that could be of usefulness to an owner of electrical vehicle. There have been compared the results obtained in both scenes proposed of the economic study of the system, as for the parameters of time of return of the investment, current clear value of the investment and rate hospitalizes of return of the same one. The technical obtained conclusions, they make the utilization of the system viable with the manners of load tested and another type of loads of that they take advantage the electrical generation of the system. The batteries offer better behavior when the photovoltaic contribution is present, but he does not consider to be suitable the connection of loads risen up to a system of accumulation of gel (lead - acid) as the one that has been in use, due to the behavior of this type of batteries before demands of intensity of electrical current raised. On the other hand, the behavior of this type of batteries with low values of intensity of electrical current to 10 To in absence of photovoltaic power, with the aim to use the generation of daily electric power accumulated in the system, yes turns out to be interesting and offers a good behavior of the system of accumulation. The current circumstances of market, which lacks systems of accumulation of lithium with interesting purchase prices, have not allowed to be able to experience this system of accumulation in the autonomous photovoltaic executed installation, neither one could have obtained the favor of any manufacturer for it. Nowadays there are available systems of accumulation in lithium that is not commercialized in Spain and that they would be adapted for the system of accumulation of energy proposed in this study, which makes the doors opened for future works of investigation. The economic obtained conclusions; they make more profitable the use of an autonomous photovoltaic installation with instantaneous consumption, without accumulation of electric power. The future of connection to network on the part of these facilities, when it is regulated, will contribute an economic incentive to make profitable with less time the autonomous photovoltaic facilities, this also leaves the door opened for future works of investigation. The system of accumulation of energy contributes the major economic weight of investment in this type of facilities. The studied installation contributes economic indicators that make her profitable, but it would be necessary that the prices of accumulation of the energy in efficient systems are understood between 100-200 € in order that the system proposed in this work turns out to be attractive to a proprietary potential of an electrical vehicle.