Particle and energy transport in quantum disordered and quasi-periodic chains connected to mesoscopic Fermi reservoirs

We study a model of nonequilibrium quantum transport of particles and energy in a many-body system connected to mesoscopic Fermi reservoirs (the so-called meso-reservoirs). We discuss the conservation laws of particles and energy within our setup as well as the transport properties of quasi-periodic and disordered chains.

Space-time Measurements of Oceanic Sea States

Stereo video techniques are effective for estimating the space–time wave dynamics over an area of the ocean. Indeed, a stereo camera view allows retrieval of both spatial and temporal data whose statistical content is richer than that of time series data retrieved from point wave probes. We present an application of the Wave Acquisition Stereo System (WASS) for the analysis of offshore video measurements of gravity waves in the Northern Adriatic Sea and near the southern seashore of the Crimean peninsula, in the Black Sea. We use classical epipolar techniques to reconstruct the sea surface from the stereo pairs sequentially in time, viz. a sequence of spatial snapshots. We also present a variational approach that exploits the entire data image set providing a global space–time imaging of the sea surface, viz. simultaneous reconstruction of several spatial snapshots of the surface in order to guarantee continuity of the sea surface both in space and time. Analysis of the WASS measurements show that the sea surface can be accurately estimated in space and time together, yielding associated directional spectra and wave statistics at a point in time that agrees well with probabilistic models. In particular, WASS stereo imaging is able to capture typical features of the wave surface, especially the crest-to-trough asymmetry due to second order nonlinearities, and the observed shape of large waves are fairly described by theoretical models based on the theory of quasi-determinism (Boccotti, 2000). Further, we investigate space–time extremes of the observed stationary sea states, viz. the largest surface wave heights expected over a given area during the sea state duration. The WASS analysis provides the first experimental proof that a space–time extreme is generally larger than that observed in time via point measurements, in agreement with the predictions based on stochastic theories for global maxima of Gaussian fields.

Quasi-aplanatic free-form V-groove collimators for LED colour mixing

Two quasi-aplanatic free-form solid V-groove collimators are presented in this work. Both optical designs are originally designed using the Simultaneous Multiple Surface method in three dimensions (SMS 3D). The second optically active surface in both free-form V-groove devices is designed a posteriori as a grooved surface. First two mirror (XX) design is designed in order to clearly show the design procedure and working principle of these devices. Second, RXI free-form design is comparable with existing RXI collimators; it is a compact and highly efficient design made of polycarbonate (PC) performing very good colour mixing of the RGGB LED sources placed off-axis. There have been presented rotationally symmetric non-aplanatic high efficiency collimators with colour mixing property to be improved and rotationally symmetric aplanatic devices with good colour mixing property and efficiency to be improved. The aim of this work was to design a free-form device in order to improve colour mixing property of the rotationally symmetric nonaplanatic RXI devices and the efficiency of the aplanatic ones.

Reversible Urban Entities. Improving public-to-private continuity.

The aim of this paper is to call into question those typologies conventionally used in developing the post-industrial urban fabric (streets, cityblocks, slabs, etc.), often catering to urban designs based on speculative interests and completely overlooking community interests. By defining the concepts of ?postpublic space? and ?reversible urban entities? and illustrating them with an exemplary case of Spanish residential architecture from the 1960s, we establish one possible way of tackling contemporary urban-residential projects. This alternative approach considers the relationship between residential systems and open space systems and promotes the continuity and/or alternation of scales between house and city in an effort to improve the urban quality of life for residents and external users.

Quasi chaotic digital behaviour in an optically processing

Digital chaotic behavior in an optically processing element is reported. It is obtained as the result of processing two fixed train of bits. The process is performed with an Optically Programmable Logic Gate. Possible outputs for some specific conditions of the circuit are given. These outputs have some fractal characteristics, when input variations are considered. Digital chaotic behavior is obtained by using a feedback configuration. A random-like bit generator is presented.

An embedded cohesive crack model for finite element analysis of quasi-brittle materials

This paper presents a numerical implementation of the cohesive crack model for the anal-ysis of quasibrittle materials based on the strong discontinuity approach in the framework of the finite element method. A simple central force model is used for the stress versus crack opening curve. The additional degrees of freedom defining the crack opening are determined at the crack level, thus avoiding the need for performing a static condensation at the element level. The need for a tracking algorithm is avoided by using a consistent pro-cedure for the selection of the separated nodes. Such a model is then implemented into a commercial program by means of a user subroutine, consequently being contrasted with the experimental results. The model takes into account the anisotropy of the material. Numerical simulations of well-known experiments are presented to show the ability of the proposed model to simulate the fracture of quasibrittle materials such as mortar, concrete and masonry.

Electrochemical potentials (Quasi-Fermi Levels) and the operation of hot-carrier, impact-ionization, and intermediate-band solar cells

In the framework of the so-called third generation solar cells, three main concepts have been proposed in order to exceed the limiting efficiency of single-gap solar cells: the hot-carrier solar cell, the impact-ionization or multiple-exciton-generation solar cell, and the intermediate-band solar cell. At first sight, the three concepts are different, but in this paper, we illustrate how all these concepts, including the single-gap solar cell, share a common trunk that we call "core photovoltaic material." We demonstrate that each one of these next-generation concepts differentiates in fact from this trunk depending on the hypotheses that are made about the physical principles governing the electron electrochemical potentials. In the process, we also clarify the differences between electron, phonon, and photon chemical potentials (the three fundamental particles involved in the operation of the solar cell). The in-depth discussion of the physics involved about the operation of these cells also provides new insights about the operation of these cells.

Quasi-isometries and isoperimetric inequalities

We consider the stability of isoperimetric inequalities under quasi-isometries between Riemann surfaces. Kanai observed that quasi-isometries preserve isoperimetric inequalities on complete Riemannian manifolds with finite geometry: positive injectivity radius and Ricci curvature bounded from below (see [2]). In [1], it is shown that the linear isoperimetric inequality is a quasi-isometric invariant for planar Riemann surfaces (genus zero surfaces) with vanishing injectivity radius. Moreover, it is proved that non-linear isoperimetric inequalities can only hold for Riemann surfaces with positive injectivity radius, and hence, by Kanai's observation, preserved by quasi-isometries. In this talk we present an overview on isoperimetric inequalities and give some of the ideas of the proofs of the results cited above.

Quasi-cylindrical approximation to the swirling flow in an atomizer chamber

A quasi-cylindrical approximation is used to analyse the axisymmetric swirling flow of a liquid with a hollow air core in the chamber of a pressure swirl atomizer. The liquid is injected into the chamber with an azimuthal velocity component through a number of slots at the periphery of one end of the chamber, and flows out as an anular sheet through a central orifice at the other end, following a conical convergence of the chamber wall. An effective inlet condition is used to model the effects of the slots and the boundary layer that develops at the nearby endwall of the chamber. An analysis is presented of the structure of the liquid sheet at the end of the exit orifice, where the flow becomes critical in the sense that upstream propagation of long-wave perturbations ceases to be possible. This nalysis leads to a boundary condition at the end of the orifice that is an extension of the condition of maximum flux used with irrotational models of the flow. As is well known, the radial pressure gradient induced by the swirling flow in the bulk of the chamber causes the overpressure that drives the liquid towards the exit orifice, and also leads to Ekman pumping in the boundary layers of reduced azimuthal velocity at the convergent wall of the chamber and at the wall opposite to the exit orifice. The numerical results confirm the important role played by the boundary layers. They make the thickness of the liquid sheet at the end of the orifice larger than predicted by rrotational models, and at the same time tend to decrease the overpressure required to pass a given flow rate through the chamber, because the large axial velocity in the boundary layers takes care of part of the flow rate. The thickness of the boundary layers increases when the atomizer constant (the inverse of a swirl number, proportional to the flow rate scaled with the radius of the exit orifice and the circulation around the air core) decreases. A minimum value of this parameter is found below which the layer of reduced azimuthal velocity around the air core prevents the pressure from increasing and steadily driving the flow through the exit orifice. The effects of other parameters not accounted for by irrotational models are also analysed in terms of their influence on the boundary layers.

An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy

A numerical and experimental study of ballistic impacts at various temperatures on precipitation hardened Inconel 718 nickel-base superalloy plates has been performed. A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion has been implemented in LS-DYNA non-linear finite element code to model the mechanical behaviour of such an alloy. The ballistic impact tests have been carried out at three temperatures: room temperature (25 °C), 400 °C and 700 °C. The numerical study showed that the mesh size is crucial to predict correctly the shear bands detected in the tested plates. Moreover, the mesh size convergence has been achieved for element sizes on the same order that the shear bands. The residual velocity as well as the ballistic limit prediction has been considered excellent for high temperature ballistic tests. Nevertheless, the model has been less accurate for the numerical simulations performed at room temperature, being though in reasonable agreement with the experimental data. Additionally, the influence that the Lode angle had on quasi-static failure patterns such as cup-cone and slanted failure has been studied numerically. The study has revealed that the combined action of weakened constitutive equations and Lode angle dependent failure criterion has been necessary to predict the previously-mentioned failure patterns

Fast ignition driven by quasi-monoenergetic ions: Optimal ion type and reduction of ignition energies with an ion beam array

Fast ignition of inertial fusion targets driven by quasi-monoenergetic ion beams is investigated by means of numerical simulations. Light and intermediate ions such as lithium, carbon, aluminum and vanadium have been considered. Simulations show that the minimum ignition energies of an ideal configuration of compressed Deuterium-Tritium are almost independent on the ion atomic number. However, they are obtained for increasing ion energies, which scale, approximately, as Z2, where Z is the ion atomic number. Assuming that the ion beam can be focused into 10 ?m spots, a new irradiation scheme is proposed to reduce the ignition energies. The combination of intermediate Z ions, such as 5.5 GeV vanadium, and the new irradiation scheme allows a reduction of the number of ions required for ignition by, roughly, three orders of magnitude when compared with the standard proton fast ignition scheme.

Estudio del estado de la vegetación de ribera en la España peninsular. Implicaciones de la alteración hidrológica y herramientas para su manejo y gestión

El objetivo general de este trabajo es explorar las potenciales interacciones entre la alteración hidrológica y el estado de la vegetación de ribera en diversas cuencas hidrográficas españolas. La mayor parte del área de estudio está dentro de la región Mediterránea, una región caracterizada por un particular comportamiento climatológico, ecológico y socio-económico. Las cuencas estudiadas son: Guadiana, Guadalquivir, Tajo, y Duero. Para complementar el estudio y comparar resultados con otras regiones climáticas españolas se estudiaron dos Demarcaciones atlánticas: Cantábrico y Miño-Sil. El funcionamiento fluvial, en las áreas mediterráneas, presenta grandes variaciones en el régimen hídrico, siendo uno de los principales controladores de la estructura, composición y distribución de la vegetación de ribera. Para investigar las interacciones mencionadas previamente, se presenta un nuevo índice, Riparian Forest Evaluation (RFV). El objetivo de este índice es valorar el estado de la vegetación de ribera en base a los principales controladores hidro-morfológicos responsables de la dinámica fluvial, y por tanto, relacionados con el desarrollo del corredor ribereño. RFV divide la evaluación del bosque de ribera en cuatro componentes: continuidad longitudinal, transversal, y vertical (dimensiones espaciales), y condiciones del regenerado (dimensión temporal). La clasificación final está basada en las mismas cinco clases fijadas por la Directiva europea Marco del Agua (DMA) (2000/60/CE) para valorar el estado ecológico de las masas de agua. La aplicación de este índice en 187 masas de agua ha mostrado su facilidad de aplicación y su consistencia desde un punto de vista legislativo y técnicocientífico. En paralelo al diseño del índice RFV, se ha desarrollado una nueva herramienta para dar apoyo a la evaluación del bosque de ribera (RFV) y la extracción de variables hidromorfológicas a escala de masa de agua en lugar de a escala local (muestreo de campo local). Se trata de Riparian Characterisation by LiDAR (RiC-DAR), que permite valorar el estado del bosque de ribera de una manera semiautomática, en un modo cuasi-continuo, usando LiDAR de alta resolución. Esto hecho permite mejorar significativamente la calidad y cantidad de información comparado con la toma de datos en campo, lo que permite reducir los recursos, particularmente cuando se trabaja a escala de masas de agua. Una de las potenciales causas de la degradación del bosque de ribera es la alteración hidrológica; así una vez se ha realizado la evaluación del bosque de ribera basada en elementos hidro-morfológicos ligados al régimen hídrico (RFV), se han identificado las potenciales relaciones entre la alteración hidrológica y la degradación de la vegetación riparia. Para ello, se requiere contar con series de aforos fiables y de una duración apropiada. Para satisfacer este requerimiento, se ha creado una nueva herramienta: el Servidor de Datos para el Estudio de la Alteración Hidrológica (SEDAH). Esta herramienta genera datos diarios y mensuales completados para más años, construyendo así bases de datos más aptas para el estudio de la alteración hidrológica. (http://ambiental.cedex.es/Sedah) Haciendo uso de las herramientas y métodos desarrollados previamente, se han calculado diferentes indicadores de alteración hidrológica en 87 masas de agua que han sido analizados conjuntamente con el estado de la vegetación de ribera. Los resultados estadísticos han mostrado relaciones significativas entre ellos: la degradación de la vegetación podría estar fuertemente ligada a la alteración del régimen hídrico en años secos y a las sequías en el entorno mediterráneo. A su vez se ha analizado la relación del estado del bosque de ribera con el estado ecológico basado en la DMA, mostrando una relación no significativa. Esta y otras potenciales relaciones son discutidas a lo largo del documento. Los resultados permiten proponer recomendaciones de gestión de la vegetación de ribera y de manejo del régimen de caudales para masas de agua reguladas. ABSTRACT The general objective of this work is to explore the potential interactions between hydrologic alteration and degradation of the riparian vegetation, mainly focused in the Mediterranean Environment. The majority of the study area is part of the Spanish Mediterranean region, a geographical environment characterized by a singular climatologic, ecological and socio-economical behavior. The basins analysed in this work are: Guadiana, Guadalquivir, Tagus, Douro. In order to complete the results and compare those to other climatic regions in Spain, two Atlantic Districts where selected: Cantábrico and Miño-Sil. The river functioning, in the Mediterranean areas, presents great variations in the flow regimes being one of the main drivers of the riparian vegetation development. To explore the interactions stated above, a new index is presented, Riparian Forest Evaluation (RFV). This index is aimed to assess the status of the riparian vegetation based on the main hydromorphological drivers responsible of the river dynamic, and so, related to the development of the riparian corridor. RFV split the evaluation of the riparian forest into four components: longitudinal continuity, transversal continuity, vertical (structure) continuity and regeneration (temporal) continuity. The final classification is based in the same five classes to those stated in the European Water Frame Work directive to assess the ecological status. The application of this index over 187 water bodies has shown to be easily applicable and consistent from a regulatory perspective. In parallel to the design of RFV, a new tool has been developed to enhance the evaluation of the riparian forest and river morphology (RFV and morphological parameters) at water body scale rather than at local scale, i.e. when field surveyed at different sites. The Riparian Characterisation by LiDAR, RiC-DAR allows to assess the status of the riparian vegetation semi-automatically in a quasi-continuous way using high resolution LiDAR. This improves significantly the quantity and quality of information gathered through field sampling methods, reducing resources when working at larger scales. One of the potential major causes of degradation of the riparian forest is the hydrologic alteration; hence, once the evaluation of the riparian forest is done consistently based on hydro-morphological features linked to the hydrological regime (RVF), this work has identified potential relationships between hydrologic alteration and degradation of riparian vegetation. In order to do this, it is required to count with reliable series of flow records describing both reference and altered regimes. To satisfy this need, a new tool has been created, SEDAH, data server for assessing hydrologic alteration. This tool has completed daily and monthly gaps in the flow series to build up an improved database to assess the hydrologic alteration. This application is available on line (http://ambiental.cedex.es). Making use of the tools and methods developed previously, this work uses these data to work out indicators of hydrologic alteration through 87 water bodies to be analysed against the riparian status. These indicators are statistically analysed exploring significant relationships with the status of riparian vegetation and ecological status, showing some potential significant relationships; hence it seems that the degradation of riparian vegetation, particularly the regeneration, is associated with the alteration of the hydrologic regimen in dry years and draughts in Mediterranean environments. Furthermore, the analysis of the status of the ecological status and the status of the riparian vegetation has shown the lack of significant influence of the riparian vegetation in the final ecological status using the WFD approach applied in Spain. This and other potential relationships are discussed in this work. The results allow giving guidance on the management of both riparian vegetation and environmental flows of water bodies affected by flow regulation.

Quasi-a priori truncation error estimation in the DGSEM

In this paper we show how to accurately perform a quasi-a priori estimation of the truncation error of steady-state solutions computed by a discontinuous Galerkin spectral element method. We estimate the spatial truncation error using the ?-estimation procedure. While most works in the literature rely on fully time-converged solutions on grids with different spacing to perform the estimation, we use non time-converged solutions on one grid with different polynomial orders. The quasi-a priori approach estimates the error while the residual of the time-iterative method is not negligible. Furthermore, the method permits one to decouple the surface and the volume contributions of the truncation error, and provides information about the anisotropy of the solution as well as its rate of convergence in polynomial order. First, we focus on the analysis of one dimensional scalar conservation laws to examine the accuracy of the estimate. Then, we extend the analysis to two dimensional problems. We demonstrate that this quasi-a priori approach yields a spectrally accurate estimate of the truncation error.