Biokerosene from Babassu and Camelina Oils: production and properties of their blends with fossil kerosene

Babassu and camelina oils have been transesterified with methanol by the classical homogeneous basic catalysis method with good yields. The babassu fatty acid methyl ester (FAME) has been subjected to fractional distillation at vacuum, and the low boiling point fraction has been blended with two types of fossil kerosene, a straight-run atmospheric distillation cut (hydrotreated) and a commercial Jet-A1. The camelina FAME has been blended with the fossil kerosene without previous distillation. The blends of babassu biokerosene and Jet-A1 have met some of the specifications selected for study of the ASTM D1655 standard: smoke point, density, flash point, cloud point, kinematic viscosity, oxidative stability and lower heating value. On the other hand, the blends of babassu biokerosene and atmospheric distillation cut only have met the density parameter and the oxidative stability. The blends of camelina FAME and atmospheric distillation cut have met the following specifications: density, kinematic viscosity at −20 °C, and lower heating value. With these preliminary results, it can be concluded that it would be feasible to blend babassu and camelina biokerosenes prepared in this way with commercial Jet-A1 up to 10 vol % of the former, if these blends prove to accomplish all the ASTM D1655-09 standards.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

New data on the Pleistocene of Trani (Adriatic Coast, Southern Italy)

Along the Apulian Adriatic coast, in a cliff south of Trani, a succession of three units (superimposed on one another) of marine and/or paralic environments has been recognised. The lowest unit I is characterised by calcareous/siliciclastic sands (css), micritic limestones (ml), stromatolitic and characean boundstones (scb), characean calcarenites (cc). The sedimentary environment merges from shallow marine, with low energy and temporary episodes of subaerial exposure, to lagoonal with a few exchanges with the sea. The lagoonal stromatolites (scb subunit) grew during a long period of relative stability of a high sea level in tropical climate. The unit I is truncated at the top by an erosion surface on which the unit II overlies; this consists of a basal pebble lag (bpl), silicicla - stic sands (ss), calcareous sands (cs), characean boundstones (cb), brown paleosol (bp). The sedimentary environment varies from beach to lagoon with salinity variations. Although there are indications of seismic events within the subunits cs, unit II deposition took place in a context of relative stability. The unit II is referable to a sea level highstand. Unit III, trangressive on the preceding, consists of white calcareous sands (wcs), calcareous sands and calcarenites (csc), phytoclastic calcirudite and phytohermal travertine (pcpt), mixed deposits (csl, m, k, c), sands (s) and red/brown paleosols (rbp). The sedimentation of this unit was affected by synsedimentary tectonic, attested by seismites found at several heights. Also the unit III is referable to a sea level highstand. The scientific literature has so far generally attributed to the Tyrrhenian (auct.) the deposits of Trani cliff. As part of this work some datings were performed on 10 samples, using the amino acid racemization method (AAR) applied to ostracod carapaces. Four of these samples have been rejected because they have shown in laboratory recent contamination. The numerical ages indicate that the deposits of the Trani cliff are older than MIS 5. The upper part of the unit I has been dated to 355±85 ka BP, thus allowing to assign the lowest stromatolitic subunit (scb) at the MIS 11 peak and the top of the unit I at the MIS 11-MIS 10 interval. The base of the unit II has been dated to 333±118 ka BP, thus attributing the erosion surface that bounds the units I and II to the MIS 10 lowstand and the lower part of the unit II to MIS 9.3. The upper part of the unit II has been dated to 234±35 ka BP, while three other numerical ages come from unit III: 303±35, 267±51, 247±61 ka BP. At present, the numerical ages cannot distinguish the sedimentation ages of units II and III, which are both related to the MIS 9.3- MIS 7.1 time range. However, the position of the units, superimposed one another, and their respective age, allows us to recognise a subsidence phase between MIS 11 and MIS 7, followed by an uplift phase between the MIS 7 and the present day, which led the deposits in their current position. This tectonic pattern is not in full agreement with what is described in the literature for the Apulian foreland.

Modelling and forecasting fossil fuels, CO2 and electricity prices and their volatilities

In the current uncertain context that affects both the world economy and the energy sector, with the rapid increase in the prices of oil and gas and the very unstable political situation that affects some of the largest raw materials’ producers, there is a need for developing efficient and powerful quantitative tools that allow to model and forecast fossil fuel prices, CO2 emission allowances prices as well as electricity prices. This will improve decision making for all the agents involved in energy issues. Although there are papers focused on modelling fossil fuel prices, CO2 prices and electricity prices, the literature is scarce on attempts to consider all of them together. This paper focuses on both building a multivariate model for the aforementioned prices and comparing its results with those of univariate ones, in terms of prediction accuracy (univariate and multivariate models are compared for a large span of days, all in the first 4 months in 2011) as well as extracting common features in the volatilities of the prices of all these relevant magnitudes. The common features in volatility are extracted by means of a conditionally heteroskedastic dynamic factor model which allows to solve the curse of dimensionality problem that commonly arises when estimating multivariate GARCH models. Additionally, the common volatility factors obtained are useful for improving the forecasting intervals and have a nice economical interpretation. Besides, the results obtained and methodology proposed can be useful as a starting point for risk management or portfolio optimization under uncertainty in the current context of energy markets.

Vegetal preservation in the “Lo Hueco” fossil site (Cuenca, Spain)

Preservación Vegetal en el yacimiento Lo Hueco (Cuenca, España)

Airplane materials compatibility with blends of fossil kerosene JET A1 with biokerosenes from babassu, palm kernel and coconut oils

The aviation companies are facing some problems that argue in favor of biofuels: Rising cost of traditional fuel: from 0.71 USD/gallon in May 2003 to 3.09 USD/gallon in January 2012. Environmental concerns: direct emissions from aviation account for about 3 % of the EU’s total greenhouse gas emissions. The International Civil Aviation Organization (ICAO) forecasts that by 2050 they could grow by a further 300-700 %. On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights (European Union Emissions Trading System, EUETS)

Blends of babassu, palm kernal and coconut mame with fossil kerosene: low carbon number methyl esters as a possible source for renewable jet fuel

Three different oils: babassu, coconut and palm kernel have been transesterified with methanol. The fatty acid methyl esters (FAME) have been subjected to vacuum fractional distillation, and the low boiling point fractions have been blended with fossil kerosene at three different proportions: 5, 10 and 20% vol.

Blends of babassu, palm kernel and coconut fame with fossil kerosene. Technical aspects of low carbon number methyl esters as a possible source for renewable jet fuel

State of the Art. Process and Distillation. Fuel Characterization. Fuel Compatibility Tests

Tracing environmental and cultural changes throughout the Gran Dolina TD10 Middle Pleistocene sequence (Atapuerca, Burgos, Spain)

The well-known eponym El Sidrón has a very special history. It started with the development of a karstic system between two types of rock (sandstone and Neogene conglomerates) as a result of the flow of a small stream. It continued with the use of the cave as a refuge and a hiding place during the Spanish Civil War and the aftermath and with the presence of some endemic species of bats and cave insects

Airplane materials compatibility with blends of fossil kerosene jet a1 with biokerosenes from babassu, palm kernel and coconut oils

El desarrollo de bioqueroseno de diferentes orígenes y su uso creciente, hacen necesario el estudio de la compatibilidad estos nuevos combustibles con los materiales y recubrimientos con los que se encuentra en contacto. Por tanto, el presente proyecto estudia la compatibilidad de los bioquerosenos mezclados en diferentes proporciones con queroseno mineral, para evaluar posteriormente su compatibilidad con diferentes polímeros y composites presentes en la estructura de un avión.Currently there is a big interest to increase the sources of alternative fuels for aviation to get a reduction of their carbon footprint and the deep energetic dependence from fossil fuels of different countries. Although there are studies about how to produce this alternative fuel and how to accomplish the standards for a good performance in the aircraft turbines, there are no studies about how these fuels could affect the different materials of airplanes. In this context this work describes the compatibility of biokerosene blends of coconut, babassu and palm kernel with commercial Jet A-1 testing airplane polymeric materials, metals and composites. As a conclusion, all material samples show a good compatibility with the fuel blends tested.

Nuances matter: How fossil woody remains changed the interpretation of the vegetation in Iberia

Ejemplos de cómo los macrorrestos ayudan a mejorar la interpretación del paisaje vegetal de la península Ibérica

Holocene fossil woods from the Caldera de Taburiente National Park (Canary Islands, Spain)

The study of 39 Pinus canariensis Holocene fossil woods from the Caldera de Taburiente is presented

Environmental analysis of a Concentrated Solar Power (CSP) plant hybridised with different fossil and renewable fuels

The environmental performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant hybridised with different fuels was determined using a Life Cycle Assessment methodology. Six different scenarios were investigated, half of which involved hybridisation with fossil fuels (natural gas, coal and fuel oil), and the other three involved hybridisation with renewable fuels (wheat straw, wood pellets and biogas). Each scenario was compared to a solar-only operation. Nine different environmental categories as well as the Cumulative Energy Demand and the Energy Payback Time (EPT) were evaluated using Simapro software for 1 MWh of electricity produced. The results indicate a worse environmental performance for a CSP plant producing 12% of the electricity from fuel than in a solar-only operation for every indicator, except for the eutrophication and toxicity categories, whose results for the natural gas scenario are slightly better. In the climate change category, the results ranged between 26.9 and 187 kg CO2 eq/MWh, where a solar-only operation had the best results and coal hybridisation had the worst. Considering a weighted single score indicator, the environmental impact of the renewable fuels scenarios is approximately half of those considered in fossil fuels, with the straw scenario showing the best results, and the coal scenario the worstones. EPT for solar-only mode is 1.44 years, while hybridisation scenarios EPT vary in a range of 1.72 -1.83 years for straw and pellets respectively. The fuels with more embodied energy are biomethane and wood pellets.

Evolución de la vegetación en el sector biogeográfico Castellano Cantábrico durante el Cuaternario Final, a través del registro tobáceo

En esta memoria de Tesis Doctoral se aborda el estudio paleobotánico de seis yacimientos tobáceos situados en las localidades burgalesas de Tubilla del Agua, Sedano, Herrán, Tobera y Frías, y en la alavesa de Ocio. El registro fósil encontrado en estos afloramientos se analiza de forma conjunta con el objetivo de conocer la evolución de la vegetación en el sector biogeográfico Castellano Cantábrico. Este sector se considera el territorio para el cual los hallazgos paleobotánicos son representativos y extrapolables, en tanto que constituye una región homogénea desde el punto de vista florístico, que abarca todos los yacimientos prospectados. El contexto temporal en el que se enmarca este estudio es el final del Cuaternario, desde el Pleistoceno Medio hasta la actualidad. Este intervalo se ha establecido a partir de la edad de los depósitos estudiados, la cual ha sido determinada —para los yacimientos de los que no se disponía de edades fiables— mediante la datación de muestras extraídas de las diferentes unidades litológicas identificadas. Para ello han sido empleadas las técnicas de carbono-14, desequilibrio de las series del uranio y racemización de aminoácidos. Los resultados geocronológicos obtenidos junto con el análisis geomorfológico de los yacimientos han permitido vincular la génesis de las 13 unidades litológicas identificadas con diferentes estadíos climáticos. Estos abarcan un amplio rango de condiciones ambientales, desde las más extremas del Último Máximo Glacial, hasta las más benignas de los Estadíos Isotópicos Marinos interglaciares 1 y 5. Como resultado de la prospección de los depósitos de toba fueron recuperados 1.820 fósiles, la mayoría impresiones foliares, pero también moldes de estróbilos femeninos, ramas y corteza, así como 42 carbones y restos subfósiles de Pinus sp. La identificación taxonómica de estos restos se ha realizado fundamentalmente a partir del análisis de caracteres diagnósticos morfológicos. Como resultado de ello, han sido descritos 28 taxones pertenecientes a las subclases Bryidae, Polypodiidae, Pinidae y Magnoliidae. La flora de los yacimientos estudiados se puede clasificar en tres grupos en función de sus requerimientos ecológicos: (i) uno formado por dos especies de alta tolerancia a la continentalidad —Pinus nigra y Quercus faginea—, las cuales aparecen bien representadas en la mayoría de los depósitos; (ii) otro constituido fundamentalmente por un conjunto de árboles y arbustos que habitualmente tienen el papel de especies acompañantes en los bosques ibéricos submediterráneos y eurosiberianos; y (iii) un tercer grupo compuesto por taxones hidrófitos o edafohigrófilos asociados al ecosistema del fitohermo activo y la vegetación de ribera. En el capítulo de Discusión se propone y analiza la hipótesis de que P. nigra y Q. faginea habrían sido las especies protagonistas de la vegetación zonal del sector Castellano Cantábrico durante el Cuaternario Final. Estas podrían haber persistido como tal incluso durante las épocas más frías, debido a su amplia valencia ecológica y a la capacidad de reproducirse vegetativamente en el caso del quejigo. Por el contrario, los taxones mesofíticos y eurosiberianos pudieron haber sufrido la expansión y retracción de sus poblaciones al ritmo de las oscilaciones climáticas. Sin embargo, la orografía diversa del sector Castellano Cantábrico proporciona emplazamientos en los que se combinan las diversas variables fisiográficas, de tal forma que pudieron haber existido microrrefugios en los que encontraron cobijo algunos taxones mesotérmicos y eurosiberianos durante los periodos glaciales. Por último, la historia evolutiva reciente de la vegetación de este territorio ha estado marcada por la acción antrópica, la cual empezó a ser manifiesta a partir del Neolítico. Esta se tradujo en la degradación y reducción de la cubierta forestal, así como en la extinción del pino laricio del Sector Castellano Cantábrico en los dos últimos milenios. ABSTRACT This PhD Dissertation focuses in the study of six tufa formations located nearby the villages of Tubilla del Agua, Sedano, Herrán, Tobera y Frías, all of them in the province of Burgos, and Ocio, which belongs to the province of Álava. We analyze the palaeobotanical archives of these sites with the purpose of unveiling and understanding the evolution of the vegetation of the Castilian Cantabrian biogeographical sector. This area is considered to be the territory that is represented in the palaeobotanical sample of the studied tufa archives. It is the homogeneous phitogeographical area with the lowest rank that include all the sites. The time frame of this study is the last part of the Quaternary, since the Middle Pleistocene to the present time. This interval is defined by the age of the tufa deposits, which were dated —for the ones that there were not available datings— throughout the analysis of 20 tufa samples taken from the 13 identified lithostratigraphic units. The age of the samples has been determined by using the methods of radiocarbon, U-Th dating and amino acid racemization. Chronological results, along with the chronostratigraphic study of the sites has allowed us to relate the build-up of the 13 identified lithostratigraphic units with different climatic stages. These structures were deposited in a wide range of climatic conditions, from the most extreme ones of the Last Glacial Maximum, to the warmer ones of the Marine Isotopic Stages 1 and 5. A total of 1,820 fossils were recovered from the tufa deposits, most of them were leaf impressions, but also pine cones, branches and bark moulds, along with charcoal and Pinus nigra macro remains. The taxonomical identification of these remains has been done mainly through the analysis of morphological traits. As a result of this process, 28 taxa belonging to the subclass of Bryidae, Polypodiidae, Pinidae and Magnoliidae were identified. The persistency of some taxa can be traced along different climatic stages in this fossil record. This fossil flora can be classified in three different groups: (i) the first one would be composed of two species with high continental climate tolerance —Pinus nigra y Quercus faginea—, which can be found in most of the deposits, (ii) the second group would be mostly formed by trees and shrubs that usually grow in the Iberian forests as an accessory species and (iii) the third one is composed of hydrophytes or hydrophilic taxa associate to the streams, riparian zones or the active tufa ecosystem. In the Discussion chapter we propose and analyse the hypothesis that P.nigra and Q. faginea were the main species of the zonal vegetation of the Castilian Cantabrian biogeographical sector during the last part of the Quaternary. This species could have persisted due to their wide ecological amplitude and also due to the capacity of asexual reproduction in the cases of the oak. On the other hand, mesophitic taxa could have suffered the retraction and expansion of their population following the climate oscillations. However, the diverse orography of the Castilian Cantabrian biogeographical sector provides a variety of combinations of physiographic variables, which could have been suitable refuges for some of the mesophitic taxa. The recent evolutionary history of the vegetation in this territory has been affected by human activities, which started to be relevant since the Neolithic. This led to a reduction of the forests and eventually, to the extinction of P. nigra in the Castilian Cantabrian biogeographical sector in the last two thousands of years.