Bicarbonato ingestion has no ergogenic effect on consecutive all out sprint test in MWX elite cyclists

The aim of the present study was to examine the effect of sodium bicarbonate ingestion on consecutive "all out" sprint tests, analyzing the acid-base status and its influence on performance and perceived effort. Ten elite bicycle motocross (BMX) riders (20.7 ± 1.4 years, training experience 8-12 years) participated in this study which consisted of two trials. Each trial consisted of three consecutive Wingate tests (WTs) separated by 15 min recovery. Ninety minutes prior to exercise subjects ingested either NaHCO(3) (-) (0.3 g kg(-1) body weight) or placebo. Blood samples were collected for the assessment of blood acid-base status: bicarbonate concentration ([HCO(3) (-)]), pH, base excess (BE) and blood lactate concentration ([La(-)]). Performance variables of peak power (PP), mean power (MP), time to peak power and fatigue index were calculated for each sprint. Significant differences (p < 0.05) were observed in acid-base variables [pH before WT1: 7.47 ± 0.05 vs. 7.41 ± 0.03; [HCO(3) (-)] before WT1: 29.08 ± 2.27 vs. 22.85 ± 0.24 mmol L(-1) (bicarbonate vs. placebo conditions, respectively)], but there were not significant differences in performance variables between trials [PP WT1: 1,610 ± 373 vs. 1,599 ± 370 W; PP WT2: 1,548 ± 460 vs. 1,570 ± 428 W; PP WT3: 1,463 ± 361 vs. 1,519 ± 364 W. MP WT1: 809 ± 113 vs. 812 ± 108 W; MP WT2: 799 ± 135 vs. 799 ± 124 W; MP WT3: 762 ± 165 vs. 782 ± 118 W (bicarbonate vs. placebo conditions, respectively)]. Rating of perceived effort (RPE) was not influenced nor ratings of perceived readiness. Sodium bicarbonate ingestion modified significantly the blood acid-base balance, although the induced alkalosis did not improve the Wingate test performance, RPE and perceived readiness across three consecutive WTs in elite BMX cyclists.

Estimating Perceived Video Quality from Objective Parameters in Video over IP Services

In Video over IP services, perceived video quality heavily depends on parameters such as video coding and network Quality of Service. This paper proposes a model for the estimation of perceived video quality in video streaming and broadcasting services that combines the aforementioned parameters with other that depend mainly on the information contents of the video sequences. These fitting parameters are derived from the Spatial and Temporal Information contents of the sequences. This model does not require reference to the original video sequence so it can be used for online, real-time monitoring of perceived video quality in Video over IP services. Furthermore, this paper proposes a measurement workbench designed to acquire both training data for model fitting and test data for model validation. Preliminary results show good correlation between measured and predicted values.

Estimation of Perceived Quality in Convergent Services

Triple-Play (3P) and Quadruple-Play (4P) services are being widely offered by telecommunication services providers. Such services must be able to offer equal or higher quality levels than those obtained with traditional systems, especially for the most demanding services such as broadcast IPTV. This paper presents a matrix-based model, defined in terms of service components, user perceptions, agent capabilities, performance indicators and evaluation functions, which allows to estimate the overall quality of a set of convergent services, as perceived by the users, from a set of performance and/or Quality of Service (QoS) parameters of the convergent IP transport network

Perceived Video Quality Estimation from Spatial and Temporal Information Contents and Network Performance Parameters in IPTV

The paper proposes a model for estimation of perceived video quality in IPTV, taking as input both video coding and network Quality of Service parameters. It includes some fitting parameters that depend mainly on the information contents of the video sequences. A method to derive them from the Spatial and Temporal Information contents of the sequences is proposed. The model may be used for near real-time monitoring of IPTV video quality.

Problemática estructural y de funcionamiento de la cadena de valor del jamón ibérico de bellota: el caso de Guijuelo en España

El sector porcino ibérico es un sector típicamente español. La imagen que asocia el consumidor a los productos ibéricos es la correspondiente a los productos elaborados a partir de cerdos ibéricos en explotaciones extensivas, (dehesas), y cebados en montanera. Sin embargo, según los datos publicados por el Ministerio de Agricultura, Alimentación y Medio Ambiente, más de un 70 por ciento de los cerdos ibéricos que se producen en España son criados en granjas intensivas. El sector porcino ibérico está en pleno proceso de cambio, tanto por las variaciones que se derivan de la crisis que sufre el sector, como por las modificaciones que se esperan en la norma de calidad, recientemente acordadas. En este entorno en el que existe una reducción importante de los márgenes comerciales en todos los eslabones de la cadena de valor del jamón ibérico de bellota, adquiere importancia el estudio de su estructura y funcionamiento, la determinación de los aspectos que mejoran la eficiencia económica a lo largo de la misma y su concordancia a lo largo de ella. Así mismo, un sector de los consumidores comienza a buscar productos de calidad, se interesa por productos con determinados etiquetados que garantizan la calidad o unas determinadas prácticas de producción y elaboración, como sucede con los productos ecológicos. Existen numerosos estudios sobre distintos aspectos del sector porcino ibérico, realizados por distintas instituciones, como universidades, instituciones privadas y proyectos europeos. En general, se centran en la mejora de la producción de los cerdos ibéricos o en la mejora de la elaboración de los jamones. La novedad de la investigación realizada en la presente Tesis Doctoral reside en el estudio de los aspectos que determinan la mayor eficiencia económica de la cadena de valor del jamón ibérico de bellota de la denominación de origen de Guijuelo, y en las características que aporta al jamón ibérico de bellota la producción ecológica frente a la convencional. Resumen Los objetivos planteados en esta investigación son la mejora de la cadena de valor del jamón ibérico de bellota de la denominación de origen de Guijuelo, mediante el estudio de la problemática estructural y de funcionamiento de la misma. Como objetivos específicos se proponen la mejora de la eficiencia económica en las relaciones comerciales entre los distintos eslabones de la cadena de valor, y el impulso de la oferta de los productos ecológicos de ibérico, mediante el estudio comparativo de las producciones convencionales y ecológicas. Para alcanzar estos objetivos la metodología utilizada es la cadena de valor agroalimentaria, utilizando como herramientas de análisis el método Delphi y la realización de un análisis DAFO del sector porcino ibérico. Las fuentes de información primarias utilizadas proceden por una parte de la colaboración realizada en el proyecto europeo Q-Porkchains, coordinado por el Dr. Jacques H. Trienekens, y por otra parte de los cuestionarios especialmente diseñados para el análisis Delphi realizado. Las fuentes de información secundarias proceden de artículos académicos publicados, de artículos de revistas especializadas en el sector y de informes y estadísticas publicados por el Ministerio de Agricultura, Alimentación y Medio Ambiente. Las conclusiones de la investigación son las siguientes. Las relaciones comerciales de la cadena de valor estudiada están gestionadas, ya que se otorga gran valor a las relaciones comerciales basadas en la confianza, tanto en el aprovisionamiento de productos como en la venta de los mismos en cada eslabón. Sin embargo, no se gestiona adecuadamente la gama de productos que se oferta a lo largo de la cadena de valor, puesto que los eslabones de la misma obtienen diferente eficiencia económica para el mismo producto. Por otra parte, aunque la denominación de origen de Guijuelo es una marca conocida por el consumidor, el esfuerzo por tener una marca colectiva de calidad no ha sido totalmente satisfactorio, en especial para el eslabón de la distribución. Por esta razón, es importante resaltar que es recomendable la creación de una marca propia que cuide la calidad con especial atención, modificando incluso las empresas integrantes de la cadena de valor si el objetivo de calidad no coincide. Es importante garantizar la calidad del producto al consumidor, mediante la trasmisión la información generada por los informes de inspección y certificación realizados por las entidades correspondientes en relación a la norma de calidad de los productos de cerdo ibérico y por el Consejo Regulador de Guijuelo. Se requiere un estudio detallado de los posibles nichos de mercado para llegar a los clientes que buscan un producto de calidad diferenciada como es el jamón ibérico de denominación de origen de Guijuelo. Dentro de los posibles clientes debe tenerse en consideración al colectivo de personas alérgicas, ya que no se encuentran con facilidad en el mercado productos cárnicos de cerdo libres de alérgenos. Por último, la innovación es muy importante en este sector, y pueden ofertarse nuevos productos que ayuden al acortamiento de la cadena de valor, como podría ser la carne fresca de cerdo ibérico de bellota. La producción ecológica de porcino ibérico, en la actualidad no es significativa. El manejo que se realiza de los cerdos ibéricos convencionales de bellota es muy similar al manejo que se realiza de los cerdos ecológicos, salvo en la alimentación que reciben los cerdos ibéricos antes del cebo en montanera y en los medicamentos permitidos en ambas producciones. La producción de porcino ecológico de bellota puede ser interesante para la exportación. Los jamones ibéricos de bellota dispondrían de un sello que garantiza un manejo tradicional –como se realiza en muchas explotaciones extensivas de cerdos ibéricos de bellota-, y que es apreciado por los consumidores de otros países, dispuestos a pagar por productos de calidad diferenciada. Este tipo de producción quizá podría solventar la limitación al ámbito nacional de la norma de calidad de los productos de cerdo ibérico. La falta de claridad y unanimidad en el sector sobre la calidad de los productos de ibéricos que se percibe en los cambios previstos en la legislación, y el interés del eslabón de la industria elaboradora de jamones en calidades no ligadas a producciones extensivas sino intensivas, por su mayor volumen de ventas y sus mejores rendimientos, mueven a los productores de “ibérico puro de bellota” a desmarcarse del sector “ibérico”, donde el peso del producto ibérico cruzado de pienso tiene mucho peso en las decisiones que se toman. The Iberian pork industry is a typically Spanish industry. The associated image by the consumer to these products corresponds to products made from Iberian pigs in extensive farms (meadows), and fattened in open range. However, according to data released by the Ministry of Agriculture, Food and Environment, more than 70 percent of the Iberian pigs produced in Spain are raised on factory farms. The Iberian pork industry is in process of change, both by modifications resulting from the crisis in the sector, and the expected ones in the quality standard, recently agreed. In this environment where there is a significant reduction in trade margins in all links of the value chain of Iberian ham, becomes important to study its structure and operation, identifying the aspects that improve economic efficiency along the value chain and their concordance along it. Likewise, part of the consumers begins searching for quality products, they are interested in certain products that guarantee some sort of quality or production and processing practices, like organic products. There are several studies on various aspects of the Iberian pork industry, made by different institutions, such as universities, private institutions and some European projects. In general, their goal is focused on improving the Iberian hog production or on improving the elaboration of hams. The novelty of the research conducted in this PhD thesis lies in the study of the aspects that determine the economic efficiency of the value chain of Iberian ham from Guijuelo designation of origin, and the comparison between the features that organic or conventional production of Iberian ham brings to it. The objectives propound in this research are the improvement of the value chain of Iberian ham from Guijuelo designation of origin, through the study of its structural and operational problematic. The proposed specific objectives are the improvement of the economic efficiency Resumen in trade relations between the different links in the value chain, and the promotion of the supply of Iberian organic pork products, through the comparative study of conventional and organic productions. In order to achieve these objectives, the used methodology is the agrifood value chain, using as analysis tools the Delphi method, and a SWOT analysis of the Iberian pork industry. The primary sources of information come partly from the collaboration in the European project Q-Porkchains, coordinated by Dr. Jacques Trienekens, and partly from the questionnaires specially designed for the Delphi analysis performed. The secondary sources come from published academic papers, specialized journal articles and reports published by the Ministry of Agriculture, Food and Environment. The research conclusions are as follows. Trade relations in the studied value chain are managed, as it is granted a great value to business relationships based on trust, both in the supply of products and in the sale in each link. However, the portfolio that is offered throughout the value chain is not properly managed, since the economic efficiency obtained for the same product is different in each link. Moreover, although the designation of origin of Guijuelo is a well-known brand, the effort made to acquire a collective quality trademark has not been entirely satisfactory, especially in the distribution link. Due to it, it is important to highlight that it is recommended to create a brand focused on quality, and indeed to change the firms integrating the vale chain, if the goal is not shared by all the companies. It is essential to ensure the quality of the product to the consumer, through the transmission of the available information related to the quality standard of Iberian pork products and of the Guijuelo Regulating Council. A detailed study of potential niche markets is required, in order to reach customers looking for a differentiated quality product as Iberian ham of Guijuelo designation of origin. It should be taken into consideration the group of allergy sufferers as potential customers, as they do not easily find pork products in the market free of allergens. Innovation is very important in this industry, and new products could be commercialized that help to shorten the value chain, as fresh acorn Iberian pork. Nowadays, the organic production of Iberian pork products is not significant. The operation is very similar in both conventional and organic production of Iberian pork products, except in the food received by Iberian hogs and the sort of medicinal treatments allowed in each production. The organic acorn Iberian pork production could be interesting for export. Acorn Iberian hams would have a well-known hallmark, which guarantees a traditional production, -as it is done in many extensive holdings of Iberian acorn-pigs-, and that is appreciated by consumers in other countries This niche of consumers could pay for differentiated quality products. Perhaps, this sort of production could solve the limitation to national scope of the quality standard of Iberian pork products. The lack of clarity and unanimity in the industry on the quality of Iberian pork products has been perceived in the agreed changes of the legislation as well as the interest of the processing industry in hams of quality categories which are not linked to extensive but intensive productions, due to their higher sales volume and better yields. This situation pushed "acorn pure Iberian " pigs farmers to split from the Iberian industry, where the importance of cross Iberian pig from intensive farms is growing so high that they can influence the negotiations and decisions taken inside and outside the industry.

Perceived Health, Physical Activity and Sport among the Elderly of Spain

Purpose: It determines if participating in sports and/or physical activity influences perceived health among the elderly. Basic procedures: Data were drawn from a population subsample of subjects aged 65 - 79 years old that took part in a survey conducted in 2008 by the IESA-CSIC. A regression model was performed with perceived health status with the dependent variable and sociodemographic characteristics and physical activity as independent variables. Results: Physical activity is closely associated to per-ceived health, although sport has little influence on this relationship. Conclusions: Doing exercise or feeling that one is physically active makes the elderly feel better about their health status. However, this age group practises few sports and sport is not found to have an important or constant influence on self-perceived health status among the elderly.

1RM prediction: a data mining case study

In the last few years there has been a heightened interest in data treatment and analysis with the aim of discovering hidden knowledge and eliciting relationships and patterns within this data. Data mining techniques (also known as Knowledge Discovery in Databases) have been applied over a wide range of fields such as marketing, investment, fraud detection, manufacturing, telecommunications and health. In this study, well-known data mining techniques such as artificial neural networks (ANN), genetic programming (GP), forward selection linear regression (LR) and k-means clustering techniques, are proposed to the health and sports community in order to aid with resistance training prescription. Appropriate resistance training prescription is effective for developing fitness, health and for enhancing general quality of life. Resistance exercise intensity is commonly prescribed as a percent of the one repetition maximum. 1RM, dynamic muscular strength, one repetition maximum or one execution maximum, is operationally defined as the heaviest load that can be moved over a specific range of motion, one time and with correct performance. The safety of the 1RM assessment has been questioned as such an enormous effort may lead to muscular injury. Prediction equations could help to tackle the problem of predicting the 1RM from submaximal loads, in order to avoid or at least, reduce the associated risks. We built different models from data on 30 men who performed up to 5 sets to exhaustion at different percentages of the 1RM in the bench press action, until reaching their actual 1RM. Also, a comparison of different existing prediction equations is carried out. The LR model seems to outperform the ANN and GP models for the 1RM prediction in the range between 1 and 10 repetitions. At 75% of the 1RM some subjects (n = 5) could perform 13 repetitions with proper technique in the bench press action, whilst other subjects (n = 20) performed statistically significant (p < 0:05) more repetitions at 70% than at 75% of their actual 1RM in the bench press action. Rate of perceived exertion (RPE) seems not to be a good predictor for 1RM when all the sets are performed until exhaustion, as no significant differences (p < 0:05) were found in the RPE at 75%, 80% and 90% of the 1RM. Also, years of experience and weekly hours of strength training are better correlated to 1RM (p < 0:05) than body weight. O'Connor et al. 1RM prediction equation seems to arise from the data gathered and seems to be the most accurate 1RM prediction equation from those proposed in literature and used in this study. Epley's 1RM prediction equation is reproduced by means of data simulation from 1RM literature equations. Finally, future lines of research are proposed related to the problem of the 1RM prediction by means of genetic algorithms, neural networks and clustering techniques. RESUMEN En los últimos años ha habido un creciente interés en el tratamiento y análisis de datos con el propósito de descubrir relaciones, patrones y conocimiento oculto en los mismos. Las técnicas de data mining (también llamadas de \Descubrimiento de conocimiento en bases de datos\) se han aplicado consistentemente a lo gran de un gran espectro de áreas como el marketing, inversiones, detección de fraude, producción industrial, telecomunicaciones y salud. En este estudio, técnicas bien conocidas de data mining como las redes neuronales artificiales (ANN), programación genética (GP), regresión lineal con selección hacia adelante (LR) y la técnica de clustering k-means, se proponen a la comunidad del deporte y la salud con el objetivo de ayudar con la prescripción del entrenamiento de fuerza. Una apropiada prescripción de entrenamiento de fuerza es efectiva no solo para mejorar el estado de forma general, sino para mejorar la salud e incrementar la calidad de vida. La intensidad en un ejercicio de fuerza se prescribe generalmente como un porcentaje de la repetición máxima. 1RM, fuerza muscular dinámica, una repetición máxima o una ejecución máxima, se define operacionalmente como la carga máxima que puede ser movida en un rango de movimiento específico, una vez y con una técnica correcta. La seguridad de las pruebas de 1RM ha sido cuestionada debido a que el gran esfuerzo requerido para llevarlas a cabo puede derivar en serias lesiones musculares. Las ecuaciones predictivas pueden ayudar a atajar el problema de la predicción de la 1RM con cargas sub-máximas y son empleadas con el propósito de eliminar o al menos, reducir los riesgos asociados. En este estudio, se construyeron distintos modelos a partir de los datos recogidos de 30 hombres que realizaron hasta 5 series al fallo en el ejercicio press de banca a distintos porcentajes de la 1RM, hasta llegar a su 1RM real. También se muestra una comparación de algunas de las distintas ecuaciones de predicción propuestas con anterioridad. El modelo LR parece superar a los modelos ANN y GP para la predicción de la 1RM entre 1 y 10 repeticiones. Al 75% de la 1RM algunos sujetos (n = 5) pudieron realizar 13 repeticiones con una técnica apropiada en el ejercicio press de banca, mientras que otros (n = 20) realizaron significativamente (p < 0:05) más repeticiones al 70% que al 75% de su 1RM en el press de banca. El ínndice de esfuerzo percibido (RPE) parece no ser un buen predictor del 1RM cuando todas las series se realizan al fallo, puesto que no existen diferencias signifiativas (p < 0:05) en el RPE al 75%, 80% y el 90% de la 1RM. Además, los años de experiencia y las horas semanales dedicadas al entrenamiento de fuerza están más correlacionadas con la 1RM (p < 0:05) que el peso corporal. La ecuación de O'Connor et al. parece surgir de los datos recogidos y parece ser la ecuación de predicción de 1RM más precisa de aquellas propuestas en la literatura y empleadas en este estudio. La ecuación de predicción de la 1RM de Epley es reproducida mediante simulación de datos a partir de algunas ecuaciones de predicción de la 1RM propuestas con anterioridad. Finalmente, se proponen futuras líneas de investigación relacionadas con el problema de la predicción de la 1RM mediante algoritmos genéticos, redes neuronales y técnicas de clustering.

Fishing effort control regulations influence on stability, safety and operability of small fishing vessels: study of a series of stability related accidents occurred in Spain between 2004 and 2007

Entre los años 2004 y 2007 se hundieron por problemas de estabilidad cinco pesqueros españoles de pequeña eslora, de características parecidas, de relativamente poca edad, que habían sido construidos en un intervalo de pocos años. La mayoría de los tripulantes de esos pesqueros fallecieron o desaparecieron en esos accidentes. Este conjunto de accidentes tuvo bastante repercusión social y mediática. Entre ingenieros navales y marinos del sector de la pesca se relacionó estos accidentes con los condicionantes a los diseños de los pesqueros impuestos por la normativa de control de esfuerzo pesquero. Los accidentes fueron investigados y publicados sus correspondientes informes; en ellos no se exploró esta supuesta relación. Esta tesis pretende investigar la relación entre esos accidentes y los cambios de la normativa de esfuerzo pesquero. En la introducción se expone la normativa de control de esfuerzo pesquero analizada, se presentan datos sobre la estructura de la flota pesquera en España y su accidentalidad, y se detallan los criterios de estabilidad manejados durante el trabajo, explicando su relación con la seguridad de los pesqueros. Seguidamente se realiza un análisis estadístico de la siniestralidad en el sector de la pesca para establecer si el conjunto de accidentes estudiados supone una anomalía, o si por el contrario el conjunto de estos accidentes no es relevante desde el punto de vista estadístico. Se analiza la siniestralidad a partir de diversas bases de datos de buques pesqueros en España y se concluye que el conjunto de accidentes estudiados supone una anomalía estadística, ya que la probabilidad de ocurrencia de los cinco sucesos es muy baja considerando la frecuencia estimada de pérdidas de buques por estabilidad en el subsector de la flota pesquera en el que se encuadran los cinco buques perdidos. A continuación el trabajo se centra en la comparación de los buques accidentados con los buques pesqueros dados de baja para construir aquellos, según exige la normativa de control de esfuerzo pesquero; a estos últimos buques nos referiremos como “predecesores” de los buques accidentados. Se comparan las dimensiones principales de cada buque y de su predecesor, resultando que los buques accidentados comparten características de diseño comunes que son sensiblemente diferentes en los buques predecesores, y enlazando dichas características de diseño con los requisitos de la nueva normativa de control del esfuerzo pesquero bajo la que se construyeron estos barcos. Ello permite establecer una relación entre los accidentes y el mencionado cambio normativo. A continuación se compara el margen con que se cumplían los criterios reglamentarios de estabilidad entre los buques accidentados y los predecesores, encontrándose que en cuatro de los cinco casos los predecesores cumplían los criterios de estabilidad con mayor holgura que los buques accidentados. Los resultados obtenidos en este punto permiten establecer una relación entre el cambio de normativa de esfuerzo pesquero y la estabilidad de los buques. Los cinco buques accidentados cumplían con los criterios reglamentarios de estabilidad en vigor, lo que cuestiona la relación entre esos criterios y la seguridad. Por ello se extiende la comparativa entre pesqueros a dos nuevos campos relacionados con la estabilidad y la seguridad delos buques: • Movimientos a bordo (operatividad del buque), y • Criterios de estabilidad en condiciones meteorológicas adversas El estudio de la operatividad muestra que los buques accidentados tenían, en general, una mayor operatividad que sus predecesores, contrariamente a lo que sucedía con el cumplimiento de los criterios reglamentarios de estabilidad. Por último, se comprueba el desempeño de los diez buques en dos criterios específicos de estabilidad en caso de mal tiempo: el criterio IMO de viento y balance intenso, y un criterio de estabilidad de nueva generación, incluyendo la contribución original del autor de considerar agua en cubierta. Las tendencias observadas en estas dos comparativas son opuestas, lo que permite cuestionar la validez del último criterio sin un control exhaustivo de los parámetros de su formulación, poniendo de manifiesto la necesidad de más investigaciones sobre ese criterio antes de su adopción para uso regulatorio. El conjunto de estos resultados permite obtener una serie de conclusiones en la comparativa entre ambos conjuntos de buques pesqueros. Si bien los resultados de este trabajo no muestran que la aprobación de la nueva normativa de esfuerzo pesquero haya significado una merma general de seguridad en sectores enteros de la flota pesquera, sí se concluye que permitió que algunos diseños de buques pesqueros, posiblemente en busca de la mayor eficiencia compatible con dicha normativa, quedaran con una estabilidad precaria, poniendo de manifiesto que la relación entre seguridad y criterios de estabilidad no es unívoca, y la necesidad de que éstos evolucionen y se adapten a los nuevos diseños de buques pesqueros para continuar garantizando su seguridad. También se concluye que la estabilidad es un aspecto transversal del diseño de los buques, por lo que cualquier reforma normativa que afecte al diseño de los pesqueros o su forma de operar debería estar sujeta a evaluación por parte de las autoridades responsables de la seguridad marítima con carácter previo a su aprobación. ABSTRACT Between 2004 and 2007 five small Spanish fishing vessels sank in stability related accidents. These vessels had similar characteristics, had relatively short age, and had been built in a period of a few years. Most crewmembers of these five vessels died or disappeared in those accidents. This set of accidents had significant social and media impact. Among naval architects and seamen of the fishing sector these accidents were related to the design constraints imposed by the fishing control effort regulations. The accidents were investigated and the official reports issued; this alleged relationship was not explored. This thesis aims to investigate the relationship between those accidents and changes in fishing effort control regulations. In the introduction, the fishing effort control regulation is exposed, data of the Spanish fishing fleet structure and its accident rates are presented, and stability criteria dealt with in this work are explained, detailing its relationship with fishing vessel safety. A statistical analysis of the accident rates in the fishing sector in Spain is performed afterwards. The objective is determining whether the set of accidents studied constitute an anomaly or, on the contrary, they are not statistically relevant. Fishing vessels accident rates is analyzed from several fishing vessel databases in Spain. It is concluded that the set of studied accidents is statistically relevant, as the probability of occurrence of the five happenings is extremely low, considering the loss rates in the subsector of the Spanish fishing fleet where the studied vessels are fitted within. From this point the thesis focuses in comparing the vessels lost and the vessels that were decommissioned to build them as required by the fishing effort control regulation; these vessels will be referred to as “predecessors” of the sunk vessels. The main dimensions between each lost vessel and her predecessor are compared, leading to the conclusion that the lost vessels share design characteristics which are sensibly different from the predecessors, and linking these design characteristics with the requirements imposed by the new fishing control effort regulations. This allows establishing a relationship between the accidents and this regulation change. Then the margin in fulfilling the regulatory stability criteria among the vessels is compared, resulting, in four of the five cases, that predecessors meet the stability criteria with greater clearance than the sunk vessels. The results obtained at this point would establish a relationship between the change of fishing effort control regulation and the stability of vessels. The five lost vessels complied with the stability criteria in force, so the relation between these criteria and safety is put in question. Consequently, the comparison among vessels is extended to other fields related to safety and stability: • Motions onboard (operability), and • Specific stability criteria in rough weather The operability study shows that the lost vessels had in general greater operability than their predecessors, just the opposite as when comparing stability criteria. Finally, performance under specific rough weather stability criteria is checked. The criteria studied are the IMO Weather Criterion, and one of the 2nd generation stability criteria under development by IMO considering in this last case the presence of water on deck, which is an original contribution by the author. The observed trends in these two cases are opposite, allowing to put into question the last criterion validity without an exhaustive control of its formulation parameters; indicating that further research might be necessary before using it for regulatory purposes. The analysis of this set of results leads to some conclusions when comparing both groups of fishing vessels. While the results obtained are not conclusive in the sense that the entry into force of a new fishing effort control in 1998 caused a generalized safety reduction in whole sectors of the Spanish fishing fleet, it can be concluded that it opened the door for some vessel designs resulting with precarious stability. This evidences that the relation between safety and stability criteria is not univocal, so stability criteria needs to evolve for adapting to new fishing vessels designs so their safety is still guaranteed. It is also concluded that stability is a transversal aspect to ship design and operability, implying that any legislative reform affecting ship design or operating modes should be subjected to assessing by the authorities responsible for marine safety before being adopted.

Higher levels of physical fitness are associated with a reduced risk of suffering sarcopenic obesity and better perceived health among elderly. The EXERNET multi-center study

Evaluar la asociación entre los niveles físicos de la aptitud, de calidad relacionada con la salud de la vida (CVRS) y la obesidad sarcopénica

A flexible open source web platform to facilitate Learning Object evaluation

Systematic evaluation of Learning Objects is essential to make high quality Web-based education possible. For this reason, several educational repositories and e-Learning systems have developed their own evaluation models and tools. However, the differences of the context in which Learning Objects are produced and consumed suggest that no single evaluation model is sufficient for all scenarios. Besides, no much effort has been put in developing open tools to facilitate Learning Object evaluation and use the quality information for the benefit of end users. This paper presents LOEP, an open source web platform that aims to facilitate Learning Object evaluation in different scenarios and educational settings by supporting and integrating several evaluation models and quality metrics. The work exposed in this paper shows that LOEP is capable of providing Learning Object evaluation to e-Learning systems in an open, low cost, reliable and effective way. Possible scenarios where LOEP could be used to implement quality control policies and to enhance search engines are also described. Finally, we report the results of a survey conducted among reviewers that used LOEP, showing that they perceived LOEP as a powerful and easy to use tool for evaluating Learning Objects.

Best practises for multilingual linked open data: a community effort

The W3C Best Practises for Multilingual Linked Open Data community group was born one year ago during the last MLW workshop in Rome. Nowadays, it continues leading the effort of a numerous community towards acquiring a shared view of the issues caused by multilingualism on the Web of Data and their possible solutions. Despite our initial optimism, we found the task of identifying best practises for ML-LOD a difficult one, requiring a deep understanding of the Web of Data in its multilingual dimension and in its practical problems. In this talk we will review the progresses of the group so far, mainly in the identification and analysis of topics, use cases, and design patterns, as well as the future challenges.

Urban transport interchanges: Importance-Performance analysis for evaluating perceived quality

As the world becomes more urbanised, public transport in cities must seek to provide viable alternatives to individual car transport. At an urban level, interchanges in public transport networks provide easy transfers between and within different transport modes and facilitate seamless travel. This study proposes a methodological framework with which to identify the factors that travellers view as key elements of an urban transport interchange. An attitudinal survey was undertaken in order to collect information about users? needs and perceptions in the Moncloa interchange in Madrid, Spain. The results obtained from an Importance-Performance Analysis (IPA) show that aspects related to the signposting of different facilities and transport services, the internal design of the interchange and the surrounding area, and safety and security are the greatest strengths of the interchange.

Perfil antropométrico y respuesta psico-fisiológica en escalada deportiva en roca: Diferencias entre modalidades

En la literatura se ha descrito el perfil antropométrico y la respuesta psicofisiológica en escalada deportiva en roca, pero hasta la fecha, no se habían analizado las diferencias existentes entre sus principales modalidades. El objetivo de la presente tesis fue describir las características antropométricas del escalador de competición y comprobar la existencia de diferencias entre los participantes de distintas modalidades, así como analizar la respuesta psico-fisiológica durante la ejecución de un búlder y una vía, además de evaluar las diferencias entre su realización a vista o tras un ensayo. Para ello, efectuamos dos estudios diferentes: en el primero participaron voluntariamente 61 hombres y 18 mujeres, participantes en cuatro pruebas del circuito nacional de competición de escalada durante el año 2009, tres de ellas de la modalidad de dificultad a vista y una de búlder. Se realizaron mediciones antropométricas, prueba de fuerza de prensión manual antes y después de competir, y se cumplimentó un cuestionario donde se evaluaba la percepción del esfuerzo y la experiencia deportiva. En el segundo estudio, 23 escaladores, 15 hombres y 8 mujeres, divididos en tres grupos en función de su nivel de rendimiento, realizaron de manera voluntaria distintas pruebas durante tres días separados entre sí al menos 48 horas. El primer día rellenaron un cuestionario sobre su experiencia deportiva y nivel de rendimiento, fueron pesados, tallados y sometidos a un escáner de cuerpo completo en densitómetro con objeto de medir la composición corporal. El segundo día realizaron previo calentamiento, un búlder a vista y, tras un descanso de 15 minutos, escalaron una vía a vista acorde con su nivel. El tercer día, después de calentar y disponer de 20 minutos para ensayarlo, repitieron la escalada del búlder. Tras un descanso de 15 minutos y 20 minutos de ensayo, realizaron un segundo intento a la vía. Se registraron los valores en la respuesta cardiorrespiratoria, se obtuvieron muestras de lactato en sangre del lóbulo de la oreja y se realizaron pruebas de fuerza de prensión manual antes y después de la escalada. También se pasó un cuestionario para medir la ansiedad y autoconfianza así como el esfuerzo percibido. Los resultados no mostraron diferencias antropométricas significativas entre los participantes en competiciones de búlder y los que participaron en competiciones de escalada de dificultad a vista. Se dieron diferencias en la pérdida de fuerza antes y después de escalar entre dichos participantes. Las mujeres obtuvieron menor fuerza de prensión manual que los hombres pero la misma pérdida de fuerza entre el instante antes de competir y el posterior. La respuesta fisiológica durante la ejecución del búlder fue menor que la obtenida durante la ejecución de la vía. Hubo pérdida de fuerza de prensión manual entre el instante anterior y el posterior a ejecutar la vía, pero no al hacer el búlder. Sin embargo, no se dieron diferencias en la ansiedad y la autoestima provocada por ambas modalidades, por lo que deducimos que la ejecución de un búlder y una vía presentan una respuesta fisiológica distinta. Proponemos que la respuesta está relacionada, sobre todo, con las variables de ejecución, de tal manera que a mayor distancia y/o tiempo recorrido en la escalada, mayor será la contribución anaeróbica al esfuerzo y la fatiga manifestada como pérdida de fuerza que, en el caso del búlder, fue mínima o inexistente. En el segundo intento, tras un ensayo de 20 minutos en el búlder, se consiguió mejorar el rendimiento respecto al primer intento, que se manifestó con un aumento en la distancia recorrida. Sin embargo, en la vía no se dieron diferencias entre ambos intentos, ni en la ejecución, ni en la respuesta fisiológica, ni en la ansiedad, ni siquiera en la fuerza de prensión manual. ABSTRACT It has been described in the literature the anthropometric profile and psychophysiological response in rock climbing, but so far not been analyzed differences between its main modalities. The aim of this thesis was to describe the anthropometric characteristics of the climber competitor and check for differences between participants of different modalities and to analyze the psycho-physiological response during the execution of a boulder and a route also to assess differences between on sight and redpoint attempts. We made two different studies: in the first 61 men and 18 women who attended four competitions of national climbing circuit in 2009, three of them on-sight difficulty competitions and a boulder competition participated voluntarily. Anthropometric measurements, a hand grip strength test before and after competing were registered for each climber, and a questionnaire which assessed perception of effort and the climbing experience was fulfilled. In the second study, various tests were conducted on 23 volunteer climbers, 15 men and 8 women, during three days separated for, at least, 48 hours of resting, divided into three groups according to their performance. The first day, climbers completed a questionnaire on their experience and performance level. It was recorded weight, height and they underwent a full body scan densitometer in order to measure body composition. The second day, after previous warming-up, they climbed a boulder on sight and, after a break of 15 minutes, climbed a route on-sight according to their level. The third day, after warming-up and have 20 minutes to try it, they repeated the bouldering climbing. After a break of 15 minutes and 20 minutes of essaying, they made a second attempt at the route. Values in the cardiorespiratory response were recorded, blood lactate samples were obtained from earlobe, and hand grip strength was tested before and after the climb. They also filled a questionnaire to measure anxiety and self-confidence and perceived exertion. The results showed no significant anthropometric differences between participants in bouldering competitions and participants in competitions on-sight difficulty climbing. There were found differences in strength loss before and after climbing between those participants. Women had less hand grip strength than men but the same loss of strength between the records carried out before and after competing. The physiological response recorded for boulder climbing was lower than the obtained for the route. There was loss of hand grip strength between the time before and after running the route but not for bouldering. However, there were no differences in anxiety and self-esteem caused by both modalities, so we conclude that the implementation of a boulder and a route have different physiological responses. We think that this response is mainly related to performance variables, as a greater distance and/or travel time on the climb, the higher the anaerobic contribution to the effort and fatigue as manifested by loss of strength in the case of the boulder was minimal or nonexistent. In the second attempt after 20 minutes in the boulder better performance was achieved on the first attempt, which was manifested by an increment of climbing distance. However, there were the differences in the route between the two attempts, either in execution or in the physiological response, or anxiety, or even in hand grip strength.