The Phase Space as a New Representation of the Dynamical Behaviour of Temperature and Enthalpy in a Reefer monitored with a Multidistributed Sensors Network

The study of temperature gradients in cold stores and containers is a critical issue in the food industry for the quality assurance of products during transport, as well as forminimizing losses. The objective of this work is to develop a new methodology of data analysis based on phase space graphs of temperature and enthalpy, collected by means of multidistributed, low cost and autonomous wireless sensors and loggers. A transoceanic refrigerated transport of lemons in a reefer container ship from Montevideo (Uruguay) to Cartagena (Spain) was monitored with a network of 39 semi-passive TurboTag RFID loggers and 13 i-button loggers. Transport included intermodal transit from transoceanic to short shipping vessels and a truck trip. Data analysis is carried out using qualitative phase diagrams computed on the basis of Takens?Ruelle reconstruction of attractors. Fruit stress is quantified in terms of the phase diagram area which characterizes the cyclic behaviour of temperature. Areas within the enthalpy phase diagram computed for the short sea shipping transport were 5 times higher than those computed for the long sea shipping, with coefficients of variation above 100% for both periods. This new methodology for data analysis highlights the significant heterogeneity of thermohygrometric conditions at different locations in the container.

Self-similar motion of laser half-space plasmas. II. Thermal waves and intermediate regimes

The one-dimensional self-similar motion of an initially cold, half-space plasma of electron density n,produced by the (anomalous) absorption of a laser pulse of irradiation

€~4'3, a qualitative discussion of how plasma behavior changes with a, is given.

Plasma kinetics issues in an ESA study for a plasma laboratory in space

A study supported by the European Space Agency (ESA), in the context of its General Studies Programme, performed an investigation of the possible use of space for studies in pure and applied plasma physics, in areas not traditionally covered by ‘space plasma physics’. A set of experiments have been identified that can potentially provide access to new phenomena and to allow advances in several fields of plasma science. These experiments concern phenomena on a spatial scale (101–104 m) intermediate between what is achievable on the ground and the usual solar system plasma observations. Detailed feasibility studies have been performed for three experiments: active magnetic experiments, largescale discharges and long tether–plasma interactions. The perspectives opened by these experiments are discussed for magnetic reconnection, instabilities, MHD turbulence, atomic excited states kinetics, weakly ionized plasmas,plasma diagnostics, artificial auroras and atmospheric studies. The discussion is also supported by results of numerical simulations and estimates.

Analysis of Magnetic Nozzles For Space Plasma Thrusters = Análisis de Toberas Magnéticas para Motores Espaciales de Plasma

Esta tesis presenta un análisis teórico del funcionamiento de toberas magnéticas para la propulsión espacial por plasmas. El estudio está basado en un modelo tridimensional y bi-fluido de la expansión supersónica de un plasma caliente en un campo magnético divergente. El modelo básico es ampliado progresivamente con la inclusión de términos convectivos dominantes de electrones, el campo magnético inducido por el plasma, poblaciones electrónicas múltiples a distintas temperaturas, y la capacidad de integrar el flujo en la región de expansión lejana. La respuesta hiperbólica del plasma es integrada con alta precisión y eficiencia haciendo uso del método de las líneas características. Se realiza una caracterización paramétrica de la expansión 2D del plasma en términos del grado de magnetización de iones, la geometría del campo magnético, y el perfil inicial del plasma. Se investigan los mecanismos de aceleración, mostrando que el campo ambipolar convierte la energía interna de electrones en energía dirigida de iones. Las corrientes diamagnéticas de Hall, que pueden hallarse distribuidas en el volumen del plasma o localizadas en una delgada capa de corriente en el borde del chorro, son esenciales para la operación de la tobera, ya que la fuerza magnética repulsiva sobre ellas es la encargada de confinar radialmente y acelerar axialmente el plasma. El empuje magnético es la reacción a esta fuerza sobre el motor. La respuesta del plasma muestra la separación gradual hacia adentro de los tubos de iones respecto de los magnéticos, lo cual produce la formación de corrientes eléctricas longitudinales y pone el plasma en rotación. La ganancia de empuje obtenida y las pérdidas radiales de la pluma de plasma se evalúan en función de los parámetros de diseño. Se analiza en detalle la separación magnética del plasma aguas abajo respecto a las líneas magnéticas (cerradas sobre sí mismas), necesaria para la aplicación de la tobera magnética a fines propulsivos. Se demuestra que tres teorías existentes sobre separación, que se fundamentan en la resistividad del plasma, la inercia de electrones, y el campo magnético que induce el plasma, son inadecuadas para la tobera magnética propulsiva, ya que producen separación hacia afuera en lugar de hacia adentro, aumentando la divergencia de la pluma. En su lugar, se muestra que la separación del plasma tiene lugar gracias a la inercia de iones y la desmagnetización gradual del plasma que tiene lugar aguas abajo, que permiten la separación ilimitada del flujo de iones respecto a las líneas de campo en condiciones muy generales. Se evalúa la cantidad de plasma que permanece unida al campo magnético y retorna hacia el motor a lo largo de las líneas cerradas de campo, mostrando que es marginal. Se muestra cómo el campo magnético inducido por el plasma incrementa la divergencia de la tobera magnética y por ende de la pluma de plasma en el caso propulsivo, contrariamente a las predicciones existentes. Se muestra también cómo el inducido favorece la desmagnetización del núcleo del chorro, acelerando la separación magnética. La hipótesis de ambipolaridad de corriente local, común a varios modelos de tobera magnética existentes, es discutida críticamente, mostrando que es inadecuada para el estudio de la separación de plasma. Una inconsistencia grave en la derivación matemática de uno de los modelos más aceptados es señalada y comentada. Incluyendo una especie adicional de electrones supratérmicos en el modelo, se estudia la formación y geometría de dobles capas eléctricas en el interior del plasma. Cuando dicha capa se forma, su curvatura aumenta cuanto más periféricamente se inyecten los electrones supratérmicos, cuanto menor sea el campo magnético, y cuanto más divergente sea la tobera magnética. El plasma con dos temperaturas electrónicas posee un mayor ratio de empuje magnético frente a total. A pesar de ello, no se encuentra ninguna ventaja propulsiva de las dobles capas, reforzando las críticas existentes frente a las propuestas de estas formaciones como un mecanismo de empuje. Por último, se presenta una formulación general de modelos autosemejantes de la expansión 2D de una pluma no magnetizada en el vacío. El error asociado a la hipótesis de autosemejanza es calculado, mostrando que es pequeño para plumas hipersónicas. Tres modelos de la literatura son particularizados a partir de la formulación general y comparados. Abstract This Thesis presents a theoretical analysis of the operation of magnetic nozzles for plasma space propulsion. The study is based on a two-dimensional, two-fluid model of the supersonic expansion of a hot plasma in a divergent magnetic field. The basic model is extended progressively to include the dominant electron convective terms, the plasma-induced magnetic field, multi-temperature electron populations, and the capability to integrate the plasma flow in the far expansion region. The hyperbolic plasma response is integrated accurately and efficiently with the method of the characteristic lines. The 2D plasma expansion is characterized parametrically in terms of the ion magnetization strength, the magnetic field geometry, and the initial plasma profile. Acceleration mechanisms are investigated, showing that the ambipolar electric field converts the internal electron energy into directed ion energy. The diamagnetic electron Hall current, which can be distributed in the plasma volume or localized in a thin current sheet at the jet edge, is shown to be central for the operation of the magnetic nozzle. The repelling magnetic force on this current is responsible for the radial confinement and axial acceleration of the plasma, and magnetic thrust is the reaction to this force on the magnetic coils of the thruster. The plasma response exhibits a gradual inward separation of the ion streamtubes from the magnetic streamtubes, which focuses the jet about the nozzle axis, gives rise to the formation of longitudinal currents and sets the plasma into rotation. The obtained thrust gain in the magnetic nozzle and radial plasma losses are evaluated as a function of the design parameters. The downstream plasma detachment from the closed magnetic field lines, required for the propulsive application of the magnetic nozzle, is investigated in detail. Three prevailing detachment theories for magnetic nozzles, relying on plasma resistivity, electron inertia, and the plasma-induced magnetic field, are shown to be inadequate for the propulsive magnetic nozzle, as these mechanisms detach the plume outward, increasing its divergence, rather than focusing it as desired. Instead, plasma detachment is shown to occur essentially due to ion inertia and the gradual demagnetization that takes place downstream, which enable the unbounded inward ion separation from the magnetic lines beyond the turning point of the outermost plasma streamline under rather general conditions. The plasma fraction that remains attached to the field and turns around along the magnetic field back to the thruster is evaluated and shown to be marginal. The plasmainduced magnetic field is shown to increase the divergence of the nozzle and the resulting plasma plume in the propulsive case, and to enhance the demagnetization of the central part of the plasma jet, contrary to existing predictions. The increased demagnetization favors the earlier ion inward separation from the magnetic field. The local current ambipolarity assumption, common to many existing magnetic nozzle models, is critically discussed, showing that it is unsuitable for the study of plasma detachment. A grave mathematical inconsistency in a well-accepted model, related to the acceptance of this assumption, is found out and commented on. The formation and 2D shape of electric double layers in the plasma expansion is studied with the inclusion of an additional suprathermal electron population in the model. When a double layer forms, its curvature is shown to increase the more peripherally suprathermal electrons are injected, the lower the magnetic field strength, and the more divergent the magnetic nozzle is. The twoelectron- temperature plasma is seen to have a greater magnetic-to-total thrust ratio. Notwithstanding, no propulsive advantage of the double layer is found, supporting and reinforcing previous critiques to their proposal as a thrust mechanism. Finally, a general framework of self-similar models of a 2D unmagnetized plasma plume expansion into vacuum is presented and discussed. The error associated with the self-similarity assumption is calculated and shown to be small for hypersonic plasma plumes. Three models of the literature are recovered as particularizations from the general framework and compared.

High Intensity Low Temperature (HILT) performance of space concentrator GaInP/GaInAs/Ge MJ SCs

In the work, the results of an investigation of GaInP/GaInAs/Ge MJ SCs intended for converting concentrated solar radiation, when operating at low temperatures (down to -190 degrees C) are presented. A kink of the cell I-V characteristic has been observed in the region close to V-oc starting from -20 degrees C at operation under concentrated sunlight. The causes for its occurrence have been analyzed and the reasons for formation of a built-in potential barrier for majority charge carriers at the n-GaInP/n-Ge isotype hetero-interface are discussed. The effect of charge carrier transport in n-GaInP/n-p Ge heterostructures on MJ SC output characteristics at low temperatures has been studied including EL technique.

Optimization and evaluation in space conditions of multi-GHz optical modulators

Among the different optical modulator technologies available such as polymer, III-V semiconductors, Silicon, the well-known Lithium Niobate (LN) offers the best trade-off in terms of performances, ease of use, and power handling capability [1-9]. The LN technology is still widely deployed within the current high data rate fibre optic communications networks. This technology is also the most mature and guarantees the reliability which is required for space applications [9].In or der to fulfil the target specifications of opto-microwave payloads, an optimization of the design of a Mach-Zehnder (MZ) modulator working at the 1500nm telecom wavelength was performed in the frame of the ESA-ARTES "Multi GigaHertz Optical Modulator" (MGOM) project in order to reach ultra-low optical insertion loss and low effective driving voltage in the Ka band. The selected modulator configuration was the X-cut crystal orientation, associated to high stability Titanium in-diffusion process for the optical waveguide. Starting from an initial modulator configuration exhibiting 9 V drive voltage @ 30 GHz, a complete redesign of the coplanar microwave electrodes was carried out in order to reach a 6 V drive voltage @ 30GHz version. This redesign was associated to an optimization of the interaction between the optical waveguide and the electrodes. Following the optimisation steps, an evaluation program was applied on a lot of 8 identical modulators. A full characterisation was carried out to compare performances, showing small variations between the initial and final functional characteristics. In parallel, two similar modulators were submitted to both gamma (10-100 krad) and proton irradiation (10.109 p/cm²) with minor performance degradation.

High-brightness all semiconductor laser at 1.57 µm for space-borne lidar measurements of atmospheric carbon dioxide: device design and analysis of requirements

The availability of suitable laser sources is one of the main challenges in future space missions for accurate measurement of atmospheric CO2. The main objective of the European project BRITESPACE is to demonstrate the feasibility of an all-semiconductor laser source to be used as a space-borne laser transmitter in an Integrated Path Differential Absorption (IPDA) lidar system. We present here the proposed transmitter and system architectures, the initial device design and the results of the simulations performed in order to estimate the source requirements in terms of power, beam quality, and spectral properties to achieve the required measurement accuracy. The laser transmitter is based on two InGaAsP/InP monolithic Master Oscillator Power Amplifiers (MOPAs), providing the ON and OFF wavelengths close to the selected absorption line around 1.57 µm. Each MOPA consists of a frequency stabilized Distributed Feedback (DFB) master oscillator, a modulator section, and a tapered semiconductor amplifier optimized to maximize the optical output power. The design of the space-compliant laser module includes the beam forming optics and the thermoelectric coolers.The proposed system replaces the conventional pulsed source with a modulated continuous wave source using the Random Modulation-Continuous Wave (RM-CW) approach, allowing the designed semiconductor MOPA to be applicable in such applications. The system requirements for obtaining a CO2 retrieval accuracy of 1 ppmv and a spatial resolution of less than 10 meters have been defined. Envelope estimated of the returns indicate that the average power needed is of a few watts and that the main noise source is the ambient noise.

Escuela en Hunstanton de A+P Smithson: el Nuevo Brutalismo en Inglaterra

La tesis estudia en detalle la Hunstanton Secondary School y su trascendencia. Así, se trata de analizar el conjunto de procesos que hace que esta obra sea entendida como el manifiesto construido del Nuevo Brutalismo en Inglaterra. La Escuela en Hunstanton fue la primera obra proyectada y construida por los Smithson y, si se considera que el legado que dejaron Alison y Peter fue más de carácter teórico que constructivo, ésta se ha convertido en un edificio relevante dentro de su trayectoria profesional. Además, el rigor con el que fue realizado el proyecto y la ratificación de las ideas que subyacían tras él, a pesar del extenso intervalo temporal que caracterizó su proceso constructivo, hacen que esta obra se convierta en una síntesis de la filosofía arquitectónica gestada en Inglaterra tras la guerra. Por otro lado, hay que contemplar que la sencillez del lenguaje constructivo empleado, viene dada por la compleja reiteración de los sistemas proyectuales tipo que formulan para este proyecto y el establecimiento de una gramática casi matemática. La sistematización de su vocabulario hace que, tras el análisis de su arquitectura, se encuentren nuevos parámetros capaces de documentar este momento de la historia de la arquitectura en Inglaterra. La envolvente del edificio constituye al tiempo fachada y estructura. Esta característica ha pasado inadvertida cuando, en numerosas ocasiones y durante seis décadas, se han venido publicando las fotografías de la obra terminada y los dibujos que los Smithson habían realizado en la fase de proyecto. Como consecuencia, ha proliferado el conocimiento de la arquitectura de la escuela a un nivel más superficial, mostrando el resultado formal de la misma y con ello, simplemente se ha dejado intuir la gran influencia que Mies Van der Rohe provocó en los Smithson en los primeros años de desarrollo de su labor como arquitectos. El objetivo principal de esta tesis es, por tanto, facilitar el entendimiento del espacio que propusieron los Smithson a partir del análisis pormenorizado de los distintos sistemas constructivos empleados y del equipo personal que se vio implicado en su construcción. Para ello, es necesario abordar el estudio de los materiales y mecanismos proyectuales que hicieron posible que este conjunto de espacios –interiores y exteriores- resultase definido a través de la relación entre dos variables: una evidente austeridad en la utilización de los materiales y la combinación de los distintos sistemas intervinientes a partir del recurso de la repetición. La Escuela de Hunstanton, a pesar de las inoportunas intervenciones realizadas para adaptar el centro a unas necesidades derivadas de su número de alumnos actual (el doble que en su inicio), continúa proclamando su integridad espacial. Partiendo de la hipótesis de que la arquitectura de la Secondary School en Hunstanton, representa el manifiesto construido del Nuevo Brutalismo en Inglaterra, se concluye que el resultado de su construcción fue consecuencia de numerosas influencias que, en relación con los Smithson, estuvieron presentes durante los años en que se gestó. Algo que va más allá de la conclusión de aquellos debates arquitectónicos que se habían emprendido, por escrito, en las distintas revistas locales de arquitectura. Los mecanismos compositivos empleados, también habían tenido mucho que ver con lo que los historiadores del arte habían venido aportando a la historia de la arquitectura hasta ese momento. Desde los años 40, éstos últimos habían emprendido una nueva manera de contar la historia en la que quedaba fuertemente involucrada su capacidad crítica, provocando interferencias en la mentalidad de los arquitectos de nueva generación y otorgándoles un bagaje cultural subliminalmente determinado y subjetivo. Por supuesto, en el resultado arquitectónico final, también tuvieron mucho que ver los recursos materiales de que se disponía en aquel momento. Así como la optimización de los mismos a través de la adopción de nuevas metodologías de trabajo como puede ser la organización multidisciplinar. La inclusión del ingeniero Ronald Jenkins en el equipo de trabajo de los Smithson supuso una gran oportunidad. Este ingeniero, propuso poner en práctica la entonces innovadora Teoría Plástica en la metodología de cálculo estructural y, con ello consiguió enriquecer el resultado espacial, posibilitando la percepción de una arquitectura ligera –a pesar de sus grandes dimensiones- y vinculada al paisaje donde se inserta. Pero todos estos condicionantes fueron pasados a su vez por el filtro del deseo de una regeneración social, que buscaba el modelo de la sociedad americana. El Buen Vivir que propugnaban los americanos, viajaba a Europa de la mano de la publicidad. Y, al igual que la componente publicitaria tuvo algo que ver en el proceso creativo de la arquitectura de la escuela, también lo tuvo el conocimiento del arte pop y sus recursos compositivos. ABSTRACT The thesis examines in detail the project of Hunstanton Secondary School and the architectural language’s significance used in it. Thus, it is reinterpreting the set of processes that makes this work to be understood as the “built manifesto” of the English New Brutalism. Hunstanton School’s project was the first work designed and built by the Smithsons and, considering their legacy -more theoretical than constructed-, make of this building an important work within their career. In addition, the rigor with which it was carried out the project and the ratification of the ideas lying behind him, make this work becomes a synthesis of the architectural philosophy gestated in England after the war, despite the extensive time interval that characterized its construction process. On the other hand, it must be considered the simplicity of the constructive language used in this project. It is given by the complex projective repetition of the type systems and by the establishment of a quasi-mathematical grammar. The systematization of its vocabulary makes, after a deep analysis of its architecture, to recognize new parameters able to document this moment in the history of English architecture. The building envelope is, at the same time, facade and structure. This feature has been overlooked when many photographs of the finished work and its drawings -made by the Smithsons during the design phase- has been exposed over six decades. As a result, it has proliferated the knowledge of Hunstanton Secondary Modern School’s architecture as a more superficial level, just by showing the formal outcome of its project and thus simply been left the sensation of the great influence that Mies Van der Rohe provocated in the Smithson thinking during their first years of developing his work as architects. Therefore, the main objective of this thesis is to facilitate an understanding of the Smithsons’ proposed space. This is made possible through the detailed analysis of the different systems used in it and, by understanding the knowledge of the team involved in its construction. To prove this, it is necessary to pay attention to the study of the materials and to different project mechanisms that make possible to this group of spaces -inner and outer- be defined through the game played by two variables: an apparent austerity in the use of materials and the combination of the various participant systems through the resource of repetition. Despite the untimely interventions made in order to adapt the center to the new needs (the large increase in the number of students), Hunstanton School’s building continues proclaiming its spatial integrity. Assuming that Hunstanton Secondary School’s architecture represents the manifesto of New Brutalism in England, it is concluded that the result of its construction was the result of numerous influences that, in connection with the Smithsons, were present during the years in which its project was conceived. This meaning goes beyond the conclusions made from the architectural debate that was published in many of local architectural magazines. The compositional mechanisms employed, are also linked to what art historians had contributed to the history of architecture until then. Since the 40s, historians had undertaken a new way to tell History. This new mode strongly implied its critical capacity. All this, was causing interferences in the mentality of the architects of the new generation and, giving them a subliminally determined and very subjective cultural background. Of course, the final architectural result had much to do with the material resources available at that time and, with its optimization through the adoption of new working methods as the multidisciplinary organization. The inclusion of engineer Ronald Jenkins in the team of the Smithsons was a great opportunity. He proposed to implement the new Plastic Theory in the structural calculation and thereby he got enrich the spatial results achieved, by enabling the perception of a lightweight construction, despite its large size and, linked to the landscape where it is inserted. But all these conditions were passed through the filter of social regeneration’s desire, following the American society’s model. This American model travelled to Europe in the hands of advertising. And, in the same way that publicity had something to do with the creative process of this architecture, also had a lot to do the knowledge of pop art and its compositional resources.