Estudio geotécnico de arenas de Ottawa y ensayos de mejora con biocalcificación

Este proyecto trata sobre el interés que ofrece la biocalcificación en cuanto a la mejora de las propiedades mecánicas de materiales de construcción. En concreto este proyecto se desarrolla con arenas de Ottawa con intención de extrapolar resultados y de continuar con ensayos en distintos materiales. Se realizan ensayos de caracterización del material en primer lugar para conocer sus propiedades básicas y posteriormente se preparan los cultivos bacteriológicos que ayuden a biocalcificar el medio de estudio. Tras las correspondientes investigaciones y pruebas respecto al método más efectivo, cantidad de inyecciones, duración… usando también conocimientos químicos para la preparación de los reactivos, se procede a la repetición de los ensayos para ver la variación en las propiedades y poder sacar conclusiones útiles en la mejora visible de éstas. ABSTRACT This project discuss the interest of biocalcification offered by regarding the improvement of the mechanical properties of construction materials. Specifically this project is developed with Ottawa sands intending to extrapolate findings and to continue testing different materials. Firstly, characterization tests are performed to find out its basic material properties and after that, bacterial cultures are prepared to help studying how to biocalcify the sample. After the needed investigations and tests looking for the most effective method, accurate number of injections, desired duration ... also using chemical knowledge for the preparation of the reagents; we proceed to retest the samples to see the variation in properties and be able to get useful conclusions of a visible improvement of these properties.

Free-Form, High Energy Performance, Transparent Vacuum Envelope

El artículo examina un nuevo sistema envolvente ligero, delgado, con ahorro energético, libre de formas diseñado para su uso en proyectos de arquitectura.

Leveraging heterogeneity for energy minimization in data centers

Energy consumption in data centers is nowadays a critical objective because of its dramatic environmental and economic impact. Over the last years, several approaches have been proposed to tackle the energy/cost optimization problem, but most of them have failed on providing an analytical model to target both the static and dynamic optimization domains for complex heterogeneous data centers. This paper proposes and solves an optimization problem for the energy-driven configuration of a heterogeneous data center. It also advances in the proposition of a new mechanism for task allocation and distribution of workload. The combination of both approaches outperforms previous published results in the field of energy minimization in heterogeneous data centers and scopes a promising area of research.

Chaos synchronization in optically programmable logic cells

A possible approach to the synchronization of chaotic circuits is reported. It is based on an Optically Programmable Logic Cell and the signals are fully digital. A method to study the characteristics of the obtained chaos is reported as well as a new technique to compare the obtained chaos from an emitter and a receiver. This technique allows the synchronization of chaotic signals. The signals received at the receiver, composed by the addition of information and chaotic signals, are compared with the chaos generated there and a pure information signal can be detected. Its application to cryptography in Optical Communications comes directly from these properties. The model here presented is based on a computer simulation.

Image processing based on a model of the mammalian retina

A first study in order to construct a simple model of the mammalian retina is reported. The basic elements for this model are Optical Programmable Logic Cells, OPLCs, previously employed as a functional element for Optical Computing. The same type of circuit simulates the five types of neurons present in the retina. Different responses are obtained by modifying either internal or external connections. Two types of behaviors are reported: symmetrical and non-symmetrical with respect to light position. Some other higher functions, as the possibility to differentiate between symmetric and non-symmetric light images, are performed by another simulation of the first layers of the visual cortex. The possibility to apply these models to image processing is reported.

Comparison of multi-year Ka-band propagation characteristics at four sites in North America and Europe

Tropospheric phenomena such as clouds and mainly rain cause higher attenuation at Ka-band than at lower frequencies. In this collaborative paper, the main results of four long-term Ka-band propagation campaigns are presented. The experiments are carried out in Ottawa, Canada (satellite Anik F2); Aveiro, Portugal; Madrid, Spain; and Toulouse, France (satellite HotBird 6 in the last three cases) and have been running since 2004 in Aveiro, 2006 in Ottawa and Madrid, and 2008 in Toulouse. After a brief introduction of the experiments, rain rate and excess attenuation results are discussed, first for a common two-year measurement period and later for the whole database available. Seasonal attenuation statistics for Madrid, Ottawa and Aveiro are compared. Finally, fade duration and fade slope statistics derived at three locations are presented and discussed.

Five-year results of a slant-path propagation experiment at 20 GHz in Madrid

Satellite operators are starting to use the Ka-band (30/20 GHz) for communications systems requiring higher traffic capacity. The use of this band is expected to experience a significant growth in the next few years, as several operators have reported plans to launch new satellites with Ka-band capacity. It is worth mentioning the Ka-Sat satellite in Europe, launched in 2010, and ViaSat-1, of 2011, with coverage of USA1. Some other examples can be found in other parts of the World. Recent satellite communications standards, such as DVB-S22 or DVB-RCS3, which provide means to mitigate propagation impairments, have been developed with the objective of improving the use of the Ka-band, in comparison with previous technical standards. In the next years, the ALPHASAT satellite will bring about new opportunities4 for carrying out propagation and telecommunication experiments in the Ka- and Q/V-bands. Commercial uses are focused on the provision of high speed data communications, for Internet access and other applications. In the near future, it is expected that higher and higher data rates will also be needed to broadcast richer multimedia contents, including HD-TV, interactive content or 3D-TV. All of these services may be provided in the future by satellites of the current generation, whose life span can extend up to 2025 in some cases. Depending on local regulations, the available bandwidth for the satellite fixed and broadcasting services in the Ka-band is in excess of several hundred MHz, bidirectional, comprising more than 1 GHz for each sub-band in some cases. In this paper, the results of a propagation experiment that is being carried out at Universidad Politécnica de Madrid (UPM), Spain, are presented5. The objective of the experiment is twofold: gathering experimental time series of attenuation and analyzing them in order to characterize the propagation channel at these frequencies6. The experiment and statistical results correspond to five complete years of measurements. The experiment is described in more detail in Section II. Yearly characteristics of rain attenuation are presented in Section III, whereas Section IV is dedicated to the monthly, seasonal, and hourly characteristics. Section V covers the dynamic characteristics of this propagation effect, just before the conclusions are described in Section VI.

Teaching art and history to photonics students

The case to be reported in this paper is the teaching of topics involving the relation among Photonics, its history, the international situation and the artistic movements in each period. These kind of new studies correspond to a new tendency in teaching interdisciplinary topics to students coming from different areas. Two main courses, one in History and other one in Art, will be taken as examples. Theses two courses have been taught for several years in Madrid, Spain, for Telecomm students and the results have been very satisfactory

Boolean logic device done with DFB laser diode

We present simulation results on how power output-input characteristic Instability in Distributed FeedBack -DFB semiconductor laser diode SLA can be employed to implemented Boolean logic device. Two configurations of DFB Laser diode under external optical injection, either in the transmission or in the reflective mode of operation, is used to implement different Optical Logic Cells (OLCs), called the Q- and the P-Device OLCs. The external optical injection correspond to two inputs data plus a cw control signal that allows to choose the Boolean logic function to be implement. DFB laser diode parameters are choosing to obtain an output-input characteristic with the values desired. The desired values are mainly the on-off contrast and switching power, conforming shape of hysteretic cycle. Two DFB lasers in cascade, one working in transmission operation and the other one in reflective operation, allows designing an inputoutput characteristic based on the same respond of a self-electrooptic effect device is obtained. Input power for a bit'T' is 35 uW(70uW) and a bit "0" is zero for all the Boolean function to be execute. Device control signal range to choose the logic function is 0-140 uW (280 uW). Q-device (P-device)

Laser diode bistability as sensor of optical signals pameters

Laser Diodes have been employed many times as light sources on different kinds of optical sensors. Their main function in these applications was the emission of an optical radiation impinging onto a certain object and, according to the characteristics of the reflected light, some information about this object was obtained. Laser diodes were acting, in a certain way, just as passive devices where their only function was to provide the adequate radiation to be later measured and analyzed. The objective of this paper is to report a new concept on the use of laser diodes taking into account their optical bistable properties. As it has been shown in several places, different laser diodes as, for example, DFB lasers and FP lasers, offer bistable characteristics being these characteristics a function of different parameters as wavelength, light polarization or temperature. Laser Bistability is strongly dependent on them and any small variation of above parameters gives rise to a strong change in the characteristics of its non-linear properties. These variations are analyzed and their application in sensing reported. The dependence on wavelength, spectral width, input power and phase variations, mainly for a Fabry-Perot Laser structure as basic configuration, is shown in this paper.

BHLS, Bus, tram: tesi, antitesi, sintesi.

Il sistema di trasporto detto Bus Rapid Transit (BRT) è stato lanciato a Curitiba, in Brasile, nel 1974 per offrire un trasporto in bus efficiente ed efficace nella città in rapida espansione. Questa sperienza, insieme a quella di Ottawa (1983) e Quito (1994) ha dimostrato di essere una soluzione molto efficiente per il trasporto di massa. Per tutta l’Europa si sono iniziate a sviluppare esperienze simili, introducendo però un concetto diverso per quanto riguarda la qualità di servizio. Infatti sistemi come il “trunk network” nella Svezia, il Metrobus nella Germania oppure il BHNS (Bus à Aut. Niveau de Service) nella Francia trattano la qualità di servizio da una prospettiva più ampia che il BRT, dato che considerano aspetti come l’immagine ed il comfort oltre che velocità, frequenza e affidabilità. Questi nuovi sistemi BHLS (Buses with a High Quality of Service) consentono di combinare la qualità di servizio del tram con il costo basso e l’altà flessibilità dei sistema bus, fornendo soluzioni molto interessanti in termini di accessibilità e livelli di servizio, che permettono l’adattamento ai differenti contesti urbani (dimensione, popolazione, densità, ecc.). This article compares different European experiences with tramways and BHLS, especially from the economic point of view, considering their respective costs, benefits and advantages altogether.

Comentarios al nuevo libro de Fathi Habashi De Re Metallica. A Metallurgist on the Move

Fathi Habashi es miembro del Comité Editorial de De Re Metallica desde su fundación, y acaba de publicar el libro De Re Metallica. A Metallurgist on the Move Fathi Habshi nació en Al-Minia, Egipto el 9 de Octubre de 1928, tiene por tanto 87 años. Cursó estudios de Ingeniería Química en la Universidad de Al-Awwal, ahora Universidad de El Cairo (1949). De allí pasó a estudiar Tecnología de la Química Inorgánica en la Universidad de Viena (1959). Obteniendo a continuación una beca del gobierno de Canadá en Ottawa (1960-62). Llegó a América con 32 años y ya se quedó allí, aunque nunca olvidó su país de origen.