Development of Interactive Materials by Engineering Students Using the Descartes Applets.

In a degree course such as Forestry Engineering, the general teaching objectives consist of explaining and helping students to understand the principles of Mechanics. For some time now we have encountered significant difficulties in teaching this subject due to the students' lack of motivation and to their insufficient prior preparation for the topic. If we add to this the discipline's inherent complexity and the students' preconceptions about the subject, these teaching difficulties become considerable. For this reason a series of didactic activities have been introduced sequentially in the teaching of this subject. This work describes the methodology, procedure and results for the action of developing a work project in groups using Descartes software. The results of this experiment can be considered very positive. Some of the critical preconceptions for learning the subject can be corrected, and the tutoring process in the classroom contributes to an improvement in teacherstudent communication. Since this scheme was established, the number of students taking part each academic year has increased, and this is the group with the greatest percentage of passing scores.

A proposal for enhancing the motivation in students of computer programming

Computer programming is known to be one of the most difficult courses for students in the first year of engineering. They are faced with the challenge of abstract thinking and gaining programming skills for the first time. These skills are acquired by continuous practicing from the start of the course. In order to enhance the motivation and dynamism of the learning and assessment processes, we have proposed the use of three educational resources namely screencasts, self-assessment questionnaires and automated grading of assignments. These resources have been made available in Moodle which is a Learning Management System widely used in education environments and adopted by the Telecommunications Engineering School at the Universidad Politécnica de Madrid (UPM). Both teachers and students can enhance the learning and assessment processes through the use of new educational activities such as self-assessment questionnaires and automated grading of assignments. On the other hand, multimedia resources such as screencasts can guide students in complex topics. The resources proposed allow teachers to improve their tutorial actions since they provide immediate feedback and comments to students without the enormous effort of manual correction and evaluation by teachers specially taking into account the large number of students enrolled in the course. In this paper we present the case study where three proposed educational resources were applied. We describe the special features of the course and explain why the use of these resources can both enhance the students? motivation and improve the teaching and learning processes. Our research work was carried out on students attending the "Computer programming" course offered in the first year of a Telecommunications Engineering degree at UPM. This course is mandatory and has more than 450 enrolled students. Our purpose is to encourage the motivation and dynamism of the learning and assessment processes.

Two Novel Methods For The Determination Of The Number Of Components In Independent Components Analysis Models

Independent Components Analysis is a Blind Source Separation method that aims to find the pure source signals mixed together in unknown proportions in the observed signals under study. It does this by searching for factors which are mutually statistically independent. It can thus be classified among the latent-variable based methods. Like other methods based on latent variables, a careful investigation has to be carried out to find out which factors are significant and which are not. Therefore, it is important to dispose of a validation procedure to decide on the optimal number of independent components to include in the final model. This can be made complicated by the fact that two consecutive models may differ in the order and signs of similarly-indexed ICs. As well, the structure of the extracted sources can change as a function of the number of factors calculated. Two methods for determining the optimal number of ICs are proposed in this article and applied to simulated and real datasets to demonstrate their performance.

Analysis of the information about Doctoral Degrees presented in the Spanish universities websites.

Globalization has intensified competition, as evidenced by the growing number of international classification systems (rankings) and the attention paid to them. Doctoral education has an international character in itself. It should promote opportunities for graduate students lo participate in these international studies. The quality and competitiveness are two of the most important issues for universities. To promote the interest of graduates to continue their education after the graduate level, it would be necessary to improve the published information of ihe doctoral programs. It should increase the visibility and provide high-quality, easily accessible and comparable information which includes all the relevant aspects of these programs. The authors analysed the website contents of doctoral programs, it was observed a lack of quality of them and very poor information about the contents, so that it was decided that any of them could constitute a model for creating new websites. The recommendations on the format and contents in the web were made by a discussion group. They recommended an attractive design; a page with easy access to contents and easy to find on Ihe net and with the information in more than one language. It should include complete program and academic staff information. It should also be included the study's results which should be easily accessible and includes quantitative data, such as number of students who completed scholars, publications, research projects, average duration of the studies, etc. It will facilitate the choice of program

An Analysis of the Influence of Students´ Technological Culture on Their Technology

decade has raised the interest among the research community on the acceptance and use of these systems by both teachers and students. At first, the implementation of LMS was based on their technical design and the adaptation of the learning processes to the virtual environment, neglecting students’ characteristics when the systems were deployed, which led to expensive and failing implementations. The Unified Theory of Acceptance and Use of Technology (UTAUT) proposes a framework which allows the study of the acceptance and use of technology that takes into consideration the students’ characteristics and how they affect the acceptance and the degree of use of educational technology. This study questions the role of the user’s attitude towards use of LMS and uses the UTAUT to examine the moderating effect of technological culture in the adoption of LMS in Spain. The results from the comparison and analysis of three different models confirm the relevance of attitude towards use as an antecedent of intention to use the system, as well as the important moderating effect of gender and technological culture. The discussion of results suggests the need for a more in-depth analysis and interrelations of cultural dimensions in the adoption of educational technologies and learning management systems

Methodology for automated generation of multiple choice questions in self assessment

Current trends in the European Higher Education Area (EHEA) are moving towards the continuous evaluation of the students in substitution of the traditional evaluation based on a single test or exam. This fact and the increase in the number of students during last years in Engineering Schools, requires to modify evaluation procedures making them compatible with the educational and research activities. This work presents a methodology for the automatic generation of questions. These questions can be used as self assessment questions by the student and/or as queries by the teacher. The proposed approach is based on the utilization of parametric questions, formulated as multiple choice questions and generated and supported by the utilization of common programs of data sheets and word processors. Through this approach, every teacher can apply the proposed methodology without the use of programs or tools different from those normally used in his/her daily activity

The Minimum Number of Points Taking Part in k-Sets in Sets of Unaligned Points

En este trabajo se da un ejemplo de un conjunto de n puntos situados en posición general, en el que se alcanza el mínimo número de puntos que pueden formar parte de algún k-set para todo k con 1menor que=kmenor quen/2. Se generaliza también, a puntos en posición no general, el resultado de Erdõs et al., 1973, sobre el mínimo número de puntos que pueden formar parte de algún k-set. The study of k- sets is a very relevant topic in the research area of computational geometry. The study of the maximum and minimum number of k-sets in sets of points of the plane in general position, specifically, has been developed at great length in the literature. With respect to the maximum number of k-sets, lower bounds for this maximum have been provided by Erdõs et al., Edelsbrunner and Welzl, and later by Toth. Dey also stated an upper bound for this maximum number of k-sets. With respect to the minimum number of k-set, this has been stated by Erdos el al. and, independently, by Lovasz et al. In this paper the authors give an example of a set of n points in the plane in general position (no three collinear), in which the minimum number of points that can take part in, at least, a k-set is attained for every k with 1 ≤ k < n/2. The authors also extend Erdos’s result about the minimum number of points in general position which can take part in a k-set to a set of n points not necessarily in general position. That is why this work complements the classic works we have mentioned before.

Relationship among research collaboration, number of documents and number of citations. A case study in Spanish computer science production in 2000-2009.

This paper analyzes the relationship among research collaboration, number of documents and number of citations of computer science research activity. It analyzes the number of documents and citations and how they vary by number of authors. They are also analyzed (according to author set cardinality) under different circumstances, that is, when documents are written in different types of collaboration, when documents are published in different document types, when documents are published in different computer science subdisciplines, and, finally, when documents are published by journals with different impact factor quartiles. To investigate the above relationships, this paper analyzes the publications listed in the Web of Science and produced by active Spanish university professors between 2000 and 2009, working in the computer science field. Analyzing all documents, we show that the highest percentage of documents are published by three authors, whereas single-authored documents account for the lowest percentage. By number of citations, there is no positive association between the author cardinality and citation impact. Statistical tests show that documents written by two authors receive more citations per document and year than documents published by more authors. In contrast, results do not show statistically significant differences between documents published by two authors and one author. The research findings suggest that international collaboration results on average in publications with higher citation rates than national and institutional collaborations. We also find differences regarding citation rates between journals and conferences, across different computer science subdisciplines and journal quartiles as expected. Finally, our impression is that the collaborative level (number of authors per document) will increase in the coming years, and documents published by three or four authors will be the trend in computer science literature.

Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Maximizing the number of polychronous groups in spiking networks

In this paper we investigate the effect of biasing the axonal connection delay values in the number of polychronous groups produced for a spiking neuron network model. We use an estimation of distribution algorithm (EDA) that learns tree models to search for optimal delay configurations. Our results indicate that the introduced approach can be used to considerably increase the number of such groups.

Results of students surveys in similar courses given in different centers of the Technical University of Madrid

We present and analyze the results of surveys conducted in recent years with students from two related subjects, but taught in different centers of the University of Madrid. These surveys are part of the objectives of various projects of educational innovation, and applied through the platform Moodle.

Development of a model of cross-curricular competencies of students at the Technical University of Madrid

It is known that cross-curricular competences are required for main companies all over the world to be part of our university graduates as technical knowledge does. That is the reason which has led the university structure to include these competences in the every degree curriculo validated since the European Higher Education Area (EHEA)was introduced in the Spanish university context. But the way used for incorporating them has been developed without the necessary guidelines to generate a qualified model.

Diseño y desarrollo de un sistema basado en Learning Analytics para evaluar la competencia de trabajo en equipo.Design and development of a Learning Analytics System to evaluate group work competence

La adquisición de la competencia grupal es algo básico en la docencia universitaria. Esta tarea va a suponer evaluar diferentes factores en un número elevado de alumnos, lo que puede supone gran complejidad y un esfuerzo elevado. De cara a evitar este esfuerzo se puede pensar en emplear los registros de la interacción de los usuarios almacenados en las plataformas de aprendizaje. Para ello el presente trabajo se basa en el desarrollo de un sistema de Learning Analytics que es utilizado como herramienta para analizar las evidencias individuales de los distintos miembros de un equipo de trabajo. El trabajo desarrolla un modelo teórico apoyado en la herramienta, que permite relacionar las evidencias observadas de forma empírica para cada alumno, con indicadores obtenidos tanto de la acción individual como cooperativo de los miembros de un equipo realizadas a través de los foros de trabajo. Abstract — The development of the group work competence is something basic in university teaching. It should be evaluated, but this means to analyze different issues about the participation of a high number of students which is very complex and implies a lot of effort. In order to facilitate this evaluation it is possible to analyze the logs of students’ interaction in Learning Management Systems. The present work describes the development of a Learning Analytics system that analyzes the interaction of each of the members of working group. This tool is supported by a theoretical model, which allows establishing links between the empirical evidences of each student and the indicators of their action in working forums.

Gravitational actions upon a tether in a non-uniform gravity field with arbitrary number of zonal harmonics

We develop general closed-form expressions for the mutual gravitational potential, resultant and torque acting upon a rigid tethered system moving in a non-uniform gravity field produced by an attracting body with revolution symmetry, such that an arbitrary number of zonal harmonics is considered. The final expressions are series expansion in two small parameters related to the reference radius of the primary and the length of the tether, respectively, each of which are scaled by the mutual distance between their centers of mass. A few numerical experiments are performed to study the convergence behavior of the final expressions, and conclude that for high precision applications it might be necessary to take into account additional perturbation terms, which come from the mutual Two-Body interaction.

A simple mathematical model that describes the growth of the area and the number of total and viable cells in yeast colonies

We propose a model, based on the Gompertz equation, to describe the growth of yeasts colonies on agar medium. This model presents several advantages: (i) one equation describes the colony growth, which previously needed two separate ones (linear increase of radius and of the squared radius); (ii) a similar equation can be applied to total and viable cells, colony area or colony radius, because the number of total cells in mature colonies is proportional to their area; and (iii) its parameters estimate the cell yield, the cell concentration that triggers growth limitation and the effect of this limitation on the specific growth rate. To elaborate the model, area, total and viable cells of 600 colonies of Saccharomyces cerevisiae, Debaryomyces fabryi, Zygosaccharomyces rouxii and Rhodotorula glutinis have been measured. With low inocula, viable cells showed an initial short exponential phase when colonies were not visible. This phase was shortened with higher inocula. In visible or mature colonies, cell growth displayed Gompertz-type kinetics. It was concluded that the cells growth in colonies is similar to liquid cultures only during the first hours, the rest of the time they grow, with near-zero specific growth rates, at least for 3 weeks.