Caracterización de ambientes sonoros en recintos universitarios: influencia del ruido sobre procesos cognitivos básicos

El interés por el estudio de la problemática del ruido en las escuelas y sus efectos sobre los estudiantes a nivel universitarios, es un tema que no ha sido estudiado debidamente. Desgraciadamente, en el ámbito educativo universitario, no existen regulaciones específicas que permitan determinar parámetros preventivos, ni procedimientos de evaluación de ruido dentro de este tipo de instalaciones educativas. Debido a la importancia de los efectos que el ruido tiene sobre la salud y la calidad de vida de los estudiantes universitarios, y consecuentemente en el rendimiento académico; es de suma importancia desarrollar mecanismos que estudien y planteen soluciones que ayuden a garantizar la mejora de la calidad de vida de la población estudiantil. En este trabajo se ha presentado un extenso trabajo que incluye el estudio de los ambientes sonoros a los que los estudiantes universitarios se ven expuestos día a día y se proponen acciones que ayudan a mejorar la calidad acústica en instalaciones educativas. Así mismo se evidencian los efectos que tiene este contaminante sobre la salud psicológica y por consecuencia en el desarrollo intelectual de los estudiantes. Por un lado, se incluye una propuesta de metodología que ayuda a la correcta caracterización de los ambientes sonoros en los cuales se desarrollan los estudiantes a nivel universitario. Esta se realizó haciendo un completo registro de los niveles sonoros durante sus actividades diarias. Así mismo, una encuesta fue aplicada a estudiantes para conocer la percepción que se tiene sobre las condiciones sonoras en ambientes universitarios. Así mismo, se realizó un estudio de la calidad sonora en instalaciones universitarias, el cual deriva la valoración de la molestia al ruido. Se propone una escala de valoración de molestia al ruido, la cual deriva el diseño de una propuesta con acciones de bajo coste frente al ruido. Por otro lado, se evidencian los trastornos que ocasiona este contaminante sobre la salud psicológica de los estudiantes y que afectan el desarrollo académico de estos. Se realizó primeramente la valoración de la atención y la memoria por medio de test psicométricos estandarizados y otros diseñados para este estudio en particular. Por último, con la finalidad de obtener datos objetivos y confiables que permitieron relacionar la influencia negativa del ruido de fondo sobre procesos cognitivos básicos como la atención y la memoria, se llevó a cabo un estudio de la actividad cerebral. Para llevar a cabo esta evaluación se utilizó como principal herramienta el electroencefalograma (EEG), enfocándose en los cambios producidos con y sin exposición a ruido de fondo, específicamente en las bandas de frecuencia relacionadas con procesos cognitivos básicos como los son la atención y la memoria, en este caso la banda theta (4-7 Hz) y la banda beta (13-30 Hz). ABSTRACT The interest in the study of the problem of noise in schools and its impact on students at university level is a topic that has not been properly studied. Unfortunately, there are no specific regulations for determining preventive parameters or noise assessment procedures in university facilities. Due to the importance of the effects that noise has on health and on the quality of life of university students, and consequently on academic performance; is very important to develop mechanisms to evaluate and design solutions that help ensure an improvement in the quality of life of the student population. This thesis has presented an extensive work, which includes the study of the state of the art on the problem of noise in the sound environments to which university students are exposed every day, and the effects on students mainly on attention aspects. On one hand, a general study of the common noise environments of life of university students was carried out, where a methodological proposal is included and that helps in the correct characterization of the sound environments in which university students grow. This proposal includes the assessment of noise exposure, noise dose and a recording of the characteristic sound levels during their daily activities in and out spaces dedicated to their education. Also, a survey was conducted to know the perception that students have on noise conditions in university environments. Also, a method for evaluation of the noise annoyance is proposed, this is through the correlation of two known methods of evaluation. The first method is based on psychoacoustic parameters that allow the evaluation of the sound quality. These parameters were related, obtaining as a result the parameter known as psychoacoustics annoyance. The second method is based on a questionnaire in conjunction with listening tests in specific sound environments. Derived from the correlation of these two methods, a series of indicators of noise annoyance are proposed, which entails the design of a noise annoyance indicator. Furthermore, the effects of this pollutant on psychological health and therefore in the intellectual development of students has been shown. First, an evaluation of attention and memory using standardized psychometric tests were performed and others designed for this particular study. Because it has been evidenced that the use of these psychometric tests are not very reliable, we sought to obtain another objective and reliable data to show the relationship between the negative influence of background noise on basic cognitive processes such as attention and memory. This was achieved by carrying out a study of the brain activity. To carry out this evaluation the electroencephalogram (EEG) was used as the main tool, focusing on the changes produced with and without exposure to background noise, specifically in the frequency bands related to basic cognitive processes such as attention and are memory. In this case the band theta (4-7 Hz) and beta band (13-30 Hz) were studied. The purpose of this thesis is to establish the bases for future studies that allow go deep in the study of the sound conditions in school environments, and enable the design of strategies and measures against noise and the correct evaluation of the effects of noise on aspects for improving the psychological quality of life and academic performance of students.

Diseño y aplicación de una metodología prospectiva para la determinación de los condicionantes futuros del crecimiento de los grandes buques portacontenedores

Durante las últimas décadas se observa una tendencia sostenida al crecimiento en las dimensiones de los grandes buques portacontenedores, que produce, que las infraestructuras portuarias y otras destinadas al tráfico de contenedores deban adaptarse para poder brindar los servicios correspondientes y mantenerse competitivas con otras para no perder el mercado. Esta situación implica importantes inversiones y modificaciones en los sistemas de transporte de contenedores por el gran volumen de carga que se debe mover en un corto periodo de tiempo, lo que genera la necesidad de tomar previsiones relacionadas con la probable evolución a futuro de las dimensiones que alcanzarán los grandes buques portacontenedores. En relación a los aspectos citados surge la inquietud de determinar los condicionantes futuros del crecimiento de los grandes buques portacontenedores, con una visión totalizadora de todos los factores que incidirán en los próximos años, ya sea como un freno o un impulso a la tendencia que se verifica en el pasado y en el presente. En consideración a que el tema a tratar y resolver se encuentra en el futuro, con un horizonte de predicción de veinte años, se diseña y se aplica una metodología prospectiva, que permite alcanzar conclusiones con mayor grado de objetividad sobre probables escenarios futuros. La metodología prospectiva diseñada, conjuga distintas herramientas metodológicas, cualitativas, semi-cuantitativas y cuantitativas que se validan entre sí. Sobre la base del pasado y el presente, las herramientas cuantitativas permiten encontrar relaciones entre variables y hacer proyecciones, sin embargo, estas metodologías pierden validez más allá de los tres a cuatro años, por los vertiginosos y dinámicos cambios que se producen actualmente, en las áreas política, social y económica. Las metodologías semi-cuantitativas y cualitativas, empleadas en forma conjunta e integradas, permiten el análisis de circunstancias del pasado y del presente, obteniendo resultados cuantitativos que se pueden proyectar hacia un futuro cercano, los que integrados en estudios cualitativos proporcionan resultados a largo plazo, facilitando considerar variables cualitativas como la creciente preocupación por la preservación del medio ambiente y la piratería. La presente tesis, tiene como objetivo principal “identificar los condicionantes futuros del crecimiento de los grandes buques portacontenedores y determinar sus escenarios”. Para lo cual, la misma se estructura en fases consecutivas y que se retroalimentan continuamente. Las tres primeras fases son un enfoque sobre el pasado y el presente, que establece el problema a resolver. Se estudian los antecedentes y el estado del conocimiento en relación a los factores y circunstancias que motivaron y facilitaron la tendencia al crecimiento de los grandes buques. También se estudia el estado del conocimiento de las metodologías para predecir el futuro y se diseña de una metodología prospectiva. La cuarta fase, denominada Resultados, se desarrolla en distintas etapas, fundamentadas en las fases anteriores, con el fin de resolver el problema dando respuestas a las preguntas que se formularon para alcanzar el objetivo fijado. En el proceso de esta fase, con el objeto de predecir probables futuros, se aplica la metodología prospectiva diseñada, que contempla el análisis del pasado y el presente, que determina los factores cuya influencia provocó el crecimiento en dimensiones de los grandes buques hasta la actualidad, y que constituye la base para emplear los métodos prospectivos que permiten determinar qué factores condicionarán en el futuro la evolución de los grandes buques. El probable escenario futuro formado por los factores determinados por el criterio experto, es validado mediante un modelo cuantitativo dinámico, que además de obtener el probable escenario futuro basado en las tendencias de comportamiento hasta el presente de los factores determinantes considerados, permite estudiar distintos probables escenarios futuros en función de considerar un cambio en la tendencia futura de los factores determinantes. El análisis del pasado indica que la tendencia al crecimiento de los grandes buques portacontenedores hasta el presente, se ha motivado por un crecimiento económico mundial que se tradujo en un aumento del comercio internacional, particularmente entre los países de Asia, con Europa y Estados Unidos. Esta tendencia se ha visto favorecida por el factor globalización y la acelerada evolución tecnológica que ha permitido superar los obstáculos que se presentaron. Es de destacar que aún en periodos de crisis económicas, con pronósticos de contracciones en el comercio, en los últimos años continuó la tendencia al crecimiento en dimensiones, en busca de una economía de escala para el transporte marítimo de contenedores, en las rutas transoceánicas. La investigación de la evolución de los grandes buques portacontenedores en el futuro, se efectúa mediante el empleo de una metodología prospectiva en la que el criterio experto se valida con un método cuantitativo dinámico, y además se fundamenta en una solida base pre-prospectiva. La metodología diseñada permite evaluar con un alto grado de objetividad cuales serán los condicionantes que incidirán en el crecimiento en tamaño de los grandes buques portacontenedores en el escenario con mayor probabilidad de acontecer en los próximos veinte años (2032), y también en otros escenarios que podrían presentarse en el caso de que los factores modifiquen su tendencia o bien se produzcan hechos aleatorios. El resultado se sintetiza en que la tendencia al crecimiento de los grandes buques portacontenedores en los próximos 20 años se verá condicionada por factores en relación a los conceptos de oferta (los que facilitan u obstaculizan la tendencia), demanda (los que motivan o impulsan la tendencia) y factores externos (los que desestabilizan el equilibrio entre oferta y demanda). La tendencia al crecimiento de los grandes buques portacontenedores se verá obstaculizada / limitada principalmente por factores relacionados a las infraestructuras, resultando los pasos y/o canales vinculados a las rutas marítimas, los limitantes futuros al crecimiento en dimensiones de los grandes buques portacontenedores; y la interacción buque / infraestructura (grúas) un factor que tenderá a obstaculizar esta tendencia de los grandes portacontenedores. El desarrollo económico mundial que estimula el comercio internacional y los factores precio del petróleo y condicionantes medioambientales impulsarán la tendencia al crecimiento de los grandes buques portacontenedores. Recent years have seen a sustained tendency towards the growth in the dimensions of large container ships. This has meant that port and other infrastructure used for container traffic has had to be adapted in order to provide the required services and to maintain a competitive position, so as not to lose market share. This situation implies the need for major investments in modifications to the container transport system, on account of the large volume of traffic to be handled in a short period of time. This in turn has generated a need to make provision for the probable future evolution of the ultimate dimensions that will be reached by large container ships. Such considerations give rise to the question of what are the future determinants for the growth of large container ships, requiring an overall vision of all the factors that will apply in future years, whether as a brake on or an incentive to the growth tendency which has been seen in the past and present In view of the fact that the theme to be dealt with and resolved relates to the future, with a forecasting horizon of some 20 years, a foresight methodology has been designed and applied so as to enable conclusions about probable future scenarios to be reached with a greater degree of objectivity. The designed methodology contains different methodological tools, both qualitative, semi-quantitative and quantitative, which are internally consistent. On the basis of past and present observations, the quantitative elements enable relationships to be established and forecasts to be made. Nevertheless such an approach loses validity more than three or four years into the future, on account of the very rapid and dynamic changes which may be seen at present in political, social and economic spheres. The semi-quantitative and qualitative methodologies are used coherently together and allow the analysis of past and present conditions, thus obtaining quantitative results which for short-term projections, which when integrated with the qualitative studies provide results for the long-term, facilitating the consideration of qualitative variables such as the increasing importance of environmental protection and the impact of piracy. The principal objective of the present thesis is "to identify the future conditions affecting the growth of large container ships and to determine possible scenarios". The thesis is structured in consecutive and related phases. The first three phases focus on the past and present in order to determine the problem to be resolved. The background is studied in order to establish the state of knowledge about the factors and circumstances which have motivated and facilitated the growth tendency for large container ships and the methodologies that have been used. In this way a specific foresight methodology is designed. The fourth phase, Results, is developed in distinct stages based on the previous phases, so as to resolve the problem posed and responding to the questions that arise. In this way the determined objective is reached. The fourth phase sees the application of the methodology that has been designed in order to predict posible futures. This includes analysis of the past and present factors which have caused the growth in the dimensions of large container ships up to the present. These provide the basis on which to apply the foresight methods which enable the future factors which will condition the development of such large container ships. The probable future scenarios are made up of the factors identified by expert judgement (using the Delphi technique) and validated by means of a dynamic quantitative model. This model both identifies the probable future scenarios based on past and present factors and enables the different future scenarios to be analysed as a function of future changes in the conditioning factors. Analysis of the past shows that the growth tendency up to the present for large container ships has been motivated by the growth of the world economy and the consequent increased international trade, especially between the countries of Asia with Europe and the United States. This tendency has been favoured by the trend towards globalization and by the rapid technical evolution in ship design, which has allowed the obstacles encountered to be overcome. It should be noted that even in periods of economic crisis, with an expectation for reduced trade, as experienced in recent years, the tendency towards increased ship dimensions has continued in search of economies of scale for the maritime transport of containers on transoceanic routes. The present investigation of the future evolution of large container ships has been done using a foresight methodology in which the expert judgement is validated by a dynamic quantitative methodology, founded on a firm pre-foresight analysis. The methodology that has been designed permits the evaluation, with a high degree of objectivity, of the future factors that will affect the growth of large container ships for the most probable scenario expected in the next 20 years (up to 2032). The evaluation applies also to other scenarios which may arise, in the event that their component factors are modified or indeed in the light of random events. In summary, the conclusión is that the tendency for growth in large container ships in the future 20 years will be determined by: factors related to supply, which slow or halt the tendency; factors related to demand, which encourage the tendency and finally, external factors which interrupt the equilibrium between supply and demand. The tendency for increasing growth in large container ships will be limited or even halted by factors related to infrastructure, including the natural and man-made straits and canals used by maritime transport. In addition the infrastructure required to serve such vessels both in port (including cranes and other equipment) and related transport, will tend to slow the growth tendency. The factors which will continue to encourage the tendency towards the growth of large container ships include world economic development, which stimulates international trade, and an increasing emphasis on environmental aspects.

Desarrollo de un modelo de formación del valor inmobiliario en áreas de crecimiento suburbano. Aplicación a la comarca de la Vega Baja del Segura en el litoral alicantino

Una de las principales líneas de investigación de la economía urbana es el comportamiento del mercado inmobiliario y sus relaciones con la estructura territorial. Dentro de este contexto, la reflexión sobre el significado del valor urbano, y abordar su variabilidad, constituye un tema de especial importancia, dada la relevancia que ha supuesto y supone la actividad inmobiliaria en España. El presente estudio ha planteado como principal objetivo la identificación de aquellos factores, ligados a la localización que explican la formación del valor inmobiliario y justifican su variabilidad. Definir este proceso precisa de una evaluación a escala territorial estableciendo aquellos factores de carácter socioeconómico, medioambiental y urbanístico que estructuran el desarrollo urbano, condicionan la demanda de inmuebles y, por tanto, los procesos de formación de su valor. El análisis se centra en valores inmobiliarios residenciales localizados en áreas litorales donde la presión del sector turístico ha impulsado un amplio. Para ello, el ámbito territorial seleccionado como objeto de estudio se sitúa en la costa mediterránea española, al sur de la provincia de Alicante, la comarca de la Vega Baja del Segura. La zona, con una amplia diversidad ecológica y paisajística, ha mantenido históricamente una clara distinción entre espacio urbano y espacio rural. Esta dicotomía ha cambiado drásticamente en las últimas décadas, experimentándose un fuerte crecimiento demográfico y económico ligado a los sectores turístico e inmobiliario, aspectos que han tenido un claro reflejo en los valores inmobiliarios. Este desarrollo de la comarca es un claro ejemplo de la política expansionista de los mercados de suelo que ha tenido lugar en la costa española en las dos últimas décadas y que derivado en la regeneración de un amplio tejido suburbano. El conocimiento del marco territorial ha posibilitado realizar un análisis de variabilidad espacial mediante un tratamiento masivo de datos, así como un análisis econométrico que determina los factores que se valoran positivamente y negativamente por el potencial comprador. Estas relaciones permiten establecer diferentes estructuras matemáticas basadas en los modelos de precios hedónicos, que permiten identificar rasgos diferenciales en los ámbitos económico, social y espacial y su incidencia en el valor inmobiliario. También se ha sistematizado un proceso de valoración territorial a través del análisis del concepto de vulnerabilidad estructural, entendido como una situación de fragilidad debida a circunstancias tanto sociales como económicas, tanto actual como de tendencia en el futuro. Actualmente, esta estructura de demanda de segunda residencia y servicios ha mostrado su fragilidad y ha bloqueado el desarrollo económico de la zona al caer drásticamente la inversión en el sector inmobiliario por la crisis global de la deuda. El proceso se ha agravado al existir un tejido industrial marginal al que no se ha derivado inversiones importantes y un abandono progresivo de las explotaciones agropecuarias. El modelo turístico no sería en sí mismo la causa del bloqueo del desarrollo económico comarcal, sino la forma en que se ha implantado en la Costa Blanca, con un consumo del territorio basado en el corto plazo, poco respetuoso con aspectos paisajísticos y medioambientales, y sin una organización territorial global. Se observa cómo la vinculación entre índices de vulnerabilidad y valor inmobiliario no es especialmente significativa, lo que denota que las tendencias futuras de fragilidad no han sido incorporadas a la hora de establecer los precios de venta del producto inmobiliario analizado. El valor muestra una clara dependencia del sistema de asentamiento y conservación de las áreas medioambientales y un claro reconocimiento de tipologías propias del medio rural aunque vinculadas al sector turístico. En la actualidad, el continuo descenso de la demanda turística ha provocado una clara modificación en la estructura poblacional y económica. Al incorporar estas modificaciones a los modelos especificados podemos comprobar un verdadero desmoronamiento de los valores. Es posible que el remanente de vivienda construida actualmente vaya dirigido a un potencial comprador que se encuentra en retroceso y que se vincula a unos rasgos territoriales ya no existentes. Encontrar soluciones adaptables a la oferta existente, implica la viabilidad de renovación del sistema poblacional o modificaciones a nivel económico. La búsqueda de respuestas a estas cuestiones señala la necesidad de recanalizar el desarrollo, sin obviar la potencialidad del ámbito. SUMMARY One of the main lines of research regarding the urban economy focuses on the behavior of the real estate market and its relationship to territorial structure. Within this context, one of the most important themes involves considering the significance of urban property value and dealing with its variability, particularly given the significant role of the real estate market in Spain, both in the past and present. The main objective of this study is to identify those factors linked to location, which explain the formation of property values and justify their variability. Defining this process requires carrying out an evaluation on a territorial scale, establishing the socioeconomic, environmental and urban planning factors that constitute urban development and influence the demand for housing, thereby defining the processes by which their value is established. The analysis targets residential real estate values in coastal areas where pressure from the tourism industry has prompted large-scale transformations. Therefore, the focal point of this study is an area known as Vega Baja del Segura, which is located on the Spanish Mediterranean coast in southern Alicante (province). Characterized by its scenic and ecological diversity, this area has historically maintained a clear distinction between urban and rural spaces. This dichotomy has drastically changed in past decades due to the large increase in population attributed to the tourism and real estate markets – factors which have had a direct effect on property values. The development of this area provides a clear example of the expansionary policies which have affected the housing market on the coast of Spain during the past two decades, resulting in a large increase in suburban development. Understanding the territorial framework has made it possible to carry out a spatial variability analysis through massive data processing, as well as an econometric analysis that determines the factors that are evaluated positively and negatively by potential buyers. These relationships enable us to establish different mathematical systems based on hedonic pricing models that facilitate the identification of differential features in the economic, social and spatial spheres, and their impact on property values. Additionally, a process for land valuation was established through an analysis of the concept of structural vulnerability, which is understood to be a fragile situation resulting from either social or economic circumstances. Currently, this demand structure for second homes and services has demonstrated its fragility and has inhibited the area’s economic development as a result of the drastic fall in investment in the real estate market, due to the global debt crisis. This process has been worsened by the existence of a marginal industrial base into which no important investments have been channeled, combined with the progressive abandonment of agricultural and fishing operations. In and of itself, the tourism model did not inhibit the area’s economic development, rather it is the result of the manner in which it was implemented on the Costa Brava, with a land consumption based on the short-term, lacking respect for landscape and environmental aspects and without a comprehensive organization of the territory. It is clear that the link between vulnerability indexes and property values is not particularly significant, thereby indicating that future fragility trends have not been incorporated into the problem in terms of establishing the sale prices of the analyzed real estate product in question. Urban property values are clearly dependent on the system of development and environmental conservation, as well as on a clear recognition of the typologies that characterize rural areas, even those linked to the tourism industry. Today, the continued drop in tourism demand has provoked an obvious modification in the populational and economic structures. By incorporating these changes into the specified models, we can confirm a real collapse in values. It’s possible that the surplus of already-built homes is currently being marketed to a potential buyer who is in recession and linked to certain territorial characteristics that no longer exist. Finding solutions that can be adapted to the existing offer implies the viability of renewing the population system or carrying out modifications on an economic level. The search for answers to these questions suggests the need to reform the development model, without leaving out an area’s potentiality.

Concept of project: learning lessons

The concept of Project encompasses a semantic disparity that involves all areas of professional and nonprofessional activity. In the engineering projects domain, and starting by the etymological roots of the terms, a review of the definitions given by different authors and their relation with sociological trends of the last decades is carried out. The engineering projects began as a tool for the development of technological ideas and have been improved with legal, economic and management parameters and recently with environmental aspects. However, the engineering projects involve people, groups, agents, organizations, companies and institutions. Nowadays, the social implications of projects are taken into consideration but the technology for social integration is not consolidated. This communication provides a new framework based on the experience for the development of engineering projects in the context of "human development", placing people in the center of the project

Facing the climate change challenges in the mining and mineral industry as providers of a sustainable manufacturing process

A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.

TITIM GIS-tool: A GIS-based decision support system for measuring the territorial impact of transport infrastructures

To achieve sustainability in the area of transport we need to view the decision-making process as a whole and consider all the most important socio-economic and environmental aspects involved. Improvements in transport infrastructures have a positive impact on regional development and significant repercussions on the economy, as well as affecting a large number of ecological processes. This article presents a DSS to assess the territorial effects of new linear transport infrastructures based on the use of GIS. The TITIM ? Transport Infrastructure Territorial Impact Measurement ? GIS tool allows these effects to be calculated by evaluating the improvement in accessibility, loss of landscape connectivity, and the impact on other local territorial variables such as landscape quality, biodiversity and land-use quality. The TITIM GIS tool assesses these variables automatically, simply by entering the required inputs, and thus avoiding the manual reiteration and execution of these multiple processes. TITIM allows researchers to use their own GIS databases as inputs, in contrast with other tools that use official or predefined maps. The TITIM GIS-tool is tested by application to six HSR projects in the Spanish Strategic Transport and Infrastructure Plan 2005?2020 (PEIT). The tool creates all 65 possible combinations of these projects, which will be the real test scenarios. For each one, the tool calculates the accessibility improvement, the landscape connectivity loss, and the impact on the landscape, biodiversity and land-use quality. The results reveal which of the HSR projects causes the greatest benefit to the transport system, any potential synergies that exist, and help define a priority for implementing the infrastructures in the plan

Factors impacting the market share of Construction and Demolition (C&D) Waste recycling solutions

Current EU Directives force the Member States to assure by 2020 that 70% of the Construction and Demolition (C&D) waste is recovered instead of landfilled. While some countries have largely achieved this target, others still have a long way to go. For better understanding the differences arising from local disparities, six factors related to technical, economic, legislative and environmental aspects have been identified as crucial influences in the market share of C&D waste recycling solutions. These factors are able to identify the causes that limit the recycling rate of a certain region. Moreover, progress towards an efficient waste management can vary through the improvement of a single factor. This study provides the background for further fine-tuning the factors and their combination into a mathematical model for assessing the market share of C&D recycling solutions.

Ajuste del modelo de Drucker Prager extendido para la simulación de la respuesta mecánica de un vertisol mediante el método de elementos finitos

La mecanización de las labores del suelo es la causa, por su consumo energético e impacto directo sobre el medio ambiente, que más afecta a la degradación y pérdida de productividad de los suelos. Entre los factores de disminución de la productividad se deben considerar la compactación, la erosión, el encostramiento y la pérdida de estructura. Todo esto obliga a cuidar el manejo agrícola de los suelos tratando de mejorar las condiciones del suelo y elevar sus rendimientos sin comprometer aspectos económicos, ecológicos y ambientales. En el presente trabajo se adecuan los parámetros constitutivos del modelo de Drucker Prager Extendido (DPE) que definen la fricción y la dilatancia del suelo en la fase de deformación plástica, para minimizar los errores en las predicciones durante la simulación de la respuesta mecánica de un Vertisol mediante el Método de Elementos Finitos. Para lo cual inicialmente se analizaron las bases teóricas que soportan este modelo, se determinaron las propiedades y parámetros físico-mecánicos del suelo requeridos como datos de entrada por el modelo, se determinó la exactitud de este modelo en las predicciones de la respuesta mecánica del suelo, se estimaron mediante el método de aproximación de funciones de Levenberg-Marquardt los parámetros constitutivos que definen la trayectoria de la curva esfuerzo-deformación plástica. Finalmente se comprobó la exactitud de las predicciones a partir de las adecuaciones realizadas al modelo. Los resultados permitieron determinar las propiedades y parámetros del suelo, requeridos como datos de entrada por el modelo, mostrando que su magnitud está en función su estado de humedad y densidad, además se obtuvieron los modelos empíricos de estas relaciones exhibiendo un R2>94%. Se definieron las variables que provocan las inexactitudes del modelo constitutivo (ángulo de fricción y dilatancia), mostrando que las mismas están relacionadas con la etapa de falla y deformación plástica. Finalmente se estimaron los valores óptimos de estos ángulos, disminuyendo los errores en las predicciones del modelo DPE por debajo del 4,35% haciéndelo adecuado para la simulación de la respuesta mecánica del suelo investigado. ABSTRACT The mechanization using farming techniques is one of the main factors that affects the most the soil, causing its degradation and loss of productivity, because of its energy consumption and direct impact on the environment. Compaction, erosion, crusting and loss of structure should be considered among the factors that decrease productivity. All this forces the necessity to take care of the agricultural-land management trying to improve soil conditions and increase yields without compromising economic, ecological and environmental aspects. The present study was aimed to adjust the parameters of the Drucker-Prager Extended Model (DPE), defining friction and dilation of soil in plastic deformation phase, in order to minimize the error of prediction when simulating the mechanical response of a Vertisol through the fine element method. First of all the theoretic fundamentals that withstand the model were analyzed. The properties and physical-mechanical parameters of the soil needed as input data to initialize the model, were established. And the precision of the predictions for the mechanical response of the soil was assessed. Then the constitutive parameters which define the path of the plastic stress-strain curve were estimated through Levenberg-Marquardt method of function approximations. Lastly the accuracy of the predictions from the adequacies made to the model was tested. The results permitted to determine those properties and parameters of the soil, needed in order to initialize the model. It showed that their magnitude is in function of density and humidity. Moreover, the empirical models from these relations were obtained: R2>94%. The variables producing inaccuracies in the constitutive model (angle of repose and dilation) were defined, and there was showed that they are linked with the plastic deformation and rupture point. Finally the optimal values of these angles were established, obtaining thereafter error values for the DPE model under 4, 35%, and making it suitable for the simulation of the mechanical response of the soil under study.