Fundamentos antropológicos de las tecnologías biomédicas no terapéuticas

The important developments in technology in all areas of human life have generated high expectations and hopes with regard to the health sector. Science and technology have favored the development of incredible therapeutic treatments to help resolve numerous problems relating to illness and disability. Nonetheless, many developments in the therapeutic realm have given rise to discussions over the possibility of whether this same scientific and technological progress could be beneficial even for those who may not be sick. One may ask: why not apply the same knowledge and technology used for treatment of illness for conditions where therapy is not necessary, but there is a desire to care for, improve and enhance human person? These new horizons offered by biomedical technologies undoubtedly express a deep desire of every person for health, happiness, and a long life. In order to offer a response to these questions, current biomedical technologies and those in development offer a wide range of possibilities. Therefore, in this investigation we attempt to identify and define four areas of non-therapeutic treatment: illness prevention, health promotion, improving human nature, and human enhancement. These four areas, which do not directly regard illness, give rise to a series of questions, which range from those regarding the meaning of health and illness to those concerning anthropological questions, such as situations and conditions that must be taken into account so human dignity is respected. The treatment, improvement and enhancement of the human being imply clarifying in scientific and technological terms the truth and meaning of the human person as such. This research identifies and looks at the relationship between the four anthropological cornerstones which non-therapeutic biomedical technologies should be based upon so as not to impact or violate the dignity of the human person. This research presents the anthropological boundaries which non-therapeutic biomedical technologies should take into consideration so as not to alter or violate the dignity of the human person. At the same time, the research proposes an anthropological foundation on which to build a code of ethics for non-therapeutic biomedical technologies. El gran desarrollo de las tecnologías en todos los ámbitos de la vida del hombre ha generado una gran expectativa y esperanza en lo que se refiere a la salud. Ciencia y técnica están aportando grandes beneficios en materia terapéutica, ayudando a resolver muchos problemas concernientes a la enfermedad y a la discapacidad. Pero este desarrollo que se ha producido en el ámbito terapéutico nos conduce a la formulación de preguntas sobre las posibilidades que esos avances técnico-científicos pueden aportar en beneficio del hombre, cuando no se encuentra enfermo: ¿por qué no pueden aplicarse los conocimientos y tecnologías usados en terapia a un ámbito diferente, no terapéutico, con el fin de mantener, mejorar o incluso potenciar al hombre? Ciertamente los nuevos horizontes que abren las Tecnologías Biomédicas encuentran repercusión en el deseo de bienestar, de felicidad e incluso de prolongación de la vida presente en todos los hombres. Para responder a esta pregunta las Tecnologías Biomédicas han desarrollado y están desarrollando una gama muy amplia de posibilidades. En este trabajo intentamos organizar en cuatro áreas los conceptos de los tratamientos no-terapéuticos: prevención de la enfermedad, promoción de la salud, mejoramiento de la naturaleza humana y potenciación del hombre. Estas cuatro áreas, que no se refieren directamente a la enfermedad, generan una serie de interrogantes que van desde las preguntas sobre el significado de salud y enfermedad, hasta las cuestiones antropológicas relativas a la posibilidad y las condiciones que se han de dar para que tales acciones respeten la dignidad humana. Cuidar, mejorar y potenciar al hombre implica que los objetivos de la ciencia y de la técnica mantengan siempre claros los valores y la realidad del hombre en cuanto tal. ... Este Trabajo de Investigación presenta los límites antropológicos dentro de los cuales deben moverse las Tecnologías Biomédicas no-terapéuticas para no alterar el ser ni menoscabar la dignidad del hombre. Y ofrece los fundamentos antropológicos sobre los cuales se pueda construir un código ético y deontológico para las Tecnologías Biomédicas no-terapéuticas.

Obtención de clones de alcornoque (Quercus suber L.) mediante embriogénesis somática: aplicación de medios líquidos y biorreactores en la sincronización de los procesos de desarrollo y maduración de los embriones

El alcornoque tiene un gran valor ambiental, como integrante de los ecosistemas forestales mediterráneos, e interés comercial por el valor de la bellota (alimentación del cerdo ibérico), el carbón, la madera y sobre todo por las aplicaciones industriales del corcho. Las posibilidades de mejora genética del alcornoque, como las de otras especies forestales, están limitadas por sus largos ciclos reproductivos y porque su propagación vegetativa mediante estaquillado solo es posible en estados muy juveniles. Por ello este sistema de propagación tiene muy poca, o ninguna, utilidad práctica en la mejora genética. La embriogénesis somática es la vía más apropiada para la clonación de muchas especies forestales y ha hecho posible el desarrollo a gran escala de plantaciones multivarietales de coníferas. En alcornoque es posible la regeneración completa de árboles adultos mediante embriogénesis somática. Con los protocolos actuales (en medio semisólido), los embriones se generan formando acúmulos y en la fase de multiplicación conviven embriones en distintos estados de desarrollo. Es un sistema asincrónico, con baja eficacia para la propagación en masa, que no elimina completamente las dificultades para el desarrollo de programas de mejora genética del alcornoque. En otras especies la utilización de medios líquidos ha mejorado: la sincronización, productividad de los cultivos, el manejo y reducido los costes de producción. Por ello el desarrollo de suspensiones embriogénicas de alcornoque se plantea como una vía para aumentar la eficacia de la propagación clonal a gran escala. En la presente tesis se desarrollan cultivos embriogénicos de alcornoque en medio líquido. El capítulo 3 aborda el establecimiento y mantenimiento de suspensiones, el capítulo 4 el desarrollo de una fase de proliferación en medio líquido y el capítulo 5 la utilización de sistemas de cultivo en medio líquido, estacionarios y de inmersión temporal, como vía para favorecer la maduración de los embriones somáticos. Para iniciar los cultivos en medio líquido se emplearon agregados de embriones tomados de la fase de proliferación en medio semisólido. Cuando estos agregados se inocularon directamente en medio líquido no se logró el establecimiento de las suspensiones. El establecimiento se consiguió empleando como inóculo las células y Resumen pequeños agregados embriogénicos, de tamaño comprendido entre 41 y 800 μm, desprendidas por agitación breve de los agregados de embriones. El mantenimiento se logró inoculando en baja densidad masas embriogénicas compactas de tamaño comprendido entre 0,8 y 1,2 mm. Estas suspensiones, muy heterogéneas, mantuvieron su capacidad de proliferación y de regeneración de embriones al menos durante diez subcultivos consecutivos. El protocolo de iniciación y mantenimiento, desarrollado inicialmente con un solo genotipo, fue eficaz cuando se probó sobre otros 11 genotipos de alcornoque. En la fase de proliferación se ensayaron tres tipos de envase y tres velocidades de agitación. La combinación envase × velocidad determinó el intercambio gaseoso, la disponibilidad de oxígeno y el estrés hidrodinámico. Los agregados embriogénicos de alcornoque crecieron incluso en condiciones de hipoxia no siendo la disponibilidad de oxígeno un factor limitante del crecimiento para tasas de trasferencia de oxígeno comprendidas entre 0,11 h-1 y 1,47 h-1. Por otra parte la producción de biomasa creció con el estrés hidrodinámico para valores de índice de cizalladura inferiores a 5 x 10-3 cm min-1. La mayor producción de biomasa se obtuvo con matraces Erlenmeyer de 100 ml y alta velocidad de agitación (160 rpm) mientras que la diferenciación de embriones se vio favorecida por bajas velocidades de agitación (60 rpm) asociadas con bajas disponibilidades de oxígeno. La posibilidad de madurar embriones de alcornoque en medio líquido se estudió utilizando sistemas de inmersión permanente y sistemas de inmersión temporal. En inmersión permanente no se diferenciaron embriones cotiledonares (posiblemente por hiperhidricidad). Los sistemas de inmersión temporal permitieron obtener embriones maduros en estado cotiledonar y capaces de regenerar plantas in vitro. Concentraciones de sacarosa superiores a 60 g l-1 y frecuencias de inmersión iguales o inferiores a una diaria, tuvieron efectos negativos para el desarrollo de los embriones somáticos. En los sistemas de inmersión temporal los parámetros físico-químicos del medio de cultivo se mantuvieron estables y no se observó ninguna limitación de nutrientes. No obstante, estos sistemas se vieron afectados por la evaporación que generó el flujo de aire necesario para desplazar el líquido en cada periodo de inmersión. Abstract ABSTRACT Cork oak is one of the most important tree species of the Mediterranean ecosystem. Besides its high environmental value has a great economic interest due to the sustainable production of acorns (to feed the Iberian pig) charcoal, timber and cork, which is a renewable natural product with various technological applications. As happens with other forest species, cork oak genetic improvement programs are limited by their long life cycles and because vegetative propagation by cuttings it´s only possible in very juvenile plants. Hence this propagation system is useless or has little practical use for breeding cork oak. Plant regeneration by somatic embryogenesis is the most suitable way for cloning many forest species, and it is the enabling technology which has allowed the establishment of large-scale conifer multi-varietal plantations. Clonal plant regeneration of mature cork oak trees can be achieved through somatic embryogenesis. Somatic embryos at different stages of development and forming clusters are produced during the multiplication phase with current protocols (using semisolid medium). This is an asynchronous low-efficient process not suitable for mass propagation, and therefore it does not solve the difficulties presented by cork oak breeding programs. Culture in liquid medium has been used with other species to improve: synchronization, yield, handling, and to reduce production costs. Thus the development of cork oak embryogenic suspension cultures is envisaged as a way to increase the efficiency of large scale clonal propagation. The thesis herein develops cork oak embryogenic cultures in liquid medium. In chapter 3 establishment and maintenance of suspension cultures are developed, chapter 4 studies proliferation phase in liquid medium and chapter 5 considers the use of different systems of culture in liquid medium, both stationary and temporary immersion, as a way to promote somatic embryos maturation. Clusters of embryos taken from proliferating cultures on semisolid medium were used to initiate the cultures in liquid medium. When these clusters were inoculated directly in liquid medium establishment of suspension cultures was not executed. However using, as initial inoculum, cells and cell aggregates with a size between 41 and 800 μm detached from these clusters of embryos, subjected to a brief shaking, suspension cultures could be established. Suspension maintenance was achieved by inoculating compact embryogenic Abstract clumps with a size between 0.8 and 1.2 mm at low density. The suspension cultures, very heterogeneous, retained both their proliferation and embryo regeneration capacity for at least ten consecutive subcultures. The initiation and maintenance protocol, initially developed with a single genotype, was effective when tested on 11 additional genotypes of cork oak. In proliferation phase three types of vessels and three different levels of agitation were assayed. The combination vessel × orbiting speed determined gas exchange, oxygen availability and hydrodynamic stress. Cork oak embryogenic aggregates grew even under hypoxia conditions; oxygen availability at transfer rates between 0.11 and 1.47 h-1 was not a limiting factor for growth. Furthermore the biomass production was increased with hydrodynamic stress when shear rate values were of less than 5 x 10-3 cm min-1. The highest biomass production was obtained with 100 ml Erlenmeyer flask and high stirring speed (160 rpm) while the differentiation of embryos was favored by low agitation speeds (60 rpm) associated with low oxygen availability. The possibility to mature cork oak somatic embryos in liquid medium was studied using both permanent immersion systems and temporary immersion systems. Cotyledonary embryos did not differentiate in permanent immersion conditions (probably due to hyperhydricity). Temporary immersion systems allowed obtaining mature cotyledonary embryos, which were able to regenerate plants in vitro. Sucrose concentrations above 60 g l-1 and immersion frequencies equal to or lower than one each 24 h had negative effects on somatic embryo development. Physicochemical parameters of the culture medium in temporary immersion systems were stable and showed no limitation of nutrients. However, these systems were affected by the evaporation generated by the airflow necessary to relocate the medium at each immersion period.

Bridge windshield design to avoid aeroelastic phenomena

Since in 1940 the Tacoma Narrows Bridge was destroyed by the wind, aeroelastic instabilities have been recognized as one of the most challenging aspects of bridge design. They can produce long-term fatigue failure through vortex induced vibrations, or sudden collapse through self-excited flutter. These vibrations may also cause discomfort for the users and temporary closure of the bridge. Wind tunnel studies are a very helpful tool to understand these phenomena. By means of them, the critical wind speed at which vortex induced vibration and flutter appear can be precisely determined and the design of the bridge can be reconsidered in the early steps of the process. In this paper, an optimum design of the bridge section is sought. One of the most relevant parameters that influence the stability of a certain deck is the porosity of the barriers. Section model tests have been carried out to find whether an optimum value of the porosity of the barrier exists. This value or range of values must present neither vortex induced vibration nor flutter.

Teoría y práctica de la restauración de la Mezquita-Catedral de Córdoba durante el siglo XX

La Mezquita-Catedral de Córdoba es un edificio vivo. Un edificio que ha sido transformado sucesivamente por hombres de razas, culturas y religiones distintas durante sus más de 1.200 años de vida y que, a pesar de ello, no ha dejado de estar en uso ni uno solo de esos días de esa larga vida. De esta forma, el edificio se muestra ante el visitante como un complejo objeto arquitectónico, resultado de una continua transformación. La capacidad de la transformación de los edificios es algo inherente a su propia condición arquitectónica, no es un hecho exclusivo de la Mezquita-Catedral. Sin embargo, en este edificio esa transformación se produce con una gran intensidad y sin pérdida de su autenticidad. Tradicionalmente, los edificios se han adaptado a los nuevos requerimientos de cada época en un proceso que ha buscado en el propio edificio las leyes o principios que habían de regir la intervención. De esta forma, tanto las sucesivas ampliaciones de la Mezquita de Abd al-Rahman I como las siguientes intervenciones cristianas debieron asumir lo preexistente como material de trabajo. Así, los arquitectos del califa al-Hakam II dialogaron con sus antecesores complejizando el espacio que recibieron, así como los Hernán Ruiz consiguieron un nuevo organismo resultante de la introducción de su arquitectura luminosa en la trama hispanomusulmana. El siglo XIX confirmó el deseo por descubrir las huellas de un pasado esplendoroso que la intervención barroca había silenciado bajo un tratamiento homogéneo del espacio. La recuperación de esas huellas supuso, hace exactamente dos siglos, el inicio de la última gran etapa en la transformación del edificio, la de la restauración. La fábrica es considerada como objeto a conservar y los esfuerzos desde ese momento se centraron en la recuperación de la arquitectura omeya latente. De este modo, la práctica de la restauración como disciplina se encontró absolutamente influenciada por la Arqueología como única fuente de conocimiento. Las intervenciones buscaban lo original como modo de recuperar espacial y formalmente aquel pasado, concentrándose en los lugares del edificio considerados como esenciales. La declaración del edificio como monumento nacional en 1882 propició que el Estado se hiciera cargo de su mantenimiento y conservación, sustituyendo en esa tarea a los Obispos y Cabildos del siglo XIX, que tuvieron un entendimiento muy avanzado para su época. La llegada del arquitecto Velázquez Bosco en las últimas décadas del siglo XIX supuso un cambio trascendental en la historia del edificio, puesto que recibió un edificio con importantes deterioros y consiguió poner las bases del edificio que hoy contemplamos. El empeño por la recuperación material y espacial devolvió a la Mezquita-Catedral buena parte de su imagen original, reproduciendo con exactitud los modelos hallados en las exploraciones arqueológicas. La llegada de Antonio Flórez tras la muerte de Velázquez Bosco supuso la traslación al edificio del debate disciplinar que se desarrolló en las dos primeras décadas del siglo XX. Flórez procuró un nuevo entendimiento de la intervención, considerando la conservación como actuación prioritaria. En 1926 el Estado reformó la manera en que se atendía al patrimonio con la creación de un sistema de zonas y unos arquitectos a cargo de ellas. La existencia de un nuevo marco legislativo apuntaló esa nueva visión conservativa, avalada por la Carta de Atenas de 1931. Este modelo restauración científica huía de la intervención en estilo y valoraba la necesidad de intervenir de la manera más escueta posible y con un lenguaje diferenciado, basándose en los datos que ofrecía la Arqueología. Por tanto, se continuaba con la valoración del edificio como documento histórico, buscando en este caso una imagen diferenciada de la intervención frente a la actitud mimética de Velázquez. Resulta destacable la manera en la que el historiador Manuel Gómez-Moreno influyó en varias generaciones de arquitectos, arqueólogos e historiadores, tanto en el entendimiento científico de la restauración como en la propia estructura administrativa. La labor desarrollada en el edificio por José Mª Rodríguez Cano primero y Félix Hernández a continuación estuvo influida de manera teórica por el método de Gómez-Moreno, aunque en muchos aspectos su labor no representó una gran diferencia con lo hecho por Velázquez Bosco. La búsqueda de lo original volvió a ser recurrente, pero la carga económica del mantenimiento de un edificio tan extenso conllevó la no realización de muchos de los proyectos más ambiciosos. Esta obsesiva búsqueda de la imagen original del edificio tuvo su última y anacrónica etapa con la intervención de la Dirección General de Arquitectura en los 70. Sin embargo, el agotamiento del modelo científico ya había propiciado un nuevo escenario a nivel europeo, que cristalizó en la Carta de Venecia de 1964 y en una nueva definición del objeto a preservar, más allá del valor como documento histórico. Esta nueva posición teórica tuvo su traslación al modelo restaurador español en el último cuarto de siglo XX, coincidiendo con la Transición. El arquitecto Dionisio Hernández Gil defendió una interpretación distinta a la de los arqueólogos y de los historiadores, que había prevalecido durante todo el siglo. En opinión de Hernández Gil, los problemas de intervención debían enfocarse fundamentalmente como problemas de Arquitectura, abandonando la idea de que solamente podían ser resueltos por especialistas. Esta convicción teórica fue defendida desde la nueva Administración y deparó la utilización de unos criterios de intervención particularizados, provenientes del análisis multifocal de cada situación y no sólo desde el valor de los edificios como documentos históricos. Y este cambio tuvo su traslación a la Mezquita-Catedral con la práctica de Gabriel Ruiz Cabrero y Gabriel Rebollo. En consecuencia con esa nueva perspectiva, aceptaron el edificio que recibieron, sustituyendo la búsqueda de aquella página original por la aceptación de cada una de las páginas de su historia y el respeto a las técnicas constructivas del pasado. La búsqueda de soluciones específicas desde el propio objeto arquitectónico significó la renovada atención a la potente estructura formal-constructiva como origen de toda reflexión. Considerar la Mezquita-Catedral en primer lugar como Arquitectura implicaba la atención a todo tipo de factores además de los históricos, como medio para preservar su autenticidad. Esta tesis pretende demostrar que la práctica de la restauración realizada en la Mezquita-Catedral a lo largo del siglo XX ha evolucionado desde la búsqueda de lo original hasta la búsqueda de lo auténtico, como reflejo de una visión basada en lo arqueológico frente a una renovada visión arquitectónica más completa, que incluye a la anterior. La consideración de la intervención en este edificio como otra página más de su historia y no como la última, significa la reedición de un mecanismo recurrente en la vida del edificio y un nuevo impulso en ese proceso de continua transformación. ABSTRACT The Mosque-Cathedral of Cordoba is a living building. A building transformed by men of different races, cultures and religions during more than 1.200 years old and that, nevertheless, it has continued to be in use all days in that long life. Thus, the building shows to the visitor as a complex architectural object, the result of continuous transformation. This transformation capacity of the buildings is inherent in their own architectural condition, it’s not an exclusive fact of the Mosque-Cathedral. However, in this building that transformation happens with a great intensity, without losing their authenticity. Traditionally, buildings have been adapted to the new requirements of times in a process that looked for laws or principles in order to guide the intervention. Thus, both the successive enlargements of the Mosque of Abd al-Rahman and Christian interventions must assume the preexistence as a working material. So, the architects of the caliph al-Hakam II spoke to their predecessors, complexing the receiving space, as well as Hernan Ruiz got a new organism as result the introduction of his luminous architecture into hispanic-muslim weft. The nineteenth century confirmed the desire to discover the traces of a glorious past that Baroque intervention had silenced, under a uniform space treatment. Exactly two centuries ago, the recovery of these traces meant the start of the last major phase in the transformation of the building: the restoration. The building was considered subject to conserve and since then, efforts focused on the recovery of latent Umayyad architecture. Thus, the practice of restoration as a discipline was absolutely influenced by Archaeology as the only source of knowledge. Interventions were seeking the original as the way to recover that past in a space and formal way, concentrating on essential sites of the building. The statement as a national monument in 1882 prompted the State take charge of its maintenance and preservation, replacing to the nineteenth century Bishops and Cabildos, which had a very advanced understanding for that time. The arrival of the architect Velazquez Bosco in the last decades of the nineteenth century involved a momentous change in the history of the building, since he received a building with significant damage and he achieved the foundations of the building that we can see today. Efforts to a material and space recover returned the Mosque-Cathedral to its original image, accurately reproducing the models found in archaeological explorations. The arrival of Antonio Florez after Velazquez’s death involved the translation of discipline debate, which was developed in the first two decades of the twentieth century. Florez tried a new understanding of the intervention, considering conservation as a priority action. In 1926, the State reformed the way in which heritage was attended, creating a zones system with a few architects in charge of them. The existence of a new legislative framework, underpinned this new conservative vision, supported by the Athens Charter of 1931. This scientific restoration model fleeing from intervention in style and it appreciated the need to intervene in the most concise way, with a distinct language based on the data offered by Archaeology. Therefore, it continued with the appraisement of the building as a historical document, seeking in this case a differentiated image of intervention, against Velazquez mimetic attitude. It is remarkable the way in which the historian Manuel Gomez-Moreno influenced several generations of architects, archaeologists and historians, both in the scientific understanding of the restoration and the administrative structure. The work of Jose Maria Rodriguez Cano first and then Felix Hernandez was theoretically influenced by the Gomez-Moreno’s method, although in many respects their work did not represent a great difference to Velazquez Bosco. The search of the original returned to recur, but the economic charge of maintaining such a large building led to the non-realization of many of the most ambitious projects. This obsessive search for the original image of the building had its last and anachronistic stage with the intervention of the Department of Architecture at 70’s. However, the exhaustion of the scientific model had already led to a new scenario at European level, which crystallized in the Venice Charter of 1964 and a new definition of the object to be preserved beyond the value as a historical document. This new theoretical position had its translation to Spanish restaurateur model in the last quarter of the twentieth century, coinciding with the Transition. The architect Dionisio Hernandez Gil defended a different interpretation from archaeologists and historians, that had prevailed throughout the century. According to Hernandez Gil, the problems of intervention should focus primarily as architectural issues, abandoning the idea that they could only be determined by specialist. This theoretical conviction was defended from the new administration and led to the use of particularized criteria, from a multifocal analysis of each situation. And this change had its translation to the Mosque with the practice of Gabriel Ruiz Cabrero and Gabriel Rebollo. Consistent with this new perspective, they accepted the receiving building, replacing the search on original page for acceptance of all historical pages and respecting the constructive techniques of the past. The search for specific solutions from the architectural object meant the renewed attention to the powerful formal-constructive structure as the origin of all thought. Consider the Mosque-Cathedral as Architecture, involved the attention to all kinds of factors in addition to the historical, as a means to preserve its authenticity. This thesis aims to demonstrate that the practice of restoration in the Mosque-Cathedral throughout the twentieth century has evolved from the search of the original to the search for the authentic, reflecting a vision based on the archaeological against a renewed more complete architectural vision, including the above. Consideration of intervention in this building as another page in its history and not the last one, means the reissue of an own mechanism and a new impetus in that continuous transformation process.

The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens

Fastener holes in aeronautical structures are typical sources of fatigue cracks due to their induced local stress concentration. A very efficient solution to this problem is to establish compressive residual stresses around the fastener holes that retard the fatigue crack nucleation and its subsequent local propagation. Previous work done on the subject of the application of LSP treatment on thin, open-hole specimens [1] has proven that the LSP effect on fatigue life of treated specimens can be detrimental, if the process is not properly optimized. In fact, it was shown that the capability of the LSP to introduce compressive residual stresses around fastener holes in thin-walled structures representative of typical aircraft constructions was not superior to the performance of conventional techniques, such as cold-working.

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented

Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components

•Introduction •Process Experimental Setup •Experimental Procedure •Experimental Results for Al2024 - T351, Ti6Al4V and AISI 316L - Surface Roughness and Compactation - Residual stresses - Tensile Strength - Fatigue Life •Discussion and Outlook - Prospects for technological applications of LSP

Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing

Laser shock processing (LSP) is being increasingly applied as an effective technology for the improvement of metallic materials mechanical and surface properties in different types of components as a means of enhancement of their corrosion and fatigue life behavior. As reported in previous contributions by the authors, a main effect resulting from the application of the LSP technique consists on the generation of relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Additional results accomplished by the authors in the line of practical development of the LSP technique at an experimental level (aiming its integral assessment from an interrelated theoretical and experimental point of view) are presented in this paper. Concretely, follow-on experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (especially Al and Ti alloys characteristic of high reliability components in the aerospace, nuclear and biomedical sectors) under different LSP irradiation conditions are presented along with a practical correlated analysis on the protective character of the residual stress profiles obtained under different irradiation strategies. Additional remarks on the improved character of the LSP technique over the traditional “shot peening” technique in what concerns depth of induced compressive residual stresses fields are also made through the paper

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Evolution of session RPE and fatigue during a long term nutritional intervention in one professional basketball player

Some evidence shows that the rate of perceived exertion of one session (RPE-S) and fatigue (Fat) of athletes can be decreased by the intake of carbohydrates (HCO) during exercise. However, it is well known that professional athletes do not meet nutritional recommendations (NR) but a long term nutritional intervention (NI) can improve their dietary intake (DI). What is not known is whether these long-term changes in DI can influence RPE-S and Fat of training. Our aim was to conduct a long term NI to adapt the DI of one professional basketball player to current NR and evaluate the influence of these changes on long-term RPE and Fat.

Long-term foliar persistence and efficacy of spinosad against beet armyworm under greenhouse conditions.

BACKGROUND: The immediate lethality caused by spinosad has been widely studied on Spodoptera exigua (H ¿ ubner). However, long-term effects can also provide valuable information on insecticide toxic action. Here, the persistence of spinosad on Capsicum annuum L. foliage and the lethal and sublethal effects of greenhouse-aged foliar residues of this insecticide on third instars of S. exigua are reported. RESULTS: Foliage was collected at 0, 3, 5, 10, 20, 30, 40 and 50 days after application, and spinosad residues were measured. Residues decreased over time according to first-order kinetics. The average rate constant and half-life of disappearance were 4.44×10?3 and156 daysand5.80×10?3 and120 days for60and120 mg L?1 respectively. Larval mortalitygradually decreased, corresponding to the residues, but was still appreciable (35 and 65% for 60 and 120 mg L?1 respectively) when the larvae were fed with foliage collected 50 days after treatment. Subsequently, pupal development was reduced and varied between 20 and 60% and between 21 and 41% for 60 and 120 mg L?1, respectively, in all ages of leaf residues that were bioassayed. At all time points, the consumption rate by the larvae was reduced between 62 and 84% for both concentrations that were bioassayed. CONCLUSION: It is concluded that, under the present greenhouse conditions, the degradation of spinosad was slower than that reported by other authors in the field, and, because of that, its residues could cause lethal and sublethal effects to S. exigua larvae.

Evaluation of the reliability of commercial concentrator triple-junction solar cells by means of accelerated life tests (ALT)

A temperature accelerated life test on commercial concentrator lattice-matched GaInP/GaInAs/Ge triple-junction solar cells has been carried out. The solar cells have been tested at three different temperatures: 119, 126 and 164 °C and the nominal photo-current condition (820 X) has been emulated by injecting current in darkness. All the solar cells have presented catastrophic failures. The failure distributions at the three tested temperatures have been fitted to an Arrhenius-Weibull model. An Arrhenius activation energy of 1.58 eV was determined from the fit. The main reliability functions and parameters (reliability function, instantaneous failure rate, mean time to failure, warranty time) of these solar cells at the nominal working temperature (80 °C) have been obtained. The warranty time obtained for a failure population of 5 % has been 69 years. Thus, a long-term warranty could be offered for these particular solar cells working at 820 X, 8 hours per day at 80 °C.

Influencia de un programa de ejercicio aeróbico en la calidad de vida de pacientes afectadas por cáncer de mama = Influence of an aerobic exercise program on breast cancer patients’ quality of life

INTRODUCCIÓN Actualmente las supervivientes de cáncer de mama viven durante más tiempo. Sin embargo, los tratamientos utilizados presentan importantes efectos secundarios que afectan y marcan su calidad de vida. Numerosos estudios han mostrado que el ejercicio es una herramienta apta, segura y efectiva reduciendo algunos de estos efectos secundarios y, en suma, mejorando la calidad de vida de estas pacientes, aspecto que presenta al ejercicio físico como una intervención integral para ellas. Por el contrario, se ha observado que las supervivientes de cáncer de mama reducen la cantidad de ejercicio que realizan después de dichos tratamientos. Por ello, el objetivo de este proyecto es examinar los efectos de un programa integral de ejercicio en la calidad de vida y la cantidad de ejercicio físico que realizan las pacientes con cáncer de mama en su tiempo, tras finalizar sus tratamientos. MATERIAL Y MÉTODOS Se diseñó un Ensayo Clínico Aleatorizado. Noventa pacientes diagnosticadas de cáncer de mama en estadios tempranos que habían terminado sus tratamientos de radioterapia y quimioterapia recientemente, fueron reclutadas por la Universidad Politécnica de Madrid, desde enero de 2013 hasta junio de 2014. Las pacientes fueron aleatorizadas tras las mediciones iniciales al grupo control (tratamientos habituales) o grupo intervención, durante tres meses. La intervención consistió en 24 clases de ejercicio combinando práctica aeróbica y de fuerza con el fin de reducir los efectos secundarios de dichos tratamientos. La calidad de vida, la cantidad de ejercicio físico realizado en tiempo de ocio, VO2max, la fuerza, la movilidad articular del hombro, la fatiga, la depresión y la ansiedad fueron medidos al inicio y después de los tres meses en todos los pacientes. RESULTADOS Un total de 89 pacientes con una media de 49.06±8.75 de edad fueron finalmente analizadas. El grupo intervención (n=44) mostraron significativamente mejores resultados en calidad de vida (p=0.0001; d=0.85), cantidad de ejercicio en tiempo de ocio (p=0.0001; d=2.77), en variables de la composición corporal, en variables físicas y en variables psicológicas comparado con el grupo control (n=45). Además, se observó una correlación significativa entre la calidad de vida y el ejercicio realizado en tiempo de ocio en el grupo intervención (r= 0.58; p=0.001), que no fue patente en el grupo control. Se observaron cambios significativos en el grupo de intervención relativos a la composición corporal, con aumento de la masa muscular (p=0.001) y reducción de la masa grasa (p=0.0001). Tanto las variables físicas como psicológicas también mostraron diferencias significativas a favor al grupo de intervención en las comparaciones entre grupos. CONCLUSIONES Según estos resultados, un programa de ejercicio físico específico es una intervención integral que mejora los hábitos y la calidad de vida de las supervivientes de cáncer de mama, lo que reduce determinados efectos secundarios de los tratamientos y aumenta la salud física y psicológica general de estas mujeres. Este tipo de intervenciones pude ser una herramienta barata y efectiva para ofrecer a los pacientes, integrada en los tratamientos habituales. ABSTRACT INTRODUCTION It is well known that breast cancer survivors are living longer. However, breast cancer treatments present serious side effects, which could affect breast cancer survivors’ (BCS) health and quality of life (QoL). Exercise has been presented as a feasible, safe and effective tool in reducing some of these side effects and to improve survivors’ QoL, acting as an integrative treatment for them, although it has been observed that BCS reduce their leisure time exercise (LTE) levels. Therefore, the aim of this study was to examine the effects of an integrative exercise program in QoL and LTE in BCS after the completion of their adjuvant treatment. MATERIAL AND METHODS A randomized controlled trial (RCT) was designed. Ninety patients diagnosed with an early stage of breast cancer and who recently finished chemotherapy and radiotherapy treatments were recruited by the Technical University of Madrid from January 2013 to June 2014. Patients were randomized after baseline assessments to the intervention group (IG) or to the control group (CG) (usual care) for three months. The Intervention consisted in 24 supervised exercise classes, combining aerobic and resistance exercises in order to reduce the most common side effects of the treatments. QoL, LTE, body composition, VO2max, strength, shoulder range of motion, fatigue, depression and self-esteem were measured in all the patients at baseline and after three months. RESULTS A total of 89 patients aged 49.06±8.75 years were finally assessed. IG (n=44) showed significant better results in QoL (p=0.0001; d=0.85), LTE (p=0.0001; d=2.77), in body composition, in the physical variable and in psychological outcomes, compared with the CG (n=45). In addition, a correlation between QoL and LTE (r= 0.58; p=0.001) was found in the IG, while CG did not show this correlation. Significant changes in body composition were observed in the group comparisons, especially in lean mass (p=0.001) and body fat mass (p= 0.0001). Positive changes were also observed in the physical and psychological variables in comparisons between groups. CONCLUSIONS These results suggest that this exercise program may be an integrative intervention, which is able to improve QoL and LTE levels in breast cancer survivors, reducing breast cancer side effects of treatments and improving their physical and psychological general health. Exercise may be an effective and inexpensive strategy to be included in patients integrative care.

Optical sensing of the fatigue damage state of CFRP under realistic aeronautical load sequences

We present an optical sensing methodology to estimate the fatigue damage state of structures made of carbon fiber reinforced polymer (CFRP), by measuring variations on the surface roughness. Variable amplitude loads (VAL), which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF) have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.75 between both variables. The data were compared with a previous study for Constant Amplitude Load (CAL) obtaining similar results. Conclusions suggest that the surface roughness measured in strategic zones is a useful technique for structural health monitoring of CFRP structures, and that it is independent of the type of load applied. Surface roughness can be measured in the field by optical techniques such as speckle, confocal perfilometers and interferometry, among others.

Measuring emotion: the long and short of it

Estudio de la eficiencia en la reducción del número de términos empleados en los léxicos de respuesta emocional del consumidor: aplicación en cerveza