Urban wind energy: empirical optimization of high-rise building roof shape for the wind energy exploitation

El programa Europeo HORIZON2020 en Futuras Ciudades Inteligentes establece como objetivo que el 20% de la energía eléctrica sea generada a partir de fuentes renovables. Este objetivo implica la necesidad de potenciar la generación de energía eólica en todos los ámbitos. La energía eólica reduce drásticamente las emisiones de gases de efecto invernadero y evita los riesgos geo-políticos asociados al suministro e infraestructuras energéticas, así como la dependencia energética de otras regiones. Además, la generación de energía distribuida (generación en el punto de consumo) presenta significativas ventajas en términos de elevada eficiencia energética y estimulación de la economía. El sector de la edificación representa el 40% del consumo energético total de la Unión Europea. La reducción del consumo energético en este área es, por tanto, una prioridad de acuerdo con los objetivos "20-20-20" en eficiencia energética. La Directiva 2010/31/EU del Parlamento Europeo y del Consejo de 19 de mayo de 2010 sobre el comportamiento energético de edificaciones contempla la instalación de sistemas de suministro energético a partir de fuentes renovables en las edificaciones de nuevo diseño. Actualmente existe una escasez de conocimiento científico y tecnológico acerca de la geometría óptima de las edificaciones para la explotación de la energía eólica en entornos urbanos. El campo tecnológico de estudio de la presente Tesis Doctoral es la generación de energía eólica en entornos urbanos. Específicamente, la optimization de la geometría de las cubiertas de edificaciones desde el punto de vista de la explotación del recurso energético eólico. Debido a que el flujo del viento alrededor de las edificaciones es exhaustivamente investigado en esta Tesis empleando herramientas de simulación numérica, la mecánica de fluidos computacional (CFD en inglés) y la aerodinámica de edificaciones son los campos científicos de estudio. El objetivo central de esta Tesis Doctoral es obtener una geometría de altas prestaciones (u óptima) para la explotación de la energía eólica en cubiertas de edificaciones de gran altura. Este objetivo es alcanzado mediante un análisis exhaustivo de la influencia de la forma de la cubierta del edificio en el flujo del viento desde el punto de vista de la explotación energética del recurso eólico empleando herramientas de simulación numérica (CFD). Adicionalmente, la geometría de la edificación convencional (edificio prismático) es estudiada, y el posicionamiento adecuado para los diferentes tipos de aerogeneradores es propuesto. La compatibilidad entre el aprovechamiento de las energías solar fotovoltaica y eólica también es analizado en este tipo de edificaciones. La investigación prosigue con la optimización de la geometría de la cubierta. La metodología con la que se obtiene la geometría óptima consta de las siguientes etapas: - Verificación de los resultados de las geometrías previamente estudiadas en la literatura. Las geometrías básicas que se someten a examen son: cubierta plana, a dos aguas, inclinada, abovedada y esférica. - Análisis de la influencia de la forma de las aristas de la cubierta sobre el flujo del viento. Esta tarea se lleva a cabo mediante la comparación de los resultados obtenidos para la arista convencional (esquina sencilla) con un parapeto, un voladizo y una esquina curva. - Análisis del acoplamiento entre la cubierta y los cerramientos verticales (paredes) mediante la comparación entre diferentes variaciones de una cubierta esférica en una edificación de gran altura: cubierta esférica estudiada en la literatura, cubierta esférica integrada geométricamente con las paredes (planta cuadrada en el suelo) y una cubierta esférica acoplada a una pared cilindrica. El comportamiento del flujo sobre la cubierta es estudiado también considerando la posibilidad de la variación en la dirección del viento incidente. - Análisis del efecto de las proporciones geométricas del edificio sobre el flujo en la cubierta. - Análisis del efecto de la presencia de edificaciones circundantes sobre el flujo del viento en la cubierta del edificio objetivo. Las contribuciones de la presente Tesis Doctoral pueden resumirse en: - Se demuestra que los modelos de turbulencia RANS obtienen mejores resultados para la simulación del viento alrededor de edificaciones empleando los coeficientes propuestos por Crespo y los propuestos por Bechmann y Sórensen que empleando los coeficientes estándar. - Se demuestra que la estimación de la energía cinética turbulenta del flujo empleando modelos de turbulencia RANS puede ser validada manteniendo el enfoque en la cubierta de la edificación. - Se presenta una nueva modificación del modelo de turbulencia Durbin k — e que reproduce mejor la distancia de recirculación del flujo de acuerdo con los resultados experimentales. - Se demuestra una relación lineal entre la distancia de recirculación en una cubierta plana y el factor constante involucrado en el cálculo de la escala de tiempo de la velocidad turbulenta. Este resultado puede ser empleado por la comunidad científica para la mejora del modelado de la turbulencia en diversas herramientas computacionales (OpenFOAM, Fluent, CFX, etc.). - La compatibilidad entre las energías solar fotovoltaica y eólica en cubiertas de edificaciones es analizada. Se demuestra que la presencia de los módulos solares provoca un descenso en la intensidad de turbulencia. - Se demuestran conflictos en el cambio de escala entre simulaciones de edificaciones a escala real y simulaciones de modelos a escala reducida (túnel de viento). Se demuestra que para respetar las limitaciones de similitud (número de Reynolds) son necesarias mediciones en edificaciones a escala real o experimentos en túneles de viento empleando agua como fluido, especialmente cuando se trata con geometrías complejas, como es el caso de los módulos solares. - Se determina el posicionamiento más adecuado para los diferentes tipos de aerogeneradores tomando en consideración la velocidad e intensidad de turbulencia del flujo. El posicionamiento de aerogeneradores es investigado en las geometrías de cubierta más habituales (plana, a dos aguas, inclinada, abovedada y esférica). - Las formas de aristas más habituales (esquina, parapeto, voladizo y curva) son analizadas, así como su efecto sobre el flujo del viento en la cubierta de un edificio de gran altura desde el punto de vista del aprovechamiento eólico. - Se propone una geometría óptima (o de altas prestaciones) para el aprovechamiento de la energía eólica urbana. Esta optimización incluye: verificación de las geometrías estudiadas en el estado del arte, análisis de la influencia de las aristas de la cubierta en el flujo del viento, estudio del acoplamiento entre la cubierta y las paredes, análisis de sensibilidad del grosor de la cubierta, exploración de la influencia de las proporciones geométricas de la cubierta y el edificio, e investigación del efecto de las edificaciones circundantes (considerando diferentes alturas de los alrededores) sobre el flujo del viento en la cubierta del edificio objetivo. Las investigaciones comprenden el análisis de la velocidad, la energía cinética turbulenta y la intensidad de turbulencia en todos los casos. ABSTRACT The HORIZON2020 European program in Future Smart Cities aims to have 20% of electricity produced by renewable sources. This goal implies the necessity to enhance the wind energy generation, both with large and small wind turbines. Wind energy drastically reduces carbon emissions and avoids geo-political risks associated with supply and infrastructure constraints, as well as energy dependence from other regions. Additionally, distributed energy generation (generation at the consumption site) offers significant benefits in terms of high energy efficiency and stimulation of the economy. The buildings sector represents 40% of the European Union total energy consumption. Reducing energy consumption in this area is therefore a priority under the "20-20-20" objectives on energy efficiency. The Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings aims to consider the installation of renewable energy supply systems in new designed buildings. Nowadays, there is a lack of knowledge about the optimum building shape for urban wind energy exploitation. The technological field of study of the present Thesis is the wind energy generation in urban environments. Specifically, the improvement of the building-roof shape with a focus on the wind energy resource exploitation. Since the wind flow around buildings is exhaustively investigated in this Thesis using numerical simulation tools, both computational fluid dynamics (CFD) and building aerodynamics are the scientific fields of study. The main objective of this Thesis is to obtain an improved (or optimum) shape of a high-rise building for the wind energy exploitation on the roof. To achieve this objective, an analysis of the influence of the building shape on the behaviour of the wind flow on the roof from the point of view of the wind energy exploitation is carried out using numerical simulation tools (CFD). Additionally, the conventional building shape (prismatic) is analysed, and the adequate positions for different kinds of wind turbines are proposed. The compatibility of both photovoltaic-solar and wind energies is also analysed for this kind of buildings. The investigation continues with the buildingroof optimization. The methodology for obtaining the optimum high-rise building roof shape involves the following stages: - Verification of the results of previous building-roof shapes studied in the literature. The basic shapes that are compared are: flat, pitched, shed, vaulted and spheric. - Analysis of the influence of the roof-edge shape on the wind flow. This task is carried out by comparing the results obtained for the conventional edge shape (simple corner) with a railing, a cantilever and a curved edge. - Analysis of the roof-wall coupling by testing different variations of a spherical roof on a high-rise building: spherical roof studied in the litera ture, spherical roof geometrically integrated with the walls (squared-plant) and spherical roof with a cylindrical wall. The flow behaviour on the roof according to the variation of the incident wind direction is commented. - Analysis of the effect of the building aspect ratio on the flow. - Analysis of the surrounding buildings effect on the wind flow on the target building roof. The contributions of the present Thesis can be summarized as follows: - It is demonstrated that RANS turbulence models obtain better results for the wind flow around buildings using the coefficients proposed by Crespo and those proposed by Bechmann and S0rensen than by using the standard ones. - It is demonstrated that RANS turbulence models can be validated for turbulent kinetic energy focusing on building roofs. - A new modification of the Durbin k — e turbulence model is proposed in order to obtain a better agreement of the recirculation distance between CFD simulations and experimental results. - A linear relationship between the recirculation distance on a flat roof and the constant factor involved in the calculation of the turbulence velocity time scale is demonstrated. This discovery can be used by the research community in order to improve the turbulence modeling in different solvers (OpenFOAM, Fluent, CFX, etc.). - The compatibility of both photovoltaic-solar and wind energies on building roofs is demonstrated. A decrease of turbulence intensity due to the presence of the solar panels is demonstrated. - Scaling issues are demonstrated between full-scale buildings and windtunnel reduced-scale models. The necessity of respecting the similitude constraints is demonstrated. Either full-scale measurements or wind-tunnel experiments using water as a medium are needed in order to accurately reproduce the wind flow around buildings, specially when dealing with complex shapes (as solar panels, etc.). - The most adequate position (most adequate roof region) for the different kinds of wind turbines is highlighted attending to both velocity and turbulence intensity. The wind turbine positioning was investigated for the most habitual kind of building-roof shapes (flat, pitched, shed, vaulted and spherical). - The most habitual roof-edge shapes (simple edge, railing, cantilever and curved) were investigated, and their effect on the wind flow on a highrise building roof were analysed from the point of view of the wind energy exploitation. - An optimum building-roof shape is proposed for the urban wind energy exploitation. Such optimization includes: state-of-the-art roof shapes test, analysis of the influence of the roof-edge shape on the wind flow, study of the roof-wall coupling, sensitivity analysis of the roof width, exploration of the aspect ratio of the building-roof shape and investigation of the effect of the neighbouring buildings (considering different surrounding heights) on the wind now on the target building roof. The investigations comprise analysis of velocity, turbulent kinetic energy and turbulence intensity for all the cases.

Influence of an upstream building on the wind-induced mean suction on the flat roof of a low-rise building

The effect of an upstream building on the suction forces on the flat roof of a low-rise building placed in the wake of the former is analyzed. The analysis has been performed by wind tunnel testing of a flat roof, low-rise building model equipped with pressure taps on the roof and different block-type buildings (only configurations where the upstream building is as high or higher than the downstream one are considered in this paper). The influence of the distance between both buildings on the wind loads on the downstream building roof is analyzed, as well as the height of the upstream one and the wind angle of incidence. Experimental results reveal that the wind load increases as the relative height of the upstream building increases, the wind load being highest for intermediate distances between buildings, when a passage between them is formed.

On roof geometry for urban wind energy exploitation in high-rise buildings

The European program HORIZON2020 aims to have 20% of electricity produced by renewable sources. The building sector represents 40% of the European Union energy consumption. Reducing energy consumption in buildings is therefore a priority for energy efficiency. The present investigation explores the most adequate roof shapes compatible with the placement of different types of small wind energy generators on high-rise buildings for urban wind energy exploitation. The wind flow around traditional state-of-the-art roof shapes is considered. In addition, the influence of the roof edge on the wind flow on high-rise buildings is analyzed. These geometries are investigated, both qualitatively and quantitatively, and the turbulence intensity threshold for horizontal axis wind turbines is considered. The most adequate shapes for wind energy exploitation are identified, studying vertical profiles of velocity, turbulent kinetic energy and turbulence intensity. Curved shapes are the most interesting building roof shapes from the wind energy exploitation point of view, leading to the highest speed-up and the lowest turbulence intensity.

Lo público en lo privado : la calle elevada como catalizador del encuentro colectivo

En la actualidad, el individualismo social originado por las nuevas sociedades de la información, la crisis económica, y, aún más acusado por aquella arquitectura que busca la máxima rentabilidad, ha provocado una creciente incomunicación entre las personas que comparten los mismos espacios residenciales. La presente tesis doctoral aborda el estudio del espacio común dentro del proyecto de vivienda colectiva, desde la noción de espacio intermedio, entendido como frontera espacial –entre el espacio público de la ciudad y la atmosfera íntima de la vivienda– donde tienen lugar los encuentros sociales entre residentes. El principal objetivo de la investigación es rescatar y poner en valor principios básicos del diseño arquitectónico –muchos de ellos en desuso– que mejoran la calidad del espacio colectivo y favorecen la aparición de una atmósfera agradable para el encuentro interpersonal, así como un intento de codificación de estos aspectos, atendiendo a criterios conceptuales que definen el espacio público contemporáneo. La hipótesis de partida se basa en la consideración del proyecto de viviendas como modelo análogo al proyecto urbano de la ciudad –con el que guarda sugerentes similitudes–, y los espacios intermedios como espacio de referencia que pone en valor aquello que liga – integrado en el propio proyecto–. Este supuesto básico ha permitido a diferentes autores poner en relación fecunda el diseño de la casa, el edificio y la ciudad, con el individuo, la comunidad y la sociedad; y ha posibilitado plantear la trasposición de conceptos arquitectónicos fructíferos, en relación con el espacio público –usando como representante la idea de calle elevada–, que ahora pueden enriquecer el entorno privado del edificio. Sirviéndose de instrumentos específicos de la disciplina arquitectónica, la tesis trata de explicar la devaluación a nivel social de los espacios colectivos, derivada de la construcción en altura y del uso excesivo de la estandarización en el proyecto de viviendas a partir del período de postguerra, e intensificada en el postmodernismo por la revolución de las comunicaciones. Se puede así reorientar el diseño de los proyectos de vivienda colectiva no como una simple agrupación de viviendas que favorecen la incomunicación, sino tratando de impulsar unas edificaciones que potencien la comunicación interpersonal. La reunión y reagrupación de un vocabulario arquitectónico específico, acorde con la complejidad social intrínseca en los espacios colectivos, amplia el alcance de los conceptos tratados. Dicha terminología se basa principalmente en mecanismos de cualificación espacial y permite evaluar la dimensión colectiva de la esfera semipública en el edificio de viviendas. ABSTRACT Currently, the social individualism caused by the new societies of information, the economic crisis and even more by architecture, which looks for maximum profitability, has led to a rising lack of communication between people that share the same living space. This doctoral thesis deals with the study of common space, which is based on the notion of in-between space, within the collective housing project. It is considered as a spatial frontier –between the public space of the city and the intimate atmosphere of the housing– where social contact between residents takes place. The main purpose of this research is to collect basic principles of architectural design –many of them no longer in use– that improve the quality of collective space. Following conceptual criteria that define the contemporary public space, they encourage the emergence of a pleasant atmosphere for interpersonal meeting as well as an attempt to codify these aspects. The initial hypothesis is based on the consideration of the housing project as a model analogous to the urban project of the city, with which it bears some similarities. Furthermore, it is based on the in-between spaces as space of reference that valuates what binds – integrated in the project-. That basic supposition has served various authors to connect the design of the house, the building and the city with the individual, the community and the society. In addition –regarding public space and using the idea of the street in the sky as representative–, it has enabled to bring up the transposition of productive architectural concepts, which can now enrich the private environment of the building. Using specific architectural instruments, this thesis deals with explaining the social devaluation of collective spaces. It has resulted from the high rise building construction as well as from the excessive standardization in the housing project since the postwar period and is intensified by the communications revolution in postmodernism. Thus, it is possible to change the design of collective housing projects not as a mere cluster of dwellings that enhance isolation, but by trying to promote buildings that improve interpersonal communication. The collection and regrouping of a specific architectural vocabulary, in accordance with the social complexity inherent in collective spaces, expands the scope of the discussed concepts. Such terminology is mainly based on qualifying spatial strategies and allows to assess the collective dimension of the semi-public sphere in dwelling.

A parametric, experimental analysis of conical vortices on curved roofs of low-rise buildings

Different methods to reduce the high suction caused by conical vortices have been reported in the literature: vertical parapets, either solid or porous, placed at the roof edges being the most analysed configuration. Another method for alleviating the high suction peaks due to conical vortices is the use of some non-standard parapet configuration like cantilever parapets. In this paper the influence of roof curvature on the conical vortex pattern appearing on a curved roof (Fig. 1) when subject to oblique winds is experimentally analysed by testing the mean pressure distribution on the curved roofs of low-rise building models in a wind tunnel. Also, the efficiency of cantilever parapets to reduce mean suction loads on curved roofs is experimentally checked. Very high suction loads have been measured on curved roofs, the magnitude of these high suction loads being significantly decreased when cantilever parapets are used. Thus, the suitability of these parapets to reduce wind pressure loads on curved roofs is demonstrated.

Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market

Wind tunnel analysis on the influence of cantilever parapets on the wind loads on curved roofs

Different methods to reduce the high suction caused by conical vortices have been reported in the literature: vertical parapets, either solids or porous, placed at the roof edges being the most analysed configuration. Another method for alleviating the high suction peaks due to conical vortices is to round the roof edges. Very recently, the use of some non-standard parapet configurations, like cantilever parapets, has been suggested. In this paper, its efficiency to reduce suction loads on curved roofs is experimentally checked by testing the pressure distribution on the curved roof of a low-rise building model in a wind tunnel. Very high suction loads have been measured on this model, the magnitude of these high suction loads being significantly decreased when cantilever...

Muro cortina modular con marco de baja transmitancia térmica integrado en el vidrio aislante a través de adhesivos estructurales = Unitised curtain wall with low thermal transmittance frame integrated within the insulating glass unit through structural adhesives

Los muros cortina modulares están constituidos por paneles prefabricados que se fijan al edificio a través de anclajes a lo largo del borde del forjado. El proceso de prefabricación garantiza buena calidad y control de los acabados y el proceso de instalación es rápido y no requiere andamiaje. Por estas razones su uso está muy extendido en torres. Sin embargo, el diseño de los marcos de aluminio podría ser más eficiente si se aprovechara la rigidez de los vidrios para reducir la profundidad estructural de los montantes. Asimismo, se podrían reducir los puentes térmicos en las juntas si se sustituyeran los marcos por materiales de menor conductividad térmica que el aluminio. Esta investigación persigue desarrollar un muro cortina alternativo que reduzca la profundidad estructural, reduzca la transmisión térmica en las juntas y permita un acabado enrasado al interior, sin que sobresalgan los montantes. La idea consiste en conectar un marco de material compuesto de fibra de vidrio a lo largo del borde del vidrio aislante a través de adhesivos estructurales para así movilizar una acción estructural compuesta entre los dos vidrios y lograr una baja transmitancia térmica. El marco ha de estar integrado en la profundidad del vidrio aislante. En una primera fase se han efectuado cálculos estructurales y térmicos preliminares para evaluar las prestaciones a un nivel esquemático. Además, se han realizado ensayos a flexión en materiales compuestos de fibra de vidrio y ensayos a cortante en las conexiones adhesivas entre vidrio y material compuesto. Con la información obtenida se ha seleccionado el material del marco y del adhesivo y se han efectuado cambios sobre el diseño original. Los análisis numéricos finales demuestran una reducción de la profundidad estructural de un 80% y una reducción de la transmisión térmica de un 6% en comparación con un sistema convencional tomado como referencia. El sistema propuesto permite obtener acabados enrasados. ABSTRACT Unitised curtain wall systems consist of pre manufactured cladding panels which can be fitted to the building via pre fixed brackets along the edge of the floor slab. They are universally used for high rise buildings because the factory controlled assembly of units ensures high quality and allows fast installation without external access. However, its frame is structurally over-dimensioned because it is designed to carry the full structural load, failing to take advantage of potential composite contribution of glass. Subsequently, it is unnecessarily deep, occupying valuable space, and protrudes to the inside, causing visual disruption. Moreover, it is generally made of high thermal conductivity metal alloys, contributing to substantial thermal transmission at joints. This research aims to develop a novel frame-integrated unitised curtain wall system that will reduce thermal transmission at joints, reduce structural depth significantly and allow an inside flush finish. The idea is to adhesively bond a Fibre Reinforced Polymer (FRP) frame to the edge of the Insulated Glass Unit (IGU), thereby achieving composite structural behaviour and low thermal transmittance. The frame is to fit within the glazing cavity depth. Preliminary analytical structural and numerical thermal calculations are carried out to assess the performance of an initial schematic design. 4-point bending tests on GFRP and single-lap shear tests on bonded connections between GFRP and glass are performed to inform the frame and adhesive material selection process and to characterise these materials. Based on the preliminary calculations and experimental tests, some changes are put into effect to improve the performance of the system and mitigate potential issues. Structural and thermal numerical analysis carried out on the final detail design confirm a reduction of the structural depth to almost one fifth and a reduction of thermal transmission of 6% compared to a benchmark conventional system. A flush glazed appearance both to the inside and the outside are provided while keeping the full functionality of a unitised system.

El recorrido: evaluación de las cualidades sensoriales y formales del medio urbano como parte de los criterios de caminabilidad. La ciudad de Taipei como caso de estudio

La presente investigación aborda el análisis de las cualidades del entorno urbano que inciden en la experiencia perceptiva de su recorrido. Los intereses que la motivan tienen que ver con la recuperación de la ciudad para el viandante y se sitúa dentro de un marco de intereses más amplio como es el de la ciudad sostenible. En primer lugar, se contextualiza el tema de la experiencia del recorrido a través de disciplinas diferentes como son el cine, la literatura, la arquitectura, el urbanismo, la arquitectura del paisaje, la psicología y la estética ambiental. De este modo, se refuerza el argumento en torno al papel que desempeñan la forma y otros estímulos sensoriales en la experiencia del espacio, ya sea éste urbano, arquitectónico o natural. La experiencia que las personas viven al desplazarse por un entorno viene definida por infinitos factores que van desde la configuración física del entorno recorrido, hasta el aprendizaje cultural de la persona que camina; desde los estímulos sensoriales que se reciben, hasta las condiciones físicas que posibilitan la funcionalidad del recorrido; desde las sutilezas de índole secuencial que se desvelan a medida que avanzamos, hasta las condiciones higrotérmicas en el momento en que se lleva a cabo el desplazamiento. Sin embargo, factores como las motivaciones y atenciones personales del que anda, así como sus recuerdos de experiencias anteriores, deseos, imaginación y estado de ánimo, también definen nuestra experiencia al caminar que, indudablemente, se encuentra ligada a nuestra personalidad y, por lo tanto, no puede ser exacta a la de otra persona. Conscientes de que todos estos factores se funden en un fenómeno global, y que no se dan en la vida por separado, nos hemos esforzado por independizar las cualidades sensoriales y formales, únicamente a efectos de investigación. La importancia del tema a investigar reside en las conexiones que existen entre las cualidades del medio construido y la experiencia cotidiana de su recorrido, en la medida en que dicha vinculación establece relaciones con la calidad de vida, la salud de los ciudadanos y sus sentimientos de identidad. En este sentido, el problema clave encontrado es que si la definición de la experiencia del recorrido urbano es demasiado amplia, se vuelve nebulosa e inoperativa, pero si se precisa demasiado, se pueden excluir variables importantes. Hemos concentrado nuestros esfuerzos en buscar un medio que permita hacer operativo el estudio de aspectos que, por su propia naturaleza, son difíciles de controlar y aplicar en la práctica. En este sentido, el campo de estudio que aúna interés en el tema, producción científica y vocación práctica, es el de la caminabilidad de las ciudades. Por esta razón, hemos situado nuestro trabajo dentro del marco de criterios que este campo establece para valorar un entorno caminable. Sin embargo, hemos detectado que los trabajos sobre caminabilidad tienden a desarrollarse dentro de la disciplina del planeamiento de transporte y, con frecuencia, siguiendo las mismas pautas que la investigación sobre el transporte motorizado. Además, la tendencia a proporcionar datos numéricos producto de la medición controlada de variables, para respaldar iniciativas dentro de los ámbitos de toma de decisiones, lleva consigo un progresivo alejamiento de los aspectos más sutiles y próximos de la experiencia de las personas y la especificidad de los lugares. Por estas razones, hemos estimado necesario profundizar en la experiencia peatonal explorando otras líneas de trabajo como son la habitabilidad de las ciudades, políticas llevadas a cabo para mejorar la calidad del espacio público o las certificaciones de sostenibilidad en el ámbito del urbanismo. También se han estudiado las aproximaciones gráficas a la representación y simulación de recorridos urbanos por su importancia en la comunicación y promoción de caminar. Para detectar las problemáticas implicadas en la definición de una herramienta que permita valorar, de manera operativa, la calidad de la experiencia del recorrido urbano, la metodología de valoración propuesta se ha basado en la combinación de distintos métodos y en la conjugación de tres aproximaciones: valoración por parte del investigador en calidad de experto, valoración realizada por el investigador en el papel de usuario y valoración por el ciudadano. El desarrollo de esta investigación se ha visto condicionado por la intención de aplicar lo estudiado en un caso práctico. El marco de criterios que los trabajos sobre caminabilidad de las ciudades establecen para que se dé un entorno caminable, se puede resumir en que concurran los siguientes factores: mezcla de usos, densidad de población y edificación relativamente altas, destinos públicos accesibles a pie, un alto grado de seguridad con respecto al tráfico y actos delictivos, alta funcionalidad (dimensiones, pendientes, etc.) y atractivo. Una vez definido el modelo de ciudad en que es pertinente realizar una investigación sobre las cualidades del entorno urbano responsables de que éste se perciba como atractivo, se escogió la ciudad de Taipei, entre otras razones, por cumplir con los requisitos restantes. Con respecto al caso práctico, el objetivo es detectar fortalezas y debilidades del área central de la ciudad de Taipei en cuanto a la experiencia perceptiva que proporciona a los viandantes. ABSTRACT This research addresses the analysis of the qualities of the urban environment that affect the perceptual experience of walking. The interests lying behind it are related to the recovery of the city for pedestrians, and is framed within the sustainable city framework of interests. Firstly, the issue of the experience of walking is contextualized through different disciplines such as film, literature, architecture, urban planning, landscape architecture, environmental psychology and aesthetics. This way, the argument about the role that form and other sensory stimuli play in the experience of space, whether it is urban, architectural or natural, is strengthened. The walking experience of people is defined by factors ranging from the physical configuration of the environment to the cultural background of the person who walks, from the sensory stimuli that are perceived to the physical conditions that enable the functionality of the walk, from the subtleties of sequential nature that are revealed as we move around to hygrothermal conditions at the specific time of walking. Nevertheless, factors such as personal motivations and attentions of the walker, as well as memories of past experiences, desires, imagination and mood, also define our walking experience that is undoubtedly linked to our personality and, therefore, it cannot be exactly the same as other people's experience. Being aware that all these factors come together in a total phenomenon and that, in real life, they do not exist separately, we focused on separating sensory and formal qualities only for research purposes. The importance of the research topic lies in the connections between the qualities of the built environment and the quotidian experience of walking through it, to the extent that such link establishes relationships with the quality of life, health and feelings of identity of citizens. In this sense, the key problem encountered is that, if the definition of urban walking experience is too broad, it becomes nebulous and non‐operational, but if it is too precise, important variables can be excluded. We concentrated our efforts on finding a way to operationalize the study of questions that, by their very nature, are difficult to control and apply in practice. In this regard, the field of study that combines interest in the topic, scientific production and practical purpose, is the walkability of cities. For this reason, we placed our work within the framework of the set of criteria that this field establishes for assessing an environment as walkable. However, we found that works on walkability tend to be developed within the discipline of transportation planning and often following the same guidelines that research on motorized transport. Furthermore, the tendency to provide numerical data as a result of the controlled measurement of variables in order to support initiatives in decision making areas, involves a progressive distancing from the proximity and the most subtle aspects of the experience of people, and from the specificity of places. For these reasons, we considered it was necessary to deepen into the study of pedestrians experience, by exploring other lines of work such as the livability of cities, implemented policies to improve the quality of the public space or sustainability certifications in urbanism. Graphic representation and simulation of urban walks are also studied due to their important role in communication and promotion of walking. In order to find the issues involved in defining a tool to assess, in an operational way, the quality of urban walking experience, the proposed assessment methodology is based on the combination of different methods and the synthesis of three approaches: assessment by the researcher as expert, assessment by the researcher playing the role of user and assessment by the citizens. The development of this research has been conditioned by our intention of applying it in a case study. The framework of criteria that works on walkability of cities set to define a walkable environment, can be summarized in the following factors: mix of uses, population and building density rather high, public destinations accessible on foot, high levels of safety in terms of traffic and crime, high functionality (dimensions, slopes, etc.) and attractiveness. After defining the model of city in which it is relevant to conduct an investigation on the qualities that are responsible of the attractiveness of the environment; Taipei City was selected because it meets the remaining requirements, among other reasons. Regarding the case study, the goal is to identify strengths and weaknesses in the central area of Taipei City in terms of the perceptual experience of pedestrians.

Desarrollo de una metodología de integración paisajística de las autopistas

El presente trabajo se enmarca dentro del proyecto “Operación de Autopistas Seguras, Inteligentes y Sostenibles (OASIS)”, cuyo principal objetivo es definir la autopista del futuro, aquella que en su operación presentará niveles notablemente altas de seguridad, servicio al usuario y sostenibilidad. Para lograrlo, uno de los parámetros a tener en cuenta es la conservación y optimización del paisaje por el que discurren. Esta tesis desarrolla una metodología de valoración del paisaje de las autopistas, aplicando dicha metodología a diversos tramos de las autopistas gestionadas por empresas del proyecto (OHL Concesiones, Iridium y Abertis). El estudio se ha llevado a cabo en más de 2.000 km de autopistas, identificando los diferentes paisajes vistos desde la carretera y elaborando un catálogo de fotografías digitalizadas y georreferenciadas de los paisajes; desarrollando y aplicando una novedosa metodología de valoración de la calidad del paisaje; determinando las diferencias entre el paisaje percibido desde las autopistas por medio de fotografías y mediante la utilización de mapas representativos de paisaje; identificando los elementos de diseño paisajístico (puentes, estaciones de servicio, etc.) y estableciendo alternativas para su mejor adecuación paisajística; y estimando el impacto que provocan estas infraestructuras al observarse desde fuera. Es de esperar que las conclusiones extraídas de este proyecto permitan una mejor integración paisajística de las autopistas del futuro, convirtiéndose en instrumentos para mostrar paisajes de mayor calidad, y reduciendo el impacto como elementos modificadores del territorio. Summary This work is within the framework of the project "Operation of Safe, Intelligent and Sustainable Highways (OASIS)," whose main objective is to define the highway of the future, which in its operation will present significantly high levels of safety, customer service and sustainability. To achieve this, one of the parameters to consider is landscape conservation and improvement along highways. This thesis develops a methodology for assessing the landscape of highways, applying the model to different stretches of highway managed by project companies (OHL Concessions, Iridium and Abertis). The study was carried out in more than 2.000 km of highways, identifying the different landscapes seen from the road and developing a catalog of digitized and georeferenced photographs of landscapes; developing and applying a new methodology for assessing the quality of the landscape; determining the differences between the landscape seen from highways through photographs and use of landscape maps; identifying the landscape design elements (bridges, service area, etc.) and providing alternatives for better landscape; and integration estimating the impact that cause these infrastructures when viewed from outside. It is expected that the conclusions extract from this project allow to better landscape integrate of the future highways, become instruments to show higher quality landscapes, reducing the impact as modifiers´ elements of the territory.

Luciano Kulczewski, arquitecto: Eclecticismo y procesos modernizadores en el Chile de la primera mitad del siglo XX

Esta investigación tiene por fin poner en valor la obra del arquitecto chileno Luciano Kulczewski, profesional que cumplió un rol clave y distintivo en la primera mitad del siglo XX, considerado como un período crucial para el desarrollo de la arquitectura nacional, ya que es el momento en que se produce el advenimiento de la modernidad en el país. Si bien su figura goza de un gran reconocimiento, solamente una parte de su obra es (re)conocida por la historiografía nacional. Su labor en el libre ejercicio de la profesión, como asimismo los distintos cargos administrativos y políticos que desempeñó en su vida, hacían suponer un corpus más amplio, como finalmente se pudo constatar en este estudio. El amplio catastro documentado permitió fehacientemente identificar el rol y el significado que esta obra cumpliera en la transición que hizo posible dejar atrás los valores impuesto por el Academicismo, para incorporar los procesos de modernización en los distintos ámbitos de la arquitectura. Por tanto, el quehacer de Kulczewski se reveló como ejemplar y paradigmático. Una de las ilustraciones más elocuentes a este respecto fue la precursora realización de edificios en altura para uso residencial. Esta tipología lo obligó a trabajar con nuevos materiales y técnicas constructivas, junto a la necesidad de introducir las modernas tecnologías que estos portentos arquitectónicos requerían para su funcionamiento, como era el uso de ascensores y los sistemas de calefacción centralizada. El estudio del contexto urbano de sus obras permitió dar cuenta también de los procesos que estaban convirtiendo a las principales ciudades del país en urbes ‘modernas’. En este ámbito, destaca la nueva concepción urbanística que llegaba vinculada a los barrios-jardín, que contrariamente a lo establecido por el urbanismo tradicional, implicó inéditas maneras de articular la ciudad y el empleo de nuevas tipologías residenciales. Estas concepciones de ciudad encontraron eco principalmente en las urbanizaciones que se estaban realizando en las nuevas comunas de la capital, contexto elegido por el arquitecto para llevar a cabo algunos innovadores conjuntos habitacionales, hoy considerados modélicos, y que estaban destinados a un nuevo estrato social empoderado y demandante: la clase media. Su particular preocupación por las cuestiones sociales, las que entraron en crisis con el devenir del siglo XX, lo llevaron a desarrollar una activa vida política, que culminó con un importante puesto administrativo en el primer Gobierno Radical que tuvo lugar en el país. Desde esa posición, pudo gestionar y dar solución apropiada a la urgente necesidad de viviendas obreras que requería el país, creando los primeros edificios colectivos destinados a este grupo social. Esto a la vez supuso un acercamiento más sustancial a las nuevas propuestas vinculadas al Movimiento Moderno. En conclusión, su quehacer hizo eco de los estilos vanguardistas y modernos que arribaron provenientes de Europa, pero reconociendo las realidades propias del país, de tal forma que la apropiación, y no la reproducción, fue su sello. En este proceso de adecuación al medio local, los modelos foráneos se desprenderán de muchas de sus principios rectores originales, lo que sumado a la impronta de un imaginario propio y original, convierten a sus creaciones en un caso singular en el contexto del la arquitectura chilena. ABSTRACT This research aims to add value to the work of Chilean architect Luciano Kulczewski, a professional who accomplished a key and distinctive role in the first half of the twentieth century, which is considered as a crucial period for the development of the Chilean architecture, since it corresponds to the arrive of Modernity in this country. While his figure is widely recognized, only a portion of his oeuvre is known (or acknowledged) by national historiography. Because of his work as a freelance professional and another administrative and political position he held in his life, it is possible to assume a larger corpus, as it was finally confirmed by this study. The copious documented cadastre allowed convincingly to identify the role and significance that this work fulfilled in the transition that made possible leaving behind the values imposed by Academicism, and thus to incorporate the modernization processes in the different fields of architecture. Therefore, the work of Kulczewski revealed itself as exemplary and paradigmatic. One of the most eloquent illustrations to this regard was the pioneering construction of high-rise buildings with a residential purpose. This typology drove him to work with new materials and constructive techniques, alongside with the need of introducing new modern technologies required by these architectonical advances for its operations, like the use of elevators and central heating systems. The study of the urban context of his work allowed also accounting the processes the major cities of the country went through in order to become 'modern' cities. In this context, it stands out the new urban conception linked to the idea of garden city, which was contrary to the practices of the traditional urbanism, and that implied new ways of articulating the city and that the use of new residential typologies. These urban notions were mainly echoed in the urbanizations that were made in the new districts of the city, scenario chosen by the architect for the concretion of innovative housing projects, nowadays thought as paradigmatic, and that were oriented for a new empowered and demanding social group: the middle class. His particular concern for social issues, which ones came into crisis with the arrival of the twentieth century, led him to take an active political role, culminating with an important administrative position in the first Radical Government that took place in the country. From that position, he could manage and provide adequate solutions to the urgent worker’s housing needs that required the country, creating the first collective buildings for this social group. This supposed a more substantial approach to new proposals of the Modern Movement. To conclude, his oeuvre was influenced by the avant-garde and modern styles that arrived from Europe, but with the proper adjustments to the local requirements, so that it is possible to say that appropriation more than reproduction was his hallmark. In this process, these features were transformed in order to get more flexibility for their adaptation to the Chilean needs that added to a personal and peculiar imaginary, which transformed his works into a unique case in the national architecture history.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Safety-related issues for high-speed railway bridges

Railway bridges have specific requirements related to safety, which often are critical aspects of design. In this paper the main phenomena are reviewed, namely vertical dynamic effects for impact effect of moving loads and resonance in high-speed, service limit states which affect the safety of running traffic, and lateral dynamic effects.

A simplified Probabilistic Safety Assesment of a Steam-Methane Reforming Hydrogen Production Plant coupled to a High-Temperature Gas Cooled Nuclear Reactor

A Probabilistic Safety Assessment (PSA) is being developed for a steam-methane reforming hydrogen production plant linked to a High-Temperature Gas Cooled Nuclear Reactor (HTGR). This work is based on the Japan Atomic Energy Research Institute’s (JAERI) High Temperature Test Reactor (HTTR) prototype in Japan. This study has two major objectives: calculate the risk to onsite and offsite individuals, and calculate the frequency of different types of damage to the complex. A simplified HAZOP study was performed to identify initiating events, based on existing studies. The initiating events presented here are methane pipe break, helium pipe break, and PPWC heat exchanger pipe break. Generic data was used for the fault tree analysis and the initiating event frequency. Saphire was used for the PSA analysis. The results show that the average frequency of an accident at this complex is 2.5E-06, which is divided into the various end states. The dominant sequences result in graphite oxidation which does not pose a health risk to the population. The dominant sequences that could affect the population are those that result in a methane explosion and occur 6.6E-8/year, while the other sequences are much less frequent. The health risk presents itself if there are people in the vicinity who could be affected by the explosion. This analysis also demonstrates that an accident in one of the plants has little effect on the other. This is true given the design base distance between the plants, the fact that the reactor is underground, as well as other safety characteristics of the HTGR. Sensitivity studies are being performed in order to determine where additional and improved data is needed.

Health and safety in the construction : subject pending to be included in the curriculum of architecture in Spain

The art of construction is a risky activity that directly affects the life and physical integrity of persons. Since the approval of Law 31/1995, of November 8, Prevention of Occupational Risks was the first legislation that established the current basis in all sectors and then transposed into Spanish law Directive 92/57/CEE called Royal Decree 1627/1997 of October 24, on minimum safety and health dispositions in construction works, measures have been proposed to develop a mixed body of scientific literature composed of researchers and professionals in the field of occupational safety and health, but even today there is still no clear and firm proposal, showing a lack of awareness in the occupational risk prevention and, therefore, a consolidation of the culture of prevention in society. Therefore, the technicians, who make up the building process, can incur in very high responsibilities, such as: Author of the project, Coordinator of Safety and Health during the preparation of the project and during the execution of works, Site Management: Site Manager. This involves the immediate creation of a general training in prevention for all architects starting when still studying, as well as specific training, appropriate and complementary to all the architects that will be devoted to the specialty of occupational safety and health in construction works. That is, first, we must make the responsible bodies aware of the urgent need to integrate risk prevention in the curricula of architecture and later in the continuing education of the profession. It is necessary that our teaching must conform to the laws on safety and health, due to the fact that the law recognizes our academic degrees and professional qualifications to perform functions in that area