Controlador MIDI basado en Kinect

Este proyecto tiene como objetivo el desarrollo de una interfaz MIDI, basada en técnicas de procesamiento digital de la imagen, capaz de controlar diversos parámetros de un software de audio mediante información gestual: el movimiento de las manos. La imagen es capturada por una cámara Kinect comercial y los datos obtenidos por ésta son procesados en tiempo real. La finalidad es convertir la posición de varios puntos de control de nuestro cuerpo en información de control musical MIDI. La interfaz ha sido desarrollada en el lenguaje y entorno de programación Processing, el cual está basado en Java, es de libre distribución y de fácil utilización. El software de audio seleccionado es Ableton Live, versión 8.2.2, elegido porque es útil tanto para la composición musical como para la música en directo, y esto último es la principal utilidad que se le pretende dar a la interfaz. El desarrollo del proyecto se divide en dos bloques principales: el primero, diseño gráfico del controlador, y el segundo, la gestión de la información musical. En el primer apartado se justifica el diseño del controlador, formado por botones virtuales: se explica el funcionamiento y, brevemente, la función de cada botón. Este último tema es tratado en profundidad en el Anexo II: Manual de usuario. En el segundo bloque se explica el camino que realiza la información MIDI desde el procesador gestual hasta el sintetizador musical. Este camino empieza en Processing, desde donde se mandan los mensajes que más tarde son interpretados por el secuenciador seleccionado, Ableton Live. Una vez terminada la explicación con detalle del desarrollo del proyecto se exponen las conclusiones del autor acerca del desarrollo del proyecto, donde se encuentran los pros y los contras a tener en cuenta para poder sacar el máximo provecho en el uso del controlador . En este mismo bloque de la memoria se exponen posibles líneas futuras a desarrollar. Se facilita también un presupuesto, desglosado en costes materiales y de personal. ABSTRACT. The aim of this project is the development of a MIDI interface based on image digital processing techniques, able to control several parameters of an audio software using gestural information, the movement of the hands. The image is captured by a commercial Kinect camera and the data obtained by it are processed in real time. The purpose is to convert the position of various points of our body into MIDI musical control information. The interface has been developed in the Processing programming language and environment which is based on Java, freely available and easy to used. The audio software selected is Ableton Live, version 8.2.2, chosen because it is useful for both music composition and live music, and the latter is the interface main intended utility. The project development is divided into two main blocks: the controller graphic design, and the information management. The first section justifies the controller design, consisting of virtual buttons: it is explained the operation and, briefly, the function of each button. This latter topic is covered in detail in Annex II: user manual. In the second section it is explained the way that the MIDI information makes from the gestural processor to the musical synthesizer. It begins in Processing, from where the messages, that are later interpreted by the selected sequencer, Ableton Live, are sent. Once finished the detailed explanation of the project development, the author conclusions are presented, among which are found the pros and cons to take into account in order to take full advantage in the controller use. In this same block are explained the possible future aspects to develop. It is also provided a budget, broken down into material and personal costs.

Integration of a data acquisition system based on FlexRIO technology with EPICS

EPICS (Experimental Physics and Industrial Control System) lies in a set of software tools and applications which provide a software infrastructure for building distributed data acquisition and control systems. Currently there is an increase in use of such systems in large Physics experiments like ITER, ESS, and FREIA. In these experiments, advanced data acquisition systems using FPGA-based technology like FlexRIO are more frequently been used. The particular case of ITER (International Thermonuclear Experimental Reactor), the instrumentation and control system is supported by CCS (CODAC Core System), based on RHEL (Red Hat Enterprise Linux) operating system, and by the plant design specifications in which every CCS element is defined either hardware, firmware or software. In this degree final project the methodology proposed in Implementation of Intelligent Data Acquisition Systems for Fusion Experiments using EPICS and FlexRIO Technology Sanz et al. [1] is used. The final objective is to provide a document describing the fulfilled process and the source code of the data acquisition system accomplished. The use of the proposed methodology leads to have two diferent stages. The first one consists of the hardware modelling with graphic design tools like LabVIEWFPGA which later will be implemented in the FlexRIO device. In the next stage the design cycle is completed creating an EPICS controller that manages the device using a generic device support layer named NDS (Nominal Device Support). This layer integrates the data acquisition system developed into CCS (Control, data access and communication Core System) as an EPICS interface to the system. The use of FlexRIO technology drives the use of LabVIEW and LabVIEW FPGA respectively. RESUMEN. EPICS (Experimental Physics and Industrial Control System) es un conjunto de herramientas software utilizadas para el desarrollo e implementación de sistemas de adquisición de datos y control distribuidos. Cada vez es más utilizado para entornos de experimentación física a gran escala como ITER, ESS y FREIA entre otros. En estos experimentos se están empezando a utilizar sistemas de adquisición de datos avanzados que usan tecnología basada en FPGA como FlexRIO. En el caso particular de ITER, el sistema de instrumentación y control adoptado se basa en el uso de la herramienta CCS (CODAC Core System) basado en el sistema operativo RHEL (Red Hat) y en las especificaciones del diseño del sistema de planta, en la cual define todos los elementos integrantes del CCS, tanto software como firmware y hardware. En este proyecto utiliza la metodología propuesta para la implementación de sistemas de adquisición de datos inteligente basada en EPICS y FlexRIO. Se desea generar una serie de ejemplos que cubran dicho ciclo de diseño completo y que serían propuestos como casos de uso de dichas tecnologías. Se proporcionará un documento en el que se describa el trabajo realizado así como el código fuente del sistema de adquisición. La metodología adoptada consta de dos etapas diferenciadas. En la primera de ellas se modela el hardware y se sintetiza en el dispositivo FlexRIO utilizando LabVIEW FPGA. Posteriormente se completa el ciclo de diseño creando un controlador EPICS que maneja cada dispositivo creado utilizando una capa software genérica de manejo de dispositivos que se denomina NDS (Nominal Device Support). Esta capa integra la solución en CCS realizando la interfaz con la capa EPICS del sistema. El uso de la tecnología FlexRIO conlleva el uso del lenguaje de programación y descripción hardware LabVIEW y LabVIEW FPGA respectivamente.

Greenfield shopping center development. The integration between environmental features, building design and investment analysis at the decision making stage

The Shopping centre is a long term investment in which Greenfield development decisions are often taken based on risks analysis regarding construction costs, location, competition, market and an expected DCF. Furthermore, integration between the building design, project planning, operational costs and investment analysis is not entirely considered by the investor at the decision making stage. The absence of such information tends to produce certain negative impacts on the future running costs and annual maintenance of the building, especially on energy demand and other occupancy expenses paid by the tenants to the landlord. From the investor´s point of view, this blind spot in strategy development will possibly decrease their profit margin as changes in the occupancy expenses[ ] have a direct outcome on the profit margin. In order to try to reduce some higher operating cost components such as energy use and other utility savings as well as their CO2 emissions, quite a few income properties worldwide have some type of environmental label such as BREEAM and LEED. The drawback identified in this labelling is that usually the investments required to get an ecolabel are high and the investor finds no direct evidence that it increases market value. However there is research on certified commercial properties (especially offices) that shows better performance in terms of occupancy rate and rental cost (Warren-Myers, 2012). Additionally, Sayce (2013) says that the certification only provides a quick reference point i.e. the lack of a certificate does not indicate that a building is not sustainable or efficient. Based on the issues described above, this research compares important components of the development stages such as investments costs, concept/ strategy development as well as the current investor income and property value. The subjects for this analysis are a shopping centre designed with passive cooling/bioclimatic strategies evaluated at the decision making stage, a certified regional shopping centre and a non-certified standard regional shopping centre. Moreover, the proposal intends to provide decision makers with some tools for linking green design features to the investment analysis in order to optimize the decision making process when looking into cost savings and design quality.

Aplicación web de gestión financiera personal desarrollada con MEAN.JS

En este trabajo de fin de grado se llevará a cabo la elaboración de una aplicación web de gestión de gastos personales desde sus inicios, hasta su completo funcionamiento. Estas aplicaciones poseen un crecimiento emergente en el mercado, lo cual implica que la competencia entre ellas es muy elevada. Por ello el diseño de la aplicación que se va a desarrollar en este trabajo ha sido delicadamente cuidado. Se trata de un proceso minucioso el cual aportará a cada una de las partes de las que va a constar la aplicación características únicas que se plasmaran en funcionalidades para el usuario, como son: añadir sus propios gastos e ingresos mensuales, confeccionar gráficos de sus principales gastos, obtención de consejos de una fuente externa, etc… Estas funcionalidades de carácter único junto con otras más generalistas, como son el diseño gráfico en una amplia gama de colores, harán su manejo más fácil e intuitivo. Hay que destacar que para optimizar su uso, la aplicación tendrá la característica de ser responsive, es decir, será capaz de modificar su interfaz según el tamaño de la pantalla del dispositivo desde el que se acceda. Para su desarrollo, se va a utilizar una de las tecnologías más novedosas del mercado y siendo una de las más revolucionarias del momento, MEAN.JS. Con esta innovadora tecnología se creará la aplicación de gestión económica de gastos personales. Gracias al carácter innovador de aplicar esta tecnología novedosa, los retos que plantea este proyecto son muy variados, desde cómo estructurar las carpetas del proyecto y toda la parte de backend hasta como realizar el diseño de la parte de frontend. Además una vez finalizado su desarrollo y puesta en marcha se analizaran posibles mejoras para poder perfeccionarla en su totalidad. ABSTRACT In this final degree project will take out the development of a web application from its inception, until its full performance management. These applications have an emerging market growth, implying that competition between them is very high. Therefore the design of the application that will be developed in this work has been delicately care. It's a painstaking process which will provide each of the parties which will contain the application unique features that were translated into functionality for the user, such as: add their own expenses and monthly income, make graphs of your major expenses, obtaining advice from an external source, etc... These features of unique character together with other more general, such as graphic design in a wide range of colors, will make more easy and intuitive handling. It should be noted that to optimize its use, the application will have the characteristic of being responsive, will be able to modify your interface according to the size of the screen of the device from which are accessed. For its development, it is to use one of the newest technologies on the market and being one of the most revolutionary moment, MEAN. JS. The economic management of personal expenses application will be created with this innovative technology. Thanks to the innovative nature of applying this new technology, the challenges posed by this project are varied, from how to structure the folders of the project and all the backend part up to how to perform the part of frontend design. In addition once finished its development and commissioning possible improvements will analyze to be able to perfect it in its entirety.

Desarrollo de una aplicación para la escalada y oferta de servicios web

El autor de este proyecto es miembro reciente de la asociación SoloBoulder, dedicada a la modalidad de escalada boulder, noticias y actualidad, contenido multimedia, promoción de un equipo de escaladores y defensa de valores medioambientales en la montaña. El principal canal de distribución de contenidos es una página web existente previa a este proyecto. La asociación ha detectado una escasez y mala calidad de recursos en internet en cuanto a guías de zonas donde poder practicar el boulder. Tal circunstancia impulsa la iniciativa de este proyecto fin de carrera. El objetivo general es el desarrollo de una nueva aplicación que proporcione a los usuarios a nivel mundial una guía interactiva de boulder y otros puntos de interés, una red social que permita la creación cooperativa y orgánica de contenido, y servicios web para el consumo de la información desde otras plataformas u organizaciones. El nuevo software desarrollado es independiente de la página web de SoloBoulder previa. No obstante, ambas partes se integran bajo el mismo domino web y aspecto. La nueva aplicación ofrece a escaladores y turistas un servicio informativo e interactivo de calidad, con el que se espera aumentar el número de visitas en todo el sitio web y poder ampliar la difusión de valores medioambientales, diversificar las zonas de boulder y regular las masificadas, favorecer el deporte y brindar al escalador una oportunidad de autopromoción personal. Una gran motivación para el autor también es el proceso de investigación y formación en tecnologías, patrones arquitecturales de diseño y metodologías de trabajo adaptadas a las tendencias actuales en la ingeniería de software, con especial curiosidad hacia el mundo web. A este respecto podemos destacar: metodología de trabajo en proyectos, análisis de proyectos, arquitecturas de software, diseño de software, bases de datos, programación y buenas prácticas, seguridad, interfaz gráfica web, diseño gráfico, Web Performance Optimization, Search Engine Optimization, etc. En resumen, este proyecto constituye un aprendizaje y puesta en práctica de diversos conocimientos adquiridos durante la ejecución del mismo, así como afianzamiento de materias estudiadas en la carrera. Además, el producto desarrollado ofrece un servicio de calidad a los usuarios y favorece el deporte y la autopromoción del escalador. ABSTRACT. The author of this Project is recent member of the association SoloBoulder, dedicated to a rock climbing discipline called bouldering, news, multimedia content, promotion of a team of climbers and defense of environmental values in the mountain. The main content distribution channel is a web page existing previous to this project. The association has detected scarcity and bad quality of resources on the internet about guides of bouldering areas. This circumstance motivates the initiative of this project. The general objective is the development of a new application which provides a worldwide, interactive bouldering guide, including other points of interest, a social network which allows the cooperative and organic creation of content, and web services for consumption of information from other platforms or organizations. The new software developed is independent of the previous SoloBoulder web page. However, both parts are integrated under the same domain and appearance. The new application offers to climbers and tourists a quality informative and interactive service, with which we hope to increase the number of visits in the whole web site and be able to expand the dissemination of environmental values, diversify boulder areas and regulate the overcrowded ones, encourage sport and offer to the climber an opportunity of self-promotion. A strong motivation for the author is also the process of investigation and education in technologies, architectural design patterns and working methodologies adapted to the actual trends in software engineering, with special curiosity about the web world. In this regard we could highlight: project working methodologies, project analysis, software architectures, software design, data bases, programming and good practices, security, graphic web interface, graphic design, Web Performance Optimization, Search Engine Optimization, etc. To sum up, this project constitutes learning and practice of diverse knowledge acquired during its execution, as well as consolidation of subjects studied in the degree. In addition, the product developed offers a quality service to the users and favors the sport and the selfpromotion of the climber.

Design Parameter Analysis of Point Absorber WEC via an Evolutionary-Algorithm-Based Dimensioning Tool

Wave energy conversion has an essential difference from other renewable energies since the dependence between the devices design and the energy resource is stronger. Dimensioning is therefore considered a key stage when a design project of Wave Energy Converters (WEC) is undertaken. Location, WEC concept, Power Take-Off (PTO) type, control strategy and hydrodynamic resonance considerations are some of the critical aspects to take into account to achieve a good performance. The paper proposes an automatic dimensioning methodology to be accomplished at the initial design project stages and the following elements are described to carry out the study: an optimization design algorithm, its objective functions and restrictions, a PTO model, as well as a procedure to evaluate the WEC energy production. After that, a parametric analysis is included considering different combinations of the key parameters previously introduced. A variety of study cases are analysed from the point of view of energy production for different design-parameters and all of them are compared with a reference case. Finally, a discussion is presented based on the results obtained, and some recommendations to face the WEC design stage are given.

Estrategias para el control microclimático del espacio entre edificaciones en clima cálido – húmedo

La presente investigación parte del problema en las zonas de clima cálido - húmedo en las cuales se producen impactos asociados a la incomodidad térmica producto de la intensa radiación solar, altas temperaturas y elevada humedad. Estos factores reducen la calidad de los espacios abiertos y desarrollan en la población una actitud de rechazo hacia el uso del microespacio urbano entre edificaciones en los desarrollos urbanos - conjuntos urbanos - , los mismos frecuentemente admiten soluciones que al parecer no contribuyen a la realización de las actividades comunes de esparcimiento de la población residente. Por lo tanto, el objetivo de la investigación es profundizar en la temática urbano - ambiental - social y el diseño urbano vinculada a la particularidad morfológica local, las condiciones microclimáticas, el uso del microespacio y los requerimientos de los usuarios. La finalidad de desarrollar estrategias de control microclimático del microespacio entre edificios en clima cálido - húmedo en búsqueda de soluciones óptimas que satisfagan las necesidades de los usuarios de los espacios exteriores en estas áreas residenciales. La investigación se centra en el estudio de las particularidades contextuales relacionadas con el microclima y las características urbanas - morfotipológicas, básicamente los factores microclimáticos (soleamiento y ventilación), los morfológicos y edificatorios y las características de las superficies (pavimentos). En coherencia con el objetivo propuesto el trabajo se desarrolla en cuatro fases: la primera aborda la revisión documental, literatura relevante e investigaciones relativas a la calidad ambiental, medio social, medio físico, el microespacio urbano, control y diseño sostenible, modelización proyectual y estrategias sostenibles; la segunda fase se refiere al marco contextual, características urbanas, datos climáticos locales, planes y procesos urbanos, tipologías y conformación urbana. En esta fase se describe el proceso de selección, análisis y evaluación urbano - ambiental de los casos de estudio (conjuntos residenciales). En la tercera fase se aborda el marco evaluativo y estudio de casos, consideraciones físicas, climáticas y valoración térmico - ambiental de los conjuntos residenciales seleccionados. En esta fase se aplican Técnicas Estadísticas y de Simulación Computacional y se analizan los resultados obtenidos. Finalmente, la cuarta fase propositiva incluye el establecimiento de Estrategias, Principios y Lineamientos de optimación térmica y se exponen las Conclusiones parciales de la tesis, alcances y perspectivas futuras. Finalmente, los resultados obtenidos en la investigación demuestran que el análisis en las experiencias de la realidad permiten comprobar que las situaciones y alteraciones ambientales sustanciales, los niveles de afectación térmica y las condiciones de confortabilidad e impacto derivan de las características urbanas, los componentes del microespacio y de las condiciones climáticas las cuales afectan el desarrollo de las actividades y el uso efectivo del microespacio entre edificios. El análisis de los factores morfo - climáticos incidentes y el estudio de los efectos de interacción contribuyen al establecimiento de Principios y Lineamientos para la evaluación y diseño sostenible del microespacio entre edificios y el uso correcto de los elementos del clima en estas áreas urbanas destinadas a la actividad social y al esparcimiento de la población residente. ABSTRACT This research starts from the problem of hot - humid climate zones where impacts related to thermal discomfort are produced as a result from the intense solar radiation and high temperatures and humidity. These factors reduce the quality of open spaces and people develop an attitude of rejection towards the use of urban microspace among buildings within urban developments - urban complexes - . Usually, these complexes admit solutions that apparently do not contribute to the achievement of common leisure activities in the resident dwellers. Therefore, the main purpose of this research is to deepen in the urban - environmental - social issue and urban design linked to the local morphological particularity, microclimate conditions, use of microspace and users’ requirements. In order to develop microclimate control strategies of microspace among buildings in hot - humid climate to look for optimal solutions that satisfy users’ needs of outdoors spaces in these residential areas. The research focuses in the study of contextual particularities related to microclimate and urban - morphotypological characteristics. Basically, microclimate (sunlight and ventilation), morphological and building factors as well as road surface characteristics. According to the proposed objective, this research is developed in four phases: the first one considers documentary review, relevant literature and researches related to environmental quality, social environment, physical environment, urban microspace, control and sustainable design, project modelling and sustainable strategies; while the second phase refers to contextual framework, urban characteristics, local climate data, plans and urban processes, typologies and urban structure. In this phase, the process of selection, analysis and urban - environmental evaluation of case studies (residential complexes) is described. The third phase approaches the assessment framework and case studies, physical and climate considerations as well as environmental - thermal evaluation of selected residential complexes. In this phase, statistical techniques and computational simulations are applied. Likewise, results obtained are analysed. Similarly, fourth and proposing phase includes the establishment of strategies, principles and guidelines of thermal optimization and partial conclusions of the thesis, scopes and future perspectives are exposed. Finally, from the results obtained, it is demonstrated that the analysis on reality experiences allow proving that situations and substantial environmental changes, levels of thermal affectations, comfort conditions and impact derive from urban characteristics, microspace components and from climate conditions which affect the development of activities and the effective use of microspace among buildings. The analysis of incidental morpho - climate factors and the study of interaction effects contribute to the establishment of principles and guidelines for the assessment and sustainable design of microspace among buildings as well as the correct use of climate elements in these urban areas oriented to social and leisure activities of resident population.

Energy requirements in pressure irrigation systems

Modernization of irrigation schemes, generally understood as transformation of surface irrigation systems into pressure –sprinkler and trickle- irrigation systems, aims at, among others, improving irrigation efficiency and reduction of operation and maintenance efforts made by the irrigators. However, pressure irrigation systems, in contrast, carry a serious energy cost. Energy requirements depend on decisions taken on management strategies during the operation phase, which are conditioned by previous decisions taken on the design project of the different elements which compose the irrigation system. Most of the countries where irrigation activity is significant bear in mind that modernization irrigation must play a key role in the agricultural infrastructure policies. The objective of this study is to characterize and estimate the mean and variation of the energy consumed by common types of irrigation systems and their management possibilities. The work includes all processes involved from the diversion of water into irrigation specific infrastructure to water discharge by the emitters installed on the crop fields. Simulation taking into account all elements comprising the irrigation system has been used to estimate the energy requirements of typical irrigation systems of several crop production systems. It has been applied to extensive and intensive crop systems, such us extensive winter crops, summer crops and olive trees, fruit trees and vineyards and intensive horticulture in greenhouses. The simulation of various types of irrigation systems and management strategies, in the framework imposed by particular cropping systems, would help to develop criteria for improving the energy balance in relation to the irrigation water supply productivity.

Hybridization Processes: The case of the urban game: Hybrid Hunt: Petrified

The proposal highlights certain design strategies and a case study that can link the material urban space to digital emerging realms. The composite nature of urban spaces ?material/ digital- is understood as an opportunity to reconfigure public urban spaces without high-cost, difficult to apply interventions and, furthermore, to reactivate them by inserting dynamic, interactive and playful conditions that engage people and re-establish their relations to the cities. The structuring of coexisting and interconnected material and digital aspects in public urban spaces is proposed through the implementation of hybridization processes. Hybrid spaces can fascinate and provoke the public and especially younger people to get involved and interact with physical aspects of urban public spaces as well as digital representations or interpretations of those. Digital game?s design in urban public spaces can be comprehended as a tool that allows architects to understand and to configure hybrids of material and digital conceptions and project all in one, as an inseparable totality. Digital technologies have for a long time now intervened in our perception of traditional dipoles such as subject - environment. Architects, especially in the past, have been responsible for material mediations and tangible interfaces that permit subjects to relate to their physical environments in a controlled and regulated manner; but, nowadays, architects are compelled to embody in design, the transition that is happening in all aspects of everyday life, that is, from material to digital realities. In addition, the disjunctive relation of material and digital realms is ceding and architects are now faced with the challenge that supposes the merging of both in a single, all-inclusive reality. The case study is a design project for a game implemented simultaneously in a specific urban space and on the internet. This project developed as the spring semester course New Media in Architecture at the Department of Architecture, Democritus University of Thrace, Greece is situated at the city of Xanthi. Composite cities can use design strategies and technological tools to configure augmented and appealing urban spaces that articulate and connect different realms in a single engaging reality.

Design Patterns in Software Maintenance: An Experiment Replication at UPM - Experiences with the RESER'11 Joint Replication Project

Replication of software engineering experiments is crucial for dealing with validity threats to experiments in this area. Even though the empirical software engineering community is aware of the importance of replication, the replication rate is still very low. The RESER'11 Joint Replication Project aims to tackle this problem by simultaneously running a series of several replications of the same experiment. In this article, we report the results of the replication run at the Universidad Politécnica de Madrid. Our results are inconsistent with the original experiment. However, we have identified possible causes for them. We also discuss our experiences (in terms of pros and cons) during the replication.

A hands-on education project: antenna design for inter-CubeSat communications

CubeSat platforms have become a de facto standard for universities willing to initiate space-technology activities with students. These small satellite platforms ease the implementation of hands-on education projects and opening the apertures of new research areas. Moreover, due to the limited volume (a 10 cm cube) and power (1 W), the application of imaginative solutions is mandatory. This leads to new innovation processes in the course of CubeSat projects. In this paper, we present a hands-on education project the aim of which is the specification, design, building and measurement of an antenna for communication between nanosatellites and, in particular, CubeSats. The project lies within the framework of ETSIT-UPM innovative education activities in the area of space technology, where students play a leading role in real engineering projects.

Conceptual design of liquid lithium laboratory in the TECHNOFUSION project

The Technofusion project involves the construction of a relevant set of scientific technical facilities in Madrid, providing new tools to fusion energy community.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Aspects of a phased array radar feed and bias network design

Radar technologies have been developed to improve the efficiency when detecting targets. Radar is a system composed by several devices connected and working together. Depending on the type of radar, the improvements are focused on different functionalities of the radar. One of the most important devices composing a radar is the antenna, that sends the radio-frequency signal to the space in order to detect targets. This project is focused on a specific type of radar called phased array radar. This type of radar is characterized by its antenna, which consist on a linear array of radiating elements, in this particular case, eight dipoles working at the frequency band S. The main advantage introduced by the phased array antenna is that using the fundamentals of arrays, the directivity of the antenna can change by shifting the phase of the signal at the input of each radiating element. This can be done using phase shifters. Phase shifter consists on a device which produces a phase shift in the radio-frequency input signal depending on a control DC voltage. Using a phased array antenna allows changing the directivity of the antenna without a mechanical rotating system. The objective of this project is to design the feed network and the bias network of the phased antenna. The feed network consists on a parallel-fed network composed by power dividers that sends the radio-frequency signal from the source to each radiating element of the antenna. The bias network consists on a system that generates the control DC voltages supplied to the phase shifters in order to change the directivity. The architecture of the bias network is composed by a software, implemented in Matlab and run in a laptop which is connected to a micro-controller by a serial communication port. The software calculates the control DC voltages needed to obtain a determined directivity or scan angle. These values are sent by the serial communication port to the micro-controller as data. Then the micro-controller generates the desired control DC voltages and supplies them to the phase shifters. In this project two solutions for bias network are designed. Each one is tested and final conclusions are obtained to determine the advantages and disadvantages. Finally a graphic user interface is developed in order to make the system easy to use. RESUMEN. Las tecnologías empleadas por lo dispositivos radar se han ido desarrollando para mejorar su eficiencia y usabilidad. Un radar es un sistema formado por varios subsistemas conectados entre sí. Por lo que dependiendo del tipo de radar las mejoras se centran en los subsistemas correspondientes. Uno de los elementos más importantes de un radar es la antena. Esta se emplea para enviar la señal de radiofrecuencia al espacio y así poder detectar los posibles obstáculos del entorno. Este proyecto se centra en un tipo específico de radar llamado phased array radar. Este tipo de radar se caracteriza por la antena que es un array de antenas, en concreto para este proyecto se trata de un array lineal de ocho dipolos en la banda de frequencia S. El uso de una antena de tipo phased array supone una ventaja importante. Empleando los fundamentos de radiación aplicado a array de antenas se obtiene que la directividad de la antena puede ser modificada. Esto se consigue aplicando distintos desfasajes a la señal de radiofrecuencia que alimenta a cada elemento del array. Para aplicar los desfasajes se emplea un desplazador de fase, este dispositivo aplica una diferencia de fase a su salida con respecto a la señal de entrada dependiendo de una tensión continua de control. Por tanto el empleo de una antena de tipo phased array supone una gran ventaja puesto que no se necesita un sistema de rotación para cambiar la directividad de la antena. El objetivo principal del proyecto consiste en el diseño de la red de alimentación y la red de polarización de la antena de tipo phased array. La red de alimentación consiste en un circuito pasivo que permite alimentar a cada elemento del array con la misma cantidad de señal. Dicha red estará formada por divisores de potencia pasivos y su configuración será en paralelo. Por otro lado la red de polarización consiste en el diseño de un sistema automático que permite cambiar la directividad de la antena. Este sistema consiste en un programa en Matlab que es ejecutado en un ordenador conectado a un micro-controlador mediante una comunicación serie. El funcionamiento se basa en calcular las tensiones continuas de control, que necesitan los desplazadores de fase, mediante un programa en Matlab y enviarlos como datos al micro-controlador. Dicho micro-controlador genera las tensiones de control deseadas y las proporciona a cada desplazador de fase, obteniendo así la directividad deseada. Debido al amplio abanico de posibilidades, se obtienen dos soluciones que son sometidas a pruebas. Se obtienen las ventajas y desventajas de cada una. Finalmente se implementa una interfaz gráfica de usuario con el objetivo de hacer dicho sistema manejable y entendible para cualquier usuario.

Supporting the design and development of Project Based Learning courses.

The use of Project Based Learning has spread widely over the last decades, not only throughout countries but also among disciplines. One of the most significant characteristics of this methodology is the use of ill-structured problems as central activity during the course, which represents an important difficulty for both teachers and students. This work presents a model, supported by a tool, focused on helping teachers and students in Project Based Learning, overcoming these difficulties. Firstly, teachers are guided in designing the project following the main principles of this methodology. Once the project has been specified at the desired level of depth, the same tool helps students to finish the project specification and organize the implementation. Collaborative work among different users is allowed in both phases. This tool has been satisfactorily tested designing two real projects used in Computer Engineering and Software Engineering degrees.