Generic competences in engineering field: a comparative study between Latin America and European Union

In this work, a comparison between the competences codes in the CDIÓs* curriculum, the ones defined for the Tunning Project and the International Project Management Association (IPMA) is made. The goal is to define the most appropriate competences codes for the engineering education in Latin America. The CDIO code is obtained from the engineering practice, and responds to the Accreditation Board for Engineering and Technology (ABET) standards of accreditation. The Tuning competences are the ones defined for Latin America and the IPMÁs are international competences for project management. It is the first time that the competences defined in ABET accreditation standards in the engineering field are compared with the international competences according to IPMÁs model. The results give evidence that, in first place, there is a need to apply holistic models in the definition of an engineering curriculum. Second, the pertinence of these models in the definition of engineering programs in Latin America.

Local relevancy evaluation in the accreditation bodies for engineering master's programs

Accreditation models in the international context mainly consider the evaluation of learning outcomes and the ability of programs (or higher education institutions) to achieve the educational objectives stated in their mission. However, it is not clear if these objectives and therefore their outcomes satisfy real national and regional needs, a critical point in engineering master's programs, especially in developing countries. The aim of this paper is to study the importance of the local relevancy evaluation of these programs and to analyze the main models of quality assurance and accreditation bodies of USA, Europe and Latin America, in order to ascertain whether the relevancy is evaluated or not. After a literature review, we found that in a free-market economic context and international education, the accreditation of master’s programs follows an international accreditation model, and doesn´t take in account in most cases criteria and indicators for local relevancy. It concludes that it is necessary both, international accreditation to ensure the effectiveness of the program (achievement of learning outcomes) and the national accreditation through which it could ensure local relevancy of programs, for which we are giving some indicators.

Size, strain, and band offset engineering in GaAs(Sb)(N)-capped InAs quantum dots for 1.3 - 1.55 µm LEDs and LDs

The optical and structural properties of InAs/GaAs quantum dots (QD) are strongly modified through the use of a thin (~ 5 nm) GaAsSb(N) capping layer. In the case of GaAsSb-capped QDs, cross-sectional scanning tunnelling microscopy measurements show that the QD height can be controllably tuned through the Sb content up to ~ 14 % Sb. The increased QD height (together with the reduced strain) gives rise to a strong red shift and a large enhancement of the photoluminescence (PL) characteristics. This is due to improved carrier confinement and reduced sensitivity of the excitonic bandgap to QD size fluctuations within the ensemble. Moreover, the PL degradation with temperature is strongly reduced in the presence of Sb. Despite this, emission in the 1.5 !lm region with these structures is only achieved for high Sb contents and a type-II band alignment that degrades the PL. Adding small amounts of N to the GaAsSb capping layer allows to progressively reduce the QD-barrier conduction band offset. This different strategy to red shift the PL allows reaching 1.5 !lm with moderate Sb contents, keeping therefore a type-I alignment. Nevertheless, the PL emission is progressively degraded when the N content in the capping layer is increased

An optimization method for conceptual design in engineering systems based on high order singular value decomposition

Se presenta un nuevo método de diseño conceptual en Ingeniería Aeronáutica basado el uso de modelos reducidos, también llamados modelos sustitutos (‘surrogates’). Los ingredientes de la función objetivo se calculan para cada indiviudo mediante la utilización de modelos sustitutos asociados a las distintas disciplinas técnicas que se construyen mediante definiciones de descomposición en valores singulares de alto orden (HOSVD) e interpolaciones unidimensionales. Estos modelos sustitutos se obtienen a partir de un número limitado de cálculos CFD. Los modelos sustitutos pueden combinarse, bien con un método de optimización global de tipo algoritmo genético, o con un método local de tipo gradiente. El método resultate es flexible a la par que mucho más eficiente, computacionalmente hablando, que los modelos convencionales basados en el cálculo directo de la función objetivo, especialmente si aparecen un gran número de parámetros de diseño y/o de modelado. El método se ilustra considerando una versión simplificada del diseño conceptual de un avión. Abstract An optimization method for conceptual design in Aeronautics is presented that is based on the use of surrogate models. The various ingredients in the target function are calculated for each individual using surrogates of the associated technical disciplines that are constructed via high order singular value decomposition and one dimensional interpolation. These surrogates result from a limited number of CFD calculated snapshots. The surrogates are combined with an optimization method, which can be either a global optimization method such as a genetic algorithm or a local optimization method, such as a gradient-like method. The resulting method is both flexible and much more computationally efficient than the conventional method based on direct calculation of the target function, especially if a large number of free design parameters and/or tunablemodeling parameters are present. The method is illustrated considering a simplified version of the conceptual design of an aircraft empennage.

Análisis bibliométrico de las publicaciones científicas colombianas en la categoría Engineering, Multidisciplinary en la base de datos del Web of Science (1997-2009)

El trabajo ha caracterizado el área de Engineering, Multidisciplinary en Colombia, revisándose a nivel institucional a través de la base de datos Web of Science, los trabajos realizados por investigadores en universidades colombianas, y publicados en revistas internacionales con factor de impacto entre 1997 y 2009. En el contexto de América Latina se han publicado 2, 195 trabajos del tipo artículo o revisión en 83 revistas, y a nivel de Colombia se han encontrado 419 artículos publicados en 23 revistas. También se han analizado las Universidades mediante indicadores bibliométricos (Factor de Impacto Ponderado y Relativo y el número medio de citas por documento), encontrándose toda la producción científica localizada en 37 Universidades y destacando la Universidad Nacional de Colombia por el número de documentos, la Universidad Pontificia Bolivariana por la ratio citas frente a documentos, y la Universidad Pedagógica y Tecnológica de Colombia por el Factor de Impacto.

Análisis bibliométrico de las publicaciones científicas mexicanas en la categoría de Engineering, Chemical en la base de datos del Web of Science (1997-2008)

El proposito del trabajo ha sido caracterizar el área de Ingeniería Química en México. Para ello, se ha revisado a nivel institucional, a través de la base de datos Web of Science (WoS), los trabajos sobre Ingeniería Química realizados por investigadores en Instituciones mexicanas y publicados en revistas internacionales con factor de impacto entre 1997 y 2008. Se ha partido del contexto de América Latina, donde se han publicado 6,183 trabajos del tipo artículo o revisión en 119 revistas, y a nivel de México se han encontrado 1,302 artículos publicados en 87 revistas la mayoría en inglés (96.08%), pero también en español (3.69%) y en francés (0.23%). Por otro lado, se han analizado las Universidades y Centros de Investigación desde el punto de vista cuantitativo y cualitativo mediante diversos indicadores bibliométricos como el Factor de Impacto Ponderado, el Factor de Impacto Relativo y la relación entre el número de citas y el número de documentos, encontrándose que de entre las cinco instituciones más productivas destaca el Instituto Mexicano del Petróleo por el número de documentos y la Universidad Nacional Autónoma de México por la relación citas frente a documentos, y por el Factor de Impacto Ponderado.

Análisis bibliométrico de las publicaciones científicas uruguayas en la categoría Engineering, Chemical en la base de datos Web of Science (1997-2008)

El prop´osito del trabajo ha sido caracterizar el ´area de Ingenier´ıa Qu´ımica en M´exico. Para ello, se ha revisado a nivel institucional, a trav´es de la base de datos Web of Science (WoS), los trabajos sobre Ingenier´ıa Qu´ımica realizados por investigadores en Instituciones mexicanas y publicados en revistas internacionales con factor de impacto entre 1997 y 2008. Se ha partido del contexto de Am´erica Latina, donde se han publicado 6,183 trabajos del tipo art´ıculo o revisi´on en 119 revistas, y a nivel de M´exico se han encontrado 1,302 art´ıculos publicados en 87 revistas la mayor´ıa en ingl´es (96.08%), pero tambi´en en espa˜nol (3.69%) y en franc´es (0.23%). Por otro lado, se han analizado las Universidades y Centros de Investigaci´on desde el punto de vista cuantitativo y cualitativo mediante diversos indicadores bibliom´etricos como el Factor de Impacto Ponderado, el Factor de Impacto Relativo y la relaci´on entre el n´umero de citas y el n´umero de documentos, encontr´andose que de entre las cinco instituciones m´as productivas destaca el Instituto Mexicano del Petr´oleo por el n´umero de documentos y la Universidad Nacional Aut´onoma de M´exico por la relaci´on citas frente a documentos, y por el Factor de Impacto Ponderado

Engineering research to improve fruit quality

Consumers demand high quality fruit. But how do farmers, wholesalers and retailers assess quality nondestructively? A multi-national team of researchers believe that they can provide the answers.

Introduction: Ontology Engineering in a Networked World

While ontology engineering is rapidly entering the mainstream, expert ontology engineers are a scarce resource. Hence, there is a need for practical methodologies and technologies, which can assist a variety of user types with ontology development tasks. To address this need, this book presents a scenario-based methodology, the NeOn Methodology, which provides guidance for all main activities in ontology engineering. The context in which we consider these activities is that of a networked world, where reuse of existing resources is commonplace, ontologies are developed collaboratively, and managing relationships between ontologies becomes an essential aspect of the ontological engineering process. The description of both the methodology and the ontology engineering activities is grounded in a comprehensive software environment, the NeOn Toolkit and its plugins, which provides integrated support for all the activities described in the book. Here we provide an introduction for the whole book, while the rest of the content is organized into 4 parts: (1) the NeOn Methodology Framework, (2) the set of ontology engineering activities, (3) the NeOn Toolkit and plugins, and (4) three use cases. Primary goals of this book are (a) to disseminate the results from the NeOn project in a structured and comprehensive form, (b) to make it easier for students and practitioners to adopt ontology engineering methods and tools, and (c) to provide a textbook for undergraduate and postgraduate courses on ontology engineering.

Scheduling Ontology Engineering Projects Using gOntt

In order to manage properly ontology development projects in complex settings and to apply correctly the NeOn Methodology, it is crucial to have knowledge of the entire ontology development life cycle before starting the development projects. The ontology project plan and scheduling helps the ontology development team to have this knowledge and to monitor the project execution. To facilitate the planning and scheduling of ontology development projects, the NeOn Toolkit plugin called gOntt has been developed. gOntt is a tool that supports the scheduling of ontology network development projects and helps to execute them. In addition, prescriptive methodological guidelines for scheduling ontology development projects using gOntt are provided.

The NeOn Methodology for Ontology Engineering

In contrast to other approaches that provide methodological guidance for ontology engineering, the NeOn Methodology does not prescribe a rigid workflow, but instead it suggests a variety of pathways for developing ontologies. The nine scenarios proposed in the methodology cover commonly occurring situations, for example, when available ontologies need to be re-engineered, aligned, modularized, localized to support different languages and cultures, and integrated with ontology design patterns and non-ontological resources, such as folksonomies or thesauri. In addition, the NeOn Methodology framework provides (a) a glossary of processes and activities involved in the development of ontologies, (b) two ontology life cycle models, and (c) a set of methodological guidelines for different processes and activities, which are described (a) functionally, in terms of goals, inputs, outputs, and relevant constraints; (b) procedurally, by means of workflow specifications; and (c) empirically, through a set of illustrative examples.

Un análisis de la movilidad de los investigadores universitarios : caso "Electrical Engineering" en el mundo

En el presente trabajo se ha intentado obtener una visión, lo más exacta posible, de cuál ha sido el currículo académico seguido por los miembros de algunas de las universidades más prestigiosas en todo el mundo. Para ello se han tomado 36 centros, todos ellos impartiendo la misma titulación de "Electrical Engineering", situados entre los 50 más importantes del mundo.

Some framework ideas for software engineering education

This paper presents various ideas aimed at improving the conceptual framework for Software Engineering Education. They are centered on gradually seeing Software Engineering through a 3-p (problem-process-product), a 4-p (people (producars)-problem,process,product) and a 5-p (people (producers)-"problem, process, product, people (users)diagram. These diagrams include concepts such as the rate of change of a problem, the relational complexity of a problem, triphase processes with dominant phases, degrees of software evolution,levels of complexity (with the recognition of disorganized complexity), among others.

Assesing the usefulness of the ACM/IEEE-CS Computing Curricula for the design of Computer-Related Engineering Curricula, an experience in Telematics

This paper presents the rationale to build up a Telematics Engineering curriculum. Telematics is a strongly computing oriented area; then, the authors have initially intended to apply the common requirements described in the computing curricula elaborated by the ACM/EEEE-CS Joint Curriculum Task Force. This experience has revealed some problematic aspects in the ACM/IEEE-CS proposal. From the analysis of these problems, a model to guide the selection and specially the approach of the Telematics curriculum contents is proposed. This model can be easily generalized to other strongly computing oriented curricula, whose number is growing everyday

Systems in Engineering Education: account of an experience

Systems Engineering (SE in the following) has not received much attention as a subject matter in engineering curricula. There are several dozens of universities around the world offering programs (most of them at the graduate level) on systems science and engineering. However, SE is, per se, rarely found among the courses offered by engineering schools. This observation does not strictly mean that systems concepts be left apart. For example, it is usual to find specialized courses for systems of some particular classes (e.g., courses on software systems engineering for computing curricula) or for particular phases of the system life cycle (e.g., courses on systems analysis). Even so, these kinds of courses tend to over-emphasize the importance of specific methodologies and, in consequence, to deviate the attention from the realm of systernness