Thermodynamical Phase Noise in Oscillators Based on L-C Resonators

Using a new Admittance-based model for electrical noise able to handle Fluctuations and Dissipations of electrical energy, we explain the phase noise of oscillators that use feedback around L-C resonators. We show that Fluctuations produce the Line Broadening of their output spectrum around its mean frequency f0 and that the Pedestal of phase noise far from f0 comes from Dissipations modified by the feedback electronics. The charge noise power 4FkT/R C2/s that disturbs the otherwise periodic fluctuation of charge these oscillators aim to sustain in their L-C-R resonator, is what creates their phase noise proportional to Leeson’s noise figure F and to the charge noise power 4kT/R C2/s of their capacitance C that today’s modelling would consider as the current noise density in A2/Hz of their resistance R. Linked with this (A2/Hz?C2/s) equivalence, R becomes a random series in time of discrete chances to Dissipate energy in Thermal Equilibrium (TE) giving a similar series of discrete Conversions of electrical energy into heat when the resonator is out of TE due to the Signal power it handles. Therefore, phase noise reflects the way oscillators sense thermal exchanges of energy with their environment.

Thermodynamical Phase Noise in Oscillators Based on L-C Resonators (Foundations)

Using a new Admittance-based model for electrical noise able to handle Fluctuations and Dissipations of electrical energy, we explain the phase noise of oscillators that use feedback around L-C resonators. We show that Fluctuations produce the Line Broadening of their output spectrum around its mean frequency f0 and that the Pedestal of phase noise far from f0 comes from Dissipations modified by the feedback electronics. The charge noise power 4FkT/R C2/s that disturbs the otherwise periodic fluctuation of charge these oscillators aim to sustain in their L-C-R resonator, is what creates their phase noise proportional to Leeson’s noise figure F and to the charge noise power 4kT/R C2/s of their capacitance C that today’s modelling would consider as the current noise density in A2/Hz of their resistance R. Linked with this (A2/Hz?C2/s) equivalence, R becomes a random series in time of discrete chances to Dissipate energy in Thermal Equilibrium (TE) giving a similar series of discrete Conversions of electrical energy into heat when the resonator is out of TE due to the Signal power it handles. Therefore, phase noise reflects the way oscillators sense thermal exchanges of energy with their environment

Intrusion-Resilient Integrity in Data-Centric Unattended WSNs

Unattended Wireless Sensor Networks (UWSNs) operate in autonomous or disconnected mode: sensed data is collected periodically by an itinerant sink. Between successive sink visits, sensor-collected data is subject to some unique vulnerabilities. In particular, while the network is unattended, a mobile adversary (capable of subverting up to a fraction of sensors at a time) can migrate between compromised sets of sensors and inject fraudulent data. In this paper, we provide two collaborative authentication techniques that allow an UWSN to maintain integrity and authenticity of sensor data-in the presence of a mobile adversary-until the next sink visit. Proposed schemes use simple, standard, and inexpensive symmetric cryptographic primitives, coupled with key evolution and few message exchanges. We study their security and effectiveness, both analytically and via simulations. We also assess their robustness and show how to achieve the desired trade-off between performance and security.

A new way of teaching different subjects in a foreign language in the Building Engineering Degree at the Universidad Politécnica.

The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.

Impacto del vehículo eléctrico sobre las redes de distribución

Es objeto del presente proyecto definir red inteligente (Smart Grid) como parte fundamental de un futuro sistema de generación, distribución y transporte de la energía, utilizando como medio principal de desplazamiento el Vehículo Eléctrico. El desarrollo del proyecto se lleva a cabo a través de un análisis exhaustivo del impacto de la introducción masiva del Vehículo Eléctrico en las redes de distribución. Para evaluar las simulaciones se han creado unos niveles de penetración de vehículos, así como el despliegue de dispositivos de recarga y hora óptima de conexión a la red para que la curva de demanda se suavice lo máximo posible y las infraestructuras eléctricas no sufran una sobrecarga provocando una caída del sistema eléctrico. Con un software específico, se ha obtenido un porcentaje de pérdidas y se han sacado unas conclusiones para los distintos casos de penetración del vehículo eléctrico. Asimismo, se ha analizado la implementación de un sistema que estudie los intercambios energéticos que se producen entre los diferentes sistemas del vehículo, y entre éste y su entorno para poder disminuir las pérdidas. ABSTRACT The objective of this project is to define Smart Grid as an essential part of a future generation system, distribution and transmission of energy, using Electric Vehicle as primary mean of moving. The development of this project was carried out through a comprehensive analysis of the impact of the massive introduction of electric vehicles in distribution networks. To evaluate the simulations, different indicators for vehicle´s penetration were created, as well as the deployment of charging devices and optimal time to get network connection in order to smooth the demand curve as much as possible and to avoid electrical infrastructure being overloaded and thus causing the electrical system to stop working. For each of the different cases of electric vehicles’ penetration a percentage of losses and conclusions were drawn using specific software. The implementation of a system that studies the exchanges of energy that occur between different vehicle systems and between itself and its environment to reduce losses was also analyzed.

A study of four listed micro finance institutions

Compared to the size of the microfinance market, the number of Microfinance Institutions that are professionally ran like commercial banks is still scarce, and even more scarce are the MFI listed in public stock exchanges. This document focuses on four listed MFIs and reviews its business model and funding sources. The document also analyses the market price evolution of the listed shares and investigates whether investors are assigning a premium to the MFIs compared with its respective market indices. Keywords: Microfinance institutions, Micro-credits, Financial Institutions, Equity; Stock Exchange.

A constraint-based approach to quality assurance in service choreographies.

Knowledge about the quality characteristics (QoS) of service com- positions is crucial for determining their usability and economic value. Ser- vice quality is usually regulated using Service Level Agreements (SLA). While end-to-end SLAs are well suited for request-reply interactions, more complex, decentralized, multiparticipant compositions (service choreographies) typ- ically involve multiple message exchanges between stateful parties and the corresponding SLAs thus encompass several cooperating parties with interde- pendent QoS. The usual approaches to determining QoS ranges structurally (which are by construction easily composable) are not applicable in this sce- nario. Additionally, the intervening SLAs may depend on the exchanged data. We present an approach to data-aware QoS assurance in choreographies through the automatic derivation of composable QoS models from partici- pant descriptions. Such models are based on a message typing system with size constraints and are derived using abstract interpretation. The models ob- tained have multiple uses including run-time prediction, adaptive participant selection, or design-time compliance checking. We also present an experimen- tal evaluation and discuss the benefits of the proposed approach.

Commonalities between networking in multiplayer computer games and negotiation processes in a future multi-layered Air Traffic Management (ATM) system

First, this paper describes a future layered Air Traffic Management (ATM) system centred in the execution phase of flights. The layered ATM model is based on the work currently performed by SESAR [1] and takes into account the availability of accurate and updated flight information ?seen by all? across the European airspace. This shared information of each flight will be referred as Reference Business Trajectory (RBT). In the layered ATM system, exchanges of information will involve several actors (human or automatic), which will have varying time horizons, areas of responsibility and tasks. Second, the paper will identify the need to define the negotiation processes required to agree revisions to the RBT in the layered ATM system. Third, the final objective of the paper is to bring to the attention of researchers and engineers the communalities between multi-player games and Collaborative Decision Making processes (CDM) in a layered ATM system

Simulation of Temperatures and Stresses during Construction of a RCC Dam

Se describen las variaciones de temperaturas y de tensiones durante la construcción de presas de hormigón compactado. The curing of concrete is an exothermic process. The heat of hydration generated induces temperature increases in the concrete, which will disappear in the long term by heat conduction in the concrete mass and thermal exchanges with the environment. The problem is of particularly interest for large concrete masses, as is the case of dams, because the time involved in the heat diffusion process grows with the square of the dimensions and a hotter dam interior implies the possibility of cracking the exposed surfaces of the dam. The Cuira dam, currently being built in Venezuela using roller compacted concrete, is a 134 m high, arch-gravity dam. In support of the design, different strategies were analysed, including various combinations of cooling of the water and the aggregate in order to achieve acceptable results. The calculations were conducted with Abaqus, taking into account all the necessary mechanical and thermal characteristics, as well as the relevant non-linearities. The analyses led to the conclusion that no cooling was required, even taking into account the stress state imposed by an early and rapid filling of the reservoir.

Medidas de la eficacia de los sistemas de intercambio electrónico de datos basados en la especificación ASD 2000M

La Especificación Aeroespacial y de Defensa 2000M, también conocida como S2000M, es un protocolo de intercambio electrónico de datos utilizado en el apoyo logístico de equipos de defensa. La S2000M, resultado de un trabajo conjunto entre Fuerzas Armadas (FFAA) y empresas de Naciones diversas desarrollado durante las últimas cuatro décadas, define tanto los procesos para la adquisición y mantenimiento de componentes militares, como los mensajes normalizados en apoyo de dichos procesos. Equipos de trabajo constituidos por representantes de las citadas FFAA e industria mantienen actualizada la S2000M, por lo que el protocolo evoluciona continuamente con objeto de adaptarse a las necesidades que puedan surgir. Como consecuencia de dicha actualización, existen diversas versiones de la S2000M actualmente en servicio, y este trabajo se basa en la versión denominada 2.1, si bien, una parte importante de las conclusiones del estudio pueden aplicarse a otras versiones del protocolo. A través de los años, la S2000M se ha convertido en un elemento esencial del comercio electrónico de piezas de repuesto y de servicios de mantenimiento y reparación de modernos sistemas aeronáuticos Europeos tales como los aviones de combate Typhoon, Tornado y Rafale, el avion de transporte A400M y los helicópteros NH90 y Tiger, por lo que la S2000M constituye un elemento esencial en el apoyo logístico necesario para asegurar la disponibilidad operativa de dichos sistemas. Así mismo, la S2000M juega un papel fundamental en el comercio electrónico entre las principales empresas aeronáuticas europeas y las organizaciones logísticas de defensa de Naciones tales como Alemania, España, Francia, Holanda, Italia, etc. En consecuencia, la importancia de la S2000M en aspectos tales como logística, nivel de operatividad de los sistemas de armas mencionados, comercio electrónico y sistemas de información es manifiesta, por lo que resulta necesario evaluar la eficacia y eficiencia del protocolo para optimizarlo al máximo. Con este propósito, el presente trabajo estudia la S2000M con objeto de encontrar una respuesta a la pregunta que ha constituido la base de la investigación: ¿Cómo medir el éxito de la Especificación Aeroespacial y de Defensa S2000M? Como la S2000M se utiliza para intercambiar información logística en formato electrónico entre organizaciones y entidades por medio de documentos estructurados y de procesos automatizados, los sistemas de información juegan un papel fundamental en este trabajo. En consecuencia, la base teoríca para tratar de responder a la pregunta anteriormente citada se sustenta en las investigaciones en curso sobre el éxito de los sistemas de información, adaptadas a la problemática específica del protocolo S2000M. Para finalizar, es importante mencionar que debido a que la investigación sobre la S2000M es prácticamente inexistente, este trabajo se centra en un área específica de conocimiento hasta ahora casi inexplorada. El resultado de la investigación se materializa en una serie de propuestas teoricas y prácticas con las que se contribuyen al desarrollo de tres áreas de conocimiento: S2000M, Sistemas de Información e Intercambio Electrónico de Datos. Asimismo, se proponen nuevas áreas de estudio en las tres áreas mencionadas. ABSTRAC The Aerospace and Defence Specification 2000M, in short S2000M, is an Electronic Data Interchange (EDI) standard used in the logistic support of defence equipment. The S2000M is the result of the joint effort undertaken by the Armed Forces and industry of several Nations over the last four decades. The protocol defines the business processes for the supply, maintenance and repair of military components, as well as the standard messages on support of the said processes. Representatives from industry and military keep the S2000M up-to-date and therefore, the protocol evolves continuously to support new requirements that may arise. Consequently, there are different versions of the standard currently available and this study is about one of them, precisely, Revision 2.1; however, many of the research outcomes are also be valid for other versions of the protocol. Through the years, the S2000M has become an essential element for the electronic trade of spare parts and repair services on support of modern European aeronautical systems such as the fighters Typhoon, Tornado and Rafale, the airlifter A400M and the helicopters NH90 and Tiger. As a result, the S2000M is at the center of the logistic support required to ensure the operational availability of these systems. Further, the protocol plays a key role in the electronic exchanges among main European aeronautical players and defence logistics organizations from Nations such as France, Germany, Italy, Netherlands, Spain, etc. Therefore, the significance of the S2000M on the operational availability of the mentioned weapon systems, and in logistics, electronic business and Information Systems (IS) terms is noticeable, and it is then worth evaluating how the S2000M is doing with respect to its effectiveness and efficiency in order to improve these two areas as much as possible. To this end, this work analyzes the S2000M with the aim to find a response to the following research question: How to measure the success of the Aerospace and Defence Specification 2000M? As in the end the S2000M is about the electronic exchange of logistics information among organizations and firms by means of standard messages and processes automation, IS are at the core of this dissertation. For that reason, the theoretical foundation to tackle the research question rests on the ongoing stream of research on IS success, which will be extended to take into consideration the S2000M standpoint as well. Last, it is worth noting that due to the practically inexistent research on the S2000M M, this investigation help filling a gap in this domain. The outcomes from this study materialize in a number of conceptual and practical proposals that contribute to the theory and practice on three main knowledge areas, that is, S2000M, IS and EDI. Further, this work opens the door for further research in the said or related fields.

New data on the Pleistocene of Trani (Adriatic Coast, Southern Italy)

Along the Apulian Adriatic coast, in a cliff south of Trani, a succession of three units (superimposed on one another) of marine and/or paralic environments has been recognised. The lowest unit I is characterised by calcareous/siliciclastic sands (css), micritic limestones (ml), stromatolitic and characean boundstones (scb), characean calcarenites (cc). The sedimentary environment merges from shallow marine, with low energy and temporary episodes of subaerial exposure, to lagoonal with a few exchanges with the sea. The lagoonal stromatolites (scb subunit) grew during a long period of relative stability of a high sea level in tropical climate. The unit I is truncated at the top by an erosion surface on which the unit II overlies; this consists of a basal pebble lag (bpl), silicicla - stic sands (ss), calcareous sands (cs), characean boundstones (cb), brown paleosol (bp). The sedimentary environment varies from beach to lagoon with salinity variations. Although there are indications of seismic events within the subunits cs, unit II deposition took place in a context of relative stability. The unit II is referable to a sea level highstand. Unit III, trangressive on the preceding, consists of white calcareous sands (wcs), calcareous sands and calcarenites (csc), phytoclastic calcirudite and phytohermal travertine (pcpt), mixed deposits (csl, m, k, c), sands (s) and red/brown paleosols (rbp). The sedimentation of this unit was affected by synsedimentary tectonic, attested by seismites found at several heights. Also the unit III is referable to a sea level highstand. The scientific literature has so far generally attributed to the Tyrrhenian (auct.) the deposits of Trani cliff. As part of this work some datings were performed on 10 samples, using the amino acid racemization method (AAR) applied to ostracod carapaces. Four of these samples have been rejected because they have shown in laboratory recent contamination. The numerical ages indicate that the deposits of the Trani cliff are older than MIS 5. The upper part of the unit I has been dated to 355±85 ka BP, thus allowing to assign the lowest stromatolitic subunit (scb) at the MIS 11 peak and the top of the unit I at the MIS 11-MIS 10 interval. The base of the unit II has been dated to 333±118 ka BP, thus attributing the erosion surface that bounds the units I and II to the MIS 10 lowstand and the lower part of the unit II to MIS 9.3. The upper part of the unit II has been dated to 234±35 ka BP, while three other numerical ages come from unit III: 303±35, 267±51, 247±61 ka BP. At present, the numerical ages cannot distinguish the sedimentation ages of units II and III, which are both related to the MIS 9.3- MIS 7.1 time range. However, the position of the units, superimposed one another, and their respective age, allows us to recognise a subsidence phase between MIS 11 and MIS 7, followed by an uplift phase between the MIS 7 and the present day, which led the deposits in their current position. This tectonic pattern is not in full agreement with what is described in the literature for the Apulian foreland.