Alternative method for the metrological characterization of spur gears in the sub-millimeter range using optical equipment

The aim of this work is to develop a software that allows the inspection of spur gear manufactured in the sub-millimeter range. The measurements are made using a digital optical machine and using an analysis proprietary software implemented in Matlab®, which is able to handle images, captured using the digital optical machine. The software allows to evaluate the profile and pitch deviations as establish in the ISO/TR 10064-1:1992 standard

Signal analysis and feature generation for pattern identification of partial discharges in high-voltage equipment

This paper proposes a method for the identification of different partial discharges (PDs) sources through the analysis of a collection of PD signals acquired with a PD measurement system. This method, robust and sensitive enough to cope with noisy data and external interferences, combines the characterization of each signal from the collection, with a clustering procedure, the CLARA algorithm. Several features are proposed for the characterization of the signals, being the wavelet variances, the frequency estimated with the Prony method, and the energy, the most relevant for the performance of the clustering procedure. The result of the unsupervised classification is a set of clusters each containing those signals which are more similar to each other than to those in other clusters. The analysis of the classification results permits both the identification of different PD sources and the discrimination between original PD signals, reflections, noise and external interferences. The methods and graphical tools detailed in this paper have been coded and published as a contributed package of the R environment under a GNU/GPL license.

Criteria for Positioning Active Multilateration Stations Located Close to Distance Measuring Equipment

The need for the use of another surveillance system when radar cannot be used is the reason for the development of the Multilateration (MLT) Systems. However, there are many systems that operate in the L-Band (960-1215MHz) that could produce interference between systems. At airports, some interference has been detected between transmissions of MLT systems (1030MHz and 1090MHz) and Distance Measuring Equipment (DME) (960-1215MHz).

Development of FEM/BEM and SEA models from experimental results for structural elements with attached equipment

This work focuses on the analysis of a structural element of MetOP-A satellite. Given the special interest in the influence of equipment installed on structural elements, the paper studies one of the lateral faces on which the Advanced SCATterometer (ASCAT) is installed. The work is oriented towards the modal characterization of the specimen, describing the experimental set-up and the application of results to the development of a Finite Element Method (FEM) model to study the vibro-acoustic response. For the high frequency range, characterized by a high modal density, a Statistical Energy Analysis (SEA) model is considered, and the FEM model is used when modal density is low. The methodology for developing the SEA model and a compound FEM and Boundary Element Method (BEM) model to provide continuity in the medium frequency range is presented, as well as the necessary updating, characterization and coupling between models required to achieve numerical models that match experimental results.

Testing equipment for the improvement of mechanical devices to minimize damage to fruit in commercial packing lines.

Damages -reduced in fruit packing lines is a major cause of grace reduction and quality loos in fresh marks: fruit. Fruit must be treated gently during in sir handling to improve their qualityin order to get a good price in a competitive market. The correct post-hardvest handling in fruit packing lines is a prerequisite to cut down the heavy post-harvest losses. Fruit packing lines must be evaluated, studying their design, the impacts applied to the fruits, the characteristics of the materials, etc. This study establishes the possibility of carrying out modifications and tests in a packing line during a long period of time. For this purpose, an experimental fruit packing line has been designed and located in the Agricultural Engineering Department of the Polythecnic University of Madrid with the aim of improving mechanical devices and fruit handling conditions to minimize damage to fruit. The experimental line consists of several transporting belts, one rollers transporter, one sizer, one elevator, one singularizer, and three trays to receive the calibrated fruit. The line has a length of 6.15 m and a width cf 1.9 m. Movement of the different components is regulated by electric motors with variable velocity electronically controlled. The height of the transfer points is variable and can be easily modified. The experimental line has been calibrated using two instrumented spheres IS 100 (8.8 cm Ø and6.2cm Ø). Average acceleration values obtained in all the transfers of the experimental line lay under 80 g's, although there is big variation for some of them being some values above 100 g's.

A novel scanning lens instrument for evaluating Fresnel lens performance: equipment development and initial results

A system dedicated to the optical transmittance characterization of Fresnel lenses has been developed at NREL, in collaboration with the UPM. The system quantifies the optical efficiency of the lens by generating a performance map. The shape of the focused spot may also be analyzed to understand change in the lens performance. The primary instrument components (lasers and CCD detector) have been characterized to confirm their capability for performing optical transmittance measurements. Measurements performed on SoG and PMMA lenses subject to a variety of indoor conditions (e.g., UV and damp heat) identified differences in the optical efficiency of the evaluated lenses, demonstrating the ability of the Scanning Lens Instrument (SLI) to distinguish between the aged lenses.

Signal analysis and feature generation for pattern identification of partial discharges in high-voltage equipment

This paper proposes a method for the identification of different partial discharges (PDs) sources through the analysis of a collection of PD signals acquired with a PD measurement system. This method, robust and sensitive enough to cope with noisy data and external interferences, combines the characterization of each signal from the collection, with a clustering procedure, the CLARA algorithm. Several features are proposed for the characterization of the signals, being the wavelet variances, the frequency estimated with the Prony method, and the energy, the most relevant for the performance of the clustering procedure. The result of the unsupervised classification is a set of clusters each containing those signals which are more similar to each other than to those in other clusters. The analysis of the classification results permits both the identification of different PD sources and the discrimination between original PD signals, reflections, noise and external interferences. The methods and graphical tools detailed in this paper have been coded and published as a contributed package of the R environment under a GNU/GPL license.

Survey on student motivation and approval of educational environment at Universidad Politécnica de Madrid within the European Higher Education area implementation

A recent study elaborated by Vicerrectorado de Ordenación Académica y Planificación Estratégica of Technical University of Madrid (UPM) defines the satisfaction of the university student body as "the response that the University offers to the expectations and demands of service of the students, considered in a general way ". Besides an indicator of academic and institutional insertion of the student, the assessment of student engagement allows us to adapt the academic offer and the extension services of the University to the real needs of the students. The process of convergence towards the European Higher Education Area (EHEA) raises the need to form in competitions, that is to say, of developing in our students capacities and knowledge beyond the purely theoretical-practical thing. Therefore, the perception and experience of the educational process and environment by the students is an important issue to be addressed to accomplish their expectations and achieve a curriculum accordingly to EHEA expectations. The present study aims to explore the student motivation and approval of the educational environment at the UPM. To this end a total of 97 students enrolled in the undergraduate program of Civil Engineering, Computer Engineering and Agronomic Engineering at UPM were surveyed. The survey consisted of 40 questions divided in three blocks. The first one of 20 questions of personal character in that they were gathering, besides the sex and the age, the degree of fulfilment, implication and dedication with the institution and the academic tasks. In the second block we identify 10 questions related to the perception of the student on the teaching quality, and finally a block of 10 questions regarding the Bologna Process. The students personal motivation was moderately high, with a score of 3.6 (all scores are provided on a 5-point scale), being the most valuable items obtaining a university degree (4,3) and the friendship between students (4,2). Any significant difference was shown between sexes (P=0.23) since the averages for this block of questions were of 3.7±0.3 and 3.5±0.4 for women and men respectively. The students are moderately satisfied with their graduate studies with an average score of 3,2, being the questions that reflect a minor satisfaction the research profile of the teachers (2,8) and the organization of the Schools (2,9). The best valued questions are related to the usefulness and quality of the degrees, with 3,5 and 3,4 respectively, and to the interest of the courses within the degree (3,4). For sexes, the results of this block of questions are similar (3.1±0.3 and 3.2±0.3 for men and women respectively=0.79). Also, there were no differences (P=0.39) between the students who arrange work and studies or do not work (3.1±0.2 and 3.2±0.3 respectively). In conclusion, students at UPM present an acceptable degree of motivation and satisfaction with regard to the studies and services that offer their respective Schools. Both characteristics receive the same value both for men and for women and so much for students who arrange work and studies as for those who devote themselves only to studying. In a significant way, students who are more engaged and are in-class attendants present the major degree of satisfaction.Overall, there is a great lack of information regarding the Bologna Process. In fact to the majority, they would like to know more on what it is, what it means and what changes will involve its implementation.

Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment

Both in industry and research, the quality control of micrometric manufactured parts is based on the measurement of parameters whose traceability is sometimes difficult to guarantee. In some of these parts, the confocal microscopy shows great aptitudes to characterize a measurand qualitatively and quantitatively. The confocal microscopy allows the acquisition of 2D and 3D images that are easily manipulated. Nowadays, this equipment is manufactured by many different brands, each of them claiming a resolution probably not in accord to their real performance. The Laser Center (Technical University of Madrid) has a confocal microscope to verify the dimensions of the micro mechanizing in their own research projects. The present study pretends to confirm that the magnitudes obtained are true and reliable. To achieve this, a methodology for confocal microscope calibration is proposed, as well as an experimental phase for dimensionally valuing the equipment by 4 different standard positions, with its seven magnifications and the six objective lenses that the equipment currently has, in the x–y and z axis. From the results the uncertainty will be estimated along with an effect analysis of the different magnifications in each of the objective lenses.

Permanent deformation estimates of dynamic equipment foundations: Application to a gas turbine in granular soils

Permanent displacements of a gas turbine founded on a fine, poorly graded, and medium density sand are studied. The amplitudes and modes of vibration are computed using Barkan´s formulation, and the “High-Cycle Accumulation” (HCA) model is employed to account for accumulated deformations due to the high number of cycles. The methodology is simple: it can be easily incorporated into standard mathematical software, and HCA model parameters can be estimated based on granulometry and index properties. Special attention is devoted to ‘transient’ situations at equipment´s start-up, during which a range of frequencies – including frequencies that could be similar to the natural frequencies of the ground – is traversed. Results show that such transient situations could be more restrictive than stationary situations corresponding to normal operation. Therefore, checking the stationary situation only might not be enough, and studying the influence of transient situations on computed permanent displacements is needed to produce a proper foundation design

Equipment and procedures for ON-SITE testing of PV plants and BIPV

Actual system performance of a PV system can differ from its expected behaviour.. This is the main reason why the performance of PV systems should be monitored, analyzed and, if needed, improved on. Some of the current testing procedures relating to the electrical behaviour of PV systems are appropriated for detecting electrical performance losses, but they are not well-suited to reveal hidden defects in the modules of PV plants and BIPV, which can lead to future losses. This paper reports on the tests and procedures used to evaluate the performance of PV systems, and especially on a novel procedure for quick on-site measurements and defect recognition caused by overheating in PV modules located in operating PV installations.

Loose Coupling Based Reference Scheme for Shop Floor-Control-System/Production-Equipment Integration.

Acoplamiento del sistema informático de control de piso de producción (SFS) con el conjunto de equipos de fabricación (SPE) es una tarea compleja. Tal acoplamiento involucra estándares abiertos y propietarios, tecnologías de información y comunicación, entre otras herramientas y técnicas. Debido a la turbulencia de mercados, ya sea soluciones personalizadas o soluciones basadas en estándares eventualmente requieren un esfuerzo considerable de adaptación. El concepto de acoplamiento débil ha sido identificado en la comunidad de diseño organizacional como soporte para la sobrevivencia de la organización. Su presencia reduce la resistencia de la organización a cambios en el ambiente. En este artículo los resultados obtenidos por la comunidad de diseño organizacional son identificados, traducidos y organizados para apoyar en la solución del problema de integración SFS-SPE. Un modelo clásico de acoplamiento débil, desarrollado por la comunidad de estudios de diseño organizacional, es resumido y trasladado al área de interés. Los aspectos claves son identificados para utilizarse como promotores del acoplamiento débil entre SFS-SPE, y presentados en forma de esquema de referencia. Así mismo, este esquema de referencia es presentado como base para el diseño e implementación de una solución genérica de acoplamiento o marco de trabajo (framework) de acoplamiento, a incluir como etapa de acoplamiento débil entre SFS y SPE. Un ejemplo de validación con varios conjuntos de equipos de fabricación, usando diferentes medios físicos de comunicación, comandos de controlador, lenguajes de programación de equipos y protocolos de comunicación es presentado, mostrando un nivel aceptable de autonomía del SFS. = Coupling shop floor software system (SFS) with the set of production equipment (SPE) becomes a complex task. It involves open and proprietary standards, information and communication technologies among other tools and techniques. Due to market turbulence, either custom solutions or standards based solutions eventually require a considerable effort of adaptation. Loose coupling concept has been identified in the organizational design community as a compensator for organization survival. Its presence reduces organization reaction to environment changes. In this paper the results obtained by the organizational de sign community are identified, translated and organized to support the SFS-SPE integration problem solution. A classical loose coupling model developed by organizational studies community is abstracted and translated to the area of interest. Key aspects are identified to be used as promoters of SFS-SPE loose coupling and presented in a form of a reference scheme. Furthermore, this reference scheme is proposed here as a basis for the design and implementation of a generic coupling solution or coupling framework, that is included as a loose coupling stage between SFS and SPE. A validation example with various sets of manufacturing equipment, using different physical communication media, controller commands, programming languages and wire protocols is presented, showing an acceptable level of autonomy gained by the SFS.

Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.