Environmental assessment of low speed policies for motor vehicle mobility in city centres

streets in local residential areas in large cities, real traffic tests for pollutant emissions and fuel consumption have been carried out in Madrid city centre. Emission concentration and car activity were simultaneously measured by a Portable Emissions Measurement System. Real life tests carried out at different times and on different days were performed with a turbo-diesel engine light vehicle equipped with an oxidizer catalyst and using different driving styles with a previously trained driver. The results show that by reducing the speed limit from 50 km h-1 to 30 km h-1, using a normal driving style, the time taken for a given trip does not increase, but fuel consumption and NOx, CO and PM emissions are clearly reduced. Therefore, the main conclusion of this work is that reducing the speed limit in some narrow streets in residential and commercial areas or in a city not only increases pedestrian safety, but also contributes to reducing the environmental impact of motor vehicles and reducing fuel consumption. In addition, there is also a reduction in the greenhouse gas emissions resulting from the combustion of the fuel.

Consequences of different meteorological scenarios in the environmental impact assessment of tritium in air

The environmental impact of systems managing large (kg) tritium amount represents a public scrutiny issue for the next coming fusion facilities as ITER and DEMO. Furthermore, potentially new dose limits imposed by international regulations (ICRP) shall impact next coming devices designs and the overall costs of fusion technology deployment. Refined environmental tritium dose impact assessment schemes are then overwhelming. Detailed assessments can be procured from the knowledge of the real boundary conditions of the primary tritium discharge phase into atmosphere (low levels) and into soils. Lagrangian dispersion models using real-time meteorological and topographic data provide a strong refinement. Advance simulation tools are being developed in this sense. The tool integrates a numerical model output records from European Centre for Medium range Weather Forecast (ECMWF) with a lagrangian atmospheric dispersion model (FLEXPART). The composite model ECMWF/FLEXTRA results can be coupled with tritium dose secondary phase pathway assessment tools. Nominal tritium discharge operational reference and selected incidental ITER-like plant systems tritium form source terms have been assumed. The realtime daily data and mesh-refined records together with lagrangian dispersion model approach provide accurate results for doses to population by inhalation or ingestion in the secondary phase

Methodology proposal for the life cycle sustainability assessment applied to retrofitting in a local context

In the European context of upgrading the housing stock energy performance, multiple barriers hinder the wide uptake of sustainable retrofitting practices. Moreover, some of these may imply negative effects often disregarded. Policy makers need to identify how to increase and improve retrofitting practices from the comprehensive point of view of sustainability. None of the existing assessment tools addresses all the issues relevant for sustainable development in a local situation from a life cycle perspective. Life cycle sustainability assessment methodology, or LCSA, analyzes environmental and socioeconomic impacts. The environmental part is quite developed, but the socioeconomic aspect is still challenging. This work proposes socioeconomic criteria to be included in a LCSA to assess retrofitting works in the specific context of Brussels-Capital Region. LCSA feasibility and challenging methodology aspects are discussed.

Impacts and adaptive capacity as drivers for prioritizing agricultural adaptation to climate change in Europe

In the face of likely climate change impacts policy makers at different spatial scales need access to assessment tools that enable informed policy instruments to be designed. Recent scientific advances have facilitated the development of improved climate projections, but it remains to be seen whether these are translated into effective adaptation strategies. This paper uses existing databases on climate impacts on European agriculture and combines them with an assessment of adaptive capacity to develop an interdisciplinary approach for prioritising policies. It proposes a method for identifying relevant policies for different EU countries that are representative of various agroclimatic zones. Our analysis presents a framework for integrating current knowledge of future climate impacts with an understanding of the underlying socio-economic, agricultural and environmental traits that determine a region’s capacity for adapting to climate change.

Análisis y propuesta de metodologías para la normalización de los informes de evaluación ambiental que permita la gestión, documentación y participación social

El desarrollo de la Ingeniería Civil en el siglo XXI debe estar dirigido a proporcionar de forma simultánea tanto las necesidades funcionales del proyecto como la conservación y sostenibilidad del territorio. Para que este proceso se pueda realizar de forma eficiente debe integrarse a los promotores (públicos y privados), a la administración y a los ciudadanos y sus asociaciones en el mecanismo de gestión y documentación del proyecto. Las directrices de la Unión Europea y el nuevo marco legislativo actual (Ley 21/2013) está orientado en esta dirección, pero las herramientas que estamos utilizando en este momento no cumplen adecuadamente estas necesidades. La norma UNE 157921:2006 y sucesivas debería renovarse contemplando tanto el nuevo marco legislativo como sobre todo la nueva realidad tecnológica para la gestión de la documentación técnica y científica mediante los lenguajes extensibles, la integración de bases de datos, las herramientas de participación social y las herramientas de protección y conservación del territorio todo ello a lo largo del ciclo de vida del proyecto En esta tesis vamos a presentar los trabajos que estamos realizando de análisis y propuesta de metodologías para la normalización de los informes de evaluación ambiental. que permita la gestión, documentación y participación social ABSTRACT The development of Civil Engineering in the XXI century should be leading towards a simultaneous sustenance of both the functional needs of the project, and the conservation and sustainability of the territory. Public and private promoters should collaborate with administration, citizens and their associations in the management mechanism and project documentation, in order to perform this process efficiently. The guidelines of the European Union and the current legislative framework (Law 21/2013) are oriented towards this, but the tools which are being used at the moment do not adequately meet the mentioned needs. The UNE 157921: 2006 and successive should be renewed in order to contemplate both the new legislative framework and the new technological reality for the management of technical and scientific documentation by the extensible languages, integration of databases, tools of social participation and tools protection and conservation of land all along the project life cycle. The analysis and proposal of different methodologies for the standardisation of environmental assessment reports, which admits for the correct management, documentation and social participation, will be presented in this paper.

La geoquímica de los sedimentos de llanuras de inundación como guía para la valoración ambiental en España

En la presente tesis se estudian los contenidos geoquímicos de los sedimentos de llanura de inundación en diversas cuencas fluviales seleccionadas con el objetivo de contribuir a un mejor conocimiento de sus condiciones medioambientales. En cada cuenca, se ha muestreado un perfil vertical de llanura de inundación, dividiéndolo en tramos que generalmente corresponden a diferentes episodios de inundación. Estos sedimentos se depositan durante los episodios de crecidas una vez que la corriente sobrepasa los límites del canal. Se caracterizan normalmente por tener un tamaño de grano fino y una estructura en capas horizontales que corresponden a los sucesivos episodios de inundación. Muestran dos ventajas principales con respecto a otros medios de muestreo en geoquímica como suelos o sedimentos de corriente: • Pueden almacenar sedimento antiguo así como actual, con lo que se puede estudiar la historia geoquímica de una zona específica en un mismo punto de muestreo (perfil vertical). • Los sedimentos de llanuras de inundación son capaces de caracterizar grandes áreas de drenaje. El origen de los sedimentos es más diverso que en el sedimento de corriente, debido a las mayores áreas de donde proceden las aguas de las avenidas. Las cuencas han sido seleccionadas según las actividades antropogénicas que en ellas se llevan a cabo, en concreto, actividades urbanas e industriales, minería y agricultura. Así mismo, se han estudiado, como referencia, dos cuencas donde no se espera encontrar ningún tipo de actividad contaminante. Una vez hecha la selección, los sedimentos aluviales de las cuencas se han estudiado cuidadosamente para asegurar que no existen depósitos de acreción lateral en el punto seleccionado. Posteriormente se ha procedido al muestreo del perfil vertical. Las muestras han sido analizadas mediante ICP-MS (ataque total) e INAA para conocer los contenidos totales de los elementos traza y mayoritarios. Los análisis de la fracción extraíble se han llevado a cabo mediante ICP-MS (ataque con agua regia). Así mismo, algunas muestras seleccionadas han sido sometidas a una extracción secuencial para un estudio más detallado. La presencia de materia orgánica ha sido estimada mediante el análisis de Carbono Orgánico Total (TOC). Finalmente, se ha llevado a cabo un análisis de isótopos de Pb en muestras escogidas en los perfiles, con el objetivo de hacer una evaluación ambiental. Los contenidos metálicos aumentan hacia la superficie en algunos de los perfiles, mientras en otros muestran una distribución muy constante exceptuando algún nivel específico con un aumento de los contenidos de la mayoría de los metales. Ha sido posible determinar la influencia de las actividades antropogénicas en algunos de los perfiles. Aquellos que pertenecen a cuencas mineras, urbanas o industrializadas muestran generalmente altos contenidos en elementos metálicos. Es el caso de los perfiles muestreados en los ríos Odiel y Tinto, Besaya, Besós y Manzanares. Algunos de estos perfiles pueden incluso correlacionarse con periodos de tiempo en los que ha tenido lugar una actividad antropogénica más intensa. Los perfiles que mejor se correlacionan con la actividad antropogénica de la cuenca son el perfil de Rivas en el río Manzanares (Madrid), que refleja un crecimiento de la contaminación producida por las actividades urbana e industrial en las últimas décadas, y el río Tinto, que muestra un crecimiento llamativo de los contenidos en su mayoría metálicos que puede estar relacionado con el incremento de la actividad minera que tuvo lugar hace aproximadamente 125 años. El análisis de los isótopos de Pb ha resultado ser una herramienta útil en la evaluación ambiental de estos sedimentos. Con este estudio y mediante la comparación con fuentes naturales y antropogénicas, ha sido posible diferenciar las muestras afectadas por diferentes fuentes de plomo, así como detectar las más afectadas antropogénicamente. ABSTRACT The geochemical composition of overbank sediments of some selected river basins is studied in this thesis in order to contribute to a better knowledge of the environmental conditions surrounding them. In each basin a vertical overbank profile has been sampled, dividing it into stretches that usually correspond to different flood events. The overbank sediments are those deposited during a flood event once the flow spills over the channel banks. They are usually characterized by a very fine grain size and a structure of horizontal layers, which correspond to successive flood events. These sediments show two main advantages regarding other sampling media in geochemistry, like soils or stream sediments: • They can store sediment deposited in the past as well as in current times, so that the history of a specific location can be studied at the very same point (vertical profile). • The overbank sediments are able to characterize a large drainage area. The origin of the sediment is wider than in the stream sediments due to the larger areas where the flood water comes from. The basins have been selected depending on the anthropogenic activities developed in them, namely, urban and industrial activities, mining activities and agricultural activities. As well, two pristine basins have been studied as a reference. Afterwards, the alluvial sediments in the basins have been carefully studied in order to sample a vertical profile and make sure that lateral accretion materials are not present in the profile. The samples have been analysed by ICP-MS (total digestion) and INAA to know the total contents of trace and major elements. Analysis of the mobile fraction has been carried out by ICP-MS (aqua regia); as well some of the samples have been subjected to sequential extraction for a more detailed study. The presence of organic matter has been estimated by the analysis of the Total Organic Carbon (TOC). Finally, a lead isotope analysis of some of the samples in the profiles was carried out in order to make an environmental assessment. Metal contents grow towards the surface in some of the profiles, while others show a very steady distribution, except for some of them with a growth of most of the metals in a specific level. XI It has been possible to determine the influence of the anthropogenic activities in some of the profiles. The ones that belong to mining and urban or industrialized basins show generally high contents of metal elements. This is the case of the profiles sampled in the Odiel and Tinto Rivers, the Besaya River, the Besós River and the Manzanares River. Some of these profiles can even correlate with the periods of time when a more intense activity in their respective basins has taken place. The profiles which best correlate with the anthropogenic activity are the Rivas profile in the Manzanares River, which reflects a growth of the pollution produced by urban and industrial activities in the city of Madrid in the last decades and the Tinto profile, which shows a very dramatic growth of the elemental contents (mostly metals) which can be related to the increase of the mining activities that took place in the last 125 years. The analysis of lead isotopes has turned out to be a powerful tool in the environmental assessment in this type of sediments. With this study and through the comparison with natural and anthropogenic sources, it has been possible to determine samples affected by different sources of lead and to detect the most anthropogenicaly affected ones.

Methodological Proposal for Teamwork Evaluation in the field of training Project Management.

Teamwork, is one of the abilities that today is highly valued in the professional arena with a great importance for various personal and interpersonal skills associated with it. In this context, the Technical University of Madrid, is developing a coordinated educational innovation project, which main objective is to develop methodological and assessment tools for the acquisition of personal skills necessary to improve the employability of graduates and their skills for project management. Within this context, this paper proposes a methodology composed of various activities and indicators, as well as specific assessment instruments linked to the teamwork competence. Through a series of systematic steps it was allowed the design of an instrument and construction of a scale for measuring the competence of teamwork. The practical application of the methodology has been carried out in Projects lectures from different Schools of Engineering at the Technical University of Madrid, which results are presented in this document as a pilot experience. Results show the various aspects and methods that teachers should consider in evaluating the competence of the work, including analysis of the quality of results, through reliability and construct validity. On the other hand, show the advantages of applying this methodology in the field of project management teaching.

Mapping the visual landscape quality in Europe using physical attributes

he inclusion of environmental care data in the decision-making process should be based on the results obtained after scienti?cally evaluating different environmental variables. Herein, a European landscape geographic model is presented. This landscape map would allow the environmental care variable ?visual landscape?, along with other information related to vegetation, geology, soils, cultural variables, etc., to be integrated into the planning process. The methodology used is not new since it has already been tested in Spain by the authors. Nevertheless, the model was adapted to cope with the much more extensive territory of the European Union. This meant dealing with computational dif?culties, and a lack of information. The result of this work is a raster map (100 m cell size) that evaluates landscape quality in Europe by dividing the area into seven visual quality classes. This is a practical tool for territorial development that will facilitate the environmental assessment of plans, such as infrastructure plans, within a strategic pan-European framework.

Nanotechnology for high frequency communications: nitrides and graphene

The achievement of higher frequencies (HF) and the reduction of energy consumption, to improve sensing, communication and computation, involve the continued scaling down to the nanometer level. This scaling is enabled by of innovative device designs, improved processing technologies and assessment tools, and new material structures. In this work, we have used all these factors to demonstrate state-of-the-art HF devices in two materials with quite different electronic properties: wide semiconductor bandgap III-nitrides for resonators and power amplifiers; and graphene, a zero bandgap material expected to revolutionize low noise and HF flexible electronics. Some issues faced during their development will be discussed during the talk.

Systems and technologies for objective evaluation of technical skills in laparoscopic surgery

Minimally invasive surgery is a highly demanding surgical approach regarding technical requirements for the surgeon, who must be trained in order to perform a safe surgical intervention. Traditional surgical education in minimally invasive surgery is commonly based on subjective criteria to quantify and evaluate surgical abilities, which could be potentially unsafe for the patient. Authors, surgeons and associations are increasingly demanding the development of more objective assessment tools that can accredit surgeons as technically competent. This paper describes the state of the art in objective assessment methods of surgical skills. It gives an overview on assessment systems based on structured checklists and rating scales, surgical simulators, and instrument motion analysis. As a future work, an objective and automatic assessment method of surgical skills should be standardized as a means towards proficiency-based curricula for training in laparoscopic surgery and its certification.

A novel motion tracking system for evaluation of functional rehabilitation of the upper limbs

Upper limb function impairment is one of the most common sequelae of central nervous system injury, especially in stroke patients and when spinal cord injury produces tetraplegia. Conventional assessment methods cannot provide objective evaluation of patient performance and the tiveness of therapies. The most common assessment tools are based on rating scales, which are inefficient when measuring small changes and can yield subjective bias. In this study, we designed an inertial sensor-based monitoring system composed of five sensors to measure and analyze the complex movements of the upper limbs, which are common in activities of daily living. We developed a kinematic model with nine degrees of freedom to analyze upper limb and head movements in three dimensions. This system was then validated using a commercial optoelectronic system. These findings suggest that an inertial sensor-based motion tracking system can be used in patients who have upper limb impairment through data integration with a virtual reality-based neuroretation system.

Introducción de criterios de sostenibilidad en la elección de emplazamientos industriales mediante modelos multicriterio

(SPA) La elección de localizaciones para la implantación de actividades industriales es un problema complejo, donde a los criterios de coste y eficiencia se han ido añadiendo otros nuevos relativos tanto al impacto en el medio ambiente como a la imagen de la empresa reflejada en la Responsabilidad Social Empresarial. Los criterios medioambientales han ido adquiriendo gran relevancia en la decisión final, hasta convertirse, gracias a la obligación de someter los proyectos a evaluación ambiental, en elementos clave en la decisión final. Por ello, resulta relativamente frecuente que los promotores consulten previamente con la Administración sobre la viabilidad de sus proyectos antes de iniciar un dilatado procedimiento administrativo. En este trabajo se plantea la utilización de indicadores de sostenibilidad y su aplicación, a través de un modelo de decisiones multicriterio, para la ordenación de las distintas opciones de ubicación inicialmente consideradas, de tal forma que se conviertan en instrumento de tanteo y ayuda en la toma de estas decisiones. Para mostrar su utilidad se propone la utilización de la herramienta de apoyo basada en la metodología PROMETHEE y su aplicación en la ordenación de cinco emplazamientos alternativos para la instalación de una cementera en la Comunidad de Madrid según criterios de sostenibilidad. (ENG) The choice of locations for the implementation of industrial activities is a complex problem where the cost and efficiency criteria have been adding new ones relating to the environment impact and the company’s corporate image reflected in Corporate Social Responsability. The environmental criteria have been getting big importance in the final decision, to become key elements in the final decision, due to the duty of submit of environmental assessment projects. Therefore, promoters, quite often, ask previously to the Administration about the viability of their projects before starting a lengthy administrative procedure. This paper proposes the use of sustainability indicators and their application through a multi-criteria decision model for managing the establishment options initially considered, so that they become an help instrument of estimation in order to making these decisions. To show its usefulness we propose the use of the support tool for decision making based on the PROMETHEE methodology and its application in the management of 5 alternative sites for the installation of a cement factory in the Community of Madrid under sustainability criteria.

Social Indicators in the Sustainable Refurbishment: Calculating Quality of Life Indicator in a Residential Building in Málaga

How can we measure ‘quality of life’? The sustainable refurbishment goes beyond strictly energy aspects. Sustainability indicators are needed to facilitate data collection and to provide information which does not require too time-consuming calculations. Thus, you can offer an idea of the extent and quality of the rehabilitation before starting the project and, also, the obtained results can be evaluated in an agile way after the refurbishment. From a list of social indicators gathered from different methods, sustainability assessment tools and International and European standards, three social indicators are proposed: Users Satisfaction, Participation Agreement and Quality of Life. This paper shows the development of Quality of Life social indicator, the more closely related to the main objectives of Researchand Development Project “Sustainable Refurbishment”: improving energy efficiency and wellbeing of users in existing residential buildings. Finally, this social indicator is applied to a real case study in Málaga (Spain).

Definición e implementación de métricas objetivas para la evaluación funcional del miembro superior: aplicación a población con lesión medular cervical

En personas que padecen una Lesión Medular cervical, la función de los miembros superiores se ve afectada en mayor o menor medida, dependiendo fundamentalmente del nivel de la lesión y de la severidad de la misma. El déficit en la función del miembro superior hace que la autonomía e independencia de las personas se vea reducida en la ejecución de Actividades de la Vida Diaria. En el entorno clínico, la valoración de la función del miembro superior se realiza principalmente con escalas clínicas. Algunas de ellas valoran el nivel de dependencia o independencia en la ejecución de Actividades de la Vida Diaria, como, por ejemplo, el índice de Barthel y la escala FIM (Medida de la Independencia Funcional). Otras escalas, como Jebsen-Taylor Hand Function, miden la función del miembro superior valorando la destreza y la habilidad en la ejecución de determinadas tareas funcionales. Estas escalas son generales, es decir, se pueden aplicar a distintas poblaciones de sujetos y a la presencia de distintas patologías. Sin embargo, existen otras escalas desarrolladas específicamente para valorar una patología concreta, con el objetivo de hacer las evaluaciones funcionales más sensibles a cambios. Un ejemplo es la escala Spinal Cord Independence Measure (SCIM), desarrollada para valorar Lesión Medular. Las escalas clínicas son instrumentos de medida estandarizados, válidos para su uso en el entorno clínico porque se han validado en muestras grandes de pacientes. No obstante, suelen poseer una elevada componente de subjetividad que depende principalmente de la persona que puntúa el test. Otro aspecto a tener en cuenta, es que la sensibilidad de las escalas es alta, fundamentalmente, a cambios groseros en el estado de salud o en la función del miembro superior, de forma que cambios sutiles en el sujeto pueden no ser detectados. Además, en ocasiones, poseen saturaciones en el sistema de puntuación, de forma que mejorías que se puedan producir por encima de un determinado umbral no son detectadas. En definitiva, estas limitaciones hacen que las escalas clínicas no sean suficientes, por sí mismas, para evaluar estrategias motoras del miembro superior durante la ejecución de movimientos funcionales, siendo necesaria la búsqueda de instrumentos de medida que aporten objetividad, complementen las valoraciones y, al mismo tiempo, intenten solventar las limitaciones que poseen las escalas. Los estudios biomecánicos son ejemplos de métodos objetivos, en los que diversas tecnologías se pueden utilizar para recoger información de los sujetos. Una concreción de estos estudios son los estudios cinemáticos. Mediante tecnología optoelectrónica, inercial o electromagnética, estos estudios proporcionan información objetiva acerca del movimiento realizado por los sujetos, durante la ejecución de tareas concretas. Estos sistemas de medida proporcionan grandes cantidades de datos que carecen de una interpretación inmediata. Estos datos necesariamente deben ser tratados y reducidos a un conjunto de variables que, a priori, posean una interpretación más sencilla para ser utilizados en la práctica clínica. Estas han sido las principales motivaciones de esta investigación. El objetivo principal fue proponer un conjunto de índices cinemáticos que, de forma objetiva, valoren la función del miembro superior; y validar los índices propuestos en poblaciones con Lesión Medular, para su uso como instrumentos de valoración en el entorno clínico. Esta tesis se enmarca dentro de un proyecto de investigación: HYPER (Hybrid Neuroprosthetic and Neurorobotic Devices for Functional Compensation and Rehabilitation of Motor Disorders, referencia CSD2009-00067 CONSOLIDER INGENIO 2010). Dentro de este proyecto se lleva a cabo investigación en el desarrollo de modelos, para determinar los requisitos biomecánicos y los patrones de movimiento de los miembros superiores en sujetos sanos y personas con lesión medular. Además, se realiza investigación en la propuesta de nuevos instrumentos de evaluación funcional en el campo de la rehabilitación de los miembros superiores. ABSTRACT In people who have suffered a cervical Spinal Cord Injury, upper limbs function is affected to a greater or lesser extent, depending primarily on the level of the injury and the severity of it. The deficit in the upper limb function reduces the autonomy and independence of persons in the execution of Activities of Daily Living. In the clinical setting, assessment of upper limb function is mainly performed based on clinical scales. Some value the level of dependence or independence in performing activities of daily living, such as the Barthel Index and the FIM scale (Functional Independence Measure). Other scales, such as the Jebsen-Taylor Hand Function, measure upper limb function in terms of the skill and ability to perform specific functional tasks. These scales are general, so can be applied to different populations of subjects and the presence of different pathologies. However, there are other scales developed for a specific injury, in order to make the functional assessments more sensitive to changes. An example is the Spinal Cord Independence Measure (SCIM), developed for people with Spinal Cord Injury. The clinical scales are standardized instruments measure, valid for use in the clinical setting because they have been validated in large patient samples. However, they usually have a high level of subjectivity which mainly depends on the person who scores the test. Another aspect to take into account is the high sensitivity of the scales mainly to gross changes in the health status or upper limb function, so that subtle changes in the subject may not be detected. Moreover, sometimes, have saturations in the scoring system, so that improvements which may occur above a certain threshold are not detected. For these reasons, clinical scales are not enough, by themselves, to assess motor strategies used during movements. So, it’s necessary to find measure instruments that provide objectivity, supplement the assessments and, at the same time, solving the limitations that scales have. Biomechanical studies are examples of objective methods, in which several technologies can be used to collect information from the subjects. One kind of these studies is the kinematic movement analysis. By means of optoelectronics, inertial and electromagnetic technology, these studies provide objective information about the movement performed by the subjects during the execution of specific tasks. These systems provide large quantities of data without easy and intuitive interpretation. These data must necessarily be treated and reduced to a set of variables that, a priori, having a simpler interpretation for their use in the clinical practice. These were the main motivations of this research. The main objective was to propose a set of kinematic indices, or metrics that, objectively, assess the upper limb function and validate the proposed rates in populations with Spinal Cord Injury, for use as assessment tools in the clinical setting. This dissertation is framed within a research project: HYPER (Neurorobotic Devices for Functional Compensation and Rehabilitation of Motor Disorders, grant CSD2009- 00067 CONSOLIDER INGENIO 2010). Within this research project, research is conducted in relation to the biomechanical models development for determining the biomechanical requirements and movement patterns of the upper limb in healthy and people with Spinal Cord Injury. Moreover, research is conducted with respect to the proposed of new functional assessment instruments in the field of upper limb rehabilitation.

Caracterización y análisis comparativo del comportamiento medioambiental de los materiales de aislamiento térmico utilizados en la envolvente del edificio, en función del sistema constructivo y de la situación geográfica

La construcción es uno de los causantes de mayor impacto ambiental y energético en el entorno. Por ello, los profesionales del sector deben empezar a cambiar la manera en la que diseñan la arquitectura, incorporando técnicas y parámetros sostenibles desde las primeras etapas del diseño, controlando la elección de los materiales y las soluciones constructivas. A través de las Declaraciones Ambientales de Producto (DAP) es posible conocer el perfil ambiental de los productos de la construcción, sin embargo, la mayoría de estos documentos solo poseen información de la etapa de producto (A1-A3) y de la etapa de fin de vida, contemplando solo un tipo de tratamiento (vertedero o incineración). Lo que propone esta investigación es generar información medioambiental del resto de las etapas del ciclo de vida relacionado con el producto, haciendo especial hincapié en la etapa de transporte (A4), puesta en obra (A5), transporte de obra a planta de tratamiento (C2) y etapa de fin de vida con vertedero e incineración. Para la realización de la investigación se ha generado un Inventario de Ciclo de Vida (ICV) con valores medios facilitados por las empresas. El ámbito de actuación es la península ibérica, considerándose un transporte en camión. La evaluación ambiental se ha realizado con la herramienta informática SimaPro (versión 7.3.3). Para los procesos que no han podido ser modelizados por falta de información, se ha recurrido a la base de datos Ecoinvent (versión 2.0). Las categorías de impacto analizadas son las contempladas en la UNE-EN ISO 15804+A1. Con esta investigación se propone una catalogación medioambiental del material de aislamiento térmico según los impactos asociados al transporte, puesta en obra y fin de vida del producto para que el prescriptor pueda escoger qué material es el más adecuado a incorporar en el proyecto, desde el punto de vista medioambiental. ABSTRACT _ Construction is one of the main causes of environmental and energy impacts in the environment. Therefore, the professionals of the sector should begin changing the way they design architecture, incorporating sustainable techniques and parameters from the first design stages, controlling the choice of materials and building solutions. It is possible to know the environmental profile of construction products through Environmental Product Declarations (EPD). However, most of these documents only provide information for the product stage (A1-A3) and the end-of-life stage, taking into account only one type of treatment (landfill or incineration). This research proposes the generation of environmental information for the rest of the life cycle stages related to the product, with particular emphasis on the transportstage (A4), construction installation (A5), transport from the construction site to the recycling facilities (C2) and end-of-life stage with landfill and incineration. A Life Cycle Inventory (LCI) has been generated for the development of the research, with mean values provided by the firms. The scope of action is the Iberian Peninsula, considering transport by lorry. The environmental assessment has been carried out with the SimaPro software (version 7.3.3). The Ecoinvent database (version 2.0) has been used for the processes that couldn’t be modelled due to lack of information. The impact categories analysed are those considered in standard UNE-EN ISO 15804+A1. This research proposes an environmental cataloguing of the thermal insulation material depending on the impacts associated with transport, construction installation and end-of-life of the product so that the prescriber might choose which material is the most suitable to implement in the project from an environmental point of view.