Effect of sugar beet pulp fibre fractions on growth performance, fecal digestibility and digestive physiology in rabbits around weaning

The present study investigated the effect of the different fibre components of sugar beet pulp (SBP) on growth performance and some digestive traits. Four semi-synthetic diets were formulated with similar NDF (33% DM) and protein (16% DM) level. Control diet was formulated to contain the lowest level of soluble fibre (3% DM) and SBP diet the highest (9%). The soluble (pectins) and insoluble fractions of SBP were studied in other two diets (Pectin and InsSBP diets). A total of 136 weanling rabbits (25 d of age) was housed individually, randomly assigned to 4 experimental groups, and fed ad libitum with the experimental diets during 10 days after weaning. The type of diet did not affect growth rate and stomach pH. Animals fed with SBP diet showed higher DM and NDF digestibility (4 and 83%, respectively), gain:feed ratio (13%), cecal and total tract weight (13 and 9%) and ileal viscosity (148%) than rabbits fed the Control diet, but lower cecal pH (9%). Pectin diet increased ileal viscosity and decreased the weight of stomach content with respect to SBP diet. Rabbits fed InsSBP diet showed similar results to SBP diet but lower ileal viscosity and cecal pH than those fed Pectin diet. In conclusion, SBP and their soluble and insoluble fractions are well digested in young rabbits. However the soluble and insoluble fibre of SBP produce different effects in the gastrointestinal tract.

Lenticular arrays based on liquid crystals

Lenticular array products have experienced a growing interest in the last decade due to the very wide range of applications they can cover. Indeed, this kind of lenses can create different effects on a viewing image such as 3D, flips, zoom, etc. In this sense, lenticular based on liquid crystals (LC) technology is being developed with the aim of tuning the lens profiles simply by controlling the birefringence electrically. In this work, a LC lenticular lens array has been proposed to mimic a GRIN lenticular lens array but adding the capability of tuning their lens profiles. Comb control electrodes have been designed as pattern masks for the ITO on the upper substrate. Suitable high resistivity layers have been chosen to be deposited on the control electrode generating an electric field gradient between teeth of the same electrode. Test measurements have allowed us to demonstrate that values of phase retardations and focal lengths, for an optimal driving waveform, are fairly in agreement. In addition, results of focusing power of tuneable lenses were compared to those of conventional lenses. The behaviour of both kinds of lenses has revealed to be mutually similar for focusing collimated light and for refracting images.

The interurban DRAG-Spain model: the main factors of influence on road accidents in Spain

This paper presents the results of applying DRAG methodology to the identification of the main factors of influence on the number of injury and fatal accidents occurring on Spain’s interurban network. Nineteen independent variables have been included in the model grouped together under ten categories: exposure, infrastructure, weather, drivers, economic variables, vehicle stock, surveillance, speed and legislative measures. Highly interesting conclusions can be reached from the results on the basis of the different effects of a single variable on each of the accident types according to severity. The greatest influence revealed by the results is exposure, which together with inexperienced drivers, speed and an ageing vehicle stock, have a negative effect, while the increased surveillance on roads, the improvement in the technological features of vehicles and the proportion of high capacity networks have a positive effect, since the results obtained show a significant drop in accidents.

Influence of temperature and moisture content in Non-destructive values of Scots pine (Pinus sylvestris L.)

Good results evaluating material properties using non-destructive testing (NDT) techniques have been achieved for decades. Several studies to understand the influence of temperature and moisture content on NDT have concluded different effects. In this study, NDT parameters were measured on the principal structural Spanish sawn timber species, Scots pine (Pinus sylvestris L.). NDT were conducted on 216 specimens of nominal dimensions 20 by 20 by 400 mm. Specimens were divided into several groups and studied at six different temperatures and four different moisture contents. Commercial equipment and techniques applied were Sylvatest Duo (ultrasonic wave technique), Steinkamp BPV (ultrasonic wave technique), and Grindo Sonic Mk5 "Industrial" (vibration analysis technique). Differences in NDT values within specimens at different temperatures and moisture contents were obtained. Main results of this study and relationships that describe changes in NDT values by effect of temperature and moisture content are presented.

The influence of diet on the effectiveness of garlic oil and cinnamaldehyde to manipulate in vitro ruminal fermentation and methane production.

The objective of this study was to evaluate the effects of increasing doses [0 (control: CON), 20, 60, 180 and 540 mg/L incubation medium] of garlic oil (GO) and cinnamaldehyde (CIN) on in vitro ruminal fermentation of two diets. Batch cultures of mixed ruminal microorganisms were inoculated with ruminal fluid from four sheep fed a medium-concentrate diet (MC; 50 : 50 alfalfa hay : concentrate) or four sheep fed a high-concentrate diet (HC; 15 : 85 barley straw : concentrate). Diets MC and HC were representative of those fed to dairy and fattening ruminants, respectively. Samples of each diet were used as incubation substrates for the corresponding inoculum, and the incubation was repeated on 4 different days (four replicates per experimental treatment). There were GO × diet-type and CIN × diet-type interactions (P < 0.001–0.05) for many of the parameters determined, indicating different effects of both oils depending on the diet type. In general, effects of GO were more pronounced for MC compared with HC diet. Supplementation of GO did not affect (P > 0.05) total volatile fatty acid (VFA) production at any dose. For MC diet, GO at 60, 180 and 540 mg/L decreased (P < 0.05) molar proportion of acetate (608, 569 and 547 mmol/mol total VFA, respectively), and increased (P < 0.05) propionate proportion (233, 256 and 268 mmol/mol total VFA, respectively), compared with CON values (629 and 215 mmol/mol total VFA for acetate and propionate, respectively). A minimum dose of 180 mg of GO/L was required to produce similar modifications in acetate and propionate proportions with HC diet, but no effects (P > 0.05) on butyrate proportion were detected. Methane/VFA ratio was reduced (P < 0.05) by GO at 60, 180 and 540 mg/L for MC diet (0.23, 0.16 and 0.10 mol/mol, respectively), and by GO at 20, 60, 180 and 540 mg/L for HC diet (0.19, 0.19, 0.16 and 0.08 mol/mol, respectively), compared with CON (0.26 and 0.21 mol/mol for MC and HC diets, respectively). No effects (P = 0.16–0.85) of GO on final pH and concentrations of NH3-N and lactate were detected. For both diet types, the highest CIN dose decreased (P < 0.05) production of total VFA, gas and methane, which would indicate an inhibition of fermentation. Compared with CON, CIN at 180 mg/L increased (P < 0.05) acetate proportion for the MC (629 and 644 mmol/mol total VFA for CON and CIN, respectively) and HC (525 and 540 mmol/mol total VFA, respectively) diets, without affecting the proportions of any other VFA or total VFA production. Whereas for MC diet CIN at 60 and 180 mg/L decreased (P < 0.05) NH3-N concentrations compared with CON, only a trend (P < 0.10) was observed for CIN at 180 mg/L with the HC diet. Supplementation of CIN up to 180 mg/L did not affect (P = 0.18–0.99) lactate concentrations and production of gas and methane for any diet. The results show that effectiveness of GO and CIN to modify ruminal fermentation may depend on diet type, which would have practical implications if they are confirmed in vivo.

Túneles en macizos calcáreos karstificados: impacto en las obras subterráneas de los fenómenos kársticos, su evaluación y tratamiento

En esta Tesis Doctoral se aborda un tema poco estudiado en el ámbito de los túneles y cuya problemática está basada en los riesgos e incertidumbres que representa el diseño y ejecución de túneles en macizos calizos karstificados. Mediante un estudio profundo del comportamiento de distintos casos reales de túneles en macizos kársticos calizos, aportando la realización de modelos y la experiencia constructiva del autor, se pretende proponer un procedimiento que permita sistematizar las actuaciones, investigación, evaluación y tratamiento en los túneles en karst, como herramienta básica para la toma de decisiones primarias correctas. Además, se proponen herramientas que pueden ayudar a mejorar el diseño y a decidir las medidas más eficientes para afrontar los problemas que genera el karst en los túneles, minimizando los riesgos para todos los actores, su probabilidad e impacto. Se profundiza en tres fases principales (que son referidas en la tesis en cuatro Partes): La INVESTIGACIÓN del macizo rocoso: La investigación engloba todas las actuaciones observacionales encaminadas a obtener el IK (Índice de Karstificación), así como las investigaciones necesarias mediante recopilación de datos superficiales, hidrogeológicos, climáticos, topográficos, así como los datos de investigaciones geofísicas, fotointerpretación, sondeos y ensayos geotécnicos que sean posibles. Mediante la misma, se debe alcanzar un conocimiento suficiente para llevar a cabo la determinación de la Caracterización geomecánica básica del macizo rocoso a distintas profundidades, la determinación del Modelo o modo de karstificación del macizo rocoso respecto al túnel y la Zonificación del índice de karstificación en el ámbito de actuación en el que se implantará el túnel. En esta primera fase es necesaria la correcta Definición geométrica y trazado de la obra subterránea: En función de las necesidades que plantee el proyecto y de los condicionantes externos de la infraestructura, se deben establecer los requisitos mínimos de gálibo necesarios, así como las condiciones de máximas pendientes para el trazado en alzado y los radios mínimos de las curvas en planta, en función del procedimiento constructivo y motivación de construcción del túnel (ferrocarril, carretera o hidráulico, etc...). Estas son decisiones estratégicas o primerias para las que se ha de contar con un criterio y datos adecuados. En esta fase, son importantes las decisiones en cuanto a las monteras o profundidades relativas a la karstificación dominante e investigación de las tensiones naturales del macizo, tectónica, así como las dimensiones del túnel en función de las cavidades previstas, tratamientos, proceso de excavación y explotación. En esta decisión se debe definir, conocida ya de forma parcial la geotecnia básica, el procedimiento de excavación en función de las longitudes del túnel y la clasificación geomecánica del terreno, así como sus monteras mínimas, accesos y condicionantes medioambientales, pero también en función de la hidrogeología. Se establecerá la afección esperable en el túnel, identificando en la sectorización del túnel, la afección esperable de forma general para las secciones pésimas del túnel. Con todos estos datos, en esta primera aproximación, es posible realizar el inventario de casos posibles a lo largo del trazado, para poder, posteriormente, minimizar el número de casos con mayores riesgos (técnicos, temporales o económicos) que requieran de tratamiento. Para la fase de EVALUACIÓN de la matriz de casos posibles en función del trazado inicial escogido (que puede estar ya impuesto por el proyecto, si no se ha podido intervenir en dicha fase), es necesario valorar el comportamiento teórico del túnel en toda su longitud, estudiando las secciones concretas según el tipo y el modo de afección (CASOS) y todo ello en función de los resultados de los estudios realizados en otros túneles. Se debe evaluar el riesgo para cada uno de los casos en función de las longitudes de túnel que se esperan que sean afectadas y el proceso constructivo y de excavación que se vaya a adoptar, a veces varios. Es importante tener en cuenta la existencia o no de agua o relleno arcilloso o incluso heterogéneo en las cavidades, ya que los riesgos se multiplican, así mismo se tendrá en cuenta la estabilidad del frente y del perímetro del túnel. En esta segunda fase se concluirá una nueva matriz con los resultados de los riesgos para cada uno de los casos que se presentarán en el túnel estudiado. El TRATAMIENTO, que se debe proponer al mismo tiempo que una serie de actuaciones para cada uno de los casos (combinación de tipos y modos de afección), debiendo evaluar la eficacia y eficiencia, es decir la relevancia técnica y económica, y como se pueden optimizar los tratamientos. Si la tabla de riesgos que se debe generar de nuevo introduciendo los factores técnicos y económicos no resulta aceptable, será necesaria la reconsideración de los parámetros determinados en fases anteriores. Todo el desarrollo de estas tres etapas se ha recogido en 4 partes, en la primera parte se establece un método de estudio e interpretativo de las investigaciones superficiales y geotécnicas, denominado índice de karstificación. En la segunda parte, se estudia la afección a las obras subterráneas, modelos y tipos de afección, desde un punto de vista teórico. La tercera parte trata de una recopilación de casos reales y las consecuencias extraídas de ellos. Y finalmente, la cuarta parte establece los tratamientos y actuaciones para el diseño y ejecución de túneles en macizos kársticos calizos. Las novedades más importantes que presenta este trabajo son: El estudio de los casos de túneles realizados en karst calizo. Propuesta de los tratamientos más efectivos en casos generales. La evaluación de riesgos en función de las tipologías de túnel y afecciones en casos generales. La propuesta de investigación superficial mediante el índice de karstificación observacional. La evaluación mediante modelos del comportamiento teórico de los túneles en karst para casos muy generales de la influencia de la forma, profundidad y desarrollo de la karstificación. In this doctoral thesis is studied the recommended investigation, evaluation and treatment when a tunnel is planed and constructed in karstic calcareous rock masses. Calcareous rock masses were selected only because the slow disolution produces stable conduct and caves instead the problems of sudden disolutions. Karstification index (IK) that encompasses various aspects of research karstic rock mass is presented. The karst rock masses are all unique and there are no similarities between them in size or density cavities ducts, but both their formation mechanisms, like, geological and hydrogeological geomorphological evidence allow us, through a geomechanical survey and geological-photo interpretation in the surface, establish a karst evaluation index specific for tunnelling, which allows us to set a ranking of the intensity of karstification and the associated stadistic to find caves and its risk in tunnelling. This index is estimated and useful for decision-making and evaluation of measures to be considered in the design of a tunnel and is set in degrees from 0 to 100, with similar to the RMR degrees. The sectorization of the tunnel section and the types of condition proposed in this thesis, are estimated also useful to understand the different effects that interception of ducts and cavities may have in the tunnel during construction and service life. Simplified calculations using two-dimensional models contained in the thesis, have been done to establish the relationship between the position of the cavities relative to the section of the tunnel and its size in relation to the safety factors for each ground conditions, cover and natural stresses. Study of over 100 cases of tunnels that have intercepted cavities or karst conduits have been used in this thesis and the list of risks found in these tunnels have been related as well. The most common and effective treatments are listed and finally associated to the models and type of affection generated to give the proper tool to help in the critical decision when the tunnels intercept cavities. Some existing studies from Marinos have been considered for this document. The structure of the thesis is mainly divided 4 parts included in 3 steps: The investigation, the evaluation and the treatments, which match with the main steps needed for the critical decisions to be made during the design and construction of tunnels in karstic rockmasses, very important to get a successfully project done.

Síntesis de series temporales de atenuación por lluvia en radioenlaces horizontales

En la actualidad, el uso de los sistemas de telecomunicaciones está aumentado a una gran velocidad. Debido a este aumento se hace imprescindible tener que crear sistemas de telecomunicaciones que trabajen en altas frecuencias. Al trabajar en estas frecuencias aparecen fenómenos atmosféricos que hacen que la señal se vea afectada, como la atenuación por lluvia o la atenuación por gases. Estos efectos podrían incluso hacer inviable la comunicación. Este Proyecto Fin de Grado tiene como objetivo la síntesis de series temporales de atenuación por lluvia en trayecto horizontal que afecta a un radioenlace de 38 GHz situado en Madrid. Para la realización del proyecto se utiliza como punto de partida los efectos de atenuación por lluvia en radioenlace horizontal descritos en la Recomendación UIT-R P.530-15. Los resultados obtenidos permiten examinar la validez del método propuesto en la Recomendación UIT-R P.1853-1 referente a la síntesis de las series temporales de atenuación troposférica. Este método propone un sintetizador para combinar los distintos efectos provocados por atenuación troposférica, que será utilizado para la realización del estudio. Este sintetizador ha sido implementado usado el programa Matlab. La primera parte del Proyecto expone los fundamentos teóricos sobre los que sustenta el presente trabajo. Comienza con la descripción de radioenlace, explicando sus distintos tipos y características. Después se muestran los distintos efectos de la propagación que afectan a un radioenlace. Por último, se presentan los fundamentos teóricos de series temporales, así como su implementación en un enlace de comunicaciones. En la segunda parte del Proyecto se explica el análisis de datos que se ha llevado a cabo. Primero se hace un análisis de la intensidad de lluvia según la Recomendación UIT-R P.837-6. Posteriormente se presentan los resultados de atenuación por lluvia obtenidos, haciendo una comparativa entre el modelo de la Recomendación UIT-R P.530-15, el modelo de la Recomendación UIT-R P.1853-1 y gráficas obtenidas a partir de datos experimentales. Como final del Proyecto se exponen las conclusiones que se han extraído durante su realización, así como posibles líneas futuras de investigación que continúen con el estudio realizado. ABSTRACT. The use of telecommunication systems is increasing rapidly. Due to this rising trend, it’s important to create telecommunication systems that work at high frequencies. However, some atmospheric impairments may well appear when working at these kinds of frequencies such as attenuation due to rain or gases which affect the signal. These effects could even render communication impossible. The aim of this Project is the synthesis of a time series, studying the effect of rain attenuation on a 38 GHz radio link located in Madrid. To carry out this study, the rain attenuation effects on horizontal radio links described in the ITU-R P.530-15 method are used as the starting point. The results obtained enable us to examine the validity of the practical application of the ITU R-P.1853-1 method for tropospheric attenuation time series synthesis. This method proposes a synthesizer which can combine the different effects caused by tropospheric attenuation that will be used for the study. This synthesizer has been implemented using the program Matlab. The first part of the Project starts by describing the theoretical foundations used during the Project performance. It begins with a description of radio links explaining their different types and characteristics. Following on from that, various propagation effects that affect the said radio link are shown. Finally, the theoretical foundations of the time series are presented, as well as its implementation in a communication link. In turn, the second part of the Project explains the data analysis that has been carried out. Firstly an analysis of the intensity of rain is made based on the ITU-R P.837-6 Recommendation. Subsequently, the results of the rain attenuation are presented, thus making a comparison between the ITU-R P.530-15 model, the ITU-R P.1853-1 model and graphs obtained from experimental data. Lastly, the Project shows the conclusions that have been drawn as well as propose future research lines that can be proposed so as to continue with the stud further.

Impact of using new commercial glutathione enriched inactive dry yeast oenological preparations on the aroma and sensory properties of wines

The effect of the addition of a commercial enriched glutathione inactive dry yeast oenological preparation in the volatile and sensory properties of industrially manufactured rosé Grenache wines was evaluated during their shelf-life. In addition, triangle tests were performed at different times during wine aging (among 1 and 9 months) to determine the sensory differences between wines with and without glutathione inactive dry yeast preparations. Descriptive sensory analysis with a trained panel was carried out when sensory differences in the triangle test were noticed. In addition, consumer tests were performed in order to investigate consumers’ acceptability of wines. Results revealed significant sensory differences between control and glutathione inactive dry yeast wines after 9 months of aging. At that time, glutathione inactive dry yeast wines were more intense in fruity aromas (strawberry, banana) and less intense in yeast notes than control wine. The impact of the glutathione inactive dry yeast in the aroma might be the consequence of different effects that these preparations could induce in wine composition: modification of yeast byproducts during fermentation, release of volatile compounds from inactive dry yeast, interaction of wine volatile compounds with yeast macromolecules from inactive dry yeast and a possible antioxidant effect of the glutathione released by the inactive dry yeast preparation on some specific volatile compounds.

How future trends may affect international cooperation in planning education : the case of Spain and Latin America

Despite the benefits for exc hanging experiences among planners at the global scale, the strong context dependency of urban planning creates in many instances significant difficulties to extrapolate experiences from one geographical context to the other. If progress is to be achieved in international cooperation programmes, differences and commonalities should be assessed before la unching any academic initiative. In that respect, this p aper makes a brief foresight exercise on how future trends and challenges, which may affect the urban pl anning field, should be taken into consideration according to two different contexts: Spain and Latin America. A segmentation matrix is used to expose a nd discuss the different effects of future trends on both contexts. Some tentative conclusions are drawn for the development of international educational programmes

Effects of dietary restriction combined with different exercise programs or physical activity recommendations on blood lipids in overweight adults

Background and aim: Many exercise studies, although generally showing the beneficial effects of supervised aerobic, resistance or combined exercise on blood lipids, have sometimes reached equivocal conclusions. The aim of this study is to evaluate the impact of different programs that combined exercise and dietary restriction on blood lipids versus a clinical practice intervention for weight loss, in overweight adults. Methods: For this study 66 subjects participated in a supervised 22 weeks training program, composed of three sessions per week and they were randomized in three groups: strength training (S; n = 19), endurance training (E; n = 25), a combination of E and S (SE; n = 22). Eighteen subjects served as physical activity group (PA) that followed a clinical intervention consisted of physical activity recommendations. All groups followed the same dietary treatment, and blood samples were obtained for lipids measurements, at the beginning and end of the study. Results: Lipid profile improved in all groups. No significant differences for baseline and post-training values were observed between groups. In general, SE and PA decreased low-density lipoprotein cholesterol (LDL-C) values (p menor que 0.01). S decreased triglyceride levels (p menor que 0.01) and E, SE, and PA decreased total cholesterol levels (p menor que 0.05, p menor que 0.01 and p menor que 0.01, respectively). Conclusions: These results suggest that an intervention program of supervised exercise combined with diet restriction did not achieved further improvements in blood lipid profile than diet restriction and physical activity recommendations, in overweight adults. (Clinical Trials gov number: NCT01116856).

Effects of different soil management practices on soil mechanic resistance and seed depth placement in a maize crop in Alentejo, Portugal Mediterranean region.

No tillage, minimum tillage and conventional tillage practices are commonly used in maize crops in Alentejo, affecting soil physic conditions and determining seeders performance. Seeders distribution can be evaluated in the longitudinal and vertical planes. Vertical plane is specified by seeding depth (Karayel et al., 2008). If, in one hand seeding depth uniformity is a goal for all crop establishment , in the other hand, seeders furrow openers depth control is never constant depending on soil conditions. Seed depth uniformity affects crop emergence, Liu et al. (2004) showed an higher correlation between crop productivity and emergence uniformity than with longitudinal plants distribution. Neto et al. (2007) evaluating seed depth placement by measuring maize mesocotyl length under no tillage conditions in 38 farms concluded that 20% of coefficient of variation suggests the need of improvement seeders depth control mechanisms. The objective of this study was to evaluate casual relationships and create spatial variability maps between soil mechanic resistance and vertical distribution under three different soil practices to improve seed depth uniformity.

Thermal and mechanical effects of different excitation modes based on low frequency laser modulation in optical hyperthermia

The low frequency modulation of the laser source (menor que30KHz) allows the generation of a pulsed signal that intermittently excites the gold nanorods. The temperature curves obtained for different frequencies and duty cycles of modulation but with equal average power and identical laser parameters, show that the thermal behavior in continuous wave and modulation modes is the same. However, the cell death experiments suggest that the percentage of death is higher in the cases of modulation. This observation allows us to conclude that there are other effects in addition to temperature that contribute to the cellular death. The mechanical effects like sound or pressure waves are expected to be generated from thermal expansion of gold nanorods. In order to study the behavior and magnitude of these processes we have developed a measure device based on ultrasound piezoelectric receivers (25KHz) and a lock-in amplifier that is able to detect the sound waves generated in samples of gold nanorods during laser irradiation providing us a voltage result proportional to the pressure signal. The first results show that the pressure measurements are directly proportional to the concentration of gold nanorods and the laser power, therefore, our present work is focused on determine the real influence of these effects in the cell death process.

Induction of ovulation in rabbits by adding Lecirelin to the seminal dose: In vitro and in vivo effects of different excipients.

This study evaluates the effect of Lecirelin (Dalmarelin®, Fatro, Italy) diluted in different excipients (benzilic alcohol, benzoic acid and paraben) added to a seminal dose on LH concentrations, progesterone concentrations and ovarian status in rabbits. The in vitro effect on spermatozoa was also tested. A total of 100 multiparous female rabbits were divided into 5 groups, which at the moment of AI, received 0.2 mL (5 μg/dose) intramuscular (im) inoculation of Lecirelin (control) or the same Lecirelin dose administered intravaginally (iv) with the seminal dose alone (Lecirelin group) or with benzilic alcohol (Lecirelin BA group), benzoic acid (Lecirelin BAc group) or parabens (Lecirelin PA group) as an excipient. After 7 days, 10 rabbits per group were euthanized to analyze their ovarian status. In the control group, a high LH peak was detected 30 min post AI, while in the iv groups a slight increase in LH occurred after 120 min. The ovulation and fertility rate was similar in control and Lecirelin groups, while the lowest fertility rate was detected in the Lecirelin BA group. In a second experiment, the semen samples collected from male rabbits were diluted in TALP (control) or mixed with the 5 μg of Lecirelin solutions used in the first experiment. The highest percentage of capacitated sperm (68.3%) was recorded in the Lecirelin PA. The lowest percentages were observed in the Lecirelin BA and BAc groups. In conclusion, the iv administration of Lecirelin represents an alternative method for simplifying rabbit insemination procedures.

Effects of different swimming race constraints on turning movements

The aim of this study was to investigate the effects of different swimming race constraints on the evolution of turn parameters. One hundred and fifty-eight national and regional level 200-m (meters) male swimming performances were video-analyzed using the individualized-distance model in the Open Comunidad de Madrid tournament. Turn (p < .001, ES = 0.36) and underwater distances (p < .001, ES = 0.38) as well as turn velocity (p < .001, ES = 0.69) significantly dropped throughout the race, although stroke velocity and underwater velocity were maintained in the last lap of the race (p > .05). Higher expertise swimmers obtained faster average velocities and longer distances in all the turn phases (p < .001, ES = 0.59), except the approach distance. In addition, national level swimmers showed the ability to maintain most of the turn parameters throughout the race, which assisted them in improving average velocity at the end of races. Therefore, the variations in the turning movements of a swimming race were expertise-related and focused on optimizing average velocity. Turning skills should be included in the swimming race action plan.

Plant development effects of biochars from different raw materials

Biochar can provide multiple benefits in the ecosystem. However, the presence of phytotoxic compounds in some biochars is an important concern that needs to be addressed and that depends on the raw material and the pyrolysis conditions used in biochar production. For example, sewage sludge biochars can have elevated heavy metal con- tents as they were present in the feedstock and were enriched during pyrolysis. Also during carbonization, some phytotoxic compounds such as polycyclic aromatic hydrocarbons (PAHs), polyphenols or volatile organic com- pounds (VOCs) could be formed representing a risk of contamination to soils and crops. In this work we report the results from seed germination and plant development for three biochars prepared from wood, paper sludge plus wheat husks and sewage sludge. Five higher plant species (cress, lentils, cucumber, tomato and lettuce) were studied. Biochar from wood shows seed inhibition in several species and the paper sludge biochar on lettuce. For the rest, the effect on seed germination was positive. No inhibition of root growth was detected, but in some cases leaves and stems growth were inhibited. Our results are significant in terms of advancing or current understanding on the impacts of biochar on vegetative growth and linking those effects to biochar properties.