The effect of a mono component protease and different AMEn levels in broiler diets on growth performance from 1 to 18 days of age.

The objective of the present study was to evaluate the effect of the inclusion of a mono component serine protease (RONOZYME ProAct, DSM Nutritional Products) in diets with two different AMEn contents on apparent ileal digestibility (AID) of amino acids (AA) and growth performance in broilers from 1 to 18 days of age.

Ti/Pd/Ag Contacts to n-Type GaAs for High Current Density Devices

The metallization stack Ti/Pd/Ag on n-type Si has been readily used in solar cells due to its low metal/semiconductor specific contact resistance, very high sheet conductance, bondability, long-term durability, and cost-effectiveness. In this study, the use of Ti/Pd/Ag metallization on n-type GaAs is examined, targeting electronic devices that need to handle high current densities and with grid-like contacts with limited surface coverage (i.e., solar cells, lasers, or light emitting diodes). Ti/Pd/Ag (50 nm/50 nm/1000 nm) metal layers were deposited on n-type GaAs by electron beam evaporation and the contact quality was assessed for different doping levels (from 1.3 × 1018 cm−3 to 1.6 × 1019 cm−3) and annealing temperatures (from 300°C to 750°C). The metal/semiconductor specific contact resistance, metal resistivity, and the morphology of the contacts were studied. The results show that samples doped in the range of 1018 cm−3 had Schottky-like I–V characteristics and only samples doped 1.6 × 1019 cm−3 exhibited ohmic behavior even before annealing. For the ohmic contacts, increasing annealing temperature causes a decrease in the specific contact resistance (ρ c,Ti/Pd/Ag ~ 5 × 10−4 Ω cm2). In regard to the metal resistivity, Ti/Pd/Ag metallization presents a very good metal conductivity for samples treated below 500°C (ρ M,Ti/Pd/Ag ~ 2.3 × 10−6 Ω cm); however, for samples treated at 750°C, metal resistivity is strongly degraded due to morphological degradation and contamination in the silver overlayer. As compared to the classic AuGe/Ni/Au metal system, the Ti/Pd/Ag system shows higher metal/semiconductor specific contact resistance and one order of magnitude lower metal resistivity.

Ball possession effectiveness in men's and women's elite basketball according to situational variables in different game periods

The aim of the present study was to identify the importance of floorball tactical variables to predict ball possession effectiveness, when controlling quality of opposition and game periods. The sample was composed by 1500 ball possessions, corresponding to 14 games randomly selected from the International Championships played during 2008 and 2010 (World Championship, Four nations tournament and classificatory phases for World Championship) by teams from different competition levels (HIGH, INTERMEDIATE and LOW). The effects of the predictor variables on successful ball possessions according to the three game contexts (HIGH vs. HIGH; HIGH vs. LOW; LOW vs. LOW games) were analyzed using Binomial Logistic Regressions. The results showed no interaction with the game period. In HIGH vs. HIGH games, quality of opposition showed an association with ball possession effectiveness with ending zone, offensive system, possession duration, height of shooting and defensive pressures previous to the shot. In HIGH vs. LOW games the important factors were the starting zone, possession duration, defensive pressure previous to the last pass and to the shot, technique of shooting and the number players involved in each ball possession. Finally, in LOW vs. LOW games, the results emphasized the importance of starting and ending zones, the number of passes used and the technique of shooting. In conclusion, elite floorball performance is mainly affected by quality of opposition showing different game patterns in each context that should be considered by coaches when preparing practices and competitions.

Territorial cohesion impacts of high-speed rail under different zoning systems

Large-scale transport infrastructure projects such as high-speed rail (HSR) produce significant effects on the spatial distribution of accessibility. These effects, commonly known as territorial cohesion effects, are receiving increasing attention in the research literature. However, there is little empirical research into the sensitivity of these cohesion results to methodological issues such as the definition of the limits of the study area or the zoning system. In a previous paper (Ortega et al., 2012), we investigated the influence of scale issues, comparing the cohesion results obtained at four different planning levels. This paper makes an additional contribution to our research with the investigation of the influence of zoning issues. We analyze the extent to which changes in the size of the units of analysis influence the measurement of spatial inequalities. The methodology is tested by application to the Galician (north-western) HSR corridor, with a length of nearly 670 km, included in the Spanish PEIT (Strategic Transport and Infrastructure Plan) 2005-2020. We calculated the accessibility indicators for the Galician HSR corridor and assessed their corresponding territorial distribution. We used five alternative zoning systems depending on the method of data representation used (vector or raster), and the level of detail (cartographic accuracy or cell size). Our results suggest that the choice between a vector-based and raster-based system has important implications. The vector system produces a higher mean accessibility value and a more polarized accessibility distribution than raster systems. The increased pixel size of raster-based systems tends to give rise to higher mean accessibility values and a more balanced accessibility distribution. Our findings strongly encourage spatial analysts to acknowledge that the results of their analyses may vary widely according to the definition of the units of analysis.

3-D modeling of perimeter recombination in GaAs diodes and its influence on concentrator solar cells

This paper describes a complete modelling of the perimeter recombination of GaAs diodes which solves most unknowns and suppresses the limitations of previous models. Because of the three dimensional nature of the implemented model, it is able to simulate real devices. GaAs diodes on two epiwafers with different base doping levels, sizes and geometries, namely square and circular are manufactured. The validation of the model is achieved by fitting the experimental measurements of the dark IV curve of the manufactured GaAs diodes. A comprehensive 3-D description of the occurring phenomena affecting the perimeter recombination is supplied with the help of the model. Finally, the model is applied to concentrator GaAs solar cells to assess the impact of their doping level, size and geometry on the perimeter recombination.

Real Options: A Tool for Managing Technical Risk in a Mine Plan

NPV is a static measure of project value which does not discriminate between levels of internal and external risk in project valuation. Due to current investment project?s characteristics, a much more complex model is needed: one that includes the value of flexibility and the different risk levels associated with variables subject to uncertainty (price, costs, exchange rates, grade and tonnage of the deposits, cut off grade, among many others). Few of these variables present any correlation or can be treated uniformly. In this context, Real Option Valuation (ROV) arose more than a decade ago, as a mainly theoretical model with the potential for simultaneous calculation of the risk associated with such variables. This paper reviews the literature regarding the application of Real Options Valuation in mining, noting the prior focus on external risks, and presents a case study where ROV is applied to quantify risk associated to mine planning.

InN/GaN heterojunction electrical behavior

Indium nitride (InN) has been the subject of intense research in recent years. Some of its most attractive features are its excellent transport properties such as its small band edge electron effective mass, high electron mobilities and peak drift velocities, and high frequency transient drift velocity oscillations [1]. These suggest enormous potential applications for InN in high frequency electronic devices. But to date the high unintentional bulk electron concentration (n~1018 cm-3) of undoped InN samples and the surface electron accumulation layer make it a hard task to create a reliable metalsemiconductor Schottky barrier. Some attempts have been made to overcome this problem by means of material oxidation [2] or deposition of insulators [3]. In this work we present a way to obtain an electrical rectification behaviour by means of heterojunction growth. Due to the big band gap differences among nitride semiconductors, it’s possible to create a structure with high band offsets. In InN/GaN heterojunctions, depending on the GaN doping, the magnitude of conduction and valence band offset are critical parameters which allow distinguishing among different electrical behaviours. The earliest estimate of the valence band offset at an InN–GaN heterojunction in a wurtzite structure was measured to be ~0.85 eV [4], while the Schottky barrier heights were determined to be ~ 1,4 eV [5].We grew In-face InN layer with varying thickness (between 150 nm and 1 mm) by plasma assisted molecular beam epitaxy (PA-MBE) on GaNntemplates (GaN/Al2O3), with temperatures ranging between 300°C and 450°C. The different doping in GaN template (Si doping, Fe doping and Mg doping) results in differences in band alignments of the two semiconductors changing electrical barriers for carriers and consequently electrical conduction behaviour. The processing of the devices includes metallization of the ohmic contacts on InN and GaN, for which we used Ti/Al/Ni/Au. Whereas an ohmic contact on InN is straightforward, the main issue was the fabrication of the contact on GaN due to the very low decomposition temperature of InN. A standard ohmic contact on GaN is generally obtained by high temperature rapid thermal annealing (RTA), typically done between 500ºC and 900ºC[6]. In this case, the limitation due to the presence of In-face InN imposes an upper limit on the temperature for the thermal annealing process and ohmic contact formation of about 450°C. We will present results on the morphology of the InN layers by X-Ray diffraction and SEM, and electrical measurements, in particular current-voltage and capacitance-voltage characteristics.

A Multiagent system model which suggests solutions to fuzzy incidents in the field of telecommunications

This article presents the model of a multi-agent system (SMAF), which objectives are the input of fuzzy incidents as the human experts express them with different severities degrees and the further search and suggestion of solutions. The solutions will be later confirm or not by the users. This model was designed, implemented and tested in the telecommunications field, with heterogeneous agents in a cooperative model. In the design, different abstract levels where considered, according to the agents? objectives, their ways to carry it out and the environment in which they act. Each agent is modeled with different spectrum of the knowledge base

Diffusion of Zn into GaAs and AlGaAs from isothermal Liquid-phase epitaxy solutions

In this work we present results of zinc diffusion in GaAs using the liquid phase epitaxy technique from liquid solutions of Ga‐As‐Zn and Ga‐As‐Al‐Zn. Using silicon‐doped n‐GaAs substrates, working at a diffusion temperature of 850 °C, and introducing a dopant concentration ranging 1018–1019 cm−3, the most important findings regarding the diffusion properties are as follows: (a) zinc concentration in the solid depends on the square root of zinc atomic fraction in the liquid; (b) the diffusion is dominated by the interstitial‐substitutional process; (c) the diffusivity D varies as about C3 in the form D=2.9×10−67C3.05; (d) aluminum plays the role of the catalyst of the diffusion process, if it is introduced in the liquid solution, since it is found that D varies as (γAsXlAs)−1; (e) the zinc interstitial is mainly doubly ionized (Zn++i); (f) the zinc diffusion coefficient in Al0.85 Ga0.15 As is about four times greater than in GaAs; (g) by means of all these results, it is possible to control zinc diffusion processes in order to obtain optimized depth junctions and doping levels in semiconductor device fabrication.

Producción y gestión habitacional de los pobladores : articulación con la política de vivienda y barrio : trayectoria y problemática actual

Esta tesis analiza las acciones de los pobladores en la creación, consolidación y transformación de su hábitat y en su relación con la política pública de vivienda y barrio en Chile. A partir de la observación directa en terreno y de la revisión de material proveniente de diversas fuentes afirmamos que, aunque los pobladores han hecho un trabajo de producción del hábitat de gran magnitud y generalizado, las políticas públicas no han reconocido suficientemente su papel en la construcción de la ciudad, no han incorporado a cabalidad las potencialidades e innovaciones surgidas de sus prácticas y estrategias, y nunca les han abierto un espacio claro en la toma de decisiones y en la puesta en obra de los programas habitacionales. En el contexto latinoamericano, la política habitacional chilena de los últimos 20 años se ha considerado un éxito y un ejemplo a seguir, puesto que ha demostrado ser eficaz en la disminución del déficit habitacional. Sin embargo, ha tenido efectos urbanos y sociales nefastos, como la construcción de extensos bolsones periféricos de pobreza que se degradan aceleradamente, y la desintegración social que genera la expulsión de los sin casa a la periferia, donde pierden sus redes familiares y sociales. Desde una trinchera opuesta, los allegados, los sin casa que viven al alero de otras familias y representan la mayoría de la demanda por vivienda, exigen quedarse en barrios ya consolidados y evitan las periferias, en parte por mantener una red familiar y social que se sustenta en la proximidad física, en parte por los equipamientos y servicios con que cuentan estos barrios y la cercanía a las fuentes de empleo. Al mismo tiempo, los responsables de diseñar la política habitacional no han buscado establecer una forma de colaboración con los pobladores —principales receptores de la política— con el fin ajustar los programas públicos a las necesidades de las familias de bajos ingresos y a las realidades socioculturales de sus barrios. Por el contrario, han privilegiado una alianza con el sector privado, que conoce muy limitadamente las demandas de las familias. Así, en lugar de construir ciudades más justas, la política habitacional ha alimentado un mercado inmobiliario sustentado en la especulación del suelo y fomentado la industria de la construcción. La pregunta que guía esta investigación es cómo incorporar el conocimiento acumulado y los procedimientos probados por los pobladores al diseño y la implementación de programas habitacionales y urbanos que promuevan procesos de regeneración de las poblaciones y mejoren la distribución de la vivienda social en la ciudad. Sostenemos que los pobladores, a lo largo de una trayectoria de más de medio siglo, han adquirido y consolidado todas las competencias para construir vivienda, mejorar sus barrios e incorporarse a la discusión sobre ordenamiento territorial. Así, hoy están capacitados para asumir un papel protagónico en la definición de políticas públicas que apunte a la construcción de ciudades más sostenibles y equitativas. La producción social del hábitat vinculada al derecho a la ciudad y a la participación de los pobladores «desde abajo» está bastante documentada en la literatura latinoamericana. En Chile se han escrito numerosos trabajos y evaluaciones sobre la política habitacional, pero los estudios sobre el movimiento de pobladores, enfocados desde las ciencias sociales o multidisciplinares, tienen un auge primero, durante los años 60 y principios de los 70 y luego, en la segunda mitad de los 80, pero posteriormente dejan de publicarse, a excepción de algunas investigaciones de historia urbana o social. En cuanto a los estudios que abordan las acciones de los pobladores desde una mirada puesta en los resultados de la producción y la gestión habitacional y urbana, estos han sido especialmente escasos y ninguno abarca un período largo. La tesis aborda entonces las acciones específicas que emprenden los pobladores a distintas escalas territoriales —el conjunto, el barrio, la población, la ciudad y el país—, su relación con la política habitacional y su articulación con los demás actores que intervienen en la producción material del hábitat. Lo realizado por los pobladores se estudia a la luz del largo plazo, desde la promulgación de la primera ley de vivienda en 1906 hasta nuestros días, con el énfasis puesto entre los años 1990 y 2010, período de producción masiva y sostenida de vivienda social, financiada por el Estado y construida por el sector privado en la periferia urbana, y más detalladamente entre 2006 y 2010, cuando los pobladores irrumpen con la «gestión vecinal» y la «autogestión» como medios para implementar los programas habitacionales del gobierno. Para ello se recorre toda la trayectoria y se complementa con procesos particulares, a la manera de un lente de acercamiento con el cual se focalizan y amplifican trece casos de estudios, para ilustrar modos de producción y gestión concretos y mostrar cómo estos se inscriben en modos de hacer genéricos de los pobladores. Finalmente, con el lente centrado en el último ciclo de este proceso escribimos el capítulo inédito de los últimos veinte años de esta historia. Primero se realiza la reconstrucción de tres casos de estudio «en profundidad», que incluyen la génesis, la consolidación y las transformaciones del conjunto o barrio. Estos casos de estudio «en profundidad» se ponen en perspectiva reconstruyendo la trayectoria histórica de la producción y gestión realizada por los pobladores. Esta reconstrucción de largo período se profundiza con tres casos de estudio «específicos», de dimensión histórica, que tratan el conflicto del acceso a suelo. Finalmente se analizan las interrogantes que plantean estos procesos hoy en día para la producción y gestión de vivienda y barrio a futuro, a partir de entrevistas a actores claves y de la reconstrucción de siete casos de estudio «específicos» de acceso a suelo ilustrativos del período actual. La tesis sustenta que los pobladores, con las acciones de gestión y autogestión que realizan desde 2006, e interviniendo en la discusión sobre los instrumentos de planificación territorial a partir del mismo año, se sitúan actualmente en una nueva plataforma de acción y negociación desde la cual pueden incorporarse, con todas las competencias necesarias, a la definición de las políticas públicas y así dotarlas de pertinencia y coherencia para contribuir a superar la pobreza con respuestas más acorde a sus realidades. ABSTRACT This thesis analyzes the actions of pobladores in the creation, consolidation and transformation of their habitat and their relationship with Chilean public housing and neighbourhood policy. Through direct observation in the field and the review of material from various sources we can affirm that although the pobladores have undertaken widespread work in the production of their environment, public policies have not sufficiently recognized their role in the construction of the city. Public policy has failed to fully incorporate the potential and innovation arising from practices and strategies employed by social housing recipients and has never opened a clear space for them in decision-making or the commissioning work of the housing programs. Within the Latin America context, the Chilean housing policy of the past 20 years has been considered a success and an example to follow given that it has proven effective in reducing the housing deficit. However it has had disastrous urban and social effects, such as construction of large peripheral pockets of poverty that degrade rapidly, and generates social disintegration through the expulsion of the homeless to the periphery, where they lose their family and social networks. On another front those homeless who live under the roof of relatives and who represent the majority of demand for social housing, request to stay in consolidated neighbourhoods avoiding the periphery, partly to maintain family and social networks based on physical proximity and partly because of the facilities and services available in these neighbourhoods and their adjacency to sources of employment. At the same time, those responsible for designing housing policy have not sought to establish a form of collaboration with the pobladores in order to adjust the public programs to the needs of low-income families and the socio-cultural realities of their neighbourhoods. On the contrary an alliance with the private sector has been favored, a sector which has very limited knowledge of the demands of the recipients. Therefore instead of building more equal cities, housing policy has fueled a housing market which supports land speculation and promotes the construction industry. The question leading this research is how to incorporate the accumulated knowledge and proven procedures of the pobladores in the design and implementation of programs that promote housing and urban regeneration processes and which could improve the distribution of social housing in the city. We maintain that social housing recipients over the course of half a century have acquired and consolidated all the skills to build housing, improve neighborhoods and join the discussion on city planning. These residents are now capable of assuming a leading role in defining public policies that aim to build more sustainable and equitable cities. The social production of the environment linked to the right to the city and resident participation from the «bottom-up» is well documented in Latin American literature. In Chile there are extensive written works and assessments on housing policy with multidisciplinary or social science studies on the movement of the pobladores peaking during the 60’s and early 70’s and then again in the second half of the 80’s but afterwards this stops, with the exception of some research on social or urban history. As for studies that address the actions of the pobladores looking at the results of production and housing and urban management these have been particularly scarce and none of which cover a long period of time. The thesis then addresses the specific actions undertaken by the pobladores at different territorial levels; the housing development, the neighbourhood, the community, the city and State, and their relation to housing policy and its coordination with other actors involved in the production process of the built environment. The accomplishments of the pobladores is studied over the long term, since the enactment of the first housing law in 1906 to the present, with an emphasis between 1990 and 2010, a period of mass production and sustained social housing which was State-funded and built by the private sector in the urban periphery, and in particular between 2006 and 2010, when the pobladores break with the «neighborhood management» and «self-management» as a means to implement the housing programs of the government. To this end the entire process is outlined and is complemented by specific processes which are placed under a lens in order to focus and amplify thirteen case studies illustrating actual ways of production and management and to show how these ways of doing things are generic to the pobladores. Finally, with the lens focused on the last cycle of this process we write the new chapter of the last twenty years of this history. First there is a reconstruction of three case studies «in depth», including their origins, consolidation and the transformation of the sector or neighborhood. These «in depth» case studies are put into perspective reconstructing the historical trajectory of the production and management by the pobladores. This reconstruction over a long period is given great depth by three «specific» case studies, of historical importance, dealing with the conflict of access to land. Finally we analyze the questions raised by these processes for the production and management of housing and neighborhood in the future, based on interviews with key players and the reconstruction of seven case studies specifically regarding access to land and which are illustrative of current practice. The thesis maintains that since 2006 the pobladores through actions of management and selfmanagement and their intervention in the debate on territorial planning has placed them on a new platform for action and negotiation from which they can incorporate themselves, with all the necessary capacities, in the definition of public policy and therefore provide it with a pertinence and coherence to help towards overcoming poverty with answers more according to their realities.

Performance analysis of AlGaAs/GaAs tunnel junctions for ultra-high concentration photovoltaics

An n(++)-GaAs/p(++)-AlGaAs tunnel junction with a peak current density of 10 100Acm(-2) is developed. This device is a tunnel junction for multijunction solar cells, grown lattice-matched on standard GaAs or Ge substrates, with the highest peak current density ever reported. The voltage drop for a current density equivalent to the operation of the multijunction solar cell up to 10 000 suns is below 5 mV. Trap-assisted tunnelling is proposed to be behind this performance, which cannot be justified by simple band-to-band tunnelling. The metal-organic vapour-phase epitaxy growth conditions, which are in the limits of the transport-limited regime, and the heavy tellurium doping levels are the proposed origins of the defects enabling trap-assisted tunnelling. The hypothesis of trap-assisted tunnelling is supported by the observed annealing behaviour of the tunnel junctions, which cannot be explained in terms of dopant diffusion or passivation. For the integration of these tunnel junctions into a triple-junction solar cell, AlGaAs barrier layers are introduced to suppress the formation of parasitic junctions, but this is found to significantly degrade the performance of the tunnel junctions. However, the annealed tunnel junctions with barrier layers still exhibit a peak current density higher than 2500Acm(-2) and a voltage drop at 10 000 suns of around 20 mV, which are excellent properties for tunnel junctions and mean they can serve as low-loss interconnections in multijunction solar cells working at ultra-high concentrations.

A methodology for territorial distribution of CO2 emission reductions in transport sector

Greenhouse gas emission reduction is the pillar of the Kyoto Protocol and one of the main goals of the European Union (UE) energy policy. National reduction targets for EU member states and an overall target for the EU-15 (8%) were set by the Kyoto Protocol. This reduction target is based on emissions in the reference year (1990) and must be reached by 2012. EU energy policy does not set any national targets, only an overall reduction target of 20% by 2020. This paper transfers global greenhouse gas emission reduction targets in both these documents to the transport sector and specifically to CO2 emissions. It proposes a nonlinear distribution method with objective, dynamic targets for reducing CO2 emissions in the transport sector, according to the context and characteristics of each geographical area. First, we analyse CO2 emissions from transport in the reference year (1990) and their evolution from 1990 to 2007. We then propose a nonlinear methodology for distributing dynamic CO2 emission reduction targets. We have applied the proposed distribution function for 2012 and 2020 at two territorial levels (EU member states and Spanish autonomous regions). The weighted distribution is based on per capita CO2 emissions and CO2 emissions per gross domestic product. Finally, we show the weighted targets found for each EU member state and each Spanish autonomous region, compare them with the real achievements to date, and forecast the situation for the years the Kyoto and EU goals are to be met. The results underline the need for ?weighted? decentralised decisions to be made at different territorial levels with a view to achieving a common goal, so relative convergence of all the geographical areas is reached over time. Copyright © 2011 John Wiley & Sons, Ltd.

Adaptive liquid-crystal phase-only passive devices

This PhD work is focused on liquid crystal based tunable phase devices with special emphasis on their design and manufacturing. In the course of the work a number of new manufacturing technologies have been implemented in the UPM clean room facilities, leading to an important improvement in the range of devices being manufactured in the laboratory. Furthermore, a number of novel phase devices have been developed, all of them including novel electrodes, and/or alignment layers. The most important manufacturing progress has been the introduction of reactive ion etching as a tool for achieving high resolution photolithography on indium-tin-oxide (ITO) coated glass and quartz substrates. Another important manufacturing result is the successful elaboration of a binding protocol of anisotropic conduction adhesives. These have been employed in high density interconnections between ITO-glass and flexible printed circuits. Regarding material characterization, the comparative study of nonstoichiometric silicon oxide (SiOx) and silica (SiO2) inorganic alignment layers, as well as the relationship between surface layer deposition, layer morphology and liquid crystal electrooptical response must be highlighted, together with the characterization of the degradation of liquid crystal devices in simulated space mission environment. A wide variety of phase devices have been developed, with special emphasis on beam steerers. One of these was developed within the framework of an ESA project, and consisted of a high density reconfigurable 1D blaze grating, with a spatial separation of the controlling microelectronics and the active, radiation exposed, area. The developed devices confirmed the assumption that liquid crystal devices with such a separation of components, are radiation hard, and can be designed to be both vibration and temperature sturdy. In parallel to the above, an evenly variable analog beam steering device was designed, manufactured and characterized, providing a narrow cone diffraction free beam steering. This steering device is characterized by a very limited number of electrodes necessary for the redirection of a light beam. As few as 4 different voltage levels were needed in order to redirect a light beam. Finally at the Wojskowa Akademia Techniczna (Military University of Technology) in Warsaw, Poland, a wedged analog tunable beam steering device was designed, manufactured and characterized. This beam steerer, like the former one, was designed to resist the harsh conditions both in space and in the context of the shuttle launch. Apart from the beam steering devices, reconfigurable vortices and modal lens devices have been manufactured and characterized. In summary, during this work a large number of liquid crystal devices and liquid crystal device manufacturing technologies have been developed. Besides their relevance in scientific publications and technical achievements, most of these new devices have demonstrated their usefulness in the actual work of the research group where this PhD has been completed. El presente trabajo de Tesis se ha centrado en el diseño, fabricación y caracterización de nuevos dispositivos de fase basados en cristal líquido. Actualmente se están desarrollando dispositivos basados en cristal líquido para aplicaciones diferentes a su uso habitual como displays. Poseen la ventaja de que los dispositivos pueden ser controlados por bajas tensiones y no necesitan elementos mecánicos para su funcionamiento. La fabricación de todos los dispositivos del presente trabajo se ha realizado en la cámara limpia del grupo. La cámara limpia ha sido diseñada por el grupo de investigación, es de dimensiones reducidas pero muy versátil. Está dividida en distintas áreas de trabajo dependiendo del tipo de proceso que se lleva a cabo. La cámara limpia está completamente cubierta de un material libre de polvo. Todas las entradas de suministro de gas y agua están selladas. El aire filtrado es constantemente bombeado dentro de la zona limpia, a fin de crear una sobrepresión evitando así la entrada de aire sin filtrar. Las personas que trabajan en esta zona siempre deben de estar protegidas con un traje especial. Se utilizan trajes especiales que constan de: mono, máscara, guantes de látex, gorro, patucos y gafas de protección UV, cuando sea necesario. Para introducir material dentro de la cámara limpia se debe limpiar con alcohol y paños especiales y posteriormente secarlos con nitrógeno a presión. La fabricación debe seguir estrictamente unos pasos determinados, que pueden cambiar dependiendo de los requerimientos de cada dispositivo. Por ello, la fabricación de dispositivos requiere la formulación de varios protocolos de fabricación. Estos protocolos deben ser estrictamente respetados a fin de obtener repetitividad en los experimentos, lo que lleva siempre asociado un proceso de fabricación fiable. Una célula de cristal líquido está compuesta (de forma general) por dos vidrios ensamblados (sándwich) y colocados a una distancia determinada. Los vidrios se han sometido a una serie de procesos para acondicionar las superficies internas. La célula se llena con cristal líquido. De forma resumida, el proceso de fabricación general es el siguiente: inicialmente, se cortan los vidrios (cuya cara interna es conductora) y se limpian. Después se imprimen las pistas sobre el vidrio formando los píxeles. Estas pistas conductoras provienen del vidrio con la capa conductora de ITO (óxido de indio y estaño). Esto se hace a través de un proceso de fotolitografía con una resina fotosensible, y un desarrollo y ataque posterior del ITO sin protección. Más tarde, las caras internas de los vidrios se acondicionan depositando una capa, que puede ser orgánica o inorgánica (un polímero o un óxido). Esta etapa es crucial para el funcionamiento del dispositivo: induce la orientación de las moléculas de cristal líquido. Una vez que las superficies están acondicionadas, se depositan espaciadores en las mismas: son pequeñas esferas o cilindros de tamaño calibrado (pocos micrómetros) para garantizar un espesor homogéneo del dispositivo. Después en uno de los sustratos se deposita un adhesivo (gasket). A continuación, los sustratos se ensamblan teniendo en cuenta que el gasket debe dejar una boca libre para que el cristal líquido se introduzca posteriormente dentro de la célula. El llenado de la célula se realiza en una cámara de vacío y después la boca se sella. Por último, la conexión de los cables a la célula y el montaje de los polarizadores se realizan fuera de la sala limpia (Figura 1). Dependiendo de la aplicación, el cristal líquido empleado y los demás componentes de la célula tendrán unas características particulares. Para el diseño de los dispositivos de este trabajo se ha realizado un estudio de superficies inorgánicas de alineamiento del cristal líquido, que será de gran importancia para la preparación de los dispositivos de fase, dependiendo de las condiciones ambientales en las que vayan a trabajar. Los materiales inorgánicos que se han estudiado han sido en este caso SiOx y SiO2. El estudio ha comprendido tanto los factores de preparación influyentes en el alineamiento, el comportamiento del cristal líquido al variar estos factores y un estudio de la morfología de las superficies obtenidas.

Seismic Hazard and Ground Motion Characterization at the Itoiz Dam (Northern Spain).

This paper presents a new hazard-consistent ground motion characterization of the Itoiz dam site, located in Northern Spain. Firstly, we propose a methodology with different approximation levels to the expected ground motion at the dam site. Secondly, we apply this methodology taking into account the particular characteristics of the site and of the dam. Hazard calculations were performed following the Probabilistic Seismic Hazard Assessment method using a logic tree, which accounts for different seismic source zonings and different ground-motion attenuation relationships. The study was done in terms of peak ground acceleration and several spectral accelerations of periods coinciding with the fundamental vibration periods of the dam. In order to estimate these ground motions we consider two different dam conditions: when the dam is empty (T = 0.1 s) and when it is filled with water to its maximum capacity (T = 0.22 s). Additionally, seismic hazard analysis is done for two return periods: 975 years, related to the project earthquake, and 4,975 years, identified with an extreme event. Soil conditions were also taken into account at the site of the dam. Through the proposed methodology we deal with different forms of characterizing ground motion at the study site. In a first step, we obtain the uniform hazard response spectra for the two return periods. In a second step, a disaggregation analysis is done in order to obtain the controlling earthquakes that can affect the dam. Subsequently, we characterize the ground motion at the dam site in terms of specific response spectra for target motions defined by the expected values SA (T) of T = 0.1 and 0.22 s for the return periods of 975 and 4,975 years, respectively. Finally, synthetic acceleration time histories for earthquake events matching the controlling parameters are generated using the discrete wave-number method and subsequently analyzed. Because of the short relative distances between the controlling earthquakes and the dam site we considered finite sources in these computations. We conclude that directivity effects should be taken into account as an important variable in this kind of studies for ground motion characteristics.

GreenDisc: a HW/SW energy optimization framework in globally distributed computation

In recent future, wireless sensor networks (WSNs) will experience a broad high-scale deployment (millions of nodes in the national area) with multiple information sources per node, and with very specific requirements for signal processing. In parallel, the broad range deployment of WSNs facilitates the definition and execution of ambitious studies, with a large input data set and high computational complexity. These computation resources, very often heterogeneous and driven on-demand, can only be satisfied by high-performance Data Centers (DCs). The high economical and environmental impact of the energy consumption in DCs requires aggressive energy optimization policies. These policies have been already detected but not successfully proposed. In this context, this paper shows the following on-going research lines and obtained results. In the field of WSNs: energy optimization in the processing nodes from different abstraction levels, including reconfigurable application specific architectures, efficient customization of the memory hierarchy, energy-aware management of the wireless interface, and design automation for signal processing applications. In the field of DCs: energy-optimal workload assignment policies in heterogeneous DCs, resource management policies with energy consciousness, and efficient cooling mechanisms that will cooperate in the minimization of the electricity bill of the DCs that process the data provided by the WSNs.