Cooperation between expert knowledge and data mining discovered knowledge: Lessons learned

Expert systems are built from knowledge traditionally elicited from the human expert. It is precisely knowledge elicitation from the expert that is the bottleneck in expert system construction. On the other hand, a data mining system, which automatically extracts knowledge, needs expert guidance on the successive decisions to be made in each of the system phases. In this context, expert knowledge and data mining discovered knowledge can cooperate, maximizing their individual capabilities: data mining discovered knowledge can be used as a complementary source of knowledge for the expert system, whereas expert knowledge can be used to guide the data mining process. This article summarizes different examples of systems where there is cooperation between expert knowledge and data mining discovered knowledge and reports our experience of such cooperation gathered from a medical diagnosis project called Intelligent Interpretation of Isokinetics Data, which we developed. From that experience, a series of lessons were learned throughout project development. Some of these lessons are generally applicable and others pertain exclusively to certain project types.

Impact of Nuclear Data Uncertainties on Advanced Fuel Cycles and Their Irradiated Fuel - A comparison between Libraries

The uncertainties on the isotopic composition throughout the burnup due to the nuclear data uncertainties are analysed. The different sources of uncertainties: decay data, fission yield and cross sections; are propagated individually, and their effect assessed. Two applications are studied: EFIT (an ADS-like reactor) and ESFR (Sodium Fast Reactor). The impact of the uncertainties on cross sections provided by the EAF-2010, SCALE6.1 and COMMARA-2.0 libraries are compared. These Uncertainty Quantification (UQ) studies have been carried out with a Monte Carlo sampling approach implemented in the depletion/activation code ACAB. Such implementation has been improved to overcome depletion/activation problems with variations of the neutron spectrum.

An approach to stakeholders involvement in the preparedness for nuclear and radiological emergency response & recovery in Spain

The elaboration of a generic decision-making strategy to address the evolution of an emergency situation, from the stages of response to recovery, and including a planning stage, can facilitate timely, effective and consistent decision making by the response organisations at every level within the emergency management structure and between countries, helping to ensure optimal protection of health, environment, and society. The degree of involvement of stakeholders in this process is a key strategic element for strengthening the local preparedness and response and can help a successful countermeasures strategy. A significant progress was made with the multi-national European project EURANOS (2004-2009) which brought together best practice, knowledge and technology to enhance the preparedness for Europe's response to any radiation emergency and long term contamination. The subsequent establishment of a European Technology Platform and the recent launch of the research project NERIS-TP ("Towards a self sustaining European Technology Platform (NERIS-TP) on Preparedness for Nuclear and Radiological Emergency Response and Recovery") are aimed to continue with the remaining tasks for gaining appropriate levels of emergency preparedness at local level in most European countries. One of the objectives of the NERIS-TP project is: Strengthen the preparedness at the local/national level by setting up dedicated fora and developing new tools or adapting the tools developed within the EURANOS projects (such as the governance framework for preparedness, the handbooks on countermeasures, the RODOS system, and the MOIRA DSS for long term contamination in catchments) to meet the needs of local communities. CIEMAT and UPM in close interaction with the Nuclear Safety Council will explore, within this project, the use and application in Spain of such technical tools, including other national tools and information and communication strategies to foster cooperation between local, national and international stakeholders. The aim is identify and involve relevant stakeholders in emergency preparedness to improve the development and implementation of appropriate protection strategies as part of the consequence management and the transition to recovery. In this paper, an overview of the "state of the art" on this area in Spain and the methodology and work Plan proposed by the Spanish group within the project NERIS to grow the stakeholder involvement in the preparedness to emergency response and recovery is presented.

Interconexión monolítica de dispositivos fotovoltaicos basados en a-Si mediante ablación directa con fuentes láser ultravioleta

Resumen En la última década la tecnología láser se ha convertido en una herramienta imprescindible en la fabricación de dispositivos fotovoltaicos, muy especial¬mente en aquellos basados en tecnología de lámina delgada. Independiente¬mente de crisis coyunturales en el sector, la evolución en los próximos años de estas tecnologías seguirá aprovechándose de la flexibilidad y calidad de proceso de la herramienta láser para la consecución de los dos objetivos básicos que harán de la fotovoltaica una opción energética económicamente viable: la reducción de costes de fabricación y el aumento de eficiencia de los dispositivos. Dentro de las tecnologías fotovoltaicas de lámina delgada, la tecnología de dispositivos basados en silicio amorfo ha tenido un gran desarrollo en sistemas estándar en configuración de superestrato, pero su limitada efi¬ciencia hace que su supervivencia futura pase por el desarrollo de formatos en configuración de substrato sobre materiales flexibles de bajo coste. En esta aproximación, las soluciones industriales basadas en láser actualmente disponibles para la interconexión monolítica de dispositivos no son aplica¬bles, y desde hace años se viene investigando en la búsqueda de soluciones apropiadas para el desarrollo de dichos procesos de interconexión de forma que sean transferibles a la industria. En este contexto, esta Tesis propone una aproximación completamente orig¬inal, demostrando la posibilidad de ejecutar una interconexión completa de estos dispositivos irradiando por el lado de la lámina (es decir de forma com¬patible con la opción de configuración de substrato y, valga la redundancia, con el substrato del dispositivo opaco), y con fuentes láser emitiendo en UV. Este resultado, obtenido por primera vez a nivel internacional con este trabajo, aporta un conocimiento revelador del verdadero potencial de estas fuentes en el desarrollo industrial futuro de estas tecnologías. Si bien muy posiblemente la solución industrial final requiera de una solución mixta con el empleo de fuentes en UV y, posiblemente, en otras longitudes de onda, esta Tesis y su planteamiento novedoso aportan un conocimiento de gran valor a la comunidad internacional por la originalidad del planteamiento seguido, los resultados parciales encontrados en su desarrollo (un número importante de los cuales han aparecido en revistas del JCR que recogen en la actualidad un número muy significativo de citas) y porque saca además a la luz, con las consideraciones físicas pertinentes, las limitaciones intrínsecas que el desarrollo de procesos de ablación directa selectiva con láseres UV en parte de los materiales utilizados presenta en el rango temporal de in¬teracción de ns y ps. En este trabajo se han desarrollado y optimizado los tres pasos estándar de interconexión (los habitualmente denominados Pl, P2 y P3 en la industria fotovoltaica) demostrando las ventajas y limitaciones del uso de fuentes en UV tanto con ancho temporal de ns como de ps. En particular destaca, por el éxito en los resultados obtenidos, el estudio de procesos de ablación selectiva de óxidos conductores transparentes (en este trabajo utilizados tanto como contacto frontal así como posterior en los módulos) que ha generado resultados, de excelente acogida científica a nivel internacional, cuya aplicación trasciende el ámbito de las tecnologías de silicio amorfo en lámina delgada. Además en este trabajo de Tesis, en el desarrollo del objetivo citado, se han puesto a punto técnicas de análisis de los procesos láser, basadas en métodos avanzados de caracterización de materiales (como el uso combi¬nado de la espectroscopia dispersiva de rayos X y la microscopía confocal de barrido) que se presentan como auténticos avances en el desarrollo de técnicas específicas de caracterización para el estudio de los procesos con láser de ablación selectiva de materiales en lámina delgada, procesos que no solo tienen impacto en el ámbito de la fotovoltaica, sino también en la microelectrónica, la biotecnología, la microfabricación, etc. Como resultado adicional, parte de los resultados de este trabajo, han sido aplicados exi¬tosamente por el grupo de investigaci´on en la que la autora desarrolla su labor para conseguir desarrollar procesos de enorme inter´es en otras tec-nolog´ıas fotovoltaicas, como las tecnolog´ıas est´andar de silicio amorfo sobre vidrio en configuraci´on de superestrato o el procesado de capas delgadas en tecnolog´ıas convencionales de silicio cristalino. Por u´ltimo decir que este trabajo ha sido posible por una colaboraci´on muy estrecha entre el Centro L´aser de la UPM, en el que la autora de¬sarrolla su labor, y el Grupo de Silicio Depositado del Centro de Inves¬tigaciones Energ´eticas, Medioambientales y Tecnol´ogicas, CIEMAT, que, junto al Grupo de Energ´ıa Fotovoltaica de la Universidad de Barcelona, han preparado la mayor parte de las muestras utilizadas en este estudio. Dichas colaboraciones se han desarrollado en el marco de varios proyectos de investigaci´on aplicada con subvenci´on pu´blica, tales como el proyecto singular estrat´egico PSE-MICROSIL08 (PSE-120000-2006-6), el proyecto INNDISOL (IPT-420000-2010-6), ambos financiados porel Fondo Europeo de Desarrollo Regional FEDER (UE) ”Una manera de hacer Europa y el MICINN, y los proyectos de Plan Nacional AMIC (ENE2010-21384-C04-´ 02) y CLASICO (ENE2007-6772-C04-04), cuya financiaci´on ha permitido en gran parte llevar a t´ermino este trabajo Abstract In the last decade, the laser technology has turned into an indispensable tool in the production of photovoltaic devices, especially of those based on thin film technology. Regardless the current crisis in the sector, the evolution of these technologies in the upcoming years will keep taking advantage of the flexibility and process quality of the laser tool for the accomplishment of the two basic goals that will convert the photovoltaic energy into economically viable: the manufacture cost reduction and the increase in the efficiency of the devices. Amongst the thin film laser technologies, the technology of devices based on amorphous silicon has had a great development in standard systems of superstrate configuration, but its limited efficiency makes its survival de¬pendant on the development of formats in substrate configuration with low cost flexible materials. In this approach, the laser industrial solutions cur¬rently available for the monolithic interconnection are not applicable, and in the last few years the investigations have been focused on the search of appropriate solutions for the development of such interconnection processes in a way that the same are transferable to the industry. In this context, this Thesis proposes a totally original approach, proving the possibility of executing a full interconnection of these devices by means of irradiation from the film side, i.e., compatible with the substrate con¬figuration, and with UV laser sources. This result, obtained for the first time at international level in this work, provides a revealing knowledge of the true potential of these sources in the future industrial development of these technologies. Even though very probably the final industrial solution will require a combination of the use of UV sources along with other wave¬lengths, this Thesis and its novel approach contribute with a high value to the international community because of the originality of the approach, the partial results found throughout its development (out of which, a large number has appeared in JCR journals that currently accumulate a signifi¬cant number of citations) and brings to light, with the pertinent scientific considerations, the intrinsic limitations that the selective direct ablation processes with UV laser present in the temporal range of interaction of ns and ps for part of the materials used in this study. More particularly, the three standard steps of interconnection (usually de¬nominated P1, P2 and P3 in the photovoltaic industry) have been developed and optimized, showing the advantages as well as the limitations of the use of UV sources in both the ns and ps pulse-width ranges. It is highly remark¬able, because of the success in the obtained results, the study of selective ablation processes in transparent conductive oxide (in this work used as a front and back contact), that has generated results, of excellent interna¬tional scientific reception, whose applications go beyond the scope of thin film photovoltaic technologies based on amorphous silicon. Moreover, in this Thesis, with the development of the mentioned goal, differ¬ent techniques of analysis of laser processes have been fine-tuned, basing the same in advanced methods for material characterization (like the combined use of EDX Analysis and Confocal Laser Scanning Microscopy) that can be presented as true breakthroughs in the development of specific techniques for characterization in the study of laser processes of selective ablation of materials in thin film technologies, processes that not only have impact in the photovoltaic field, but also in those of microelectronics, biotechnology, micro-fabrication, etc. As an additional outcome, part of the results of this work has been suc¬cessfully applied, by the investigation group to which the author belongs, to the development of processes of enormous interest within other photo¬voltaic technologies, such as the standard technologies on amorphous silicon over glass in superstrate configuration or the processing of thin layers in conventional technologies using crystalline silicon. Lastly, it is important to mention that this work has been possible thanks to the close cooperation between the Centro L´aser of the UPM, in which the author develops her work, and the Grupo de Silicio Depositado of Centro de Investigaciones Energ´eticas, Medioambientales y Tecnol´ogicas, CIEMAT, which, along with the Grupo de Energ´ıa Fotovoltaica of Univer¬sidad de Barcelona, has prepared the largest part of the samples utilized in this study. Such collaborations have been carried out in the context of several projects of applied investigation with public funding, like Proyecto Singular Estrat´egico PSE-MICROSIL08 (PSE-120000-2006-6), Proyecto IN-NDISOL (IPT-420000-2010-6), both funded by the European Regional De¬velopment Fund (ERDF), ”Una manera de hacer Europa” and MICINN, and the projects of Plan Nacional AMIC (ENE2010-21384-C04-02) and ´ CLASICO (ENE2007-6772-C04-04), whose funds have enabled the devel-opment of large part of this work.

Expectations from EMET and OESEE ground listening of possible EM events generated by the TSS 1R

On 22nd February '96, the space mission STS 75 started ,from the NASA facilities at Cape Canaveral. Such a mission consists in the launch of the shuttle Columbia in order to carry out two experiments in the space: the TSS 1R (Tethered Satellite Sistem 1 Refliight) and the USMP (United States Microgravity Payload). The TSS 1R is a replica of a similar mission TSS 1 '92. The TSS space programme is a bilateral scientific cooperation between the USA space agency NASA (National Aeronautics and Space Agency) and the ASI (Italian Space Agency. The TSS 1R system consists on the shuttle Columbia which deploys, up-ward, by means a conducting tether 20 km long, a spherical satellite (1.5 mt diameter) containing scientific instrumentation. This system, orbiting at about 300 km from the Earth's surface, represents, presently, the largest experimental space structure, Due to its dimensions, flexibility and conducting properties of the tether, the system interacts, in a quite complex manner, wih the earth magnetic field and the ionospheric plasma, in a way that the total system behaves as an electromagnetic radiating antenna as well as an electric power generator. Twelve scientific experiments have been assessed by US and Italian scientists in order to study the electro dynamic behaviour of the structure orbiting in the ionos phere. Two experiments have been prepared in the attempt to receive on the Earth's surface possible electromagnetic events radiated by the TSS 1R. The project EMET (Electro Magnetic Emissions from Tether),USA and the project OESEE (Observations on the Earth Surface of Electromagnetic Emissions) Italy, consist in a coordinated programme of passive detection of such possible EM emissions. This detection will supply the verification of some thoretical hypotheses on the electrodynamic interactions between the orbiting system, the Earth's magnetic field and the ionospheric plasma with two principal aims as the technological assesment of the system concept as well as a deeper knowledge of the ionosphere properties for future space applications. A theoretical model that keeps the peculiarities of tether emissionsis being developed for signal prediction at constant tether current. As a step previous to the calculation of the expected ground signal , the Alfven-wave signature left by the tether far back in the ionosphere has been determined. The scientific expectations from the combined effort to measure the entity of those perturbations will be outlined taking in to account the used ground track sensor systems.

Space demostration of bare electrodynamic tape-tether technology on the sounding rocket S520-25

A spaceflight validation of bare electro dynamic tape tether technology was conducted. A S520-25 sounding rocket was launched successfully at 05:00am on 31 August 2010 and successfully deployed 132.6m of tape tether over 120 seconds in a ballistic flight. The electrodynamic performance of the bare tape tether employed as an atmospheric probe was measured. Flight results are introduced through the present progressive report of the demonstration and the results of flight experiment are examined as the premier report of the international cooperation between Japan, Europe, USA and Australia. Future plans for maturing space tether technology, which will play an important role for future space activities, are also discussed.

Learning from incidents during bridge erection

Bridge building is a highly uncertain endeavour that entails considerable risk, as attested to by the succession of construction-related incidents and accidents recently reported in Spain and elsewhere. While efforts are being made to improve on-site safety, many issues are still outstanding, such as the establishment of reliability requirements for the ancillary systems used. The problems that must be dealt with in everyday practice, however, are more elementary and often attributable to human error. The overall organisation of the use of bridge construction equipment is in need of improvement. Close cooperation between the bridge engineers responsible for construction planning and ancillary element suppliers is imperative, for flawed interaction between building equipment and the bridge under construction may generate structural vulnerability. External quality assurance should likewise be mandatory

Evaluación de la distribución de riesgos en los distintos modelos de asociación público-privada para la provisión de infraestructura carretera en México

México es de los pocos países en el mundo que ha realizado dos grandes programas para la construcción de autopistas en colaboración con el sector privado. El primero, fue realizado entre 1989 y 1994, con resultados adversos por el mal diseño del esquema de concesiones; y, el segundo con mejores resultados, en operación desde 2003 mediante nuevos modelos de asociación público-privada (APP). El objetivo de la presente investigación es estudiar los modelos de asociación público-privada empleados en México para la provisión de infraestructura carretera, realizando el análisis y la evaluación de la distribución de riesgos entre el sector público y privado en cada uno de los modelos con el propósito de establecer una propuesta de reasignación de riesgos para disminuir el costo global y la incertidumbre de los proyectos. En la primera parte se describe el estado actual del conocimiento de las asociaciones público-privadas para desarrollar proyectos de infraestructura, incluyendo los antecedentes, la definición y las tipologías de los esquemas APP, así como la práctica internacional de programas como el modelo británico Private Finance Initiative (PFI), resultados de proyectos en la Unión Europea y programas APP en otros países. También, se destaca la participación del sector privado en el financiamiento de la infraestructura del transporte de México en la década de 1990. En los capítulos centrales se aborda el estudio de los modelos APP que se han utilizado en el país en la construcción de la red de carreteras de alta capacidad. Se presentan las características y los resultados del programa de autopistas 1989-94, así como el rescate financiero y las medidas de reestructuración de los proyectos concesionados, aspectos que obligaron a las autoridades mexicanas a cambiar la normatividad para la aprobación de los proyectos según su rentabilidad, modificar la legislación de caminos y diseñar nuevos esquemas de colaboración entre el gobierno y el sector privado. Los nuevos modelos APP vigentes desde 2003 son: nuevo modelo de concesiones para desarrollar autopistas de peaje, modelo de proyectos de prestación de servicios (peaje sombra) para modernizar carreteras existentes y modelo de aprovechamiento de activos para concesionar autopistas de peaje en operación a cambio de un pago. De estos modelos se realizaron estudios de caso en los que se determinan medidas de desempeño operativo (niveles de tráfico, costos y plazos de construcción) y rentabilidad financiera (tasa interna de retorno y valor presente neto). En la última parte se efectúa la identificación, análisis y evaluación de los riesgos que afectaron los costos, el tiempo de ejecución y la rentabilidad de los proyectos de ambos programas. Entre los factores de riesgo analizados se encontró que los más importantes fueron: las condiciones macroeconómicas del país (inflación, producto interno bruto, tipo de cambio y tasa de interés), deficiencias en la planificación de los proyectos (diseño, derecho de vía, tarifas, permisos y estimación del tránsito) y aportaciones públicas en forma de obra. Mexico is one of the few countries in the world that has developed two major programs for highway construction in collaboration with the private sector. The first one was carried out between 1989 and 1994 with adverse outcomes due to the wrong design of concession schemes; and, the second one, in operation since 2003, through new public-private partnership models (PPPs). The objective of this research is to study public-private partnership models used in Mexico for road infrastructure provision, performing the analysis and evaluation of risk’s distribution between the public and the private sector in each model in order to draw up a proposal for risk’s allocation to reduce the total cost and the uncertainty of projects. The first part describes the current state of knowledge in public-private partnership to develop infrastructure projects, including the history, definition and types of PPP models, as well as international practice of programs such as the British Private Finance Initiative (PFI) model, results in the European Union and PPP programs in other countries. Also, it stands out the private sector participation in financing of Mexico’s transport infrastructure in 1990s. The next chapters present the study of public-private partnerships models that have been used in the country in the construction of the high capacity road network. Characteristics and outcomes of the highway program 1989-94 are presented, as well as the financial bailout and restructuring measures of the concession projects, aspects that forced the Mexican authorities to change projects regulations, improve road’s legislation and design new schemes of cooperation between the Government and the private sector. The new PPP models since 2003 are: concession model to develop toll highways, private service contracts model (shadow toll) to modernize existing roads and highway assets model for the concession of toll roads in operation in exchange for a payment. These models were analyzed using case studies in which measures of operational performance (levels of traffic, costs and construction schedules) and financial profitability (internal rate of return and net present value) are determined. In the last part, the analysis and assessment of risks that affect costs, execution time and profitability of the projects are carried out, for both programs. Among the risk factors analyzed, the following ones were found to be the most important: country macroeconomic conditions (inflation, gross domestic product, exchange rate and interest rate), deficiencies in projects planning (design, right of way, tolls, permits and traffic estimation) and public contributions in the form of construction works.

La Ordenación del Territorio en las Ciudades Globales Europeas: El caso de Madrid

En la Comunidad de Madrid el modelo de ocupación del territorio en las dos últimas décadas ha obedecido a factores de oferta del mercado y no a las necesidades de la población, ello provoca un consumo de suelo y de recursos que conducen a una sobrexplotación insostenible. Las metrópolis globales están experimentando rápidas e intensas transformaciones, basadas en los paradigmas emergentes de la globalización, la gobernanza, la metropolizacion y la dispersión de las actividades en el territorio y a través de ellos se abordan los planes de Londres, París y las tentativas de Madrid. La globalización provoca la pérdida de soberanía de las administraciones publicas y la competitividad entre las ciudades globales en Europa, Londres, Paris y Madrid, son centros de poder, de concentración y crecimiento donde se produce la dualización del espacio y donde la desigualdad participa de la restructuración urbana, concentración de pobreza frente a espacios de la nueva clase emergente en donde dominan los sectores de servicios y las tecnologías de la información. Frente al desarrollo urbano neoliberal de regulación a través del mercado y basada en criterios de eficiencia de la Nueva Gestión Pública, se vislumbra la posibilidad de que la sociedad se administre a si misma por medio de acciones voluntarias y responsables que promuevan los intereses colectivos mediante el reconocimiento de su propia identidad, introduciendo el concepto de gobernanza. Frente, a la explotación del territorio por parte de la sociedad extractiva que genera corrupcion, se propone un modelo de cooperación público-privada basado en la confianza mutua, un marco regulador estable, la transparencia y la información a cuyo flujo más homogéneo contribuirán sin duda las TICs. En todo este proceso, las regiones metropolitanas en Europa se erigen como motores del crecimiento, donde los límites administrativos son superados, en un territorio cada vez más extendido y donde los gobiernos locales tienen que organizarse mediante un proceso de cooperación en la provisión de servicios que ayuden a evitar los desequilibrios territoriales. El fenómeno de la dispersión urbana en desarrollos de baja densidad, los centros comerciales periféricos, la expulsión hacia la periferia de las actividades de menor valor añadido y la concentración de funciones directivas en el centro, conducen a una fragmentación del territorio en islas dependientes del automóvil y a procesos de exclusión social por la huida de las rentas altas y la expulsión de las rentas bajas de los centros urbanos. Se crean fragmentos monofuncionales y discontinuos, apoyados en las autovías, lugares carentes de identidad y generadores de despilfarro de recursos y una falta de sostenibilidad ambiental, económica y social. El estudio de la cultura de la planificación en Europa ayuda a comprender los diferentes enfoques en la ordenación del territorio y el proceso de convergencia entre las diferentes regiones. Los documentos de la UE se basan en la necesidad de la competitividad para el crecimiento europeo y la cohesión social y en relación al territorio en los desarrollos policéntricos, la resolución del dualismo campo-ciudad, el acceso equilibrado a las infraestructuras, la gestión prudente de la naturaleza, el patrimonio y el fomento de la identidad. Se proponen dos niveles de estudio uno actual, los últimos planes de Londres y Paris y el otro la evolución de las tentativas de planes en la Región madrileña siempre en relación a los paradigmas emergentes señalados y su reflejo en los documentos. El Plan de Londres es estratégico, con una visión a largo plazo, donde se confiere un gran interés al proceso, al papel del alcalde como líder y su adaptación a las circunstancias cambiantes, sujeto a las incertidumbres de una ciudad global. El desarrollo del mismo se concibe a través de la colaboración y cooperación entre las administraciones y actores. La estructura del documento es flexible, establece orientaciones y guías indicativas, para la redacción de los planes locales, no siendo las mismas vinculantes y con escasa representación grafica. El Plan de París es más un plan físico, similar al de otros centros europeos, trabaja sobre los sectores y sobre los territorios, con información extensa, con características de “Plan Latino” por la fuerza de la expresión gráfica, pero al mismo tiempo contiene una visión estratégica. Es vinculante en sus determinaciones y normativas, se plantea fomentar, pero también prohibir. Ambos planes tratan la competitividad internacional de sus centros urbanos, la igualdad social, la inclusión de todos los grupos sociales y la vivienda como una cuestión de dignidad humana. Londres plantea la gobernanza como cooperación entre sector público-privado y la necesaria cooperación con las regiones limítrofes, en París las relaciones están más institucionalizadas resaltando la colaboración vertical entre administraciones. Ambos plantean la densificación de nodos servidos por transporte público, modos blandos y el uso los TODs y la preservación de la infraestructura verde jerarquizada, la potenciación de la red azul y la mejora del paisaje de las periferias. En las “tentativas” de planes territoriales de Madrid se constata que estuvieron sujetas a los ciclos económicos. El primer Documento las DOT del año 1984, no planteaba crecimiento, ni económico ni demográfico, a medio plazo y por ello no proponía una modificación del modelo radio concéntrico. Se trataba de un Plan rígido volcado en la recuperación del medio rural, de la ciudad, el dimensionamiento de los crecimientos en función de las dotaciones e infraestructuras existentes. Aboga por la intervención de la administración pública y la promoción del pequeño comercio. Destaca el desequilibrio social en función de la renta, la marginación de determinados grupos sociales, el desequilibrio residencia/empleo y la excesiva densidad. Incide en la necesidad de viviendas para los más desfavorecidos mediante el alquiler, la promoción suelo público y la promoción del ferrocarril para dar accesibilidad al espacio central. Aboga por el equipamiento de proximidad y de pequeño tamaño, el tratamiento paisajístico de los límites urbanos de los núcleos y el control de las actividades ilegales señalando orientaciones para el planeamiento urbano. Las Estrategias (1989) contienen una visión: la modificación del modelo territorial, mediante la intervención pública a través de proyectos. Plantea la reestructuración económica del territorio, la reconversión del aparato productivo, la deslocalización de actividades de escaso valor añadido y una mayor ubicuidad de la actividad económica. Incide en la difusión de la centralidad hacia el territorio del sur, equilibrándolo con el norte, tratando de recomponer empleo y residencia, integrando al desarrollo económico las periferias entre sí y con el centro. Las actuaciones de transporte consolidarían las actuaciones, modificando el modelo radio concéntrico facilitando la movilidad mediante la red de cercanías y la intermodalidad. El plan se basaba en el liderazgo del Consejero, no integrando sectores como el medio ambiente, ni estableciendo un documento de seguimiento de las actuaciones que evaluara los efectos de las políticas y su aportación al equilibrio territorial, a través de los proyectos realizados. El Documento Preparatorio de las Bases (1995), es más de un compendio o plan de planes, recoge análisis y propuestas de los documentos anteriores y de planes sectoriales de otros departamentos. Presenta una doble estructura: un plan físico integrador clásico, que abarca los sectores y territorios, y recoge las Estrategias previas añadiendo puntos fuertes, como el malestar urbano y la rehabilitación el centro. Plantea la consecución del equilibrio ambiental mediante el crecimiento de las ciudades existentes, la vertebración territorial basada en la movilidad y en la potenciación de nuevas centralidades, la mejora de la habitabilidad y rehabilitación integral del Centro Urbano de Madrid, y la modernización del tejido productivo existente. No existe una idea-fuerza que aglutine todo el documento, parte del reconocimiento de un modelo existente concentrado y congestivo, un centro urbano dual y dos periferias al este y sur con un declive urbano y obsolescencia productiva y al oeste y norte con una dispersión que amenaza al equilibrio medioambiental. Señala como aspectos relevantes, la creciente polarización y segregación social, la deslocalización industrial, la aparición de las actividades de servicios a las empresas instaladas en las áreas metropolitanas, y la dispersión de las actividades económicas en el territorio por la banalización del uso del automóvil. Se plantea el reto de hacer ciudad de la extensión suburbana y su conexión con el sistema metropolitano, mediante una red de ciudades integrada y complementaria, en búsqueda de un mayor equilibrio y solidaridad territorial. Las Bases del PRET (1997) tenían como propósito iniciar el proceso de concertación en que debe basarse la elaboración del Plan. Parte de la ciudad mediterránea compacta, y diversa, y de la necesidad de que las actividades económicas, los servicios y la residencia estén en proximidad, resolviéndolo mediante una potente red de transporte público que permitiese una accesibilidad integrada al territorio. El flujo de residencia hacia la periferia, con un modelo ajeno de vivienda unifamiliar y la concentración del empleo en el centro producen desequilibrio territorial. Madrid manifiesta siempre apostó por la densificación del espacio central urbanizado, produciendo su congestión, frente al desarrollo de nuevos suelos que permitieran su expansión territorial. Precisa que es necesario preservar los valores de centralidad de Madrid, como generador de riqueza, canalizando toda aquella demanda de centralidad, hacia espacios más periféricos. El problema de la vivienda no lo ve solo como social, sino como económico, debido a la pérdida de empleos que supone su paralización. Observa ya los crecimientos residenciales en el borde de la region por el menor valor del suelo. Plantea como la política de oferta ha dado lugar a un modelo de crecimiento fragmentado, desequilibrado, desestructurado, con fuertes déficits dotacionales y de equipamiento, que inciden en la segregación espacial de las rentas, agravando el proceso de falta de identidad morfológica y de desarraigo de los valores urbanos. El plan señalaba que la presión sobre el territorio creaba su densificación por las limitaciones de espacio, Incidía en limitar el peso de la intervención pública, no planteando propuestas de cooperación público-privado. La mayor incoherencia estriba en que los objetivos eran innovadores y coinciden en su mayoría con las propuestas estudiadas de Londres o Paris, pero se intentan implementar a través de un cambio hacia un modelo reticulado homogéneo, expansivo sobre el territorio, que supone un consumo de suelo y de infraestructuras para solucionar un problema inexistente, la gestión de la densidad. Durante las dos últimas décadas en ausencia de un plan regional, la postura neoliberal fue la de un exclusivo control de legalidad del planeamiento, los municipios entraron en un proceso de competencia para aprovechar las iniciales ventajas económicas de los crecimientos detectados, que proporcionaban una base económica “sólida” a unos municipios con escasos recursos en sus presupuestos municipales. La legislación se modifica a requerimiento de grupos interesados, no existiendo un marco estable. Se pierde la figura del plan no solo a nivel regional, si no en los sectores y el planeamiento municipal donde los municipios tiende a basarse en modificaciones puntuales con la subsiguiente pérdida del modelo urbanístico. La protección ambiental se estructura mediante un extenso nivel de figuras, con diversidad de competencias que impide su efectiva protección y control. Este proceso produce un despilfarro en la ocupación del suelo, apoyada en las infraestructuras viarias, y un crecimiento disperso y de baja densidad, cada vez más periférico, produciéndose una segmentación social por dualización del espacio en función de niveles de renta. Al amparo del boom inmobiliario, se produce una falta de política social de vivienda pública, más basada en la dinamización del mercado con producción de viviendas para rentas medias que en políticas de alquiler para determinados grupos concentrándose estas en los barrios desfavorecidos y en la periferia sur. Se produce un incremento de la vivienda unifamiliar, muchas veces amparada en políticas públicas, la misma se localiza en el oeste principalmente, en espacios de valor como el entorno del Guadarrama o con viviendas más baratas por la popularización de la tipología en la frontera de la Región. El territorio se especializa a modo de islas monofuncionales, las actividades financieras y de servicios avanzados a las empresas se localizan en el norte y oeste próximo, se pierde actividad industrial que se dispersa más al sur, muchas veces fuera de la región. Se incrementan los grandes centros comerciales colgados de las autovías y sin población en su entorno. Todo este proceso ha provocado una pérdida de utilización del transporte público y un aumento significativo del uso del vehículo privado. En la dos últimas décadas se ha producido en la región de Madrid desequilibrio territorial y segmentación social, falta de implicación de la sociedad en el territorio, dispersión del crecimiento y un incremento de los costes ambientales, sociales y económicos, situación, que solo, a través del uso racional del territorio se puede reconducir, apoyado en una planificación integrada sensible y participativa. ABSTRACT In Madrid the model of land occupation in the past two decades has been driven by market supply factors rather than the needs of the population. This results in a consumption of land and resources that leads to unsustainable overexploitation. Addressing this issue must be done through sensitive and participatory integrated planning. Global cities are experiencing rapid and intense change based on the emerging paradigms of globalization, governance, metropolization and the dispersion of activities in the territory. Through this context, a closer look will be taken at the London and Paris plans as well as the tentative plans of Madrid. Globalization causes the loss of state sovereignty and the competitiveness among global cities in Europe; London, Paris and Madrid. These are centres of power, concentration and growth where the duality of space is produced, and where inequality plays a part in urban restructuration. There are concentrated areas of poverty versus areas with a new emerging class where the services sector and information technologies are dominant. The introduction of ICTs contributes to a more homogeneous flow of information leading, us to the concept of governance. Against neoliberal urban development based on free market regulations and efficiency criteria as established by the “New Public Management”, emerge new ways where society administers itself through voluntary and responsible actions to promote collective interests by recognizing their own identity. A new model of public-private partnerships surfaces that is based on mutual trust, transparency, information and a stable regulatory framework in light of territorial exploitation by the “extractive society” that generates corruption. Throughout this process, European metropolitan regions become motors of growth where administrative boundaries are overcome in an ever expanding territory where government is organized through cooperative processes to provide services that protect against regional imbalances. Urban sprawl or low-density development as seen in peripheral shopping centres, the off-shoring of low added-value activities to the periphery, and the concentration of business and top management functions in the centre, leads to a fragmentation of the territory in automobile dependent islands and a process of social exclusion brought on by the disappearance of high incomes. Another effect is the elimination of low income populations from urban centres. In consequence, discontinuous expansions and mono-functional places that lack identity materialize supported by a highway network and high resource consumption. Studying the culture of urban planning in Europe provides better insight into different approaches to spatial planning and the process of convergence between different regions. EU documents are based on the need of competitiveness for European growth and social cohesion. In relation to polycentric development territory they are based on a necessity to solve the dualism between field and city, balanced access to infrastructures, prudent management of nature and solidifying heritage and identity Two levels of study unfold, the first being the current plans of London and Île-de-France and the second being the evolution of tentative plans for the Madrid region as related to emerging paradigms and how this is reflected in documents. The London Plan is strategic with a long-term vision that focuses on operation, the role of the mayor as a pivotal leader, and the adaptability to changing circumstances brought on by the uncertainties of a global city. Its development is conceived through collaboration and cooperation between governments and stakeholders. The document structure is flexible, providing guidance and indicative guidelines on how to draft local plans so they are not binding, and it contains scarce graphic representation. The Plan of Paris takes on a more physical form and is similar to plans of other European centres. It emphasizes sectors and territories, using extensive information, and is more characteristic of a “Latin Plan” as seen in its detailed graphic expression. However, it also contains a strategic vision. Binding in its determinations and policy, it proposes advancement but also prohibition. Both plans address the international competitiveness of urban centres, social equality, inclusion of all social groups and housing as issues of human dignity. London raises governance and cooperation between public and private sector and the need for cooperation with neighbouring regions. In Paris, the relations are more institutionalized highlighting vertical collaboration between administrations. Both propose nodes of densification served by public transportation, soft modes and the use of TOD, the preservation of a hierarchical green infrastructure, and enhancing the landscape in urban peripheries. The tentative territorial plans for the Madrid region provide evidence that they were subject to economic cycles. The first document of master guidelines (1984) does not address either economic or demographic growth in the mid term and therefore does not propose the modification of the radio-concentric model. It is a rigid plan focused on rural and urban recovery and the dimensioning of growth that depends on endowments and infrastructures. It advocates government intervention and promotes small business. The plan emphasizes social imbalance in terms of income, marginalization of certain social groups, the imbalance of residence/employment and excessive density. It stresses the need for social rent housing for the underprivileged, promotes public land, and the supports rail accessibility to the central area. It backs facilities of proximity and small size, enhancing the landscaping of city borders, controlling illegal activities and draws out guidelines for urban planning. The strategies (1989) contain a vision: Changing the territorial model through public intervention by means of projects. They bring to light economic restructuring of territory, the reconversion of the productive apparatus, relocation of low value-added activities, and greater ubiquity of economic activity. They also propose the diffusion of centrality towards southern territories, balancing it with the north in an attempt to reset employment and residence that integrates peripheral economic development both in the periphery and the centre. Transport would consolidate the project, changing the radius-concentric model and facilitating mobility through a commuter and inter-modality network. The plan derives itself from the leadership of the minister and does not integrate sectors such as environment. It also does not incorporate the existence of a written document that monitors performance to evaluate the effects of policies and their contribution to the territorial balance. The Preparatory Document of the Bases, (1995) is more a compendium, or plan of plans, that compiles analysis and proposals from previous documents and sectorial plans from other departments. It has a dual structure: An integrating physical plan covering the sectors and territories that includes the previous strategies while adding some strengths. One such point is the urban discomfort and the rehabilitation of the centre. It also poses the achievement of environmental balance through the growth of existing cities, the territorial linking based on mobility, strengthening new centres, improving the liveability and comprehensive rehabilitation of downtown Madrid, and the modernization of the existing production network. There is no one powerful idea that binds this document. This is due to the recognition of an existing concentrate and congestive model, a dual urban centre, two eastern and southern suburbs suffering from urban decay, and an obsolescent productive north and west whose dispersion threatens the environmental balance. Relevant aspects the document highlights are increasing polarization and social segregation, industrial relocation, the emergence of service activities to centralized companies in metropolitan areas and the dispersion of economic activities in the territory by the trivialization of car use. It proposes making the city from the suburban sprawl and its connection to the metropolitan system through a network of integrated and complementary cities in search of a better balance and territorial solidarity. The Bases of PRET (1997) aims to start the consultation process that must underpin the development of the plan. It stems from a compact and diverse Mediterranean city along with the need for economic activities, services and residences that are close. To resolve the issue, it presents a powerful network of public transport that allows integrated accessibility to the territory. The flow of residence to the periphery based on a foreign model of detached housing and an employment concentration in the centre produces territorial imbalance. Madrid always opted for the densification of the central space, producing its congestion, against the development of new land that would allow its territorial expansion. The document states that the necessity to preserve the values of the housing problem is not only viewed as social, but also economic due to the loss of jobs resulting from their paralysis. It notes the residential growth in the regional border due to the low price of land and argues that the policy of supply has led to a fragmented model of growth that is unbalanced, unstructured, with strong infrastructure and facility deficits that affect the spatial segregation of income and aggravate the lack of morphological identity, uprooting urban values. The pressure on the territory caused its densification due to space limitation; the proposed grid model causes land consumption and infrastructure to solve a non-problem, density. Focusing on limiting the weight of public intervention, it does not raise proposals for public-private cooperation. The biggest discrepancy is that the targets were innovative and mostly align with the proposals in London and Paris. However, it proposes to be implemented through a shift towards a uniform gridded model that is expansive over territory. During the last two decades, due to the absence of a regional plan, a neoliberal stance held exclusive control of the legality of urban planning. The municipalities entered a competition process to take advantage of initial economic benefits of such growth. This provided a “solid” economic base for some municipalities with limited resources in their municipal budgets. The law was amended without a legal stable framework at the request of stakeholders. The character of the plan is lost not only regionally, but also in the sectors and municipal planning. This tends to be based on specific changes with the loss of an urban model. Environmental protection is organized through an extensive number of protection figures with diverse competencies that prevent its effective protection. This process squanders the use of the land, backed by increasing road infrastructure, dispersed occupations with low-density growth causing a social segmentation due to space duality based on income levels. During the housing boom, there is a reduction in social public housing policy mostly due to a boost in the market of housing production for average incomes than in rental policies for needy social groups that focus on disadvantaged neighbourhoods and southern suburbs. As a result, there is an increase in single-family housing, often protected by public policy. This is located primarily in the west in areas of high environmental value such as Guadarrama. There is also cheaper housing due to the popularization of typology in the border region. There, territory works as a mono-functional islands. Financial activities and advanced services for companies are located to the north and west where industrial activity is lost as it migrates south, often outside the region. The number of large shopping centres hanging off the highway infrastructure with little to no surrounding population increases. This process leads to the loss of dependency on public transport and a significant increase in the use of private vehicles. The absence of regional planning has produced more imbalance, more social segmentation, more dispersed growth and a lot of environmental, social and economic costs that can only be redirected through rational territorial.

Cooperative Task Execution between Modular Robots Based on Tight-Loose Cooperation Strategies

The complexity in the execution of cooperative tasks is high due to the fact that a robot team requires movement coordination at the beginning of the mission and continuous coordination during the execution of the task. A variety of techniques have been proposed to give a solution to this problem assuming standard mobile robots. This work focuses on presenting the execution of a cooperative task by a modular robot team. The complexity of the task execution increases due to the fact that each robot is composed of modules which have to be coordinated in a proper way to successfully work. A combined tight and loose cooperation strategy is presented and a bar-pushing example is used as a cooperative task to show the performance of this type of system.

Integration of cooperation for development in Survey Engineering curricula at the European Higher Education Area (EHEA) framework

Survey Engineering curricula involves the integration of many formal disciplines at a high level of proficiency. The Escuela de Ingenieros en Topografía, Cartografía y Geodesia at Universidad Politécnica de Madrid (Survey Engineering) has developed an intense and deep teaching on so-called Applied Land Sciences and Technologies or Land Engineering. However, new approaches are encouraged by the European Higher Education Area (EHEA). This fact requires a review of traditional teaching and methods. Furthermore, the new globalization and international approach gives new ways to this discipline to teach and learn about how to bridge gap between cultures and regions. This work is based in two main needs. On one hand, it is based on integration of basic knowledge and disciplines involved in typical Survey Engineering within Land Management. On the other, there is an urgent need to consider territory on a social and ethical basis, as far as a part of the society, culture, idiosyncrasy or economy. The integration of appropriate knowledge of the Land Management is typically dominated by civil engineers and urban planners. It would be very possible to integrate Survey Engineering and Cooperation for Development in the framework of Land Management disciplines. Cooperation for Development is a concept that has changed since beginning of its use until now. Development projects leave an impact on society in response to their beneficiaries and are directed towards self-sustainability. Furthermore, it is the true bridge to reduce gap between societies when differences are immeasurable. The concept of development has also been changing and nowadays it is not a purely economic concept. Education, science and technology are increasingly taking a larger role in what is meant by development. Moreover, it is commonly accepted that Universities should transfer knowledge to society, and the transfer of knowledge should be open to countries most in need for developing. If the importance of the country development is given by education, science and technology, knowledge transfer would be one of the most clear of ways of Cooperation for Development. Therefore, university cooperation is one of the most powerful tools to achieve it, placing universities as agents of development. In Spain, the role of universities as agents of development and cooperation has been largely strengthened. All about this work deals to how to implement both Cooperation for Development and Land Management within Survey Engineering at the EHEA framework.

Distributes award protocol: A cooperation and communication method for robots.

In this Master’s Thesis a new Distributed Award Protocol (DAP) for robot communication and cooperation is presented. Task assignment (contract awarding) is done dynamically with contracts assigned to robots based upon the best bid received. Instead of having a manager and a contractor it is proposed a fully distributed bidding/awarding mechanism without a distinguished master. The best bidding robots are awarded with contract for execution. The contractors make decisions locally. This brings the following benefits: no communication bottleneck, low computational power requirement, increased robustness. DAP can handle multitasking. Tasks can be injected into system during the execution of already allocated tasks. As tasks have priorities, in the next cycle after taking into account actual bid parameters of all robots, tasks can be re-allocated. The aim is to minimize a global cost function which is a compromise between cost of task execution and cost of resources usage. Information about tasks and bid values is spread among robots with the use of a Round Robin Route, which is a novel solution proposed in this work. This method allows also identifying failed robots. Such failed robot is eliminated from the list of awarded robots and its replacement is found so the task is still executed by a team. If the failure of a robot was temporary (e.g. communication noise) and the robot can recover, it can again participate in the next bidding/awarding process. Using a bidding/awarding mechanism allows robots to dynamically relocate among tasks. This is also contributes to system robustness. DAP was evaluated through multiple experiments done in the multi-robot simulation system. Various scenarios were tested to check the idea of the main algorithm. Different failures of robots (communication failures, partial hardware malfunctions) were simulated and observations were made regarding how DAP recovers from them. Also the DAP flexibility to environment changes was watched. The experiments in the simulated environment confirmed the above features of DAP.

Service innovation: Inward and outward related activities and cooperation mode

Knowledge of how customers co-create value, the way that suppliers and providers co-produce services, and how research and development centers and universities transfer technologies is becoming increasingly important to scholars' understanding of service innovation. This paper presents an analysis of the relationship between inward and outward innovation activities in service organizations and their modes of innovation, using network innovation premises and an extended innovation model. Empirical data from retail, health and education sector service organizations show the existence of a relationship between the degree of development of the inward innovation process and the degree of development of outward innovation activities. The majority of service organizations have innovation processes with an orientation toward customers and suppliers rather than other service network members, and leading service organizations follow a path that the literature defines as oriented toward the service value network. Findings lead to implications of how innovation managers could develop their internal innovation capacity to balance inward and outward activities properly.

Application of a Bayesian/Generalised Least-Squares method to generate correlations between independent neutron fission yield data

Fission product yields are fundamental parameters for several nuclear engineering calculations and in particular for burn-up/activation problems. The impact of their uncertainties was widely studied in the past and valuations were released, although still incomplete. Recently, the nuclear community expressed the need for full fission yield covariance matrices to produce inventory calculation results that take into account the complete uncertainty data. In this work, we studied and applied a Bayesian/generalised least-squares method for covariance generation, and compared the generated uncertainties to the original data stored in the JEFF-3.1.2 library. Then, we focused on the effect of fission yield covariance information on fission pulse decay heat results for thermal fission of 235U. Calculations were carried out using different codes (ACAB and ALEPH-2) after introducing the new covariance values. Results were compared with those obtained with the uncertainty data currently provided by the library. The uncertainty quantification was performed with the Monte Carlo sampling technique. Indeed, correlations between fission yields strongly affect the statistics of decay heat. Introduction Nowadays, any engineering calculation performed in the nuclear field should be accompanied by an uncertainty analysis. In such an analysis, different sources of uncertainties are taken into account. Works such as those performed under the UAM project (Ivanov, et al., 2013) treat nuclear data as a source of uncertainty, in particular cross-section data for which uncertainties given in the form of covariance matrices are already provided in the major nuclear data libraries. Meanwhile, fission yield uncertainties were often neglected or treated shallowly, because their effects were considered of second order compared to cross-sections (Garcia-Herranz, et al., 2010). However, the Working Party on International Nuclear Data Evaluation Co-operation (WPEC)