Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.

Analysis and Quality Control from ARIMA Modeling

In this paper, we use ARIMA modelling to estimate a set of characteristics of a short-term indicator (for example, the index of industrial production), as trends, seasonal variations, cyclical oscillations, unpredictability, deterministic effects (as a strike), etc. Thus for each sector and product (more than 1000), we construct a vector of values corresponding to the above-mentioned characteristics, that can be used for data editing.

Dust suppressant treatments. Quality control = Tratamientos supresores de polvo. Control de calidad

La emisión de polvo por efecto del viento desde depósitos de residuos mineros o industriales y el paso de vehículos en vías no pavimentadas, es un problema que afecta las actividades productivas; el ambiente y la salud de las personas que permanecen en el área contaminada. En Chile, en los últimos años la sensibilidad social y las exigencias ambientales han aumentado, así como la oferta de diferentes supresores y tecnologías de aplicación. Se han revisado las causas que provocan emisión de polvo y las tecnologías disponibles en Chile para la supresión de polvo, además de las metodologías y normativa para evaluar el desempeño de los materiales tratados con diferentes supresores. En algunos casos no es posible comparar propiedades de desempeño, como durabilidad, dosis a aplicar y frecuencia de las aplicaciones, entre otros aspectos. Los procedimientos descritos en la norma NCh3266-2012 permiten evaluar la erosión eólica en depósitos de residuos, sitios eriazos y caminos no pavimentados, entre otros, junto con evaluar el desempeño de diferentes tipos de supresores de polvo a partir de datos objetivos comparables. Esto permite seleccionar el supresor más adecuado, mejorar la eficiencia de los tratamientos, optimizar los costos y mejorar los procesos productivos. Palabras clave: Erosión-eólica, supresor de polvo, residuos-mineros, caminos-no pavimentados. Dust emissions by wind effect from mining deposits or industrial waste and passing vehicles on unpaved roads, is a problem that affects the productive activities; the environment and the health of those who remain in the contaminated area. The social sensitivity and environmental requirements on this issue in Chile have increased, as well as offering different suppressors and application technologies. Have been reviewed the causes of dust emission and technologies available in Chile for dust suppression, plus methodologies and standards for assessing the performance of the treated materials with different suppressors. In some cases it is not possible to compare performance properties such as durability, application dose and frequency of applications, among others aspects. The procedures described in the NCh 3266-2012 standard allows the assessment of wind erosion in waste deposits, vacant lots and unpaved roads, among others, along with evaluating the performance of different types of dust suppressants from comparable objective data. This allows selecting the most suitable suppressor, improve efficiency of treatments, optimize costs and improve production processes. Keywords: Wind-erosion, dust-suppressor, mining-waste, unpavedroads

Are team personality and climate related to satisfaction and software quality? Aggregating results from a twice replicated experiment

Research into software engineering teams focuses on human and social team factors. Social psychology deals with the study of team formation and has found that personality factors and group processes such as team climate are related to team effectiveness. However, there are only a handful of empirical studies dealing with personality and team climate and their relationship to software development team effectiveness. Objective We present aggregate results of a twice replicated quasi-experiment that evaluates the relationships between personality, team climate, product quality and satisfaction in software development teams. Method Our experimental study measures the personalities of team members based on the Big Five personality traits (openness, conscientiousness, extraversion, agreeableness, neuroticism) and team climate factors (participative safety, support for innovation, team vision and task orientation) preferences and perceptions. We aggregate the results of the three studies through a meta-analysis of correlations. The study was conducted with students. Results The aggregation of results from the baseline experiment and two replications corroborates the following findings. There is a positive relationship between all four climate factors and satisfaction in software development teams. Teams whose members score highest for the agreeableness personality factor have the highest satisfaction levels. The results unveil a significant positive correlation between the extraversion personality factor and software product quality. High participative safety and task orientation climate perceptions are significantly related to quality. Conclusions First, more efficient software development teams can be formed heeding personality factors like agreeableness and extraversion. Second, the team climate generated in software development teams should be monitored for team member satisfaction. Finally, aspects like people feeling safe giving their opinions or encouraging team members to work hard at their job can have an impact on software quality. Software project managers can take advantage of these factors to promote developer satisfaction and improve the resulting product.

Diseño y desarrollo de un robot esférico. Integración electromecánica y programación del software de control.

En este Trabajo Fin de Grado se aborda la concepción, diseño, desarrollo y testeo de un robot esférico. En el se cubre el diseño mecánico y su fabricación, el modelado dinámico y su control, y el diseño hardware y software.

Desarrollo de software de control y medida para goniofotómetro de tipo B

El proyecto trata del desarrollo de un software para realizar el control de la medida de la distribución de intensidad luminosa en luminarias LED. En el trascurso del proyecto se expondrán fundamentos teóricos sobre fotometría básica, de los cuales se extraen las condiciones básicas para realizar dicha medida. Además se realiza una breve descripción del hardware utilizado en el desarrollo de la máquina, el cual se basa en una placa de desarrollo Arduino Mega 2560, que, gracias al paquete de Labview “LIFA” (Labview Interface For Arduino”), será posible utilizarla como tarjeta de adquisición de datos mediante la cual poder manejar tanto sensores como actuadores, para las tareas de control. El instrumento de medida utilizado en este proyecto es el BTS256 de la casa GigaHerzt-Optik, del cual se dispone de un kit de desarrollo tanto en lenguaje C++ como en Labview, haciendo posible programar aplicaciones basadas en este software para realizar cualquier tipo de adaptación a las necesidades del proyecto. El software está desarrollado en la plataforma Labview 2013, esto es gracias a que se dispone del kit de desarrollo del instrumento de medida, y del paquete LIFA. El objetivo global del proyecto es realizar la caracterización de luminarias LED, de forma que se obtengan medidas suficientes de la distribución de intensidad luminosa. Los datos se recogerán en un archivo fotométrico específico, siguiendo la normativa IESNA 2002 sobre formato de archivos fotométricos, que posteriormente será utilizado en la simulación y estudio de instalaciones reales de la luminaria. El sistema propuesto en este proyecto, es un sistema basado en fotometría tipo B, utilizando coordenadas VH, desarrollando un algoritmo de medida que la luminaria describa un ángulo de 180º en ambos ejes, con una resolución de 5º para el eje Vertical y 22.5º para el eje Horizontal, almacenando los datos en un array que será escrito en el formato exigido por la normativa. Una vez obtenidos los datos con el instrumento desarrollado, el fichero generado por la medida, es simulado con el software DIALux, obteniendo unas medidas de iluminación en la simulación que serán comparadas con las medidas reales, intentando reproducir en la simulación las condiciones reales de medida. ABSTRACT. The project involves the development of software for controlling the measurement of light intensity distribution in LEDs. In the course of the project theoretical foundations on basic photometry, of which the basic conditions for such action are extracted will be presented. Besides a brief description of the hardware used in the development of the machine, which is based on a Mega Arduino plate 2560 is made, that through the package Labview "LIFA" (Interface For Arduino Labview "), it is possible to use as data acquisition card by which to handle both sensors and actuators for control tasks. The instrument used in this project is the BTS256 of GigaHerzt-Optik house, which is available a development kit in both C ++ language as LabView, making it possible to program based on this software applications for any kind of adaptation to project needs. The software is developed in Labview 2013 platform, this is thanks to the availability of the SDK of the measuring instrument and the LIFA package. The overall objective of the project is the characterization of LED lights, so that sufficient measures the light intensity distribution are obtained. Data will be collected on a specific photometric file, following the rules IESNA 2002 on photometric format files, which will then be used in the simulation and study of actual installations of the luminaire. The proposed in this project is a system based on photometry type B system using VH coordinates, developing an algorithm as the fixture describe an angle of 180 ° in both axes, with a resolution of 5 ° to the vertical axis and 22.5º for the Horizontal axis, storing data in an array to be written in the format required by the regulations. After obtaining the data with the instrument developed, the file generated by the measure, is simulated with DIALux software, obtaining measures of lighting in the simulation will be compared with the actual measurements, trying to play in the simulation the actual measurement conditions .

A quality assessment system for fresh fruits in hypermarkets and fruit trading centres.

When the fresh fruit reaches the final markets from the suppliers, its quality is not always as good as it should, either because it has been mishandled during transportation or because it lacks an adequate quality control at the producer level, before being shipped. This is why it is necessary for the final markets to establish their own quality assessment system if they want to ensure to their customers the quality they want to sell. In this work, a system to control fruit quality at the last level of the distribution channel has been designed. The system combines rapid control techniques with laboratory equipment and statistical sampling protocols, to obtain a dynamic, objective process, which can substitute advantageously the quality control inspections carried out visually by human experts at the reception platform of most hypermarkets. Portable measuring equipment have been chosen (firmness tester, temperature and humidity sensors...) as well as easy-to-use laboratory equipment (texturometer, colorimeter, refractometer..,) combining them to control the most important fruit quality parameters (firmness, colour, sugars, acids). A complete computer network has been designed to control all the processes and store the collected data in real time, and to perform the computations. The sampling methods have been also defined to guarantee the confidence of the results. Some of the advantages of a quality assessment system as the proposed one are: the minimisation of human subjectivity, the ability to use modern measuring techniques, and the possibility of using it also as a supplier's quality control system. It can be also a way to clarify the quality limits of fruits among members of the commercial channel, as well as the first step in the standardisation of quality control procedures.

Bankable procedures for the technical quality assurance of large scale PV plants

Strict technical quality assurance procedures are essential for PV plant bankability. When large-scale PV plants are concerned, this is typically accomplished in three consecutive phases: an energy yield forecast, that is performed at the beginning of the project and is typically accomplished by means of a simulation exercise performed with dedicated software; a reception test campaign, that is performed at the end of the commissioning and consists of a set of tests for determining the efficiency and the reliability of the PV plant devices; and a performance analysis of the first years of operation, that consists in comparing the real energy production with the one calculated from the recorded operating conditions and taking into account the maintenance records. In the last six years, IES-UPM has offered both indoor and on-site quality control campaigns for more than 60 PV plants, with an accumulated power of more than 300 MW, in close contact with Engineering, Procurement and Construction Contractors and financial entities. This paper presents the lessons learned from such experience.

Integrating Generic Competences into Engineering Curricula

The new degrees in Spanish universities generated as a result of the Bologna process, stress a new dimension: the generic competencies to be acquired by university students (leadership, problem solving, respect for the environment, etc.). At Universidad Polite¿cnica de Madrid a teaching model was defined for two degrees: Graduate in Computer Engineering and Graduate in Software Engineering. Such model incorporates the training, development and assessment of generic competencies planned in these curricula. The aim of this paper is to describe how this model was implemented in both degrees. The model has three components. The first refers to a set of seven activities for introducing mechanisms for training, development and assessment of generic competencies. The second component aims to coordinate actions that implement the competencies across courses (in space and time). The third component consists of a series of activities to perform quality control. The implementation of generic competencies was carried out in first year courses (first and second semesters), together with the planning for second year courses (third and fourth semesters). We managed to involve a high percentage of first-year courses (80%) and the contacts that have been initiated suggest a high percentage in the second year as well.

Técnicas de diseño de pruebas en sistemas embebidos

El software es, cada vez más, una parte muy importante de cualquier circuito electrónico moderno, por ejemplo, un circuito realizado con algún tipo de microprocesador debe incorporar un programa de control por pequeño que sea. Al utilizarse programas informáticos en los circuitos electrónicos modernos, es muy aconsejable, por no decir imprescindible, realizar una serie de pruebas de calidad del diseño realizado. Estas pruebas son cada vez más complicadas de realizar debido al gran tamaño del software empleado en los sistemas actuales, por este motivo, es necesario estructurar una serie de pruebas con el fin de realizar un sistema de calidad, y en algunos casos, un sistema que no presente ningún peligro para el ser humano o el medio ambiente. Esta propuesta consta de la explicación de las técnicas de diseño de pruebas que existen actualmente (por lo menos las más básicas ya que es un tema muy extenso) para realizar el control de calidad del software que puede contener un sistema embebido. Además, muchos circuitos electrónicos, debido a su control o exigencia hardware, es imprescindible que sean manipulados por algún programa que requiera más que un simple microprocesador, me refiero a que se deban controlar por medio de un pequeño programa manipulado por un sistema operativo, ya sea Linux, AIX, Unix, Windows, etc., en este caso el control de calidad se debería llevar a cabo con otras técnicas de diseño. También se puede dar el caso que el circuito electrónico a controlar se deba hacer por medio de una página web. El objetivo es realizar un estudio de las actuales técnicas de diseño de pruebas que están orientadas al desarrollo de sistemas embebidos. ABSTRACT. Software is increasingly a very important part of any modern electronic circuit, for example, a circuit made with some type of microprocessor must incorporate a control program no matter the small it is. When computer programs are used in modern electronic circuits, it is quite advisable if not indispensable to perform a series of quality tests of the design. These tests are becoming more and more difficult to be performed due to the large size of the software used in current systems, which is why it is necessary to structure a series of tests in order to perform a quality system, and in some cases, a system with no danger to humans or to the environment. This proposal consists of an explanation of the techniques used in the tests (at least the most basic ones since it is a very large topic) for quality control of software which may contain an embedded system. In addition, a lot of electronic circuits, due to its control or required hardware, it is essential to be manipulated by a program that requires more than a simple microprocessor, I mean that they must be controlled by means of a small program handled by an operating system, being Linux, AIX, Unix, Windows, etc., in this case the quality control should be carried out with other design techniques. The objective is to study the current test design techniques that are geared to the development of embedded systems. It can also occur that the electronic circuit should be controlled by means of a web page.

Puesta a punto de métodos de análisis de combustibles basados en la espectrometría atómica

El presente proyecto tiene como objeto la puesta a punto de métodos de análisis de combustibles basados en la espectrometría atómica, centrándose en un equipo de absorción atómica que, como su nombre indica, funciona bajo el principio de la absorción atómica y un equipo ICP que trabaja por plasma acoplado inductivamente y que se rige bajo el principio espectrométrico de la emisión atómica. La finalidad de la puesta a punto de ambos métodos es llevar un control de calidad periódico sobre los combustibles. Se pondrán a punto dos métodos normalizados de ensayos, uno bajo la norma UNE EN 16135 para la determinación del contenido de manganeso en gasolinas; otro bajo la norma EN 16576 para determinar el contenido de manganeso y de hierro en gasóleos de automoción. La puesta a punto de ambos métodos tiene un procedimiento asociado que se puede resumir en cuatro pasos: lectura de la norma, creación del método en el software informático con el que trabaja el equipo, calibración del mismo y realización del estudio de exactitud del método. Abstract The aim of this project is to tune up analytical methods based on the principle of the atomic spectrometry, focusing on testing equipment which works under the principle of atomic absorption and Inductively Coupled Plasma (ICP) equipment governed under the principle of atomic emission. The purpose of tuning up both methods is to perform a quality control on fuels. Two different standard methods will be developed: One under the standard UNE EN 16135 for measuring the content of manganese in gasolines; the other one under the standard EN 16576 for the determination of manganese and iron content in middle distillate fuels. Tune up of both methods procedure can be summarized in four steps: Reading the standard, creation of the method on the computer software associated to the equipment, calibration of the equipment and completion of accuracy study.

SemQuaRE - An extension of the SQuaRE quality model for the evaluation of semantic technologies

To correctly evaluate semantic technologies and to obtain results that can be easily integrated, we need to put evaluations under the scope of a unique software quality model. This paper presents SemQuaRE, a quality model for semantic technologies. SemQuaRE is based on the SQuaRE standard and describes a set of quality characteristics specific to semantic technologies and the quality measures that can be used for their measurement. It also provides detailed formulas for the calculation of such measures. The paper shows that SemQuaRE is complete with respect to current evaluation trends and that it has been successfully applied in practice.

Configuración de un entorno de trabajo para el desarrollo de software ágil con integración continua

Hoy en día, existen numerosos sistemas (financieros, fabricación industrial, infraestructura de servicios básicos, etc.) que son dependientes del software. Según la definición de Ingeniería del Software realizada por I. Sommerville, “la Ingeniería del Software es una disciplina de la ingeniería que comprende todos los aspectos de la producción de software desde las etapas iniciales de la especificación del sistema, hasta el mantenimiento de éste después de que se utiliza.” “La ingeniería del software no sólo comprende los procesos técnicos del desarrollo de software, sino también actividades tales como la gestión de proyectos de software y el desarrollo de herramientas, métodos y teorías de apoyo a la producción de software.” Los modelos de proceso de desarrollo software determinan una serie de pautas para poder desarrollar con éxito un proyecto de desarrollo software. Desde que surgieran estos modelos de proceso, se investigado en nuevas maneras de poder gestionar un proyecto y producir software de calidad. En primer lugar surgieron las metodologías pesadas o tradicionales, pero con el avance del tiempo y la tecnología, surgieron unas nuevas llamadas metodologías ágiles. En el marco de las metodologías ágiles cabe destacar una determinada práctica, la integración continua. Esta práctica surgió de la mano de Martin Fowler, con el objetivo de facilitar el trabajo en grupo y automatizar las tareas de integración. La integración continua se basa en la construcción automática de proyectos con una frecuencia alta, promoviendo la detección de errores en un momento temprano para poder dar prioridad a corregir dichos errores. Sin embargo, una de las claves del éxito en el desarrollo de cualquier proyecto software consiste en utilizar un entorno de trabajo que facilite, sistematice y ayude a aplicar un proceso de desarrollo de una forma eficiente. Este Proyecto Fin de Grado (PFG) tiene por objetivo el análisis de distintas herramientas para configurar un entorno de trabajo que permita desarrollar proyectos aplicando metodologías ágiles e integración continua de una forma fácil y eficiente. Una vez analizadas dichas herramientas, se ha propuesto y configurado un entorno de trabajo para su puesta en marcha y uso. Una característica a destacar de este PFG es que las herramientas analizadas comparten una cualidad común y de alto valor, son herramientas open-source. El entorno de trabajo propuesto en este PFG presenta una arquitectura cliente-servidor, dado que la mayoría de proyectos software se desarrollan en equipo, de tal forma que el servidor proporciona a los distintos clientes/desarrolladores acceso al conjunto de herramientas que constituyen el entorno de trabajo. La parte servidora del entorno propuesto proporciona soporte a la integración continua mediante herramientas de control de versiones, de gestión de historias de usuario, de análisis de métricas de software, y de automatización de la construcción de software. La configuración del cliente únicamente requiere de un entorno de desarrollo integrado (IDE) que soporte el lenguaje de programación Java y conexión con el servidor. ABSTRACT Nowadays, numerous systems (financial, industrial production, basic services infrastructure, etc.) depend on software. According to the Software Engineering definition made by I.Sommerville, “Software engineering is an engineering discipline that is concerned with all aspects of software production from the early stages of system specification through to maintaining the system after it has gone into use.” “Software engineering is not just concerned with the technical processes of software development. It also includes activities such as software project management and the development of tools, methods, and theories to support software production.” Software development process models determine a set of guidelines to successfully develop a software development project. Since these process models emerged, new ways of managing a project and producing software with quality have been investigated. First, the so-called heavy or traditional methodologies appeared, but with the time and the technological improvements, new methodologies emerged: the so-called agile methodologies. Agile methodologies promote, among other practices, continuous integration. This practice was coined by Martin Fowler and aims to make teamwork easier as well as automate integration tasks. Nevertheless, one of the keys to success in software projects is to use a framework that facilitates, systematize, and help to deploy a development process in an efficient way. This Final Degree Project (FDP) aims to analyze different tools to configure a framework that enables to develop projects by applying agile methodologies and continuous integration in an easy and efficient way. Once tools are analyzed, a framework has been proposed and configured. One of the main features of this FDP is that the tools under analysis share a common and high-valued characteristic: they are open-source. The proposed framework presents a client-server architecture, as most of the projects are developed by a team. In this way, the server provides access the clients/developers to the tools that comprise the framework. The server provides continuous integration through a set of tools for control management, user stories management, software quality management, and software construction automatization. The client configuration only requires a Java integrated development environment and network connection to the server.

Estimación del riesgo sísmico en puerto príncipe (Haití)

Tras el devastador terremoto del 12 de enero de 2010 en Puerto Príncipe, Haití, las autoridades locales, numerosas ONGs y organismos nacionales e internacionales están trabajando en el desarrollo de estrategias para minimizar el elevado riesgo sísmico existente en el país. Para ello es necesario, en primer lugar, estimar dicho riesgo asociado a eventuales terremotos futuros que puedan producirse, evaluando el grado de pérdidas que podrían generar, para dimensionar la catástrofe y actuar en consecuencia, tanto en lo referente a medidas preventivas como a adopción de planes de emergencia. En ese sentido, este Trabajo Fin de Master aporta un análisis detallado del riesgo sísmico asociado a un futuro terremoto que podría producirse con probabilidad razonable, causando importantes daños en Puerto Príncipe. Se propone para ello una metodología de cálculo del riesgo adaptada a los condicionantes de la zona, con modelos calibrados empleando datos del sismo de 2010. Se ha desarrollado en el marco del proyecto de cooperación Sismo-Haití, financiado por la Universidad Politécnica de Madrid, que comenzó diez meses después del terremoto de 2010 como respuesta a una petición de ayuda del gobierno haitiano. El cálculo del riesgo requiere la consideración de dos inputs: la amenaza sísmica o movimiento esperado por el escenario definido (sismo de cierta magnitud y localización) y los elementos expuestos a esta amenaza (una clasificación del parque inmobiliario en diferentes tipologías constructivas, así como su vulnerabilidad). La vulnerabilidad de estas tipologías se describe por medio de funciones de daño: espectros de capacidad, que representan su comportamiento ante las fuerzas horizontales motivadas por los sismos, y curvas de fragilidad, que representan la probabilidad de que las estructuras sufran daños al alcanzar el máximo desplazamiento horizontal entre plantas debido a la mencionada fuerza horizontal. La metodología que se propone especifica determinadas pautas y criterios para estimar el movimiento, asignar la vulnerabilidad y evaluar el daño, cubriendo los tres estados del proceso. Por una parte, se consideran diferentes modelos de movimiento fuerte incluyendo el efecto local, y se identifican los que mejor ajustan a las observaciones de 2010. Por otra se clasifica el parque inmobiliario en diferentes tipologías constructivas, en base a la información extraída en una campaña de campo y utilizando además una base de datos aportada por el Ministerio de Obras Públicas de Haití. Ésta contiene información relevante de todos los edificios de la ciudad, resultando un total de 6 tipologías. Finalmente, para la estimación del daño se aplica el método capacidad-demanda implementado en el programa SELENA (Molina et al., 2010). En primer lugar, utilizado los datos de daño del terremoto de 2010, se ha calibrado el modelo propuesto de cálculo de riesgo sísmico: cuatro modelos de movimiento fuerte, tres modelos de tipo de suelo y un conjunto de funciones de daño. Finalmente, con el modelo calibrado, se ha simulado un escenario sísmico determinista correspondiente a un posible terremoto con epicentro próximo a Puerto Príncipe. Los resultados muestran que los daños estructurales serán considerables y podrán llevar a pérdidas económicas y humanas que causen un gran impacto en el país, lo que pone de manifiesto la alta vulnerabilidad estructural existente. Este resultado será facilitado a las autoridades locales, constituyendo una base sólida para toma de decisiones y adopción de políticas de prevención y mitigación del riesgo. Se recomienda dirigir esfuerzos hacia la reducción de la vulnerabilidad estructural - mediante refuerzo de edificios vulnerables y adopción de una normativa sismorresistente- y hacia el desarrollo de planes de emergencia. Abstract After the devastating 12 January 2010 earthquake that hit the city of Port-au-Prince, Haiti, strategies to minimize the high seismic risk are being developed by local authorities, NGOs, and national and international institutions. Two important tasks to reach this objective are, on the one hand, the evaluation of the seismic risk associated to possible future earthquakes in order to know the dimensions of the catastrophe; on the other hand, the design of preventive measures and emergency plans to minimize the consequences of such events. In this sense, this Master Thesis provides a detailed estimation of the damage that a possible future earthquake will cause in Port-au-Prince. A methodology to calculate the seismic risk is proposed, adapted to the study area conditions. This methodology has been calibrated using data from the 2010 earthquake. It has been conducted in the frame of the Sismo-Haiti cooperative project, supported by the Technical University of Madrid, which started ten months after the 2010 earthquake as an answer to an aid call of the Haitian government. The seismic risk calculation requires two inputs: the seismic hazard (expected ground motion due to a scenario earthquake given by magnitude and location) and the elements exposed to the hazard (classification of the building stock into building typologies, as well as their vulnerability). This vulnerability is described through the damage functions: capacity curves, which represent the structure performance against the horizontal forces caused by the seisms; and fragility curves, which represent the probability of damage as the structure reaches the maximum spectral displacement due to the horizontal force. The proposed methodology specifies certain guidelines and criteria to estimate the ground motion, assign the vulnerability, and evaluate the damage, covering the whole process. Firstly, different ground motion prediction equations including the local effect are considered, and the ones that have the best correlation with the observations of the 2010 earthquake, are identified. Secondly, the classification of building typologies is made by using the information collected during a field campaign, as well as a data base provided by the Ministry of Public Works of Haiti. This data base contains relevant information about all the buildings in the city, leading to a total of 6 different typologies. Finally, the damage is estimated using the capacity-spectrum method as implemented in the software SELENA (Molina et al., 2010). Data about the damage caused by the 2010 earthquake have been used to calibrate the proposed calculation model: different choices of ground motion relationships, soil models, and damage functions. Then, with the calibrated model, a deterministic scenario corresponding to an epicenter close to Port-au-Prince has been simulated. The results show high structural damage, and therefore, they point out the high structural vulnerability in the city. Besides, the economic and human losses associated to the damage would cause a great impact in the country. This result will be provided to the Haitian Government, constituting a scientific base for decision making and for the adoption of measures to prevent and mitigate the seismic risk. It is highly recommended to drive efforts towards the quality control of the new buildings -through reinforcement and construction according to a seismic code- and the development of emergency planning.

Quality assurance for precast plants and treatment of imperfections for architectural facades

Quality is the threshold or minimum level required to satisfy the consumer´s demands. In construction the quality is objective, and established by standards. It is very difficult to establish the costs of “no quality” in construction. Each precast unit shall be traceable to a specific set of quality control records.