How Blended Learning Reduce Underachievement in Higher Education: An Experience in Teaching Computer Sciences.

This paper presents a blended learning approach and a study evaluating instruction in a software engineering-related course unit as part of an undergraduate engineering degree program in computing. In the past, the course unit had a lecture-based format. In view of student underachievement and the high course unit dropout rate, a distance-learning system was deployed, where students were allowed to choose between a distance-learning approach driven by a moderate constructivist instructional model or a blended-learning approach. The results of this experience are presented, with the aim of showing the effectiveness of the teaching/learning system deployed compared to the lecture-based system previously in place. The grades earned by students under the new system, following the distance-learning and blended-learning courses, are compared statistically to the grades attained in earlier years in the traditional face-to-face classroom (lecture-based) learning.

The use of computers for graduate education in Project Management. Improving the integration to the industry.

This paper presents an initiative for monitoring the competence acquisition by a team of students with different backgrounds facing the experience of being working by projects and in a project. These students are graduated bachelor engineering are inexperienced in the project management field and they play this course on a time-shared manner along with other activities. The goal of this experience is to increase the competence levels acquired by using an structured web based portfolio tool helping to reinforce how relevant different project management approaches can result for final products and how important it becomes to maintain the integration along the project. Monitoring is carried out by means of have a look on how the work is being done and measuring different technical parameters per participant. The use of this information could make possible to bring additional information to the students involved in terms of their individual competencies and the identification of new opportunities of personal improvement. These capabilities are strongly requested by companies in their daily work as well as they can be very convenient too for students when they try to organize their PhD work.

Interactive Graphic Simulation: An Advanced Methodology to Improve the Teaching-Learning Process in Nuclear Engineering Education and Training

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper

Web-based education in Spanish Universities. A Comparison of Open Source E-Learning Platforms

Web-based education or „e-learning‟ has become a critical component in higher education for the last decade, replacing other distance learning methods, such as traditional computer training or correspondence learning. The number of university students who take on-line courses is continuously increasing all over the world. In Spain, nearly a 90% of the universities have an institutional e-learning platform and over 60% of the traditional on-site courses use this technology as a supplement to the traditional face-to-face classes. This new form of learning allows the disappearance of geographical barriers and enables students to schedule their own learning process, among some other advantages. On-line education is developed through specific software called „e-learning platform‟ or „virtual learning environment‟ (VLE). A considerable number of web-based tools to deliver distance courses are currently available. Open source software packages such as Moodle, Sakai, dotLRN or Dokeos are the most commonly used in the virtual campuses of Spanish universities. This paper analyzes the possibilities that virtual learning environments provide university teachers and learners and offers a technical comparison among some of the most popular e-learning learning platforms.

Including accessibility in higher education curricula for ICT

This paper describes the successful experience carried out by professors of the CETTICO research group of the Technical University of Madrid to incorporate accessibility in the curricula of higher education in ICT in Spain. The paper covers the legal requirements to include accessibility in curricula in Spain, the courses and modules that we have been teaching through the years and the teaching techniques and tools that we have been using.

Some framework ideas for software engineering education

It is difficult, if not impossible, to find something that is not changing in computer technology: circuits, architectures, languages, methods, fields of application ... The "central object" itself of this brand of engineering, software, represents such a diverse reality (many objects) that the fact that it has only one name gives rise to considerable confusion. This issue, among others, was taken up by Fox (1) and, at this point, I would like to underline that it is more of a pragmatic issue than an academic one. Thus, Software Engineering Education moves in an unstable, undefined'world. This axiom governs and limits the. validity of all educational proposals in the area of Software Engineering and, thereforer all the ideas presented in this paper.

Some framework ideas for software engineering education

This paper presents various ideas aimed at improving the conceptual framework for Software Engineering Education. They are centered on gradually seeing Software Engineering through a 3-p (problem-process-product), a 4-p (people (producars)-problem,process,product) and a 5-p (people (producers)-"problem, process, product, people (users)diagram. These diagrams include concepts such as the rate of change of a problem, the relational complexity of a problem, triphase processes with dominant phases, degrees of software evolution,levels of complexity (with the recognition of disorganized complexity), among others.

Assesing the usefulness of the ACM/IEEE-CS Computing Curricula for the design of Computer-Related Engineering Curricula, an experience in Telematics

This paper presents the rationale to build up a Telematics Engineering curriculum. Telematics is a strongly computing oriented area; then, the authors have initially intended to apply the common requirements described in the computing curricula elaborated by the ACM/EEEE-CS Joint Curriculum Task Force. This experience has revealed some problematic aspects in the ACM/IEEE-CS proposal. From the analysis of these problems, a model to guide the selection and specially the approach of the Telematics curriculum contents is proposed. This model can be easily generalized to other strongly computing oriented curricula, whose number is growing everyday

A Web-based Support System for Providing Effective Monitoring, Feedback and Evaluation in Project Management Education

This work introduces a web-based learning environment to facilitate learning in Project Management. The proposed web-based support system integrates methodological procedures and information systems, allowing to promote learning among geographically-dispersed students. Thus, students who are enrolled in different universities at different locations and attend their own project management courses, share a virtual experience in executing and managing projects. Specific support systems were used or developed to automatically collect information about student activities, making it possible to monitor the progress made on learning and assess learning performance as established in the defined rubric.

Towards a virtualized Internet for computer networking assignments

By combining virtualization technologies, virtual private network techniques and parameterization of network scenarios it is possible to enhance a networking laboratory, typically carried out in university laboratory premises using equipment located there, by interconnecting it to virtual networks running on the students own personal computers. This paper describes some experiences applying this model to create hands-on assignments for a large group of students in computer networking education.

Survey on student motivation and approval of educational environment at Universidad Politécnica de Madrid within the European Higher Education area implementation

A recent study elaborated by Vicerrectorado de Ordenación Académica y Planificación Estratégica of Technical University of Madrid (UPM) defines the satisfaction of the university student body as "the response that the University offers to the expectations and demands of service of the students, considered in a general way ". Besides an indicator of academic and institutional insertion of the student, the assessment of student engagement allows us to adapt the academic offer and the extension services of the University to the real needs of the students. The process of convergence towards the European Higher Education Area (EHEA) raises the need to form in competitions, that is to say, of developing in our students capacities and knowledge beyond the purely theoretical-practical thing. Therefore, the perception and experience of the educational process and environment by the students is an important issue to be addressed to accomplish their expectations and achieve a curriculum accordingly to EHEA expectations. The present study aims to explore the student motivation and approval of the educational environment at the UPM. To this end a total of 97 students enrolled in the undergraduate program of Civil Engineering, Computer Engineering and Agronomic Engineering at UPM were surveyed. The survey consisted of 40 questions divided in three blocks. The first one of 20 questions of personal character in that they were gathering, besides the sex and the age, the degree of fulfilment, implication and dedication with the institution and the academic tasks. In the second block we identify 10 questions related to the perception of the student on the teaching quality, and finally a block of 10 questions regarding the Bologna Process. The students personal motivation was moderately high, with a score of 3.6 (all scores are provided on a 5-point scale), being the most valuable items obtaining a university degree (4,3) and the friendship between students (4,2). Any significant difference was shown between sexes (P=0.23) since the averages for this block of questions were of 3.7±0.3 and 3.5±0.4 for women and men respectively. The students are moderately satisfied with their graduate studies with an average score of 3,2, being the questions that reflect a minor satisfaction the research profile of the teachers (2,8) and the organization of the Schools (2,9). The best valued questions are related to the usefulness and quality of the degrees, with 3,5 and 3,4 respectively, and to the interest of the courses within the degree (3,4). For sexes, the results of this block of questions are similar (3.1±0.3 and 3.2±0.3 for men and women respectively=0.79). Also, there were no differences (P=0.39) between the students who arrange work and studies or do not work (3.1±0.2 and 3.2±0.3 respectively). In conclusion, students at UPM present an acceptable degree of motivation and satisfaction with regard to the studies and services that offer their respective Schools. Both characteristics receive the same value both for men and for women and so much for students who arrange work and studies as for those who devote themselves only to studying. In a significant way, students who are more engaged and are in-class attendants present the major degree of satisfaction.Overall, there is a great lack of information regarding the Bologna Process. In fact to the majority, they would like to know more on what it is, what it means and what changes will involve its implementation.

Teamwork competence and academic motivation in computer science engineering studies.

The present work is focused on studying two issues: the “teamwork” generic competence and the “academic motivation”. Currently the professional profile of engineers has a strong component of teamwork. On the other hand, motivational profile of students determines their tendencies when they come to work in team, as well as their performance at work. In this context we suggest four hypotheses: (H1) students improve their teamwork capacity by specific training and carrying out a set of activities integrated into an active learning process; (H2) students with higher mastery motivation have better attitude towards team working; (H3) students with higher mastery motivation obtain better results in academic performance; and (H4) students show different motivation profiles in different circumstances: type of courses, teaching methodologies, different times of the learning process. This study was carried out with computer science engineering students from two Spanish universities. The first results point to an improvement in teamwork competence of students if they have previously received specific training in facets of that competence. Other results indicate that there is a correlation between the motivational profiles of students and their perception about teamwork competence. Finally, and contrary to the initial hypothesis, these profiles appear to not influence significantly the academic performance of students.

A proposal for enhancing the motivation in students of computer programming

Computer programming is known to be one of the most difficult courses for students in the first year of engineering. They are faced with the challenge of abstract thinking and gaining programming skills for the first time. These skills are acquired by continuous practicing from the start of the course. In order to enhance the motivation and dynamism of the learning and assessment processes, we have proposed the use of three educational resources namely screencasts, self-assessment questionnaires and automated grading of assignments. These resources have been made available in Moodle which is a Learning Management System widely used in education environments and adopted by the Telecommunications Engineering School at the Universidad Politécnica de Madrid (UPM). Both teachers and students can enhance the learning and assessment processes through the use of new educational activities such as self-assessment questionnaires and automated grading of assignments. On the other hand, multimedia resources such as screencasts can guide students in complex topics. The resources proposed allow teachers to improve their tutorial actions since they provide immediate feedback and comments to students without the enormous effort of manual correction and evaluation by teachers specially taking into account the large number of students enrolled in the course. In this paper we present the case study where three proposed educational resources were applied. We describe the special features of the course and explain why the use of these resources can both enhance the students? motivation and improve the teaching and learning processes. Our research work was carried out on students attending the "Computer programming" course offered in the first year of a Telecommunications Engineering degree at UPM. This course is mandatory and has more than 450 enrolled students. Our purpose is to encourage the motivation and dynamism of the learning and assessment processes.