Neural bruise prediction models for fruit handling and machinery evaluation.

Some neural bruise prediction models have been implemented in the laboratory, for the most traded fruit species and varieties, allowing the prediction of the acceptability or rejectability for damages, with respect to the EC Standards. Different models have been built for both quasi-static (compression) and dynamic (impact) loads covering the whole commercial ripening period of fruits. A simulation process has been developed gathering the information on laboratory bruise models and load sensor calibrations for different electronic devices (IS-100 and DEA-1, for impact and compression loads respectively). Some evaluation methodology has been designed gathering the information on the mechanical properties of fruits and the loading records of electronic devices. The evaluation system allows to determine the current stage of fruit handling process and machinery.

Comparison of CO2 From Coal Capture Processes and Valorisation Technologies

Coal is the most plentiful and evenly distributed fossil fuel worldwide. Based on current production, it is estimated that the reserves will last approximately 130 years. Its use worldwide has been increasing, mainly due to consumption by emerging countries. CO2 emissions generated by combustion and the repercussions of such on climate change support the view that it could no longer be used. CO2 capture may be the solution to continue using it, which would cater for the growing energy demand worldwide. The aim of this study is to compare different processes concerning CO2 capture that may be economically viable, ultimately showing that coal, a fossil energy source widely distributed around the world, can, as a result of using different CO2 capture processes, be used as a clean source of electricity. Hence, in places where geological hurdles may render the costs of CO2 storage considerably higher, since it might have to travel far, coal may be used for other purposes, thus valorising CO2 within the industrial sector. This research is focused on the technical and economic comparison of the most relevant CO2 capture projects designed in Spain using different existing technologies. The oxyfuel project in Ciuden (Leon, Spain), the IGCC Elcogas, precombustion CO2-capture project (Puertollano, Spain) and the postcombustion project in Carboneras (Almeria, Spain) will be analyzed in order to assess the options available to valorise captured CO2. Valorising captured CO2 may be an adequate solution in areas where, although CO2 capture is still possible, storage is not equally so, thus generating a further benefit. The possible uses of CO2 will be assessed in vegetable growing greenhouses, harnessing CO2 in vegetable life cycles. This will also be used in growing algae for subsequent biodiesel production. Both CO2 capture and valorising will eventually lead to the clean use of coal, which will thus enhance the level of self-supply, aiding the development of electric vehicles, which require large amounts of electricity, as well as improve the level of energy autonomy in countries around the world. Another type of fuel, biodiesel, will also be obtained, without this affecting international food prices.

Clean Coal Technologies Scenario and Evaluation of Present CO2 Dwindling Initiatives to Approach Zero Emission Power Stations By Coal Combustion. Deployment Situation and Evaluation Study

In the present uncertain global context of reaching an equal social stability and steady thriving economy, power demand expected to grow and global electricity generation could nearly double from 2005 to 2030. Fossil fuels will remain a significant contribution on this energy mix up to 2050, with an expected part of around 70% of global and ca. 60% of European electricity generation. Coal will remain a key player. Hence, a direct effect on the considered CO2 emissions business-as-usual scenario is expected, forecasting three times the present CO2 concentration values up to 1,200ppm by the end of this century. Kyoto protocol was the first approach to take global responsibility onto CO2 emissions monitoring and cap targets by 2012 with reference to 1990. Some of principal CO2emitters did not ratify the reduction targets. Although USA and China spur are taking its own actions and parallel reduction measures. More efficient combustion processes comprising less fuel consuming, a significant contribution from the electricity generation sector to a CO2 dwindling concentration levels, might not be sufficient. Carbon Capture and Storage (CCS) technologies have started to gain more importance from the beginning of the decade, with research and funds coming out to drive its come in useful. After first researching projects and initial scale testing, three principal capture processes came out available today with first figures showing up to 90% CO2 removal by its standard applications in coal fired power stations. Regarding last part of CO2 reduction chain, two options could be considered worthy, reusing (EOR & EGR) and storage. The study evaluates the state of the CO2 capture technology development, availability and investment cost of the different technologies, with few operation cost analysis possible at the time. Main findings and the abatement potential for coal applications are presented. DOE, NETL, MIT, European universities and research institutions, key technology enterprises and utilities, and key technology suppliers are the main sources of this study. A vision of the technology deployment is presented.

Comparison of Chemical Absorbents Used for CO2 Capture in Coal-Fired Power Plants.

Climate change conference was hold in Copenhagen in 2009, global warming became the worldwide focus once again. China as a developing country has paid more attention for this environmental problem. In China, a large part of carbon dioxide is emitted to the atmosphere from combustion of fossil fuels in power plants. How to control emission of the greenhouse gas into atmosphere is becoming an urgent concern. Among numerous methods, CO2 capture is the hope to limit the amount of CO2 emitted into the air. The well-established method for CO2 capture is to remove CO2 by absorption into solutions in conventional equipment. Absorbents used for CO2 and H2S capture are important choice for CO2 capture technology. It is related to the cost and efficiency of plant directly and is essential to investigate the proposed CO2 and H2S absorbents.

Comparison of CO2 from coal captureprocesses and valorisation technologies

Coal is the most plentiful and evenly distributed fossil fuel worldwide. Based on current production, it is estimated that the reserves will last approximately 130 years. Its use worldwide has been increasing, mainly due to consumption by emerging countries. CO2 emissions generated by combustion and the repercussions of such on climate change support the view that it could no longer be used. CO2 capture may be the solution to continue using it, which would cater for the growing energy demand worldwide. The aim of this study is to compare different processes concerning CO2 capture that may be economically viable, ultimately showing that coal, a fossil energy source widely distributed around the world, can, as a result of using different CO2 capture processes, be used as a clean source of electricity. Hence, in places where geological hurdles may render the costs of CO2 storage considerably higher, since it might have to travel far, coal may be used for other purposes, thus valorizing CO2 within the industrial sector. This research is focused on the technical and economic comparison of the most relevant CO2 capture projects designed in Spain using different existing technologies. The oxyfuel project in Ciuden (Leon, Spain), the IGCC Elcogas, precombustion CO2-capture project (Puertollano, Spain) and the postcombustion project in Carboneras (Almeria, Spain) will be analyzed in order to assess the options available to valorizecaptured CO2. Valorizing captured CO2 may be an adequate solution in areas where, although CO2 capture is still possible, storage is not equally so, thus generating a further benefit. The possible uses of CO2 will be assessed in vegetable growing greenhouses, harnessing CO2 in vegetable life cycles. This will also be used in growing algae for subsequent biodiesel production. Both CO2capture and valorizing will eventually lead to the clean use of coal, which will thus enhance the level of self-supply, aiding the development of electric vehicles, which require large amounts of electricity, as well as improve the level of energy autonomy in countries around the world. Another type of fuel, biodiesel, will also be obtained, without this affecting international food prices.

CLP Projection for Constraint Handling Rules

This paper introduces and studies the notion of CLP projection for Constraint Handling Rules (CHR). The CLP projection consists of a naive translation of CHR programs into Constraint Logic Programs (CLP). We show that the CLP projection provides a safe operational and declarative approximation for CHR programs. We demónstrate moreover that a confluent CHR program has a least model, which is precisely equal to the least model of its CLP projection (closing henee a ten year-old conjecture by Abdenader et al.). Finally, we illustrate how the notion of CLP projection can be used in practice to apply CLP analyzers to CHR. In particular, we show results from applying AProVE to prove termination, and CiaoPP to infer both complexity upper bounds and types for CHR programs.

AFBC of coal with tyre rubber. Influence of the co-combustion variables on the mineral matter of solid by-products and on Zn lixiviation

The study focuses on the generation and distribution of mineral species in fly and bottom ashes. These were formed during a fluidised co-combustion of a fossil fuel (coal) and a non-fossil fuel (tyre rubber) in a small fluidised bed combustor (7cm x 70cm). The pilot plant had continuous fuel feed using varying ratios of coal and rubber. The study also focuses on the lixiviation behaviour of metallic elements with the assessement of zinc recovering.

Damage mechanisms in the handling of fruits

The recognition of an increasing and worldwide demand for high quality in fruits and vegetables has grown in recent years. Evidence of severe problems of mechanical damage is increasing, and this is affecting the trade of fruits in European and other countries. The potential market for fresh high-quality vegetables and fruits remains restricted by the lack of quality of the majority of products that reach consumers; this is the case for local as well as import/export markets, so a reduction in the consumption of fresh fruits in favour of other fixed-quality products (dairy in particular) may become widespread. In a recent survey (King, 1988, cited in Bellon, 1989), it appears that, for the moment, one third of the surveyed consumers are still continuing to increase their fresh produce consumption. The factors that appear as being most important in influencing the shopping behaviour of these consumers are taste/flavour, freshness/ripeness, appealing look, and cleanliness. Research on mechanical damage in fruit and vegetables has been underway for several years. The first research made on physical properties of fruits was in fact directed towards analysing the response to slow or rapid loading of selected fruits (Fridley et al, 1968; Horsefield et al., 1972). From that time on, research has expanded greatly, and different aspects of the problem have been approached. These include applicable mechanical models for the contact problem, the response of biological tissues to loading, devices for detecting damage causes in machines and equipment, and procedures for sensing bruises in grading and sorting. This chapter will be devoted to the study of actual research results relative to the cause and mechanisms of mechanical damage in fruits (secondarily in vegetables), the development of bruises in these commodities, the models that have been used up to now, and the different factors which have been recognized as influencing the appearance and development of mechanical damage in fruits. The study will be focused mainly on contact-damage - that is, slow or rapid loads applied to the surface of the products and causing bruises. (A bruise is defined as an altered volume of fruit tissues below the skin that is discoloured and softened.) Other types of mechanical damage, like abrasion and scuffing, punctures and cuts, will be also mentioned briefly.

Improving the competitiveness of the Spanish port system by optimising the cargo handling service

Port services, and in particular the cargo handling service, are responsible for the greatest share of costs incurred during the passage of cargo through a port. The provision of these services reliably and efficiently is crucial in a sector in which there is great opacity. This study has provided the responsible administration ? the Port Authority ? with a tool enabling objective decision making both when it comes to issuing the corresponding licenses and during the period of service provision. Furthermore, we have proposed a series of measures whose application would improve the conditions of service provision and reduce the costs incurred by the passage of cargo through the port.

Application of protection means against explosions in underground mines

Underground coal mines explosions generally arise from the inflammation of a methane/air mixture. This explosion can also generate a subsequent coal dust explosion. Traditionally such explosions have being fought eliminating one or several of the factors needed by the explosion to take place. Although several preventive measures are taken to prevent explosions, other measures should be considered to reduce the effects or even to extinguish the flame front. Unlike other protection methods that remove one or two of the explosion triangle elements, namely; the ignition source, the oxidizing agent and the fuel, explosion barriers removes all of them: reduces the quantity of coal in suspension, cools the flame front and the steam generated by vaporization removes the oxygen present in the flame. The present paper is essentially based on the comprehensive state-of–the-art of Protective Systems in underground coal mines, and particularly on the application of Explosion Barriers to improve safety level in Spanish coal mining industry. After an exhaustive study of series EN 14591 standards covering explosion prevention and protection in underground mines, authors have proven explosion barriers effectiveness in underground galleries by Full Scale Tests performed in Polish Barbara experimental mine, showing that the barriers can reduce the effects of methane and/or flammable coal dust explosions to a satisfactory safety level.

Coal purchase optimization: a review from Spain

The study addresses the need to manage the risk of the purchase price of coal in a power company by changing the management model of the purchasing department. It eliminates the risk of price reduces the cost of buying coal and optimizing the performance of all electricity generation plants belonging to the company. You get more flexibility and optionallity to gain additional benefits both economic and efficiency in the supply to our generation fleet. The tools to achieve the above purpose will be financial derivatives that will be used as elements of management and not as mere speculation in the markets.

Tomatoes for processing in the 90's: Postharvest handling.

Processing tomato industry has a high potential in Spain. Variety testing and mechanization studies and applications have been performed during the last 15 years. Many factors affect the quality and product losses during post-harvest handling which may be classified as: main or external factors: those related to the systems, procedures and devices; and fruit factors: those related to fruit properties. A research project is being carried on in the area of Vegas del Guadiana (Badajoz, Spain) to study these factors and to estimate costs, and to develop improved post-harvest handling practices.

Damage Mechanisms in the Handling of fruits.

Recent findings on the importance of losses due to damage incidence, on causes and on mechanisms of damage in fruits are reviewed and discussed. Incidence of damage in different fruits in some European markets has been -proved to be very high. Structure of fruit flesh and skin (hystology) is of foremost importance in the response of fruits to impacts and to compression. Continuous variation of fruit compositional and structural characteristics during maturation has to be taken into consideration when studying damage susceptibility.

Use of electronic fruits to evaluate fruit damage along the handling process.

Two electronic fruits (SEP-1, Simulated Electronic Product, developed in Scotland, and Techmark IS-100, Instrumented Sphere, developed in USA) have been compared in laboratory tests and then used to evaluate handling operations, in several cooperatives of two areas of Spain: Lérida (pome fruits) and Valencia (stone fruits). Advantages of each device were evaluated. Harvest, mechanical bin unloading, and grading line transfers and sizers were identified as operations causing fruit damage.

Effects of precooling and degreening treatments on the susceptibility of peach and citrus to handling damage.

Mechanical damage to fruits results from a combination of fruit properties and of damage inflicting effects by the handling equipment. Treatments were applied to fruits which affect mechanical damage susceptibility: precooling for stone fruits and degreening to citrus fruits. Laboratory tests (compression, impact, tumbling, abrasion) and field tests (damage in the handling lines) were applied to (3) peach, (2) apricot, (2) orange and (1) lemon varieties. Hydroor-air-cooling influence positively peach and apricot firmness and cause a significant reduction in: number of bruised fruits, and size of visible bruise, when combined with a low level of loading during handling. Degreening also affects the resistance of citrus fruits to handling, when compared to green fruits.