Somatic embryogenesis as a regeneration method for clonal propagation of Mediterranean forest species

La mejora y conservación de recursos genéticos en especies forestales lleva siglos de retraso con respecto a las especies agrícolas. Los recursos forestales se han considerado tradicionalmente como recursos �mineros�, en los que primaba la mera extracción dejando exclusivamente a la regeneración natural la labor de sostenibilidad en los montes y dehesas o montados. Hoy en día, el necesario desarrollo del medio rural obliga a la explotación racional de los recursos como medio de garantizar su sostenibilidad. Por ello se está empezando a extender el criterio de que las especies forestales se pueden y deben �cultivar� en determinados espacios. Las características biológicas de las especies forestales las hacen, a menudo, recalcitrantes a las técnicas de mejora y conservación de recursos genéticos tradicionalmente aplicadas a especies agrícolas. En particular, la propagación vegetativa se ha utilizado ampliamente en muchos cultivos leñosos como una herramienta muy poderosa para capturar todo el potencial genético de combinaciones genéticas valiosas. En especies forestales, en particular en las mediterráneas, esta posibilidad raramente se ha podido aplicar debido a la baja capacidad morfogénica de estas especies y la fuerte influencia de la maduración o cambio de fase. En los últimos años la biotecnología forestal ha tenido un desarrollo espectacular. En particular las técnicas de regeneración clonal de plantas basadas en técnicas de cultivo in vitro, fundamentalmente vía embriogénesis somática, se están ya aplicando por muchas empresas privadas e instituciones públicas a nivel semi-operativo con diversas especies, para la conservación de material selecto y el establecimiento de ensayos clonales. Nuestros grupos de trabajo están desarrollando protocolos de regeneración por embriogénesis somática en distintas especies forestales. En esta comunicación se presenta el estado actual de los conocimientos en dos especies típicamente mediterráneas, el alcornoque (Quercus suber L.) y el pino piñonero (Pinus pinea L.), destacando los principales cuellos de botella para su aplicación a gran escala.

Growth data from a field trial of Quercus suber plants regenerated from selected trees and their half-sib progenies by somatic embryogenesis

The development of reliable clonal propagation technologies is a requisite for performing Multi-Varietal Forestry (MVF). Somatic embryogenesis is considered the tissue culture based method more suitable for operational breeding of forest trees. Vegetative propagation is very difficult when tissues are taken from mature donors, making clonal propagation of selected trees almost impossible. We have been able to induce somatic embryogenesis in leaves taken from mature oak trees, including cork oak (Quercus suber). This important species of the Mediterranean ecosystem produces cork regularly, conferring to this species a significant economic value. In a previous paper we reported the establishment of a field trial to compare the growth of plants of somatic origin vs zygotic origin, and somatic plants from mature trees vs somatic plants from juvenile seedlings. For that purpose somatic seedlings were regenerated from five selected cork oak trees and from young plants of their half-sib progenies by somatic embryogenesis. They were planted in the field together with acorn-derived plants of the same families. After the first growth period, seedlings of zygotic origin doubled the height of somatic seedlings, showing somatic plants of adult and juvenile origin similar growth. Here we provide data on height and diameter increases after two additional growth periods. In the second one, growth parameters of zygotic seedlings were also significantly higher than those of somatic ones, but there were not significant differences in height increase between seedlings and somatic plants of mature origin. In the third growth period, height and diameter increases of somatic seedlings cloned from the selected trees did not differ from those of zygotic seedlings, which were still higher than data from plants obtained from somatic embryos from the sexual progeny. Therefore, somatic seedlings from mature origin seem not to be influenced by a possible ageing effect, and plants from somatic embryos tend to minimize the initial advantage of plants from acorns

Obtención de clones de alcornoque (Quercus suber L.) mediante embriogénesis somática: aplicación de medios líquidos y biorreactores en la sincronización de los procesos de desarrollo y maduración de los embriones

El alcornoque tiene un gran valor ambiental, como integrante de los ecosistemas forestales mediterráneos, e interés comercial por el valor de la bellota (alimentación del cerdo ibérico), el carbón, la madera y sobre todo por las aplicaciones industriales del corcho. Las posibilidades de mejora genética del alcornoque, como las de otras especies forestales, están limitadas por sus largos ciclos reproductivos y porque su propagación vegetativa mediante estaquillado solo es posible en estados muy juveniles. Por ello este sistema de propagación tiene muy poca, o ninguna, utilidad práctica en la mejora genética. La embriogénesis somática es la vía más apropiada para la clonación de muchas especies forestales y ha hecho posible el desarrollo a gran escala de plantaciones multivarietales de coníferas. En alcornoque es posible la regeneración completa de árboles adultos mediante embriogénesis somática. Con los protocolos actuales (en medio semisólido), los embriones se generan formando acúmulos y en la fase de multiplicación conviven embriones en distintos estados de desarrollo. Es un sistema asincrónico, con baja eficacia para la propagación en masa, que no elimina completamente las dificultades para el desarrollo de programas de mejora genética del alcornoque. En otras especies la utilización de medios líquidos ha mejorado: la sincronización, productividad de los cultivos, el manejo y reducido los costes de producción. Por ello el desarrollo de suspensiones embriogénicas de alcornoque se plantea como una vía para aumentar la eficacia de la propagación clonal a gran escala. En la presente tesis se desarrollan cultivos embriogénicos de alcornoque en medio líquido. El capítulo 3 aborda el establecimiento y mantenimiento de suspensiones, el capítulo 4 el desarrollo de una fase de proliferación en medio líquido y el capítulo 5 la utilización de sistemas de cultivo en medio líquido, estacionarios y de inmersión temporal, como vía para favorecer la maduración de los embriones somáticos. Para iniciar los cultivos en medio líquido se emplearon agregados de embriones tomados de la fase de proliferación en medio semisólido. Cuando estos agregados se inocularon directamente en medio líquido no se logró el establecimiento de las suspensiones. El establecimiento se consiguió empleando como inóculo las células y Resumen pequeños agregados embriogénicos, de tamaño comprendido entre 41 y 800 μm, desprendidas por agitación breve de los agregados de embriones. El mantenimiento se logró inoculando en baja densidad masas embriogénicas compactas de tamaño comprendido entre 0,8 y 1,2 mm. Estas suspensiones, muy heterogéneas, mantuvieron su capacidad de proliferación y de regeneración de embriones al menos durante diez subcultivos consecutivos. El protocolo de iniciación y mantenimiento, desarrollado inicialmente con un solo genotipo, fue eficaz cuando se probó sobre otros 11 genotipos de alcornoque. En la fase de proliferación se ensayaron tres tipos de envase y tres velocidades de agitación. La combinación envase × velocidad determinó el intercambio gaseoso, la disponibilidad de oxígeno y el estrés hidrodinámico. Los agregados embriogénicos de alcornoque crecieron incluso en condiciones de hipoxia no siendo la disponibilidad de oxígeno un factor limitante del crecimiento para tasas de trasferencia de oxígeno comprendidas entre 0,11 h-1 y 1,47 h-1. Por otra parte la producción de biomasa creció con el estrés hidrodinámico para valores de índice de cizalladura inferiores a 5 x 10-3 cm min-1. La mayor producción de biomasa se obtuvo con matraces Erlenmeyer de 100 ml y alta velocidad de agitación (160 rpm) mientras que la diferenciación de embriones se vio favorecida por bajas velocidades de agitación (60 rpm) asociadas con bajas disponibilidades de oxígeno. La posibilidad de madurar embriones de alcornoque en medio líquido se estudió utilizando sistemas de inmersión permanente y sistemas de inmersión temporal. En inmersión permanente no se diferenciaron embriones cotiledonares (posiblemente por hiperhidricidad). Los sistemas de inmersión temporal permitieron obtener embriones maduros en estado cotiledonar y capaces de regenerar plantas in vitro. Concentraciones de sacarosa superiores a 60 g l-1 y frecuencias de inmersión iguales o inferiores a una diaria, tuvieron efectos negativos para el desarrollo de los embriones somáticos. En los sistemas de inmersión temporal los parámetros físico-químicos del medio de cultivo se mantuvieron estables y no se observó ninguna limitación de nutrientes. No obstante, estos sistemas se vieron afectados por la evaporación que generó el flujo de aire necesario para desplazar el líquido en cada periodo de inmersión. Abstract ABSTRACT Cork oak is one of the most important tree species of the Mediterranean ecosystem. Besides its high environmental value has a great economic interest due to the sustainable production of acorns (to feed the Iberian pig) charcoal, timber and cork, which is a renewable natural product with various technological applications. As happens with other forest species, cork oak genetic improvement programs are limited by their long life cycles and because vegetative propagation by cuttings it´s only possible in very juvenile plants. Hence this propagation system is useless or has little practical use for breeding cork oak. Plant regeneration by somatic embryogenesis is the most suitable way for cloning many forest species, and it is the enabling technology which has allowed the establishment of large-scale conifer multi-varietal plantations. Clonal plant regeneration of mature cork oak trees can be achieved through somatic embryogenesis. Somatic embryos at different stages of development and forming clusters are produced during the multiplication phase with current protocols (using semisolid medium). This is an asynchronous low-efficient process not suitable for mass propagation, and therefore it does not solve the difficulties presented by cork oak breeding programs. Culture in liquid medium has been used with other species to improve: synchronization, yield, handling, and to reduce production costs. Thus the development of cork oak embryogenic suspension cultures is envisaged as a way to increase the efficiency of large scale clonal propagation. The thesis herein develops cork oak embryogenic cultures in liquid medium. In chapter 3 establishment and maintenance of suspension cultures are developed, chapter 4 studies proliferation phase in liquid medium and chapter 5 considers the use of different systems of culture in liquid medium, both stationary and temporary immersion, as a way to promote somatic embryos maturation. Clusters of embryos taken from proliferating cultures on semisolid medium were used to initiate the cultures in liquid medium. When these clusters were inoculated directly in liquid medium establishment of suspension cultures was not executed. However using, as initial inoculum, cells and cell aggregates with a size between 41 and 800 μm detached from these clusters of embryos, subjected to a brief shaking, suspension cultures could be established. Suspension maintenance was achieved by inoculating compact embryogenic Abstract clumps with a size between 0.8 and 1.2 mm at low density. The suspension cultures, very heterogeneous, retained both their proliferation and embryo regeneration capacity for at least ten consecutive subcultures. The initiation and maintenance protocol, initially developed with a single genotype, was effective when tested on 11 additional genotypes of cork oak. In proliferation phase three types of vessels and three different levels of agitation were assayed. The combination vessel × orbiting speed determined gas exchange, oxygen availability and hydrodynamic stress. Cork oak embryogenic aggregates grew even under hypoxia conditions; oxygen availability at transfer rates between 0.11 and 1.47 h-1 was not a limiting factor for growth. Furthermore the biomass production was increased with hydrodynamic stress when shear rate values were of less than 5 x 10-3 cm min-1. The highest biomass production was obtained with 100 ml Erlenmeyer flask and high stirring speed (160 rpm) while the differentiation of embryos was favored by low agitation speeds (60 rpm) associated with low oxygen availability. The possibility to mature cork oak somatic embryos in liquid medium was studied using both permanent immersion systems and temporary immersion systems. Cotyledonary embryos did not differentiate in permanent immersion conditions (probably due to hyperhydricity). Temporary immersion systems allowed obtaining mature cotyledonary embryos, which were able to regenerate plants in vitro. Sucrose concentrations above 60 g l-1 and immersion frequencies equal to or lower than one each 24 h had negative effects on somatic embryo development. Physicochemical parameters of the culture medium in temporary immersion systems were stable and showed no limitation of nutrients. However, these systems were affected by the evaporation generated by the airflow necessary to relocate the medium at each immersion period.

Propagation of Nuclear Data Uncertainties in Transmutation Calculations Using ACAB Code

The assessment of the accuracy of parameters related to the reactor core performance (e.g., ke) and f el cycle (e.g., isotopic evolution/transmutation) due to the uncertainties in the basic nuclear data (ND) is a critical issue. Different error propagation techniques (adjoint/forward sensitivity analysis procedures and/or Monte Carlo technique) can be used to address by computational simulation the systematic propagation of uncertainties on the final parameters. To perform this uncertainty assessment, the ENDF covariance les (variance/correlation in energy and cross- reactions-isotopes correlations) are required. In this paper, we assess the impact of ND uncertainties on the isotopic prediction for a conceptual design of a modular European Facility for Industrial Transmutation (EFIT) for a discharge burnup of 150 GWd/tHM. The complete set of uncertainty data for cross sections (EAF2007/UN, SCALE6.0/COVA-44G), radioactive decay and fission yield data (JEFF-3.1.1) are processed and used in ACAB code.

Numerical simulation of the upward propagation of a flame in a vertical tube filled with a very lean mixture.

Upwardpropagation of a premixed flame in averticaltubefilled with a very leanmixture is simulated numerically using a single irreversible Arrhenius reaction model with infinitely high activation energy. In the absence of heat losses and preferential diffusion effects, a curved flame with stationary shape and velocity close to those of an open bubble ascending in the same tube is found for values of the fuel mass fraction above a certain minimum that increases with the radius of the tube, while the numerical computations cease to converge to a stationary solution below this minimum mass fraction. The vortical flow of the gas behind the flame and in its transport region is described for tubes of different radii. It is argued that this flow may become unstable when the fuel mass fraction is decreased, and that this instability, together with the flame stretch due to the strong curvature of the flame tip in narrow tubes, may be responsible for the minimum fuel mass fraction. Radiation losses and a Lewis number of the fuel slightly above unity decrease the final combustion temperature at the flame tip and increase the minimum fuel mass fraction, while a Lewis number slightly below unity has the opposite effect.

Propagation of nuclear data uncertainties in fuel cycle calculations using MONTE-CARLO Technique

The uncertainty propagation in fuel cycle calculations due to Nuclear Data (ND) is a important important issue for : issue for : • Present fuel cycles (e.g. high burnup fuel programme) • New fuel cycles designs (e.g. fast breeder reactors and ADS) Different error propagation techniques can be used: • Sensitivity analysis • Response Response Surface Method Surface Method • Monte Carlo technique Then, p p , , in this paper, it is assessed the imp y pact of ND uncertainties on the decay heat and radiotoxicity in two applications: • Fission Pulse Decay ( y Heat calculation (FPDH) • Conceptual design of European Facility for Industrial Transmutation (EFIT)

Optimized edge appearance probability for cooperative localization based on tree-reweighted nonparametric belief propagation

Nonparametric belief propagation (NBP) is a well-known particle-based method for distributed inference in wireless networks. NBP has a large number of applications, including cooperative localization. However, in loopy networks NBP suffers from similar problems as standard BP, such as over-confident beliefs and possible nonconvergence. Tree-reweighted NBP (TRW-NBP) can mitigate these problems, but does not easily lead to a distributed implementation due to the non-local nature of the required so-called edge appearance probabilities. In this paper, we propose a variation of TRWNBP, suitable for cooperative localization in wireless networks. Our algorithm uses a fixed edge appearance probability for every edge, and can outperform standard NBP in dense wireless networks.

Uniformly reweighted belief propagation for distributed Bayesian hypothesis testing

Belief propagation (BP) is a technique for distributed inference in wireless networks and is often used even when the underlying graphical model contains cycles. In this paper, we propose a uniformly reweighted BP scheme that reduces the impact of cycles by weighting messages by a constant ?edge appearance probability? rho ? 1. We apply this algorithm to distributed binary hypothesis testing problems (e.g., distributed detection) in wireless networks with Markov random field models. We demonstrate that in the considered setting the proposed method outperforms standard BP, while maintaining similar complexity. We then show that the optimal ? can be approximated as a simple function of the average node degree, and can hence be computed in a distributed fashion through a consensus algorithm.

Uniformly Reweighted Belief Propagation: A Factor Graph Approach

Tree-reweighted belief propagation is a message passing method that has certain advantages compared to traditional belief propagation (BP). However, it fails to outperform BP in a consistent manner, does not lend itself well to distributed implementation, and has not been applied to distributions with higher-order interactions. We propose a method called uniformly-reweighted belief propagation that mitigates these drawbacks. After having shown in previous works that this method can substantially outperform BP in distributed inference with pairwise interaction models, in this paper we extend it to higher-order interactions and apply it to LDPC decoding, leading performance gains over BP.

A Precharge-Absorbed DPL Logic for Reducing Early Propagation Effects on FPGA Implementations

In this paper, a new countermeasure against power and electromagnetic (EM) Side Channel Attacks (SCA) on FPGA implemented cryptographic algorithms is proposed. This structure mainly focuses on a critical vulnerability, Early Evaluation, also known as Early Propagation Effect (EPE), which exists in most conventional SCA-hardened DPL (Dual-rail with Precharge Logic) solutions. The main merit of this proposal is that the EPE can be effectively prevented by using a synchronized non regular precharge network, which maintains identical routing between the original and mirror parts, where costs and design complexity compared with previous EPE-resistant countermeasures are reduced, while security level is not sacrificed. Another advantage for our Precharge Absorbed(PA) - DPL method is that its Dual-Core style (independent architecture for true and false parts) could be generated using partial reconfiguration. This helps to get a dynamic security protection with better energy planning. That means system only keeps the true part which fulfills the normal en/decryption task in low security level, and reconfigures the false parts once high security level is required. A relatively limited clock speed is a compromise, since signal propagation is restricted to a portion of the clock period. In this paper, we explain the principles of PA-DPL and provide the guidelines to design this structure. We experimentally validate our methods in a minimized AES co-processor on Xilinx Virtex-5 board using electromagnetic (EM) attacks.

Modeling of the Division Point of Different Propagation Mechanisms in the Near-Region Within Arched Tunnels

An accurate characterization of the near-region propagation of radio waves inside tunnels is of practical importance for the design and planning of advanced communication systems. However, there has been no consensus yet on the propagation mechanism in this region. Some authors claim that the propagation mechanism follows the free space model, others intend to interpret it by the multi-mode waveguide model. This paper clarifies the situation in the near-region of arched tunnels by analytical modeling of the division point between the two propagation mechanisms. The procedure is based on the combination of the propagation theory and the three-dimensional solid geometry. Three groups of measurements are employed to verify the model in different tunnels at different frequencies. Furthermore, simplified models for the division point in five specific application situations are derived to facilitate the use of the model. The results in this paper could help to deepen the insight into the propagation mechanism within tunnel environments.

Propagation Mechanism Analysis Before the Break Point Inside Tunnels

There is no unanimous consensus yet on the propagation mechanism before the break point inside tunnels. Some deem that the propagation mechanism follows the free space model, others argue that it should be described by the multimode waveguide model. Firstly, this paper analyzes the propagation loss in two mechanisms. Then, by conjunctively using the propagation theory and the three-dimensional solid geometry, a generic analytical model for the boundary between the free space mechanism and the multi-mode waveguide mechanism inside tunnels has been presented. Three measurement campaigns validate the model in different tunnels at different frequencies. Furthermore, the condition of the validity of the free space model used in tunnel environment has been discussed in some specific situations. Finally, through mathematical derivation, the seemingly conflicting viewpoints on the free space mechanism and the multi-mode waveguide mechanism have been unified in some specific situations by the presented generic model. The results in this paper can be helpful to gain deeper insight and better understanding of the propagation mechanism inside tunnels

Asymmetric propagation of airblast from bench blasting

This paper investigates the propagation of airblast from quarry blasting. Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and polar coordinates of the point of interest (distance to the blast and azimuth with respect to the free face of the blast). The model is in the form of the product of a classical scaled distance attenuation law times a directional correction factor. The latter considers the influence of the bench face, and attenuates overpressure at the top level and amplifies it at the bottom. Such factor also accounts for the effect of the delay by amplifying the pressure in the direction of the initiation sequence if the velocity of initiation exceeds half the speed of sound and up to an initiation velocity in the range of the speed of sound. The model has been fitted to an empirical data set composed by 134 airblast records monitored in 47 blasts at two quarries. The measurements were made at distances to the blast less than 450 m. The model is statistically significant and has a determination coefficient of 0.869

Analysis and optimization of propagation losses in LiNbO3 optical waveguides produced by swift heavy-ion irradiation

The propagation losses (PL) of lithium niobate optical planar waveguides fabricated by swift heavy-ion irradiation (SHI), an alternative to conventional ion implantation, have been investigated and optimized. For waveguide fabrication, congruently melting LiNbO3 substrates were irradiated with F ions at 20 MeV or 30 MeV and fluences in the range 1013–1014 cm−2. The influence of the temperature and time of post-irradiation annealing treatments has been systematically studied. Optimum propagation losses lower than 0.5 dB/cm have been obtained for both TE and TM modes, after a two-stage annealing treatment at 350 and 375∘C. Possible loss mechanisms are discussed.

Coupled model of initiation and propagation of corrosion in reinforced concrete

Corrosion of reinforcing steel in concrete due to chloride ingress is one of the main causes of the deterioration of reinforced concrete structures. Structures most affected by such a corrosion are marine zone buildings and structures exposed to de-icing salts like highways and bridges. Such process is accompanied by an increase in volume of the corrosión products on the rebarsconcrete interface. Depending on the level of oxidation, iron can expand as much as six times its original volume. This increase in volume exerts tensile stresses in the surrounding concrete which result in cracking and spalling of the concrete cover if the concrete tensile strength is exceeded. The mechanism by which steel embedded in concrete corrodes in presence of chloride is the local breakdown of the passive layer formed in the highly alkaline condition of the concrete. It is assumed that corrosion initiates when a critical chloride content reaches the rebar surface. The mathematical formulation idealized the corrosion sequence as a two-stage process: an initiation stage, during which chloride ions penetrate to the reinforcing steel surface and depassivate it, and a propagation stage, in which active corrosion takes place until cracking of the concrete cover has occurred. The aim of this research is to develop computer tools to evaluate the duration of the service life of reinforced concrete structures, considering both the initiation and propagation periods. Such tools must offer a friendly interface to facilitate its use by the researchers even though their background is not in numerical simulation. For the evaluation of the initiation period different tools have been developed: Program TavProbabilidade: provides means to carry out a probability analysis of a chloride ingress model. Such a tool is necessary due to the lack of data and general uncertainties associated with the phenomenon of the chloride diffusion. It differs from the deterministic approach because it computes not just a chloride profile at a certain age, but a range of chloride profiles for each probability or occurrence. Program TavProbabilidade_Fiabilidade: carries out reliability analyses of the initiation period. It takes into account the critical value of the chloride concentration on the steel that causes breakdown of the passive layer and the beginning of the propagation stage. It differs from the deterministic analysis in that it does not predict if the corrosion is going to begin or not, but to quantifies the probability of corrosion initiation. Program TavDif_1D: was created to do a one dimension deterministic analysis of the chloride diffusion process by the finite element method (FEM) which numerically solves Fick’second Law. Despite of the different FEM solver already developed in one dimension, the decision to create a new code (TavDif_1D) was taken because of the need to have a solver with friendly interface for pre- and post-process according to the need of IETCC. An innovative tool was also developed with a systematic method devised to compare the ability of the different 1D models to predict the actual evolution of chloride ingress based on experimental measurements, and also to quantify the degree of agreement of the models with each others. For the evaluation of the entire service life of the structure: a computer program has been developed using finite elements method to do the coupling of both service life periods: initiation and propagation. The program for 2D (TavDif_2D) allows the complementary use of two external programs in a unique friendly interface: • GMSH - an finite element mesh generator and post-processing viewer • OOFEM – a finite element solver. This program (TavDif_2D) is responsible to decide in each time step when and where to start applying the boundary conditions of fracture mechanics module in function of the amount of chloride concentration and corrosion parameters (Icorr, etc). This program is also responsible to verify the presence and the degree of fracture in each element to send the Information of diffusion coefficient variation with the crack width. • GMSH - an finite element mesh generator and post-processing viewer • OOFEM – a finite element solver. The advantages of the FEM with the interface provided by the tool are: • the flexibility to input the data such as material property and boundary conditions as time dependent function. • the flexibility to predict the chloride concentration profile for different geometries. • the possibility to couple chloride diffusion (initiation stage) with chemical and mechanical behavior (propagation stage). The OOFEM code had to be modified to accept temperature, humidity and the time dependent values for the material properties, which is necessary to adequately describe the environmental variations. A 3-D simulation has been performed to simulate the behavior of the beam on both, action of the external load and the internal load caused by the corrosion products, using elements of imbedded fracture in order to plot the curve of the deflection of the central region of the beam versus the external load to compare with the experimental data.