Teaching art and history to photonics students

The case to be reported in this paper is the teaching of topics involving the relation among Photonics, its history, the international situation and the artistic movements in each period. These kind of new studies correspond to a new tendency in teaching interdisciplinary topics to students coming from different areas. Two main courses, one in History and other one in Art, will be taken as examples. Theses two courses have been taught for several years in Madrid, Spain, for Telecomm students and the results have been very satisfactory

Adapting a speech into sign language translation system to a new domain

This paper presents a methodology for adapting an advanced communication system for deaf people in a new domain. This methodology is a user-centered design approach consisting of four main steps: requirement analysis, parallel corpus generation, technology adaptation to the new domain, and finally, system evaluation. In this paper, the new considered domain has been the dialogues in a hotel reception. With this methodology, it was possible to develop the system in a few months, obtaining very good performance: good speech recognition and translation rates (around 90%) with small processing times.

A system of systems engineering approach to design new smarter and energy efficient products

The concept of smartness of energy efficient products and systems from a business perspective has been investigated by several authors. The problem of understanding, designing, engineering and governing these technologies requires new concepts. The emergence of these modern technologies causes a myriad of interconnected systems, which are working together to satisfy the necessities of modern life. The problem of understanding, designing, engineering, and governing these technologies requires new concepts. Development of System of System Engineering (SoSE) is an attempt by the systems engineering and science community to fulfill this requirement.

Construction History in Spain: the Discipline's Foundation

In the past two decades the History of Construction has started to become an independent discipline. On one hand, the number of articles, theses and books that could be assigned to this field has grown exponentially. Furthermore, there have been numerous and remarkably successful Congresses: 12 National (Spain 8; France 2; United Kingdom 1; Germany 1) and 4 International Congresses (Madrid 2003, Cambridge 2006, Cottbus 2009, Paris 2012), see Table 1 below. However, the situation is far from that corresponding to an already recognized discipline, such as the History of Art or the History of Science. There are no University chairs and departments, and in the reference databases “Construction History” is not listed as a common descriptor. This is not surprising; it reflects the inertia of academia to accept new disciplines. In what follows we will discuss the current state of discipline in Spain. Previous articles have tackled the matter. We will try to avoid unnecessary repetitions and concentrate on: 1) The activities of the Spanish Society of Construction History; 2) Its consequences on teaching and research, taken as a case study the experience in the School of Architecture of Madrid, and 3) We will give a provisional List of dissertations on Construction History read in Spain in the last forty years. First, we will try to define with the least possible ambiguity its field and its objectives. The intention is not to enter into the actual debate on the "definition" of Construction History, but to expose, in as detached as possible way, the ideas behind the actions made.

New Constructive Solutions to Improve Energy Efficiency in Existing Buildings and their Economic Viability

The improvement of energy efficiency in existing buildings is always a challenge due to their particular, and sometimes protected, constructive solutions. New constructive regulations in Spain leave a big undefined gap when a restoration is considered because they were developed for new buildings. However, rehabilitation is considered as an opportunity for many properties because it allows owners to obtain benefits from the use of the buildings. The current financial and housing crisis has turned society point of view to existing buildings and making them more efficient is one of the Spanish government’s aims. The economic viability of a rehabilitation action should take all factors into account: both construction costs and the future operative costs of the building must be considered. Nevertheless, the application of these regulations in Spain is left to the designer’s opinion and always under a subjective point of view. With the research work described in this paper and with the help of some case-studies, the cost of adapting an existing building to the new constructive regulations will be studied and Energetic Efficiency will be evaluated depending on how the investment is recovered. The interest of the research is based on showing how new constructive solutions can achieve higher levels of efficiency in terms of energy, construction and economy and it will demonstrate that Life Cycle Costing analysis can be a mechanism to find the advantages and disadvantages of using these new constructive solutions. Therefore, this paper has the following objectives: analysing constructive solutions in existing buildings - to establish a process for assessing total life cycle costs (LCC) during the planning stages with consideration of future operating costs - to select the most advantageous operating system – To determine the return on investment in terms of construction costs based on new techniques, the achieved energy savings and investment payback periods.

A collaborative filtering approach to mitigate the new user cold start problem.

The new user cold start issue represents a serious problem in recommender systems as it can lead to the loss of new users who decide to stop using the system due to the lack of accuracy in the recommenda- tions received in that first stage in which they have not yet cast a significant number of votes with which to feed the recommender system?s collaborative filtering core. For this reason it is particularly important to design new similarity metrics which provide greater precision in the results offered to users who have cast few votes. This paper presents a new similarity measure perfected using optimization based on neu- ral learning, which exceeds the best results obtained with current metrics. The metric has been tested on the Netflix and Movielens databases, obtaining important improvements in the measures of accuracy, precision and recall when applied to new user cold start situations. The paper includes the mathematical formalization describing how to obtain the main quality measures of a recommender system using leave- one-out cross validation.

New systems of management to improve the health and welfare of rabbits in farm conditions = Nuevos sistemas de cría y manejo para mejorar la salud y bienestar de conejos de granja

El objetivo general de esta Tesis Doctoral fue evaluar nuevos sistemas de alojamiento y cría de conejos de granja, estudiando tanto parámetros comportamentales (experimento 1) como productivos y reproductivos (experimento 3). Además, se evaluaron diferentes técnicas de muestreo con el fin de optimizar el tiempo empleado para el estudio del comportamiento animal (experimento 2). En el experimento 1, se estudió el comportamiento de conejas alojadas en dos tipos de jaulas (TJ), convencionales vs. alternativas con una plataforma elevada, en distintos estados fisiológicos (EF), lactantes y gestantes. Se observó el comportamiento de 12 conejas reproductoras con grabaciones de una duración de 24 h continuas. Independientemente del EF y TJ, las conejas pasaron gran parte de su tiempo sobre el reposapatas (57,7 %, de media). Sin embargo, debido al uso de la plataforma (23,0% del tiempo, de media), las conejas lactantes permanecieron un 36,6 % menos de tiempo (P<0,001) sobre el reposapatas y las gestantes un 27,0% menos (P<0,001) sobre el enrejillado en jaulas alternativas que en convencionales. En las jaulas alternativas, las conejas podían adoptar la postura “levantada”, sin embargo ésta fue observada solamente en conejas gestantes una media de 4,6 veces al día. Las conejas bebieron con mas frecuencia en jaulas convencionales que en alternativas (24,6 vs 19,1 veces al día; P<0,05). Se observó una mayor duración y frecuencia del comportamiento “interactuando con compañeras” en conejas gestantes alojadas en jaulas convencionales (276 s/d y 4,6 veces/d; P<0,05). La frecuencia de “interactuando con gazapos” fue menor en jaulas alternativas que en convencionales (2,4 vs 8,6 veces al día; P<0,01). La hora del día afectó al comportamiento de las conejas, teniendo un comportamiento menos activo durante las horas centrales del día. Durante las horas de oscuridad, las conejas estuvieron más inquietas realizando comportamientos como ‘encabritarse’ o amamantar, coincidiendo éstos en el tiempo en el cual las conejas pasaron más tiempo en la plataforma. Las conejas utilizaron frecuentemente la plataforma, independientemente del estado fisiológico. En la fase de lactación, las conejas utilizaron la plataforma para huir de los intentos de mamar por parte de los gazapos cuando éstas no estaban receptivas. El uso de la plataforma puede dar lugar a problemas higiénicos debidos tanto por la acumulación de heces sobre ella como por la caída de heces y orina sobre los animales que están en la parte inferior. La ausencia de estereotipias por parte de las conejas tanto en jaulas alternativas como en convencionales no sugiere una falta de bienestar debida al sistema de alojamiento. En el experimento 2, se compararon distintos métodos de observación simplificada con respecto un método de referencia usando grabaciones continuas de 24 h para la evaluación del comportamiento de conejas en distintos estados fisiológicos (gestantes y lactantes) alojadas en dos tipos de jaulas (convencionales y alternativas). Se analizaron un total de 576 h de grabaciones continuas de 24 h en 12 conejas reproductoras al final del periodo de lactación y en las mismas conejas después del destete. Los comportamientos observados se clasificaron en tres categorías independientes (localización en la jaula, postura y comportamientos funcionales). Se utilizaron grabaciones continuas de 24 h como método de referencia para validar otros cuatro métodos de observación simplificados, utilizando grabaciones de distinta duración y frecuencia a lo largo del día. Métodos regulares: corto y largo con 2.4 y 8 h de observación respectivamente, y métodos irregulares: corto y largo con 6 y 8 h de observación, respectivamente. Como resultado, se observó que independientemente del sistema de alojamiento, el mejor método para reducir el tiempo de observación necesario para evaluar el comportamiento de conejas reproductoras depende del tipo de variable a estudiar y del estado fisiológico de las conejas. En gestantes, los métodos irregulares no fueron adecuados para estimar comportamientos de larga duración tales como tumbada, sentada, descansando y acicalándose. Sin embargo, en ambos estados fisiológicos, los métodos regulares fueron precisos para los comportamientos de los grupos localización y postura y para comportamientos funcionales de larga duración. Por otro lado, los coeficientes de variación de los comportamientos poco frecuentes realizados principalmente durante el periodo de oscuridad fueron muy altos, y el método irregular largo obtuvo los menores errores de estimación para éstos comportamientos. En el experimento 3, se estudió el efecto de un uso combinado de lactaciones largas (hasta 46 días) con jaulas alternativas sobre los parámetros productivos y reproductivos de 104 conejas y sus camadas durante cinco ciclos reproductivos. La mitad de las conejas fueron alojadas en jaulas polivalentes convencionales (39 cm x 100 cm x 30 cm) y la otra mitad en jaulas polivalentes alternativas (39 cm x 100 cm x 60 cm), con una plataforma elevada. Dentro de cada grupo de alojamiento, la mitad de las conejas se destetaron a 32 días y la otra mitad a 46 días tras el parto. Las lactaciones más largas afectaron negativamente al peso (P<0,001), contenido en grasa y energía (P<0,05) de las conejas al final del periodo de lactación, pero éste efecto disminuyó con el número de partos. La fertilidad, prolificidad y la mortalidad de las conejas no fue afectada por la duración de la lactación. El destete tardío dio lugar a un mayor tamaño y peso de la camada al final del periodo de crecimiento (8,9 y 11,3 %, respectivamente) y a un menor índice de conversión por jaula durante el todo el periodo experimental (13,5 %) con respecto al destete convencional (P<0,001). Éstos resultados fueron paralelos a la menor mortalidad global (12,6 vs 17,6 %; P<0,05) observada en gazapos con destete tardío. Las diferencias en los parámetros productivos con las distintas edades al destete sólo fueron observadas en los ciclos con peor estado sanitario (tercer y quinto ciclo), en los cuales el destete tardío redujo la mortalidad. El tipo de jaula no afectó al peso de la coneja, condición corporal, mortalidad, fertilidad ni tamaño de camada durante los cinco primeros ciclos reproductivos. Sin embargo, el peso de la camada y el índice de conversión a los 21 días de edad fueron 4,2% mayor (P<0,001) y 5,0% menor (P<0,005) en animales alojados en jaulas alternativas que en jaulas convencionales. A día 59 las jaulas alternativas dieron lugar a camadas más pesadas (P<0,01); sin embargo, éste efecto fue influenciado por la densidad alcanzada en cada ciclo, ya que cuando la densidad de los animales fue menor que 40kg/m2 (tercer y quinto ciclo), el efecto del tipo de jaula sobre el peso de la camada no fue significativo. De los resultados obtenidos se puede concluir que el uso combinado de lactaciones más largas y jaulas con mayor superficie disponible con una plataforma elevada podría ser una alternativa para mejorar el bienestar animal en determinadas situaciones productivas. ABSTRACT The general aim of this PhD Thesis was to evaluate new housing and husbandry systems of farmed rabbits, studying behavioral (experiment 1), productive and reproductive (experiment 3) parameters. Moreover, different sampling techniques were evaluated in order to optimize the assessment of rabbit behaviour (experiment 2). In experiment 1, the behaviour of rabbit does housed in two different types of cage (TC), conventional vs. alternative with an elevated platform, at different physiological stages (PS), lactation and gestation was to study. Behavioural observations were carried out on 12 commercial rabbit does using continuous 24 hour video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (57.7 %, as average). However, due to the use of platforms (23.0% of time, as average), lactating does spent 36.6% less time (P<0.001) on foot mats and gestating does spent 27.0% less (P<0.001) time on wire mesh in alternative cages than in conventional cages. Alternative cages allowed for standing posture but this behaviour was only observed in gestating does (4.6 times a day, as average). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Does’ behaviour was influenced by hour of day, being less active at the midday hours. During dark hours rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, independent of their physiological state, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kids trying to suckle. The use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. Stereotypies were not observed in any housing system, therefore conventional cages do not suggest lack of animal welfare. In experiment 2, it was compared the results of different simplified sampling methods of behavioural data with respect to reference records of 24-h in order to assess rabbit does behaviours at different physiological stages (gestation and lactation) in animals housed in two types of cages (conventional and alternative). A total of 576 h of continuous video of 12 rabbit does at the end of lactation and on the same females after weaning were analysed. The behavioural observations were studied using three independent categories of classification (location in the cage, posture and functional behaviours). Continuous behavioural recordings of 24 h were considered as the reference method to validate another 4 sampling methods of data collection by aggregated video recordings of different frequency and duration (regular short and long methods with 2.4 and 8 h of observation respectively, and irregular short and long methods with 6 and 8 h of observation, respectively). The current results showed that, independently of housing system, the best method to reduce the total observation time required to assess rabbit does behaviour depends on the trait studied and physiological stage of does. In gestating does, irregular methods were not suitable to estimate behaviours of long duration such as lying, sitting, resting and grooming. However, in both physiological stages, regular methods were accurate for location behaviours, postures and functional behaviours of long duration. Instead, for the study of infrequent behaviours performed mainly during dark period, where coefficients of variation were high, the irregular long method led to the lowest mean estimation errors. In experiment 3, the effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cages were weaned at 32 and the other half at 46 days after parturition. Longer lactations affected negatively to body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9 %) and litter weight (by 11.3 %) at the end of growing period and lower feed conversion ratio per cage during the overall experimental period (13.5 %) than standard weaning (P<0.001). These results were parallels to a lower mortality (12.6 vs 17.6 %; P<0.05) of young rabbit weaned later during the overall experimental period. Differences in performances at different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five firsts reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio were 4.2 % higher (P<0.001) and 5.0 % lower (P<0.005) in animals housed in alternative than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01); however, this effect was influenced by density reached in each cycle, as when the density of animals was lower than 40 kg/m2 (cycles three and five), the difference of litter weight between alternative and conventional cages was not significant. From the results obtained it can be concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be an alternative to improve animal welfare in some productive situations.

Bóvedas sexpartitas : los orígenes del gótico

Uno de los capítulos más interesantes del gótico europeo lo constituyen las bóvedas sexpartitas, sin lugar a dudas una de las bóvedas más singulares jamás creadas dentro de este estilo. Las primeras bóvedas góticas, en cruce de ojivas y de planta cuadrada, limitaban su uso a espacios relativamente pequeños, pero ante la necesidad de cubrir espacios de considerables dimensiones, apareció una nueva bóveda de características muy peculiares; la sexpartita. Esta bóveda en cruce de ojivas está reforzada por el centro con un arco paralelo a los arcos fajones que la divide por la mitad y que fragmenta el arco formero en dos, creando una pareja de ventanales en cada lado. La sencilla superficie en bóveda de arista, en el origen de las bóvedas de crucería, se complica extraordinariamente creando una volumetría de gran complejidad con seis cuarteles de plementería y con seis apoyos de distinto tamaño, cuatros esquineros y dos centrales más pequeños. Las dificultades que implica la construcción de este tipo de bóvedas explican quizás su abandono prematuro y la vuelta a la bóveda de crucería simple, ahora de tramos rectangulares. No obstante, a pesar de su corta existencia, la bóveda sexpartita fue la gran protagonista de los inicios del gótico y con ella se llevaron a cabo importantes abovedamientos, desde Inglaterra hasta Rumanía. La disciplina de la Historia de la Construcción se vio extraordinariamente favorecida por los estudios realizados en el siglo XIX, sin embargo su investigación se abandona durante el siglo XX para ser recuperada recientemente. Viollet-le-Duc, a finales del s. XIX, hace una sucinta explicación de este tipo de bóvedas. También Auguste Choisy, más tarde, dedica unas páginas a la bóveda sexpartita francesa; desde entonces, este tema, ha merecido escasísimas referencias en los estudios posteriores. Esta investigación se enmarca en este contexto y pretende poner de manifiesto los conocimientos geométricos y constructivos que hicieron posible la realización de las bóvedas sexpartitas europeas. Para ello se ha llevado a cabo la investigación de las principales bóvedas en Europa occidental; Francia, España, Inglaterra, Alemania, Suiza e Italia. Su estudio comparativo nos ha permitido poner de manifiesto sus características constructivas comunes y aquellos aspectos propios de cada país, así como algunos de los canales de comunicación que permitieron la expansión de esta arquitectura. Las nuevas tecnologías de medición, el escáner láser, la estación total, la fotogrametría, etc., han supuesto una revolución para la documentación y restauración del Patrimonio y un salto cualitativo formidable para el análisis de las bóvedas góticas, permitiendo estudios de la arquitectura histórica hasta ahora inabordables. Para realizar el análisis de las bóvedas sexpartitas europeas se ha llevado a cabo un levantamiento exhaustivo de las mismas, lo que ha permitido definir su despiece, obteniendo la forma de la talla de cada uno de los elementos constructivos que la componen; jarjas, dovelas, claves y plementería. La obtención de estos datos nos ha permitido abordar un profundo estudio de su estereotomía y construcción, aportando datos inéditos hasta el momento. Por otro lado se ha llevado a cabo la detección y catalogación de las principales bóvedas sexpartitas que aún se conservan en Europa. Los estudios realizados nos permiten afirmar que la bóveda sexpartita surge en Francia en la segunda mitad del siglo XII, utilizándose en las principales catedrales francesas, como Notre Dame de Paris, Bourges o Laon. A comienzos del siglo XIII cae en desuso en Francia y comienza su expansión por el resto de Europa, donde se abandona medio siglo después, desapareciendo definitivamente del gótico europeo. Mientras que los ejemplos que datan del siglo XII muestran soluciones escasamente desarrolladas y propias del románico, las bóvedas construidas en el siglo XIII muestran soluciones enormemente complejas, con grandes jarjamentos e inteligentes estrategias constructivas y geométricas que permiten la simplificación de sus estructuras auxiliares y una mayor libertad en su diseño. Estas bóvedas son el reflejo del desarrollo de la estereotomía gótica en sus comienzos por lo que su estudio nos ha permitido conocer el desarrollo y la evolución del gótico primitivo en Europa. ABSTRACT One of the most interesting chapters of European Gothic is the sexpartite vault, without doubt one of the most remarkable vaults ever created within this style. The first Gothic vaults, with crossed ribs on a square base, were restricted to relatively small areas, but a new vault, with very particular characteristics emerged to address the need to cover spaces of considerable size; the sexpartite vault. This cross-ribbed vault is reinforced in the centre by an arch that runs parallel to the transverse arches, divides the vault in half and splits the wall arch in two, creating a pair of windows, one on each side. The simple groin vault surface, the source of ribbed vaults, was greatly complicated creating a highly complex volume with six sections of severies and with six supports of different sizes, four on the corners and two smaller central ones. The construction difficulties involved in building this type of vault may explain its premature abandonment and a return to the simple cross-ribbed vault, now in rectangular sections. However, despite its brief existence, the sexpartite vault was the great protagonist of the beginnings of Gothic architecture and important vaulting was built using this system from England to Romania. Studies undertaken in the 19th century helped the History of Construction as a discipline tremendously. Research was abandoned during the twentieth century however, and has only recently been taken up again. Towards the end of the 19th century, Viollet-le-Duc gave a brief description of this type of vault. Later, Auguste de Choisy also devoted some pages to the French sexpartite vault; since then, later studies have made very few references to it. Against this background, this research now attempts to bring to light the knowledge of geometry and construction that made the construction of the European sexpartite vault possible. To this end, the main vaults in Western Europe - France, Spain, England, Germany, Switzerland and Italy, have been studied. By making a comparative study we have been able to reveal the common construction features and those that are specific to each country, as well as some of the channels of communication that enabled this architecture to spread. New measuring technologies, the laser scanner, total station, photogrammetry, etc., have given rise to a revolution in heritage documentation and restoration, as well as facilitating a huge qualitative leap for the analysis of Gothic vaults, enabling studies of historical architecture that until now were inaccessible. A comprehensive survey was carried out to be able to analyse European sexpartite vaults. We could thus create an exploded view, which enabled us to obtain the form of each of the elements; tas-de-charges, voussoirs, keystones and severies. The data gathered provided previously unknown facts that enabled us to make an in-depth study of stereotomy and construction. Furthermore, the main sexpartite vaults still preserved in Europe have been identified and categorised. The studies undertaken allowed us to affirm that the sexpartite vault appeared in France in the second half of the twelfth century, being used in the main French cathedrals, such as Notre Dame de Paris, Bourges or Laon. At the beginning of the thirteenth century it fell into disuse in France and began to expand throughout the rest of Europe, where it was abandoned half a century later, disappearing from European Gothic for good. While the examples dating back to the 12th century display poorly developed solutions more characteristic of the Romanesque, the vaults built in the 13th century reveal enormously complex solutions, with large tas-de-charges and intelligent construction and geometric strategies that allowed auxiliary support structures to be simplified, and gave more freedom to design. These vaults reflect the beginnings of Gothic stereotomy and by studying them we have been able to learn more about the development and evolution of Early Gothic architecture in Europe.