Bioavailability and extraction of heavy metals from contaminated soil by Atriplex halimus

Pot experiments were performed to evaluate the phytoremediation capacity of plants of Atriplex halimus grown in contaminated mine soils and to investigate the effects of organic amendments on the metal bioavailability and uptake of these metals by plants. Soil samples collected from abandoned mine sites north of Madrid (Spain) were mixed with 0, 30 and 60 Mg ha?1 of two organic amendments, with different pH and nutrients content: pine-bark compost and horse- and sheep-manure compost. The increasing soil organic matter content and pH by the application of manure amendment reduced metal bioavailability in soil stabilising them. The proportion of Cu in the most bioavailable fractions (sum of the water-soluble, exchangeable, acid-soluble and Fe?Mn oxides fractions) decreased with the addition of 60 Mg ha?1 of manure from 62% to 52% in one of the soils studied and from 50% to 30% in the other. This amendment also reduced Zn proportion in water-soluble and exchangeable fractions from 17% to 13% in one of the soils. Manure decreased metal concentrations in shoots of A. halimus, from 97 to 35 mg kg?1 of Cu, from 211 to 98 mg kg?1 of Zn and from 1.4 to 0.6 mg kg?1 of Cd. In these treatments there was a higher plant growth due to the lower metal toxicity and the improvement of nutrients content in soil. This higher growth resulted in a higher total metal accumulation in plant biomass and therefore in a greater amount of metals removed from soil, so manure could be useful for phytoextraction purposes. This amendment increased metal accumulation in shoots from 37 to 138 mg pot?1 of Cu, from 299 to 445 mg pot?1 of Zn and from 1.8 to 3.7 mg pot?1 of Cd. Pine bark amendment did not significantly alter metal availability and its uptake by plants. Plants of A. halimus managed to reduce total Zn concentration in one of the soils from 146 to 130 mg kg?1, but its phytoextraction capacity was insufficient to remediate contaminated soils in the short-to-medium term. However, A. halimus could be, in combination with manure amendment, appropriate for the phytostabilization of metals in mine soils.

Geotechnical Analysis of Contaminated Sand by Light Non-Aquous Phase Liquids

Contaminated soil reuse was investigated, with higher profusion, throughout the early 90’s, coinciding with the 1991 Gulf War, when efforts to amend large crude oil releases began in geotechnical assessment of contaminated soils. Isolated works referring to geotechnical testing with hydrocarbon ground contaminants are described in the state-of-the-art, which have been extended to other type of contaminated soil references. Contaminated soils by light non-aquous phase liquids (LNAPL) bearing capacity reduction has been previously investigated from a forensic point of view. To date, all the research works have been published based on the assumption of constant contaminant saturation for the entire soil mass. In contrast, the actual LNAPLs distribution plumes exhibit complex flow patterns which are subject to physical and chemical changes with time and distance travelled from the release source. This aspect has been considered along the present text. A typical Madrid arkosic soil formation is commonly known as Miga sand. Geotechnical tests have been carried out, with Miga sand specimens, in incremental series of LNAPL concentrations in order to observe the soil engineering properties variation due to a contamination increase. Results are discussed in relation with previous studies and as a matter of fact, soil mechanics parameters change in the presence of LNAPL, showing different tendencies according to each test and depending on the LNAPL content, as well as to the specimen’s initially planned relative density, dense or loose. Geotechnical practical implications are also commented on and analyzed. Variation on geotechnical properties may occur only within the external contour of contamination distribution plume. This scope has motivated the author to develop a physical model based on transparent soil technology. The model aims to reproduce the distribution of LNAPL into the ground due to an accidental release from a storage facility. Preliminary results indicate that the model is a potentially complementary tool for hydrogeological applications, site-characterization and remediation treatment testing within the framework of soil pollution events. A description of the test setup of an innovative three dimensional physical model for the flow of two or more phases, in porous media, is presented herein, along with a summary of the advantages, limitations and future applications for modeling with transparent material. En los primeros años de la década de los años 90, del siglo pasado, coincidiendo con la Guerra del Golfo en 1991, se investigó intensamente sobre la reutilización de suelos afectados por grandes volúmenes de vertidos de crudo, fomentándose la evaluación geotécnica de los suelos contaminados. Se describen, en el estado del arte de esta tésis, una serie de trabajos aislados en relación con la caracterización geotécnica de suelos contaminados con hidrocarburos, descripción ampliada mediante referencias relacionadas con otros tipos de contaminación de suelos. Existen estudios previos de patología de cimentaciones que analizan la reducción de la capacidad portante de suelos contaminados por hidrocarburos líquidos ligeros en fase no acuosa (acrónimo en inglés: LNAPL de “Liquid Non-Aquous Phase Liquid”). A fecha de redacción de la tesis, todas las publicaciones anteriores estaban basadas en la consideración de una saturación del contaminante constante en toda la extensión del terreno de cimentación. La distribución real de las plumas de contaminante muestra, por el contrario, complejas trayectorias de flujo que están sujetas a cambios físico-químicos en función del tiempo y la distancia recorrida desde su origen de vertido. Éste aspecto ha sido considerado y tratado en el presente texto. La arena de Miga es una formación geológica típica de Madrid. En el ámbito de esta tesis se han desarrollado ensayos geotécnicos con series de muestras de arena de Miga contaminadas con distintas concentraciones de LNAPL con el objeto de estimar la variación de sus propiedades geotécnicas debido a un incremento de contaminación. Se ha realizado una evaluación de resultados de los ensayos en comparación con otros estudios previamente analizados, resultando que las propiedades mecánicas del suelo, efectivamente, varían en función del contenido de LNAPL y de la densidad relativa con la que se prepare la muestra, densa o floja. Se analizan y comentan las implicaciones de carácter práctico que supone la mencionada variación de propiedades geotécnicas. El autor ha desarrollado un modelo físico basado en la tecnología de suelos transparentes, considerando que las variaciones de propiedades geotécnicas únicamente deben producirse en el ámbito interior del contorno de la pluma contaminante. El objeto del modelo es el de reproducir la distribución de un LNAPL en un terreno dado, causada por el vertido accidental de una instalación de almecenamiento de combustible. Los resultados preliminares indican que el modelo podría emplearse como una herramienta complementaria para el estudio de eventos contaminantes, permitiendo el desarrollo de aplicaciones de carácter hidrogeológico, caracterización de suelos contaminados y experimentación de tratamientos de remediación. Como aportación de carácter innovadora, se presenta y describe un modelo físico tridimensional de flujo de dos o más fases a través de un medio poroso transparente, analizándose sus ventajas e inconvenientes así como sus limitaciones y futuras aplicaciones.

Modelización de un proceso de biorremediación de suelos contaminados con gasoil

El objeto de esta tesis doctoral es encontrar, mediante herramientas estadísticas, un modelo matemático que prediga la evolución temporal de las concentraciones de los hidrocarburos totales del petróleo (TPH) en un proceso de biorremediación de suelos contaminados con gasoleo. Obtenido el modelo matemático realizar las comparaciones pertinentes para determinar la eficiencia de distintos tratamientos, la influencia tanto del suelo como del nivel de concentración. Para cumplir este objetivo se realizó un diseño de experimentos que tomaba en cuenta dos tipos de suelos, dos niveles de concentración de hidrocarburo y seis tratamientos. Se realizaron en total 1824 ensayos en laboratorio repartidos en 8 campañas de campo durante un año de experiencia tanto en parcelas de 4 x 4 m como en microcosmos. Los resultados obtenidos muestran que el proceso de biorremediación se puede ajustar a un comportamiento exponencial, que es una ecuación de cinética de primer orden, y que las comparaciones realizadas han mostrado resultados satisfactorios de la eficiencia de algunos tratamientos. ABSTRACT The purpose of this thesis is using statistical tools find a mathematical model to predict the time evolution of the total petroleum hydrocarbons (TPH) concentrations in the bioremediation process of diesel contaminated soil. Retrieved mathematical model make relevant comparisons to determine the efficiency of different treatments and the influence of both soil and concentration levels. To achieve this goal a design of experiments was developed, it took into account two types of soil, two concentration levels of hydrocarbon and six treatments. There were a total of 1824 laboratory tests spread over 8 field campaigns during a year of experience in both plots of 4 x 4 m in microcosm. The results obtained show that the bioremediation process can be adjusted to an exponential model, it is an equation of kinetic of first order and that the comparisons have shown satisfactory results of the efficiency of some treatments.

Estudio de la movilidad que presenta el diésel en un suelo contaminado empleando surfactantes

La contaminación de suelos con hidrocarburos de petróleo en México es un problema que se ha vuelto muy común en nuestros días, debido principalmente a derrames, así como a las actividades propias de la industria petrolera. Algunos suelos contaminados, principalmente en el sureste de México, contienen concentraciones de hidrocarburos hasta de 450,000 mg/kg. Por dichas razones, una de las preocupaciones de las autoridades ambientales es el desarrollo de tecnologías eficientes y económicamente factibles que permitan la eliminación de este tipo de contaminantes. El saneamiento del sitio se puede lograr a través de diversos procedimientos, como son la aplicación de métodos físicos, químicos y biológicos (o combinaciones de ellas). La elección de un método depende de la naturaleza del contaminante, su estado físico, concentración, tipo de suelo, espacio físico disponible, tiempo destinado para su tratamiento, así como de los recursos económicos disponibles. Previa a la aplicación de la tecnología es necesario la realización de un diagnóstico de la contaminación del suelo, con el fin de conocer el tipo, concentración y distribución de los contaminantes presentes, así como el volumen de suelo a tratar, las condiciones climáticas de la zona, y características físicas del lugar (vías de acceso y servicios, entre otros). En la presente tesis, el empleo de surfactantes, se ha propuesto como una técnica para incrementar la movilidad de contaminantes orgánicos hidrofóbicos (HOCs) como hidrocarburos totales del petróleo (HTPs), bifenilos policlorados (PCBs), Benceno, Tolueno, Xilenos, explosivos, clorofenoles, pesticidas, entre otros, y así facilitar su degradación. Los surfactantes debido a que reducen la tensión superficial del agua, son moléculas formadas por grupos polares hidrofílicos y largas cadenas carbonadas hidrofóbicas. Sus grupos polares forman puentes hidrógeno con las moléculas de agua, mientras que las cadenas carbonadas se asocian a los hidrocarburos debido a interacciones hidrofóbicas que estos presentan. En soluciones acuosas, los surfactantes forman estructuras esféricas organizadas llamadas micelas. La solubilización de los contaminantes se lleva a cabo solamente cuando se forma la fase micelar, la cual se obtiene cuando la concentración del surfactante es superior a la concentración micelar crítica (CMC), es decir, arriba de la concentración de la cual el monómero se comienza a auto-agregar. La eficiencia de desorción de diésel por un surfactante depende de su naturaleza, de la dosis empleada, de la hidrofobicidad del contaminante, de la interacción surfactante-suelo y del tiempo de contacto surfactante-suelo. Sin embargo, la mejor eficiencia de desorción no está siempre relacionada con la mejor eficiencia de movilidad o solubilidad, debido principalmente a que el empleo de una alta concentración de surfactante puede inhibir la movilización. De acuerdo con información proporcionada por la Procuraduría Federal de Protección al Ambiente (PROFEPA), a la fecha no se ha llevado a cabo en México ninguna restauración de sitios específicamente contaminados con diésel, la técnica de lavado de suelos. Por lo anterior existe la necesidad de emplear la técnica de lavado de suelos ex situ. Específicamente en el suelo extraído de la ex refinería 18 de marzo ubicada en el Distrito Federal México y empleando una solución de surfactantes con agua desionizada, la cual consiste ponerlos en contacto con el suelo contaminado con diésel por medio de columnas de lavado cilíndricas, para lograr la remoción del contaminante. Se emplearon como surfactantes el lauril sulfato de sodio, lauril éter sulfato de sodio y Glucopon AV-100 a diferentes concentraciones de 0.5 a 4.0 [g/L], lográndose obtener una eficiencia del 80 % con este último surfactante. El lavado de suelos contaminados con diésel empleado surfactantes, es una tecnología que requiere que se profundice en el estudio de algunas variables como son el tipo de surfactante, concentración, tiempo de lavado, fenómenos de difusión, desorción, propiedades termodinámicas, entre otros. Los cuales determinarán el éxito o fracaso de la técnica empleada. Nowadays, soil pollution with oil in Mexico is a very common issue due mainly to both oil spill and oil activities. For example, mainly in the southeast area of Mexico, polluted soil contains high concentrations of hydrocarbons, up to 450,000 mg/kg. For these reasons, enviromental authorities have the concern in developing economically feasible and efficient technology that allow the elimination of these type of contaminants. The sanitation in sites can be achieved through several procedures such as physical, chemical and biological methods (or a combination among them). The choice of a method depends on the nature and physical state of the contaminant, the concentration, type of soil, physical space available, time consumption and financial resources. Before any technological application, a diagnostic of the polluted soil is necessary in order to know the type, concentration and distribution of contaminants as well as the soil volume, climatic conditions and physical features of the place (access routes and services, among others). In this thesis, surfactants has been proposed as a technique to increase the mobility of hydrophobic-organic contaminants (HOCs), e.g. total hydrocarbons of petroleum, polychlorinated biphenyls, benzene, toluene, xylenes, explosives, chlorophenols, pesticides, among others, and, hence, to facilitate degradation. Since surfactants reduce the water surface tension, they are molecules comprised of hydrophilic polar groups and long-hydrophobic carbon chains. Surfactant’s polar groups form hydrogen bonding with water molecules while carbon chains, i.e. hydrocarbon chains, have hydrophobic interactios. In aqueous solutions, surfactants form self-organised spherical structures called micelles. The solubilisation of contaminants is carried out only when the micellar phase is formed. This is obtained when the surfactant concentration is higher than the crítical micelle concentration (CMC), i.e. above the concentration where the surfactant monomer begins to self-aggregate. The diesel efficiency desorption by surfactants depends on their nature, the dose use, the contaminant hydrophobicity, the surfactant-soil interaction and the contact time with surfactant soil. However, the best desorption is not always related with the best either mobility or solubility efficiency since high concentration of surfactant can inhibit mobilisation. According to information of the Federal Bureau of Environmental Protection (PROFEPA), up today, there is not any restauration of diesel-polluted sites using the washing-soil technique. Due to the above, there exist the necessity of employing the waching-soil technique ex situ. More specifically, a sample soil from the oil-refinery of “18 de marzo” in Mexico city was extracted and a surfactant solution with deionised water was put in contact with the diesel contaminated soil by means of cylindrical waching columns in order to remove the contaminant. The surfactants employed in this work were sodium lauryl sulfate, sodium lauryl ether sulfate and Glucopon AV-100 at different concentrations of 0.5 to 4 [g/L], obtaining a efficiency of 80 % with this last surfactant. The washing of diesel-polluted soil using surfactants is a technology which requires a deeper study of some variables such as the type of surfactant, concentration, washing time, difusión phenomena, desorption, thermodynamic properties, among others. These parameters determine the succes or failure of the employed technique.

Chemical speciation and mobilization of copper and zinc in naturally contaminated mine soils with citric and tartaric acids

A one-step extraction procedure and a leaching column experiment were performed to assess the effects of citric and tartaric acids on Cu and Zn mobilization in naturally contaminated mine soils to facilitate assisted phytoextraction. A speciation modeling of the soil solution and the metal fractionation of soils were performed to elucidate the chemical processes that affected metal desorption by organic acids. Different extracting solutions were prepared, all of which contained 0.01 M KNO3 and different concentrations of organic acids: control without organic acids, 0.5 mM citric, 0.5 mM tartaric, 10 mM citric, 10 mM tartaric, and 5 mM citric +5 mM tartaric. The results of the extraction procedure showed that higher concentrations of organic acids increased metal desorption, and citric acid was more effective at facilitating metal desorption than tartaric acid. Metal desorption was mainly influenced by the decreasing pH and the dissolution of Fe and Mn oxides, not by the formation of soluble metal–organic complexes as was predicted by the speciation modeling. The results of the column study reported that low concentrations of organic acids did not significantly increase metal mobilization and that higher doses were also not able to mobilize Zn. However, 5–10 mM citric acid significantly promoted Cu mobilization (from 1 mg kg−1 in the control to 42 mg kg−1 with 10 mM citric acid) and reduced the exchangeable (from 21 to 3 mg kg−1) and the Fe and Mn oxides (from 443 to 277 mg kg−1) fractions. Citric acid could efficiently facilitate assisted phytoextraction techniques.

Effects of sheep and horse manure and pine bark amendments on metal distribution and chemical properties of contaminated mine soils.

Mine soils usually contain large levels of heavy metals and poor fertility conditions which limit their reclamation and the application of phyto-remediation technologies. Two organic waste materials (pine bark compost and sheep and horse manure compost), with different pHs and varying degrees of humification and nutrient contents, were applied as amendments to assess their effects on copper (Cu) and zinc (Zn) bioavailability and on fertility conditions of mine soils. Soil samples collected from two abandoned mining areas near Madrid (Spain) were mixed with 0, 30 and 60 t ha?1 of the organic amendments. The concentrations of metals among the different mineral and organic fractions of soil were determined by several extraction procedures to study the metal distribution in the solid phase of the soil affected by the organic amendments. The results showed that the manure amendment increased the soil pH and the cation exchange capacity and enhanced the nutrient levels of these soils. The pine bark amendment decreased the soil pH and did not significantly change the nutrient status of soil. Soil pH, organic matter content and its degree of humification, which were altered by the amendments, were the main factors affecting Cu fractionation. Zn fractionation was mainly affected by soil pH. The addition of manure not only improved soil fertility, but also decreased metal bioavailability resulting in a reduction of metal toxicity. Conversely, pine bark amendment increased metal ioavailability. The use of sheep and horse manure could be a cost-effective practice for the restoration of contaminated mine soils.

Remediation of crude oil contaminated soils by means of bitumen emulsions

Effective remediation of contaminated sites with oils, heavy metals and other chemical agents is one of the most important environmental problems all over the world. Contaminated soils by petroleum from different sites and origins, might contaminate groundwater aquifers and then be spread by rain. Many years and the requirement of remedial techniques may be needed to remediate them. However, previous experiences show the uselessness of these methods for the solution of all problems. As any case of soil contamination is different, specific studies with relevant factors at financial aspects, legal limits and waste and soil characteristics are needed. In this work, a study of the use of bitumen asphalt emulsion to remediate contaminated soils by crude oils is exposed. By means of the soil stabilization technology, using the contaminated soils as aggregates and the tailor made emulsion as binder, the feasibility of the mix application to produce stable and resistant pavements is demonstrated

Effects of soluble humic acids on the uptake of heavy metals by Vetiveria zizanioides (L.) Nash in contaminated mining soils

In the past, mining wastes were left wherever they might lie in the surroundings of the mine area. Unfortunately, inactive and abandoned mines continue to pollute our environment, reason why these sites should be restored with minimum impact. Phytoextraction is an environmental-friendly and cost-effective technology less harmful than traditional methods that uses metal hyperaccumulator or at least tolerant plants to extract heavy metals from polluted soils. One disadvantage of hyperaccumulator species is their slow growth rate and low biomass production. Vetiveria zizanioides (L.) Nash, perennial species adapted to Mediterranean climate has a strong root system which can reach up to 3 m deep, is fast growing, and can survive in sites with high metal levels (Chen et al., 2004). Due to the fact that metals in abandoned mine tailings become strongly bonded to soil solids, humic acids used as chelating agents could increase metal bioavailability (Evangelou et al., 2004; Wilde et al., 2005) and thereby promote higher accumulation in the harvestable parts of the plant. The objective of this study was to examine the performance of humic acid assisted phytoextraction using Vetiveria zizanioides (L.) Nash in heavy metals contaminated soils.

Spatio-temporal distribution of pyrethroids in soil in Mediterranean paddy fields

Purpose The demand of rice by the increase in population in many countries has intensified the application of pesticides and the use of poor quality water to irrigate fields. The terrestrial environment is one compartment affected by these situations, where soil is working as a reservoir, retaining organic pollutants. Therefore, it is necessary to develop methods to determine insecticides in soil and monitor susceptible areas to be contaminated, applying adequate techniques to remediate them. Materials and methods This study investigates the occurrence of ten pyrethroid insecticides (PYs) and its spatio-temporal variance in soil at two different depths collected in two periods (before plow and during rice production), in a paddy field area located in the Mediterranean coast. Pyrethroids were quantified using gas chromatography?mass spectrometry (GC?MS) after ultrasound-assisted extraction with ethyl acetate. The results obtained were assessed statistically using non-parametric methods, and significant statistical differences (p < 0.05) in pyrethroids content with soil depth and proximity to wastewater treatment plants were evaluated. Moreover, a geographic information system (GIS) was used to monitor the occurrence of PYs in paddy fields and detect risk areas. Results and discussion Pyrethroids were detected at concentrations ?57.0 ng g?1 before plow and ?62.3 ng g?1 during rice production, being resmethrin and cyfluthrin the compounds found at higher concentrations in soil. Pyrethroids were detected mainly at the top soil, and a GIS program was used to depict the obtained results, showing that effluents from wastewater treatment plants (WWTPs) were the main sources of soil contamination. No toxic effects were expected to soil organisms, but it is of concern that PYs may affect aquatic organisms, which represents the worst case scenario. Conclusions A methodology to determine pyrethroids in soil was developed to monitor a paddy field area. The use of water fromWWTPs to irrigate rice fields is one of the main pollution sources of pyrethroids. It is a matter of concern that PYs may present toxic effects on aquatic organisms, as they can be desorbed from soil. Phytoremediation may play an important role in this area, reducing the possible risk associated to PYs levels in soil.