Estudio de calidad de codificación utilizando los perfiles 10 Bits del estándar H.264

Desde los inicios de la codificación de vídeo digital hasta hoy, tanto la señal de video sin comprimir de entrada al codificador como la señal de salida descomprimida del decodificador, independientemente de su resolución, uso de submuestreo en los planos de diferencia de color, etc. han tenido siempre la característica común de utilizar 8 bits para representar cada una de las muestras. De la misma manera, los estándares de codificación de vídeo imponen trabajar internamente con estos 8 bits de precisión interna al realizar operaciones con las muestras cuando aún no se han transformado al dominio de la frecuencia. Sin embargo, el estándar H.264, en gran auge hoy en día, permite en algunos de sus perfiles orientados al mundo profesional codificar vídeo con más de 8 bits por muestra. Cuando se utilizan estos perfiles, las operaciones efectuadas sobre las muestras todavía sin transformar se realizan con la misma precisión que el número de bits del vídeo de entrada al codificador. Este aumento de precisión interna tiene el potencial de permitir unas predicciones más precisas, reduciendo el residuo a codificar y aumentando la eficiencia de codificación para una tasa binaria dada. El objetivo de este Proyecto Fin de Carrera es estudiar, utilizando las medidas de calidad visual objetiva PSNR (Peak Signal to Noise Ratio, relación señal ruido de pico) y SSIM (Structural Similarity, similaridad estructural), el efecto sobre la eficiencia de codificación y el rendimiento al trabajar con una cadena de codificación/descodificación H.264 de 10 bits en comparación con una cadena tradicional de 8 bits. Para ello se utiliza el codificador de código abierto x264, capaz de codificar video de 8 y 10 bits por muestra utilizando los perfiles High, High 10, High 4:2:2 y High 4:4:4 Predictive del estándar H.264. Debido a la ausencia de herramientas adecuadas para calcular las medidas PSNR y SSIM de vídeo con más de 8 bits por muestra y un tipo de submuestreo de planos de diferencia de color distinto al 4:2:0, como parte de este proyecto se desarrolla también una aplicación de análisis en lenguaje de programación C capaz de calcular dichas medidas a partir de dos archivos de vídeo sin comprimir en formato YUV o Y4M. ABSTRACT Since the beginning of digital video compression, the uncompressed video source used as input stream to the encoder and the uncompressed decoded output stream have both used 8 bits for representing each sample, independent of resolution, chroma subsampling scheme used, etc. In the same way, video coding standards force encoders to work internally with 8 bits of internal precision when working with samples before being transformed to the frequency domain. However, the H.264 standard allows coding video with more than 8 bits per sample in some of its professionally oriented profiles. When using these profiles, all work on samples still in the spatial domain is done with the same precision the input video has. This increase in internal precision has the potential of allowing more precise predictions, reducing the residual to be encoded, and thus increasing coding efficiency for a given bitrate. The goal of this Project is to study, using PSNR (Peak Signal to Noise Ratio) and SSIM (Structural Similarity) objective video quality metrics, the effects on coding efficiency and performance caused by using an H.264 10 bit coding/decoding chain compared to a traditional 8 bit chain. In order to achieve this goal the open source x264 encoder is used, which allows encoding video with 8 and 10 bits per sample using the H.264 High, High 10, High 4:2:2 and High 4:4:4 Predictive profiles. Given that no proper tools exist for computing PSNR and SSIM values of video with more than 8 bits per sample and chroma subsampling schemes other than 4:2:0, an analysis application written in the C programming language is developed as part of this Project. This application is able to compute both metrics from two uncompressed video files in the YUV or Y4M format.

MMonCa: A flexible and powerful new Kinetic Monte Carlo simulator

Kinetic Monte Carlo (KMC) is a widely used technique to simulate the evolution of radiation damage inside solids. Despite de fact that this technique was developed several decades ago, there is not an established and easy to access simulating tool for researchers interested in this field, unlike in the case of molecular dynamics or density functional theory calculations. In fact, scientists must develop their own tools or use unmaintained ones in order to perform these types of simulations. To fulfil this need, we have developed MMonCa, the Modular Monte Carlo simulator. MMonCa has been developed using professional C++ programming techniques and has been built on top of an interpreted language to allow having a powerful yet flexible, robust but customizable and easy to access modern simulator. Both non lattice and Lattice KMC modules have been developed. We will present in this conference, for the first time, the MMonCa simulator. Along with other (more detailed) contributions in this meeting, the versatility of MMonCa to study a number of problems in different materials (particularly, Fe and W) subject to a wide range of conditions will be shown. Regarding KMC simulations, we have studied neutron-generated cascade evolution in Fe (as a model material). Starting with a Frenkel pair distribution we have followed the defect evolution up to 450 K. Comparison with previous simulations and experiments shows excellent agreement. Furthermore, we have studied a more complex system (He-irradiated W:C) using a previous parametrization [1]. He-irradiation at 4 K followed by isochronal annealing steps up to 500 K has been simulated with MMonCa. The He energy was 400 eV or 3 keV. In the first case, no damage is associated to the He implantation, whereas in the second one, a significant Frenkel pair concentration (evolving into complex clusters) is associated to the He ions. We have been able to explain He desorption both in the absence and in the presence of Frenkel pairs and we have also applied MMonCa to high He doses and fluxes at elevated temperatures. He migration and trapping dominate the kinetics of He desorption. These processes will be discussed and compared to experimental results. [1] C.S. Becquart et al. J. Nucl. Mater. 403 (2010) 75

Posibilidades del motor 3D de la Nintendo DS

La consola portátil Nintendo DS es una plataforma de desarrollo muy presente entre la comunidad de desarrolladores independientes, con una extensa y nutrida escena homebrew. Si bien las capacidades 2D de la consola están muy aprovechadas, dado que la mayor parte de los esfuerzos de los creadores amateur están enfocados en este aspecto, el motor 3D de ésta (el que se encarga de representar en pantalla modelos tridimensionales) no lo está de igual manera. Por lo tanto, en este proyecto se tiene en vista determinar las capacidades gráficas de la Nintendo DS. Para ello se ha realizado una biblioteca de funciones en C que permite aprovechar las posibilidades que ofrece la consola en el terreno 3D y que sirve como herramienta para la comunidad homebrew para crear aplicaciones 3D de forma sencilla, dado que se ha diseñado como un sistema modular y accesible. En cuanto al proceso de renderizado se han sacado varias conclusiones. En primer lugar se ha determinado la posibilidad de asignar varias componentes de color a un mismo vértice (color material reactivo a la iluminación, color por vértice directo y color de textura), tanto de forma independiente como simultáneamente, pudiéndose utilizar para aplicar diversos efectos al modelo, como iluminación pre-calculada o simulación de una textura mediante color por vértice, ahorrando en memoria de video. Por otro lado se ha implementado un sistema de renderizado multi-capa, que permite realizar varias pasadas de render, pudiendo, de esta forma, aplicar al modelo una segunda textura mezclada con la principal o realizar un efecto de reflexión esférica. Uno de los principales avances de esta herramienta con respecto a otras existentes se encuentra en el apartado de animación. El renderizador desarrollado permite por un lado animación por transformación, consistente en la animación de mallas o grupos de vértices del modelo mediante el movimiento de una articulación asociada que determina su posición y rotación en cada frame de animación. Por otro lado se ha implementado un sistema de animación por muestreo de vértices mediante el cual se determina la posición de éstos en cada instante de la animación, generando frame a frame las poses que componen el movimiento (siendo este último método necesario cuando no se puede animar una malla por transformación). Un mismo modelo puede contener diferentes esqueletos, animados independientemente entre sí, y cada uno de ellos tener definidas varias costumbres de animación que correspondan a movimientos contextuales diferentes (andar, correr, saltar, etc). Además, el sistema permite extraer cualquier articulación para asociar su transformación a un objeto estático externo y que éste siga el movimiento de la animación, pudiendo así, por ejemplo, equipar un objeto en la mano de un personaje. Finalmente se han implementado varios efectos útiles en la creación de escenas tridimensionales, como el billboarding (tanto esférico como cilíndrico), que restringe la rotación de un modelo para que éste siempre mire a cámara y así poder emular la apariencia de un objeto tridimensional mediante una imagen plana, ahorrando geometría, o emplearlo para realizar efectos de partículas. Por otra parte se ha implementado un sistema de animación de texturas por subimágenes que permite generar efectos de movimiento mediante imágenes, sin necesidad de transformar geometría. ABSTRACT. The Nintendo DS portable console has received great interest within the independent developers’ community, with a huge homebrew scene. The 2D capabilities of this console are well known and used since most efforts of the amateur creators has been focused on this point. However its 3D engine (which handles with the representation of three-dimensional models) is not equally used. Therefore, in this project the main objective is to assess the Nintendo DS graphic capabilities. For this purpose, a library of functions in C programming language has been coded. This library allows the programmer to take advantage of the possibilities that the 3D area brings. This way the library can be used by the homebrew community as a tool to create 3D applications in an easy way, since it has been designed as a modular and accessible system. Regarding the render process, some conclusions have been drawn. First, it is possible to assign several colour components to the same vertex (material colour, reactive to the illumination, colour per vertex and texture colour), independently and simultaneously. This feature can be useful to apply certain effects on the model, such as pre-calculated illumination or the simulation of a texture using colour per vertex, providing video memory saving. Moreover, a multi-layer render system has been implemented. This system allows the programmer to issue several render passes on the same model. This new feature brings the possibility to apply to the model a second texture blended with the main one or simulate a spherical reflection effect. One of the main advances of this tool over existing ones consists of its animation system. The developed renderer includes, on the one hand, transform animation, which consists on animating a mesh or groups of vertices of the model by the movement of an associated joint. This joint determines position and rotation of the mesh at each frame of the animation. On the other hand, this tool also implements an animation system by vertex sampling, where the position of vertices is determined at every instant of the animation, generating the poses that build up the movement (the latter method is mandatory when a mesh cannot be animated by transform). A model can contain multiple skeletons, animated independently, each of them being defined with several animation customs, corresponding to different contextual movements (walk, run, jump, etc). Besides, the system allows extraction of information from any joint in order to associate its transform to a static external object, which will follow the movement of the animation. This way, any object could be equipped, for example, on the hand of a character. Finally, some useful effects for the creation of three-dimensional scenes have been implemented. These effects include billboarding (both spherical and cylindrical), which constraints the rotation of a model so it always looks on the camera's direction. This feature can provide the ability to emulate the appearance of a three-dimensional model through a flat image (saving geometry). It can also be helpful in the implementation of particle effects. Moreover, a texture animation system using sub-images has also been implemented. This system allows the generation of movement by using images as textures, without having to transform geometry.

Medida de distancia semántica en grafos UNL

El trabajo que se presenta a continuación desarrolla un modelo para calcular la distancia semántica entre dos oraciones representadas por grafos UNL. Este problema se plantea en el contexto de la traducción automática donde diferentes traductores pueden generar oraciones ligeramente diferentes partiendo del mismo original. La medida de distancia que se propone tiene como objetivo proporcionar una evaluación objetiva sobre la calidad del proceso de generación del texto. El autor realiza una exploración del estado del arte sobre esta materia, reuniendo en un único trabajo los modelos propuestos de distancia semántica entre conceptos, los modelos de comparación de grafos y las pocas propuestas realizadas para calcular distancias entre grafos conceptuales. También evalúa los pocos recursos disponibles para poder experimentar el modelo y plantea una metodología para generar los conjuntos de datos que permitirían aplicar la propuesta con el rigor científico necesario y desarrollar la experimentación. Utilizando las piezas anteriores se propone un modelo novedoso de comparación entre grafos conceptuales que permite utilizar diferentes algoritmos de distancia entre conceptos y establecer umbrales de tolerancia para permitir una comparación flexible entre las oraciones. Este modelo se programa utilizando C++, se alimenta con los recursos a los que se ha hecho referencia anteriormente, y se experimenta con un conjunto de oraciones creado por el autor ante la falta de otros recursos disponibles. Los resultados del modelo muestran que la metodología y la implementación pueden conducir a la obtención de una medida de distancia entre grafos UNL con aplicación en sistemas de traducción automática, sin embargo, la carencia de recursos y de datos etiquetados con los que validar el algoritmo requieren un esfuerzo previo importante antes de poder ofrecer resultados concluyentes.---ABSTRACT---The work presented here develops a model to calculate the semantic distance between two sentences represented by their UNL graphs. This problem arises in the context of machine translation where different translators can generate slightly different sentences from the same original. The distance measure that is proposed aims to provide an objective evaluation on the quality of the process involved in the generation of text. The author carries out an exploration of the state of the art on this subject, bringing together in a single work the proposed models of semantic distance between concepts, models for comparison of graphs and the few proposals made to calculate distances between conceptual graphs. It also assesses the few resources available to experience the model and presents a methodology to generate the datasets that would be needed to develop the proposal with the scientific rigor required and to carry out the experimentation. Using the previous parts a new model is proposed to compute differences between conceptual graphs; this model allows the use of different algorithms of distance between concepts and is parametrized in order to be able to perform a flexible comparison between the resulting sentences. This model is implemented in C++ programming language, it is powered with the resources referenced above and is experienced with a set of sentences created by the author due to the lack of other available resources. The results of the model show that the methodology and the implementation can lead to the achievement of a measure of distance between UNL graphs with application in machine translation systems, however, lack of resources and of labeled data to validate the algorithm requires an important effort to be done first in order to be able to provide conclusive results.

Exploración y evaluación de mecanismos para la captura de la posición y postura de personas en entornos reales

El presente trabajo consiste en el estudio de la viabilidad en el uso de tres posibles opciones orientadas a la captura de la posición y la postura de personas en entornos reales, así como el diseño e implementación de un prototipo de captura en cada uno de ellos. También se incluye una comparativa con el fin de destacar los pros y los contras de cada solución. Una de las alternativas para llevarlo a cabo consiste en un sistema de tracking óptico por infrarrojos de alta calidad y precisión, como es Optitrack; la segunda se basa en una solución de bajo coste como es el periférico Kinect de Microsoft y la tercera consiste en la combinación de ambos dispositivos para encontrar un equilibrio entre precisión y economía, tomando los puntos fuertes de cada uno para contrarrestar sus debilidades. Uno de los puntos importantes del trabajo es que el uso de los prototipos de captura está orientado a entornos de trabajo reales (en concreto en la captura de los movimientos del personal que trabaja en un quirófano), así que han sido necesarias pruebas para minimizar el efecto de las fuentes de luz en los sistemas de infrarrojos, el estudio de los dispositivos para determinar el número de personas que son capaces de capturar a la vez sin que esto afecte a su rendimiento y el nivel de invasión de los dispositivos en los trabajadores (marcadores para el tracking), además de los mecanismos apropiados para minimizar el impacto de las oclusiones utilizando métodos de interpolación y ayudándose del conocimiento del contexto, las restricciones de movimiento del cuerpo humano y la evolución en el tiempo. Se han desarrollado conocimientos en el funcionamiento y configuración dispositivos como el sistema de captura Optitrack de Natural Point y el sistema de detección de movimiento Kinect desarrollado por Microsoft. También se ha aprendido el funcionamiento del entorno de desarrollo y motor de videojuegos multiplataforma homónimos Unity y del lenguaje de programación C# que utiliza dicho entorno para sus scripts de control, así como los protocolos de comunicación entre los distintos sistemas que componen los prototipos como son VRPN y NatNet.---ABSTRACT---This project is about a viability study in the use of three possible options, oriented towards the capture of the position and view of people in a real environment, as well as the design and implementation of a capturing prototype in each of them. A comparative study is also included, in order to emphasise the pros and cons of each solution. One of the alternatives consists of an optical tracking system via high quality and precision infrareds, like Optitrack; the second is based on a low cost solution, such as Microsoft’s Kinect peripheral, and the third consists on a combination of both devices to find a balance between precision and price, taking the strong points of each of the mechanisms to make up for the weaknesses. One of the important parts of this project is that the use of the capturing prototypes is directed towards real life work situations (specifically towards the capturing of the movements of surgery personnel), so various tests have been necessary in order to minimize the effect of light sources in infrared systems, the study of the devices to determine the number of people that they are capable of capturing simultaneously without affecting their performance and the invasion level of the devices towards the workers (tracking markers), as well as the mechanisms adopted to minimize the impact of the occlusions using interpolation methods and with help of the knowledge of the surroundings, the human movement restrictions and the passing of time. Knowledge has been developed on the functioning and configuration of the devices such as Natural Point’s Optitrak capturing system, and the Kinect movement detection system developed by Microsoft. We have also learned about the operating of the development and incentive environment of multiplatform videogames of namesake Unity and of C# programming language, which uses said environment for its control scripts, as well as communication protocols between the different systems that make up prototypes like VRPN and NatNet.

A friendly online C compiler to improve programming skills based on student self-assessment

This paper presents an online C compiler designed so that students can program their practical assignments in Programming courses. What is really innovative is the self-assessment of the exercises based on black-box tests and train students’ skill to test software. Moreover, this tool lets instructors, not only proposing and classifying practical exercises, but also evaluating automatically the efforts dedicated and the results obtained by the students. The system has been applied to the 1st-year students at the Industrial Engineering specialization at the Universidad Politecnica de Madrid. Results show that the students obtained better academic performance, reducing the failure rate in the practical exam considerably with respect to previous years, in addition that an anonymous survey proved that students are satisfied with the system because they get instant feedback about their programs.

A flexible (C)LP-based approach to the analysis of object-oriented programs

Static analyses of object-oriented programs usually rely on intermediate representations that respect the original semantics while having a more uniform and basic syntax. Most of the work involving object-oriented languages and abstract interpretation usually omits the description of that language or just refers to the Control Flow Graph(CFG) it represents. However, this lack of formalization on one hand results in an absence of assurances regarding the correctness of the transformation and on the other it typically strongly couples the analysis to the source language. In this work we present a framework for analysis of object-oriented languages in which in a first phase we transform the input program into a representation based on Horn clauses. This allows on one hand proving the transformation correct attending to a simple condition and on the other being able to apply an existing analyzer for (constraint) logic programming to automatically derive a safe approximation of the semantics of the original program. The approach is flexible in the sense that the first phase decouples the analyzer from most languagedependent features, and correct because the set of Horn clauses returned by the transformation phase safely approximates the standard semantics of the input program. The resulting analysis is also reasonably scalable due to the use of mature, modular (C)LP-based analyzers. The overall approach allows us to report results for medium-sized programs.

Improving the compilation of prolog to C using type and determinism information: Preliminary results

We describe the current status of and provide preliminary performance results for a compiler of Prolog to C. The compiler is novel in that it is designed to accept different kinds of high-level information (typically obtained via an analysis of the initial Prolog program and expressed in a standardized language of assertions) and use this information to optimize the resulting C code, which is then further processed by an off-the-shelf C compiler. The basic translation process used essentially mimics an unfolding of a C-coded bytecode emúlator with respect to the particular bytecode corresponding to the Prolog program. Optimizations are then applied to this unfolded program. This is facilitated by a more flexible design of the bytecode instructions and their lower-level components. This approach allows reusing a sizable amount of the machinery of the bytecode emulator: ancillary pieces of C code, data definitions, memory management routines and áreas, etc., as well as mixing bytecode emulated code with natively compiled code in a relatively straightforward way We report on the performance of programs compiled by the current versión of the system, both with and without analysis information.

A system for automatically generating documentation for (C)LP programs

We describe lpdoc, a tool which generates documentation manuals automatically from one or more logic program source files, written in ISO-Prolog, Ciao, and other (C)LP languages. It is particularly useful for documenting library modules, for which it automatically generates a rich description of the module interface. However, it can also be used quite successfully to document full applications. A fundamental advantage of using lpdoc is that it helps maintaining a true correspondence between the program and its documentation, and also identifying precisely to what version of the program a given printed manual corresponds. The quality of the documentation generated can be greatly enhanced by including within the program text assertions (declarations with types, modes, etc.) for the predicates in the program, and machine-readable comments. One of the main novelties of lpdoc is that these assertions and comments are written using the Ciao system assertion language, which is also the language of communication between the compiler and the user and between the components of the compiler. This allows a significant synergy among specification, documentation, optimization, etc. A simple compatibility library allows conventional (C)LP systems to ignore these assertions and comments and treat normally programs documented in this way. The documentation can be generated in many formats including texinfo, dvi, ps, pdf, info, html/css, Unix nroff/man, Windows help, etc., and can include bibliographic citations and images. lpdoc can also generate “man” pages (Unix man page format), nicely formatted plain ascii “readme” files, installation scripts useful when the manuals are included in software distributions, brief descriptions in html/css or info formats suitable for inclusion in on-line indices of manuals, and even complete WWW and info sites containing on-line catalogs of documents and software distributions. The lpdoc manual, all other Ciao system manuals, and parts of this paper are generated by lpdoc.

A documentation generator for logic programming systems

We describe lpdoc, a tool which generates documentation manuals automatically from one or more logic program source files, written in ISO-Prolog, Ciao, and other (C)LP languages. It is particularly useful for documenting library modules, for which it automatically generates a rich description of the module interface. However, it can also be used quite successfully to document full applications. The documentation can be generated in many formats including t e x i n f o, dvi, ps, pdf, inf o, html/css, Unix nrof f/man, Windows help, etc., and can include bibliographic citations and images, lpdoc can also genérate "man" pages (Unix man page format), nicely formatted plain ascii "readme" files, installation scripts useful when the manuals are included in software distributions, brief descriptions in html/css or inf o formats suitable for inclusión in on-line Índices of manuals, and even complete WWW and inf o sites containing on-line catalogs of documents and software distributions. A fundamental advantage of using lpdoc is that it helps maintaining a true correspondence between the program and its documentation, and also identifying precisely to what versión of the program a given printed manual corresponds. The quality of the documentation generated can be greatly enhanced by including within the program text assertions (declarations with types, modes, etc. ...) for the predicates in the program, and machine-readable comments. These assertions and comments are written using the Ciao system assertion language. A simple compatibility library allows conventional (C)LP systems to ignore these assertions and comments and treat normally programs documented in this way. The lpdoc manual, all other Ciao system manuals, and most of this paper, are generated by lpdoc.

The CIAO Multi-Dialect Compiler and System: An Experimentation Workbench for Future (C)LP Systems

CIAO is an advanced programming environment supporting Logic and Constraint programming. It offers a simple concurrent kernel on top of which declarative and non-declarative extensions are added via librarles. Librarles are available for supporting the ISOProlog standard, several constraint domains, functional and higher order programming, concurrent and distributed programming, internet programming, and others. The source language allows declaring properties of predicates via assertions, including types and modes. Such properties are checked at compile-time or at run-time. The compiler and system architecture are designed to natively support modular global analysis, with the two objectives of proving properties in assertions and performing program optimizations, including transparently exploiting parallelism in programs. The purpose of this paper is to report on recent progress made in the context of the CIAO system, with special emphasis on the capabilities of the compiler, the techniques used for supporting such capabilities, and the results in the áreas of program analysis and transformation already obtained with the system.

The CIAO multi-dialect compiler and system: An experimentation workbench for future (C)LP systems

Abstract is not available.

An Introductory Course on Constraint Logic Programming

The purpose of this document is to serve as the printed material for the seminar "An Introductory Course on Constraint Logic Programming". The intended audience of this seminar are industrial programmers with a degree in Computer Science but little previous experience with constraint programming. The seminar itself has been field tested, prior to the writing of this document, with a group of the application programmers of Esprit project P23182, "VOCAL", aimed at developing an application in scheduling of field maintenance tasks in the context of an electric utility company. The contents of this paper follow essentially the flow of the seminar slides. However, there are some differences. These differences stem from our perception from the experience of teaching the seminar, that the technical aspects are the ones which need more attention and clearer explanations in the written version. Thus, this document includes more examples than those in the slides, more exercises (and the solutions to them), as well as four additional programming projects, with which we hope the reader will obtain a clearer view of the process of development and tuning of programs using CLP. On the other hand, several parts of the seminar have been taken out: those related with the account of fields and applications in which C(L)P is useful, and the enumerations of C(L)P tools available. We feel that the slides are clear enough, and that for more information on available tools, the interested reader will find more up-to-date information by browsing the Web or asking the vendors directly. More details in this direction will actually boil down to summarizing a user manual, which is not the aim of this document.

Lightweight compilation of (C)LP to JavaScript

We present and evaluate a compiler from Prolog (and extensions) to JavaScript which makes it possible to use (constraint) logic programming to develop the client side of web applications while being compliant with current industry standards. Targeting JavaScript makes (C)LP programs executable in virtually every modern computing device with no additional software requirements from the point of view of the user. In turn, the use of a very high-level language facilitates the development of high-quality, complex software. The compiler is a back end of the Ciao system and supports most of its features, including its module system and its rich language extension mechanism based on packages. We present an overview of the compilation process and a detailed description of the run-time system, including the support for modular compilation into separate JavaScript code. We demonstrate the maturity of the compiler by testing it with complex code such as a CLP(FD) library written in Prolog with attributed variables. Finally, we validate our proposal by measuring the performance of some LP and CLP(FD) benchmarks running on top of major JavaScript engines.

An automatic documentation generator for (C)LP - Reference manual

Lpdoc is an automatic program documentation generator for (C)LP systems. Lpdoc generates a reference manual automatically from one or more source files for a logic program (including ISO-Prolog, Ciao, many CLP systems, ...). It is particularly useful for documenting library modules, for which it automatically generates a description of the module interface. However, lpdoc can also be used quite successfully to document full applications and to generate nicely formatted plain ascii "readme" files. A fundamental advantage of using lpdoc to document programs is that it is much easier to maintain a true correspondence between the program and its documentation, and to identify precisely to what version of the program a given printed manual corresponds. The quality of the documentation generated can be greatly enhanced by including within the program text: • assertions (types, modes, etc. ...) for the predicates in the program, and • machine-readable comments (in the "literate programming" style). The assertions and comments included in the source file need to be written using the Ciao system assertion language. A simple compatibility library is available to make traditional (constraint) logic programming systems ignore these assertions and comments allowing normal treatment of programs documented in this way. The documentation is currently generated in HTML or texinf o format. From the texinf o output, printed and on-line manuals in several formats (dvi, ps, info, etc.) can be easily generated automatically, using publicly available tools, lpdoc can also generate 'man' pages (Unix man page format) as well as brief descriptions in html or emacs info formats suitable for inclusion in an on-line index of applications. In particular, lpdoc can create and maintain fully automatically WWW and info sites containing on-line versions of the documents it produces. The lpdoc manual (and the Ciao system manuals) are generated by lpdoc. Lpdoc is distributed under the GNU general public license. Note: lpdoc is fully supported on Linux, Mac OS X, and other Un*x-like systems. Due to the use of several Un*x-related utilities, some documentation back-ends may require Cygwin under Win32. This documentation corresponds to version 3.0 (2011/7/7, 16:33:15 CEST).