Implementation of a building automation system based on semantic modeling

This paper presents an Ontology-Based multi-technology platform designed to avoid some issues of Building Automation Systems. The platform allows the integration of several building automation protocols, eases the development and implementation of different kinds of services and allows sharing information related to the infrastructure and facilities within a building. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

ICT Road map for supporting energy systems in smart cities

This paper introduces a road map for ICTs (Information and communication technologies) supporting planning, operation and management of energy systems in smart cities. The road map summarises different elements that form energy systems in cities and proposes research and technical development (RTD) and innovation activities for the development and innovation of ICTs for holistic design, planning and operation of energy systems. In addition, synergies with other ICT systems for smart cities are considered. There are four main target groups for the road map: 1) citizen; 2) building sector; 3) energy sector; and 4) municipality level. As an example for enabling active participation of citizens, the road map proposes how ICT can enable citizens? involvement among others into building design. The building sector roadmap proposes how ICTs can support the planning of buildings and renovations in the future, as well as how to manage building energy systems. The energy sector road map focuses on city?s energy systems and their planning and management, including e.g. demand side management, management of different district level energy systems, energy performance validation and management, energy data models, and smarter use of open energy data. Moreover, the municipality level road map proposes among others ICTs for better integration of city systems and city planning enabling maximised energy efficiency. In addition, one road map section suggests development needs related to open energy data, including among others the use of energy data and the development and harmonisation of energy data models. The road map has been assembled in the READY4SmartCities project (funded by EU 7th Framework Programme), which focuses on the energy system at the city level, consisting of centralised energy systems and connections to the national level energy grids, as well as interconnections to the neighbourhood and building level energy systems.

Modelo de dirección de proyectos complejos: aplicación a la gestión integrada de la Comunidad de Regantes LASESA (Huesca)

La complejidad en los proyectos y la complejidad de la dirección de proyectos son conceptos cuyo interés va en aumento. En el ámbito de los proyectos, dado que la gestión de recursos y las actividades suceden en interacción con las personas, la complejidad en dirección de proyectos resulta ser una práctica inherentemente social. Esto ha hecho que en la actualidad se haya convertido en una necesidad profundizar en el concepto. En el primer capítulo de esta investigación, se hace una revisión del estado del arte del concepto y se construye un marco teórico que permite establecer y justificar las dimensiones de la complejidad en esta disciplina. De igual manera, con una revisión similar de los estándares internacionales existentes, se descubren las herramientas y modelos para el análisis de la complejidad en dirección de proyectos, con la que se pretende, a través de la práctica profesional desde organismos y alianzas internacionales, ayudar a contrastar la utilidad e interés de los conceptos propuestos. En el segundo capítulo, se presenta un marco conceptual sobre la certificación de competencias, se analizan y comparan los principales sistemas de certificación de competencias vigentes en el ámbito de la dirección de proyectos. En el tercer capítulo, se presenta un proceso metodológico novedoso para valorar, desde la integración del conocimiento experto y experimentado, dos aspectos complementarios de la complejidad de la dirección de proyectos: (a) la valoración del nivel de complejidad del proyecto; y (b), la valoración de los efectos en el desarrollo de las competencias de comportamiento de las partes implicadas. La metodología propuesta se aplica a la Comunidad de Regantes LASESA en Huesca (España), proceso que se presenta en el cuarto capítulo. LASESA es un proyecto complejo que gestiona los recursos hídricos de 10.000 hectáreas y con más de 600 propietarios implicados. Los resultados evidencian como la gestión de un proyecto complejo genera efectos positivos en el desarrollo de las competencias de comportamiento de las personas que se implican y participan en los trabajos….. ABSTRACT The complexity of the projects and the complexity of project management are concepts whose interest is increasing. In terms of projects, since the management of resources and activities occur in interaction with people, the project management complexity makes an inherently social practice. This has now has become a necessity to deepen the concept. In the first chapter of this study, we review the state of art of the concept and builds a theoretical framework that allows to establish and justify the dimensions of the complexity in this discipline. Likewise, a similar review of existing international standards, we discover the tools and models for the analysis of complexity in project management, with which it is intended, through professional practice from agencies and international alliances, help to compare the usefulness and interest of the proposed concepts. In the second chapter, we present a conceptual framework for the certification of competences, are analyzed and compared the main skills certification systems in force in the field of project management. In the third chapter, we present a novel methodological process to assess, since the integration of expert knowledge and experienced, complementary aspects of the complexity of project management: (a) the assessment of the level of complexity of the project, and (b ), the assessment of the effects on the development of behavioral competencies of the parties involved. The proposed methodology is applied to the Community Irrigation LASESA in Huesca (Spain), a process that is presented in the fourth chapter. LASESA is a complex project that manages the water resources of 10,000 acres and more than 600 landowners involved. The results show as managing a complex project generates positive effects on the development of behavioral competencies of people who are involved and participate in the work.

Modeling sub-threshold slope and DIBL mismatch of sub-22nm FinFet

A great challenge for future information technologies is building reliable systems on top of unreliable components. Parameters of modern and future technology devices are affected by severe levels of process variability and devices will degrade and even fail during the normal lifeDme of the chip due to aging mechanisms. These extreme levels of variability are caused by the high device miniaturizaDon and the random placement of individual atoms. Variability is considered a "red brick" by the InternaDonal Technology Roadmap for Semiconductors. The session is devoted to this topic presenDng research experiences from the Spanish Network on Variability called VARIABLES. In this session a talk entlited "Modeling sub-threshold slope and DIBL mismatch of sub-22nm FinFet" was presented.

REST service testing based on inferred XML schemas

The concept of service oriented architecture has been extensively explored in software engineering, due to the fact that it produces architectures made up of several interconnected modules, easy to reuse when building new systems. This approach to design would be impossible without interconnection mechanisms such as REST (Representationa State Transfer) services, which allow module communication while minimizing coupling. . However, this low coupling brings disadvantages, such as the lack of transparency, which makes it difficult to sistematically create tests without knowledge of the inner working of a system. In this article, we present an automatic error detection system for REST services, based on a statistical analysis over responses produced at multiple service invocations. Thus, a service can be systematically tested without knowing its full specification. The method can find errors in REST services which could not be identified by means of traditional testing methods, and provides limited testing coverage for services whose response format is unknown. It can be also useful as a complement to other testing mechanisms.

Una contribución a la programación cognitiva: arquitecturas de segunda generación para representación del conocimiento

La tesis propone el concepto y diseño de una arquitectura cognitiva para representación de conocimiento profesional especializado en clases de dominios relacionados con el mundo físico. Constituye una extensión de los trabajos de B.Chandrasekaran, potenciando el concepto de arquitectura basada en tareas genéricas propuesta por dicho autor. En base a la arquitectura propuesta, se ha desarrollado un entorno como herramienta de construcción de sistemas expertos de segunda generación, así como un lenguaje para programación cognitiva (DECON)- Dicho entorno, programado en lenguaje C sobre UNIX, ha sido utilizado para el desarrollo de un sistema para predicción de avenidas en la Cuenca Hidrográfica del Jucar, en el marco del proyecto SAIH. Primeramente, la tesis plantea el problema de la modelización del comportamiento de los sistemas físicos, reflejando las limitaciones de las formas clásicas de representación del conocimiento para abordar dicho problema, así como los principales enfoques más recientes basados en el concepto de arquitectura cognitiva y en las técnicas de simulación cualitativa. Se realiza después una síntesis de la arquitectura propuesta, a nivel del conocimiento, para detallar posteriormente su desarrollo a nivel simbólico y de implementación, así como el método general para la construcción de modelos sobre la arquitectura. Se muestra también un resumen de los principales aspectos del desarrollo de software. Finalmente, en forma de anejos, se presenta un caso de estudio, el sistema SIRAH (Sistema Inteligente de Razonamiento Hidrológico), junto con la gramática formal del lenguaje de soporte para la definición de modelos.---ABSTRACT---The thesis proposes the concept and design of a cognitive architecture for professional knowledge representation, specialized in domain classes related to the physical world. It is an extensión of the Chandrasekaran's work, improving the concept of Generic Task based architecture introduced by this author. Based on the proposed architecture, an environment has been developed, as a case of second generation building expert systems tool, as well as a language for cognitive programming (DECON). The environment, programmed in C lenguage on UNIX operating system, has been used to develop a system for flood prediction in the Jucar watershed, inside of the SAIH project. Firstly, the behavior modeling problem of physical systems is discussed, showing the limitations of the classical representations to tackle it, beside the most recent approaches based on cognitive architecture concepts and qualitative simulation technique. An overview of the architecture at the knowledge level is then made, being followed by its symbolic and implementation level description, as well as a general guideline for building models on top of the architecture. The main aspects of software development are also introduced. Finaly, as annexes, a case of study -the SIRAH system (Sistema Inteligente de RAzonamiento Hidrológico)- is introduced, along with the formal grammar of the support language for model definition.

Definición de los procedimientos e indicadores de la cadena de custodia de la industria de pasta y papel vinculados a la normativa ISO 9000/14000

En el trabajo se ha reflejado la génesis del término „desarrollo sostenible‟ y la preocupación social y de los gobiernos hacia la sostenibilidad de los recursos, generando una política forestal a escala internacional, cuyo hito inicial desempeña la Cumbre de Rio y otros procesos, donde surge el término „sostenibilidad‟ - procesos gubernamentales que ponen su atención en los bosques,entre ellos el Proceso paneuropeo del que emanan los Criterios e indicadores de la gestión forestal sostenible, así como otros foros donde aparece la vinculación entre los productos y la sostenibilidad de los bosques de donde proceden. A partir de esos conceptos aparecen los sistemas de certificación, primero FSC, promovido por las ONG ambientalistas, y en respuesta a ello, el sistema PEFC de los propietarios forestales privados con las industrias forestales. En su introducción, el trabajo recoge como surge y evoluciona esta preocupación y como se sucede y desarrollan los sistemas de certificación en España, orientados tanto a la superficie forestal como a sus productos derivados. Tratando de ser una herramienta técnica, en estos últimos quince años, se han ido planteando metodologías y propuestas técnicas que puedan garantizar el origen sostenible del bosque de donde procede la materia prima. Aunque la persistencia de la masa forestal como término tiene importancia, no considera numerosos aspectos incluidos en el concepto “gestión forestal sostenible”. El trabajo manifiesta qué es y cómo se origina la Gestión Forestal Sostenible y muy ligado con ello, el origen de la certificación como herramienta, explicando cómo se incardina la certificación forestal española con las estructuras internacionales y se construyen nuevas estructuras a escala española y autonómica. Se expone el dominio y alcance técnico de la certificación, sus inicios y un análisis de la diversidad de sistemas y etiquetas existentes -como ha ido evolucionando a escala internacional y nacional, por sistemas, sectores y continentes, con especial atención en España, recopilando lo sucedido relevante para el sector forestal, industrias forestales y sistemas de certificación en los años de estudio de elaboración de la tesis. Se refleja la relevancia que adquiere la certificación forestal y de la cadena de custodia para la industria del papel, tanto por las regulaciones, normativas y legislación que involucran al producto derivado del bosque como por ser herramienta que enlaza el bosque sostenible con el consumidor. La aplicación de todas esas especificaciones técnicas que muestran la sostenibilidad del bosque y al trazabilidad en el proceso productivo comporta una carga administrativa de recopilación de información, de control para el seguimiento asociado con los registros necesarios, y de archivo de documentos, conforme a las exigencias que plantean los sistemas de certificación forestal. Por tanto, es importante definir un método y procedimientos genéricos para los correspondientes sistemas de gestión preexistentes en las empresas del sector de pasta y papel (de calidad/ de medio ambiente/integrados), para implantar un Sistema de Cadena de Custodia genérico (común a FSC y PEFC) en una instalación de celulosa y papel y un sistema de diligencia debida. Para ello, ha sido necesario analizar la línea de producción y establecer los puntos de su diagrama en los que se requiere el control de la trazabilidad, puntos en los que se procede al seguimiento y registro de la materia prima, materia semielaborada y producto, y de ahí proceder a redactar o retocar los procedimientos de gestión calidad/ medioambiental, en su caso, para incluir los campos de registro. Según determinen los procedimientos, se efectuará un seguimiento y registro de los, derivados que configuran una característica y se determinará una serie de indicadores del sistema de trazabilidad de la madera en la industria de celulosa y papel, es decir, un conjunto de parámetros cuantitativos y descriptivos, sujetos al seguimiento de forma periódica, que muestren el cambio y permitan observar la evaluación y control del Sistema de Cadena de Custodia. Además de asegurar la trazabilidad de la madera y fibra en la industria de pasta y papel y con ello la sostenibilidad del bosque del que procede, se avalará la legalidad de los aprovechamientos que proporcionan ese recurso maderable, cumpliendo así no sólo la legislación vigente sino también ambos sistemas de certificación FSC y PEFC. El sistema de cadena de custodia de la pasta y papel se caracteriza por los indicadores de seguimiento que permite el control de la trazabilidad. ABSTRACT This paper traces the origins of the term „Sustainable Development‟ and of both citizen and institutional concern for the sustainability of resources, leading to the enactment of a forestry policy at international level, of which the initial milestones are the Rio Summit and other processes in which the term „Sustainability‟ was born. Those forestfocused institutional initiatives include the pan-European process that led to the publication of Sustainable Forest Management Criteria and Indicators, and other forums that highlight the link between finished wood-based products and the sustainability of the forests from which that wood is sourced. Those concepts were the culture in which forest certification systems were engendered, first FSC, promoted by environmental NGOs, and subsequently PEFC, fostered in response to FSC by private forest owners and forest-based industries. In its Introduction, this paper looks at how such concern arose and has evolved and how certification systems came into existence in Spain and developed to encompass both forest lands and forest-based products. As part of a mission to provide an applicable technical tool, new methodologies and technical proposals have been put forward over the past fifteen years aimed at guaranteeing the sustainable origin of the forest from which raw material is sourced. Although the maintenance of forest stands as a term in its own right is important, it does not take many of the aspects included in the concept of “sustainable forest management” into account. This thesis describes what SFM is and how it was born, underlying the close link between SFM and the origin of certification as a tool, explaining how Spanish forest certification is embodied in international structures, while new structures are built here in Spain on both the national and regional scale. This work also details the domain and scope of forest certification from the technical standpoint, explains its beginnings, and assesses the various systems and labels that exist - how certification has evolved internationally and nationally across systems, sectors and continents, with special emphasis on Spain. It provides a compilation of events relevant to forestry, forest industries and forest certification systems that have taken place during the years this thesis has been in preparation. It reflects on the relevance that forest and chain of custody certification holds for the paper industry, in view not only of the regulations, policies and legislation that affect forest-based products but also of its role as a tool that bonds the sustainable forest with the consumer. Implementing the range of technical specifications to demonstrate forest sustainability and traceability throughout the production process entails the administrative burden of collecting information and providing controls to process the relevant records and documents to be kept on file in compliance with the requirements made by forest certification schemes. It is therefore important to define a generic method, together with its relevant procedures,that fits the management systems (quality / environmental / integrated)existing today in pulp and paper companies, in order to implement a generic Chain of Custody scheme (common to FSC and PEFC) in a pulp and paper mill, and a due diligence system. To achieve that, it has first been necessary to analyse the production line and establish points along the route where traceabilitycontrols need to be implemented and points where raw material, semi-finished goods and end products should be monitored and recorded. Subsequently, the procedures in quality / environmental management systems need to be drafted or amended as required to include fields that reflect those records. As required by the procedures, forest-based products that have a specific characteristic shall be monitored and recorded, and a number of indicators identified in the traceability system of wood for pulp & paper, i.e.createa set of quantitative and descriptive parameters subject to regular monitoringthat reveal changes and enable the Chain of Custody system to be assessed and controlled. In addition to ensuring the traceability of wood and fibre in the pulp and paper industry -and so the sustainability of the forest from which it is sourced -, the legality of the harvesting that produces that timber will also be enhanced, thus fulfilling not only the law but also both FSC and PEFC certification schemes. The chain of custody system for pulp and paper is characterised by monitoring indicators that enable traceability to be controlled.

Validación de sistemas constructivos de los cerramientos de la edificación mediante la aplicación de los métodos de decisión multicriterio : aplicación al catálogo de elementos constructivos del Código Técnico de la Edificación

Como punto de partida para el desarrollo de la Tesis, se mantiene la hipótesis de que es posible establecer métodos de evaluación global sobre el grado de utilidad de los sistemas constructivos correspondientes a los cerramientos de la edificación. Tales métodos habrían de posibilitar, de entre una serie finita de sistemas alternativos, cuáles de ellos son los objetivamente más adecuados para su selección en un entorno de decisión concreto, y habrían de permitir fundamentar la justificación objetiva de tal decisión. Paralelamente a esta hipótesis de carácter general, se planteó desde el inicio la necesidad de comprobación de una hipótesis de partida particular según la cual los sistemas constructivos basados en la utilización de componentes prefabricados, o procesos de puesta en obra con un alto grado de industrialización arrojarían valores de utilidad mayores que los sistemas tradicionales basados en la albañilería. Para la verificación de estas dos hipótesis de partida se ha procedido inicialmente a la selección de un conjunto coherente de doce sistemas de cerramientos de la edificación que pudiese servir como testigo de su diversidad potencial, para proceder a su valoración comparativa. El método de valoración propuesto ha entrado a considerar una serie de factores de diversa índole que no son reducibles a un único parámetro o magnitud que permitiese una valoración de tipo lineal sobre su idoneidad relativa, ni que permitiese establecer un grado de prelación entre los distintos sistemas constructivos alternativos de manera absoluta. Para resolver este tour de force o desafío metodológico se ha acudido a la aplicación de metodologías de valoración que nos permitiesen establecer de forma racional dicha comparativa. Nos referimos a una serie de metodologías provenientes en primera instancia de las ciencias exactas, que reciben la denominación de métodos de ayuda a la decisión multicriterio, y en concreto el denominado método ELECTRE. Inicialmente, se ha planteado la aplicación del método de análisis sobre doce sistemas constructivos seleccionados de tal forma que representasen de forma adecuada las tres categorías establecidas para caracterizar la totalidad de sistemas constructivos posibles; por peso, grado de prefabricación y grado de ventilación. Si bien la combinación de las tres categorías básicas anteriormente señaladas produce un total de 18 subcategorías conceptuales, tomamos finalmente doce subcategorías dado que consideramos que es un número operativo suficiente por extenso para el análisis propuesto y elimina tipos no relevantes. Aplicado el método propuesto, a estos doce sistemas constructivos “testigo”, se constata el mayor grado de utilidad de los sistemas prefabricados, pesados y no ventilados. Al hilo del análisis realizado en la Parte II de la Tesis sobre los doce sistemas constructivos “testigo”, se ha realizado un volcado de los sistemas constructivos incluidos en el Catalogo de Elementos Constructivos del CTE (versión 2010) sobre las dieciocho subcategorías definidas en dicha Parte II para caracterizar los sistemas constructivos “testigo”. Posteriormente, se ha procedido a una parametrización de la totalidad de sistemas constructivos para cerramientos de fachadas incluidos en este Catálogo. La parametrización sistemática realizada ha permitido establecer, mediante el cálculo del valor medio que adoptan los parámetros de los sistemas pertenecientes a una misma familia de las establecidas por el Catálogo, una caracterización comparativa del grado de utilidad de dichas familias, tanto en lo relativo a cada uno de los parámetros como en una valoración global de sus valores, de carácter indicativo. Una vez realizada una parametrización completa de la totalidad de sistemas constructivos incluidos en el Catálogo, se ha realizado una simulación de aplicación de la metodología de validación desarrollada en la Parte II de la presente Tesis, con el objeto de comprobar su adecuación al caso. En conclusión, el desarrollo de una herramienta de apoyo a la decisión multicriterio aplicada al Catálogo de Elementos constructivos del CTE se ha demostrado técnicamente viable y arroja resultados significativos. Se han diseñado dos sistemas constructivos mediante la aplicación de la herramienta desarrollada, uno de fachada no ventilada y otro de fachada ventilada. Comparados estos dos sistemas constructivos mejorados con otros sistemas constructivos analizados Se comprueba el alto grado de utilidad objetiva de los dos sistemas diseñados en relación con el resto. La realización de este ejercicio de diseño de un sistema constructivo específico, que responde a los requerimientos de un decisor concreto viene a demostrar, así pues, la utilidad del algoritmo propuesto en su aplicación a los procesos de diseño de los sistemas constructivos. La tesis incorpora dos innovaciones metodológicas y tres innovaciones instrumentales. ABSTRACT The starting point for the thesis is the hypothesis that it is possible to devise suitability degree evaluation methods of building enclosure systems. Such methods should allow optimizing appraisal, given a specific domain of decision, among a finite number of alternative systems, and provide objective justification of such decision. Along with the above mentioned general assumption, a second hypothesis whereby constructive systems based on the use of prefabricated components, or high industrialization degree work processes, would throw efficiency values higher than traditional masonry systems needed to be tested. In order to validate these two hypothesis a coherent set of twelve enclosure systems that could serve as a reference sample of their potential diversity was selected and a comparative evaluation was carried out. The valuation method proposed has considered several different factors that are neither reducible to a single parameter or magnitude that would allow a linear evaluation of their relative suitability nor allow to establishing an absolute priority ranking between different alternative constructive systems. In order to resolve this tour de force or methodological challenge, valuation methodologies that enable use establishing rational assessments were used. We are referring to a number of methodologies taken from the exact sciences field, usually known as aid methods for multi-criteria decision, in particular the so-called ELECTRE method. Even though the combination of the mentioned three basic categories result in eighteen conceptual sub categories, we are finally considering just twelve since we deem it adequately extended for the our intended purpose and eliminates non relevant instances. The method of analysis was initially applied to the set of twelve selected constructive systems is a way that they could represent adequately the three previously established categories set out to characterize all possible enclosure systems, namely weight, prefabrication degree and ventilation degree. Once the proposed method is applied to the sample systems, the higher efficiency of the prefabricated, heavy and not ventilated systems was confirmed. In line with the analysis in Part II of the thesis on the twelve chosen enclosure systems, it has done an uploading data of construction systems listed in the Catalogue of constructive elements of the CTE (version 2010) according the eighteen subcategories used in this part II to characterize the construction systems taken as sample. Subsequently, a parameterization of all enclosure facade systems included in this catalog has been undertaken. The systematic parameterization has allowed to set, by means of calculating the average values of the parameters of the systems belonging to the same family of those established by the Catalog, a comparative characterization of the efficiency degree of these families, both in relation to each parameter as to an overall evaluation of its values, in a indicative way. After the parameterization of all enclosure systems included in the Catalog, a simulation of validation methodology application developed in Part II of this Thesis has been made, in order to assess its consistency to the referred case. In conclusion, the development of a multi-criteria decision aid tool, applied to the CTE Catalog of constructive elements, has proved to be technically feasible and yields significant results. Two building systems through the application of the developed tool, a non-ventilated façade and a ventilated façade have been designed. Comparing these two improved construction systems with other building systems analyzed, we were able to assess the high degree of objective efficiency of the two systems designed in relation to the rest. The exercise of designing a specific enclosure system that meets the requirements of a particular decision-maker hence shows the suitability of the proposed algorithm applied to the process of enclosure systems design. This Thesis includes two methodological innovations and three instrumental innovations.

Experiments in abstract interpretation-based code certification for pervasive systems

Proof carrying code (PCC) is a general is originally a roof in ñrst-order logic of certain vermethodology for certifying that the execution of an un- ification onditions and the checking process involves trusted mobile code is safe. The baste idea is that the ensuring that the certifícate is indeed a valid ñrst-order code supplier attaches a certifícate to the mobile code proof. which the consumer checks in order to ensure that the The main practical difñculty of PCC techniques is in code is indeed safe. The potential benefit is that the generating safety certiñeates which at the same time: i) consumer's task is reduced from the level of proving to allow expressing interesting safety properties, ii) can be the level of checking. Recently, the abstract interpre- generated automatically and, iii) are easy and efficient tation techniques developed, in logic programming have to check. In [1], the abstract interpretation techniques been proposed as a basis for PCC. This extended ab- [5] developed in logic programming1 are proposed as stract reports on experiments which illustrate several is- a basis for PCC. They offer a number of advantages sues involved in abstract interpretation-based certifica- for dealing with the aforementioned issues. In particution. First, we describe the implementation of our sys- lar, the xpressiveness of existing abstract domains will tem in the context of CiaoPP: the preprocessor of the be implicitly available in abstract interpretation-based Ciao multi-paradigm programming system. Then, by code certification to deñne a wide range of safety propermeans of some experiments, we show how code certifi- ties. Furthermore, the approach inherits the automation catión is aided in the implementation of the framework. and inference power of the abstract interpretation en- Finally, we discuss the application of our method within gines used in (Constraint) Logic Programming, (C)LP. the área, of pervasive systems

Abstract interpretation-based code certification for pervasive systems: Preliminary experiments

Proof carrying code is a general methodology for certifying that the execution of an untrusted mobile code is safe, according to a predefined safety policy. The basic idea is that the code supplier attaches a certifícate (or proof) to the mobile code which, then, the consumer checks in order to ensure that the code is indeed safe. The potential benefit is that the consumer's task is reduced from the level of proving to the level of checking, a much simpler task. Recently, the abstract interpretation techniques developed in logic programming have been proposed as a basis for proof carrying code [1]. To this end, the certifícate is generated from an abstract interpretation-based proof of safety. Intuitively, the verification condition is extracted from a set of assertions guaranteeing safety and the answer table generated during the analysis. Given this information, it is relatively simple and fast to verify that the code does meet this proof and so its execution is safe. This extended abstract reports on experiments which illustrate several issues involved in abstract interpretation-based code certification. First, we describe the implementation of our system in the context of CiaoPP: the preprocessor of the Ciao multi-paradigm (constraint) logic programming system. Then, by means of some experiments, we show how code certification is aided in the implementation of the framework. Finally, we discuss the application of our method within the área of pervasive systems which may lack the necessary computing resources to verify safety on their own. We herein illustrate the relevance of the information inferred by existing cost analysis to control resource usage in this context. Moreover, since the (rather complex) analysis phase is replaced by a simpler, efficient checking process at the code consumer side, we believe that our abstract interpretation-based approach to proof-carrying code becomes practically applicable to this kind of systems.

Using Buildroot for building Embedded Linux Systems

This document describes the basic steps to developed and embedded Linux-based system using the BeagleBoard. The document has been specifically written to use a BeagleBoard development system based on the OMAP `processor.

Evaluation of three solar and daylighting control systems based on Calumen II, Ecotect and Radiance simulation programs to obtain an energy efficient and healthy interior in the experimental building prototype SDE10

Evaluation of three solar and daylighting control systems based on Calumen II, Ecotect and Radiance simulation programs to obtain an energy efficient and healthy interior in the experimental building prototype SDE10

Using Buildroot for building Embedded Linux Systems with the Raspberry-PI

This document describes the basic steps to developed and embedded Linux-based system using the Raspberry PI board. The document has been specifically written to use a RaspBerry-PI development system based on the BCM2835 processor. All the software elements used have a GPL license.

Inter-organizational information systems adoption for service innovation in building sector

The building sector has experienced a significant decline in recent years in Spain and Europe as a result of the financial crisis that began in 2007. This drop accompanies a low penetration of information and communication technologies in inter-organizational oriented business processes. The market decrease is causing a slowdown in the building sector, where only flexible small and medium enterprises (SMEs) survive thanks to specialization and innovation in services, which allow them to face new market demands. Inter-organizational information systems (IOISs) support innovation in services, and are thus a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston's (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model identifies the factors influencing IOIS adoption in SMEs in the building sector, to promote further service innovation for competitive and collaborative advantages. An empirical longitudinal study over six consecutive years using data from Spanish SMEs in the building sector validates the model, using the partial least squares technique and analyzing temporal stability. The main findings of this research are the four ways an IOIS might contribute to service innovation in the building sector. Namely: a) improving client interfaces and the link between service providers and end users; b) defining a specific market where SMEs can develop new service concepts; c) enhancing the service delivery system in traditional customer?supplier relationships; and d) introducing information and communication technologies and tools to improve information management.

Communication Middleware for Distributed Hard Real-Time Systems in Java

Distributed real-time embedded systems are becoming increasingly important to society. More demands will be made on them and greater reliance will be placed on the delivery of their services. A relevant subset of them is high-integrity or hard real-time systems, where failure can cause loss of life, environmental harm, or significant financial loss. Additionally, the evolution of communication networks and paradigms as well as the necessity of demanding processing power and fault tolerance, motivated the interconnection between electronic devices; many of the communications have the possibility of transferring data at a high speed. The concept of distributed systems emerged as systems where different parts are executed on several nodes that interact with each other via a communication network. Java’s popularity, facilities and platform independence have made it an interesting language for the real-time and embedded community. This was the motivation for the development of RTSJ (Real-Time Specification for Java), which is a language extension intended to allow the development of real-time systems. The use of Java in the development of high-integrity systems requires strict development and testing techniques. However, RTJS includes a number of language features that are forbidden in such systems. In the context of the HIJA project, the HRTJ (Hard Real-Time Java) profile was developed to define a robust subset of the language that is amenable to static analysis for high-integrity system certification. Currently, a specification under the Java community process (JSR- 302) is being developed. Its purpose is to define those capabilities needed to create safety critical applications with Java technology called Safety Critical Java (SCJ). However, neither RTSJ nor its profiles provide facilities to develop distributed realtime applications. This is an important issue, as most of the current and future systems will be distributed. The Distributed RTSJ (DRTSJ) Expert Group was created under the Java community process (JSR-50) in order to define appropriate abstractions to overcome this problem. Currently there is no formal specification. The aim of this thesis is to develop a communication middleware that is suitable for the development of distributed hard real-time systems in Java, based on the integration between the RMI (Remote Method Invocation) model and the HRTJ profile. It has been designed and implemented keeping in mind the main requirements such as the predictability and reliability in the timing behavior and the resource usage. iThe design starts with the definition of a computational model which identifies among other things: the communication model, most appropriate underlying network protocols, the analysis model, and a subset of Java for hard real-time systems. In the design, the remote references are the basic means for building distributed applications which are associated with all non-functional parameters and resources needed to implement synchronous or asynchronous remote invocations with real-time attributes. The proposed middleware separates the resource allocation from the execution itself by defining two phases and a specific threading mechanism that guarantees a suitable timing behavior. It also includes mechanisms to monitor the functional and the timing behavior. It provides independence from network protocol defining a network interface and modules. The JRMP protocol was modified to include two phases, non-functional parameters, and message size optimizations. Although serialization is one of the fundamental operations to ensure proper data transmission, current implementations are not suitable for hard real-time systems and there are no alternatives. This thesis proposes a predictable serialization that introduces a new compiler to generate optimized code according to the computational model. The proposed solution has the advantage of allowing us to schedule the communications and to adjust the memory usage at compilation time. In order to validate the design and the implementation a demanding validation process was carried out with emphasis in the functional behavior, the memory usage, the processor usage (the end-to-end response time and the response time in each functional block) and the network usage (real consumption according to the calculated consumption). The results obtained in an industrial application developed by Thales Avionics (a Flight Management System) and in exhaustive tests show that the design and the prototype are reliable for industrial applications with strict timing requirements. Los sistemas empotrados y distribuidos de tiempo real son cada vez más importantes para la sociedad. Su demanda aumenta y cada vez más dependemos de los servicios que proporcionan. Los sistemas de alta integridad constituyen un subconjunto de gran importancia. Se caracterizan por que un fallo en su funcionamiento puede causar pérdida de vidas humanas, daños en el medio ambiente o cuantiosas pérdidas económicas. La necesidad de satisfacer requisitos temporales estrictos, hace más complejo su desarrollo. Mientras que los sistemas empotrados se sigan expandiendo en nuestra sociedad, es necesario garantizar un coste de desarrollo ajustado mediante el uso técnicas adecuadas en su diseño, mantenimiento y certificación. En concreto, se requiere una tecnología flexible e independiente del hardware. La evolución de las redes y paradigmas de comunicación, así como la necesidad de mayor potencia de cómputo y de tolerancia a fallos, ha motivado la interconexión de dispositivos electrónicos. Los mecanismos de comunicación permiten la transferencia de datos con alta velocidad de transmisión. En este contexto, el concepto de sistema distribuido ha emergido como sistemas donde sus componentes se ejecutan en varios nodos en paralelo y que interactúan entre ellos mediante redes de comunicaciones. Un concepto interesante son los sistemas de tiempo real neutrales respecto a la plataforma de ejecución. Se caracterizan por la falta de conocimiento de esta plataforma durante su diseño. Esta propiedad es relevante, por que conviene que se ejecuten en la mayor variedad de arquitecturas, tienen una vida media mayor de diez anos y el lugar ˜ donde se ejecutan puede variar. El lenguaje de programación Java es una buena base para el desarrollo de este tipo de sistemas. Por este motivo se ha creado RTSJ (Real-Time Specification for Java), que es una extensión del lenguaje para permitir el desarrollo de sistemas de tiempo real. Sin embargo, RTSJ no proporciona facilidades para el desarrollo de aplicaciones distribuidas de tiempo real. Es una limitación importante dado que la mayoría de los actuales y futuros sistemas serán distribuidos. El grupo DRTSJ (DistributedRTSJ) fue creado bajo el proceso de la comunidad de Java (JSR-50) con el fin de definir las abstracciones que aborden dicha limitación, pero en la actualidad aun no existe una especificacion formal. El objetivo de esta tesis es desarrollar un middleware de comunicaciones para el desarrollo de sistemas distribuidos de tiempo real en Java, basado en la integración entre el modelo de RMI (Remote Method Invocation) y el perfil HRTJ. Ha sido diseñado e implementado teniendo en cuenta los requisitos principales, como la predecibilidad y la confiabilidad del comportamiento temporal y el uso de recursos. El diseño parte de la definición de un modelo computacional el cual identifica entre otras cosas: el modelo de comunicaciones, los protocolos de red subyacentes más adecuados, el modelo de análisis, y un subconjunto de Java para sistemas de tiempo real crítico. En el diseño, las referencias remotas son el medio básico para construcción de aplicaciones distribuidas las cuales son asociadas a todos los parámetros no funcionales y los recursos necesarios para la ejecución de invocaciones remotas síncronas o asíncronas con atributos de tiempo real. El middleware propuesto separa la asignación de recursos de la propia ejecución definiendo dos fases y un mecanismo de hebras especifico que garantiza un comportamiento temporal adecuado. Además se ha incluido mecanismos para supervisar el comportamiento funcional y temporal. Se ha buscado independencia del protocolo de red definiendo una interfaz de red y módulos específicos. También se ha modificado el protocolo JRMP para incluir diferentes fases, parámetros no funcionales y optimizaciones de los tamaños de los mensajes. Aunque la serialización es una de las operaciones fundamentales para asegurar la adecuada transmisión de datos, las actuales implementaciones no son adecuadas para sistemas críticos y no hay alternativas. Este trabajo propone una serialización predecible que ha implicado el desarrollo de un nuevo compilador para la generación de código optimizado acorde al modelo computacional. La solución propuesta tiene la ventaja que en tiempo de compilación nos permite planificar las comunicaciones y ajustar el uso de memoria. Con el objetivo de validar el diseño e implementación se ha llevado a cabo un exigente proceso de validación con énfasis en: el comportamiento funcional, el uso de memoria, el uso del procesador (tiempo de respuesta de extremo a extremo y en cada uno de los bloques funcionales) y el uso de la red (consumo real conforme al estimado). Los buenos resultados obtenidos en una aplicación industrial desarrollada por Thales Avionics (un sistema de gestión de vuelo) y en las pruebas exhaustivas han demostrado que el diseño y el prototipo son fiables para aplicaciones industriales con estrictos requisitos temporales.