Underground dwellings in the Tajuña valley, Madrid, Spain and their bioclimatic adaptation

Underground dwellings are the maximum example of the vernacular architecture adaptation to the climatic conditions in areas with high annual and daily thermal fluctuations. This paper summarizes the systematic research about the energy performance of this popular architecture and their adaptation to the outdoor conditions in the case of the low area of the River Tajuña and its surroundings. Some considerations on their maintenance and renovation arise from the research.

Seismic modelling and ava analysis of hidrocarbon traps

In this study, forward seismic modelling of four geological models with Hydrocarbon (HC) traps were performed by ray tracing method to produce synthetic seismogram of each model. The idea is to identify the Hydrocarbon Indicators (HCI‟s) such as bright spot, flat spot, dim spot and Bottom Simulating Reflector (BSR) in the synthethic seismogram. The modelling was performed in DISCO/FOCUS 5.0 seismic data processing programme. Strong positive and negative reflection amplitudes and some artifact reflection horizons were observed on produced seismograms due to rapid changes in subsurface velocity and geometry respectively Additionally, Amplitude-versus-angle (AVA) curves of each HCIs was calculated by the Crewes Zoeppritz Explorer programme. AVA curves show that how the reflection coefficients change with the density and the P and S wave velocities of each layer such as oil, gas, gas hydrate or water saturated sediments. Due to AVA curves, an increase in reflection amplitude with incident angle of seismic waves corresponds to an indicator of a hydrocarbon reservoir

A new way of teaching different subjects in a foreign language in the Building Engineering Degree at the Universidad Politécnica.

The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.

Aerodynamic Analysis of Open Trailing Edge Airfoils at Low Reynolds Number

A study has been made on the influence of the open trailing edge in airfoils used in different devices relating their aerodynamic performances. Wind tunnel tests have been made at different Reynolds numbers and angles of attack in order to show this effect. Besides, a quantitative study of the aerodynamic properties has been made based on the different trailing edge thickness

SMA-Based Muscle-Like Actuation in Biologically Inspired Robots: A State of the Art Review

New actuation technology in functional or "smart" materials has opened new horizons in robotics actuation systems. Materials such as piezo-electric fiber composites, electro-active polymers and shape memory alloys (SMA) are being investigated as promising alternatives to standard servomotor technology [52]. This paper focuses on the use of SMAs for building muscle-like actuators. SMAs are extremely cheap, easily available commercially and have the advantage of working at low voltages. The use of SMA provides a very interesting alternative to the mechanisms used by conventional actuators. SMAs allow to drastically reduce the size, weight and complexity of robotic systems. In fact, their large force-weight ratio, large life cycles, negligible volume, sensing capability and noise-free operation make possible the use of this technology for building a new class of actuation devices. Nonetheless, high power consumption and low bandwidth limit this technology for certain kind of applications. This presents a challenge that must be addressed from both materials and control perspectives in order to overcome these drawbacks. Here, the latter is tackled. It has been demonstrated that suitable control strategies and proper mechanical arrangements can dramatically improve on SMA performance, mostly in terms of actuation speed and limit cycles.

Fundamentos antropológicos de las tecnologías biomédicas no terapéuticas

The important developments in technology in all areas of human life have generated high expectations and hopes with regard to the health sector. Science and technology have favored the development of incredible therapeutic treatments to help resolve numerous problems relating to illness and disability. Nonetheless, many developments in the therapeutic realm have given rise to discussions over the possibility of whether this same scientific and technological progress could be beneficial even for those who may not be sick. One may ask: why not apply the same knowledge and technology used for treatment of illness for conditions where therapy is not necessary, but there is a desire to care for, improve and enhance human person? These new horizons offered by biomedical technologies undoubtedly express a deep desire of every person for health, happiness, and a long life. In order to offer a response to these questions, current biomedical technologies and those in development offer a wide range of possibilities. Therefore, in this investigation we attempt to identify and define four areas of non-therapeutic treatment: illness prevention, health promotion, improving human nature, and human enhancement. These four areas, which do not directly regard illness, give rise to a series of questions, which range from those regarding the meaning of health and illness to those concerning anthropological questions, such as situations and conditions that must be taken into account so human dignity is respected. The treatment, improvement and enhancement of the human being imply clarifying in scientific and technological terms the truth and meaning of the human person as such. This research identifies and looks at the relationship between the four anthropological cornerstones which non-therapeutic biomedical technologies should be based upon so as not to impact or violate the dignity of the human person. This research presents the anthropological boundaries which non-therapeutic biomedical technologies should take into consideration so as not to alter or violate the dignity of the human person. At the same time, the research proposes an anthropological foundation on which to build a code of ethics for non-therapeutic biomedical technologies. El gran desarrollo de las tecnologías en todos los ámbitos de la vida del hombre ha generado una gran expectativa y esperanza en lo que se refiere a la salud. Ciencia y técnica están aportando grandes beneficios en materia terapéutica, ayudando a resolver muchos problemas concernientes a la enfermedad y a la discapacidad. Pero este desarrollo que se ha producido en el ámbito terapéutico nos conduce a la formulación de preguntas sobre las posibilidades que esos avances técnico-científicos pueden aportar en beneficio del hombre, cuando no se encuentra enfermo: ¿por qué no pueden aplicarse los conocimientos y tecnologías usados en terapia a un ámbito diferente, no terapéutico, con el fin de mantener, mejorar o incluso potenciar al hombre? Ciertamente los nuevos horizontes que abren las Tecnologías Biomédicas encuentran repercusión en el deseo de bienestar, de felicidad e incluso de prolongación de la vida presente en todos los hombres. Para responder a esta pregunta las Tecnologías Biomédicas han desarrollado y están desarrollando una gama muy amplia de posibilidades. En este trabajo intentamos organizar en cuatro áreas los conceptos de los tratamientos no-terapéuticos: prevención de la enfermedad, promoción de la salud, mejoramiento de la naturaleza humana y potenciación del hombre. Estas cuatro áreas, que no se refieren directamente a la enfermedad, generan una serie de interrogantes que van desde las preguntas sobre el significado de salud y enfermedad, hasta las cuestiones antropológicas relativas a la posibilidad y las condiciones que se han de dar para que tales acciones respeten la dignidad humana. Cuidar, mejorar y potenciar al hombre implica que los objetivos de la ciencia y de la técnica mantengan siempre claros los valores y la realidad del hombre en cuanto tal. ... Este Trabajo de Investigación presenta los límites antropológicos dentro de los cuales deben moverse las Tecnologías Biomédicas no-terapéuticas para no alterar el ser ni menoscabar la dignidad del hombre. Y ofrece los fundamentos antropológicos sobre los cuales se pueda construir un código ético y deontológico para las Tecnologías Biomédicas no-terapéuticas.

Los recursos medioambientales aplicados a la arquitectura contemporánea en vivienda aislada

Objetivos. Análisis a través del prisma de la sostenibilidad, con un triple objetivo: consumo de energía, aspecto constructivo y recursos arquitectónicos, de algunos ejemplos destacados de vivienda aislada desde 1973, crisis del petróleo, hasta el cambio ideológico del 11 de septiembre de 2001. Emplazadas en microclimas semejantes en distintas latitudes, para extrapolar al clima mediterráneo. Ejemplos. Siete viviendas aisladas de distinto diseño conceptual, situadas en climas subtropicales, en ecosistemas variados pero de concepción medioambiental, constructiva y arquitectónica muy actual. Los ejemplos elegidos, por su intencionalidad, su diseño, y su sentido utilitario, constructivo y semiótico, se analizan desde el hecho acumulativo y el hecho reactivo, mediante el procedimiento de contrastar diversas fuentes de información. Objetivos. El análisis de cada una de las viviendas procedentes de diferentes arquitectos, se hace mediante la simulación de modelos que permitan describir la parte esencial del comportamiento de un sistema de interés, así como diseñar y realizar experimentos con el modelo para extraer conclusiones de sus resultados y apoyar la toma de decisiones proyectual. Procedimiento. En una primera fase, el medio natural queda definido por su localización, interpretación del lugar, el clima concreto (mediante climogramas generales y de isopletas), determinando un diagnóstico medioambiental para el establecimiento de estrategias a partir de los datos experimentales a contrastar con el resultado finalmente obtenido. En una segunda fase se eligen los casos más representativos de LowTech / LowEnergy y HighTech / HighEnergy. Se realiza un análisis del modelo, frente a uno de los elementos predominantes: sol, aire, agua, tierra, luna, vegetación y miscelánea. Resultados. De los casos estudiados se extraen principios aplicables en cada uno de los ámbitos: medioambiental, relacionados con la adaptabilidad energética; constructivo, en relación con la economía; y arquitectónico, vinculado con lo social, con una perspectiva diferente sobre los nuevos espacios vivibles. Conclusiones y relevancia. En los emplazamientos estudiados, los arquitectos herederos del movimiento moderno, han utilizado los recursos medioambientales pasivos y activos más actuales en cada uno de los elementos, así como la orientación, la ventilación, la radiación, la inercia térmica,…las actitudes más contemporáneas como expertos bioclimáticos. Los principios extraídos deben facilitar un proceso proyectual mediante pautas experimentales a desarrollar sin un uso desmesurado de la tecnología. Los principios y las conclusiones obtenidos servirán de aplicación a nuevos modelos conociendo los parámetros más relevantes. La modelización analógica - digital permitirá evaluar el comportamiento más aplicable según las necesidades a satisfacer. Objectives. Architectural analysis through the prism of sustainability with three aims: energy consumption, building technique and architectonical resources. The study is focused on some key examples of low density houses since 1973 (featured by the Oil crisis) until the 11th September 2001´s ideological change. These living spaces are settled in similar microclimates although in different latitudes with strong possibilities for applications in Mediterranean climates. Examples. Seven remote detached dwellings with different conceptual characters, located in subtropical climates, in different ecosystems, however with a sustainable basis and architectonical building concepts very updated. The cultural objects chosen, due to legitimate reasons such as: purpose, a plan, an utilitarian sense, constructive and semiotic, are analyzed under an accumulative perspective along with the reactive fact as the procedure to contrast and compare different sources of information. Goals. The analysis of the examples of different architects, will be done in order to simulate through models which describe and display the essential part of behaviour that corresponds to an interest system, along with the design and to try out or experiment with the model and to draw up results which support the projecting decision process. Procedure. On a first stage, the natural environment is shaped by its location, interpretation of the pace, a particular climate (through general climograms and isophlets), determining an environmental diagnosis which would be able to generate scientific conclusions in order to develop adequate strategies. Hence from experimental data we contrast with the results. On a second stage the more representative cases of LowTech / LowEnergy and HighTech / HighEnergy are choosen. We analyze the model taking into consideration and facing a key element: sun, air, water, soil, moon, vegetation and miscellany. Results. From the study cases we draw up applicable principles in each field: the ecological in relation with energetic adaptability, the constructive potential related with economy, and the social in relation with a different perspective about new architectural living spaces. Conclusions and Relevance. On those settlements studied, the heirs architects from Modern Movement, had used the passive and active, updated environmental resources in each element. For instance, aspects like orientation, ventilation, solar radiation, thermal inertia…, and the most contemporary attitude as bioclimatic expert that they are. These principles speed up through experimental guidelines, the technology is diminished and the design process be provided. The principles and conclusions generated will be useful in order to apply new models because we are able to know the most relevant key parameters. The analogical-digital modelizations allow us to revaluate the applicable behaviour according to the needs to satisfy.

El microclima urbano en los espacios abiertos : estudio de casos en Madrid

El microclima urbano juega un rol importante en el consumo energético de los edificios y en las sensaciones de confort en los espacios exteriores. La urgente necesidad de aumentar la eficiencia energética, reducir las emisiones de los contaminantes y paliar la evidente falta de sostenibilidad que afecta a las ciudades, ha puesto la atención en el urbanismo bioclimático como referente para una propuesta de cambio en la forma de diseñar y vivir la ciudad. Hasta ahora las investigaciones en temas de microclima y eficiencia energética se han concentrado principalmente en como orientar el diseño de nuevos desarrollo. Sin embargo los principales problemas de la insostenibilidad de las actuales conurbaciones son el resultado del modelo de crecimiento especulativo y altamente agotador de recursos que han caracterizado el boom inmobiliario de las últimas décadas. Vemos entonces, tanto en España como en el resto de los Países Europeos, la necesidad de reorientar el sector de la construcción hacía la rehabilitación del espacio construido, como una alternativa capaz de dar una solución más sostenible para el mercado inmobiliario. En este propósito de mejorar la calidad de las ciudades actuales, el espacio público juega un papel fundamental, sobre todo como lugar para el encuentro y la socialización entre los ciudadanos. La sensación térmica condiciona la percepción de un ambiente, así que el microclima puede ser determinante para el éxito o el fracaso de un espacio urbano. Se plantea entonces cómo principal objetivo de la investigación, la definición de estrategias para el diseño bioclimático de los entornos urbanos construidos, fundamentados en las componentes morfotipológica, climática y de los requerimientos de confort para los ciudadanos. Como ulterior elemento de novedad se decide estudiar la rehabilitación de los barrios de construcción de mediado del siglo XX, que en muchos casos constituyen bolsas de degrado en la extendida periferia de las ciudades modernas. La metodología empleada para la investigación se basa en la evaluación de las condiciones climáticas y de confort térmico de diferentes escenarios de proyecto, aplicados a tres casos de estudio situados en un barrio periurbano de la ciudad de Madrid. Para la determinación de los parámetros climáticos se han empleado valores obtenidos con un proceso de simulación computarizada, basados en los principios de fluidodinámica, termodinámica y del intercambio radioactivo en el espacio construido. A través de uso de programas de simulación podemos hacer una previsión de las condiciones microclimáticas de las situaciones actuales y de los efectos de la aplicación de medidas. La gran ventaja en el uso de sistemas de cálculo es que se pueden evaluar diferentes escenarios de proyecto y elegir entre ellos el que asegura mejores prestaciones ambientales. Los resultados obtenidos en los diferentes escenarios han sido comparados con los valores de confort del estado actual, utilizando como indicador de la sensación térmica el índice UTCI. El análisis comparativo ha permitido la realización de una tabla de resumen donde se muestra la evaluación de las diferentes soluciones de rehabilitación. Se ha podido así demostrar que no existe una solución constructiva eficaz para todas las aplicaciones, sino que cada situación debe ser estudiada individualmente, aplicando caso por caso las medidas más oportunas. Si bien los sistemas de simulación computarizada pueden suponer un importante apoyo para la fase de diseño, es responsabilidad del proyectista emplear las herramientas más adecuadas en cada fase y elegir las soluciones más oportunas para cumplir con los objetivos del proyecto. The urban microclimate plays an important role on buildings energy consumption and comfort sensation in exterior spaces. Nowadays, cities need to increase energy efficiency, reduce the pollutants emissions and mitigate the evident lack of sustainability. In reason of this, attention has focused on the bioclimatic urbanism as a reference of change proposal of the way to design and live the city. Hitherto, the researches on microclimate and energy efficiency have mainly concentrated on guiding the design of new constructions. However the main problems of unsustainability of existing conurbations are the result of the growth model highly speculative and responsible of resources depletion that have characterized the real estate boom of recent decades. In Spain and other European countries, become define the need to redirect the construction sector towards urban refurbishment. This alternative is a more sustainable development model and is able to provide a solution for the real estate sector. In order to improve the quality of today's cities, the public space plays a key role, especially in order to provide to citizens places for meeting and socializing. The thermal sensation affects the environment perception, so microclimate conditions can be decisive for the success or failure of urban space. For this reasons, the main objective of this work is focused on the definition of bioclimatic strategies for existing urban spaces, based on the morpho-typological components, climate and comfort requirements for citizens. As novelty element, the regeneration of neighborhoods built in middle of the twentieth century has been studied, because are the major extended in periphery of modern cities and, in many cases, they represent deprived areas. The research methodology is based on the evaluation of climatic conditions and thermal comfort of different project scenarios, applied to three case studies located in a suburban neighborhood of Madrid. The climatic parameters have been obtained by computer simulation process, based on fluid dynamics, thermodynamics and radioactive exchange in urban environment using numerical approach. The great advantage in the use of computing systems is the capacity for evaluate different project scenarios. The results in the different scenarios were compared with the comfort value obtained in the current state, using the UTCI index as indicator of thermal sensation. Finally, an abacus of the thermal comfort improvement obtained by different countermeasures has been performed. One of the major achievement of doctoral work is the demonstration of there are not any design solution suitable for different cases. Each situation should be analyzed and specific design measures should be proposed. Computer simulation systems can be a significant support and help the designer in the decision making phase. However, the election of the most suitable tools and the appropriate solutions for each case is designer responsibility.

Geometric tools in Juan de Álava's stonecutting workshop

Stonemasonry of the Gothic vault in its totality is based upon geometry of the line, whereas classic stereotomy relies on the comprehensive knowledge of the surface and the highly sophisticated sides of the voussoirs necessary for its vaults. It is obvious that this leap in the art of construction was paralleled and accompanied by an extension of the horizons of geometry. In Spain, it was made possible thanks to the centuries-old tradition of stone building begun in the most remote medieval times and to the presence of outstanding architects or stonemasons such as Juan de Álava, whose professional work surpassed the established limits and provided the art of building with new instruments.

An empirical mixed model to quantify climate influence on the growth of Pinus halepensis Mill. stands in South-Eastern Spain

The influence of climate on forest stand composition, development and growth is undeniable. Many studies have tried to quantify the effect of climatic variables on forest growth and yield. These works become especially important because there is a need to predict the effects of climate change on the development of forest ecosystems. One of the ways of facing this problem is the inclusion of climatic variables into the classic empirical growth models. The work has a double objective: (i) to identify the indicators which best describe the effect of climate on Pinus halepensis growth and (ii) to quantify such effect in several scenarios of rainfall decrease which are likely to occur in the Mediterranean area. A growth mixed model for P. halepensis including climatic variables is presented in this work. Growth estimates are based on data from the Spanish National Forest Inventory (SNFI). The best results are obtained for the indices including rainfall, or rainfall and temperature together, with annual precipitation, precipitation effectiveness, Emberger?s index or free bioclimatic intensity standing out among them. The final model includes Emberger?s index, free bioclimatic intensity and interactions between competition and climate indices. The results obtained show that a rainfall decrease about 5% leads to a decrease in volume growth of 5.5?7.5% depending on site quality.

Use of prediction methods for patent and trademark applications in Spain

Patent and trademark offices which run according to principles of new management have an inherent need for dependable forecasting data in planning capacity and service levels. The ability of the Spanish Office of Patents and Trademarks to carry out efficient planning of its resource needs requires the use of methods which allow it to predict the changes in the number of patent and trademark applications at different time horizons. The approach for the prediction of time series of Spanish patents and trademarks applications (1979e2009) was based on the use of different techniques of time series prediction in a short-term horizon. The methods used can be grouped into two specifics areas: regression models of trends and time series models. The results of this study show that it is possible to model the series of patents and trademarks applications with different models, especially ARIMA, with satisfactory model adjustment and relatively low error.

Foundations of a New Interaction Paradigm for Immersive 3D Multimedia

Immersion and interaction have been identified as key factors influencing the quality of experience in stereoscopic video systems. The work presented here aims to create a new paradigm for 3D Multimedia consumption exploiting these factors in order to increase user involvement. We use a 5-sided CAVETM environment to support 3D panoramic video reproduction, real-time insertion of synthetic objects into the three-dimensional scene and real-time user interaction with the inserted elements. In this paper we describe our system requirements, functionalities, conceptual design and preliminary implementation results emphasizing the most relevant challenges accomplished. The focus is on three main issues: the generation of stereoscopic video panoramas; the synchronous reproduction of immersive 3D video across multiple screens; and, the real-time insertion algorithm implemented for the integration of synthetic objects into the stereoscopic video. These results have been successfully integrated into the graphic engine managing the operation of the CAVETM infrastructure.

Commonalities between networking in multiplayer computer games and negotiation processes in a future multi-layered Air Traffic Management (ATM) system

First, this paper describes a future layered Air Traffic Management (ATM) system centred in the execution phase of flights. The layered ATM model is based on the work currently performed by SESAR [1] and takes into account the availability of accurate and updated flight information ?seen by all? across the European airspace. This shared information of each flight will be referred as Reference Business Trajectory (RBT). In the layered ATM system, exchanges of information will involve several actors (human or automatic), which will have varying time horizons, areas of responsibility and tasks. Second, the paper will identify the need to define the negotiation processes required to agree revisions to the RBT in the layered ATM system. Third, the final objective of the paper is to bring to the attention of researchers and engineers the communalities between multi-player games and Collaborative Decision Making processes (CDM) in a layered ATM system

Carbonatos en suelos de la zona oriental de Gran Canaria

The study of three soil profiles in the aridic-xeric zone of Las Palmas island showed that: petrocalcic horizons are formed in pyroclastic episodes; these horizons are generally thick; the xeric zone frequently have polycyclic profiles and their carbonates have complex mineralogy; underlain basaltic rocks are scantly altered, and their joints are frequently filled by carbonates. These facts suggest that the development of these profiles is mostly Pleistocene, and the diffuse carbonates accumulation in depth obstructs the assessment of carbonatation processes.

Statistical models for short-term wind power ramp forecasting

La predicción de energía eólica ha desempeñado en la última década un papel fundamental en el aprovechamiento de este recurso renovable, ya que permite reducir el impacto que tiene la naturaleza fluctuante del viento en la actividad de diversos agentes implicados en su integración, tales como el operador del sistema o los agentes del mercado eléctrico. Los altos niveles de penetración eólica alcanzados recientemente por algunos países han puesto de manifiesto la necesidad de mejorar las predicciones durante eventos en los que se experimenta una variación importante de la potencia generada por un parque o un conjunto de ellos en un tiempo relativamente corto (del orden de unas pocas horas). Estos eventos, conocidos como rampas, no tienen una única causa, ya que pueden estar motivados por procesos meteorológicos que se dan en muy diferentes escalas espacio-temporales, desde el paso de grandes frentes en la macroescala a procesos convectivos locales como tormentas. Además, el propio proceso de conversión del viento en energía eléctrica juega un papel relevante en la ocurrencia de rampas debido, entre otros factores, a la relación no lineal que impone la curva de potencia del aerogenerador, la desalineación de la máquina con respecto al viento y la interacción aerodinámica entre aerogeneradores. En este trabajo se aborda la aplicación de modelos estadísticos a la predicción de rampas a muy corto plazo. Además, se investiga la relación de este tipo de eventos con procesos atmosféricos en la macroescala. Los modelos se emplean para generar predicciones de punto a partir del modelado estocástico de una serie temporal de potencia generada por un parque eólico. Los horizontes de predicción considerados van de una a seis horas. Como primer paso, se ha elaborado una metodología para caracterizar rampas en series temporales. La denominada función-rampa está basada en la transformada wavelet y proporciona un índice en cada paso temporal. Este índice caracteriza la intensidad de rampa en base a los gradientes de potencia experimentados en un rango determinado de escalas temporales. Se han implementado tres tipos de modelos predictivos de cara a evaluar el papel que juega la complejidad de un modelo en su desempeño: modelos lineales autorregresivos (AR), modelos de coeficientes variables (VCMs) y modelos basado en redes neuronales (ANNs). Los modelos se han entrenado en base a la minimización del error cuadrático medio y la configuración de cada uno de ellos se ha determinado mediante validación cruzada. De cara a analizar la contribución del estado macroescalar de la atmósfera en la predicción de rampas, se ha propuesto una metodología que permite extraer, a partir de las salidas de modelos meteorológicos, información relevante para explicar la ocurrencia de estos eventos. La metodología se basa en el análisis de componentes principales (PCA) para la síntesis de la datos de la atmósfera y en el uso de la información mutua (MI) para estimar la dependencia no lineal entre dos señales. Esta metodología se ha aplicado a datos de reanálisis generados con un modelo de circulación general (GCM) de cara a generar variables exógenas que posteriormente se han introducido en los modelos predictivos. Los casos de estudio considerados corresponden a dos parques eólicos ubicados en España. Los resultados muestran que el modelado de la serie de potencias permitió una mejora notable con respecto al modelo predictivo de referencia (la persistencia) y que al añadir información de la macroescala se obtuvieron mejoras adicionales del mismo orden. Estas mejoras resultaron mayores para el caso de rampas de bajada. Los resultados también indican distintos grados de conexión entre la macroescala y la ocurrencia de rampas en los dos parques considerados. Abstract One of the main drawbacks of wind energy is that it exhibits intermittent generation greatly depending on environmental conditions. Wind power forecasting has proven to be an effective tool for facilitating wind power integration from both the technical and the economical perspective. Indeed, system operators and energy traders benefit from the use of forecasting techniques, because the reduction of the inherent uncertainty of wind power allows them the adoption of optimal decisions. Wind power integration imposes new challenges as higher wind penetration levels are attained. Wind power ramp forecasting is an example of such a recent topic of interest. The term ramp makes reference to a large and rapid variation (1-4 hours) observed in the wind power output of a wind farm or portfolio. Ramp events can be motivated by a broad number of meteorological processes that occur at different time/spatial scales, from the passage of large-scale frontal systems to local processes such as thunderstorms and thermally-driven flows. Ramp events may also be conditioned by features related to the wind-to-power conversion process, such as yaw misalignment, the wind turbine shut-down and the aerodynamic interaction between wind turbines of a wind farm (wake effect). This work is devoted to wind power ramp forecasting, with special focus on the connection between the global scale and ramp events observed at the wind farm level. The framework of this study is the point-forecasting approach. Time series based models were implemented for very short-term prediction, this being characterised by prediction horizons up to six hours ahead. As a first step, a methodology to characterise ramps within a wind power time series was proposed. The so-called ramp function is based on the wavelet transform and it provides a continuous index related to the ramp intensity at each time step. The underlying idea is that ramps are characterised by high power output gradients evaluated under different time scales. A number of state-of-the-art time series based models were considered, namely linear autoregressive (AR) models, varying-coefficient models (VCMs) and artificial neural networks (ANNs). This allowed us to gain insights into how the complexity of the model contributes to the accuracy of the wind power time series modelling. The models were trained in base of a mean squared error criterion and the final set-up of each model was determined through cross-validation techniques. In order to investigate the contribution of the global scale into wind power ramp forecasting, a methodological proposal to identify features in atmospheric raw data that are relevant for explaining wind power ramp events was presented. The proposed methodology is based on two techniques: principal component analysis (PCA) for atmospheric data compression and mutual information (MI) for assessing non-linear dependence between variables. The methodology was applied to reanalysis data generated with a general circulation model (GCM). This allowed for the elaboration of explanatory variables meaningful for ramp forecasting that were utilized as exogenous variables by the forecasting models. The study covered two wind farms located in Spain. All the models outperformed the reference model (the persistence) during both ramp and non-ramp situations. Adding atmospheric information had a noticeable impact on the forecasting performance, specially during ramp-down events. Results also suggested different levels of connection between the ramp occurrence at the wind farm level and the global scale.