Virtual Instruments in Dimensional Metrology

During the last five years, in order to improve understanding of content related to "Coordinate Metrology", the Laboratorio de Metrología y Metrotecnia (LMM) from the Polytechnic University of Madrid offers its PhD students, as a course work, the construction of a virtual instrument. This virtual instrument simulates the imaging of a part to be measured by optical dimensional metrology instruments (microscopes, profile projectors, vision machines). The LMM provides students with images similar to those they would obtain with real instrumentation for the instrument adjustment and calibration process. Working with these images, students should determine the adjustment parameters of the virtual instrument. Once these parameters are set, the student can perform the proper calibration of the virtual instrument. Beyond this process, the instrument is already able to perform traceable measurement. In order to do that, LMM offers students some images of parts. Students should perform some measurements using those images and estimate the corresponding uncertainties.

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing.

Considerations on the success rate in aeronautical engineering studies in Spain

The relationship between different learning evaluation methods and the academic success in an aeronautical engineering degree in Spain is analysed. The study is based on data about the evolution of academic achievement obtained along the last ten year, along which the evaluation and learning’s methods have suffered huge changes.

Desarrollo de un datalink con el chip CC1110 de Texas Instruments para UAVs

Se trata de estudiar el comportamiento de un sistema basado en el chip CC1110 de Texas Instruments, para aplicaciones inalámbricas. Los dispositivos basados en este tipo de chips tienen actualmente gran profusión, dada la demanda cada vez mayor de aplicaciones de gestión y control inalámbrico. Por ello, en la primera parte del proyecto se presenta el estado del arte referente a este aspecto, haciendo mención a los sistemas operativos embebidos, FPGAs, etc. También se realiza una introducción sobre la historia de los aviones no tripulados, que son el vehículo elegido para el uso del enlace de datos. En una segunda parte se realiza el estudio del dispositivo mediante una placa de desarrollo, verificando y comprobando mediante el software suministrado, el alcance del mismo. Cabe resaltar en este punto que el control con la placa mencionada se debe hacer mediante programación de bajo nivel (lenguaje C), lo que aporta gran versatilidad a las aplicaciones que se pueden desarrollar. Por ello, en una tercera parte se realiza un programa funcional, basado en necesidades aportadas por la empresa con la que se colabora en el proyecto (INDRA). Este programa es realizado sobre el entorno de Matlab, muy útil para este tipo de aplicaciones, dada su versatilidad y gran capacidad de cálculo con variables. Para terminar, con la realización de dichos programas, se realizan pruebas específicas para cada uno de ellos, realizando pruebas de campo en algunas ocasiones, con vehículos los más similares a los del entorno real en el que se prevé utilizar. Como implementación al programa realizado, se incluye un manual de usuario con un formato muy gráfico, para que la toma de contacto se realice de una manera rápida y sencilla. Para terminar, se plantean líneas futuras de aplicación del sistema, conclusiones, presupuesto y un anexo con los códigos de programación más importantes. Abstract In this document studied the system behavior based on chip CC1110 of Texas Instruments, for wireless applications. These devices currently have profusion. Right the increasing demand for control and management wireless applications. In the first part of project presents the state of art of this aspect, with reference to the embedded systems, FPGAs, etc. It also makes a history introduction of UAVs, which are the vehicle for use data link. In the second part is studied the device through development board, verifying and checking with provided software the scope. The board programming is C language; this gives a good versatility to develop applications. Thus, in third part performing a functionally program, it based on requirements provided by company with which it collaborates, INDRA Company. This program is developed with Matlab, very useful for such applications because of its versatility and ability to use variables. Finally, with the implementation of such programs, specific tests are performed for each of them, field tests are performed in several cases, and vehicles used for this are the most similar to the actual environment plain to use. Like implementing with the program made, includes a graphical user manual, so your understanding is conducted quickly and easily. Ultimately, present future targets for system applications, conclusions, budget and annex of the most important programming codes.

Aeronautical Information Geoservices

Aeronautical charts underlie the representation of aeronautic geographic information that supports pilots in flight. Nevertheless, charts become complex due to the high density of data and the different kinds that support each phase of flight. These features make difficult using them on board. After conducting a study that aims to understand and to evaluate pilot’s needs related to Geographic Information, it is proposed a solution to implement a platform based on geographic information standards (OGC, ISO) and supported by a distributed Web architecture. This platform facilitates the use, retrieval, updating of information and its exchange among different institutions through private and public users. As a first element to ensure interoperability and the harmonisation of information, we propose an aeronautical metadata profile that sets guidelines and elements for its description. This profile meets the standards set by ICAO, Eurocontrol and ISO. The platform offers three levels of access to data through different types of devices and user profiles. This paper suggests an alternative and reliable way for distributing aeronautical geoinformation, focusing on specific functions or displaying and querying.

Aeronautical Metadata Profile based on Geographic International Standards

The aeronautical information plays an essential rolein air safety, chief objective of the aeronautical industry. Community policies and projects are being currently developed for the adequate management of a single European air space. To make this possible, an appropriate information management and a set of tools that allow sharing and exchanging this information, ensuring its interoperability and integrity, are necessary. This paper presents the development and implementation of a metadata profile for description of the aeronautical information based on international regulations and recommendations applied within the geographic scope. The elements taken into account for its development are described, as well as the implementation process and the results obtained.

Geoservices for Aeronautical Navigation

Aeronautical charts underlie the representation of aeronautic geographic information that supports pilots in flight. Nevertheless, the charts become complex due to the high density of data and the different kinds of charts that support each phase of flight. These features make difficult using them on board. After conducting a study, with civil Spaniard pilots, that aims to understand and to evaluate their needs related to Geographic Information, it is proposed a solution to implement a platform based on geographic information standards (OGC, ISO) and supported by a distributed Web architecture. This platform facilitates the use, retrieval, updating of information and its exchange among different institutions through private and public users. As a first element to ensure interoperability of information, we suggest an aeronautical metadata profile that sets guidelines and elements for its description. The metadata profile meets the standards set by ICAO, Eurocontrol and ISO. The platform offers three levels of access to data through different types of devices and user profiles. Thus, aeronautical institutions could edit data while pilot is on board accessing digital aeronautical charts through a laptop or Table PC. This paper suggests an alternative and reliable way for distributing aeronautical geoinformation, focusing on specific functions or displaying and querying.

Project based learning activities as a means of adapting conventional curricula to the demands of the 21st century aeronautical engineer: The design and building of the EYEFLY 1.

In this paper we report the process of designing and building the EYEFLY 1, a real UAS platform which has just performed its maiden flight. For the development of this aircraft, 30 groups of students from successive years at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) of the Universidad Politécnica de Madrid (UPM) carried out their compulsory End of Degree Project as a coordinated Project Based learning activity. Our conclusions clearly indicate that Project Based Learning activities can provide a valid complement to more conventional, theoretically-based, teaching methods. The combination of both approaches will allow us to maintain traditional but well-tested methods for providing our students with a sound knowledge of fundamental engineering disciplines and, at the same time, to introduce our students to exciting and relevant engineering situations and sceneries where social and business skills, such as communication skills, team-working or decision-taking, can be put into practice.

Correlation study between motion analysis of laparoscopic instruments and a suturing checklist

Purpose: To compare assessment capabilities of a motion analysis tool against a validated checklist during laparoscopic training.

Supervised classification of minimally invasive surgery psychomotor competence based on instruments motion analysis

Background Objective assessment of psychomotor skills has become an important challenge in the training of minimally invasive surgical (MIS) techniques. Currently, no gold standard defining surgical competence exists for classifying residents according to their surgical skills. Supervised classification has been proposed as a means for objectively establishing competence thresholds in psychomotor skills evaluation. This report presents a study comparing three classification methods for establishing their validity in a set of tasks for basic skills’ assessment. Methods Linear discriminant analysis (LDA), support vector machines (SVM), and adaptive neuro-fuzzy inference systems (ANFIS) were used. A total of 42 participants, divided into an experienced group (4 expert surgeons and 14 residents with >10 laparoscopic surgeries performed) and a nonexperienced group (16 students and 8 residents with <10 laparoscopic surgeries performed), performed three box trainer tasks validated for assessment of MIS psychomotor skills. Instrument movements were captured using the TrEndo tracking system, and nine motion analysis parameters (MAPs) were analyzed. The performance of the classifiers was measured by leave-one-out cross-validation using the scores obtained by the participants. Results The mean accuracy performances of the classifiers were 71 % (LDA), 78.2 % (SVM), and 71.7 % (ANFIS). No statistically significant differences in the performance were identified between the classifiers. Conclusions The three proposed classifiers showed good performance in the discrimination of skills, especially when information from all MAPs and tasks combined were considered. A correlation between the surgeons’ previous experience and their execution of the tasks could be ascertained from results. However, misclassifications across all the classifiers could imply the existence of other factors influencing psychomotor competence.

Proposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept

The design of a Final Assembly Line (FAL) is carry out in the product industrialization activity. The phase dealing with the definition of conceptual solutions is characterized by depending heavily on the personnel experience and being time-consuming. To enhance such process, it is proposed a development of a knowledge based software application to assist designers in the definition of scenarios and to generate conceptual FAL alternatives. Both the scenario and the generated FAL solution are part of the industrialization digital mock-up (IDMU). A commercial software application used in the aircraft programmes and supporting the IDMU concepts of: Product, Process and Resource; was selected to implement a software prototype. This communication presents the adopted methodological approach and the architecture of the developed application.

Smart aeronautical structures: development and experimental validation of a structural health monitoring system for damage detection

En muchas áreas de la ingeniería, la integridad y confiabilidad de las estructuras son aspectos de extrema importancia. Estos son controlados mediante el adecuado conocimiento de danos existentes. Típicamente, alcanzar el nivel de conocimiento necesario que permita caracterizar la integridad estructural implica el uso de técnicas de ensayos no destructivos. Estas técnicas son a menudo costosas y consumen mucho tiempo. En la actualidad, muchas industrias buscan incrementar la confiabilidad de las estructuras que emplean. Mediante el uso de técnicas de última tecnología es posible monitorizar las estructuras y en algunos casos, es factible detectar daños incipientes que pueden desencadenar en fallos catastróficos. Desafortunadamente, a medida que la complejidad de las estructuras, los componentes y sistemas incrementa, el riesgo de la aparición de daños y fallas también incrementa. Al mismo tiempo, la detección de dichas fallas y defectos se torna más compleja. En años recientes, la industria aeroespacial ha realizado grandes esfuerzos para integrar los sensores dentro de las estructuras, además de desarrollar algoritmos que permitan determinar la integridad estructural en tiempo real. Esta filosofía ha sido llamada “Structural Health Monitoring” (o “Monitorización de Salud Estructural” en español) y este tipo de estructuras han recibido el nombre de “Smart Structures” (o “Estructuras Inteligentes” en español). Este nuevo tipo de estructuras integran materiales, sensores, actuadores y algoritmos para detectar, cuantificar y localizar daños dentro de ellas mismas. Una novedosa metodología para detección de daños en estructuras se propone en este trabajo. La metodología está basada en mediciones de deformación y consiste en desarrollar técnicas de reconocimiento de patrones en el campo de deformaciones. Estas últimas, basadas en PCA (Análisis de Componentes Principales) y otras técnicas de reducción dimensional. Se propone el uso de Redes de difracción de Bragg y medidas distribuidas como sensores de deformación. La metodología se validó mediante pruebas a escala de laboratorio y pruebas a escala real con estructuras complejas. Los efectos de las condiciones de carga variables fueron estudiados y diversos experimentos fueron realizados para condiciones de carga estáticas y dinámicas, demostrando que la metodología es robusta ante condiciones de carga desconocidas. ABSTRACT In many engineering fields, the integrity and reliability of the structures are extremely important aspects. They are controlled by the adequate knowledge of existing damages. Typically, achieving the level of knowledge necessary to characterize the structural integrity involves the usage of nondestructive testing techniques. These are often expensive and time consuming. Nowadays, many industries look to increase the reliability of the structures used. By using leading edge techniques it is possible to monitoring these structures and in some cases, detect incipient damage that could trigger catastrophic failures. Unfortunately, as the complexity of the structures, components and systems increases, the risk of damages and failures also increases. At the same time, the detection of such failures and defects becomes more difficult. In recent years, the aerospace industry has done great efforts to integrate the sensors within the structures and, to develop algorithms for determining the structural integrity in real time. The ‘philosophy’ has being called “Structural Health Monitoring” and these structures have been called “smart structures”. These new types of structures integrate materials, sensors, actuators and algorithms to detect, quantify and locate damage within itself. A novel methodology for damage detection in structures is proposed. The methodology is based on strain measurements and consists in the development of strain field pattern recognition techniques. The aforementioned are based on PCA (Principal Component Analysis) and other dimensional reduction techniques. The use of fiber Bragg gratings and distributed sensing as strain sensors is proposed. The methodology have been validated by using laboratory scale tests and real scale tests with complex structures. The effects of the variable load conditions were studied and several experiments were performed for static and dynamic load conditions, demonstrating that the methodology is robust under unknown load conditions.

Accessibility instruments for planning practice: bridging the gap between academic research and decision-making.

One of the core objectives of urban planning practice is to provide spatial equity in terms of opportunities and use of public space and facilities. Accessibility is the element that serves this purpose as a concept linking the reciprocal relationship between transport and land use, thus shaping individual potential mobility to reach the desired destinations. Accessibility concepts are increasingly acknowledged as fundamental to understand the functioning of cities and urban regions. Indeed, by introducing them in planning practice, better solutions can be achieved in terms of spatial equity. The COST Action TU1002 "Accessibility instruments for planning practice" was specifically designed to address the gap between scientific research in measuring and modelling accessibility, and the current use of indicators of accessibility in urban planning practice. This paper shows the full process of introducing an easily understandable measure of accessibility to planning practitioners in Madrid, which is one of the case studies of the above-mentioned COST action. Changes in accessibility after the opening of a new metro line using contour measures were analyzed and then presented to a selection of urban planners and practitioners in Madrid as part of a workshop to evaluate the usefulness of this tool for planning practice. Isochrone maps were confirmed as an effective tool, as their utility can be supplemented by other indicators, and being GIS-based, it can be easily computed (when compared with transport models) and integrated with other datasets.

Estudio de la plataforma SensorTag de Texas Instruments para aplicaciones de Redes Inalámbricas de Sensores

El presente proyecto es un estudio teórico-práctico de una plataforma: Multi-Standart Senortag (denominada “Sensortag” en este proyecto). En este contexto se evalúa la viabilidad de Sensortag como plataforma de desarrollo para redes de sensores, y su competitividad en diferentes aspectos respecto a las Cookies, otra plataforma desarrollada por el Centro de Electrónica Industrial (CEI). El objetivo de presente trabajo es estudiar las posibilidades de Sensortag, tanto para medir como procesar y transmitir la información, así como evaluar su simplicidad de uso. Para lograrlo se introducen los conceptos de Red Inalámbrica de Sensores y Internet de Cosas, se desarrolla una serie de aplicaciones prácticas de prueba, y para completar el estudio se propone posibles aplicaciones en la vida real así como vías de investigación futura. El estudio se puede dividir según la siguiente estructura: - Introducción y avances tecnológicos relacionados con el ámbito de estudio (Capítulos 1). - Desarrollo del proyecto (Capítulo 2): - Sensortag: sus características y sus prestaciones. - El estudio del dispositivo, su arquitectura, su diseño de Hardware. - El estudio de las herramientas y del Software que puede soportar: - El procesado – el Sistema Operativo - Transmisión de datos - Protocolos de comunicación - Las pruebas y las aplicaciones realizadas: - Resultados (Capítulo 3) - Experiencia, conclusiones y líneas futuras de investigación (Capítulo 4): - Trabajos previos y experiencia personal, - Resumen y conclusiones del estudio - Propuestas para seguir investigando

Instruments for analysing urban conflicts in the Global South: The case of urban transformation processes in Dakar

Physical and social transformation processes that take place in urban contexts with strong spatial growth and hardly any economic development frequently have significant adverse impacts for the affected people, which tend to be made invisible. This paper presents an analytical framework to explore different ways to approach urban transformation processes (supply side), their impacts on the set of needs of the community (demand side) and their consequences on the urban environment as a whole (context). The proposed method has been used to assess three actions related to the physical and social transformation of the largest self-made settlement in the city of Dakar, Senegal, during the 2005–2012 period. Research findings show how exogenous interests are privileged over the common good when the affected citizens are not effectively involved in decision-making processes.