Simulation of impulse response for indoor visible light communications using 3D CAD models

n this article, a tool for simulating the channel impulse response for indoor visible light communications using 3D computer-aided design (CAD) models is presented. The simulation tool is based on a previous Monte Carlo ray-tracing algorithm for indoor infrared channel estimation, but including wavelength response evaluation. The 3D scene, or the simulation environment, can be defined using any CAD software in which the user specifies, in addition to the setting geometry, the reflection characteristics of the surface materials as well as the structures of the emitters and receivers involved in the simulation. Also, in an effort to improve the computational efficiency, two optimizations are proposed. The first one consists of dividing the setting into cubic regions of equal size, which offers a calculation improvement of approximately 50% compared to not dividing the 3D scene into sub-regions. The second one involves the parallelization of the simulation algorithm, which provides a computational speed-up proportional to the number of processors used.

Evaluating a Speech Communication System for deaf people

This paper describes the development of an Advanced Speech Communication System for Deaf People and its field evaluation in a real application domain: the renewal of Driver’s License. The system is composed of two modules. The first one is a Spanish into Spanish Sign Language (LSE: Lengua de Signos Española) translation module made up of a speech recognizer, a natural language translator (for converting a word sequence into a sequence of signs), and a 3D avatar animation module (for playing back the signs). The second module is a Spoken Spanish generator from sign-writing composed of a visual interface (for specifying a sequence of signs), a language translator (for generating the sequence of words in Spanish), and finally, a text to speech converter. For language translation, the system integrates three technologies: an example-based strategy, a rule-based translation method and a statistical translator. This paper also includes a detailed description of the evaluation carried out in the Local Traffic Office in the city of Toledo (Spain) involving real government employees and deaf people. This evaluation includes objective measurements from the system and subjective information from questionnaires. Finally, the paper reports an analysis of the main problems and a discussion about possible solutions.

Design, development and field evaluation of a Spanish into sign language translation system

This paper describes the design, development and field evaluation of a machine translation system from Spanish to Spanish Sign Language (LSE: Lengua de Signos Española). The developed system focuses on helping Deaf people when they want to renew their Driver’s License. The system is made up of a speech recognizer (for decoding the spoken utterance into a word sequence), a natural language translator (for converting a word sequence into a sequence of signs belonging to the sign language), and a 3D avatar animation module (for playing back the signs). For the natural language translator, three technological approaches have been implemented and evaluated: an example-based strategy, a rule-based translation method and a statistical translator. For the final version, the implemented language translator combines all the alternatives into a hierarchical structure. This paper includes a detailed description of the field evaluation. This evaluation was carried out in the Local Traffic Office in Toledo involving real government employees and Deaf people. The evaluation includes objective measurements from the system and subjective information from questionnaires. The paper details the main problems found and a discussion on how to solve them (some of them specific for LSE).

Translating bus information into sign language for deaf people

This paper describes the application of language translation technologies for generating bus information in Spanish Sign Language (LSE: Lengua de Signos Española). In this work, two main systems have been developed: the first for translating text messages from information panels and the second for translating spoken Spanish into natural conversations at the information point of the bus company. Both systems are made up of a natural language translator (for converting a word sentence into a sequence of LSE signs), and a 3D avatar animation module (for playing back the signs). For the natural language translator, two technological approaches have been analyzed and integrated: an example-based strategy and a statistical translator. When translating spoken utterances, it is also necessary to incorporate a speech recognizer for decoding the spoken utterance into a word sequence, prior to the language translation module. This paper includes a detailed description of the field evaluation carried out in this domain. This evaluation has been carried out at the customer information office in Madrid involving both real bus company employees and deaf people. The evaluation includes objective measurements from the system and information from questionnaires. In the field evaluation, the whole translation presents an SER (Sign Error Rate) of less than 10% and a BLEU greater than 90%.

La aportación de la Península Ibérica a la tecnología naval analizada a través de la interpretación de los documentos y la reproducción de los buques descritos en ellos (1570-1620)

El período de la Historia comprendido entre 1570 y 1620 nos ha dejado un importante conjunto de documentos relacionados con la construcción naval en la Península Ibérica. En una época convulsa en la que los reinos de España y Portugal se aglutinaron bajo una misma Corona, surgen una serie de manuscritos, libros y leyes que reflejan la creciente preocupación de la sociedad por el tema naval. Entre sus páginas encontramos las descripciones del proceso constructivo de los buques que sus autores consideraban más significativos para las demandas que se planteaban en ese momento. Este proceso que combinaba generación de formas y construcción del buque provenía de una secular tradición nacida en el Mediterráneo. Mediante reglas geométricas sencillas, el constructor naval trazaba las secciones centrales y el perfil de la nao, quedando los extremos de la misma (hasta más de la mitad de la eslora) a su buen hacer y experiencia. Las herramientas informáticas de generación de superficies mediante NURBs (Non- Uniform Rational B-spline) permiten reconstruir las formas de los navíos reproduciendo con fiabilidad las carenas de los mismos a partir de los documentos de la época. Mediante un estudio detallado de interpretación de los textos y transcribiendo los procesos, llegamos a obtener con un buen grado de precisión las carenas de los buques descritos en sus páginas. A partir de ahí y mediante el análisis cualitativo y cuantitativo de los parámetros obtenidos es posible valorar si las soluciones representadas por los barcos respondían a las preguntas planteadas por sus autores , la influencia de factores externos a la construcción naval tales como las regulaciones del Estado o identificar su relación con el germen y la expansión de la teoría que ha determinado los efectos de la Ciencia en la Arquitectura Naval. Comenzando por la nao veneciana de 1550, heredera de la secular tradición constructiva mediterránea, hasta llegar a las Reales Ordenanzas promulgadas en 1618, se reproducen hasta nueve carenas a partir de otros tantos documentos, se dibujan sus planos de formas y se exportan para su análisis hidrostático. El trabajo requiere la realización de otros estudios en paralelo necesarios para entender aquellos factores que formaron parte del desarrollo tecnológico naval como son, las unidades de medida en uso en los astilleros, los distintos sistemas de arqueo impuestos por la Corona y la representación de los diferentes instrumentos geométricos de modificación de los parámetros de diseño. A lo largo del trabajo se dan respuesta a interrogantes planteados por la arqueología en relación con el desarrollo de la arquitectura naval poniendo en evidencia que durante este período quedaron establecidos los fundamentos teórico-prácticos de lo que más adelante se convirtió en la ciencia de la ingeniería naval y se plantean nuevos retos para aquellos que deseen continuar la apasionante tarea de la investigación científica de nuestra historia. ABSTRACT The period of the History comprised between 1570 and 1620 has left an important set of shipbuilding documents in the Iberian Peninsula. In a turbulent time in which the kingdoms of Spain and Portugal were ruled under the same Crown, manuscripts, books and laws that reflect the growing concern of society for the naval theme arose. We found among their pages shipbuilding process descriptions of the more relevant vessels that responded to claims that arose at that time. This process brought together hull generation and shipbuilding and came from a secular tradition born in the Mediterranean. By means of simple geometric rules, the shipbuilder traced the central sections and profile of the ship, leaving the ends thereof (almost half of the length) to its good performance and experience. 3D computer modelling software by NURBs (Non-Uniform Rational B-spline) surfaces helps to reconstruct ships hulls from contemporary documents. Through a detailed texts interpretation and transcription processes, we manage to reach with a good degree of accuracy the ship hulls described in its pages. From there and through qualitative and quantitative analysis of the parameters obtained we can assess whether the solutions represented by ships gave response to the questions raised by the authors, the influence of external factors such as shipbuilding state regulations or identify their relationship to the origin and expansion of the theory that has determined the effects of Science in Naval Architecture. From the 1550 Venetian nao, inheritor of the secular Mediterranean building tradition, to the Royal Ordinances enacted in 1618, as nine hulls are reproduced, their line drawings are traced and exported for analysis hydrostatic. Further studies are needed to understand the factors that were part of shipbuilding technology development as the units of measure in use in shipyards, the different official regulations for calculating ship tonnage and the different geometric instruments to amend the design parameters. The work gives response to questions raised by archaeology in relation to the development of naval architecture highlighting that during this period were established the theoretical and practical foundations of what later became the science of naval engineering and raising new challenges for those wishing to continue the exciting task of scientific research of our History.

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper

Introducción a Blender

El mundo de la animación 3D está en plena actualidad en este momento. Salas de cine, programas de televisión y la publicidad nos muestran constantemente personajes y objetos animados creados por ordenador. Son muchos los programas que pueden usarse para la realización de animación en 3D. En este proyecto vamos a centrarnos en Blender. Blender es un programa de animación y modelado que se puede obtener de manera gratuita por internet. Se trata de un programa de software libre, por lo que constantemente está siendo modificado gracias a la aportación de usuarios anónimos por internet. El objetivo de este proyecto es la creación de un corto de animación de un minuto de duración con Blender, para lo cual serán necesarias una serie de pautas iniciales sobre cómo funciona Blender y sus posibilidades. La primera parte de este proyecto es una guía básica sobre Blender y sus características. Capítulo a capítulo se irán describiendo la interfaz del programa y la creación de objetos (modelado, asignación de materiales y texturas) para luego aprender a animarlos y a visualizarlos como imágenes o video. La segunda parte se centra en el corto MOL. Creado a partir de los conocimientos adquiridos en la guía anterior, añadiendo en algunos casos, nuevas propiedades necesarias para su elaboración. Se describirán cada uno de los elementos y su creación. Esta guía pretende ser un referente para aquel que quiera introducirse en el mundo de la animación 3D con Blender. The world of 3D animation is a trending topic nowadays. Cinema, television and advertising constantly show us characters and animated objects created with computer graphics. There are many programs that can be used to perform 3D animations. In this project we will focus on Blender. Blender is a modeling and animation program that is available for free online. Blender is an open source program, so it is constantly being modified and improved by anonymous online users. The objective of this project is to create a one-minute animation short with Blender, for which we will require an initial set of guidelines on how Blender works and its possibilities. The first part of this project is a basic guide and will only cover basic features of Blender. In each chapter we will describe the interface and how to create objects (modeling, assigning materials and textures) and then we will learn to animate these objects and to display them as images or video. The second part focuses on the short film MOL. Created from the knowledge gained in the previous guide adding, in same cases, new properties necessary for its creation. We will describe each of the elements involved in the making of. This guide is intended to be a referent guide for anyone who wants to enter the world of 3D animation with Blender.

3D hp-adaptive finite element simulations of a magic-T electromagnetic waveguide structure

This paper employs a 3D hp self-adaptive grid-refinement finite element strategy for the solution of a particular electromagnetic waveguide structure known as Magic-T. This structure is utilized as a power divider/combiner in communication systems as well as in other applications. It often incorporates dielectrics, metallic screws, round corners, and so on, which may facilitate its construction or improve its design, but significantly difficult its modeling when employing semi-analytical techniques. The hp-adaptive finite element method enables accurate modeling of a Magic-T structure even in the presence of these undesired materials/geometries. Numerical results demonstrate the suitability of the hp-adaptive method for modeling a Magic-T rectangular waveguide structure, delivering errors below 0.5% with a limited number of unknowns. Solutions of waveguide problems delivered by the self-adaptive hp-FEM are comparable to those obtained with semi-analytical techniques such as the Mode Matching method, for problems where the latest methods can be applied. At the same time, the hp-adaptive FEM enables accurate modeling of more complex waveguide structures.

Posibilidades del motor 3D de la Nintendo DS

La consola portátil Nintendo DS es una plataforma de desarrollo muy presente entre la comunidad de desarrolladores independientes, con una extensa y nutrida escena homebrew. Si bien las capacidades 2D de la consola están muy aprovechadas, dado que la mayor parte de los esfuerzos de los creadores amateur están enfocados en este aspecto, el motor 3D de ésta (el que se encarga de representar en pantalla modelos tridimensionales) no lo está de igual manera. Por lo tanto, en este proyecto se tiene en vista determinar las capacidades gráficas de la Nintendo DS. Para ello se ha realizado una biblioteca de funciones en C que permite aprovechar las posibilidades que ofrece la consola en el terreno 3D y que sirve como herramienta para la comunidad homebrew para crear aplicaciones 3D de forma sencilla, dado que se ha diseñado como un sistema modular y accesible. En cuanto al proceso de renderizado se han sacado varias conclusiones. En primer lugar se ha determinado la posibilidad de asignar varias componentes de color a un mismo vértice (color material reactivo a la iluminación, color por vértice directo y color de textura), tanto de forma independiente como simultáneamente, pudiéndose utilizar para aplicar diversos efectos al modelo, como iluminación pre-calculada o simulación de una textura mediante color por vértice, ahorrando en memoria de video. Por otro lado se ha implementado un sistema de renderizado multi-capa, que permite realizar varias pasadas de render, pudiendo, de esta forma, aplicar al modelo una segunda textura mezclada con la principal o realizar un efecto de reflexión esférica. Uno de los principales avances de esta herramienta con respecto a otras existentes se encuentra en el apartado de animación. El renderizador desarrollado permite por un lado animación por transformación, consistente en la animación de mallas o grupos de vértices del modelo mediante el movimiento de una articulación asociada que determina su posición y rotación en cada frame de animación. Por otro lado se ha implementado un sistema de animación por muestreo de vértices mediante el cual se determina la posición de éstos en cada instante de la animación, generando frame a frame las poses que componen el movimiento (siendo este último método necesario cuando no se puede animar una malla por transformación). Un mismo modelo puede contener diferentes esqueletos, animados independientemente entre sí, y cada uno de ellos tener definidas varias costumbres de animación que correspondan a movimientos contextuales diferentes (andar, correr, saltar, etc). Además, el sistema permite extraer cualquier articulación para asociar su transformación a un objeto estático externo y que éste siga el movimiento de la animación, pudiendo así, por ejemplo, equipar un objeto en la mano de un personaje. Finalmente se han implementado varios efectos útiles en la creación de escenas tridimensionales, como el billboarding (tanto esférico como cilíndrico), que restringe la rotación de un modelo para que éste siempre mire a cámara y así poder emular la apariencia de un objeto tridimensional mediante una imagen plana, ahorrando geometría, o emplearlo para realizar efectos de partículas. Por otra parte se ha implementado un sistema de animación de texturas por subimágenes que permite generar efectos de movimiento mediante imágenes, sin necesidad de transformar geometría. ABSTRACT. The Nintendo DS portable console has received great interest within the independent developers’ community, with a huge homebrew scene. The 2D capabilities of this console are well known and used since most efforts of the amateur creators has been focused on this point. However its 3D engine (which handles with the representation of three-dimensional models) is not equally used. Therefore, in this project the main objective is to assess the Nintendo DS graphic capabilities. For this purpose, a library of functions in C programming language has been coded. This library allows the programmer to take advantage of the possibilities that the 3D area brings. This way the library can be used by the homebrew community as a tool to create 3D applications in an easy way, since it has been designed as a modular and accessible system. Regarding the render process, some conclusions have been drawn. First, it is possible to assign several colour components to the same vertex (material colour, reactive to the illumination, colour per vertex and texture colour), independently and simultaneously. This feature can be useful to apply certain effects on the model, such as pre-calculated illumination or the simulation of a texture using colour per vertex, providing video memory saving. Moreover, a multi-layer render system has been implemented. This system allows the programmer to issue several render passes on the same model. This new feature brings the possibility to apply to the model a second texture blended with the main one or simulate a spherical reflection effect. One of the main advances of this tool over existing ones consists of its animation system. The developed renderer includes, on the one hand, transform animation, which consists on animating a mesh or groups of vertices of the model by the movement of an associated joint. This joint determines position and rotation of the mesh at each frame of the animation. On the other hand, this tool also implements an animation system by vertex sampling, where the position of vertices is determined at every instant of the animation, generating the poses that build up the movement (the latter method is mandatory when a mesh cannot be animated by transform). A model can contain multiple skeletons, animated independently, each of them being defined with several animation customs, corresponding to different contextual movements (walk, run, jump, etc). Besides, the system allows extraction of information from any joint in order to associate its transform to a static external object, which will follow the movement of the animation. This way, any object could be equipped, for example, on the hand of a character. Finally, some useful effects for the creation of three-dimensional scenes have been implemented. These effects include billboarding (both spherical and cylindrical), which constraints the rotation of a model so it always looks on the camera's direction. This feature can provide the ability to emulate the appearance of a three-dimensional model through a flat image (saving geometry). It can also be helpful in the implementation of particle effects. Moreover, a texture animation system using sub-images has also been implemented. This system allows the generation of movement by using images as textures, without having to transform geometry.

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process [1]. The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to "Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management" [2].

3D Videoconferencing system using spatial scalability

An implementation of a real-time 3D videoconferencing system using the currently available technology is presented. This appr oach is based on the side by side spatial compression of the stereoscopic images . The encoder and the decoder have b een implemented in a standard personal computer and a conventional 3D comp atible TV has been used to present the frames. Moreover, the users without 3D technology can use the system because 2D compatibility mode has been implemented in the decoder. The performance res ults show that a conventional computer can be used for encod ing/decoding audio and video streams and the delay in the transmission is lower than 200 ms.

Fast human pose estimation using 3D Zernike descriptors

Markerless video-based human pose estimation algorithms face a high-dimensional problem that is frequently broken down into several lower-dimensional ones by estimating the pose of each limb separately. However, in order to do so they need to reliably locate the torso, for which they typically rely on time coherence and tracking algorithms. Their losing track usually results in catastrophic failure of the process, requiring human intervention and thus precluding their usage in real-time applications. We propose a very fast rough pose estimation scheme based on global shape descriptors built on 3D Zernike moments. Using an articulated model that we configure in many poses, a large database of descriptor/pose pairs can be computed off-line. Thus, the only steps that must be done on-line are the extraction of the descriptors for each input volume and a search against the database to get the most likely poses. While the result of such process is not a fine pose estimation, it can be useful to help more sophisticated algorithms to regain track or make more educated guesses when creating new particles in particle-filter-based tracking schemes. We have achieved a performance of about ten fps on a single computer using a database of about one million entries.

Refined facial disparity maps for automatic creation of 3D avatars

We propose a new method to automatically refine a facial disparity map obtained with standard cameras and under conventional illumination conditions by using a smart combination of traditional computer vision and 3D graphics techniques. Our system inputs two stereo images acquired with standard (calibrated) cameras and uses dense disparity estimation strategies to obtain a coarse initial disparity map, and SIFT to detect and match several feature points in the subjects face. We then use these points as anchors to modify the disparity in the facial area by building a Delaunay triangulation of their convex hull and interpolating their disparity values inside each triangle. We thus obtain a refined disparity map providing a much more accurate representation of the the subjects facial features. This refined facial disparity map may be easily transformed, through the camera calibration parameters, into a depth map to be used, also automatically, to improve the facial mesh of a 3D avatar to match the subjects real human features.

Representación 3D de petroglifos: propuesta de metodología de modelización de los grabados del Valle de Tamanart, Marruecos.

La modelización tridimensional se ha ido implementando como una de las mejores formas de documentación del patrimonio histórico. En concreto, en lo que se refiere a la documentación de petroglifos resulta especialmente interesante en su estudio y difusión. Actualmente, existen diversos métodos de obtener estos modelos 3D, que implican diferentes tipos de instrumental, como escáneres láser o cámaras fotográficas, material informático y software. En este Trabajo Fin de Máster se pretende obtener una visión general de estos métodos,así como proponer una metodología basada en la fotogrametría de objeto cercano, para las necesidades de un proyecto concreto: el proyecto Tamanart en Marruecos. Para ello se realizan dos pruebas; una de laboratorio y otra en el Museo Arqueológico Nacional, para comprobar la viabilidad de esta metodología y sus futuras aplicaciones. ABSTRACT: 3D modeling has been implemented in the last years as one of the best ways to document historical and cultural heritage. In particular, referring to petroglyph documentation it is specially interesting to its study and dissemination. Nowadays, there are several methods to obtain this 3D models that implies different kinds of instruments, like laser-scanners or photographic cameras and computer hardware and software. In the present Master’s Dissertation it is intended to obtain a general vision of this methods,as well as propose a methodology using closed range photogrammetry, based in the needs of a specific project: Tamanart Project, in Morocco. For this purpose two tests are made, one of them in laboratory and the other in the Museo Arqueológico Nacional, to check the feasibility of this methodology and their future applications.

Tutorial 2.0 on Technical Drawing 3D and Visualization

In recent years, the continuous incorporation of new technologies in the learning process has been an important factor in the educational process (1). The Technical University of Madrid (UPM) promotes educational innovation processes and develops projects related to the improvement of the education quality. The experience that we present fits into the Educational Innovation Project (EIP) of the E.U. of Agricultural Engineering of Madrid. One of the main objectives of the EIP is to Take advantage of the new opportunities offered by the Learning and Knowledge Technologies in order to enrich the educational processes and teaching management (2).