Contribution to Load-Frequency Regulation of a Hydropower Plant with Long Tail-Race Tunnel

In this paper, a hydroelectric power plant with long tail-race tunnel has been modelled for assessing its contribution to secondary regulation reserve. Cavitation problems, caused by the discharge conduit length, are expected downstream the turbine where low pressure appears during regulation manoeuvres. Therefore, governor's gains should be selected taking into account these phenomena. On the other hand, regulation services bidden by the plant operator should fulfil TSO (Transmission System Operator) quality requirements. A methodology for tuning governor PI gains is proposed and applied to a Hydro power plant in pre-design phase in northwest area of Spain. The PI gains adjustment proposed provides a proper plant response, according to some established indexes, while avoiding cavitation phenomena.

Tridimensional simulation of the speed, pressure and turbulence fields of the air flow on the geometry of a freight truck inside a wind tunnel

This study shows the air flow behavior through the geometry of a freight truck inside a AF6109 wind tunnel with the purpose to predict the speed, pressure and turbulence fields made by the air flow, to decrease the aerodynamic resistance, to calculate the dragging coefficient, to evaluate the aerodynamics of the geometry of the prototype using the CFD technique and to compare the results of the simulation with the results obtained experimentally with the “PETER 739 HAULER” scaled freight truck model located on the floor of the test chamber. The Geometry went through a numerical simulation process using the CFX 5,7. The obtained results showed the behavior of the air flow through the test chamber, and also it showed the variations of speed and pressure at the exit of the chamber and the calculations of the coefficient and the dragging force on the geometry of the freight truck. The evaluation of the aerodynamics showed that the aerodynamic deflector is a device that helped the reduction the dragging produced in a significant way by the air. Furthermore, the dragging coefficient and force on the prototype freight truck could be estimated establishing an incomplete similarity.

Frequency control support of a wind-solar isolated system by a hydropower plant with long tail-race tunnel

Pumped storage hydro plants (PSHP) can provide adequate energy storage and frequency regulation capacities in isolated power systems having significant renewable energy resources. Due to its high wind and solar potential, several plans have been developed for La Palma Island in the Canary archipelago, aimed at increasing the penetration of these energy sources. In this paper, the performance of the frequency control of La Palma power system is assessed, when the demand is supplied by the available wind and solar generation with the support of a PSHP which has been predesigned for this purpose. The frequency regulation is provided exclusively by the PSHP. Due to topographic and environmental constraints, this plant has a long tail-race tunnel without a surge tank. In this configuration, the effects of pressure waves cannot be neglected and, therefore, usual recommendations for PID governor tuning provide poor performance. A PI governor tuning criterion is proposed for the hydro plant and compared with other criteria according to several performance indices. Several scenarios considering solar and wind energy penetration have been simulated to check the plant response using the proposed criterion. This tuning of the PI governor maintains La Palma system frequency within grid code requirements.

Gust wind tunnel study on ballast pick-up by high-speed trains

This paper describes the experimental setup, procedure, and results obtained, concerning the dynamics of a body lying on a floor, attached to a hinge, and exposed to an unsteady flow, which is a model of the initiation of rotational motion of ballast stones due to the wind generated by the passing of a high-speed train. The idea is to obtain experimental data to support the theoretical model developed in Sanz-Andres and Navarro-Medina (J Wind Eng Ind Aerodyn 98, 772–783, (2010), aimed at analyzing the initial phase of the ballast train-induced-wind erosion (BATIWE) phenomenon. The experimental setup is based on an open circuit, closed test section, low-speed wind tunnel, with a new sinusoidal gust generator mechanism concept, designed and built at the IDR/UPM. The tunnel’s main characteristic is the ability to generate a flow with a uniform velocity profile and sinusoidal time fluctuation of the speed. Experimental results and theoretical model predictions are in good agreement.

Road to 1966 : caminos hacia "complejidad y contradicción en la arquitectura", en la cultura arquitectónica de la segunda posguerra en EE.UU

Complejidad y contradicción en la arquitectura ha resultado ser una de las referencias capitales más aludidas, citadas y reproducidas de la literatura arquitectónica de los tiempos recientes. No en vano, en la introducción de la propia obra, Vincent Scully afirmó que «probablemente es el texto más importante sobre arquitectura desde ‘Vers une Architecture’, escrito por Le Corbusier en 1923». Sin embargo, sus fuentes parece que están inexploradas o, al menos, no examinadas. Por ello, Road to 1966 se plantea como un trabajo de investigación con tres objetivos de partida fundamentales: (1) el interés en estudiar el debate arquitectónico candente, creado con las fricciones surgidas entre los protagonistas de unos años que cambiaron el estado de lo que se consideraba una obra legítima en arquitectura; (2) se pretende ampliar la cronología del desarrollo intelectual de un texto, el de Venturi, que marcó la segunda mitad del siglo xx, de manera retroactiva hasta los años de la II Guerra Mundial, cuando parece que empezaban a ser coherentes y reconocibles unas nuevas posiciones desde las que aproximarse a las cuestiones de la práctica, la teoría y la historia de la arquitectura; (3) poder ofrecer una nueva interpretación de dicho texto de Venturi, entendido no como el origen primigenio de parte de las grandes transformaciones de la arquitectura reciente (de los últimos cincuenta años), sino como el resultado necesario de esa cronología intelectual previa. La arquitectura norteamericana de estos años de posguerra ha resultado ser crucial en su posterior desarrollo, y, especialmente, en relación al libro de Venturi. De hecho, Scully en la introducción de la edición original de Complejidad y contradicción, señalaba que «el principal argumento del libro está expuesto a finales de los cincuenta». Que la arquitectura del siglo xx tiene en la Norteamérica de los años sesenta -cuando se consolida la figura de Venturi- uno de sus capítulos más decisivos, frecuentemente asumido como el paso siguiente a la importada modernidad heroica europea, hoy parece no ser discutido por casi nadie. Ahora bien: ¿qué ocurre con los años intermedios? ¿Qué acontece entre el final de la II Guerra Mundial y esos años sesenta? La posible carencia de una postura dominante y clara quizás haya sumido esta etapa en un cierto olvido o descuido por parte de historiadores y críticos. Así, este trabajo se estructura alrededor del papel que ocupa el texto venturiano, sin ser éste su único protagonista. Tomado más bien como excusa, la tesis va profundizando de manera deductiva en el conjunto de circunstancias que pudieron llevar a su autor hacia las conclusiones que desarrolló, detectando los ambientes biográficos y formativos, pensamientos compartidos e influencias epistemológicas y profesionales mutuas, que justificarían una novedosa interpretación de dicho texto como el corolario necesario de un panorama de crisis y cambios - éste sí protagonista en este trabajo-, al contrario de cómo habitualmente se ha venido entendiendo dicha obra. La investigación se centra predominantemente en el rastreo de las fuentes citadas por el propio Venturi en su libro, así como de los textos de mayor difusión (generalmente revistas profesionales no exclusivamente académicas, además de libros, catálogos de exposiciones, actas de simposios…), y no tanto en las obras construidas o proyectadas; sí, quizás, en los términos en los que dichas obras fueron publicadas, comentadas o reseñadas. Así, se ha adoptado una aproximación concebida sub specie bibliotecae, donde se han aplicado unos métodos de trabajo caracterizados por su componente cronológica, y, después, analítico-comparativa: dicho de otro modo, un método historiográfico-periodístico capaz de relacionar las historias o cursos de ciertas ideas o nociones, dentro de un contexto general más amplio en sus derivadas arquitectónicas, estéticas, socio-generacionales, culturales, filosóficas, científicas, políticas, literarias… Con ello, se pretende establecer una relectura del primer libro de Venturi y sus años de gestación desde unas nuevas concepciones, más modernas que postmodern(ist)as, proponiendo una posible evolución en la arquitectura más reciente cuyas raíces, a fin de cuentas, tendrían su origen en la Norteamérica de 1946 a 1966. ABSTRACT Complexity and Contradiction in Architecture has proved to be one of the capital, alluded references cited and reproduced in the architectural literature of the recent times. Not surprisingly, in the Introduction to the book, Vincent Scully wrote that "yet it is probably the most important writing on the making of architecture since Le Corbusier´s ‘Vers une Architecture’, of 1923". However, its sources seem to be unexplored or at least not examined. Therefore, Road to 1966 is presented as a research with three fundamental starting objectives: (1) first, the interest in studying the burning architectural debate, created within the arising frictions among the protagonists of the years that changed the status of what was considered a legitimate work in architecture; (2) second, it seeks to extend the chronology of the intellectual background of the book written by Venturi, which marked the second half of the twentieth century, in a retroactive manner to the years of the World War II, when it seems that some new positions from which to approach the issues of practice, theory and history of architecture began to be consistent and recognizable; (3) lastly, to offer a new interpretation of Venturi’s text, now understood not as the primal source of the great transformations of the recent architecture (of the last fifty years), but as the necessary result of that background intellectual chronology. The American architecture of these post-war years has proved to be crucial in its later stages, and especially in relation to the book of Robert Venturi. In fact, Scully in the Introduction to the first edition of Complexity and Contradiction, noted that "the major argument of this book was laid out in the late fifties". The fact that the architecture of the twentieth century –when the leading figure of Venturi was consolidated- has in the North America of the sixties one of its most decisive chapters, (often assumed as the next step to the imported European heroic modernism) today seems to be discussed by almost anyone. Now, what about the intervening years? What happens between the end of the World War II and the sixties? The potential lack of a clear dominant position of this stage may have plunged it into oblivion or oversight by historians and critics. Thus, this research is structured around the role that occupies Venturi’s work, whereas this is not its only subject. Rather taken as an excuse, the thesis deepens deductively in the set of circumstances that could lead its author to the conclusions he developed in 1966, detecting biographical and academic environments, shared thoughts and epistemological and mutual professional influences, that would justify a new interpretation of this book as a necessary corollary of an outlook of crisis and change (this major and center subject in this dissertation), contrary to what has been commonly understood upon this work. The research focuses predominantly on tracing the sources cited by Venturi himself in his book, as well as other texts of wider dissemination and outreach (usually professional journals not exclusively academic, as well as books, catalogs of exhibitions, symposia proceedings...), and not so much in the buildings or unbuilt projects; but also, perhaps, it is focused in the terms in which these works were published, commented or reviewed. Hence an approach conceived sub specie bibliotecae has been adopted, with working methods characterized by their chronological component, and then the analytical-comparative one: in other words, a historiographicaljournalistic method able to relate stories or courses of certain ideas or notions, within a broader general context in its architectural, aesthetic, sociological-generational, cultural, philosophical, scientific, political, literary... sides. This approach intends to establish a re-reading of Venturi’s first book and its years of gestation, from some new understandings, more modern than postmodern(ist), proposing a possible evolution of the latest architecture whose roots, after all, would have their origin in the North America of 1946-1966.

Understanding how to reduce road transport emissions : modelling the impact of eco-driving

Entre los problemas medioambientales más trascendentales para la sociedad, se encuentra el del cambio climático así como el de la calidad del aire en nuestras áreas metropolitanas. El transporte por carretera es uno de los principales causantes, y como tal, las administraciones públicas se enfrentan a estos problemas desde varios ángulos: Cambios a modos de transporte más limpios, nuevas tecnologías y combustibles en los vehículos, gestión de la demanda y el uso de tecnologías de la información y la comunicación (ICT) aplicadas al transporte. En esta tesis doctoral se plantea como primer objetivo el profundizar en la comprensión de cómo ciertas medidas ICT afectan al tráfico, las emisiones y la propia dinámica de los vehículos. El estudio se basa en una campaña de recogida de datos con vehículos flotantes para evaluar los impactos de cuatro medidas concretas: Control de velocidad por tramo, límites variables de velocidad, limitador de velocidad (control de crucero) y conducción eficiente (eco‐driving). Como segundo objetivo, el estudio se centra en la conducción eficiente, ya que es una de las medidas que más ahorros de combustible presenta a nivel individual. Aunque estas reducciones están suficientemente documentadas en la literatura, muy pocos estudios se centran en estudiar el efecto que los conductores eficientes pueden tener en el flujo de tráfico, y cuál sería el impacto si se fuera aumentando el porcentaje de este tipo de conductores. A través de una herramienta de microsimulación de tráfico, se han construido cuatro modelos de vías urbanas que se corresponden con una autopista urbana, una arteria, un colector y una vía local. Gracias a los datos recogidos en la campaña de vehículos flotantes, se ha calibrado el modelo, tanto el escenario base como el ajuste de parámetros de conducción para simular la conducción eficiente. En total se han simulado 72 escenarios, variando el tipo de vía, la demanda de tráfico y el porcentaje de conductores eficientes. A continuación se han calculado las emisiones de CO2 and NOx mediante un modelo de emisiones a nivel microscópico. Los resultados muestran que en escenarios con alto porcentaje de conductores eficientes y altas demandas de tráfico las emisiones aumentan. Esto se debe a que las mayores distancias de seguridad y las aceleraciones y frenadas suaves hacen que aumente la congestión, produciendo así mayores emisiones a nivel global. Climate change and the reduced air quality in our metropolitan areas are two of the main environmental problems that the society is addressing currently. Being road transportation one of the main contributors, public administrations are facing these problems from different points of view: shift to cleaner modes, new fuels and vehicle technologies, demand management and the use of information and communication technologies (ICT) applied to transportation. The first objective of this thesis is to understand how certain ICT measures affect traffic, emissions and vehicle dynamics. The study is based on a data collection campaign with floating vehicles to evaluate the impact of four specific measures: section speed control, variable speed limits, cruise control and eco‐driving. The second objective of the study focuses on eco‐driving, as it is one of the measures that present the largest fuel savings at an individual level. Although these savings are well documented in the literature, few studies focus on how ecodrivers affect the surrounding vehicles and the traffic, and what would be the impact in case of different eco‐drivers percentage. Using a traffic micro‐simulation tool, four models in urban context have been built, corresponding to urban motorway, urban arterial, urban collector and a local street. Both the base‐case and the parameters setting to simulate eco‐driving have been calibrated with the data collected through floating vehicles. In total 72 scenarios were simulated, varying the type of road, traffic demand and the percentage of eco‐drivers. Then, the CO2 and NOx emissions have been estimated through the use of an emission model at microscopic level. The results show that in scenarios with high percentage of co‐drivers and high traffic demand the emissions rise. Higher headways and smooth acceleration and decelerations increase congestion, producing higher emissions globally.

Implementation of road dust resuspension in air quality simulations of particulate matter in Madrid (Spain)

An evaluation of the concentration levels of Particulate Matter (PM) was carried out in Madrid (Spain) by introducing the emissions from road dust resuspension. Road dust resuspension emission factors (EF) for different types of vehicles were calculated from EPA-AP42, a global resuspension factor of 0.097 g veh−1km−1 as described in Amato et al. (2010) and a rain-dependent correction factor. With these resuspension EFs, a simulation at street canyon level was performed with the OSPM model without rainfall. Subsequently, a simulation using the CMAQ model was implemented adding resuspension emissions affected by the rain. These data were compared with monitored data obtained from air quality stations. OSPM model simulations with resuspension EFs but without the effect of rainfall improve the PM estimates in about 20gm−3μ compared to the simulation with default EFs. Total emissions were calculated by adding the emissions estimated with resuspension EFs to the default PM emissions to be used by CMAQ. For the study in the Madrid Area, resuspension emissions are approximately of the same order of magnitude as inventoried emissions. On a monthly scale, rain effects are negligible for resuspension emissions due to the dry weather conditions of Spain. With the exception of April and May, the decrease in resuspension emissions is not >3%. The predicted PM10 concentration increases up to 9μ gm−3 on annual average for each station compared to the same scenario without resuspension. However, in both cases, PM 10 estimates with resuspension are still underestimating observations. It should be noted that although that accounting for resuspension improves the quality of model predictions, other PM sources (e.g., Saharan dust) were not considered in this study.

Analysis of the behavior of multijunction solar cells under high irradiance Gaussian light profiles showing chromatic aberration with emphasis on tunnel junction performance

In this work, we explain the behavior of multijunction solar cells under non-uniform (spatially and in spectral content) light profiles in general and in particular when Gaussian light profiles cause a photo-generated current density, which exceeds locally the peak current density of the tunnel junction. We have analyzed the implications on the tunnel junction's limitation, that is, in the loss of efficiency due to the appearance of a dip in the I–V curve. For that, we have carried out simulations with our three-dimensional distributed model for multijunction solar cells, which contemplates a full description of the tunnel junction and also takes into account the lateral resistances in the tunnel junction. The main findings are that the current density photo-generated spreads out through the lateral resistances of the device, mainly through the tunnel junction layers and the back contact. Therefore, under non-uniform light profiles these resistances are determinant not only to avoid the tunnel junction's limitation but also for mitigating losses in the fill factor. Therefore, taking into account these lateral resistances could be the key for jointly optimizing the concentrator photovoltaic system (concentrator optics, front grid layout and semiconductor structure)