El fitness como factor determinante en el riesgo de discapacidad, su relación con la composición corporal y el estado cognitivo en población mayor institucionalizada y de vida independiente = Fitness as a determinant factor in the risk of disability, and its relationship to body composition and cognitive status in institutionalized elderly population and independent living

La condición física, o como mejor se la conoce hoy en día el “fitness”, es una variable que está cobrando gran protagonismo, especialmente desde la perspectiva de la salud. La mejora de la calidad de vida que se ha experimentado en los últimos años en las sociedades desarrolladas, conlleva un aumento de la esperanza de vida, lo que hace que cada vez más personas vivan más años. Este rápido crecimiento de la población mayor de 60 años hace que, un grupo poblacional prácticamente olvidado desde el punto de vista de la investigación científica en el campo de la actividad física y del deporte, cobre gran relevancia, con el fin de poder ayudar a alcanzar el dicho “no se trata de aportar años a la vida sino vida a lo años”. La presente memoria de Tesis Doctoral tiene como principal objetivo valorar los niveles de fitness en población mayor española, además de analizar la relación existente entre el fitness, sus condicionantes y otros aspectos de la salud, tales como la composición corporal y el estado cognitivo. Entendemos que para poder establecer futuras políticas de salud pública en relación a la actividad física y el envejecimiento activo es necesario conocer cuáles son los niveles de partida de la población mayor en España y sus condicionantes. El trabajo está basado en los datos del estudio multicéntrico EXERNET (Estudio Multi-céntrico para la Evaluación de los Niveles de Condición Física y su relación con Estilos de Vida Saludables en población mayor española no institucionalizada), así como en los datos de dos estudios, llevados a cabo en población mayor institucionalizada. Se han analizado un total de 3136 mayores de vida independiente, procedentes de 6 comunidades autónomas, y 153 mayores institucionalizados en residencias de la Comunidad de Madrid. Los principales resultados de esta tesis son los siguientes: a) Fueron establecidos los valores de referencia, así como las curvas de percentiles, para cada uno de los test de fitness, de acuerdo a la edad y al sexo, en población mayor española de vida independiente y no institucionalizada. b) Los varones obtuvieron mejores niveles de fitness que las mujeres, excepto en los test de flexibilidad; existe una tendencia a disminuir la condición física en ambos sexos a medida que la edad aumenta. c) Niveles bajos de fitness funcional fueron asociados con un aumento en la percepción de problemas. d) El nivel mínimo de fitness funcional a partir del cual los mayores perciben problemas en sus actividades de la vida diaria (AVD) es similar en ambos sexos. e) Niveles elevados de fitness fueron asociados con un menor riesgo de sufrir obesidad sarcopénica y con una mejor salud percibida en los mayores. f) Las personas mayores con obesidad sarcopénica tienen menor capacidad funcional que las personas mayores sanas. g) Niveles elevados de fuerza fueron asociados con un mejor estado cognitivo siendo el estado cognitivo la variable que más influye en el deterioro de la fuerza, incluso más que el sexo y la edad. ABSTRACT Fitness is a variable that is gaining in prominence, especially from the health perspective. Improvement of life quality that has been experienced in the last few years in developed countries, leads to an expanded life expectancy, increasing the numbers of people living longer. This population consisting of people of over 60 years, an almost forgotten population group from the point of view of scientific research in the field of physical activity and sport, is becoming increasingly important, with the main aim of helping to achieve the saying “do not only add years to life, but also add life to years”. The principal aim of the current thesis was to assess physical fitness levels in Spanish elderly people, of over 65 years, analyzing relationship between physical fitness, its determinants, and other aspects of health such as body composition and cognitive status. In order to establish further public health policies in relation to physical activity and active ageing it is necessary to identify the starting physical fitness levels of the Spanish population and their determinants. The work is based on data from the EXERNET multi-center study ("Multi-center Study for the Evaluation of Fitness levels and their relationship to Healthy Lifestyles in noninstitutionalized Spanish elderly"), and on data from two studies conducted in institutionalized elderly people: a total of 3136 non-institutionalized elderly, from 6 Regions of Spain, and 153 institutionalized elderly in nursing homes of Madrid. The main outcomes of this thesis are: a) sex- and age-specific physical fitness normative values and percentile curves for independent and non-institutionalized Spanish elderly were established. b) Greater physical fitness was present in the elderly men than in women, except for the flexibility test, and a trend toward decreased physical fitness in both sexes as their age increased. c) Lower levels of functional fitness were associated with increased perceived problems. d) The minimum functional fitness level at which older adults perceive problems in their ADLs, is similar for both sexes e) Higher levels of physical fitness were associated with a reduced risk of suffering sarcopenic obesity and better perceived health among the elderly. f) The elderly with sarcopenic obesity have lower physical functioning than healthy counterparts. g) Higher strength values were associated with better cognitive status with cognitive status being the most influencing variable in strength deterioration even more than sex and age.

Generating Adaptive Presentations of Hydrologic Behavior

This paper describes a knowledge-based approach for summarizing and presenting the behavior of hydrologic networks. This approach has been designed for visualizing data from sensors and simulations in the context of emergencies caused by floods. It follows a solution for event summarization that exploits physical properties of the dynamic system to automatically generate summaries of relevant data. The summarized information is presented using different modes such as text, 2D graphics and 3D animations on virtual terrains. The presentation is automatically generated using a hierarchical planner with abstract presentation fragments corresponding to discourse patterns, taking into account the characteristics of the user who receives the information and constraints imposed by the communication devices (mobile phone, computer, fax, etc.). An application following this approach has been developed for a national hydrologic information infrastructure of Spain.

Impact of introducing longer and heavier vehicles on regional consumer price index and Spanish road freight transport system

This paper applies an integrated modeling approach to the case of Spain; the approach is based on a random utility-based multiregional input-output model and a road transport network model for assessing the effect of introducing longer and heavier vehicles (LHVs) on the regional consumer price index (CPI) and on the transportation system. The approach strongly supports the concept that changes in transport costs derived from the LHV allowance as well as the economic structure of regions have direct and indirect effects on the economy and on the transportation system. Results show that the introduction of LHVs might reduce prices paid by consumers for a representative basket of goods and services in the regions of Spain and would also lead to a reduction in the regional CPI. In addition, the magnitude and extent of changes in the transportation system are estimated by using the commodity-based structure of the approach to identify the effect of traffic changes on traffic flows and on pollutant emissions over the whole network.

Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

An Overview of Geodetic Volcano Research in the Canary Islands

The Canary Islands are mostly characterized by diffuse and scattered volcanism affecting a large area, with only one active stratovolcano, the Teide?Pico Viejo complex (Tenerife). More than 2 million people live and work in the 7,447 km2 of the archipelago, resulting in an average population density three times greater than the rest of Spain. This fact, together with the growth of exposure during the past 40 years, increases volcanic risk with respect previous eruptions, as witnessed during the recent 2011?2012 El Hierro submarine eruption. Therefore, in addition to purely scientific reasons there are economic and population-security reasons for developing and maintaining an efficient volcano monitoring system. In this scenario geodetic monitoring represents an important part of the monitoring system. We describe volcano geodetic monitoring research carried out in the Canary Islands and the results obtained. We consider for each epoch the two main existing constraints: the level of volcanic activity in the archipelago, and the limitations of the techniques available at the time. Theoretical and observational aspects are considered, as well as the implications for operational volcano surveillance. Current challenges of and future perspectives in geodetic volcano monitoring in the Canaries are also presented.

Characterization of Underground Cellars in the Duero Basin by GNSS, LIDAR and GPR Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor.

Stabilization of embankments on inclined surfaces by micropiles

Embankments constructed on hillsides can have serious problems of stability, generally created by the action of water com-bined with the inclination of the hillside. In order to increase the stability or correct problems of instability already present, there are various methods that can be used: surface and deep drainage, reinforcements with anchored beams, medium and large diameter piles, etc. Standing out among these systems (for its versatility) is the use of micropiles which ?sew? the embankment to a non-unstable area of the hillside. This paper presents research undertaken by means of a finite element code for studying the effect and stress of the micropiles, comparing the results with real measurements taken in the south of Spain.

Relationship among slurry characteristics and gaseous emissions at different types of commercial Spanish pig farms

This study aimed to analyse several factors of variation of slurry composition and to establish prediction equations for potential methane (CH4) and ammonia (NH3) emissions. Seventy-nine feed and slurry samples were collected at two seasons (summer and winter) from commercial pig farms sited at two Spanish regions (Centre and Mediterranean). Nursery, growing-fattening, gestating and lactating facilities were sampled. Feed and slurry composition were determined, and potential CH4 and NH3 emissions measured at laboratory. Feed nutrient contents were used as covariates in the analysis. Near infrared reflectance spectroscopy (NIRS) was evaluated as a predicting tool for slurry composition and potential gaseous emissions. A wide variability was found both in feed and slurry composition. Mediterranean farms had a higher pH (p<0.001) and ash (p=0.02) concentration than those located at the Centre of Spain. Also, type of farm affected ether extract content of the slurry (p=0.02), with highest values obtained for the youngest animal facilities. Results suggested a buffer effect of dietary fibre on slurry pH and a direct relationship (p<0.05) with fibre constituents of manure. Dietary protein content did not affect slurry nitrogen content but decreased (p=0.003) total and volatile solids concentration. Prediction models of potential NH3 emissions (R2=0.89) and CH4 yield (R2=0.61) were obtained from slurry composition. Predictions from NIRS showed a high accuracy for most slurry constituents (R2>0.90) and similar accuracy of prediction of potential NH3 and CH4 emissions (R2=0.84 and 0.68, respectively) to models using slurry characteristics, which can be of interest to estimate emissions from commercial farms and establish mitigation strategies or optimize biogas production.

Contribution to Load-Frequency Regulation of a Hydropower Plant with Long Tail-Race Tunnel

In this paper, a hydroelectric power plant with long tail-race tunnel has been modelled for assessing its contribution to secondary regulation reserve. Cavitation problems, caused by the discharge conduit length, are expected downstream the turbine where low pressure appears during regulation manoeuvres. Therefore, governor's gains should be selected taking into account these phenomena. On the other hand, regulation services bidden by the plant operator should fulfil TSO (Transmission System Operator) quality requirements. A methodology for tuning governor PI gains is proposed and applied to a Hydro power plant in pre-design phase in northwest area of Spain. The PI gains adjustment proposed provides a proper plant response, according to some established indexes, while avoiding cavitation phenomena.

Combine use of Selected Schizosaccharomyces pombe and Lachancea thermotolerans Yeast Strains as an Alternative to the Traditional Malolactic Fermentation in Red Wine Production

Most red wines commercialized in the market use the malolactic fermentationprocess in order to ensure stability from a microbiological point of view. In this secondfermentation, malic acid is converted into L-lactic acid under controlled setups. Howeverthis process is not free from possible collateral effects that on some occasions produceoff-flavors, wine quality loss and human health problems. In warm viticulture regions suchas the south of Spain, the risk of suffering a deviation during the malolactic fermentationprocess increases due to the high must pH. This contributes to produce wines with highvolatile acidity and biogenic amine values. This manuscript develops a new red winemakingmethodology that consists of combining the use of two non-Saccharomyces yeast strains asan alternative to the traditional malolactic fermentation. In this method, malic acid is totallyconsumed by Schizosaccharomyces pombe, thus achieving the microbiological stabilizationobjective, while Lachancea thermotolerans produces lactic acid in order not to reduce andeven increase the acidity of wines produced from low acidity musts. This technique reducesthe risks inherent to the malolactic fermentation process when performed in warm regions.The result is more fruity wines that contain less acetic acid and biogenic amines than thetraditional controls that have undergone the classical malolactic fermentation.

Launching the Vicario Viaduct: Andalucia, Spain

The Vicario Viaduct is located in the A-44 motorway, in the South-East part of Spain. It crosses a natural gorge, near the town of Ízbor in the province of Granada. A single continuous steel concrete composite deck, 24 m wide and 175 m long, divided in two 87,5 m spans, has been built. The cross section is a single structural steel box, 8,00 m wide and 4,52 m deep. The total width of 24 m is reached adding a strut and tie system each 4,375 m on both sides of the box. The steel parts of the deck were entirely constructed in the workshop and then they were erected on site just behind one of the abutments. Finally a 27.5 m long steel nose was connected to launch the deck. The main problems have been the curved shape of the deck (1420 m radius in plan) producing a non symmetric transverse distribution of reactions on each support and the cantilever reaching 87,5 m long, producing a maximum deflection of 1500 mm

La Península Ibérica en el transporte masivo de mercancías entre Europa y África : futuras autopistas del mar

La competitividad del transporte de mercancías depende del estado y funcionamiento de las redes existentes y de sus infraestructuras, no del modo de transporte. En concreto, la rentabilidad o la reducción de los costes de producción del transporte marítimo se vería incrementado con el uso de buques de mayor capacidad y con el desarrollo de plataformas portuarias de distribución o puertos secos, ya que el 90% del comercio entre la Unión Europea y terceros países se realiza a través de sus puertos a un promedio de 3,2 billones de toneladas de mercancías manipuladas cada año y el 40% del tráfico intraeuropeo utiliza el transporte marítimo de corta distancia. A pesar de que los puertos europeos acogen anualmente a más de 400 millones de pasajeros, los grandes desarrollos se han producido en los puertos del norte de Europa (Róterdam, Amberes, Ámsterdam). Los países del Sur de Europa deben buscar nuevas fórmulas para ser más competitivos, ya sea mediante creación de nuevas infraestructuras o mediante refuerzo de las existentes, ofreciendo los costes de los puertos del Norte. El fomento del transporte marítimo y fluvial como alternativa al transporte por carretera, especialmente el transporte marítimo de corta distancia, ha sido impulsado por la Comisión Europea (CE) desde 2003 a través de programas de apoyo comunitario de aplicación directa a las Autopistas del Mar, a modo de ejemplo, cabría citar los programas Marco Polo I y II, los cuales contaron con una dotación presupuestaria total de 855 millones de euros para el período 2003 – 2013; en ese período de tiempo se establecieron objetivos de reducción de congestión vial y mejora del comportamiento medio ambiental del sistema de transporte de mercancías dentro de la comunidad y la potenciación de la intermodalidad. El concepto de Autopista del Mar surge en el Libro Blanco de Transportes de la Comisión Europea “La política europea de transportes de cara al 2010: La hora de la verdad” del 12 de diciembre de 2001, en el marco de una política europea para fomento y desarrollo de sistemas de transportes sostenibles. Las Autopistas del Mar consisten en rutas marítimas de corta distancia entre dos puntos, de menor distancia que por vía terrestre, en las que a través del transporte intermodal mejoran significativamente los tiempos y costes de la cadena logística, contribuyen a la reducción de accidentes, ruidos y emisiones de CO2 a la atmósfera, permite que los conductores pierdan horas de trabajo al volante y evita el deterioro de las infraestructuras terrestres, con el consiguiente ahorro en mantenimiento. La viabilidad de una Autopista del Mar depende tanto de factores de ubicación geográficos, como de características propias del puerto, pasando por los diferentes requerimientos del mercado en cada momento (energéticos, medio ambientales y tecnológicos). Existe un elemento nuevo creado por la Comisión Europea: la red transeuropea de transportes (RTE-T). En el caso de España, con sus dos accesos por los Pirineos (La Junquera e Irún) como únicos pasos terrestres de comunicación con el continente y con importantes limitaciones ferroviarias debido a los tres anchos de vía distintos, le resta competitividad frente al conjunto europeo; por el contrario, España es el país europeo con más kilómetros de costa (con más de 8.000 km) y con un emplazamiento geográfico estratégico, lo que le convierte en una plataforma logística para todo el sur de Europa, por lo que las Autopistas del Mar tendrán un papel importante y casi obligado para el desarrollo de los grandes corredores marítimos que promueve Europa. De hecho, Gijón y Vigo lo han hecho muy bien con sus respectivas líneas definidas como Autopistas del Mar y que conectan con el puerto francés de Nantes-Saint Nazaire, ya que desde ahí los camiones pueden coger rutas hacia el Norte. Paralelamente, la Unión Europea ha iniciado los pasos para el impulso de la primera Autopista del Mar que conectará España con el mercado de Reino Unido, concretamente los Puertos de Bilbao y Tilbury. Además, España e Italia sellaron un acuerdo internacional para desarrollar Autopistas del Mar entre ambos países, comprometiéndose a impulsar una docena de rutas entre puertos del litoral mediterráneo español y el italiano. Actualmente, están en funcionando los trayectos como Barcelona-Génova, Valencia-Civitavecchia y Alicante- Nápoles, notablemente más cortos por mar que por carretera. Bruselas identificó cuatro grandes corredores marítimos que podrían concentrar una alta densidad de tráfico de buques, y en dos de ellos España ya tenía desde un principio un papel crucial. La Comisión diseñó el 14 de abril de 2004, a través del proyecto West-Mos, una red de tráfico marítimo que tiene como vías fundamentales la denominada Autopista del Báltico (que enlaza Europa central y occidental con los países bálticos), la Autopista de Europa suroriental (que une el Adriático con el Jónico y el Mediterráneo más oriental) y también la Autopista de Europa occidental y la Autopista de Europa suroccidental (que enlazan España con Reino Unido y la Francia atlántica y con la Francia mediterránea e Italia, respectivamente). Para poder establecer Autopistas del Mar entre la Península Ibérica y el Norte de Europa primará especialmente la retirada de camiones en la frontera pirenaica, donde el tráfico pesado tiene actualmente una intensidad media diaria de 8.000 unidades, actuando sobre los puntos de mayor congestión, como por ejemplo los Alpes, los Pirineos, el Canal de la Mancha, las carreteras fronterizas de Francia y Euskadi, y proponiendo el traslado de las mercancías en barcos o en trenes. Por su parte, para contar con los subsidios y apoyos europeos las rutas seleccionadas como Autopistas del Mar deben mantener una serie de criterios de calidad relacionados con la frecuencia, coste “plataforma logística a plataforma logística”, simplicidad en procedimientos administrativos y participación de varios países, entre otros. Los estudios consideran inicialmente viables los tramos marítimos superiores a 450 millas, con un volumen de unas 15.000 plataformas al año y que dispongan de eficientes comunicaciones desde el puerto a las redes transeuropeas de autopistas y ferrocarril. Otro objetivo de las Autopistas del Mar es desarrollar las capacidades portuarias de forma que se puedan conectar mejor las regiones periféricas a escala del continente europeo. En lo que a Puertos se refiere, las terminales en los muelles deben contar con una línea de atraque de 250 m., un calado superior a 8 m., una rampa “ro-ro” de doble calzada, grúas portainer, y garantizar operatividad para un mínimo de dos frecuencias de carga semanales. El 28 de marzo de 2011 se publicó el segundo Libro Blanco sobre el futuro del transporte en Europa “Hoja de ruta hacia un espacio único europeo de transporte: por una política de transportes competitiva y sostenible”, donde se definió el marco general de las acciones a emprender en los próximos diez años en el ámbito de las infraestructuras de transporte, la legislación del mercado interior, la reducción de la dependencia del carbono, la tecnología para la gestión del tráfico y los vehículos limpios, así como la estandarización de los distintos mercados. Entre los principales desafíos se encuentran la eliminación de los cuellos de botella y obstáculos diversos de nuestra red europea de transporte, minimizar la dependencia del petróleo, reducir las emisiones de GEI en un 60% para 2050 con respecto a los niveles de 1990 y la inversión en nuevas tecnologías e infraestructuras que reduzcan estas emisiones de transporte en la UE. La conexión entre la UE y el norte de África provoca elevados niveles de congestión en los puntos más críticos del trayecto: frontera hispano-francesa, corredor del Mediterráneo y el paso del estrecho. A esto se le añade el hecho de que el sector del transporte por carretera está sujeto a una creciente competencia de mercado motivada por la eliminación de las barreras europeas, mayores exigencias de los cargadores, mayores restricciones a los conductores y aumento del precio del gasóleo. Por otro lado, el mercado potencial de pasajeros tiene una clara diferenciación en tipos de flujos: los flujos en el período extraordinario de la Operación Paso del Estrecho (OPE), enfocado principalmente a marroquíes que vuelven a su país de vacaciones; y los flujos en el período ordinario, enfocado a la movilidad global de la población. Por tanto, lo que se pretende conseguir con este estudio es analizar la situación actual del tráfico de mercancías y pasajeros con origen o destino la península ibérica y sus causas, así como la investigación de las ventajas de la creación de una conexión marítima (Autopista del Mar) con el Norte de África, basándose en los condicionantes técnicos, administrativos, económicos, políticos, sociales y medio ambientales. The competitiveness of freight transport depends on the condition and operation of existing networks and infrastructure, not the mode of transport. In particular, profitability could be increased or production costs of maritime transport could be reduced by using vessels with greater capacity and developing port distribution platforms or dry ports, seeing as 90% of trade between the European Union and third countries happens through its ports. On average 3,2 billion tonnes of freight are handled annualy and 40% of intra-European traffic uses Short Sea Shipping. In spite of European ports annually hosting more than 400 million passengers, there have been major developments in the northern European ports (Rotterdam, Antwerp, Amsterdam). Southern European countries need to find new ways to be more competitive, either by building new infrastructure or by strengthening existing infrastructure, offering costs northern ports. The use of maritime and river transport as an alternative to road transport, especially Short Sea Shipping, has been driven by the European Commission (EC) from 2003 through community support programs for the Motorways of the Sea. These programs include, for example, the Marco Polo I and II programs, which had a total budget of 855 million euros for the period 2003-2013. During this time objectives were set for reducing road congestion, improving the environmental performance of the freight transport system within the community and enhancing intermodal transport. The “Motorway of the Sea” concept arises in the European Commission’s Transport White Paper "European transport policy for 2010: time to decide" on 12 December 2001, as part of a European policy for the development and promotion of sustainable transport systems. A Motorway of the Sea is defined as a short sea route between two points, covering less distance than by road, which provides a significant improvement in intermodal transport times and to the cost supply chain. It contributes to reducing accidents, noise and CO2 emissions, allows drivers to shorten their driving time and prevents the deterioration of land infrastructure thereby saving on maintenance costs. The viability of a Motorway of the Sea depends as much on geographical location factors as on characteristics of the port, taking into account the different market requirements at all times (energy, environmental and technological). There is a new element created by the European Commission: the trans-European transport network (TEN-T). In the case of Spain, with its two access points in the Pyrenees (La Junquera and Irun) as the only land crossings connected to the mainland and major railway limitations due to the three different gauges, it appears less competitive compared to Europe as a whole. However, Spain is the European country with the most kilometers of coastline (over 8,000 km) and a strategic geographical location, which makes it a logistics platform for the all of Southern Europe. This is why the Motorways of the Sea will have an important role, and an almost necessary one to develop major maritime corridors that Europe supports. In fact, Gijon and Vigo have done very well with their respective sea lanes defined as Motorways of the Sea and which connect with the French port of Nantes-Saint Nazaire, as from there trucks can use nort-heading routes. In parallel, the European Union has taken the first steps to boost the first Motorway of the Sea linking Spain to the UK market, specifically the ports of Bilbao and Tilbury. Furthermore, Spain and Italy sealed an international agreement to develop Motorways of the Sea between both countries, pledging to develop a dozen routes between ports on the Spanish and Italian Mediterranean coasts. Currently, there are sea lanes already in use such as Barcelona-Genova, Valencia-Civitavecchia and Alicante-Naples, these are significantly shorter routes by sea than by road. Brussels identified four major maritime corridors that could hold heavy concentrate shipping traffic, and Spain had a crucial role in two of these from the beginning. On 14 April 2004 the Commission planned through the West-Mos project, a network of maritime traffic which includes the essential sea passages the so-called Baltic Motorway (linking Central and Western Europe with the Baltic countries), the southeast Europe Motorway (linking the Adriatic to the Ionian and eastern Mediterranean Sea), the Western Europe Motorway and southwestern Europe Motorway (that links Spain with Britain and the Atlantic coast of France and with the French Mediterranean coast and Italy, respectively). In order to establish Motorways of the Sea between the Iberian Peninsula and Northern Europe especially, it is necessary to remove trucks from the Pyrenean border, where sees heavy traffic (on average 8000 trucks per day) and addressing the points of greatest congestion, such as the Alps, the Pyrenees, the English Channel, the border roads of France and Euskadi, and proposing the transfer of freight on ships or trains. For its part, in order to receive subsidies and support from the European Commission, the routes selected as Motorways of the Sea should maintain a series of quality criteria related to frequency, costs "from logistics platform to logistics platform," simplicity in administrative procedures and participation of several countries, among others. To begin with, studies consider viable a maritime stretch of at least 450 miles with a volume of about 15,000 platforms per year and that have efficient connections from port to trans-European motorways and rail networks. Another objective of the Motorways of the Sea is to develop port capacity so that they can better connect peripheral regions across the European continent. Referring ports, the terminals at the docks must have a berthing line of 250 m., a draft greater than 8 m, a dual carriageway "ro-ro" ramp, portainer cranes, and ensure operability for a minimum of two loads per week. On 28 March 2011 the second White Paper about the future of transport in Europe "Roadmap to a Single European Transport Area – Towards a competitive and resource efficient transport system" was published. In this Paper the general framework of actions to be undertaken in the next ten years in the field of transport infrastructure was defined, including internal market legislation, reduction of carbon dependency, traffic management technology and clean vehicles, as well as the standardization of different markets. The main challenges are how to eliminate bottlenecks and various obstacles in our European transport network, minimize dependence on oil, reduce GHG emissions by 60% by 2050 compared to 1990 levels and encourage investment in new technologies and infrastructure that reduce EU transport emissions. The connection between the EU and North Africa causes high levels of congestion on the most critical points of the journey: the Spanish-French border, the Mediterranean corridor and Gibraltar Strait. In addition to this, the road transport sector is subject to increased market competition motivated by the elimination of European barriers, greater demands of shippers, greater restrictions on drivers and an increase in the price of diesel. On the other hand, the potential passenger market has a clear differentiation in type of flows: flows in the special period of the Crossing the Straits Operation (CSO), mainly focused on Moroccans who return home on vacation; and flows in the regular session, focused on the global mobile population. Therefore, what I want to achieve with this study is present an analysis of the current situation of freight and passengers to or from the Iberian Peninsula and their causes, as well as present research on the advantages of creating a maritime connection (Motorways of the Sea) with North Africa, based on the technical, administrative, economic, political, social and environmental conditions.

El perfil de los consumidores de productos de comercio justo. Análisis de las variables que influyen en su intención de compra

El consumo mundial, impulsor del desarrollo y crecimiento económico de los pueblos, no ha sido igual para todas las naciones, ya que sus efectos han sido diferentes para los ciudadanos de los países del Norte y los del Sur, principalmente por dos razones: una, porque han originado complejos y diferentes estilos de vida y aspiraciones, lo que ha originado grandes diferencias entre los individuos de unos y otros países, y, dos, por su falta de valores sociales y éticos. Ante esta situación, la sociedad en su conjunto debe tomar conciencia de este hecho, y a través de un consumo responsable y de un mayor conocimiento de las relaciones comerciales entre los pueblos, debe optar por consumir productos elaborados bajo criterios de justicia y equidad. Para ayudar a alcanzar estos objetivos de equidad, solidaridad, justicia y ética, nació el Comercio Justo, que, en el caso de España, llegó con veinte años de retraso en la década de los ochenta. Aunque a día de hoy sus ventas crecen a un buen ritmo, siguen siendo inferiores al resto de los países europeos, por cuatro razones: (1) el desconocimiento que la mayoría de los potenciales consumidores tienen de este movimiento social; (2) la dificultad de acceder a los productos que comercializan; (3) el poco impulso que se ofrece desde las Administraciones Públicas; y, (4) porque hay pocas investigaciones en las que se haya analizado el Comercio Justo desde la perspectiva de la demanda, lo que ha implicado que no haya un conocimiento profundo sobre los consumidores de este tipo de productos y sobre sus motivaciones de compra. En base a todo lo expuesto, el presente trabajo se concibe como un estudio exploratorio, que tiene como objetivo principal analizar el perfil de los consumidores y no consumidores de productos de Comercio Justo, sus motivaciones de compra y no compra, así como las variables que influyen en la intención de compra futura, tanto en el segmento de consumidores actuales, como en el segmento de no consumidores de este tipo de productos. Para la realización de este trabajo, se ha utilizado, por una parte, una metodología cualitativa, que ha permitido acceder a la información sobre las opiniones y actitudes que intervienen en los procesos de decisión de compra; y, por otra, una metodología cuantitativa, a través de una encuesta online dirigida a 6.500 individuos, que ha permitido tener información, a través de sendos análisis descriptivos univariante y bivariante, de los individuos encuestados sobre el objeto del estudio. Para validar los modelos y contrastar las hipótesis planteadas, se ha utilizado el análisis de fiabilidad y validación de las escalas de medición seleccionadas (Alpha de Cronbach); el análisis factorial exploratorio, para comprobar la dimensionalidad y validez convergente de las escalas de medida; el análisis factorial confirmatorio, para validar la idoneidad de los modelos de medida propuestos; la regresión logística, para comprobar la validez del modelo general de la probabilidad de la compra o no compra de productos de Comercio Justo; y la regresión lineal múltiple, para comprobar la validez de los modelos específicos de intención de compra futura en los segmentos de compradores y de no compradores. Para realizar todos estos análisis, se han utilizado las herramientas informáticas SPSS v21 y AMOS. Las principales conclusiones del trabajo son: (1) que se deben establecer unos criterios claros que definan quién es quién en el movimiento de Comercio Justo, sus fines, sus objetivos, los productos que comercializan, así como su funcionamiento y desarrollo en España; (2) que, a pesar de las grandes ventajas y posibilidades del Comercio Justo, hay una falta de demanda de estos productos por parte de los consumidores responsables, debido principalmente a la falta de información-comunicación sobre el propio movimiento, y, muy especialmente, a la falta de información sobre los productos, los canales de comercialización, las políticas de precios, las políticas de comunicación, etc., y a la necesidad de que estos productos estén accesibles en los lugares donde los consumidores hacen su compra habitual; y (3) que el Comercio Justo español debe afrontar una serie de desafíos, como son la coordinación entre las diferentes organizaciones que participan en su desarrollo; la sensibilización de los consumidores; la creación de una imagen de marca que defina de una manera clara y sencilla qué es el Comercio Justo; la orientación al cliente y no al producto; y extender la red de comercialización de productos de Comercio Justo a los canales donde los consumidores hacen su compra habitualmente. ABSTRACT Global consumption, the driver of economic growth and development of nations, is not the same for all countries, since its effects have been different on people coming from the North or the South. This is due mainly to two reasons: firstly, because they have developed complex and different lifestyles and aspirations, which have led to significant differences between individuals of one country and another and secondly, because they lack social and ethical values. Given this situation, society as a whole should be aware of this fact, and through responsible consumption and a greater knowledge of trade relations between countries, should opt for consuming products produced with criteria of justice and equity. Fair Trade began as a way to help reach these goals of equity, solidarity, justice and ethics. In the case of Spain it did not start until 20 years later, in the eighties. Although today sales of Fair Trade products are growing at a good rate, they are still below that of other European countries, for four reasons: (1) unawareness of this social movement; (2) the difficult access to these products; (3) insufficient government support; (4) the limited research carried out to analyse Fair Trade from the perspective of demand, resulting in a lack of knowledge about this type of consumer and their purchasing motivations. Based on the above, the present study is designed as an exploratory investigation, aimed at analyzing the profile of consumers and non-consumers of Fair Trade, their motivations for buying and not buying, as well as the variables which influence future purchase intention in both the current consumer segment, and the non-user segment of such products. To carry out this study we have used, on the one hand, a qualitative methodology, to obtain information about the views and attitudes involved in the purchase decision process; and on the other, a quantitative methodology, through an online survey of 6,500 individuals, which provided information through two separate univariate and bivariate descriptive analysis, of the individuals interviewed about the object of this study. To validate the models and contrast hypotheses, we have used the reliability analysis and validation of the selected measurement scales (Cronbach's Alpha); exploratory factor analysis to verify the dimensionality and convergent validity of the measurement scales; confirmatory factor analysis to validate the adequacy of the models of measurement proposed; logistic regression, to verify the validity of the general model of the probability of buying or not buying Fair Trade products; and multiple linear regression to test the validity of specific models in future purchase intention in the segments of buyers and non-buyers. To carry out these analyses, we used SPSS v21 software tools and AMOS. The principal conclusions of the investigation are: (1) the need to establish clear criteria which define who is who in the Fair Trade movement, its goals, objectives, the products they sell, as well as its operation and development in Spain; (2) that despite the great advantages and possibilities of Fair Trade, there is a lack of demand for these products by responsible consumers, mainly due to the lack of information-communication about the movement itself, and especially on the range of products, sales channels, pricing policies, communication policies, etc., and the need for these products to be available in places where consumers make their usual purchase; and (3) that Spanish Fair Trade must address a number of challenges such as: coordination between the different organizations involved in trade development; consumer awareness; creation of a brand image that defines in a clear and simple way what Fair Trade is; focus on the customer rather than the product; and expansion of the network of Fair Trade sales outlets to include the channels where consumers usually make their purchases.

La aplicación de métodos estadísticos en la valoración masiva de inmuebles: una propuesta de regulación en el marco normativo del Banco de España

Las valoraciones automatizadas (AVM según sus siglas en inglés) son modelos matemáticos de valoración que permiten estimar el valor de un inmueble o una cartera de inmuebles mediante la utilización de información de mercado previamente recogida y analizada. Las principales ventajas de los modelos AVM respecto a las valoraciones tradicionales son su objetividad, rapidez y economía. Existe regulación al respecto y estándares profesionales en otros países, no obstante en España los criterios de valoración mediante modelos AVM siguen siendo excesivamente básicos, al no establecer procesos concretos ni distinguir entre los diversos métodos estadísticos existentes y la aplicación adecuada de los mismos. Por otra parte, desde la publicación de la Circular 3/2008 del Banco de España se ha extendido el uso de este tipo de valoraciones en España para la actualización de valor de inmuebles en garantía de préstamos hipotecarios. La actual desregularización en nuestro país en cuanto a normativa de valoraciones automatizadas nos permite plantear propuestas y metodologías con el fin de aportar un punto de vista nuevo desde la investigación, la experiencia en otros países y la práctica empresarial más reciente. Este trabajo de investigación trata de sentar las bases de una futura regulación en España en materia de valoraciones masivas adaptadas al marco hipotecario español. ABSTRACT The Automated Valuation Models (AVM) are mathematically based valuation models that allow to estimate the value of a property or portfolio of properties by using market information previously collected and analyzed. The main advantages of the AVMs in comparison to traditional valuations are the objectivity, speed and economy. In other countries there is regulation and standards regarding the use of AVMs. However, in Spain the norms that apply to AVM valuations are still too basic, since these norms do not define specific processes and do not distinguish between the different statistical approaches available and their correct use. On the other hand, following the ratification of the 3/2008 Bank of Spain Circular the use of AVM models in Spain for the value update of mortgaged properties has increased. The current deregulation in Spain regarding Automated Valuation Models allows to provide propositions and methodologies in order to offer a new point of view based on the research, experience in other countries and the most recent professional practice. The present research thesis aims to provide basic principles and criteria for a future Spanish regulation on massive valuation in the context of the Spanish mortgage framework.

Understanding social enterprise country models: Spain

Purpose – The purpose of this paper is to describe the historical institutional context of Spain in the past 40 years and to analyze the influence of institutional factors in the current model of social enterprise existing in the country. Design/methodology/approach – This study draws on the theory of historical institutionalism, national-level empirical data and Kerlin conceptual framework (2013) that informs models of social enterprise. Findings – This paper describe some traits of Spain’s social enterprise that can be explained by the evolution of its institutional context in the past 40 years. It helps to validate, from a historical institutionalistic perspective, aspects of the Kerlin framework for social enterprise models. It also begins to show that the analysis of regional differences in the context should be taken into consideration when examining a country’s social enterprise space. Research limitations/implications – This discussion paper encourages academics to analyze regional differences in the emergence of social enterprise within a country. The main limitation of the paper is the lack of an “official” definition of social enterprise in Spain. Originality/value – This paper applies a valuable framework to a country with a unique political and economic history in the past 40 years. It contributes to enrich the research on the emergence and development of social enterprises in a variety of contexts and advances understanding of how regional differences inside a country influence the development of social enterprises.